instructions for the update · 4. the update process begins « 5. the update is now completed,...
TRANSCRIPT
Notice d’installation de la Mise à jour
Instructions for the update
Français
English
Etape 1: Préparation
ATTENTION! Avant de commencer la mise à jour de votre téléphone, veillez à sauvegarder toutes vos données personnelles ( Vos contacts sur votre carte SIM ou votre compte Google et vos photos, vidéos et musiques sur votre PC ou votre carte SD). La mise à jour effacera toutes les données et réinitialiser votre téléphone.
Câble micro-USB (fourni dans la boîte)
Sortie USB a insérer dans le PC
Sortie USB a insérer dans le téléphone
Étape 2: Lancement du logiciel de mise à jour
1. Télécharger la mise à jour sur : http://fr.wikomobile.com/maj.php
2. Extraire le logiciel exécutable comme sur l’image ci-dessous :
3. Exécuter le logiciel d’installation en tant qu’administrateur.
Cliquer sur « Next » pour continuer.
Veuillez cocher la case « Create a deskop icon » afin de créer un raccourci sur le bureau.
4. Cliquez sur « OK » pour lancer le redémarrage en Mode Test de votre PC
Pour Windows 7 seulement.Pour Windows 8/10, si nécessaire : - Désactiver la signature des pilotes
- Activer/Désactiver Pare-Feu
Étape 3 : Installation de la mise à jour
Kitkat/Lollipop :(Téléphone Eteint) Appuyer sur Volume+ et Volume-, connecter le sur le PC via le câble USB, Maintenez les boutons jusqu'à ce que le téléchargement commence.
Veuillez attendre quelques
minutes que les pilotes
s’installent correctement,
avant de cliquer sur le bouton
‘Download’.
Vous pouvez suivre l’état d’avancement de l’installation des pilotes
en ouvrant la barre des tâches (petite flèche en bas à droite de votre
écran).
3. Cliquer ensuite sur le bouton ‘Download’.
4. Le processus de mise à jour commence…
5. La mise à jour est à présent terminée, veuillez débrancher le
téléphone de votre PC et l’allumer.
Étape 4 : Vérification de la mise à jour
Afin de vérifier si la mise à jour s’est bien déroulée :
1. Veuillez-vous rendre sur le clavier numérique de votre
téléphone.
2. Composer le code suivant : *#*#563412#*#*
3. Vérifier si vous êtes bien sur la dernière version (voir la version du logiciel
d’installation). Dans le menu « Wiko build version »
Félicitations! Vous venez de terminer la mise à jour.
Si vous rencontrez des difficultés lors de la mise à jour, merci de contacter le
service technique et prendre directement rendez-vous avec nous en vous
rendant sur : http://fr.wikomobile.com/maj.php, puis choisissez le modèle de
votre téléphone.
Etape 5: Désactiver le Mode Test
Si vous souhaitez désactiver le mode test sur votre PC :
Veuillez-vous rendre dans le menu Démarrer
Puis allez dans : Rechercher les programmes et fichiers
Ouvrir cmd en choisissant Exécuter en tant qu’administrateur :
Et entrer les commandes suivantes:
bcdedit.exe -set loadoptions DENABLE_INTEGRITY_CHECKS (appuyez sur Entrée pour
valider) bcdedit.exe -set TESTSIGNING OFF (appuyez sur Entrée pour valider)
Redémarrer le PC et Windows va se lancer normalement. Ou suivez les étapes
indiquées dans le lien ci-dessous :
https://support.microsoft.com/en-us/kb/2421786/fr
(Pour Windows 7 seulement)
Step 1 : Preparation
CAUTION! Before you begin the update of your phone, be sure to back up all your personal data (Save all your contacts in your SIM or your Google Account and your pictures, videos and musics on your PC or your SD Card)
Micro USB Cable (supplie in the box)
USB Output Part To connect to PC
Micro USB Output PartTo connect to the phone
Step 2: Launching the update software
1. Download the update at: http:/ / fr .wikomobile.com/maj.php
2. Extract the installation file on your desktop, as shown on the picture below:
3. Run the installation software as administrator.
Click on next to continue:
4. Please tick the box « Create a deskop icon » in order to create a desktop
shortcut.
4. Click on “OK” to start rebooting your computer in test mode
For Windows 7 only.For Windows 8/10, if necessary:
- Disable driver signing- Turn Windows Firewall on or off
Step 3: Installing the update
1. Launch the update software by selecting Run as Administrator.
2. Kitkat > Lollipop : (Phone OFF) Please press Volume +, Volume -, Power key
at the same time for three seconds, then your connect your telephone to PC
via USB cable.
Lollipop > Kitkat or Lollipop : (Phone OFF) Press Volume + and Volume - at the same
time during three seconds and connect your telephone to PC via USB cable.
Lollipop : (phone powered off) press on Volume up and volume down, thenconnect the phone on the computer via USB cable, hold the two button until the sofware start downloading
Please wait a few minutes
that the drivers install
correctly, before clicking on
the ‘Download’ button.
You can check the progress of the drivers’ installation by opening the
taskbar (little arrow at the bottom right of your screen).
3. Then click on the ‘Download’ button (for Kitkat / Lollipop).
4. The update process begins …
5. The update is now completed, disconnect the phone from your PC
and turn on your phone.
Step 4: Verifying the update
In order to check if the update was successful:
1. Please access the numeric keypad on your phone.
2. Enter the following : *#*#563412#*#*
3. Verify that you have the latest version (see the software installation
version) in the menu “Wiko build version”.
Congratulations! You have completed the update
Step 5: Disabling Test Mode
If you want to disable the test mode on your PC:
Please go to the Start Menu:
Then go to: Search programs and files
Open cmd with Admin rights:
And enter the following commands
bcdedit.exe –set loadoptions DENABLE_INTEGRITY_CHECKS (press Enter
to validate) bcdedit.exe –set TESTSIGNING OFF (press Enter to validate)
Reboot the PC and Windows will be loaded normally.
Or follow the instructions in the link below: https://support.microsoft.com/en-us/kb/2509241
(For Windows 7 Only)