official journal of the patent office...the patent office journal no. 15/2019 dated 12/04/2019 16255...

The Patent Office Journal No. 15/2019 Dated 12/04/2019 16254

पेटेंट कार्ाालर्

शासकीर् जर्ाल

OFFICIAL JOURNAL

OF

THE PATENT OFFICE

नर्र्ामर् सं. 15/2019 शकु्रवार दिर्ाकं: 12/04/2019

ISSUE NO. 15/2019 FRIDAY DATE: 12/04/2019

पटेेंट कार्ाालर् का एक प्रकाशर् PUBLICATION OF THE PATENT OFFICE


INTRODUCTION

In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005

effective from 01st January 2005, the Official Journal of The Patent Office is required to be published under

the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings

on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on

this Official Journal and other information as required by the public should be addressed to the Controller

General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that

the content can be enriched.

( Om Prakash Gupta ) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

12th

APRIL, 2019


CONTENTS

SUBJECT PAGE NUMBER

JURISDICTION : 16257 - 16258

SPECIAL NOTICE : 16259 - 16260

EARLY PUBLICATION (DELHI) : 16261 - 16263

EARLY PUBLICATION (MUMBAI) : 16264 - 16265

EARLY PUBLICATION (CHENNAI) : 16266 - 16269

EARLY PUBLICATION ( KOLKATA) : 16270

PUBLICATION AFTER 18 MONTHS (DELHI) : 16271 - 16531

PUBLICATION AFTER 18 MONTHS (MUMBAI) : 16532 - 16586

PUBLICATION AFTER 18 MONTHS (CHENNAI) : 16587 - 16754

PUBLICATION AFTER 18 MONTHS (KOLKATA) : 16755 - 16773

WEEKLY ISSUED FER (DELHI) : 16774 - 16794

WEEKLY ISSUED FER (MUMBAI) : 16795 - 16803

WEEKLY ISSUED FER (CHENNAI) : 16804 - 16825

WEEKLY ISSUED FER (KOLKATA) : 16826 - 16832

APPLICATION(S) FOR RESTORATION OF LAPSED PATENT(S)

PUBLICATION U/S 61(1) RULE 84(3) JURISDICTION: PATENT

OFFICE DELHI

: 16833

PUBLICATION U/R 84(3) IN RESPECT OF APPLICATION FOR

RESTORATION OF PATENT(CHENNAI) : 16834

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE

GRANT (DELHI) 16835 - 16846


GRANT (MUMBAI) : 16847 - 16851


GRANT (CHENNAI) : 16852 - 16861


GRANT (KOLKATA) : 16862 - 16866

INTRODUCTION TO DESIGN PUBLICATION : 16867

THE DESIGNS ACT, 2000 SECTION 30 DESIGN ASSIGNMENT

16868

CANCELLATION PROCEEDINGS UNDER SECTION 19 OF THE

DESIGNS ACT, 2000 & DESIGNS (AMENDMENT) RULES, 2008 : 16869

REGISTRATION OF DESIGNS : 16870 - 16940


THE PATENT OFFICE

KOLKATA, 12/04/2019

Address of the Patent Offices/Jurisdictions

The following are addresses of all the Patent Offices located at different places having their Territorial

Jurisdiction on a Zonal basis as shown below:- 1 Office of the Controller General of Patents,

Designs & Trade Marks, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill, Mumbai – 400 037

Phone: (91)(22) 24123311, Fax : (91)(22) 24123322 E-mail: [email protected]

4 The Patent Office, Government of India, Intellectual Property Rights Building, G.S.T. Road, Guindy, Chennai – 600 032. Phone: (91)(44) 2250 2081-84 Fax : (91)(44) 2250 2066 E-mail: [email protected]

The States of Andhra Pradesh, Telangana, Karnataka, Kerala, Tamil Nadu and the Union Territories of Puducherry and Lakshadweep.

2 The Patent Office, Government of India, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill,

Mumbai – 400 037 Phone: (91)(22) 24137701 Fax: (91)(22) 24130387

E-mail: [email protected] The States of Gujarat, Maharashtra, Madhya

Pradesh, Goa and Chhattisgarh and the Union Territories of Daman and Diu & Dadra and Nagar Haveli

5

The Patent Office (Head Office), Government of India, Boudhik Sampada Bhavan, CP-2, Sector –V, Salt Lake City, Kolkata- 700 091 Phone: (91)(33) 2367 1943/44/45/46/87 Fax: (91)(33) 2367 1988 E-Mail: [email protected]

Rest of India 3

The Patent Office, Government of India, Boudhik Sampada Bhavan, Plot No. 32., Sector-14, Dwarka, New Delhi – 110075 Phone: (91)(11) 25300200 & 28032253 Fax: (91)(11) 28034301 & 28034302 E.mail: [email protected]

The States of Haryana, Himachal Pradesh, Jammu and Kashmir, Punjab, Rajasthan, Uttar Pradesh, Uttaranchal, Delhi and the Union Territory of Chandigarh.

Website: www.ipindia.nic.in www.patentoffice.nic.in All applications, notices, statements or other documents or any fees required by the Patents Act, 1970

and The Patents (Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received

only at the appropriate offices of the Patent Office. Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of

Patents drawn on a scheduled Bank at the place where the appropriate office is situated.

mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]://www.ipindia.nic.in/


पेटेंट कार्ाालर्

कोलकाता, दिर्ाकं 12/04/2019

•कार्ाालर्ों के क्षते्रानिकार के पत े

नवनिन्न जर्हों पर नथित पेटेंट कार्ाालर् के पते आचंनलक आिार पर िर्शात उर्के प्रािनेशक अनिकार क्षते्र के

साि र्ीच ेदिए र्ए है:-

1 कार्ाालर् : महानर्र्तं्रक, एकथव, अनिकल्प

तिा व्यापार नचहर्,

एंटोप नहल डाकघर के समीप,

एस. एम. रोड, एंटोप नहल, ममु्बई- 400 037, िारत,

फोर्: (91) (22) 24123311

फ़ैक्स: (91) (22) 24123322

ई. मेल: [email protected]

4 पटेेंट कार्ाालर्, िारत सरकार

इंटेलेक्चअुल प्रॉपटी राइट्स नबलल्डंर्, इंडनथिर्ल इथटेट

एसआईडीसीओ आरएमडी र्ोडाउर् एररर्ा

एडजसने्ट टु ईर्ल फ्लाथक, जी. एस. टी. रोड,

र्ार्न्डी

चने्नई - 600 032.

फोर्: (91)(44) 2250 2081-84

फ़ैक्स: (91)(44) 2250-2066


आन्र प्रिेश, तलेंर्ार्ा, कर्ााटक, केरल, तनमलर्ाडु

तिा पडुुचरेी राज्र् क्षते्र एवं सघं शानसत क्षते्र,

लक्षिीप


बौनिक सपंिा िवर्,

एंटोप नहल डाकघर के समीप,

एस. एम. रोड, एंटोप नहल, ममु्बई- 400 037,

फोर्: (91) (22) 24137701

फ़ैक्स: (91) (22) 24130387


•र्जुरात, महाराष्ट्र, मध्र् प्रिेश, र्ोवा तिा छत्तीसर्ढ़ राज्र् क्षते्र एव ंसघं शानसत क्षते्र, िमर् तिा िीव, िािर और र्र्र हवलेी.

5 पटेेंट कार्ाालर्, िारत सरकार कोलकाता, (प्रिार् कार्ाालर्)


सीपी-2, सेक्टर- V, साल्ट लेक नसटी,

कोलकाता-700 091, िारत.

फोर्: (91)(33) 2367 1943/44/45/46/87

फ़ैक्स:/Fax: (91)(33) 2367 1988


िारत का अवशेष क्षते्र



प्लॉट स.ं 32, सके्टर- 14, द्वारका, र्ई दिल्ली- 110 075.

फोर्: (91)(11) 25300200, 28032253

फ़ैक्स: (91)(11) 28034301, 28034302


हररर्ाणा, नहमाचल प्रिेश, जम्मू तिा कश्मीर, पजंाब,राजथिार्,

उत्तर प्रिेश, दिल्ली तिा उत्तराचंल राज्र् क्षते्रों, एवं सघं शानसत

क्षते्र चडंीर्ढ़

वेबसाइट: http://www.ipindia.nic.in www.patentoffice.nic.in

पटेेंट अनिनर्र्म, 1970 तिा पटेेंट (सशंोिर्) अनिनर्र्म, 2005 अिवा पटेेंट (सशंोिर्) नर्र्म, 2006 द्वारा वानंछत सिी

आवेिर्, सूचर्ाए, नववरण र्ा अन्र् िथतावेज़ र्ा कोई शलु्क पटेेंट कार्ाालर् के केवल उपर्कु्त कार्ाालर् में थवीकृत होंर्े।

शलु्क: शलु्क र्ा तो र्र्ि रूप में र्ा Controller of Patents के र्ाम में िेर् बैंक ड्राफ्ट र्ा चके के द्वारा िजेी जा सकती ह ैजो उसी

थिार् के दकसी अर्ुसनूचत बैंक में प्रित्त हो जहााँ उपर्कु्त कार्ाालर् नथित ह ै।

mailto:[email protected]:[email protected]:[email protected]://www.ipindia.nic.in/


SPECIAL NOTICE

18 Months publication as required under Section 11A of the Patents Act, 1970

as amended by the Patents (Amendment) Act, 2005.

Notice is hereby given that any person at any time before the grant of Patent may give representation by way of

opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under

section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules,

2006.

Notice is also given that if any interested person requests for copies of the complete specification, drawing and

abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as

per the jurisdiction on payment of prescribed fees of Rs.8/- per page. If any further details are required to be

obtained, the same can be provided by the respective Patent Offices on request.

(Om Prakash Gupta) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS


SPECIAL NOTICE

Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005

and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III,

Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published

containing all the activities of The Patent Office such as publication of all the patent applications after 18th

months , grant of patents & all other information in respect of the proceedings as required under the provisions

of the Patents (Amendment) Act, 2005 and Rules there under on weekly basis on every Friday.

The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are

discontinued from 01/01/2009.

SPECIAL NOTICE

Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.

However, if duplication of publication of any application is found, then earlier date of publication will be taken

for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months

from the date of second publication, provided that there is there is no third party representation.


Early Publication: The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule

24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of

Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents

(Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006:

(12) PATENT APPLICATION PUBLICATION (21) Application No.201911011923 A

(19) INDIA

(22) Date of filing of Application :27/03/2019 (43) Publication Date : 12/04/2019

(54) Title of the invention : SYSTEM AND METHOD FOR NAVIGATION

(51) International classification :G01C21/00

(31) Priority Document No :NA

(32) Priority Date :NA

(33) Name of priority country :NA

(86) International Application No

Filing Date

:NA

:NA

(87) International Publication No : NA

(61) Patent of Addition to Application Number

Filing Date

:NA

:NA

(62) Divisional to Application Number

Filing Date

:NA

:NA

(71)Name of Applicant :

1)HCL Technologies Limited Address of Applicant :A-9, Sector - 3, Noida 201 301, Uttar

Pradesh, India Uttar Pradesh India

(72)Name of Inventor :

1)GUPTA, Akhilesh Kumar

2)RASTOGI, Mayank Babu

(57) Abstract :

Disclosed is a method and system for suggesting routes to a user, to reach a destination. The method comprises receiving ratings for

routes used by users to reach their destinations. The ratings may be provided on a navigation application, and may depend on

experiences of the users travelling through the routes. The routes may be partitioned into segments. Segments associated with the bad

ratings may be identified using a mutual exclusion technique. Individual ratings may be assigned to the segments associated with the

bad ratings and the good ratings. Routes may be suggested to the users for reaching the destination along with ratings associated with

the routes. The ratings associated with the routes may be determined based on weightage of the individual ratings of the segments

present in the routes suggested to the user. [To be published with Figure 4]

No. of Pages : 20 No. of Claims : 21



(19) INDIA


(54) Title of the invention : A MECHANICAL SCRIBER TO ISOLATE SOLAR CELLS DURING MONOLITHIC FABRICATION

OF ORGANIC SOLAR CELL MODULES ON SUBSTRATES

(51) International classification :H01L31/042





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)INDIAN INSTITUTE OF TECHNOLOGY KANPUR Address of Applicant :Dean, Research & Development, Room

Number 151, Faculty Building, Post Office: IIT Kanpur Kanpur

Uttar Pradesh India 208016 Uttar Pradesh India


1)JAYARAMAN, Eswaran

2)IYER, S. Sundar, Kumar

(57) Abstract :

The present disclosure relates to a personal electronic card (PEC) device for facilitating one or more transactions associated with one

or more bank accounts of a user. The device includes a touch enabled display screen configured to receive an input from a user,

wherein the received input is used to initiate a transaction; an optical sensor configured to sense an identifier associated with the

transaction, wherein the identifier is used to validate the initiated transaction, and wherein the identifier comprises a QR code or a bar

code; and a biometric sensor configured to sense an attribute associated with the user, wherein the sensed attribute is used to

authenticate the user, and wherein based on positive authentication of the user the one or more transactions are executed.




(19) INDIA


(54) Title of the invention : INVENTION OF COOKIES FORTIFIED WITH SPIRULINA ALGAE

(51) International classification :A21D





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)DR. AMMATUL FATIMA Address of Applicant :226, E/1 RAJAPUR, ALLAHABAD,

UTTAR PRADESH-211001, INDIA Uttar Pradesh India


1)DR. AMMATUL FATIMA

2)DR. SANGITA SRIVASTAVA

(57) Abstract :

Background: - Ironis an important constituent of hemoglobin and its deficiency is the main etiological factor responsible for

nutritional anemia. A recent survey by the state department of medical health and family revealed that 1.84 lakhs peoples are anemic

thats why researcher interested to do the work. The best strategy to correct the nutritional deficiencies is the food based approach

where nutrient rich food supplements are formulatedfivith nutrient rich.familiar. foods. Introduction: - The present invention was

undertaken to assess the nutritional composition of spirulina powder, development of spirulina based products their nutritional

composition and shelf life. Spirulina is a natural algae powder that is incredibly high in protein and a good source of antioxidants, B-

vitamins and other useful nutrients. Method: -.spirulina fortified cookies were prepared by mixing spirulina powder along with other

ingredients by the researcher. After analysis, it was found that biscuits fortified with spirulina were significantly high in various

nutrients. The products was assessing for their nutritional content. Intervention was also performed mean hemoglobin of subjects was

appeared to be 7.7 gm/dl. Clinical investigation observed that 100 % subjects were suffering from anemia,-out of which 45% of

subjects were showing the signs of iron deficiency anemia like pale conjunctiva (48%) and pale nails (34%). The fortified cookies

were assessed in a food laboratory. Result: - After analysis, it was found that the spirulina fortified product contains 2.55 percent

moisture, 6.25 percent proteins, 20.43 percent fat, 1.18 percent crude fibre, 4.07 percent ash, 288.98 percent calcium, 115.92 percent

phosphorus and 3.94 percent iron whereas control samples contained 2.77 percent moisture, 4.49 percent proteins, 17.59 percent fat,

0.68 percent crude fibre, 3.08 percent ash, 214.15 percent calcium, 54.34 percent phosphorus, 1.87 percent iron respectively.

Conclusion: - The products have satisfactory quality at the end of three months of storage period. Tnterveritibn program brought out

the significant (P < 0.05) increment in hemoglobin level as 1.66 gm/dl in experimental group and not significant increment noted for

control group. Hence the intervention was significantly effective for correcting iron deficiency anemia. Thus, spinilina based products

may be beneficial for vulnerable population due to its high nutritive value. These would also be advantageous for those who are

suffering from degenerative diseases because of its therapeutic properties. Figures:- (Showing Development of Spirulina Fortified

Cookies)




(19) INDIA


(54) Title of the invention : ROTATING EXERCISE EQUIPMENT

(51) International classification

:A47B

13/00

A47C

9/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Ashish Sethiya Address of Applicant :3/H/81, Kalpatru Aura, Ghatkopar

West,Mumbai 400086, Maharashtra, India Maharashtra India


1)Ashish Sethiya

(57) Abstract :

A rotating exercise equipment is disclosed, that is easily usable at any place which also has other utilities along with utilization for

physical exercise. It is designed by alternating the use of traditional practices and techniques that were used to carry out the day to day

task. The exercise equipment comprises of two circular plates that are placed coinciding/overlapping each other in one plane wherein

the upper plate is movable in rotational motion in the same plane and the lower plate also in the same plane is fixed to the stand. The

stand has four legs and the square frame that mounts the two circular plates. In an alternative embodiment, the stand can be of

different shape or material. The two plates are connected by the shaft with upper plate consisting of the handle at the periphery which

is used to rotate the upper plate manually. The exercise equipment has different utilities wherein it can be used as the table in house or

in work place.




(19) INDIA


(54) Title of the invention : METHOD OF MANUFACTURING MULTINARY CHALCOGENIDE SEMICONDUCTOR

NANOPARTICLES VIA NON-TOXIC HYDROTHERMAL ROUTE FOR PHOTO-VOLTAIC AND PHOTO-CATALYTIC

APPLICATIONS

(51) International classification :H01N

5/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Sharadrao Anandrao Vanalakar Address of Applicant :Karmaveer Hire Arts, Science,

Commerce and Education College (Affiliated to Shivaji

University, Kolhapur), Gargoti, Tal- Bhudargad, dist- Kolhapur

Maharashtra India

2)Jin Hyeok Kim

3)Patil Pramod Shankarrao (72)Name of Inventor :

1)Sharadrao Anandrao Vanalakar

2)Jin Hyeok Kim

3)Patil Pramod Shankarrao

(57) Abstract :

This invention relates to a manufacturing method of a multinary chalcogenide semiconductor nanoparticles derived from a non-toxic

route produced by simple and facile hydrothermal method, followed by appropriate annealing. The method can be applied to

manufacturing high yield of ternary, quaternary, pentanary metal chalcogenides. Since the obtained metal chalcogenides are of high-

purity, so, they can be utilized in various applications such as photovoltaic and photo-catalytic devices.




(19) INDIA


(54) Title of the invention : GENERATION OF ELECTRICITY FROM SOUND / SPEECH ENERGY

(51) International classification :A45F

3/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)DIPTARKA GHOSH Address of Applicant :VIT UNIVERSITY, CHENNAI-

600127, TAMIL NADU, INDIA Tamil Nadu India

2)NITHYA VENKATESAN

3)AJITH

4)ASHIS GHOSH (72)Name of Inventor :

1)DIPTARKA GHOSH

2)NITHYA VENKATESAN

3)AJITH

4)ASHIS GHOSH

(57) Abstract :

We demonstrate a next-generation backpack which generates energy from the external sound vibrations. This backpack has the

capability to capture the sound energy from different sources like, from noise, voices and etc. A microphone is used to capture these

noises which converts them to electrical signals, (around 0.1 - 0.6 Volts). Further, these signals are then fed to a transistor which

converts it to alternating current (AC). Later, this AC is passed through a transformer which steps up the voltage with its ratio (N1/N2

1000). This generated voltage which is around (600-900) Volts can be used for different purposes.




(19) INDIA


(54) Title of the invention : WASTE MANAGEMENT VACUUM BIN FOR INDIAN RAILWAYS

(51) International classification :F27B

5/05





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)NITHYA VENKATESAN Address of Applicant :SCHOOL OF ELECTRICAL

ENGINEERING, VIT UNIVERSITY, CHENNAI -600 127,

TAMILNADU, INDIA Tamil Nadu India

2)HIMANSHU VERMA

3)ABHILASH PANI

4)MANISH BHARDWAJ

5)ROHAN KEMBHAVI

6)SOURAV TRIPATHY

7)AKSHAY SATARE (72)Name of Inventor :

1)NITHYA VENKATESAN

2)HIMANSHU VERMA

3)ABHILASH PANI

4)MANISH BHARDWAJ

5)ROHAN KEMBHAVI

6)SOURAV TRIPATHY

7)AKSHAY SATARE

(57) Abstract :

Indian Railways (IR) is the fourth-largest railway network in the world by its size and second bluest ra.lway network in Asia, with

121,407 kilo meters (75,439 mi) of total track over a 67368-kilometre (41 86! mi) route, which is nearly -1.6 times the equator. The

worlds eighth-largest employer, it had I 308 milhon employees as of March 2017.lt is the biggest public sector enterprise in India and

connects the entire country. IR runs more than 13,000 passenger trains daily, on both long-distance and suburban routes from 7,349

stations across India. It is unfortunate that such a huge establishment does not have a specific policy in conserving the environment.

One of the biggest worries is the amount of solid waste (mainly paper and plastic) generated each day by train passengers across the

country. As of now, there is no comprehensive system to collect and manage this enormous amount of waste. We are proposing a

simple way to collect the sol.d waste from the moving train without any complex modifications in the bogies which can even separate

the bio degradable and non-bio degradable waste. Keywords (key words):Indian Railways, Waste Management, Solid , Paper, Plastic,

Moving Train




(19) INDIA


(54) Title of the invention : MAGLEV WHEEL CHAIR FOR RAPID INTER - FLOOR MOVEMENT

(51) International classification :B60G13/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)NITHYA V Address of Applicant :VIT UNIVERSITY CHENNAI

CAMPUS, VANDALUR, KELAMBAKKAM ROAD,

CHENNAI-600127. Tamil Nadu India

2)PRANAY SINGH

3)ABHIRUP DAS (72)Name of Inventor :

1)NITHYA V

2)PRANAY SINGH

3)ABHIRUP DAS

(57) Abstract :

Moving on a flight of stairs is a herculean task for a physically challenged person, without a need of the assistance. Rather, disabled

people prefer elevators for their easiness demanding more elevators at various places. A novel methodology to circumvent this

problem is to tap the potential of magnetic levitation to the wheelchairs. However, there is a need of mag-rails which could make the

transit possible without any difficulty and also eliminates the need of a bystander.We have proposed a unique wheel chair embedded

with a magnetic levitation technology,which can be used for the transit from one floor to the other. We also have developed a simple

mag-rails layed on the floor, to counter the magnetic action from the wheel chair. Our idea could reduce the elevator traffic drastically

during the peak hours and also helps the disabled people in their transit to various levels easily.




(19) INDIA


(54) Title of the invention : TESTING MACHINE FOR STRUCTURAL ANALYSIS

(51) International classification :G01N3/56





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)MARIYAPPAN, ARUMUGARAJA Address of Applicant :185, THIRESPURAM, NEAR SALT

UNION, TUTICORIN, TAMILNADU, INDIA - 628 001. Tamil

Nadu India

2)PONRAJ, RAMYA

3)SANJEEVA, POORNACANDRA

4)BALAKRISHNAN, PADMAPRIYA (72)Name of Inventor :

1)MARIYAPPAN, ARUMUGARAJA

2)PONRAJ, RAMYA

3)SANJEEVA, POORNACANDRA

4)BALAKRISHNAN, PADMAPRIYA

5)JAGANATHAN, NIRMALADEVI

6)JANARDHANAN, SUBASHINI

7)BALASUBRAMANI, SUMATHY

8)AKBAR BASHA, SUMAIYA BEGUM

(57) Abstract :

The present invention relates to the field of testing and evaluation of structural analysis in mechanical structure of a testing sample by

using a testing machine. The testing machine for structural analysis (1) comprises of an machine base (11), processing unit (21) and

testing unit (31) for testing the material characterized in that said testing unit (31) comprises of a motor arrangement (41) sample

testing arrangement (51), strain gauge assembly (61) providing that the sample testing arrangement (51) is sandwiched by the motor

arrangement (41) and the strain gauge assembly (61). Figure 1




(19) INDIA


(54) Title of the invention : SYSTEM AND METHOD FOR RESERVING A TOURIST GUIDE IN REAL TIME

(51) International classification :G01S11/06





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)GUIDERATNA TRAVEL & TOURISM PVT. LTD. Address of Applicant :MILKI PARA, PO-COSSIMBAZAR,

DIST-MURSHIDABAD, WEST BENGAL


1)RAMITA BISWAS

(57) Abstract :

The present disclosure provides for system and method for reserving a tourist guide in real time. The system comprises a tourist guide

registration module, which is configured to register one or more tourist guide. The system comprises a tourist registration module,

which is configured to register one or more tourists. The tourist registration module may receive tourist details and requirements. The

system comprises a processing module configured to provide available tourist guides details based on plurality of parameters. The

processing module is also configured to book selected tourist guide on required time and date and calculate and receive payment of

one or more bookings. The system comprises an administrator sub module configured to add, edit or delete one or more guides and to

block or unblock tourists. The administrator sub module is configured to track tourist activities in the system such as bookings,

transactions, rating or complaints.



Publication After 18 Months:

The following Patent Applications have been published under Section 11A (3) of The Patents (Amendment) Act, 2005. Any

Person may file representation by way of opposition to the Controller of Patents at the appropriate office against the grant of

the patent in the prescribed manner under section 25(1) of the Patents (Amendment) Act, 2005 read with the rule 55 of The

Patents (Amendment) Rules, 2006:

C(12) PATENT APPLICATION PUBLICATION (21) Application No.201611001517 A

(19) INDIA


(54) Title of the invention : DEVELOPMENT OF SEALING PROFILE USED FOR WING ACCESS COVER INSTALLATION IN

HAL BUILT DO-228 AIRCRAFT

(51) International classification :B64C37/02





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)HINDUSTAN AERONAUTICS LIMITED, TRANSPORT

AIRCRAFT DIVISION, KANPUR Address of Applicant :HINDUSTAN AERONAUTICS

LIMITED, TRANSPORT AIRCRAFT DIVISION, CHAKERI ,

POST OFFICE, HARJINDER NAGAR, KANPUR, U.P. INDIA-

208008 Uttar Pradesh India


1)JITENDER KUMAR

2)DINESH KHARE

3)A.B SINGH

(57) Abstract :

Access panel/cover is installed on the wing of Do-228 aircraft. The sealing profile with high tolerance is required to create the leak

proof joints of access panel. During the overhauling/servicing some fuel leakage/seepage were reported from location of access panel.

Development of sealing profile was taken up and fuel resistance material was selected for the part fabrication. For

manufacturing/development and- supply of Sealing Profile, one vendor was I selected who has the Type.Approved material from

CEMILAC for manufacturing rubber parts. Samples were installed on the one wing fuel tank of Do228 aircraft as per Qualification

Test Schedule (QTS). Fitment check and Functional check of Sealing Profile were carried out on the test rig and there was no seepage

or leakage found . Performance of Sealing Profile on all the parameters as per QTS was found satisfactory. This Sealing Profile can be

directly used for the installation of similar joints on any airworthy system.




(19) INDIA


(54) Title of the invention : DESIGN, DEVELOPMENT, QUALIFICATION TESTING AND RCMA APPROVAL OF DOUBLE

STRETCHER PART NO. 8007EXP175 FOR HAL BUILT DO-228 AIRCRAFT APPLICATION

(51) International classification :B64C37/02,





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA








1)MUKUL VERMA

2)MANISH KUMAR MALIK

3)DINESH KHARE

4)A B SINGH

(57) Abstract :

The Double Stretcher P/N 8007EXP175 is· utilized in D0-228 aircraft in Air-ambulance version for high speed evacuation I

transportation of injured and sick personal to a major medical facility. It is a two tier stretcher of overall length 1850 mm & width 490

mm suitable to carry 2 persons. Specially built double stretcher assemblies can be quickly removed and installed permitting rapid

configuration changes to be made. There was a requirement to develop a ·stretcher for double occupancy operation and get . it tested

and approved by Airworthiness authority for use on HAL built Do-228 aircraft.The stretchers must be arranged one upon another.

Each stretcher must be fitted with sufficient number of safety belts with metal to metal latching.A detail drawing no. 8007EXP175-

Double stretcher, 8008EXP175- Bottom stretcher, 8009EXP175 - Top stretcher and the required sub-assemblies drawings & detail

parts drawings was developed. ST for each sub-assembly and final assembly were prepared consisting of material details of all the

parts All detail parts & sub-assemblies were manufactured with requisite materials in-house at M/s HAL-TAD, Kanpur and thereafter

prototype Double stretcher assembly was manufactured. The Double stretcher assembly was tested as per Test schedule no.

TS/HS748-1 06 approved by RCMA Kanpur, found satisfactory in all respects Stress analysis carried out on UG model of double

stretcher assembly & its mounting assembly as per the test schedule requirements. Then, Assembly was approved by RCMA Kanpur

for use on HAL manufactured Dornier Do-228 aircraft.




(19) INDIA


(54) Title of the invention : STRUCTURAL PROVISIONING FOR ADJUSTABLE MOUNTING OF STANDALONE DISPLAY

UNIT OVER THE OPERATOR CONSOLE

(51) International classification :A63F13/212





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA








1)TIWARI GANGADHAR

2)KUMAR JAINENDRA

(57) Abstract :

Structural provisioning has been made for adjustable mounting of standalone Display unit over the operator console. The structure

provide rigid and movable mounting for required inclination of Display unit over the console. The structure facilitate for easy and

quick adjustment of Display unit with respect to the operator height by the operator itself on the ground as well as during the flight of

the aircraft. The invention can. be divided mainly into two parts; one the fixed part and another movable part. The fixed portion is

rigidly fixed over the console using stiff nut fasten systems, whil movable part is attached to the console using hinge as an

intermediate structure .. The monitor panel is shaped into rectangular plate with cutout, adapted to· install the Display· system

receiving surface, using plurality of fastening system.




(19) INDIA


(54) Title of the invention : FUEL SYSTEM TO REDUCE FUEL TEMPERATURE RISE AT THE INLET OF A PISTON ENGINE

OF LOW WING BASIC TRAINER AIRCRAFT

(51) International classification :F02M53/02





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA



AIRCRAFT DIVISION Address of Applicant :HINDUSTAN AERONAUTICS

LIMITED, TRANSPORT AIRCRAFT DIVISION, CHAKERI

POST OFFICE, HARJINDER, NAGAR KANPUR, U.P.-208008,

INDIA Uttar Pradesh India


1)MATEEN AHMAD

2)YOGENDRA SINGH

(57) Abstract :

In a basic trainer aircraft which operates under hot weather condition the chances of fuel vapour formation in the fuel system is high

which can lead to unintended stoppage of engine in mid-air during prolonged low throttle position. .In order to eliminate the chances

of vapour lock, the fuel system is modified to cater the fuel return line which keeps the fuel at a relatively lower temperature at the

entry of Fuel injector. The fuel return line reduces the chances of churning of fuel at the entry of Fuel injector.




(19) INDIA


(54) Title of the invention : TRAFFIC PATTERN/PHILOSOPHY FOR ON-BOARD SURFACE NAVIGATION SYSTEM






Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA








1)SUDHIR KUMAR

(57) Abstract :

Traffic pattern/philosophy has been made using MATLAB software. The runway is created for demonstration by taking latitude and

longitude information of two points. Various shapes of traffic around the runway shown by defining a various traffic at different

position by assigning latitude /longitudinal data. Movement of traffic has been shown defining a path along a vector. Message has

been displayed in the message box (can be used for cockpit display) by using standard conventions used for aviation and typed as

aircraft performs the routine operation. Various message may be shown by providing time delays. In actual implementation, traffic

information/clearance will be provided by Surface monitoring Radar (SMR) for non-cooperative target , by ADS-B for cooperative

targets and various clearance can be provided by ATC through data link.




(19) INDIA


(54) Title of the invention : DESIGN & DEVELOPMENT OF HOT CUP HOLDER ASSEMBLY FOR AIRCRAFT APPLICATION

(51) International classification :A47G





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA








1)PANIKER SANJEEV MADHAV

2)JAIN ARUN KUMAR

3)TIWARI SUDHIR KUMAR

(57) Abstract :

Do-228 aircraft is fitted with Galley Assembly. Galley Assembly having Hot Cup Holder Assembly which is used for holding Hot

Cup. For aircraft application as per guidelines from Airworthiness agencies the item installed need to be secured and sustain the loads

specified in airworthiness regulations. Therefore, secured locking of hot cup is required at LOCK condition (when lock is engaged for

secure locking of hot cup) & at UNLOCK condition (when lock is disengaged to move hot cup). To achieve the desired application,

Design, development & Installation of Hot Cup Holder Assembly is required. The Lock assembly helps in locking the hot cup which

does not having in built locking provision and with no means to attach to aircraft structure as per requirement to sustain loads. Hot

Cup Holder Assembly can be used for installation of similar unit on other aircraft & Application also.




(19) INDIA


(54) Title of the invention : STRUCTURAL RACK WITH CONSOLE FOR MOUNTING OF EQUIPMENT IN THE CABIN OF

THE AIRCRAFT.

(51) International classification :A47G





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA








1)SANJEEV MADHAV PANIKER

2)JAINENDRA KUMAR

3)ARUN KUMAR JAIN

(57) Abstract :

The object of this invention to provide an accurate and improved rigid mounting for heavy weight equipment in the cabin of the

aircraft with an arrangement for easy holding and sliding of equipment into the Rack. Still another object of the invention is to provide

a mounting for Console that can be integrated to Rack through attachment brackets. Yet another object of the invention is to avoid any

distortion in the Rack, which is observed in welding process and to provide dimensional accuracy of mounting locations. More

particularly, the invention relates to a mounting of various equipment of standard mounting size in the aircraft cabin for applications

such as search and rescue operations, sea ice mapping, collecting statistics on ship traffic or activities in environmentally sensitive

areas along the coastline etc. The invention comprises primarily two portion; first Rack and another Console. Rack is used to

accommodate various equipment at various level of the Rack while Console is used to accommodate Display, instruments and work

table for human interface equipment like keyboard, trackball etc.




(19) INDIA


(54) Title of the invention : THE INTELLIGENCE REFLEX (IR) TEST

(51) International classification :G09B19/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)piush Address of Applicant :Dhruv Surgicals Dr Choudhry Hospital

Khirni Bagh Shahjahanpur (U.P.) 242001 Uttar Pradesh India


1)piush

(57) Abstract :

The Intelligence Reflex (IR) test measure real time change in intelligence compared to intelligence quotient (IQ) based on changes in

cognitive ability with orienting reflexes




(19) INDIA


(54) Title of the invention : SYSTEM AND METHOD FOR DIGITAL VOTING THROUGH VOTER'S IDENTITIES






Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)MR. PRABHJYOT SINGH SODHI Address of Applicant :AMITY INTERNATIONAL SCHOOL,

SECTOR-44 NOIDA, UTTAR PRADESH-201303, INDIA Uttar

Pradesh India

2)MR. UTKARSH SAXENA

3)MS. VEENA MISHRA (72)Name of Inventor :

1)PRABHJYOT SINGH SODHI

2)UTKARSH SAXENA

3)VEENA MISHRA

(57) Abstract :

The mobile technology is ah ever evolving concept .Voting through mobile technology is also a new concept. In this paper we

proposed a mobile frameworkthrough which a user can vote using his/her mobile from any location. This E-voting technology is

secured and fast as compare to the traditional technologies that are currently existing in market. In this paper we have discussed

various security issues of EVM or Ballot paper voting with respect to security, accuracy and precision of results. The security issues

are seen in terms of possible attacks, system vulnerabilities and privacy concerns. We have also highlighted how the voting system can

be tailored to provide a more secure mobile voting environment. We have considered the futuristic architectural framework forE-

voting in our. discussion. The basic concepts and features of the E-voting technology are explained here. We have also analyzed five

pillars of strength for the E-voting security which would work in collaboration with each other to provide a secure mobile Voting

environment to the user.




(19) INDIA


(54) Title of the invention : DEVELOPING AN EFFECTIVE MOSQUITO REPELLANT USING HERBAL TECHNIQUES

(51) International classification :A01N65/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)MR. PRABHJYOT SINGH SODHI Address of Applicant :AMITY INTERNATIONAL SCHOOL,

SECTOR-44 NOIDA, UTTAR PRADESH-201303, INDIA Uttar

Pradesh India

2)MR. JAIDIVYA KUMAR LOHANI

3)MS. VEENA MISHRA (72)Name of Inventor :

1)PRABHJYOT SINGH SODHI

2)MR. JAIDIVYA KUMAR LOHANI

3)VEENA MISHRA

(57) Abstract :

This Present invention discloses an improved mosquito repellant mechanism that is unique, low-cost, and homemade and eco-friendly

to the nature that is developed by combining Lemon Peel extract oil, orange peel extract oil, Mint oil and camphor in a definite

proportion plus some other herbal nutrients are also involved so that it could be more effective mosquito repellant technique as well as

the effect of these products lasts longer. We mix all the necessary ingredients in a fixed proportion and make an oil earthen lamp

(Diya) which when lighten up repels mosquitos in the environment.




(19) INDIA


(54) Title of the invention : A HYBRID BRICK KILN AND ITS METHOD OF OPERATION

(51) International classification :F27D

1/08





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Punjab State Council for Science and Technology Address of Applicant :MGSIPA Complex, Institutional Area,

Sector 26, Chandigarh 160019 Chandigarh India


1)Pritpal Singh

2)Maganbir Singh

3)Ranjit Singh

4)Jatinder Kaur Arora

(57) Abstract :

The present Invention is in the field of Brick kiln. Particularly, the Invention provides a Hybrid Brick kiln adapted to selectively

operate and facilitate smooth switchover between natural draft or induced draft mode or vice-versa. The Invention also provides

method of operating the kiln.




(19) INDIA


(54) Title of the invention : A SYSTEM AND A METHOD FOR REAL TIME EXHAUST GAS RECIRCULATION (EGR) VALVE

CLEANING

(51) International classification :F02D41/22





Filing Date

:PCT//

:01/01/1900



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)MARUTI SUZUKI INDIA LIMITED Address of Applicant :1 Nelson Mandela Road, Vasant Kunj,

New Delhi-110070, India. Delhi India


1)RANJAN, SHASHI

2)VIDYARTHI, KUNAL

3)KHANDELWAL, VINEET

4)DWIVEDI, VIPIN

5)KHANNA, VIKRAM

(57) Abstract :

The subject matter disclosed herein relates to a system and a method for enabling real time Exhaust Gas Re-circulation (EGR) valve

cleaning to avoid deposition of soot particles inside the EGR valve. The present system (110) improves functional durability of EGR

valve by enabling EGR cleaning during vehicle driving operation. The present system (110) enables EGR valve cleaning to avoid soot

deposition. The present system (110) works during engine cut-off mode based on enabling engine operating conditions. During

cleaning cycle, EGR valve operates frequently in-between fully closed and fully open condition. The fully opened and fully closed

operations of the EGR valve happen multiple times to ensure cleaning of EGR valve. When EGR is in fully open condition, exhaust

gases flow through the EGR valve with higher flow rate and higher turbulence. To be published with Fig. 2




(19) INDIA


(54) Title of the invention : A PHOTO-VOLTAIC FED SINGLE INPUT DUAL OUTPUT DC/DC CONVERTER SYSTEM FOR

DRIVING LOAD

(51) International classification :H02J1/06





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)INDIAN INSTITUTE OF TECHNOLOGY DELHI Address of Applicant :Hauz Khas, New Delhi 110 016,

(India) Delhi India


1)SINGH, Bhim

2)MISHRA Kumar, Anjanee

(57) Abstract :

The present invention deals with a Photo-Voltaic (1) fed single input dual output DC/DC converter and deviation free maximum

power point tracking (MPPT) technique for solar based switched reluctance motor (SRM) (4) driven agriculture pump. The invented

DC/DC converter helps to reduce the inherent torque ripple and torque dip problem present in SRM drive (4) and it minimizes the

required size of split DC link capacitors of SRM converter. A deviation free MPPT algorithm is also proposed in present invention to

avoid the deviation problem present in conventional MPPT controllers (5) and hence it reduces the required size of PV panel. It also

helps to decrease the tracking time of operating point PV voltage. Therefore, the present invention provides a cost effective, efficient

and maintenance free PV fed SRM (4) driven agriculture pump system.




(19) INDIA


(54) Title of the invention : APPARATUS AND METHOD OF USE OF APPARATUS FOR LOCATING COMPONENTS OF A

SYSTEM

(51) International classification :F02F7/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)JAGUAR LAND ROVER LIMITED Address of Applicant :Abbey Road Whitley Coventry

Warwickshire CV3 4LF, United Kingdom U.K.


1)VAIDYA, Vinay Shriram

2)Rose, Nigel

3)AHMED, Sheraz

(57) Abstract :

A method of controlling movement of a first component of a vehicle, the first component forming part of a vehicle seating

arrangement, the method comprising: receiving a signal indicative of a state of a second component of the vehicle; and commencing

movement of the first component in dependence on the signal indicative of the state of the second component.




(19) INDIA


(54) Title of the invention : A SPRING LOADED PARCEL SHELF REAR CUSHION

(51) International classification :B60R21/06





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)MARUTI SUZUKI INDIA LIMITED Address of Applicant :1 Nelson Mandela Road, Vasant Kunj,

New Delhi-110070 , India Delhi India


1)ANKIT NIGAM

2)RAMAN GARG

3)KAPIL KR PANDEY

(57) Abstract :

The subject matter herein relates to a spring loaded parcel shelf rear cushion (200) adapted to provide cushioning to parcel shelf ,

adjust the compression of cushion as per the requirement through thread mechanism and avoid rattling noise. The spring loaded parcel

shelf rear cushion (200) has a socket (201) with internal threads and snap locks (10), a case (202) with external threads and a

protrusion fin (20), a shaft (203) with snap locks (30), a cover (204) and a spring (205). Said spring (105) is inserted in said shaft (203)

which is further inserted in said case (202) wherein said shaft (203) is snap fitted with said case (202) with the help said snap locks

(30). Said case (202) with said spring (205) in said shaft (203) is further inserted in said cover (204) and said socket (201) is tightened

around said case (202) to provide said spring loaded parcel tray rear cushion (200). Fig. 5




(19) INDIA


(54) Title of the invention : FOLD-DOWN VEHICLE SEAT AND VEHICLE EQUIPPED WITH SUCH A SEAT

(51) International classification :A47C1/022





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)RENAULT s.a.s. Address of Applicant :13/15 Quai Le Gallo, F-92100

BOULOGNE-BILLANCOURT, France France


1)CHAKARAVARTHI, Nirmal

(57) Abstract :

Motor-vehicle seat (1) comprising a seat surface (2) and a seat back (3)that can be folded down against the seat surface so as to form a

substantially planar surface, the seat surface (2) and the back (3) being equipped with a seat-surface structure (20) and a back structure

(30), the seat-surface structure (20) comprising gaps (21) and the back structure (30) being at least partly nested inside the gaps (21) of

the seat-surface structure (20) when the back is in the folded-down position against the seat surface.




(19) INDIA


(54) Title of the invention : A PROCESS OF MAKING COMPREG MULTI COLORED LAMINATED WOOD AND UTILITY,

ORNAMENTAL, DECORATIVE PRODUCTS THEREOF

(51) International classification :B44C3/12





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Knitpro International Address of Applicant :Plot No. 28 & 29, Noida Special

Economic Zone, Noida, 201305, (India). Uttar Pradesh India


1)A.K. Rastogi

(57) Abstract :

A PROCESS OF MAKING COMPREG MULTI COLORED LAMINATED WOOD AND UTILITY, ORNAMENTAL,

DECORATIVE PRODUCTS THEREOF Abstract The invention is a process including the steps of manufacturing of compreg

laminated wood and transforming the wood thus obtained toornamental and utility products, including steps of quality checking,

veneer selection, Impregnation of veneer with solution of dye and thermosetting resin, drying in kiln, glue spreadingfollowed by

bunching, followed by cooling resulting in creation of slab, followed by trimming & cutting of slabs into strips of small sizes, shaping

drawing on the sheet as per the profile required, shaping and profiling by CNC Router Machines, grinding and shaping by expert

craftsman to bring out the color patterns, end rounding for smooth edges, grinding using various grits of emery wheels for surface

finish, polishing / buffing for mirror like surface finish.




(19) INDIA


(54) Title of the invention : CAPILLARY ELECTROPHORESIS MICROCHIP FOR BEER AND WINE QUALITY TESTING

(51) International classification :G01N27/447





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)INDIAN INSTITUTE OF TECHNOLOGY DELHI Address of Applicant :Hauz Khas New Delhi India 110016

Delhi India

2)SECRETARY, DEPARTMENT OF BIOTECHNOLOGY (72)Name of Inventor :

1)JHA, Sandeep, Kumar

2)ROYCHOUDHURY, Appan

(57) Abstract :

An improved capillary electrophoresis microchip device with pulsed amperometric detection technique for the analysis of quality

parameters of wine and beer sample via separation and simultaneous detection of most potential polyphenol compounds responsible

for flavour and aroma. The device comprises a T-shaped separation microchannel (112) having an offset, wherein the microfluids flow

hydrodynamically after injection in the offset of the microchannel by a peristaltic pump. There is a separation channel comprising a

plurality of microelectrodes (102) to separate charged molecules of microfluids on application of an electric field when in operation.

The device has a sample reservoir (104) and a sample waste reservoir (106) coupled to the microchannel (112) and a buffer reservoir

(108) containing a conductive element comprising carbon paste and a buffer waste reservoir (110) coupled to the microelectrodes

(102) for performing electrochemical reaction, wherein the separation microchannel (112) is coupled to the reservoirs (108,110).




(19) INDIA


(54) Title of the invention : A METHOD OF MAKING FEATHER WOOL AND FERTILIZER BY RECYCLIING FROM

CHICKEN BUTCHERY WASTE•

(51) International classification :C05F17/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)RADHESH AGRAHARI Address of Applicant :89 DEVI GANJ FATEHPUR UTTAR

PRADHEH INDIA 212601 Uttar Pradesh India

2)MUDITA SRIVASTAVA (72)Name of Inventor :

1)RADHESH AGRAHARI

2)MUDITA SRIVASTAVA

(57) Abstract :

The present invention relates to a process for converting chicken butchery waste into useful products using a combination of natural

products and less chemicals used. The process comprises of cleaning, sanitization, and washing, treatment, pulling out, making wool

pulp, hand pinning and hand weaving. The process is natural and cost effective, reduces the risk to the water pollution, air pollution

and health hazard problems. The wool produced from the said process is useful in fabrics and textile products. Non-feather part is used

for biochemical, pharmaceutical, cosmetic, animal feed, and fertilizer product.




(19) INDIA


(54) Title of the invention : A SYSTEM AND A METHOD FOR FILTRATION OF A HYDRAULIC FLUID IN A HYDRAULIC

SYSTEM

(51) International classification :E02F9/22





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)MANITOU EQUIPMENT INDIA PVT. LTD. Address of Applicant :Plot No. 22, Udyog Vihar, Greater

Noida, P.O. Surajpur, Gautam Budh Nagar, U.P.-201306, India

Uttar Pradesh India

2)VIJAY SHARMA

3)SANDEEP AGGARWAL

4)RAJESH BHADAURIA (72)Name of Inventor :

1)VIJAY SHARMA

2)SANDEEP AGGARWAL

3)RAJESH BHADAURIA

(57) Abstract :

A system (100) for filtration of a hydraulic fluid in a hydraulic system (1000), the hydraulic system (1000) is having a reservoir

(1100).The system (100) comprises ducting (110) passing through the reservoir (1100), a pressure enhancing device (120) installed

along the ducting (110), one or more filters (130) installed along the ducting (110). Further, the ducting (110) is configured to collect

the hydraulic fluid from the reservoir (1100). Further, the pressure enhancing device (120) is configured to circulate the hydraulic

fluid inside of the ducting (110). Further, the one or more filters (130) are configured to filter the hydraulic fluid during the circulation

of the hydraulic fluid inside the ducting (110).




(19) INDIA


(54) Title of the invention : MOTORIZED REUSABLE TITANIUM SURGICAL TOOL FOR POSITIONING STABILIZING AND

EXPOSING OF HEART

(51) International classification :A61B18/14





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Surgitech Healthcare Private Limited Address of Applicant :9/102, Geeta Colony, Delhi-110031,

New Delhi, India Delhi India


1)Anuj Kumar

2)Surender Kumar Sharma

3)Ajay Kaul

(57) Abstract :

The invention discloses a device for exposing, positioning and stabilizing of a tissue during surgery. The said device is a transition

metal material which is autoclavable, strong and corrosion free with high specific strength. The said device is also operatable by a

motor to avoid human subjectivity of manual use and to improve the ergonomics during its use and can withstand sustained tension

application through its tension creating means to minimize vibration of the tissue / heart during exposing, positioning and stabilizing

functions so that essential cardiac parameters are not at risk during such coronary artery surgery.




(19) INDIA


(54) Title of the invention : UNIVERSAL TRANSMISSION PROTOCOL (UTP) FORHANDLING OFFLINE DATA

COMMUNICATION

(51) International classification :G06F11/27





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)HIKE PRIVATE LIMITED Address of Applicant :World Mark 1, 4th Floor, Tower A

Asset Area No. 11, Hospitality District, Indira Gandhi

International Airport, New Delhi Delhi India Delhi India

2)MotivePrime Consumer Electronics Private Limited (72)Name of Inventor :

1)Sai Srinivas Kiran Garimella

2)Shubham Malhotra

3)KAVIN BHARTI MITTAL

(57) Abstract :

A system and method for UTP based communication has been described. A plurality of application data segments of an application

using USSD session. The plurality of application data segments is converted from a text format to original application data format to

obtain the application data. The application data is displayed at a user interface of an application requesting the application data. FIG 4




(19) INDIA


(54) Title of the invention : AN AIR CHANNELIZATION SYSTEM WITH VISCO-ELASTIC MATERIAL TO MANAGE

TEMPERATURE RISE IN MOTOR OF A GRINDING AND MIXING APPLIANCE ALONG WITH NOISE AND VIBRATION

REDUCTION

(51) International classification :H04W4/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Havells India Limited Address of Applicant :904, 9th Floor, Surya Kiran Building,

KG Marg, Connaught Place, New Delhi-110001. Delhi India


1)DIWAN SINGH KHOLIA

2)VISHESH KUMAR

3)PALLAB BHATTACHARYA

4)AMIT KUMAR SRIVASTAVA

5)KUMAR RISHABH

6)VISWANATHAN SUBRAMANIAN

(57) Abstract :

AN AIR CHANNELIZATION SYSTEM WITH VISCO-ELASTIC MATERIAL TO MANAGE TEMPERATURE RISE IN MOTOR

OF A GRINDING AND MIXING APPLIANCE ALONG WITH NOISE AND VIBRATION REDUCTION The present invention

provides an air channelization system (10) along with visco-elastic material (11) to manage temperature rise in motor (13) and other

regions of high temperature as well as noise and vibration reduction in mixing grinding appliance. In the present invention, air

channelization system (10) has a duct (12) with an air guiding structure (15) that encompasses the motor (13) and fan (14) assembly

into a close volume to force the air to flow efficiently over the motor (13) leading to lower temperatures o

official journal of the patent office...the patent office journal no. 15/2019 dated 12/04/2019 16255...

Documents