projet bibliographique biopolymères & actiflo ® turbomix
Post on 23-Feb-2016
34 Views
Preview:
DESCRIPTION
TRANSCRIPT
PROJET BIBLIOGRAPHIQUE
Biopolymères & Actiflo®Turbomix
Sommaire
Introduction
Actiflo®
Turbomix
Réactifs
Conclusion
Types & Choix
InnovationsAxe de développement
Introduction
Actiflo®Turbomix – Floc lesté
Microsable
Polymère Floc lesté
Floc lesté
Colloïdes
-
- -
-
-
Coagulant
+
+
Microflocs
--
-+ +
+-
--
-
Densité élevée2700 kg/m3
Vitesse de décantation 80 m/h
(concurrence 20 m/h)
Actiflo®Turbomix - Agitateur
Floc lestéTurbomix
Agitation forte
Agitation modérée
Actiflo®Turbomix - Développement
Développement Floculant à la base naturelle
Bassin de décantation incliné
Actiflo® Turbomix : meilleure agitation
Actiflo® : floc lesté, module lamellaire
Réactifs - Résumé
Polymère synthétique
Biopolymère sans modification
+ Efficacité élevée- Coût élevé- Toxicité à long terme+ Coût faible+ Biodégradable- Extraction difficile- Efficacité moyenne
Biopolymère avec modification+ Coût faible
+ Biodégradable- Technologie de production- Efficacité
Sel coagulant+ Efficacité élevée- Modification de pH - Coût élevé- Volume de boue produite grand
Réactifs - Choix
48 publications
✎Nature de la source ✎Méthode d’extraction✎Concentration optimale✎pH, turbidité, TAC, COT
avec modification
sans modification
✎Peu efficace pour turbidité faible
✎Concentration optimale élevée
cationique+ anionique-✎Toxicité
non ionique✎Solubilité
amidon/tanninschitosane
Réactifs – Proposition
5 5643 74
Réactifs – Amidon anionique
Plusieurs sources : les maïs, les pommes de terre, les cassaves/tapiocas, les froments et les fèves
Disponibilité de techniques commerciales pour greffer les groupes fonctionnels sur la chaîne de l’amidon
Très peu de données dans le traitement de l’eau potable
Complexité au niveau des fournisseurs
Modification possible de la structure : ramifiée/linéaire
Conclusion
Perspective
Qualité de bouesFormation de THM
Indicateur
pH, TOC, NTU, TACAnalyse du polymère
Paramètres
PolymèreDébit
Agitation
ExploitationModélisation
Présenté par H.PhamENSCR/EI3/EPA12/02/2010
1. Gunaratna, K.R., et al., Screening and evaluation of natural coagulants for water treatment. Water Science & Technology: Water Supply, 2007. Vol. 7: p. 19-25.2. Mahvi, A.H. and M. Razavi, Application of Polyelectrolyte in Turbidity Removal from Surface Water American Journal of Applied Sciences, 2005. Vol. 2: p. 397-399.3. Kurenkov, V.F., H.-G. Hartan, and F.I. Lobanov, Application or polyacrylamide flocculants for water treatment. chem.kstu.ru, 2002.4. Sharma, B.R., N.C. Dhuldhoya, and U.C. Merchant, Flocculants—an Ecofriendly Approach. Journal of Polymers and the Environment, 2006. Vol. 14: p. 195–202.5. Srinivasan, R., Simple, efficient and eco-friendly solutions for water and wastewater treatment.
www.sigmaxi.org, 2008.
……………………………………………………………………………………………………………………………..
43. Young, J.C. and F.G. Edwards, Factors Affecting Ballasted Flocculation Reactions. Water Environment Research, 2003. Vol. 75: p. 263-272 44. David, G.S., Of: Factors Affecting Ballasted Flocculation Reactions, James C. Young and Findlay G. Edwards, 75, 263 (2003) /Closure Water Environment Research, 2004. Vol. Volume 76: p. 263.45. Levecq, C., et al., A new design of flocculation tank: the Turbomix applied to weighted flocculation. Water Science & Technology, 2007. Vol. 56: p. 141–149.46. Desjardins, C., B. Koudjonou, and R. Desjardins, Laboratory study of ballasted flocculation. Water Research, 2002. Vol. 36: p. 744–754.47. Blumenschein, C.D., E. Latker, and K. Banerjee, Sand Ballasted High Rate Clarification Process for Treatment of Process Water. www.krugerusa.com, 2006.48. Sauvignet, P., et al., PROCEDE ET INSTALLATION DE TRAITEMENT D'EAU PAR FLOCULATION LESTEE ET DECANTATION. Brevet, 2006. Vol. N° de publication 2910822.
top related