official journal of the patent officeipindia.nic.in/writereaddata/portal/ipojournal/1_2615_1/...the...
TRANSCRIPT
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19384
पेटेंट कार्ाालर्
शासकीर् जर्ाल
OFFICIAL JOURNAL
OF
THE PATENT OFFICE
नर्र्ामर् स.ं 21/2018 शकु्रवार दिर्ाकं: 25/05/2018 ISSUE NO. 21/2018 FRIDAY DATE: 25/05/2018
पटेेंट कार्ाालर् का एक प्रकाशर्
PUBLICATION OF THE PATENT OFFICE
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19385
INTRODUCTION
In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005
effective from 01st January 2005, the Official Journal of The Patent Office is required to be published under
the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings
on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on
this Official Journal and other information as required by the public should be addressed to the Controller
General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that
the content can be enriched.
( Om Prakash Gupta ) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS
25TH
MAY, 2018
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19386
CONTENTS
SUBJECT PAGE NUMBER
JURISDICTION : 19387 – 19388
SPECIAL NOTICE : 19389 – 19390
EARLY PUBLICATION (DELHI) : 19391 – 19400
EARLY PUBLICATION (MUMBAI) : 19401 – 19452
EARLY PUBLICATION (CHENNAI) : 19453 – 19498
EARLY PUBLICATION ( KOLKATA) : 19499 – 19500
PUBLICATION AFTER 18 MONTHS (DELHI) : 19501 – 19677
PUBLICATION AFTER 18 MONTHS (MUMBAI) : 19678 – 19720
PUBLICATION AFTER 18 MONTHS (CHENNAI) : 19721 – 19966
PUBLICATION AFTER 18 MONTHS (KOLKATA) : 19967 – 19977
WEEKLY ISSUED FER (DELHI) : 19978 – 20024
WEEKLY ISSUED FER (MUMBAI) : 20025 – 20043
WEEKLY ISSUED FER (CHENNAI) : 20044 – 20080
WEEKLY ISSUED FER (KOLKATA) : 20081 – 20098
APPLICATION FOR RESTORATION OF LAPSED PATENT
U/S 60 :PUBLICATION U/S 61(1) RULE 84(3)(DELHI) : 20099
PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE
GRANT (DELHI) : 20100 – 20106
PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE
GRANT (MUMBAI) : 20107 – 20108
PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE
GRANT (CHENNAI) : 20109 – 20112
PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE
GRANT (KOLKATA) : 20113 – 20115
INTRODUCTION TO DESIGN PUBLICATION : 20116
COPYRIGHT PUBLICATION
: 20117 – 20118
RESTORATION OF LAPSED DESIGNS UNDER SECTION 12 (2)
OF THE DESIGNS ACT, 2000 : 20119
REGISTRATION OF DESIGNS : 20120 - 20166
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19387
THE PATENT OFFICE
KOLKATA, 25/05/2018
Address of the Patent Offices/Jurisdictions The following are addresses of all the Patent Offices located at different places having their Territorial
Jurisdiction on a Zonal basis as shown below:- 1 Office of the Controller General of Patents,
Designs & Trade Marks, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill, Mumbai – 400 037
Phone: (91)(22) 24123311, Fax : (91)(22) 24123322 E-mail: [email protected]
4 The Patent Office, Government of India, Intellectual Property Rights Building, G.S.T. Road, Guindy, Chennai – 600 032. Phone: (91)(44) 2250 2081-84 Fax : (91)(44) 2250 2066 E-mail: [email protected]
The States of Andhra Pradesh, Telangana, Karnataka, Kerala, Tamil Nadu and the Union Territories of Puducherry and Lakshadweep.
2 The Patent Office, Government of India, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill,
Mumbai – 400 037 Phone: (91)(22) 24137701 Fax: (91)(22) 24130387
E-mail: [email protected] The States of Gujarat, Maharashtra, Madhya
Pradesh, Goa and Chhattisgarh and the Union Territories of Daman and Diu & Dadra and Nagar Haveli
5
The Patent Office (Head Office), Government of India, Boudhik Sampada Bhavan, CP-2, Sector –V, Salt Lake City, Kolkata- 700 091 Phone: (91)(33) 2367 1943/44/45/46/87 Fax: (91)(33) 2367 1988 E-Mail: [email protected]
Rest of India 3
The Patent Office, Government of India, Boudhik Sampada Bhavan, Plot No. 32., Sector-14, Dwarka, New Delhi – 110075 Phone: (91)(11) 25300200 & 28032253 Fax: (91)(11) 28034301 & 28034302 E.mail: [email protected]
The States of Haryana, Himachal Pradesh, Jammu and Kashmir, Punjab, Rajasthan, Uttar Pradesh, Uttaranchal, Delhi and the Union Territory of Chandigarh.
Website: www.ipindia.nic.in www.patentoffice.nic.in All applications, notices, statements or other documents or any fees required by the Patents Act, 1970
and The Patents (Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received
only at the appropriate offices of the Patent Office. Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of
Patents drawn on a scheduled Bank at the place where the appropriate office is situated.
mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]://www.ipindia.nic.in/
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19388
पेटेंट कार्ाालर्
कोलकाता, दिर्ाकं 25/05/2018
•कार्ाालर्ों के क्षते्रानिकार के पत े
नवनिन्न जर्हों पर नथित पेटेंट कार्ाालर् के पते आचंनलक आिार पर िर्शात उर्के प्रािनेशक अनिकार क्षते्र के
साि र्ीच ेदिए र्ए है:-
1 कार्ाालर् : महानर्र्तं्रक, एकथव, अनिकल्प
तिा व्यापार नचहर्,
एंटोप नहल डाकघर के समीप,
एस. एम. रोड, एंटोप नहल, ममु्बई- 400 037, िारत,
फोर्: (91) (22) 24123311
फ़ैक्स: (91) (22) 24123322
ई. मेल: [email protected]
4 पटेेंट कार्ाालर्, िारत सरकार
इंटेलेक्चअुल प्रॉपटी राइट्स नबलल्डंर्, इंडनथिर्ल इथटेट
एसआईडीसीओ आरएमडी र्ोडाउर् एररर्ा
एडजसने्ट टु ईर्ल फ्लाथक, जी. एस. टी. रोड,
र्ार्न्डी
चने्नई - 600 032.
फोर्: (91)(44) 2250 2081-84
फ़ैक्स: (91)(44) 2250-2066
ई. मेल: [email protected]
आन्र प्रिेश, तलेंर्ार्ा, कर्ााटक, केरल, तनमलर्ाडु
तिा पडुुचरेी राज्र् क्षते्र एवं सघं शानसत क्षते्र,
लक्षिीप
2 पटेेंट कार्ाालर्, िारत सरकार
बौनिक सपंिा िवर्,
एंटोप नहल डाकघर के समीप,
एस. एम. रोड, एंटोप नहल, ममु्बई- 400 037,
फोर्: (91) (22) 24137701
फ़ैक्स: (91) (22) 24130387
ई. मेल: [email protected]
•र्जुरात, महाराष्ट्र, मध्र् प्रिेश, र्ोवा तिा छत्तीसर्ढ़ राज्र् क्षते्र एव ंसघं शानसत क्षते्र, िमर् तिा िीव, िािर और र्र्र हवलेी.
5 पटेेंट कार्ाालर्, िारत सरकार कोलकाता, (प्रिार् कार्ाालर्)
बौनिक सपंिा िवर्,
सीपी-2, सेक्टर- V, साल्ट लेक नसटी,
कोलकाता-700 091, िारत.
फोर्: (91)(33) 2367 1943/44/45/46/87
फ़ैक्स:/Fax: (91)(33) 2367 1988
ई. मेल: [email protected]
िारत का अवशेष क्षते्र
3 पटेेंट कार्ाालर्, िारत सरकार
बौनिक सपंिा िवर्,
प्लॉट स.ं 32, सके्टर- 14, द्वारका, र्ई दिल्ली- 110 075.
फोर्: (91)(11) 25300200, 28032253
फ़ैक्स: (91)(11) 28034301, 28034302
ई. मेल: [email protected]
हररर्ाणा, नहमाचल प्रिेश, जम्मू तिा कश्मीर, पजंाब,राजथिार्,
उत्तर प्रिेश, दिल्ली तिा उत्तराचंल राज्र् क्षते्रों, एवं सघं शानसत
क्षते्र चडंीर्ढ़
वेबसाइट: http://www.ipindia.nic.in www.patentoffice.nic.in
पटेेंट अनिनर्र्म, 1970 तिा पटेेंट (सशंोिर्) अनिनर्र्म, 2005 अिवा पटेेंट (सशंोिर्) नर्र्म, 2006 द्वारा वानंछत सिी
आवेिर्, सूचर्ाए, नववरण र्ा अन्र् िथतावेज़ र्ा कोई शलु्क पटेेंट कार्ाालर् के केवल उपर्कु्त कार्ाालर् में थवीकृत होंर्े।
शलु्क: शलु्क र्ा तो र्र्ि रूप में र्ा Controller of Patents के र्ाम में िेर् बैंक ड्राफ्ट र्ा चके के द्वारा िजेी जा सकती ह ैजो उसी
थिार् के दकसी अर्ुसनूचत बैंक में प्रित्त हो जहााँ उपर्कु्त कार्ाालर् नथित ह ै।
mailto:[email protected]:[email protected]:[email protected]://www.ipindia.nic.in/
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19389
SPECIAL NOTICE
18 Months publication as required under Section 11A of the Patents Act, 1970
as amended by the Patents (Amendment) Act, 2005.
Notice is hereby given that any person at any time before the grant of Patent may give representation by way of
opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under
section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules,
2006.
Notice is also given that if any interested person requests for copies of the complete specification, drawing and
abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as
per the jurisdiction on payment of prescribed fees of Rs.8/- per page. If any further details are required to be
obtained, the same can be provided by the respective Patent Offices on request.
(Om Prakash Gupta) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19390
SPECIAL NOTICE
Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005
and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III,
Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published
containing all the activities of The Patent Office such as publication of all the patent applications after 18th
months , grant of patents & all other information in respect of the proceedings as required under the provisions
of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday.
The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are
discontinued from 01/01/2009.
SPECIAL NOTICE
Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.
However, if duplication of publication of any application is found, then earlier date of publication will be taken
for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months
from the date of second publication, provided that there is there is no third party representation.
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19391
Early Publication: The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule
24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of
Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents
(Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006:
(12) PATENT APPLICATION PUBLICATION (21) Application No.201711037837 A
(19) INDIA
(22) Date of filing of Application :25/10/2017 (43) Publication Date : 25/05/2018
(54) Title of the invention : A METHOD OF EXPRESSION OF COAT PROTEIN GENE OF BANANA BUNCHY TOP VIRUS
(BBTV) IN BACTERIAL HOST
(51) International classification
:C12N
7/00;
C12N
15/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)SHARDA UNIVERSITY Address of Applicant :32-34, Knowledge Park 3, Greater
Noida, 201306, Uttar Pradesh (UP), India Uttar Pradesh India
2)DEPARTMENT OF BIOTECHNOLOGY (72)Name of Inventor :
1)Shahana Majumder
(57) Abstract :
The present invention generally relates to a method of expression of coat protein for expression of a gene in a bacterial host. The
present invention particularly relates to the expression of coat protein gene of Banana bunchy top virus (BBTV) in bacterial host. The
expressed protein could be used for starting an immune reaction for the production of antibody. The pGEX-5X expression vector
backbone was used for creating the nucleic acid construct of coat protein. This leads to the production of a GST-fusion protein of
~50Kd. Fig. (7)
No. of Pages : 31 No. of Claims : 10
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19392
(12) PATENT APPLICATION PUBLICATION (21) Application No.201711044066 A
(19) INDIA
(22) Date of filing of Application :08/12/2017 (43) Publication Date : 25/05/2018
(54) Title of the invention : PLANT EXTRACT FOR ANTIDIABETIC, HEPATOPROTECTIVE AND ANTIOXIDANT ACTIVITY
(51) International classification :A61K36/185
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)DR. ALOK KUMAR DASH Address of Applicant :QR-101, TRANSIT HOUSE VBSP
UNIVERSITY CAMPUS, JAUNPUR, UTTAR PRADESH-
222003, INDIA Uttar Pradesh India
2)DR. JHANSEE MISHRA (72)Name of Inventor :
1)DR. ALOK KUMAR DASH
2)DR. JHANSEE MISHRA
(57) Abstract :
The present invention relates to novel use of the extracts of Ocimum canum plant species. The present invention particularly relates to
novel use of the extracts of Ocuman canum leaves, which show antidiabetic, hepatoprotective and antioxidant activity.. Hie present
invention also relates to a process for the preparation of novel herbal extract of Ocimum canum species with antidiabetic,
hepatoprotective and antioxidant activity and also to the use thereof for the treatment of diabetic, hepatoprotective and antioxidant
activity.
No. of Pages : 21 No. of Claims : 5
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19393
(12) PATENT APPLICATION PUBLICATION (21) Application No.201811002994 A
(19) INDIA
(22) Date of filing of Application :25/01/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : SMART JOB FIRST DYNAMIC ROUND ROBIN SIMULATOR (SJFDRR)
(51) International classification :H04L47/10
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:PCT//
:01/01/1900
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Amit Kumar Gupta Address of Applicant :Suresh Gyan Vihar University, Jaipur,
Rajasthan Rajasthan India
2)Dr Dinesh Goyal (72)Name of Inventor :
1)Amit Kumar Gupta
2)Dr Dinesh Goyal
(57) Abstract :
In present invention, first the researcher will calculate a smart priority factor ˜SPF™ is for every process. The process which has
smallest ˜SPF™ value will be scheduled first. In this work every process has two types of priority one is user priority which is given
by user itself (PRU) and second is the system priority which is defined by scheduling system in such a way that lowest burst time has
highest system priority (PRS). The two important factors are also taken for calculating smart priority factor (SPF) which is user
priority ratio (UPR) and system priority ratio (SPR). The user priority has more importance so the user priority ratio is given 55%
weight and system priority ratio is given 45% weight. Suppose that all the processes has arrived at same time i.e. arrival time = 0.
Then Smart Priority Factor ˜SPF™ is calculated as SPF=PRU*UPR+PRS*SPR. So we calculate SPF for every process and decide
which process will schedule first on the basis of SPF value.
No. of Pages : 21 No. of Claims : 14
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19394
(12) PATENT APPLICATION PUBLICATION (21) Application No.201811003383 A
(19) INDIA
(22) Date of filing of Application :30/01/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : A METHOD OF LINKING A NON-GEO-REFERENCED MAP WITH A GEO-REFERENCED MAP
(51) International classification :G06Q30/06
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)SHARDA UNIVERSITY Address of Applicant :32-34, Knowledge Park 3, Greater
Noida, 201306, Uttar Pradesh (UP), India Uttar Pradesh India
(72)Name of Inventor :
1)Dr. Satyaprakash
(57) Abstract :
The present invention provides an a method (1000) of linking a non-geo-referenced map with a geo-referenced map comprising the
steps of obtaining (100) a plurality of geographic coordinates along a tracking path of a geographical area by a tracking device,
deriving (200) a first geo-referenced map defining the boundary and inner tracks of the geographical area by a map processing
platform, manually indicating (300) landmarks on the first geo-referenced map to obtain a second non-geo-referenced map, digitizing
(400) the second non-geo-referenced map and linking (500) the digitized second non-geo-referenced map with the first geo-referenced
map of the geographical area for obtaining a geo-referenced integrated map. Further, the plurality of geographic coordinates
collectively defines the boundary and inner tracks of the geographical area.
No. of Pages : 27 No. of Claims : 5
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19395
(12) PATENT APPLICATION PUBLICATION (21) Application No.201811007994 A
(19) INDIA
(22) Date of filing of Application :05/03/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : INDUCED DRAFT FAN FOR ZIG ZAG BRICK KILN
(51) International classification :F23N3/082
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)NARINDER PAL SINGH Address of Applicant :544 AGGARSAIN CHOWK, OLD
SAHARANPUR ROAD, JAGADHRI YAMUNA NAGAR
HARYANA-135003, INDIA Haryana India
(72)Name of Inventor :
1)NARINDER PAL SINGH
(57) Abstract :
Installation of the Induced Draft Fan in the Kiln reduces the consumption of coal in the process of making brick because it helps the
fuel to be utilized to its maximum value due to complete combustion of fuel. The use of Induced Draft Fan utilizes the fuel to its
maximum value due to complete combustion of fuel which in turns helps in the reduction of consumption of coal which is the main
fuel used in Brick Kiln. Reduction in coal consumption decreases particulate level in the kiln and surrounding areas and helps in
saving the environment from harmful pollutants. The Implementation of Induced Draft fan within the Kiln will help in increasing the
confined space which in turn reduces the chances of brick being burnt or broken, hence the Production of Brick increases. Induced
Draft Fan helps in faster operation of Kiln by increasing the length of pre-heating zone and decreases the size of cooling zone. The
increase of fuel gas heat recovery increases the pre-heat capacity of kiln which provides a better working environment to the labour.
No. of Pages : 12 No. of Claims : 10
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19396
(12) PATENT APPLICATION PUBLICATION (21) Application No.201811014439 A
(19) INDIA
(22) Date of filing of Application :16/04/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : AN APPARATUS AND PROCESS FOR PRINTING WITH TACTILE AND GLITTER EFFECT ON
FLEXIBLE SUBSTRATE AND PRINTED SUBSTRATE THEREOF
(51) International classification :D21H19/68
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)CHATURVEDI, ASHOK Address of Applicant :305, Third Floor Bhanot Corner,
Pamposh Enclave, GK-1 New Delhi - 110048 India Delhi India
(72)Name of Inventor :
1)CHATURVEDI, ASHOK
(57) Abstract :
An apparatus and process for producing multicolour print with tactile and glitter or other effect on a flexible substrate (100, 400A) is
disclosed. The rotogravure printing machine includes a plurality of printing stations (402, 404, 406, 408 and 410) and an inline coating
station (412). Printing cylinder of atleast one of the printing stations is engraved with depth (d1, d2) between 20 microns and 300
microns, to transfer large volume of radiation curable inks mixed with or without glitter. The coating station (412) provides a clear
coat of radiation curable coating mixed with or without glitter, at desirable location on the substrate. The gravure or flexography based
coating station may apply spot coating or overall coating based on the requirement. Atleast one of the printing stations and the coating
station may include curing unit (422, 424, 426 and 432) for curing the printed ink and applied coating.
No. of Pages : 28 No. of Claims : 22
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19397
(12) PATENT APPLICATION PUBLICATION (21) Application No.201811015040 A
(19) INDIA
(22) Date of filing of Application :20/04/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : A NOVEL INTEGRAL SYSTEM FOR SOLVING INCREASING PARKING PROBLEM
(51) International classification :E01C1/04
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)MANJU KHARI Address of Applicant :AMBEDKAR INSTITUTE OF
ADVANCED COMMUNICATION TECHNOLOGY AND
RESEARCH, GEETA COLONY, DELHI-110031 Delhi India
2)RASHMI GUPTA
3)VEDANT CHAUHAN
4)SHIKHAR SHARMA
5)RAJIV KAPOOR (72)Name of Inventor :
1)MANJU KHARI
2)RASHMI GUPTA
3)VEDANT CHAUHAN
4)SHIKHAR SHARMA
5)RAJIV KAPOOR
(57) Abstract :
A novel integral for solving increasing parking system issues characterized by the 10T is the integral part of the system and the said
system comprises; a. Hard ware layer b. Cloud Layer c. Application Layer wherein the hardware layer consist of sensor and hard ware
processing unit which is Arduino UNO unit and the said layer infrastructure and provides its information and communicate statutes to
database which is part of cloud layers and wherein said cloud layers is main processing unit which communicate computing centre
which provides best available parking space/location and wherein the application layer consist of user interface which takes
information and computing centre of user and send it to cloud layer and wherein the layers provided with the infrared sensors,
ultrasonic sensors, navigation system, user interface, computing centre database at appropriate places.
No. of Pages : 19 No. of Claims : 7
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19398
(12) PATENT APPLICATION PUBLICATION (21) Application No.201811015392 A
(19) INDIA
(22) Date of filing of Application :24/04/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : OPTIMAL POWER GENERATION FROM HYBRID RENEWABLE ENERGY SYSTEM TITLE
(51) International classification :H02J3/382
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)MOHAMMAD JUNAID KHAN Address of Applicant :HOUSE NO: 6045, MALOYA
COLONY, CHANDIGARH-160025, INDIA Chandigarh India
(72)Name of Inventor :
1)MOHAMMAD JUNAID KHAN
(57) Abstract :
A hybrid renewable energy system and its intelligent method for controlling the output power of renewable energy sources. The
hybrid system includes a rechargeable energy storing device and power generation units for feeding a critical and/ or neighbouring
loads and/ or grid connected system. The energy systems include dispiatchable-sources such as fuel cell system and battery units and
non-dispatchable sources of energy, such as photo-voltaic, and wind turbine system. A processing unit to control the maximum power
of renewable energy systems. Power from, all the sources is extracted at a delink, using power converter and processing unit. The
system is capable of supplying power to the grid and a stand-alone load (even in case of grid failure).
No. of Pages : 14 No. of Claims : 10
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19399
(12) PATENT APPLICATION PUBLICATION (21) Application No.201811016546 A
(19) INDIA
(22) Date of filing of Application :02/05/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : TECHNICAL ENHANCEMENT OF MICROWAVE MEDICAL WASTE DISINFECTION SYSTEM
WITH LATEST TECHNOLOGY
(51) International classification :A61L11/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)SS MEDICAL SYSTEMS (I) PVT. LTD. Address of Applicant :4TH FLOOR, TRADE TOWER, MG
MARG, LUCKNOW UTTAR PRADESH-226001 INDIA. Uttar
Pradesh India
(72)Name of Inventor :
1)SS MEDICAL SYSTEMS (I) PVT. LTD.
(57) Abstract :
Apparatus for disinfection & sterilization of wet or dry in a humid environment, and liquids, in particular wastes infected,xSuch as
medical wastes in which the material is treated. Permeabfle microwaves are introduced into a treatment chamber which can be
exposed to the aclion of microwaves and tightly sealed with plurality of magnetrons in the coupled echo chamber forms the treatment
space in which it is hindered to monitor and use the physical parameters in the apparatus. To control the installation in which the
added units are provide*;! to influence the process. A device for disinfecting, heating, sterilizing and / or disinfecting agents or dry
materials, wet or dry in a-hilmid environment, and liquids, particularly waste, are likely to be infected materials are introduced into a
vessel permeable to microwaves in a pressurized treatment chamber treated! by the microwaves And tightly sealed with the pressure
wherein a plurality of magnetrons are coupled in the resonance space to form the processing space so as to avoid microwaves in which
physical parameters are monitored and used in the apparatus if necessary to perform the installation And in which units are added to
the progressof the process, or as well as pasteurization processes, disinfection are also sterilization of dry material or materials, wet or
wet in a humid environment and of liquids. OptiMaser Microwave Medical waste Disinfection system (MMDS) replaces the
conventional Autoclave, Effluent Treatment Plant (ETPJ and "partly the Incinerator. OptiMaser eliminates the hospital borne
secondary infections like HIV, M. Tuberculosis H37Rv, and Hepatitis B&C etc., caused by dubious reuse./ misuse of medical plastic
leading to high patient mortality rate.
No. of Pages : 6 No. of Claims : 10
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19400
(12) PATENT APPLICATION PUBLICATION (21) Application No.201811017376 A
(19) INDIA
(22) Date of filing of Application :08/05/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : A SYSTEM FOR EFFICIENT TASK ALLOCATION BASED ON GREEN COMPUTING IN PRIVATE
CLOUD AND METHODS THEREOF
(51) International classification :G06F9/5094
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)NEERAJ SINGLA Address of Applicant :CHANDIGARH GROUP OF
COLLEGES, LANDRAN, MOHALI, 140307, PUNJAB Punjab
India
2)DR VIJAY LAXMI (72)Name of Inventor :
1)NEERAJ SINGLA
2)DR VIJAY LAXMI
(57) Abstract :
The present invention relates to cloud computing and its background describing the architecture, models and benefits moving further
towards the concept of green cloud computing as the energy efficiency is one of major problem with cloud computing. The proposed
work thus puts forward an efficient energy consumption technique. Keeping in mind the problems formulated in the existing system.
The proposed technique cloud environment is developed in java, deployed on cloud sim toolkit and the experimental results have been
compiled as per quantitative analysis. In proposed techniques power saving in green cloud environment has been done using k means
clustering at virtual machine level to classify the machines as low level and high level virtual machines. The cloudlets are also
categorized into 3 parts: Suspend able cloudlets, cancellable cloudlets and non-premtable cloudlets. The processors are running using
DVFS mechanism that will operate in different frequency and power modes to execute the cloudlets of different leases.
No. of Pages : 21 No. of Claims : 10
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19401
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821015304 A
(19) INDIA
(22) Date of filing of Application :23/04/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : ROTAR DISC MOTION UTILISING POWER SOURCE (RDMUPS)
(51) International classification :B62M
6/80
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)RUTURAJ KALE Address of Applicant :ST. VINCENT PALLOTTI COLLEGE OF
ENGINEERING & TECHNOLOGY, GAVSI MANAPUR, WARDHA
ROAD, NAGPUR-441 108, MAHARASHTRA, INDIA. Maharashtra
India
2)RAJDEEP NITNAWARE
3)SANGHARSH RAUT
4)ABHILASH DHOKE
5)ANMOL DURUGKAR
6)ANIRUDDHA BAGCHI
7)BHAVESH NIRWAN
8)CHINMAY NANDEDKAR
9)MAHESH MOHAN
10)MAYUR SONKUSARE
11)NAKUL INGEWAR
12)PRATEEK PARAGAONKAR
13)SAHIL DHABALE
14)SAMPRIT SHAMKUWAR
15)SAMYAK BULKUNDE
16)SHIVSAGAR DHAMNE
17)SUSHANT KASE
18)SUYOG ASWAR
19)VAIBHAV SHITOLE
20)HOMESHWAR NAGPURE (72)Name of Inventor :
1)RUTURAJ KALE
2)RAJDEEP NITNAWARE
3)SANGHARSH RAUT
4)ABHILASH DHOKE
5)ANMOL DURUGKAR
6)ANIRUDDHA BAGCHI
7)BHAVESH NIRWAN
8)CHINMAY NANDEDKAR
9)MAHESH MOHAN
10)MAYUR SONKUSARE
11)NAKUL INGEWAR
12)PRATEEK PARAGAONKAR
13)SAHIL DHABALE
14)SAMPRIT SHAMKUWAR
15)SAMYAK BULKUNDE
16)SHIVSAGAR DHAMNE
17)SUSHANT KASE
18)SUYOG ASWAR
19)VAIBHAV SHITOLE
20)HOMESHWAR NAGPURE
(57) Abstract : ROTAR DISC MOTION UTILISING POWER SOURCE is a electrical power generation unit in automobiles. It is possible when the automobile is provided with DISC BRAKE. When the SPEED OF DISC is getting waste when in motion i.e in nonbraked condition, its proper utilization should be there.
THEREFORE THE EMF GENERATION IS POSSIBLE WITH THAT USING THE PRINCIPLE of FARADAYS LAW OF E.M.F GENERATION i.e a current
carrying conductor subjected to a magnetic field induces e.m.f. THE RDMUPS consist of grooved wheel which is connected to the ROTAR DISC .The grooved wheel is keyed to a shaft at one end and pulley is fixed to it at other end. Two more secondary pulleys are connected to the shaft pulley using pulley belt. The secondary
pulleys are fixed to dynamos which generates electrical power. When the disc is in motion it will make the grooved wheel set in motion resulting in motion of primary
pulley and with the help of belt drive the secondary pulleys will come in motion followed by rotation of DYNAMO and desired electrical power is generated which will be stored in battery of automobile used by the automobile as per need.
No. of Pages : 6 No. of Claims : 8
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19402
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821015387 A
(19) INDIA
(22) Date of filing of Application :24/04/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : INNOVATIVE ECO-FRIENDLY, SELF-MOUNTABLE DECORATIVE BOTTLE LAMPS AND
BOWL LAMPS
(51) International classification
:H01K
1/22
H01K
5/00
H05B
41/30
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)MRS. ARCHANA DIGAMBAR SURJUSE Address of Applicant :"SHIVALAYA" GAT NO. 1041,
NEWALE MALA, CHIKHALI, PUNE-411062,
MAHARASHTRA, INDIA. Maharashtra India
(72)Name of Inventor :
1)MRS. ARCHANA DIGAMBAR SURJUSE
(57) Abstract :
An Innovative eco-friendly, self-mountable Decorative Bottle I amps, utilization at indoor &outdoor locations, provides the very good
option for waste/used/new bottles management. It comprises with cutting, sticking, MPCB, Aluminum circuit LED lamps board,
adopter/holder, heat shrinkage sleeve, specially designed lid covered with dust proof material, decorative ribbon, lace. paintings,
lettering, name plates, optic fiber, stones, glass, wooden, plastic, fiber, etc. (metal/non-metal) materials. It is very useful to utilize at
any location as inside or outside the homes, hotels. malls, art galleries, entrance gates, hospitals, presentation/exhibition/meeting halls,
lobbies. advertisements, indications, symbols, etc. Also this is a very good kind of gift option at occasions like birthdays, festivals or
any ceremony. It is easy to direct Thus it promotes its usability through the safe/creative/decorative/pleasant solution at optimum
technology, no special skill need based. time, & energy/environment saving. It is easy to implement horizontally at urban as well as
rural areas due its specially designed working procedure & choice of materials. This is plug-in/plug-oui facilitate decorative lamp
suitable for existing electric holder/socket. Thus eliminates the mountings provisions as compared with existing lamps. Thus it creates
the obstacle free/ more vacant space in today"s tiny sized homes. It will provide ultimate, user-friendly, aesthetics, self-mountable,
energy efficient, cost effective, decorative, & safest solution for the waste/used/new bottles management, as on today there is no any
such kind of waste/used boules management provision. Thus its presence will spread happiness, pleasant, well-being, & heeling
atmosphere.
No. of Pages : 14 No. of Claims : 10
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19403
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821015390 A
(19) INDIA
(22) Date of filing of Application :24/04/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : ECO-FRIENDLY, HERBAL WASHING LIQUID FOR ALL TYPES OF UNTENSIL AND SIMILAR
ITEMMS
(51) International classification :A47L
17/04
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)SWAPNAJA NITIN MAHAJAN Address of Applicant :HOUSE NO. 62/4, DNYANESH
HOUSING SOC IETY, N.D.A. ROAD, NEAR INDIAN OIL
PETROL PUMP, WARJE MALWADI, PUNE-411058,
MAHARASHTRA, INDIA. Maharashtra India
2)ANKITA ASHOK NAGARKAR
3)REKHA RAMESH PATIL (72)Name of Inventor :
1)SWAPNAJA NITIN MAHAJAN
2)ANKITA ASHOK NAGARKAR
3)REKHA RAMESH PATIL
(57) Abstract :
The present innovation related to the eco-friendly, non-surfactant-based, non-foam-based, easily degradable, cleaning liquid for the
metal utensils, decorative items & ornaments. The said washing liquid is free from foaming activity, which also saves water cleaning
time. This liquid contains natural ingredients such as lemon, tamarind, big crystal salt/raw salt/sea salt, & vinegar (obtained from
natural sources). This combination of ingredients is easily soluble in water. All these ingredients are not harmful to the environment,
they actually helps environment in the degradation & cleaning process. Dish wash liquid is not harmful to the skin of user & maintains
smoothness of skin. The preparation of liquid is easy, cost effective, affordable, less skill, knowledge, habitual, & not requires any
special kind of or heavy instruments. Dish wash liquid prevents metal from rusting, frequent cleaning, maintains its shine, &
durability. Totally provides freedom to washing/cleaning items from scratch marks happens due to existing practices of rubbing as
comprising: only any smooth cloth is enough to clean eco-friendly, herbal dish wash liquid applied item. Dish wash liquid will reduce
the fatigue & time. Used natural fragrances will enhance the mood of user while performing the hectic task of cleaning on daily basis
mostly twice, thrice or more times. Mostly kitchen utensils, drinking water containers, decorative & items used for worshiping the god
or needed in spiritual activities are made from said metals. Appearance, shining of such items helps to increase positivity phycology,
health & overall well-being of personal, family, & social level.
No. of Pages : 14 No. of Claims : 10
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19404
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821015958 A
(19) INDIA
(22) Date of filing of Application :27/04/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : DESIGN OF ELECTRONIC TATTOO FOR PULSE RATE MEASUREMENT
(51) International classification :H03K
9/06
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)MRS SHILPA VIKAS SHINDE Address of Applicant :A-503, LOTUS VRINDAVAN, NEAR
WISDOM SCHOOL, VIKAS NAGAR, KIWALE, PUNE-412
101, MAHARASHTRA, INDIA. Maharashtra India
(72)Name of Inventor :
1)MRS SHILPA VIKAS SHINDE
2)DR S.S.SONAVANE
(57) Abstract :
Wireless Body Area Network (WBAN) is used extensively in the pervasive health monitoring and telemedicine to reduce the cost of
hospitalization and also to ensure comfort level of the patient. The WBAN is considered as special class of Wireless Sensor Networks
(WSN), however there are many differences and challenges involved in the WBAN. Unlike, WSN in WBAN there are limited number
of nodes which perform different operations. Compared to WSN, WBAN network has limited size and low energy requirements.
Often WBAN networks are used to transmit patient"s critical data. Furthermore, WBAN is used for shorter transmission range up to
10 m whereas WSN is used for higher range. In the recent years, Electronic Tattoos (ET); which are the new class of sensors are being
developed. There are multiple epidermal sensors are reported in literature . It is also observed that each sensor is unique in its
development, design and it has been manufactured by using varied technologies There have been various designs reported in the
literature , but none of the design is similar in its kind leading to the standardisation of the epidermal sensors. Also, there have been
many synonyms used for the similar technologies as reported in the review. These epidermal sensors output are measured by manual
technique or by using wireless technologies such as RFID, Zig-Bee and Bluetooth. These wireless modules are also used to transmit
the data wirelessly to the remote server or the mobile phone . But these are not recommended to use in WBAN. In addition, from the
review it is understood that developed epidermal sensors have not been tested in the network. They have been used as standalone
models with existing wireless technologies. We designed a unique skin-friendly Electronic Tattoo (ET) capable of measuring human
pulse rate accurately and transmits the same efficiently to the remote receiver. ET is designed according to WBAN or IEEE 802.15.6
standard, which is unique in its design. It is made using local available materials with cost effective manufacturing process. Also ET
will consume less power as compared to available pulse measurement devices in India. Designed Et is lighter in weight, user friendly
and aesthetically designed. An ET is cheaper as compared to other commercial available ETs. ET design can also be suitably modified
to measure other bio-logical signals.
No. of Pages : 15 No. of Claims : 7
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19405
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821016008 A
(19) INDIA
(22) Date of filing of Application :27/04/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : DESIGN OF AN ANKLE-FOOT EXOSKELETON FOR GAIT ASSISTANCE.
(51) International classification
:A61H
1/00
A61H
3/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)MR. PIYUSH A. SAWALE Address of Applicant :404, SANNIDHYA APARTMENT,
DR. AMBEDKAR CHOWK, SUBHASH TEKDI,
ULHASNAGAR-4, MAHARASHTRA-421 004, INDIA.
Maharashtra India
(72)Name of Inventor :
1)MR. PIYUSH A. SAWALE
2)DR. VIKAS V. SHINDE
(57) Abstract :
The Ankle-Foot exoskeleton is meant for Lower-limb Gait assistance. It is designed to comfortably allow appropriate lower limb
functional movements. It can be used to examine the human neuromuscular system and assist movement. This ankle-foot exoskeleton
is designed and tested by analyzing strong lightweight frames, comfortable points of contact with the leg, and base of the tarsal frame
is covered by an elastic element like Sorbothane for high shock absorption and improved torque control. A major stress has been
variably reduced since Sorbothane absorbs around 94.7% of shock impact. This device has low mass, and structurally compliant in
selected directions. This exoskeleton model is actuated by a simple Bowden cable, while the torque is controlled using a combination
of force supplement, spring damping for reverting the equivalent forces and smooth functioning. This Gait assistance is intended to
assist persons with a loss of function in one foot, which can come as a result of fractures, muscle fractures, stroke, spinal cord injury,
paralysis or a number of other factors which may cause hemiparesis. These performance compares favorably with various devices
along with human ankle musculature. It shows that the exoskeletons can be used to rapidly explore a wide range of control techniques
and robotic assistance paradigms as elements of versatile. Our results also provide insights into desirable properties of lower-limb
exoskeleton hardware.
No. of Pages : 13 No. of Claims : 8
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19406
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821015431 A
(19) INDIA
(22) Date of filing of Application :24/04/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : PROCESS OF FORMATION OF POLYHERBAL SHAMPOO BY MATURE DECOCTION HAVING
A FUNCTION OF PREVENTING HAIR LOSS AND STIMULATING HAIR GROWTH, AND MEHTOD OF PREPARATION OF
THEREOF.
(51) International classification :A61K
8/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)DR. RICHA KOTHARI Address of Applicant :DEPARTMENT OF CHEMISTRY,
ITM UNIVERSITY GWALIOR NH-75 JHANSI ROAD,
GWALIOR, M.P.- 474001, INDIA Madhya Pradesh India
(72)Name of Inventor :
1)DR. RICHA KOTHARI
(57) Abstract :
The present invention is to provide a novel and therapeutically effective polyherbal composition with proven pharmacological
activities and it"s processing for the preparation of polyherbal shampoo with synergistic effect. The present invention relates to the use
of a bio-availability and/or bio-efficacy and methods of their preparation which includes their isolation from natural source and
obtaining the final products in their chemically characterized form. Present invention provides a novel, therapeutically effective
polyherbal composition useful in the treatment of hair loss, anti fatigue, anti stress agent and provides vitality and energy. The novel
herbal composition comprises of Trachyspermum ammi leaves extracts, reetha pericarps , sheekakai fruits , amla fruits , fenugreek
seeds , flax seeds with acceptable additives and excipients. The natural shampoo is made using a herbal medicine mature decoction
which is obtained by putting herbs including thyme leaves, reetha, sheekakai, amla, fenugreek seeds, flex seeds , gelatin,lemin juice,
orange peels .sodium benzoate and levender essential oil in a maturing device, maturing the herbs in temperatures of 65 to 95° C.
depending on the herb for 3 to 21 days, then pouring distilled water or soft water, and decocting the matured herbs mixed with the
water in a maturing device, The invention aimed to formulate a pure polyherbal shampoo and to evaluate and compare its
physicochemical properties with the marketed synthetic and herbal shampoos. The polyherbal shampoo was formulated by adding the
extracts of thyme leaves in different proportions to a 10% aqueous gelatin solution. Small amount of lemon juice was added as a
preservative and pH was adjusted with 1 %citric acid. Several tests such as visual inspection, pH, wetting time, % of solid
contents,:foam volume and stability, surface tension, detergency, dirt dispersion etc, were performed to determine the physicochemical
properties of both prepared and marketed shampoos. The formulated herbal shampoo was also evaluated for conditioning performance
by administering a blind test to 20 student volunteers. The formulated herbal shampoo was clear and appealing. It showed good
cleansing and detergency, low surface tension, small bubble size and good foam stability after 5 min. The prepared shampoo and
commercial shampoos showed comparable results for % solid contents also.
No. of Pages : 17 No. of Claims : 10
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19407
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821015565 A
(19) INDIA
(22) Date of filing of Application :25/04/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : DISEASE PREDICTION SYSTEM USING NEURAL NETWORKS.
(51) International classification
:G06N
3/06
G06N
3/02
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)PROF. ISHWAR KALBANDI Address of Applicant :FLAT NO 11, 2ND FLOOR, DANGAT
CORNER KIWALE, PUNE-412101, MAHARASHTRA, INDIA.
Maharashtra India
2)MR. SOURAV MAJUMDER
3)MS. PRIYANKA KUMAVAT
4)MR. PRAKASH JHA
5)MRS. SHILPI ARORA
6)MRS. KETAKI BHOYAR
7)MRS. SHIVGANGA GAVHANE (72)Name of Inventor :
1)PROF. ISHWAR KALBANDI
2)MR. SOURAV MAJUMDER
3)MS. PRIYANKA KUMAVAT
4)MR. PRAKASH JHA
5)MRS. SHILPI ARORA
6)MRS. KETAKI BHOYAR
7)MRS. SHIVGANGA GAVHANE
(57) Abstract :
Online health-care is a web-based system which satisfies health seekers" needs by providing inference of the related disease this
reduces communication gap between health seeker and healthadvisor. In health-care accurately and efficiently inferring diseases is
nontrivial especially for community-based health services due to vocabulary gap, incomplete information, correlated medical
concepts, and limited high quality training samples. It is also very important to identify the discriminant features. Suppose more than
one disease having some symptoms then to give the correct inference of which possible disease the health seeker may suffer from
finding discriminant features is done using signature mining. Next step proposed is a novel deep learning scheme to infer the possible
diseases given the questions of health seekers. The proposed scheme is comprised of two key components. The first globally mines the
discriminate medical signatures from raw features. The second deems the raw features and their signatures as input nodes in one layer
and hidden nodes in the subsequent layer, respectively. Meanwhile, it learns the inter-relations between these two layers via pre-
training with pseudo labelled data. Following that, the hidden nodes serve as raw features for the more abstract signature mining. With
incremental and alternative repeating of these two components. Our contribution is to proposed a question answer system for
automatic disease inference. Tag have been generated from the user query to be matched with the dataset system provides inference of
having a particular disease based on tags. The proposed system identifies discriminant features for correct diagnosis of disease.
No. of Pages : 10 No. of Claims : 8
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19408
(12) PATENT APPLICATION PUBLICATION (21) Application No.201721016895 A
(19) INDIA
(22) Date of filing of Application :15/05/2017 (43) Publication Date : 25/05/2018
(54) Title of the invention : A PROCESS FOR PREPARING WINE FROM ORANGE FRUIT WITH AN OPTIMUM SUGARFREE
CONTENT
(51) International classification :A23F
3/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)DEEPAK NARMADA PRASAD YADAV Address of Applicant :NARMADA VILLA•
DHARAMPETH, LANE NO. 2, NAGPUR-440 010,
MAHARASHTRA, INDIA Maharashtra India
(72)Name of Inventor :
1)DEEPAK NARMADA PRASAD YADAV
(57) Abstract :
Disclosed is a process for preparing wine from orange fruit, said process comprise the steps of: obtaining orange fruits; ii) converting
the orange materials as obtained in step (i) into a mash by addition of 0.1-1% of jaggery and water; iii) obtaining a must from the mash
as formed in step (ii) by pressing off; iv) adding a fermenting agent to step (iii) and kept aside for fermentation at room temperature.
Figure 1
No. of Pages : 12 No. of Claims : 4
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19409
(12) PATENT APPLICATION PUBLICATION (21) Application No.201721041364 A
(19) INDIA
(22) Date of filing of Application :19/11/2017 (43) Publication Date : 25/05/2018
(54) Title of the invention : DEVICE FOR ARRESTING AIR POLLUTANTS
(51) International classification :A61F
5/48
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)TUGNAIT PRAGATI Address of Applicant :D-7/6, Salunke Vihar, Pune 411022
Maharashtra, India Maharashtra India
(72)Name of Inventor :
1)TUGNAIT PRAGATI
(57) Abstract :
A device (200) for arresting air pollutants is disclosed. The device comprises a body having two opposite openings defining an air
inlet (202) and an air outlet (209), a fan (222) provided proximal to the air outlet (209) for creating a partial vacuum in the region
between the fan (222) and the air inlet (202) causing the surrounding air to be pulled inside the body and flow towards the air outlet
(209), a plurality of pollutant arresters (212, 214, 218, 220) are arranged in the body between the air inlet (202) and the fan (222) for
purifying the air off more than one pollutants before exiting the air outlet (209). The device (200) can be used for indoor and outdoor
applications, and is highly efficient, environment-friendly, user-friendly and economical.
No. of Pages : 23 No. of Claims : 15
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19410
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821016467 A
(19) INDIA
(22) Date of filing of Application :01/05/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : METHOD FOR DETECTING AND THEREBY CURING RESPIRATORY AILMENTS USING
ADVANCED VOICE RECOGNITION AND MACHINE LEARNING
(51) International classification
:G10L
15/00
G06N
99/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Soubhik Das Address of Applicant :G-7, Samarth Park, Anandnagar, near
Santosh Hall, Sinhagad Road, Pune-51, Maharashtra, India
Maharashtra India
(72)Name of Inventor :
1)Soubhik Das
(57) Abstract :
The method of detecting and curing respiratory diseases involves capturing the dynamic voice of users. The recorded voice is
compared with the trained dataset of both voices with and without respiratory problems. Training here indicates that various past audio
samples of users have been to train the machine that makes it understand voices with and without respiratory problems. The dataset for
training uses both these types of voices. After training, there is a device provided which classifies new recorded voices into voices
with and without problems. In the last few years, lot of health problems have been created due to smaller symptoms like these. All
these are done to reduce the health severity occurring further. In addition, the cost associated with complex medical problems can also
be reduced by treating it in the earliest stage. With the given system, Machine Learning algorithms are applied here.
No. of Pages : 17 No. of Claims : 8
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19411
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821016579 A
(19) INDIA
(22) Date of filing of Application :02/05/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : PROCESS FOR PLEATING AND FOLDING DRUG COATED BALLOON
(51) International classification :A61K
31/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Meril Life Sciences Pvt Ltd Address of Applicant :Survey No. 135/139 Bilakhia House
Muktanand Marg, Chala, Vapi- 396191 Gujarat Gujarat India
(72)Name of Inventor :
1)KOTHWALA, Deveshkumar Mahendralal
2)VYAS, Rajnikant Gandalal
3)MINOCHA, Dr. Pramodkumar
(57) Abstract :
Process for pleating and folding drug coated balloon is disclosed. A balloon is inflated and an outer surface of the balloon is coated
with one or more layers of therapeutic agents and/or excipients. The drug coated balloon is subjected to pleating at a temperature from
the range of 25°-60°C and at a pressure from the range of 25-35 psi. The drug coated balloon is then subjected to folding in a
predefined direction at a pressure ranging from 80-100 psi and a dwell time ranging of 70-110 seconds. After the pleating and folding,
a protective sheath is mounted over the outer surface of the drug coated balloon to hold the pleats of the folded balloon. After
mounting, the heat setting process takes place at a temperature of 30-60°C which results in the balloon having a reduced profile
ranging from 60% to 70% of the initial balloon diameter. Fig. 3(f)
No. of Pages : 19 No. of Claims : 4
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19412
(12) PATENT APPLICATION PUBLICATION (21) Application No.201621037854 A
(19) INDIA
(22) Date of filing of Application :05/11/2016 (43) Publication Date : 25/05/2018
(54) Title of the invention : POLY-HERBAL COMPOSITION
(51) International classification :A61K
36/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)OSWAL, Rajesh Address of Applicant :846, Somwar Peth, Talegaon Dabhade
Pune- 410506, Maharashtra, India Maharashtra India
2)BHANDARI, Rahul
3)GUNDECHA, Ashish
4)PATIL, Kamalakar (72)Name of Inventor :
1)OSWAL, Rajesh
2)BHANDARI, Rahul
3)GUNDECHA, Ashish
4)PATIL, Kamalakar
(57) Abstract :
The present disclosure relates to a poly-herbal composition and a process for preparing the same. The poly-herbal composition
comprises an extract of Emblica officinalis, aqueous saccharide base, clarified butter, at least one gelling agent, at least one stabilizer,
and at least one pharmaceutically acceptable excipient. The poly-herbal composition of the present disclosure can be used as an
immunity booster.
No. of Pages : 24 No. of Claims : 10
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19413
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821017055 A
(19) INDIA
(22) Date of filing of Application :07/05/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : ENERGY SAVING MULTILAYER REMOVABLE THERMAL INSULATION
JACKET/CONER/SLEEVE
(51) International classification :H01B
12/14
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)DR. SANDIPKUMAR BALASAHEB SONAWANE Address of Applicant :B 14, KARBHARI COOPERATIVE
HOUSING SOCIETY, GAYATRI NAGAR, RTO CORNER,
DINDORI ROAD, NASHIK-422 004, MAHARASHTRA,
INDIA. Maharashtra India
2)C.A. ANAND KEDRANATH BANG (72)Name of Inventor :
1)SANDIPKUMAR BALASAHEB SONAWANE
2)C.A. ANAND KEDRANATH BANG
(57) Abstract :
Multilayer removable thermal insulation jacket/cover/sleeve is developed for reduction of heat loss from hot fluid to cold fluid (take
place due to temperature difference) in the present invention. It has been observed that thermal insulation jacket/cover/sleeve of
desired material composition and thickness when properly installed on the flanges/valves, furnaces, steam pipe, mould cavities and
other fittings of steam distribution line offer significant reduction in fuel consumption by reducing heat loss from steam/gas/liquid to
surrounding fluid. Single layer of insulation material is not sufficient to get all properties (insulating properties, flame resistance,
water penetration resistance, tensile strength and chemical resistance) in the jacket/cover/sleeve. Also it is necessary to remove and
reinstall jacket/cover/sleeve in industries/establishments at the time of maintenance. In our invention, the layers of different insulating
materials (fibre glass, ceramic blanket and silicon fabric) are scientifically arranged and stitched using specialized thread in order to
reduce heat loss from steam/gas/liquid to the surrounding environment. Also, hooks/belts are provided on the jacket/cover/sleeve for
easy removal and reinstallation of jacket during maintenance work. Our invented jacket/cover/sleeve has good insulation properties,
excellent flame and water penetration resistance, good tensile strength and chemical resistance. It has been observed that upto 90%
heat loss has been reduced from steam to surrounding air using our energy saving multilayer removable insulation jacket/cover/sleeve.
Reduction in heat loss is equivalent to reduction in fuel consumption. Payback analysis is carried out using cost saving (due to fuel
saving) and cost of jacket/cover/sleeve. Payback period is actually measured approximately as one year. Ambient temperature plus
maximum 10°C temperature is achieved on outer surface of jacket/cover/sleeve exposed to surrounding environment; As a result,
worker safety and efficiency have been increased drastically in the process industries/establishments. In our invention, we have
increased the life of jacket/cover/sleeve upto 10 years by incorporated all desirable properties in the invented jacket/cover/sleeve.
Temperature control on a process is also achieved using jacket/cover/sleeve. In conclusion, multilayer removable thermal insulation
jacket is energy saving, efficient, safe, techno-economical viable product for all process industries/establishments.
No. of Pages : 10 No. of Claims : 9
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19414
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821017066 A
(19) INDIA
(22) Date of filing of Application :07/05/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : "SYNTHESIS AND USE OF NOVEL FLAVONOL DERIVATIVES AGAINST LEUKEMIA".
(51) International classification :A61K
31/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)DR. S.J.WADHER Address of Applicant :SCHOOL OF PHAMACY, SWAMI
RAMANAND TEERTH MARATHWADA UNIVERSITY,
NANDED, MAHARASHTRA, 431606 INDIA. Maharashtra
India
(72)Name of Inventor :
1)DR. S.J.WADHER
2)PALLAVI.A.KAMBLE
(57) Abstract :
ABSTRACT The present invention relates to novel flavonol derivative and process of preparation thereof. The present invention also
relates to activity of novel flavonol compound in acute myeloid leukemia. From the results, the compound D6 is found to be more
potent with the IC50of 0.0062μM/ml. 6.25 μg/ml 12.5 μg/ml 25 μg/ml 50 μg/ml 100μg/ml Fig.l Effect of Compound D6 on HL60 cell
lines at different concentrations
No. of Pages : 11 No. of Claims : 7
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19415
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821016615 A
(19) INDIA
(22) Date of filing of Application :02/05/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : A PROCESS FOR PREPARATION OF FLAVORED JAGGERY
(51) International classification
:A23L
1/30
A23L
2/02
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Gurlife Aagrotech LLP Address of Applicant :202, B Wing, Bhanukant Complex,
Junction of western express high way, Goregaon (E), Mumbai,
Maharashtra, India Maharashtra India
(72)Name of Inventor :
1)Mr. Dhananjay Digambar Pande
2)Mr. Shankar Madhav Phadke
(57) Abstract :
The present invention relates to the field of food technology and particularly to a process for producing flavored jaggery. In this
process, premix of emulsifying agent and oil based essence is added at 65-75°C to pH adjusted slurry of sugarcane juice. The mixture
obtained is heated to 100-120°C to obtain the flavored jaggery. The various forms in which the flavored jaggery is manufactured are
paste, solid powder/ granules and liquid jaggery. The jaggery obtained by this process has low moisture absorbing capacity and
enhanced keeping quality. Ease of transport and handling at both industrial levels and consumer level is achieved. It has enhanced
solubility and low microbial load.
No. of Pages : 10 No. of Claims : 7
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19416
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821016628 A
(19) INDIA
(22) Date of filing of Application :02/05/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : A PROCESS FOR PREPARATION OF FLAVOR COATED JAGGERY
(51) International classification
:A23L
1/30
A23L
2/02
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Gurlife Aagrotech LLP Address of Applicant :202, B Wing, Bhanukant Complex,
Junction of western express high way, Goregaon (E), Mumbai,
Maharashtra, India. Maharashtra India
(72)Name of Inventor :
1)Mr. Dhananjay Digambar Pande
2)Mr. Shankar Madhav Phadke
(57) Abstract :
The present invention relates to the field of food technology and particularly to a process for producing flavored jaggery in the form of
novel 360° coated jaggery particles and the process for preparing the said coated jaggery particles. The Jaggery obtained by this
process has low moisture content and low moisture absorbing capacity. Hence, transport and ease of handling at both industrial levels
and consumer level is achieved. It has enhanced solubility, absorbability, low microbial load and flavor retention.
No. of Pages : 10 No. of Claims : 6
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19417
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821016669 A
(19) INDIA
(22) Date of filing of Application :03/05/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : "UNMANNED AERIAL AIR FILTRATION AND MONITORING VEHICLE"
(51) International classification
:B60V
1/00
B61J
1/06
B03C
3/155
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)MR. JAYESH PATIL Address of Applicant :SURVEY NO. 1317, KRUSHNAI
HSG. SOC. CHIKHALI, PUNE-412 114, MAHARASHTRA,
INDIA. Maharashtra India
2)MR. CLEON FERNANDES
3)MR. RISHAL NAVINDGIKAR (72)Name of Inventor :
1)MR. JAYESH PATIL
2)MR. CLEON FERNANDES
3)MR. RISHAL NAVINDGIKAR
(57) Abstract :
A rising population, industrial revolution and with the rise in transportation media, our world is facing the problem of air pollution. As
a result, millions of deaths are caused due to this harmful and hazardous act of air pollution. Right from young ones to the old people
are affected due to this phenomenon. At present the purpose of applying and developing an air pollution control technology is to meet
ambient air quality standards and other source related regulations. A pollution control technology can only be applied to a controllable
source. Hypothetically, it will be difficult to think of controlling emissions from a volcano. The cost of removing a pollutant from a
source generally increases exponentially with the percentage of control. However, the relationship will change if it is possible to
recover the air pollutants for some economic purposes. Thus, application of control technology requires knowledge of source,
effluents from the source, air pollution regulations. Sometimes it is possible to develop a successful air pollution controlling device
which will lead to the problem solution for collecting such effluent from air pollutants. In order to overcome this, we came up with an
innovative idea of mounting an air filter on the housing of the quadcopter or multi-copter and using the aerial pathway, as the UAV
flies over the area it will help up to collect all the particulate matter as well as hazardous air pollutants from the air, thus preventing air
pollution up some constrain and help in eradicating the destruction of ozone layer and decreasing the pollution level in the atmosphere
thereby decreasing the greenhouse gas effects. The filter will collect all the particulate matter in two steps. The quadcopter will
implement the use of a wireless module in order to communicate with a base remote controller. Now, the main purpose of this project
is to carry out two important tasks, firstly, monitoring the amount of air pollution level present in different regions with the help of
appropriate sensors. And secondly, filtering out the waste air pollutant from the atmosphere with the help of the filtrate material which
will be directly installed inside the chasse of the drone.
No. of Pages : 14 No. of Claims : 8
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19418
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821017102 A
(19) INDIA
(22) Date of filing of Application :07/05/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : SYSTEM AND METHOD FOR RECOMMENDATION OF A PRODUCT
(51) International classification
:G06Q
30/00
G06F
17/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Iseby Solutions LLP Address of Applicant :Flat No 7, Plot “ 23, Sonali Apartments,
Mayur colony, Kothrud, Pune- 411038, Maharashtra, India
Maharashtra India
(72)Name of Inventor :
1)Adhokshaj Adya
(57) Abstract :
The present disclosure describes system and method for recommendation of a product. The system 101 is configured for receiving
product information. The product information comprises data values for predefined parameters. The system 101 is configured for
processing the product information and checking availability of the product 104 based on the data values for predefined parameters.
The system 101 is configured for identifying and recommending a similar product based on the non-availability of the product and the
data values for predefined parameters. The system 101 is configured for transmitting the product information of the similar product to
the user device 103, thereby recommending the similar product. The similar product is latest/upgraded version of the product 104.
No. of Pages : 24 No. of Claims : 15
-
The Patent Office Journal No. 21/2018 Dated 25/05/2018 19419
(12) PATENT APPLICATION PUBLICATION (21) Application No.201821017114 A
(19) INDIA
(22) Date of filing of Application :07/05/2018 (43) Publication Date : 25/05/2018
(54) Title of the invention : SYSTEM AND METHOD OF STERILIZATION AND PACKAGING OF A MEDICAL DEVICE
(51) International classification
:A61B
50/00
A61L
2/00
A61M
5/00
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)Meril Life Sciences Pvt Ltd Address of Applicant :Survey No. 135/139, Bilakhia House
Muktanand Marg, Chala, Vapi, Gujarat - 396191 Gujarat India
(72)Name of Inventor :
1)KOTHWALA, Deveshkumar Mahendralal
2)VYAS, Rajnikant Gandalal
3)MINOCHA, Dr. Pramod Kumar
(57) Abstract :
The present invention discloses a system and a method of integrated sterilization and packaging of a medical device. The present
invention discloses a system for simultaneous sterilization of an assembly of a protective package containing a medical device. The
protective package includes without limitation a fluid container, a tray and a pouch.