official journal of the patent...
TRANSCRIPT
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 32989
पेटेंट कार्ाालर्
शासकीर् जर्ाल
OFFICIAL JOURNAL
OF
THE PATENT OFFICE
नर्र्ामर् सं. 34/2020 शकु्रवार दिर्ाकं: 21/08/2020
ISSUE NO. 34/2020 FRIDAY DATE: 21/08/2020
पटेेंट कार्ाालर् का एक प्रकाशर् PUBLICATION OF THE PATENT OFFICE
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 32990
INTRODUCTION
In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005
effective from 01st January 2005, the Official Journal of The Patent Office is required to be published under
the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings
on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on
this Official Journal and other information as required by the public should be addressed to the Controller
General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that
the content can be enriched.
( Om Prakash Gupta ) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS
21st AUGUST, 2020
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 32991
CONTENTS
SUBJECT PAGE NUMBER
JURISDICTION : 32992 – 32993
SPECIAL NOTICE : 32994 – 32995
CORRIGENDUM FOR CORRECTION IN PATENT OFFICE
JOURNAL(CHENNAI) : 32996
CORRIGENDUM U/S 57 OF THE PATENT ACT(KOLKATA) : 32997
EARLY PUBLICATION (DELHI) : 32998 – 33021
EARLY PUBLICATION (MUMBAI) : 33022 – 33049
EARLY PUBLICATION (CHENNAI) : 33050 – 33187
PUBLICATION AFTER 18 MONTHS (DELHI) : 33188 – 34017
PUBLICATION AFTER 18 MONTHS (MUMBAI) : 34018 – 34094
PUBLICATION AFTER 18 MONTHS (CHENNAI) : 34095 – 34256
PUBLICATION AFTER 18 MONTHS (KOLKATA) : 34257 – 34338
WEEKLY ISSUED FER (DELHI) : 34339 – 34372
WEEKLY ISSUED FER (MUMBAI) : 34373 – 34392
WEEKLY ISSUED FER (CHENNAI) : 34393 – 34423
WEEKLY ISSUED FER (KOLKATA) : 34424 – 34431
APPLICATION(S) FOR RESTORATION OF LAPSED PATENT(S)
[PUBLICATION U/S 61(1) RULE 84(3) READ WITH RULE
85](DELHI) : 34432
PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE
GRANT ( DELHI ) 34433 – 34444
PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE
GRANT (MUMBAI) : 34445 – 34450
PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE
GRANT (CHENNAI : 34451 – 34461
PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE
GRANT (KOLKATA) : 34462 – 34465
INTRODUCTION TO DESIGN PUBLICATION : 34466
REGISTRATION OF DESIGNS : 34467 - 34517
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 32992
THE PATENT OFFICE
KOLKATA, 21/08/2020
Address of the Patent Offices/Jurisdictions
The following are addresses of all the Patent Offices located at different places having their Territorial
Jurisdiction on a Zonal basis as shown below:- 1 Office of the Controller General of Patents,
Designs & Trade Marks, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill, Mumbai – 400 037
Phone: (91)(22) 24123311, Fax : (91)(22) 24123322 E-mail: [email protected]
4 The Patent Office, Government of India, Intellectual Property Rights Building, G.S.T. Road, Guindy, Chennai – 600 032. Phone: (91)(44) 2250 2081-84 Fax : (91)(44) 2250 2066 E-mail: [email protected]
The States of Andhra Pradesh, Telangana, Karnataka, Kerala, Tamil Nadu and the Union Territories of Puducherry and Lakshadweep.
2 The Patent Office, Government of India, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill,
Mumbai – 400 037 Phone: (91)(22) 24137701 Fax: (91)(22) 24130387
E-mail: [email protected] The States of Gujarat, Maharashtra, Madhya
Pradesh, Goa and Chhattisgarh and the Union Territories of Daman and Diu & Dadra and Nagar Haveli
5
The Patent Office (Head Office), Government of India, Boudhik Sampada Bhavan, CP-2, Sector –V, Salt Lake City, Kolkata- 700 091 Phone: (91)(33) 2367 1943/44/45/46/87 Fax: (91)(33) 2367 1988 E-Mail: [email protected]
Rest of India 3
The Patent Office, Government of India, Boudhik Sampada Bhavan, Plot No. 32., Sector-14, Dwarka, New Delhi – 110075 Phone: (91)(11) 25300200 & 28032253 Fax: (91)(11) 28034301 & 28034302 E.mail: [email protected]
The States of Haryana, Himachal Pradesh, Jammu and Kashmir, Punjab, Rajasthan, Uttar Pradesh, Uttaranchal, Delhi and the Union Territory of Chandigarh.
Website: www.ipindia.nic.in www.patentoffice.nic.in All applications, notices, statements or other documents or any fees required by the Patents Act, 1970
and The Patents (Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received
only at the appropriate offices of the Patent Office. Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of
Patents drawn on a scheduled Bank at the place where the appropriate office is situated.
mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]://www.ipindia.nic.in/
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 32993
पेटेंट कार्ाालर्
कोलकाता, दिर्ाकं 21/08/2020
•कार्ाालर्ों के क्षते्रानिकार के पत े
नवनिन्न जर्हों पर नथित पेटेंट कार्ाालर् के पते आचंनलक आिार पर िर्शात उर्के प्रािनेशक अनिकार क्षते्र के
साि र्ीच ेदिए र्ए है:-
1 कार्ाालर् : महानर्र्तं्रक, एकथव, अनिकल्प
तिा व्यापार नचहर्,
एंटोप नहल डाकघर के समीप,
एस. एम. रोड, एंटोप नहल, ममु्बई- 400 037, िारत,
फोर्: (91) (22) 24123311
फ़ैक्स: (91) (22) 24123322
ई. मेल: [email protected]
4 पटेेंट कार्ाालर्, िारत सरकार
इंटेलेक्चअुल प्रॉपटी राइट्स नबलल्डंर्, इंडनथिर्ल इथटेट
एसआईडीसीओ आरएमडी र्ोडाउर् एररर्ा
एडजसने्ट टु ईर्ल फ्लाथक, जी. एस. टी. रोड,
र्ार्न्डी
चने्नई - 600 032.
फोर्: (91)(44) 2250 2081-84
फ़ैक्स: (91)(44) 2250-2066
ई. मेल: [email protected]
आन्र प्रिेश, तलेंर्ार्ा, कर्ााटक, केरल, तनमलर्ाडु
तिा पडुुचरेी राज्र् क्षते्र एवं सघं शानसत क्षते्र,
लक्षिीप
2 पटेेंट कार्ाालर्, िारत सरकार
बौनिक सपंिा िवर्,
एंटोप नहल डाकघर के समीप,
एस. एम. रोड, एंटोप नहल, ममु्बई- 400 037,
फोर्: (91) (22) 24137701
फ़ैक्स: (91) (22) 24130387
ई. मेल: [email protected]
•र्जुरात, महाराष्ट्र, मध्र् प्रिेश, र्ोवा तिा छत्तीसर्ढ़ राज्र् क्षते्र एव ंसघं शानसत क्षते्र, िमर् तिा िीव, िािर और र्र्र हवलेी.
5 पटेेंट कार्ाालर्, िारत सरकार कोलकाता, (प्रिार् कार्ाालर्)
बौनिक सपंिा िवर्,
सीपी-2, सेक्टर- V, साल्ट लेक नसटी,
कोलकाता-700 091, िारत.
फोर्: (91)(33) 2367 1943/44/45/46/87
फ़ैक्स:/Fax: (91)(33) 2367 1988
ई. मेल: [email protected]
िारत का अवशेष क्षते्र
3 पटेेंट कार्ाालर्, िारत सरकार
बौनिक सपंिा िवर्,
प्लॉट स.ं 32, सके्टर- 14, द्वारका, र्ई दिल्ली- 110 075.
फोर्: (91)(11) 25300200, 28032253
फ़ैक्स: (91)(11) 28034301, 28034302
ई. मेल: [email protected]
हररर्ाणा, नहमाचल प्रिेश, जम्मू तिा कश्मीर, पजंाब,राजथिार्,
उत्तर प्रिेश, दिल्ली तिा उत्तराचंल राज्र् क्षते्रों, एवं सघं शानसत
क्षते्र चडंीर्ढ़
वेबसाइट: http://www.ipindia.nic.in www.patentoffice.nic.in
पटेेंट अनिनर्र्म, 1970 तिा पटेेंट (सशंोिर्) अनिनर्र्म, 2005 अिवा पटेेंट (सशंोिर्) नर्र्म, 2006 द्वारा वानंछत सिी
आवेिर्, सूचर्ाए, नववरण र्ा अन्र् िथतावेज़ र्ा कोई शलु्क पटेेंट कार्ाालर् के केवल उपर्कु्त कार्ाालर् में थवीकृत होंर्े।
शलु्क: शलु्क र्ा तो र्र्ि रूप में र्ा Controller of Patents के र्ाम में िेर् बैंक ड्राफ्ट र्ा चके के द्वारा िजेी जा सकती ह ैजो उसी
थिार् के दकसी अर्ुसनूचत बैंक में प्रित्त हो जहााँ उपर्कु्त कार्ाालर् नथित ह ै।
mailto:[email protected]:[email protected]:[email protected]://www.ipindia.nic.in/
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 32994
SPECIAL NOTICE
18 Months publication as required under Section 11A of the Patents Act, 1970
as amended by the Patents (Amendment) Act, 2005.
Notice is hereby given that any person at any time before the grant of Patent may give representation by way of
opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under
section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules,
2006.
Notice is also given that if any interested person requests for copies of the complete specification, drawing and
abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as
per the jurisdiction on payment of prescribed fees of Rs.8/- per page. If any further details are required to be
obtained, the same can be provided by the respective Patent Offices on request.
(Om Prakash Gupta) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 32995
SPECIAL NOTICE
Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005
and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III,
Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published
containing all the activities of The Patent Office such as publication of all the patent applications after 18th
months , grant of patents & all other information in respect of the proceedings as required under the provisions
of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday.
The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are
discontinued from 01/01/2009.
SPECIAL NOTICE
Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.
However, if duplication of publication of any application is found, then earlier date of publication will be taken
for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months
from the date of second publication, provided that there is there is no third party representation.
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 32996
CORRIGENDUM FOR CORRECTION IN
PATENT OFFICE JOURNAL(CHENNAI)
APPLICATION NO. 202041028086 published in Patent Office Journal no.28/2020 dated 10/07/2020, the order of applicants and
inventors should read as follows:
NAME OF APPLICANT:
1. Mr. S. M. Vikaash Kumar.
ADDRESS OF APPLICANT: S/o Dr.N.C.Selvakumar, 17-B, Sarakkalvilai, Edalakudy, Kanyakumari, Tamil Nadu,
India – 629002.
2. Mr. M. Suresh.
3. Dr. V. Priya
4. Dr. P. L. N. Ramesh.
5. Dr. K. Sathiyasekar.
6. Mrs. M. Preetha.
7. Mrs. S. Shobana
8. Dr. S. Thangalakshmi.
9. Dr.P.Manojkumar.
10. Dr. Hitesh Panchal.
11. Mr. K. Anand.
12. Dr. R. Umamaheswari.
13. Dr. R. C. Karpagalakshmi.
14. Mr. R. Rajarajan.
15. Mrs. S. Suganya.
16. Dr. R. Jeyabharath.
17. Dr. P. Veena.
18. Mr. C. Srinivasan.
NAME OF INVENTOR:
1. Mr. S. M. Vikaash Kumar.
2. Mr. M. Suresh.
3. Dr. V. Priya.
4. Dr. P. L. N. Ramesh.
5. Dr. K. Sathiyasekar.
6. Mrs. M. Preetha.
7. Mrs. S. Shobana.
8. Dr. S. Thangalakshmi.
9. Dr.P.Manojkumar.
10. Dr. Hitesh Panchal.
11. Mr. K. Anand.
12. Dr. R. Umamaheswari.
13. Dr. R. C. Karpagalakshmi.
14. Mr. R. Rajarajan.
15. Mrs. S. Suganya.
16. Dr. R. Jeyabharath.
17. Dr. P. Veena.
18. Mr. C. Srinivasan.
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 32997
Corrigendum U/S 57 of the Patent Act(KOLKATA)
The contents in respect of Patent No.260304 (2132/KOLNP/2007) for change in name and address of patentee
published in official journal No.31/2019 dated 02.08.2019 may be treated as not published. It was erroneously
published in the said journal.
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 32998
Early Publication: The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule
24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of
Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents
(Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006:
(12) PATENT APPLICATION PUBLICATION (21) Application No.201911033304 A
(19) INDIA
(22) Date of filing of Application :19/08/2019 (43) Publication Date : 21/08/2020
(54) Title of the invention : SEMI-AUTOMATIC WATER PUMP CONTROLLER
(51) International classification :F22D
11/02
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)JXR TECHNOLOGIES PVT. LTD Address of Applicant :3724/1, TRI NAGAR, DELHI-110035,
INDIA Delhi India
(72)Name of Inventor :
1)RAVI VARDHAN ARYA
(57) Abstract :
This present invention discloses the semi-automatic water pump controller. The proposed invention comprises of LED, push button, tri
state switch, relays, control circuitry, AC to DC convertor,signal wire, power wire and pump wire. To switch ON the water pump, user
have to press the push button.The purpose of the invention is to automatically switch OFF the water pump when water level in
overhead tank reaches the water detection means.
No. of Pages : 14 No. of Claims : 6
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 32999
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011024340 A
(19) INDIA
(22) Date of filing of Application :10/06/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : FOOT OPERATED WASHING STATION WITH ATTENDANCE AND TEMPERATURE
RECORDING (FOWS-ATR)
(51) International classification :B41J
29/14
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)GLA University, Mathura Address of Applicant :17km Stone, NH-2, Mathura-Delhi
Road P.O. Chaumuhan, Mathura-281406, (U.P.), India Uttar
Pradesh India
(72)Name of Inventor :
1)Dr. Vijay Kumar Dwivedi
2)Dr. Pooja Pathak
(57) Abstract :
The present invention provides a touch-free and foot operated sanitization system for a public and private organizations. A hand
cleansing and attendance monitoring system that electronically monitors and communicates the body temperature of an individual
through a computer based system. The system includes washing unit, a face recording unit and Laser thermometer unit. The washing
unit is further equipped with a water tank (1), a soap dispenser (2), at least two foot lever (1 & 2), at least two spring (1 & 2), at least
two foot pedal (1 & 2), a water tap (11), a Basin (12) and a waste water pipe (13). The presented system can be installed at the
gateway of organization or residential society or public places such as Bank, Post office, Malls, Bus stand, Railway station to ensure
the maximum sanitization and avoid spreading of any diseases infection among people.
No. of Pages : 10 No. of Claims : 4
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33000
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011025401 A
(19) INDIA
(22) Date of filing of Application :17/06/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : SMART CAR IGNITION SYSTEM
(51) International classification :F02B
53/12
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)NewGen IEDC, GLA University, Mathura Address of Applicant :17km Stone, NH-2, Mathura-Delhi
Road P.O. Chaumuhan, Mathura, Uttar Pradesh 281406 Uttar
Pradesh India
(72)Name of Inventor :
1)Mrs. Pooja Pathak
2)Dr. Vijay Kr. Dwivedi
3)Ms. Puja
4)Mr. Ritesh Kumar Dixit
(57) Abstract :
A smart car ignition system to be installed inside a car, comprises of a microcontroller (1), a seat belt switch (2), a load cell (3) and a
door switch (4), in which when all the seat belt switch (2), the load cell (3) and the door switch (4) linked with the microcontroller (1)
gets ON, the circuit of the car ignition system gets complete and then the engine (6) of the car ignites while in any other case, the
circuit will not get completed and car will not be start.
No. of Pages : 13 No. of Claims : 4
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33001
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011025402 A
(19) INDIA
(22) Date of filing of Application :17/06/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : FORCED SOLAR DRYER WITH PHASE CHANGING MATERIAL
(51) International classification :H01F
30/14
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)NewGen IEDC, GLA University, Mathura Address of Applicant :17km Stone, NH-2, Mathura-Delhi
Road P.O. Chaumuhan, Mathura, Uttar Pradesh 281406 Uttar
Pradesh India
(72)Name of Inventor :
1)Amitesh Kumar Pandey
2)Chandrakesh Singh
3)Ashu Verma
4)Dr. Sujit Kr Verma
(57) Abstract :
A forced solar dryer with phase changing material to dry the grains and prevent contamination and works without electricity,
comprises of a plurality of perforated trays (1), a flat plate solar collector on a toughened glass (2), an insulation wall (3) embedded
with a blower (4), an inlet (5) and an outlet (6) within a wooden chamber (8) in which the perforated tray is using a phase changing
material and when the solar radiations (7) falls on the toughened glass (2), the flat plate solar collector on a toughened glass (2) warms
the air in the wooden chamber (8) which is driven by a blower, then the warm air interact with the grains kept on the perforated trays
(1) for the heat transfer to dry the grains.
No. of Pages : 9 No. of Claims : 3
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33002
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011025403 A
(19) INDIA
(22) Date of filing of Application :17/06/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : SMART AUTOMATIC STREET LIGHT WITH WOMAN PROTECTION SYSTEM
(51) International classification :G08G
1/097
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)GLA University, Mathura Address of Applicant :17 km Stone, NH-2, Mathura-Delhi
Road P.O. Chaumuhan, Mathura, Uttar Pradesh 281406 Uttar
Pradesh India
(72)Name of Inventor :
1)Prakhar Maheshwari
2)Monika Agrawal
3)Dr. Vishal Goyal
4)Dr. Vinay Kumar Deolia
(57) Abstract :
The present invention provides an outdoor lighting system with reduced power consumption. The system includes at least one light
source, at least two microcontrollers, at least one camera unit with communication system, and a switch. The communication system
of the present invention is ESP32 webcam, PIR sensor, Tiva microcontroller, LDR sensor, GSM Module. The Street lights are
controlled automatically to minimize power consumption and reduce man work by Switching ON/OFF the street lights and in certain
toggling conditions as well as switching OFF of some lights concerning the motion observed on the roads.
No. of Pages : 10 No. of Claims : 7
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33003
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011025404 A
(19) INDIA
(22) Date of filing of Application :17/06/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : AUTOMATIC VOLUMETRIC WATER FILLING TAP
(51) International classification :E03B
3/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)GLA University, Mathura Address of Applicant :17km Stone, NH-2, Mathura-Delhi
Road P.O. Chaumuhan, Mathura, Uttar Pradesh 281406 Uttar
Pradesh India
(72)Name of Inventor :
1)Rohini Sharma
2)Prof. Diwakar Bhardwaj
3)Aditya Goswami
4)Dr. Vikas Kumar Sharma
(57) Abstract :
The present invention provides a touch free automatic tap system to reduce the wastage of water in various places. The touch free
automatic tap system comprises infrared sensor having a infrared transmitter (2) and infrared receiver (3), an ultra violet sensor (4)
and a micro-controller (5). The presence of an object (7) is detected by the infrared sensor and the distance of the object is detected by
ultraviolet sensor and transmitted to the micro-controller for to start, continue and stop water discharge from the tap (6).
No. of Pages : 13 No. of Claims : 4
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33004
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011025405 A
(19) INDIA
(22) Date of filing of Application :17/06/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : QUADRUPED SPIDER ROBOT WITH RADAR SYSTEM ENABLED
(51) International classification :G01S
13/66
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)GLA University, Mathura Address of Applicant :17km Stone, NH-2, Mathura-Delhi
Road P.O. Chaumuhan, Mathura-281406, (U.P.), India Uttar
Pradesh India
(72)Name of Inventor :
1)Mr. Rishabh Johari
2)Mr. Saurabh Kumar
3)Dr. Aasheesh Shukla
4)Dr. Manish Kumar
5)Dr. Atul Bansal
6)Dr. Vinay Kumar Deolia
(57) Abstract :
A quadruped spider robot with radar system enabled comprises of twelve servos (01 to 12) installed over chassis of the quadruped
spider robot for the axis moment of the robot; four legs comprises of tibea (13, 18, 19, 24), femur (14, 17, 20, 23) and coxa (15, 16,
21, 22); an upper body (25); a lower body (26), a microcontroller (28) a battery (29), and an ultrasonic sensor to locate the distance
and angle of the obstacle, used to identify landmines and to identify the people stuck in debris through nuclear quadrupole resonance
and neutron probes based ground penetrating radar technology.
No. of Pages : 13 No. of Claims : 4
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33005
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011025487 A
(19) INDIA
(22) Date of filing of Application :17/06/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : SYNCHROMESH CLUTCH BOX
(51) International classification :F16D
13/64
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)GLA University, Mathura Address of Applicant :17km Stone, NH-2, Mathura-Delhi
Road P.O. Chaumuhan, Mathura, Uttar Pradesh 281406 Uttar
Pradesh India
(72)Name of Inventor :
1)Utkarsh Goyal
2)Kamal Sharma
3)Ritesh Dixit
(57) Abstract :
A synchromesh clutch box that works on a synchro meshing arrangement and functions as a clutch and as a synchromesh gear box
separately as per requirement of the user, comprising of a sleeve (5), two hubs (2, 6), two shafts (1, 7) one of them is hollow and other
one is solid, a synchronizer ring (3) and a blocker ring (4).
No. of Pages : 10 No. of Claims : 5
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33006
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011025806 A
(19) INDIA
(22) Date of filing of Application :18/06/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : STAND ALONE CONTACTLESS THERMAL SCREENING ACCESS CONTROL SYSTEM WITH
SANITIZATION CHAMBER HAVING NEGATIVE IONS/UV EXPOSURE /HERBAL STEAM PROCESS
(51) International classification :G07C
9/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Ms. Sakshi Misra Address of Applicant :B-1/7 Vinay Khand, Gomti Nagar,
Lucknow, Uttar Pradesh 226010 Uttar Pradesh India
2)Prof. (Dr.) Mukul Misra
3)Prof. (Dr.) S. Devaneyan (72)Name of Inventor :
1)Ms. Sakshi Misra
2)Prof. (Dr.) Mukul Misra
3)Prof. (Dr.) S. Devaneyan
(57) Abstract :
The integration of indigenously produced body temperature detection and sanitization mechanism to create a non-contact wholesome
device for access control with sanitization. This innovation is relevant in the present times and will be useful in the future as
organizations and public has become more aware of their health and hygiene
No. of Pages : 7 No. of Claims : 3
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33007
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011026452 A
(19) INDIA
(22) Date of filing of Application :23/06/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : LOW LUBRICATING OIL CUTOFF IGNITION SYSTEM
(51) International classification :E21B
43/1185
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)GLA University, Mathura Address of Applicant :17km Stone, NH-2, Mathura-Delhi
Road P.O. Chaumuhan, Mathura-281406, (U.P.), India Uttar
Pradesh India
(72)Name of Inventor :
1)Harish Kumar Sharma
2)Nitin Kukreja
3)Kamal Sharma
(57) Abstract :
The present invention provides a low level lubricant detection system for lubricant reservoir of the automobiles. The low level
lubricant detection system includes a micro controller (1), a relay system (2), a ECM (electro control machine) (3) with connecting
means (4), a Pressure switch sensor (5), a switch (6). The indication of the low lubricant is directing to the system to cut off the
ignition system of the engine with the help of relay (2) and microcontroller (1). Relay and microcontroller form a circuit, so that if the
lubricant is below than required level then the engine will not start.
No. of Pages : 8 No. of Claims : 3
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33008
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011027523 A
(19) INDIA
(22) Date of filing of Application :29/06/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : AN ADVANCED ELECTROMECHANICAL AUTOMATED SEED PLANTING MACHINE FOR
AGRICULTURAL REVOLUTIONS
(51) International classification :G04C
13/10
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Prakash Panwar Address of Applicant :Panwaro ka Bass, Bader Chowk,
Village: Atbara, Teh: Sojat City, Dist: Pali, Rajasthan India
(306104) Rajasthan India
2)Prabhu Singh
3)Sagar Ramlani
4)Dr Deepak Bhatia
5)Shrinit Goyal (72)Name of Inventor :
1)Dr Deepak Bhatia
2)Prabhu Singh
3)Prakash Panwar
4)Shrinit Goyal
5)Sagar Ramlani
(57) Abstract :
This invention provides seed for the planting machine and proposed mechanism is attachable and detachable to the tractor. The seed
planting machine takes power from the battery of the tractor or wheel connected with the cultivator. This power is transmitted through
the single DC wire. In the case of electric drive, the power is generated through the DC motor. The power from the DC motor is
transmitted to the pulley and the power transmitted from pulley to another pulley, which is connected to the solid shaft through the
belt-pulley drive system. In addition to the seed planting machine, it also contains a blockage finder at the end of the pipe near the
land. This pipe helps to provide a path to seeds for dropping at the perfect time. And the end of this pipe is near to the land. Due to wet
soil or some other reasons, if the pipe is blocked then the sensor or detector circuit connected with the pipe (generally at the end of
pipe for reducing the error in the system) will detect the blockage.
No. of Pages : 15 No. of Claims : 9
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33009
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011028427 A
(19) INDIA
(22) Date of filing of Application :03/07/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : WEARABLE APPARATUS FOR DETERMINING GONIOMETRIC READINGS OF A BODY
PORTION OF A SUBJECT
(51) International classification :A61B
5/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Rashi Aditi Ranjan Address of Applicant :University Institute of Engineering and
Technology, Panjab University, Sector - 25, Chandigarh - 160014
Chandigarh India
2)Varun Karan
3)Poojita Garg
4)Sahil Sharma
5)Dr. Prashant Jindal
6)Dr. Mamta Juneja (72)Name of Inventor :
1)Rashi Aditi Ranjan
2)Varun Karan
3)Poojita Garg
4)Sahil Sharma
5)Dr. Prashant Jindal
6)Dr. Mamta Juneja
(57) Abstract :
A wearable apparatus (100) for determining goniometric readings of a body portion of a subject is provided. The wearable apparatus
(100) includes a first layer (102) encapsulating the body portion of a subject, wherein the first layer (102) includes a proximal end, a
distal end, a dorsal side and a palmar side, wherein the proximal end is towards a wrist of the subject, the distal end is towards a
plurality of fingers of the subject, the dorsal side includes a top portion of the hand of the subject, and the palmar side includes a
grasping area of the hand of the subject; a first flexion sensor (106)is disposed on a dorsal side of a first branch encapsulating an index
finger, a second flexion sensor (108) is disposed on a dorsal side of a second branch encapsulating a middle finger, a third flexion
sensor (110) is disposed on a dorsal side of a third branch encapsulating a ring finger¸ a fourth flexion sensor (112) is disposed on a
dorsal side of a fourth branch encapsulating a pinky/little finger and a fifth flexion sensor (114) is disposed on a dorsal side of a fifth
branch encapsulating the thumb; a force sensing resistor (116) disposed at the proximal end of the palmar side of the body portion of
the subject, wherein the force sensing resistor (116) covers at least a portion of gripping area of a hand of the subject to measure an
amount of force applied by the subject on a gripping object (118) including a flat surface area and an ergonomic surface area.
No. of Pages : 30 No. of Claims : 10
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33010
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011028554 A
(19) INDIA
(22) Date of filing of Application :05/07/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : EFFICIENT AND ECONOMIC MOSS MEDIATED SYNTHESIS OF SILVER NANO PARTICLES
FOR RESISTANCE AGAINST SOME PATHOGENS
(51) International classification :C12N
15/82
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Dr.Rajkumar Savariraj Dominic Address of Applicant :St.Andrews College Campus,
Gorakhpur,Uttar Pradesh 273001, India Uttar Pradesh India
(72)Name of Inventor :
1)Dr.Rajkumar Savariraj Dominic
2)Dr.A.Vimala
3)Dr.S.Sahaya Sathish
4)Dr.Shashank Kumar Singh
(57) Abstract :
This invention relates to the method for efficient and economic moss mediated synthesis of silver nano particles. Easily available
Campylopus flexuosus and Bryum salakense, first washed thoroughly by tap water and shade dried, then powdered fine, then mixed
with distilled water to make an aqueous moss extract, which heated at normal boiling temperature, then filtered using whatman no.1
filter paper to get clear plant extract. Silver nitrate mixed with distilled water to prepare aqueous solution. Plant extract added with
freshly prepared aqueous solution in Erlenmeyers conical flask and exposed to sunlight for the reduction of Silver nitrate into silver
nanoparticles (Ag+ ions) which inhibit more resistance against 5 different human pathogens such as Staphylococcus, Staphylococcus
aureus, Escherichia coli, Klebsiella pneumoniae and Serratia marcescens compare to extract of Campylopus flexuosus and Bryum
salakense. Which can be used in antibacterial materials, textile industry, cosmetics, coatings of various household appliances and
medical devices.
No. of Pages : 15 No. of Claims : 3
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33011
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011028931 A
(19) INDIA
(22) Date of filing of Application :07/07/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : SMART AUTONOMOUS WEED DETECTOR AND REMOVAL
(51) International classification :G01N
30/64
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Delhi Technological University Address of Applicant :Shahbad Daulatpur, Main Bawana
Road, Delhi-110042, India Delhi India
(72)Name of Inventor :
1)Mr. Sumit Kumar Sharma, Student, Computer Science
and Engineering, Delhi Technological University
2)Dr. Neetesh Kumar, Assistant Professor, Computer
Science and Engineering, Indian Institute of Technology
Roorkee
3)Prof. Rajni Jindal, Professor and HOD, Dept. of Computer
Science and Engineering, Delhi Technological University
4)Mr. Upendra Singh, Assistant Professor, Information
Technology, SGSITS, Indore
5)Mr. Sanjay Patidar, Assistant Professor, Computer
Science and Engineering, Delhi Technological University
(57) Abstract :
The application discloses autonomous weeder, this smart weeder include multisensory information acquisition module which collect
information from various sensors such as ultrasonic sensors, Infrared sensors placed on machine and process their information to make
action, Central processing unit which is GPU enabled processing hardware named as nvidia jetsonnano which performs weed
detection task using instance segmentation method,Robotic arm which wear out weeds from ground and a suction tube that sucks the
weed from robotic arm and drop it into cutting arrangement, Weeder grass cutting blade drive arrangement which cut the weed and
destroy them, Weeder vehicle wheel drive device which manages movement of machine,hydrolic suspensions and excels that increase
and decrease height of machine according to the type of weed. Sensors communicate with processing unit to provide information
about position of robot, and sensors also detect several barriers on the path of robot during the robot movement in field. In order to
detect and recognize the plants in real time through camera, Mask RCNN algorithm is used by smart weeder. To remove the weeds,
robotic arm Extirpate the weed from root itself. Its dependency on solar power makes the robot completely autonomous in terms of
energy. Cranesbill weed dataset has used to test and train the Model and this dataset is divided into 60 and 40 ratio for training and
testing respectively (60% is used for training and 40% is used for testing purpose). During the testing phase, it detects weed with
accuracy of 98.2% which proves its efficiency in the field of weed. Despite of this, the proposed model is trained on different kind of
weed, the accuracy of the proposed model remains similar.
No. of Pages : 22 No. of Claims : 8
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33012
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011028940 A
(19) INDIA
(22) Date of filing of Application :08/07/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : A MULTI-LAYERED PANEL
(51) International classification :B60J
7/19
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Indu Bala Address of Applicant :Kailash Nagar, Rewari Road, Narnaul
(street opposite to Saraswati garden), pin code 123 001, District -
Mahendergarh, Haryana, India Haryana India
2)Sangeet Kumar (72)Name of Inventor :
1)Sangeet Kumar
2)Indu Bala
(57) Abstract :
The present invention discloses a multi-layered panel. The layered panel (100) includes a first layer (102) having a thickness in the
range of 0.5 mm to 10 mm, is hydrophobic and waterproof, a second layer (104) having a thickness in the range of 0.2 mm to 5 mm
and is waterproof, a third layer (106) having a thickness in the range of 0.5 mm to 10 mm and is soft to touch, feel, and soothing to
skin. The ratio of thickness of the first to second layer is in the range of 0.1 to 50, and that of the first to third layer is in the range of
0.01 to 20. The first layer is the outermost layer, and third layer is the innermost layer. The layered panel is skin friendly, highly
durable, not damaged and/or torn, and provided with facility of cooling or heating.
No. of Pages : 30 No. of Claims : 10
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33013
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011029142 A
(19) INDIA
(22) Date of filing of Application :09/07/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : FOLDABLE BRIDGE ASSEMBLY
(51) International classification :E01D
21/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Dr. Siddharth Jain Address of Applicant :Associate Professor, Department of
Mechanical Engineering, College of Engineering Roorkee
(COER), 7th K.M. on Roorkee Haridwar Road (NH-58), Post Box
No. 27, Vardhmanpuram, Roorkee- 247667 District. Haridwar
(Uttarakhand), India. Uttarakhand India
2)Varun Pratap Singh
3)Sunil Kumar
4)Bharat Singh Prajapati
5)Nishtha Arya
6)Dr. Rajesh Kumar Upadhyay (72)Name of Inventor :
1)Dr. Siddharth Jain
2)Varun Pratap Singh
3)Sunil Kumar
4)Bharat Singh Prajapati
5)Nishtha Arya
6)Dr. Rajesh Kumar Upadhyay
(57) Abstract :
A foldable bridge assembly, comprising multiple frames 1 bolted on a ground surface and supported by several grouted ropes 2,
wherein the frames 1 are having holes for securing multiple pillars 3 in several possible configurations, a deck interconnected for
providing a pathway to user(s) to move from one end to another, wherein the deck comprises, multiple aluminium fabricated ladders 8
engraved with markings to provide grip while moving on the ladders, wherein ladders 8 are having multiple holes through which
primary ropes 5 are reeved in order to align the ladders 8 in straight line, at least two secondary ropes 9 having two ends reeved
through holes of said pillars 3 and grouted on said surface, wherein the secondary ropes 9 are linked with said primary ropes 5 through
multiple ropes 7 and metallic rings 6 in order to provide increased strength in bearing the load of said user(s).
No. of Pages : 25 No. of Claims : 9
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33014
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011029150 A
(19) INDIA
(22) Date of filing of Application :09/07/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : A RECONFIGURABLE PARALLEL 3-DIMENSIONAL CONVOLUTION CLUSTER ENGINE
(51) International classification :G06G
1/02
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)HCL Technologies Limited Address of Applicant :806, Siddharth, 96, Nehru Place, New
Delhi - 110019, India Delhi India
(72)Name of Inventor :
1)BALASUBRAMANIYAN, Prasanna Venkatesh
2)GOPALAKRISHNAN, Sainarayanan
3)RAJAGOPAL, Gunamani
(57) Abstract :
Disclosed is a reconfigurable parallel 3-Dimensional (3-D) convolution engine 100 for performing 3-D Convolution and parallel
feature map extraction on an image. The reconfigurable parallel 3-D convolution engine 100 further comprises a plurality of CNN
reconfigurable engines 111 configured to perform 3-D convolution, in parallel, to process a plurality of feature maps, , a kernel
memory space 112, present in each instance of CNN reconfigurable engine 111, capable for holding a set of parameters associated to a
network layer having each operational instance of CNN reconfigurable engine 111, and at least one memory controller 104, an Input
Feature Map Memory (FMM) 108 cluster and an Output FMM cluster 118.
No. of Pages : 22 No. of Claims : 10
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33015
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011029258 A
(19) INDIA
(22) Date of filing of Application :09/07/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : AN AUTOMATED SANITIZATION STATION
(51) International classification :H04H
60/51
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)GraphicEra Hill University, Dehradun Campus Address of Applicant :510, Society Area, Clement Town,
Dehradun 248002, Uttarakhand, India Uttarakhand India
(72)Name of Inventor :
1)ANUPRIYA
2)Dr. KAPIL GHAI
(57) Abstract :
The present invention relates to an automated sanitization station 101 for sanitization of the person. The automated sanitization station
is having two surfaces, an inner surface and an outer surface. The automated sanitization station is of hexagonal shape to provide
sanitization of the person from head to toe. The automated sanitization station 101 for sanitization of the person comprising; wherein
said sanitization station 101 comprising: i. A platform comprising of an inner surface 102 and an outer surface 103; ii. a plurality of
mist sprinklers 104; iii. A motion sensor 105; iv. a sanitizer storage tank 106; v. a pump 107 for pumping a liquid sanitizer from said
sanitizer storage tank 106 to said mist sprinklers 104; vi. a plurality of plastic tubes 108 for transferring sanitizer solution to said mist
sprinklers 104; and vii. a control unit 109, wherein said control unit comprises a timer, a relay and sensors.
No. of Pages : 18 No. of Claims : 7
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33016
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011029309 A
(19) INDIA
(22) Date of filing of Application :10/07/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : KIT FOR RAPID MICRO-PROPAGATION OF CARNATION (DIANTHUS CARYOPHYLLUS)•
(51) International classification :A61F
17/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Dr. RAJENDRA PRASAD CENTRAL AGRICULTURAL
UNIVERSITY Address of Applicant :PUSA, SAMASTIPUR BIHAR, INDIA
Bihar India
(72)Name of Inventor :
1)Dr. MITHILESH KUMAR
(57) Abstract :
The present invention discloses a kit for the rapid micro-propagation of flowers and ornamental plants comprising culture medium for
shoot multiplication, mass multiplication, shoot elongation, and rhizogenesis with a cocktail of plant growth hormones for rapid
multiplication.
No. of Pages : 30 No. of Claims : 10
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33017
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011029363 A
(19) INDIA
(22) Date of filing of Application :10/07/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : PROCESS FOR PREPARING INDENO[1,2-D]THIAZOLO[3,2-A]PYRIMIDINE CONTAINING
NITROGEN-BRIDGEHEAD
(51) International classification :C07D
213/803
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Dr. Amit K. Keshari Address of Applicant :Assistant Professor, Faculty of
Pharmaceutical Sciences, RAMA University, RAMA City,
Mandhana, Kanpur - 209217, Uttar Pradesh Uttar Pradesh India
2)Dr. Sudipta Saha
3)Dr. Gosipatala Sunil Babu
4)Dr. Biswanath Maity
5)Anurag Kumar Gautam (72)Name of Inventor :
1)Dr. Amit K. Keshari
2)Dr. Sudipta Saha
3)Dr. Gosipatala Sunil Babu
4)Dr. Biswanath Maity
5)Anurag Kumar Gautam
(57) Abstract :
The present invention provides a process for preparation of indeno[1,2-d]thiazolo[3,2-a]pyrimidine (1B - 15B). The process provides a
simple metal-free one-pot multi-component reactions for obtaining indeno[1,2-d]thiazolo[3,2-a]pyrimidine (1B-15B) by the reactions
of highly substituted a-indanone with some aromatic aldehydes and distinctive 2-aminothiazoles in a solvent in the presence of
catalytic amount of hydrochloric acid (conc. HCl). The process utilizes readily available and cost effective starting materials to
achieve the indeno[1,2-d]thiazolo[3,2-a]pyrimidine (1B - 15B) in an excellent yields (72-89%). Moreover, the reaction, being
attractively appealing, are generally connected with energy savings, short reaction periods, highly convergent, less environmental
effects, atom economy just in a single-step process from multi-reactants.
No. of Pages : 26 No. of Claims : 10
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33018
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011029506 A
(19) INDIA
(22) Date of filing of Application :11/07/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : REAL TIME DE-HAZING DEVICE AND A METHOD THEREOF
(51) International classification :G01B
9/027
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Nitesh Singh Bhati Address of Applicant :Department of Computer Science, Delhi
Technical Campus, Greater Noida Uttar Pradesh India
2)Dr. Prateek Gupta
3)Dr. Manoj Kumar Gupta
4)Mr. Anuj Kumar
5)Mr. Shiv Naresh Shivhare
6)Dr. Parulpreet Singh
7)Mr. Himansu Sekhar Pattanayak (72)Name of Inventor :
1)Nitesh Singh Bhati
2)Dr. Prateek Gupta
3)Dr. Manoj Kumar Gupta
4)Mr. Anuj Kumar
5)Mr. Shiv Naresh Shivhare
6)Dr. Parulpreet Singh
7)Mr. Himansu Sekhar Pattanayak
(57) Abstract :
The present invention is directed to a real time de-hazing device, comprising; a video capturing module for capturing polluted/ hazed
video; plurality of video frames for estimating intensity; a Transitional Convolution Neural Network (TCNN) layers for video feature
extraction and video feature mapping; and a high-quality hardware controller/chip for dehazing real polluted videos.. The method for
dehazing real polluted videos as claimed in Claim 1, comprises the steps of;capturing polluted/ hazed video using video capturing
module and estimation the intensity over video frames (video frame intensity enhancement step ); extracting features using
Transitional Convolution Neural Network (TCNN) and processing the images;adjusting video frames brightness to produce a clear
display; and de-hazing real polluted video frames using hardware controller/chip.
No. of Pages : 13 No. of Claims : 3
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33019
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011029516 A
(19) INDIA
(22) Date of filing of Application :11/07/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : Vegetarian sausage on wheat powder base
(51) International classification :A22C
11/02
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:PCT//
:01/01/1900
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)RAJENDER UJJAINWAL Address of Applicant :WZ 293, Basai Dara Pur, New Delhi -
110015 Delhi India
(72)Name of Inventor :
1)RAJENDER UJJAINWAL
(57) Abstract :
Vegetarian Sausage on Wheat Powder Base acts as a vegetarian substitute for non-vegetarian food dishes like hot-dog. This product is
good for health as it contains high level of protein content. The current invention is prepared using a special technology of production
process for various steps such as mixing the ingredients, filling them up in the casing, boiling in special temperature regime, keeping
the product for specific time and temperature regime before selling. The current invention ensures that there are no side effects or
health issues since it contains protein-based ingredients.
No. of Pages : 11 No. of Claims : 3
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33020
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011029521 A
(19) INDIA
(22) Date of filing of Application :11/07/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : AN INTERNET OF THINGS BASED SMART HI-TECH BUILDING SYSTEM FOR COVID
PROTECTION
(51) International classification :G06F
3/044
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Mr. Chinmay Jain Address of Applicant :Faculty of Engineering and Computing
Sciences, Teerthanker Mahaveer University, Moradabad, Uttar
Pradesh, India 244001 Uttar Pradesh India
2)Mr Pallav Jain
3)Mr. Mukesh Kumar
4)Dr Pankaj Kumar Goswami
5)Dr Garima Goswami
6)Dr. Rakesh Kumar Dwivedi
7)Dr. Mudita Juneja
8)Mrs Sakshi Singh
9)Mr. Rahul Vishnoi
10)Dr. Jay Singh
11)Dr Vikas Singh Bhadoria (72)Name of Inventor :
1)Mr. Chinmay Jain
2)Mr Pallav Jain
3)Mr. Mukesh Kumar
4)Dr Pankaj Kumar Goswami
5)Dr Garima Goswami
6)Dr. Rakesh Kumar Dwivedi
7)Dr. Mudita Juneja
8)Mrs Sakshi Singh
9)Mr. Rahul Vishnoi
10)Dr. Jay Singh
11)Dr Vikas Singh Bhadoria
(57) Abstract :
The present subject matter relates to An Internet of Things Based Smart Hi-Tech Building System for Covid Protection. Automation is
a technique, method, or system of operating or controlling a process by electronic devices with reducing human involvement to a
minimum. The fundamental of building an automation system for an office or building is increasing day-by-day with numerous
benefits. Industrialist and researchers are working to build efficient and affordability automatic systems to monitor and control
different machines like lights, fans, AC based on the requirement. Automation makes not only an efficient but also an economical use
of the electricity and water and reduces much of the wastage. IOT grant to people and things to be connected Any-time, anyplace, with
anyone, ideally using any network and any service. Automation is another important application of IOT technologies. It is the
monitoring of the energy consumption and the Controlling the environment in buildings, schools, offices and museums by using
different types of sensors and actuators that control lights, temperature, and humidity. The objective of this invention is to implement a
low cost, reliable and scalable building automation system that can be used to remotely switch on or off any household appliance,
using a microcontroller to achieve hardware simplicity, and from any phone to toggle the switch state.
No. of Pages : 19 No. of Claims : 4
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33021
(12) PATENT APPLICATION PUBLICATION (21) Application No.202011029552 A
(19) INDIA
(22) Date of filing of Application :11/07/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : INTEGRATED DISASTER RESPONSE SYSTEM FOR IDENTIFICATION OF SAFE LOCATIONS
USING MACHINE LEARNING AND CONSTRUCTION OF INFLATABLE SMART TEMPORARY SHELTERS
(51) International classification :G06N
20/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Dr. Aditi Sharma Address of Applicant :Associate Professor, Computer Science
and Engineering, Quantum University Roorkee - Dehradun
Highway, Mandawar, Roorkee, Uttarakhand 247167 Uttarakhand
India
2)Dr. Sachi Pandey
3)Mr. Vikas Chouhan
4)Dr. RAMESH KUMAR
5)Dr. MUNISH SABHARWAL
6)Ms. R. Deepa (72)Name of Inventor :
1)Dr. Aditi Sharma
2)Dr. Sachi Pandey
3)Mr. Vikas Chouhan
4)Dr. RAMESH KUMAR
5)Dr. MUNISH SABHARWAL
6)Ms. R. Deepa
(57) Abstract :
Natural hazards have often portrayed a crucial threat to living creatures, frequently preceded by substantial loss in survival and assets
disruption. In subsequent years, more recurrent and strenuous disasters are observed across the universe. The challenges are related to
the anticipation of the consequences of these incidents, in the sense of dynamic and interdependent financial, biodiversity and natural
ecosystems. Disaster mitigation is obsessed mostly with projecting the progress and ramifications of disasters, but also with alleviating
such undesirable consequences under time constraints. A critical and time-sensitive challenge during disaster is to evacuate survivors
and allocate safe locations to survive. This proposal devises the novel system to identify the safe locations using reinforcement
learning algorithms based on the satellite images and constructing the safe and secured inflatable temporary smart shelters like
portable bubble house for the victim people and preserving them from disaster situation. The integrated disaster response system used
for detecting the safe locations and provides the relevant response, privacy and reduce risk to the victim people. The learning
algorithm will react for diverse demands and optimized efficiency over time and space.
No. of Pages : 13 No. of Claims : 5
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33022
(12) PATENT APPLICATION PUBLICATION (21) Application No.201921031973 A
(19) INDIA
(22) Date of filing of Application :07/08/2019 (43) Publication Date : 21/08/2020
(54) Title of the invention : A COMPUTER IMPLEMENTED TOOL FOR PREPARING A PRODUCT PLACEMENT LAYOUT A
METHOD THEREOF
(51) International classification
:H01M0010440000,
G11B0017049000,
G03G0015080000,
A24D0003060000,
B65D0006220000
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application
Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)KULKARNI, Swapnil Padmakar Address of Applicant :1022, Orange Blossom, Uday Baug, BT
Kawade Rd, Pune-411013, Maharashtra, India Maharashtra India
2)KULKARNI, Tejaswini Swapnil (72)Name of Inventor :
1)KULKARNI, Swapnil Padmakar
2)KULKARNI, Tejaswini Swapnil
(57) Abstract :
ABSTRACT A COMPUTER IMPLEMENTED TOOL FOR PREPARING A PRODUCT PLACEMENT LAYOUT AND A
METHOD THEREOF The present disclosure relates to the field of preparing a product placement layout. The tool (100) comprises a
user interface (102), a repository (110), an area calculation module (106), a drawing module (104), a layout generator (114) and a
quotation generation module (108). The area calculation module (106) configured to generate a pre-layout based on the analysis result.
The drawing module (104) configured to select and insert the objects based on the generated pre-layout, and further to combine the
first set of features and the second set of features. The layout generator (118) configured to cooperate with the repository (110) and
said drawing module (104) to generate the product placement layout and the quotation generation module (108) configured to
cooperate with the repository (110) and the layout generator (118) to generate a quotation based on the generated product placement
layout.
No. of Pages : 35 No. of Claims : 5
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33023
(12) PATENT APPLICATION PUBLICATION (21) Application No.201921048999 A
(19) INDIA
(22) Date of filing of Application :28/11/2019 (43) Publication Date : 21/08/2020
(54) Title of the invention : PROCESS FOR MANUFACTURING OF COPPER-TITANIUM ALLOYS BY LOST WAX PROCESS
(INVESTMENT CASTING)
(51) International classification
:B22C0009040000,
B22C0007020000,
C22C0009000000,
B22C0009100000,
C22F0001080000
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)YASHKUMAR SINGH Address of Applicant :B/9, ANKUR CHS, BEHIND
MUKUND HOSPITAL, MAROL PIPE LINE, AIRPORT ROAD
METRO STATION, ANDHERI EAST, MUMBAI 400 059,
MAHARASHTRA, INDIA Maharashtra India
(72)Name of Inventor :
1)YASHKUMAR SINGH
(57) Abstract :
ABSTRACT PROCESS FOR MANUFACTURING OF COPPER-TITANIUM ALLOYS BY LOST WAX PROCESS
(INVESTMENT CASTING) The invention discloses a process for manufacturing of copper-titanium alloy by a lost wax process. This
process comprises the steps: fixing a crucible (12) in an induction melting furnace (10); preheating said crucible (12) followed by
charging said crucible with copper scrap in an amount of 90% to 99% by weight; adding at least 99% pure titanium scrap in an amount
of 1% to 10% by weight, to obtain a mixture; continuously stirring said mixture to attain a homogenous melt; pouring said
homogenous melt into an investment casting shell of a pre-determined product followed by cooling and baking followed by cooling to
obtain copper titanium cooled castings; knocking off cooled copper titanium castings and subjecting said castings to fettling operation,
and shot blasting and blasting operation to remove surface impurities; and solution annealing said copper titanium castings and
quenching followed by precipitation hardening process where copper titanium castings are aged.
No. of Pages : 31 No. of Claims : 12
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33024
(12) PATENT APPLICATION PUBLICATION (21) Application No.202021002802 A
(19) INDIA
(22) Date of filing of Application :22/01/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : A METHOD OF CERIUM SULFIDE CARBON BASED COMPOSITE THIN FILM COATING FOR
SUPERCAPACITOR
(51) International classification :H01L21/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)DR. VISHWANATH VITHAL BHOSALE Address of Applicant :D.Y. PATIL EDUCATION SOCIETY
(DEEMED TO BE UNIVERSITY), KASABA BAWADA,
KOLHAPUR - 416006, MAHARASHTRA, INDIA. Maharashtra
India
(72)Name of Inventor :
1)PROF. CHANDRAKANT DNYANDEV LOKHANDE
2)MR. DHANAJI BALASO MALAVEKAR
3)MR. VIKAS JAYVANT MANE
4)DR. VISHWANATH VITHAL BHOSALE
5)MR. VAIBHAV CHANDRAKANT LOKHANDE
(57) Abstract :
A method is developed for coating of cerium sulfide-multi walled carbon nanotubes (Ce2S3-MWCNTs) composite on metallic and
non-metallic solid surfaces using chemical method namely, successive ionic adsorption and reaction (SILAR) method which works in
low temperature range with changing concentration and pH of precursor solutions. The X-ray diffraction and field emission scanning
electron microscopic analyses of Ce2S3-MWCNTs composite coating shows cubic crystal structure with surface comprising of
interconnected nanoparticles morphology useful for supercapacitor application. The maximum specific capacitance of 582.00 F g-1 is
obtained in 1 M KOH electrolyte.
No. of Pages : 17 No. of Claims : 7
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33025
(12) PATENT APPLICATION PUBLICATION (21) Application No.202021009087 A
(19) INDIA
(22) Date of filing of Application :03/03/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : DOG TREATS
(51) International classification
:B61K0009120000,
A61K0039395000,
G01N0033569000,
A61B0018040000,
G06F0016130000
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Akshay Vaidya Address of Applicant :103, Celestine Lane 2-C Bavdhan
Khurd, Pune Maharashtra India
(72)Name of Inventor :
1)Akshay Vaidya
(57) Abstract :
Abstract: The treats that I have designed will aid the purpose of passing on physical nutraceuticals and pharmaceutical preparations
disguised through the treats. These treats will act as a delivery mechanism for multiple sources. The pharmaceutical and/or
nutraceuticals do not usually carry a flavour and thus are resented by pets making them difficult to administer. These will be
administered through a cavity in the treats
No. of Pages : 10 No. of Claims : 2
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33026
(12) PATENT APPLICATION PUBLICATION (21) Application No.202021017542 A
(19) INDIA
(22) Date of filing of Application :24/04/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : PHS-DEVICE: PORTABLE HAND SANITIZER DEVICE (TIMER, SANITIZER, MOBILE
CONTROLLER)
(51) International classification
:A47K0005120000,
A44C0005000000,
A44C0015000000,
A45D0034020000,
A61L0002180000
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application
Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)MR. UDAY.C. PATKAR Address of Applicant :A-24, KUNAL NEST MANIK
COLONY, LINK ROAD, NEAR DARSHAN HALL,
CHINCHWAD PUNE-411033, MH, INDIA. E-Mail :
[email protected] Maharashtra India
2)GAURI BABURAO KOLEKAR
3)HUZAIF UMARSHARIF MUJAWAR
4)SHAHEEN MEHABOOB MULLA.
5)SHRAVANI SANJAY TONGE (72)Name of Inventor :
1)MR. UDAY.C. PATKAR
2)GAURI BABURAO KOLEKAR
3)HUZAIF UMARSHARIF MUJAWAR
4)SHAHEEN MEHABOOB MULLA.
5)SHRAVANI SANJAY TONGE
(57) Abstract :
Patent Title: PHS-Device: PORTABLE HAND SANITIZER DEVICE (TIMER, SANITIZER, MOBILE CONTROLLER)
ABSTRACT My Invention PHS-Device is you know in today™s world the need for self-cleanliness and hygiene is of utmost priority.
The use of sanitizers has surly help a lot of people in the need for this hygiene, but the main issue here is that many of us tend to
always forget it carrying it around or don™t prefer to take those ugly looking small bottles with us. So to counter this or add a bit of
style to the above comment, we have come up with the idea of making a portable hand sanitizer device (Time, Sanitizer, mobile
controller) that can be made into or to like a stylish band with the capacity to carry sanitizer in it. A portable tube can also be created
to be fit into or made into designer bands depending on the dimension of the band and the need to add a small opening to let the flow
of sanitizer to and from it. The PHS-Device that is user friendly, leak-proof, and cost-effective and comprises a sponge enclosed in a
silicone case which then is placed in a pocket located on an Invention. The silicone case has a plurality of self-sealing slits to control
release of sanitizer and a plurality of refill apertures for allowing the user to fill it up with a required quantity of sanitizer. The pocket
also contains a plurality of openings to control release of sanitizer. When the pocket on the wristband is not compressed, the sponge
inside the silicone case absorbs sanitizer so that inadvertent fluid leakage will not occur. The PHS-Device for dispensing sanitizer
fluid includes a wristband wearable about a user's wrist. A reservoir in the wristband holds sanitizing fluid. An outlet nozzle
selectively dispenses a predetermined quantity of the sanitizing fluid. A dispensing assembly is situated intermediate the outlet nozzle
and the reservoir and is in communication with the reservoir for selectively dispensing on demand the sanitizer fluid from the reservoir
to a place outside the wristband. A first actuator is normally biased to an unactuated configuration but, when actuated, allows the
sanitizer fluid to pass through the dispensing assembly to the outlet nozzle. A second actuator in communication with the first actuator
is normally biased to an unactuated configuration that prevents the first actuator from being actuated but, when actuated, allows the
first actuator to be actuated to allow sanitizer fluid to pass through the dispensing assembly to the outlet nozzle and all above invention
controlled, monitor by user mobile.
No. of Pages : 21 No. of Claims : 9
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33027
(12) PATENT APPLICATION PUBLICATION (21) Application No.202021024123 A
(19) INDIA
(22) Date of filing of Application :09/06/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : DR VITHALRAO VIKHE PATIL FOUNDATION'S MEDICAL COLLEGE INTRODUCES FIRST
DIGITAL (VIRTUAL) FORENSIC MEDICINE MUSEUM OF INDIA TO AID JUSTICE TO SOCIETY
(51) International classification :H04W
21/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)DR. SANDEEP SITARAM KADU Address of Applicant :DEPARTMENT. OF FORENSIC
MEDICINE, DR. VITHALRAO VIKHE PATIL
FOUNDATION'S MEDICAL COLLEGE AND HOSPITAL,
AHMEDNAGAR 414111, MAHARASHTRA, INDIA.
Maharashtra India
2)DR. ABHIJIT DIWATE
3)DR. SUNIL NATHA MHASKE
4)DR. MRS. SWATI SANDEEP KADU
5)DR. RUCHA TIPARE (72)Name of Inventor :
1)DR. SANDEEP SITARAM KADU
(57) Abstract :
Abstract Title- Dr. Vithalrao Vikhe Patil Foundations Medical College introduces first digital (virtual) Forensic medicine museum of
India-To aid justice to society. Introduction-Museum is an integral tool of learning and teaching. In the classroom, educationalists can
present information to students in many ways via lecture, video, or readings. After theory class immediately student can visit museum
and see the practical aspects, of the topic. An important role of a museum is to make its heritages become a part of our life, much like
the functions of a library. Based on this aspiration, the digital curation of a museum has become an integral part of both the academic
and public sectors. Forensic medicine deals with application of scientific medical knowledge in court of law for administration of
justice. This subject deals with different medicolegal aspects of medical sciences like different injuries, sexual offences, poisoning
cases. Proper knowledge of this subject helps the medical graduate to deposit proper evidence in court of law and thus helps in
administrating correct justice to victim. Forensic medicine museum consists of information and its medicolegal aspects of different
poisons, weapons, bones, photographs etc. In museum medicolegal charts, different medicolegal wet specimens, models, X- rays are
displayed. We have created a website to have a look at this digital museum, and the link for same is-www. v imsfmtm useum .com
Aims and Objectives -To Create first Digital Forensic Medicine museum as educational tool for all stakeholders of medical science
and judiciary including medical students, Indian medical graduates, lawyers, judges and public. Conclusion- With Digitalization of our
Forensic Medicine museum, it is available on tip of the fingers to all stakeholders of medical science and judiciary. It helps clearing
different medicolegal concepts of Indian Medical graduates, lawyers so that it is serving in depositing proper evidence in court of law
for administration of correct justice.
No. of Pages : 6 No. of Claims : 3
-
The Patent Office Journal No. 34/2020 Dated 21/08/2020 33028
(12) PATENT APPLICATION PUBLICATION (21) Application No.202021024749 A
(19) INDIA
(22) Date of filing of Application :12/06/2020 (43) Publication Date : 21/08/2020
(54) Title of the invention : A DISPOSABLE PAPER SPITTOON WITH A REUSABLE PLASTIC ATTACHMENT
(51) International classification :C08