pcz 1510152 ce
DESCRIPTION
PCZ1510152CE.pdfTRANSCRIPT
-
Service Manual OLED TV
TX-65CZ950E TX-65CZW954 TX-65CZR950 TX-65CZC954
EL1 Chassis
Panasonic Corporation 2015. Unauthorized copying and distribution is a violation of law.
ORDER No. PCZ1510152CE
There are special components used in this equipment which are important for safety. These parts are marked in the Schematic Diagrams, Circuit Board Diagrams, Explorer Views and Replacement Parts List. It is essential that these critical parts should be replaced with manufacturers specified parts to prevent shock, fire or other hazards. Do not modify the original design without permission of manufacturer.
IMPORTANT SAFETY NOTICE
This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potencial dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products deal within this service information by anyone else could result in serious injury or death.
Warning
-
Contents SAFETY PRECAUTIONS ........................................... 3
GENERAL GUIDE LINES ...................................... 3
TOUCH CURRENT CHECK ............................... 3
PREVENTION OF ELECTROSTATIC DISCHARGE
(ESD) TO ELECTROSTATICALLY SENSITIVE (ES)
DEVICES .................................................................... 4
ABOUT LEAD FREE SOLDER (PBF) ......................... 5
SUGGESTED PB FREE SOLDER ........................ 5
SERVICE NAVIGATION ............................................. 6
CHASSIS BOARD LAYOUT .................................. 6
SERVICE HINTS ........................................................ 7
APPLICABLE SIGNALS ............................................ 11
SPECIFICATIONS .................................................... 12
TECHNICAL DESCRIPTION ................................ .14
SPECIFICATION OF KEY FOR DTCP-IP,
C2MOD, CI PLUS, DIMORA, HDCP2.2,
NETFLIX, WIDEVINE, FREETIME ....................... 14
GENERAL INFORMATION ................................. 14
REPLACEMENT OF ICS ..................................... 14
MODEL AND KEYS ............................................ 14
USB HDD RECORDING ..................................... 14
SCHEMATIC DIAGRAMS NOTE .............................. 98
A-BOARD (1 OF 44) SCHEMATIC DIAGRAM .......... 99
FR-BOARD (1 OF 12) SCHEMATIC DIAGRAM ..... 143
GK-BOARD SCHEMATIC DIAGRAM .................... 155
PN-BOARD SCHEMATIC DIAGRAM ..................... 156
K-BOARD SCHEMATIC DIAGRAM ........................ 157
S-BOARD SCHEMATIC DIAGRAM ........................ 158
CONDUCTOR VIEWS ............................................ 159
SERVICE PORT (M3 MINI JACK) SPEC. ................. 15
SETTING INSPECTION ............................................ 18
CS MAINTENANCE MENU ...................................... 19
SYSTEM INFORMATION ......................................... 20
HOTEL MODE .......................................................... 21
DATA COPY BY USB MEMORY .............................. 22
DATA COPY FROM TV SET TO USB MEMORY ..... 23
DATA COPY FROM USB MEMORY TO TV SET ..... 24
OPTION BYTES DESCRIPTION .............................. 25
SELF CHECK ........................................................... 26
POWER LED BLINKING TIMING CHART ................ 27
OLED PANEL TEST MODE ...................................... 28
WIRING DIAGRAM ................................................... 29
BLOCK DIAGRAM (1 OF 3) ...................................... 30
PARTS LOCATION ................................................... 34
LOCATION OF LEAD WIRING ................................. 38
PACKING TRUCTURE ............................................. 39
REPLACEMENT PARTS LIST NOTE ....................... 40
REPLACEMENT PARTS LIST .................................. 41
2
-
Safety PrecautionsGeneral Guide Lines
1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit.
2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.
3. After servicing, make the following touch current checks to prevent the customer from being exposed to shock hazards. 4. Always ensure cover label TBM4GU113 is correctly replaced before returning to customer (see Fig.1). Touch-Current Check 1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check. 2. Connect a measuring network for touch currents between each exposed metallic part on the set and a good earth
ground such as a water pipe, as shown in Fig. 2. 3. Use Leakage Current Tester (Simpson 228 or equivalent) to measure the potential across the measuring network. 4. Check each exposed metallic part, and measure the voltage at each point. 5. Reserve the AC plug in the AC outlet and repeat each of the above measure. 6. The potential at any point (TOUCH CURRENT) expressed as voltage U1 and U2, does not exceed the following values:
For a. c.: U1 = 35 V (peak) and U2 = 0.35 V (peak); For d. c.: U1 = 1.0 V, Note: The limit value of U2 = 0.35 V (peak) for a. c. and U1 = 1.0 V for d. c. correspond to the values 0.7 mA (peak) a. c. and 2.0 mA d. c. The limit value U1 = 35 V (peak) for a. c. correspond to the value 70 mA (peak) a. c. for frequencies greater than 100 kHz.
7. In case a measurement is out of the limits specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to the customer.
Fig. 2
TO APPLIANCES EXPOSED METAL PARTS
Resistance values in ohms ()
V R0=500
RS=1500 CS=0.22F
10k
0.022F
COLD WATER PIPE (EARTH GROUND)
V: Voltmeter or oscilloscope (r.m.s. or peak reading)
Measuring network for TOUCH CURRENTS
Input resistance: 1M Input capacitance:200pF Frequency range: 15Hz to 1MHz and d.c.respectively
NOTE Appropriate measures should be taken to obtain the correct value in case of non-sinusoidal waveforms
U2 (V) U1 (V)
Fig. 1
3
-
Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on
your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge build up or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices. 4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static (ESD
protected)" can generate electrical charge sufficient to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices. 6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it.
(Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material).
7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. Caution Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the
brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient to damage an ES device).
There are special components used in this equipment which are important for safety. These parts are marked by in schematic diagrams, exploded views and replacement parts list. It is essential that these critical parts should be replaced with manufacturers specified parts to prevent shock, fire, or other hazards. Do not modify the original design without permission of manufacturer.
IMPORTANT SAFETY NOTICE
4
-
About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available. This model uses Pb Free solder in its manufacture due to environmental conservation issues. For service and repair work, wed suggest the use of Pb free solder as well, although Pb solder may be used. PCBs manufactured using lead free solder will have the PbF within a leaf Symbol stamped on the back of PCB. Caution
Pb free solder has a higher melting point than standard solder. Typically the melting point is 50 ~ 70 F (30~40C) higher. Please use a high temperature soldering iron and set it to 700 20 F (370 10 C).
Pb free solder will tend to splash when heated too high (about 1100 F or 600 C). If you must use Pb solder, please completely remove all of the Pb free solder on the pins or solder area before applying Pb solder. If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.
After applying PbF solder to double layered boards, please check the component side for excess solder which may flow onto the opposite side. (see Fig.3)
Suggested Pb free solder There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu (tin, silver, copper) solder. However, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also be used. (see Fig.4)
Fig.3
Fig.4
5
-
Service Navigation Chassis Board Layout
Board Name FunctionA-Board AV(COMPONENT/VIDEO),AV(SCART), HDMI1-4, USB1-3, WI-FI, BLUETOOTH, Digital
Audio Out,TUNER A/DVB-T/T2/C(Sx2), DVB-T2/T/C/S2/S Dem 2x, CI slot 2x, Ethernet, Headphone jack, SERVICE PORT - RS-232C, Peaks IC_Pro5 + NAND FLASH eMMC,IC
EASTER MTK + NAND FLASH eMMC, DDR3 SDRAM FR-Board GCX2 2x, AUDIO AMP, SPEAKER+WOOFER+TWEETER output P1-Board* Power Supply P2-Board* Power Supply K-Board Remote Receiver, Power and Timer LED, C.A.T.S
PN-Board Temperature Sensor GK-Board Control Buttons S-Board Main Power Switch
A-Board
P1-Board*
FR-Board P2-Board*
GK-Board
S-Board
PN-Board
K-Board
Note: *Caution when replacing P1/P2-Board. Primary circuit exists on P1 and P2 board. The circuit is identified as HOT on PCB. Use extreme care to prevent accidental shock when servicing.
6
-
Service Hints Caution during servicing (Handling the TV set) At least two people are required to move the OLED TV set. 1. Dont handle the side of OLED Panel (Fig. 5) Due to the large screen and thin design, OLED Panel is weaker than other present TV set. If handle with both side, OLED panel will be twisted and damaged. 2. Dont move the TV set without Back Cover. Use handle hole of Back Cover to move the TV set.
How to Handle Use handle hole of Back Cover and support at top of the TV set in the area which can be handle. (Fig. 6) Put the Back Cover before moving TV set. If the Back Cover was removed for servicing, put it again for moving. At least 4 screws should be put for temporary fixing the Back Cover. (Fig.7)
Reinforced by Metal Plate
Area which can be handle
Area which can be handle
Fig.5
Area which should not be handle (Both side)
Support at top Of the screen
Use handle hole
Fig.6
Fig.7
Screw for temporary fixing
7
-
Handling the OLED Panel At last two people are required to move the OLED Panel. Due to the large screen and thin design OLED Panel is weaker than other present TV set. If handle with both side OLED panel will be twisted and damaged. 1. Transport only in upright position. Transporting the OLED Panel facing upwards or downwards may cause damage to the internal circuitry. Handle the metal plate portion at top and bottom side of the panel. (Picture 8) (Use handle hole of Back Cover when move the spare parts of OLED Panel.) 2. When laying the OLED panel Handle the metal plate portion at top and bottom side of the panel. (Picture 9) 3.How to lay the front side of OLED Panel on the table Due to the curved design (5000R) is introduced for this OLED Panel if laying the OLED panel on the flat table directly OLED panel will be twisted and damaged due to weight itself. (see Fig.10) CUSHION-FRONT (TPD0E51001) is necessary for laying the OLED Panel on the table.
Fig.10
NG
Fig.8
Fig.9
CUSHION-FRONT (TPD0E51001)
OK
8
-
How to remove the pedestal assembly Prepare a CUSHION-FRONT (TPD0E51001) (see Fig.11) which included as one of packing for TV set or spare part of OLED Panel on the flat surface. Using CUSHION-FRONT is for safely service to avoid transformation or damage of OLED panel.
Use handle hole of Back Cover and support at top of the TV set in the area which can be handle and lay the front side of OLED TV to prepared cushion front. (see Fig.12) Remove the 8 fixing screws and pull out pedestal assembly (see Fig.13)
Fig.11
Fig.12
Fig.13
(3)
SCREWS (3) XYN4+F14NK/8pcs/
(3) (3)(3)
(3)(3)
(3)
(3)
9
-
How to remove the backcover Remove the 1 fixing screw and AC Cord cover. (see Fig.14) Remove the 32 fixing screw and Back Cover. (see Fig.15)
SCREWS(1) THTD037J /1pcs/
Fig.14
(1)
SCREWS (1) THTD037J /6pcs/ (2) THEC1509 /18pcs/ (3) XYN4+F14NK /8pcs/
(2) (2) (2) (2)
(2)
(2)(2)
(2) (2)
(2)
(2)(2)
(2)
(2)
(2)
(1)
(1) (1)
(1)
(1)
(2)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
Fig.15
(2) (2)
(1)
(3)
10
-
Applicable Signals Note:
Signals other than above may not be displayed properly. The above signals are reformatted for optimal viewing on your display.
Signal name COMPONENT HDMI
525 (480) / 60i,60p * * 625 (576) / 50i, 50p * * 750 (720) / 60p, 50p * * 1,125 (1,080) / 60i, 50i * * 1,125 (1,080) / 60p,50p, 24p * 3,840 x 2,160 / 60p, 50p, 30p, 25p, 24p * 4,096 x 2,160 / 60p, 50p, 30p, 25p, 24p *
Component (Y, Pb, Pr) (from AV2 terminal), HDMI
11
-
Specifications
Power Source: 220-240V AC, 50 / 60Hz
Rated Power Consumption: 390W Stand-by Power Consumption: 0.30W Aerial Impedance: 75 unbalanced, Coaxial Type Receiving System: CZ950E, CZW954, CZC954 DVB-S/S2 Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) Receiver frequency range - 950 MHz to 2 150 MHz DiSEqC Version 1.0 DVB-T/T2 Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) DVB-C Digital cable services (MPEG2 and MPEG4-AVC(H.264)) PAL I/H, B/G, SECAM B/G, L/L VHF E2-E12 VHF H1-H2 (ITALY) VHF A-H (ITALY) UHF E21-E69 CATV (S01-S05) CATV S1-S10(M1-M10) CATV S11-S20 (U1-U10) CATV S21-S41 (HYPERBAND) PAL D/K, SECAM D/K VHF R1-R2 VHF R3-R5 VHF R6-R12 UHF E21-E69 PAL 525/60 (AV only) M.NTSC (AV only) NTSC (AV only) Receiving System: CZR950 DVB-S/S2 Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) Receiver frequency range - 950 MHz to 2 150 MHz DiSEqC Version 1.0 DVB-T/T2 Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) DVB-C Digital cable services (MPEG2 and MPEG4-AVC(H.264)) PAL D/K, SECAM D/K VHF R1-R2 VHF R3-R5 VHF R6-R12 UHF E21-E69 PAL 525/60 (AV only) M.NTSC (AV only) NTSC (AV only) Satellite dish input: Female F-type 75 x2 Aerial - Rear: VHF/UHF Operating Conditions: Temperature: 0C 35C Humidity: 20% 80% RH (non condensing)
Terminals: AV1 IN Video (21 pin) 1V p-p 75 Audio (21 pin) 500mV rms 10k RGB (21 pin) 0.7V p-p 75 AV1 OUT Video (21 pin) 1V p-p 75 Audio (21 pin) 500mV rms 1k AV2 IN Video (RCAx1) 1V p-p 75 (COMPONENT/VIDEO) Audio (RCAx2) 500mV rms 10k (used for HDMI_ AV2 audio IN)
Video (RCAx3) Y:1V p-p 75 (including synchronisation) Pb/Cb, Pr/Cr: 0.35V p-p 75
HDMI1/2/3/4 Type A Connectors HDMI 1/3/4 : 4K, 3D (3D content of 4K format is not supported), Content Type, Deep Colour, x.v. ColourTM HDMI 2 : 4K, 3D (3D content of 4K format is not supported), Content Type, Audio Return Channel, Deep Colour, x.v. ColourTM This TV supports HDAVI Control 5 function.
12
-
DIGITAL AUDIO OUT PCM / Dolby digital / Fibre optic USB 1/2/3 USB1/2 : DC 5V, Max 500mA [Hi-Speed USB (USB 2.0)] USB3 : DC 5V, Max 900mA [Super Speed USB (USB 3.0)] ETHERNET RJ45, IEEE802.3 10BASE-T / 100BASE-TX / 1000BASE-T CARD SLOT Common interface slot (Complies with CI+) x2 Wireless LAN: CZ950E, CZW954, CZC954 Standard Compliance IEEE802.11a/n
Frequency Range IEEE802.11a/n: 5.180 GHz 5.320 GHz 5.500 GHz 5.580 GHz 5.660 GHz 5.700 GHz IEEE802.11b/g/n: 2.412 GHz 2.472 GHz Security WPA2-PSK (TKIP/AES) WPA-PSK (TKIP/AES) WEP(64 bit/128 bit) Wireless LAN: CZR950 Standard Compliance IEEE802.11a/n
Frequency Range IEEE802.11a/n: 5.15 GHz 5.35 GHz 5.47 GHz 5.85 GHz IEEE802.11b/g/n: 2.400 GHz 2.4835 GHz Security WPA2-PSK (TKIP/AES) WPA-PSK (TKIP/AES) WEP(64 bit/128 bit) Bluetooth wirelless technology: Standard Compliance Bluetooth 3.0
Frequency Range 2.402 GHz 2.480 GHz 3D Eyewear: Dimensions: Width: Height: Depth: 165mm 38mm 166mm Mass: Approx. 18g Usage temperature range: 0C 40C Materials: Main body /Lens section Resin OLED panel: TZLP018RNVE 3840 x 2160, 16:9 Visible Diagonal 1640mm Audio Output: 60W (10W x 2 + 10W x 2 + 10W x 2)
Headphones: 3.5mm, 8 Impedance
Accessories supplied : Remote Control Touch Pad Remote Control Pedestal Assy Cosmetic Cover Assy 4 x R03 Batteries 3D Glasses Scart cable AV cable Dimensions:
Width: Height: Depth: With Pedestal / Cosmetic Cover Assy 1,448mm 913mm 311mm
With Cosmetic Cover Assy 1,448mm 847mm 113mm
TV set only 1,448mm 847mm 106mm
Mass: With Pedestal / Cosmetic Cover Assy 32.0kg With Cosmetic Cover Assy 27.0kg TV only 24.0kg
Design and Specifications are subject to change without notice. Mass and dimensions shown are approximate.
13
-
Technical Description Specification of KEY for DTCP-IP, C2MOD, CI Plus, DIMORA, HDCP2, Netflix, Widevine, Freetime General information: PRO5 IC (IC8000) + eMMC(IC8920) 1. eMMc Memory(IC8920) for spare parts has the seed of KEY for each. 2. The final KEY data will be generated by Pro5 IC (IC8000) when SELF CHECK was done and are stored in both Pro5 IC (IC8000) and eMMc (IC8920). MTK IC (IC10000) + eMMC(IC14000) 1. eMMc Memory(IC14000) for spare parts has the seed of KEY for each. 2. The final KEY data will be generated by MTK IC (IC10000) when SELF CHECK was done and are stored in both MTK IC (IC10000) and eMMc (IC14000). All KEYs are not generated for all models. The necessary KEY are only generated and stored depend on the feature of models. Replacement of ICs: PRO5 IC (IC8000) + eMMC(IC8920) 1. When Pro5 IC (IC8000) is replaced, eMMc (IC8920) should be also replaced with new one the same time. 2. When eMMc Memory (IC8920) is replaced, Pro5 IC (IC8000) is not necessary to be replaced the same time. After the replacement of IC, SELF CHECK should be done to generate the final KEY data. MTK IC (IC10000) + eMMC(IC14000) 1. When MTK IC (IC10000) is replaced, eMMc (IC14000) should be also replaced with new one the same time. 2. When eMMc Memory (IC14000) is replaced, MTK IC (IC10000) is not necessary to be replaced the same time. After the replacement of IC, SELF CHECK should be done to generate the final KEY data. How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press the MENU button on the remote control for more than 3 seconds. TV will be forced to the factory shipment setting after this SELF CHECK. Model and Keys:
USB HDD Recording: General information: Digital TV programmes can be recorded in USB HDD. C2MOD key generated in A-board by SELF CHECK binds TV and USB-HDD for communication. That key is only one key for them. If the key is difference, TV can not access USB-HDD. Caution: New key will be generated by following SELF CHECK and previous TV programmes recorded in USB HDD will not be viewed. SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press the MENU button on the remote control for more then 3 seconds.
Model No.
Keys
DTCP-IP (PRO5)
DTCP-IP (MTK)
C2MOD (PRO5)
CI PLUS (PRO5)
DIMORA (PRO5)
HDCP2 (PRO5)
Netflix Widevine (PRO5)
Freetime (PRO5)
MAC (MTK)
TX-65CZ950E Yes Yes Yes Yes Yes Yes Yes No Yes TX-65CZW954 Yes Yes Yes Yes Yes Yes Yes No Yes TX-65CZR950 Yes Yes Yes Yes Yes Yes Yes No Yes TX-65CZC954 Yes Yes Yes Yes Yes Yes Yes No Yes
14
-
Service port (M3 mini Jack) Specifications The Service port (M3 mini Jack) on the following OLED TVs can use as the RS232C terminal which is a standard computer SERIAL interface. *This operation system should be used by the certified professional dealer. PC Control of the OLED TV The OLED TV can be controlled by a personal computer when connected through an RS232C/ M3 mini jack conversion cable (not supplied). The computer will require software which allows sending and receiving of control data through its SERIAL port. Please see required parameters and commands below. Communication parameters
Signal level RS-232C compliant Synchronization method Asynchronous
Baud rate 9600 bps Parity None
Character length 8 bits Stop bit 1 bit
Flow control - Basic format for control data The transmission of control data from the PC starts with a STX signal, followed by the command, the parameters, and lastly an EXT signal in that order. If there are no parameters, then the parameter signal does not need to be sent. *Please see other side regarding Commands and Parameters. Connection Notes: With standby mode, this OLED TV responds to "PON" and "QPW" commands only. Wait for the response of the first command to come from this unit before sending the next command. If multiple commands are transmitted, be sure to keep intervals of 250 m sec. Send the command again when the call back command is unusual. If an incorrect command is sent by mistake, this OLED TV will send an "ER401" or "ER402" command back to the computer. This OLED TV does not respond for 15 seconds when "PON" or "POF" commands are transmitted. Send "EXT" commands before sending "IMS:**" commands. MUTE commands ("AMT: 0" and "AMT: 1") and "AVL: ***" command are invalid in case of HDMI (CEC) cooperation. However AMT, AUU, AUD commands is effective. (MUTE rotation (toggle), VOLUME UP and VOLUME DOWN controls are possible.)
15
-
Main, Input & Picture Control Command
Control Command
Inquiry Command
Call back Command Parameter note
STANDARD CONTROL
POWER ON PON QPW QPW : * "0"(OFF)/ "1"(ON)
POWER OFF POF
VOL (level) AVL: ***
QAV QAV : *** "000" - "100" (up) AUU (down) AUD
MUTE AMT (Toggle) QAM QAM : * "0"(NO MUTED) / "1"(MUTED) AMT: *
ASPECT
DAM: ****
QAS QAS : ****
"FULL" "NORM"(4:3) "ZOOM" "SELF" (Auto) / ""HFUL" / "VFUL"
[ 480i/480p ] Option : 16:9(Full) 4:3 Zoom [ 1080i/720p/1080p ] Option : 16:9(Full) 4:3 Zoom [ 2560p/3840p(4k format) ] : Option : 16:9(Full) [ 4096p (4KDCI) ] : Option : 16:9(Full) H-Full V-Full
DAM (Toggle)
INPUT SELECT
CH UP CHU - - - - - - CH DOWN CHD - - - - - - TV IMS : TV
QMI QMI : **
"TV"
Analogue TV IMS : TVA "TVA" DVB-T IMS : TVD "TVD" DVB-S/Other Sat IMS : BS1 "BS1"
Freesat IMS : BS2 DVB-C IMS : CAB "CAB" SAT-IP IMS : SIP Video 1 IMS : V1 "V1" Video 2 IMS : V2 "V2" Component 1 IMS : C1 "C1" HDMI 1 IMS : H1 "H1" HDMI 2 IMS : H2 "H2" HDMI 3 IMS : H3 "H3" HDMI 4 IMS : H4 "H4" DisplayPort IMS : DP1 "DP1" SD/USB IMS : SDU "SDU"
VIEWING MODE
Dynamic VPC : VVT
QPC QPC : ***
"VVT"
Normal VPC : STD "STD"
THX Cinema VPC : THX "THX" THX : Except PHOTO(JPEG), MUSIC THX Bright Room VPC : THB "THB"
True Cinema VPC : CNM "CNM"
Cinema VPC : THR "THR"
Custom VPC : CST "CST" Monitor VPC : MON "MON" Professional 1 (isf day) VPC : PR1 "PR1" Professional 2 (isf night) VPC : PR2 "PR2"
16
-
Else & Remote Controller Key Command
Control Command Inquiry Command
Call back Command Parameter note
LAST VIEW LCH
Information
INF
-- QIF QIF : *****
480i 480p 576i 576p 720p 1080i 1080p 2160pQFHD 2160p4KDCI
"2160pQFHD" & "2160p4KDCI" only for 4k
DIRECT CH INPUT
0 ICH : 0 - - - 1 ICH : 1 - - -
2 ICH : 2 - - -
3 ICH : 3 - - -
4 ICH : 4 - - -
5 ICH : 5 - - -
6 ICH : 6 - - - 7 ICH : 7 - - - 8 ICH : 8 - - -
9 ICH : 9 - - -
MENU FUNCTION
MENU MEN - - -
SELECT SEL - - - RETURN RTN - - - EXIT EXT - - - ARROW LEFT ARL - - - ARROW RIGHT ARR - - - ARROW UP ARU - - - ARROW DOWN ARD - - - OPTION OSM - - - RED RED - - - GREEN GRN - - - YELLOW YEL - - - BLUE BLU - - - APPS APS - - - 3D O3D - - -
17
-
Setting Inspection Voltage Confirmation
A board Description Test point Voltage
USB5V TP5440 5.17V 0.25V USB1 TP8652 5.00V 0.25V USB2 TP8660 5.00V 0.25V USB3 TP8656 5.00V 0.25V USB-WIFI TP8650 5.2V 0.20V SUB3.3V TP5401 3.36V 0.15V MTK3.3V TP5200 3.33V 0.15V DCDC3.3V TP8970 3.00V 0.15V HDMI3.3V TP4507 3.33V 0.17V SUB_AI_3.3V TP2300 3.3V 0.17V MT_STB3.3V TP13019 3.3V 0.17V STB_1.5V TP11001 1.52V 0.07V MTK_SUB1.0V TP11000 1.02V 0.05V AVDD1.0V TP11002 1.06V 0.05V SUB1.8V TP8105 1.8V 0.9V SUB_M_0.9V TP8100 1.03V 0.09V SUB_I_0.9V TP8104 1.03V 0.09V STB_I_1.8V TP8108 1.8V 0.9V STB_I_1.5V TP8102 1.52V 0.07V STB_I_1.2V TP8109 1.29V 0.07V STB_I_0.9V TP8107 0.96V 0.13V HDMI1.1V TP4505 1.13V 0.06V RIO1.2V TP4504 1.22V 0.06V WOL3.3V TP8600 3.3V 0.17V REG_1.8V TP5702 1.84V 0.1V LNB_PWR1 TP6702 18V 1.0V SUB9V TP5004 9V 0.4V DMD_1.1V_3 TP5704 1.12V 0.11V
SUB_CI_5V TP8400 5.0V 0.5V SUB_CI_5V-B TP8500 5.0V 0.5V M_3.3V TP8492 3.3V 0.17V M_1.2V TP8406 1.2V 0.12V LNB_PWR2 TP6703 18V 1.0V SUB5V TP5420 5.06V 0.25V
18
-
CS Maintenance Menu MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can be adjusted by remote control in Service Menu How to enter into Service Mode While pressing [VOLUME ( - )] button on the main unit, press the [RED] button on the remote control for 3 times within 2 seconds.
How to exit Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
CS Maintenance Menu OPT EDID CLK DRV CHECK
Key Command
Press the ( / / / ) button to step up/down/right/left through the functions and adjustments Press the OK button to change the adjustment values. Press the RETURN button for return to the main menu.
19
-
System Information How to access
1. While pressing [MENU] button on the remote control. 2. To select [ Help] and then to select [System Information].(see Fig.16, Fig.17)
*Sample only
How to exit Press the [RETURN] button on the remote control.
System Information
SW version 3116-10400-02550 3116 10400 02550
Peaks SW GenX Main EASTER SW (DEC-SW)
Status1 0c 7201-0003 0000-0100 0c 7201-0003 0000-0100
Outer model ID Inner model ID Panel inch size
Status2 002d-102-0017b8 002d 102 0017b8
LSI Package LSI Release Model data version
Status3 00-000000-F000
00 00 00 00 F
Number of bad block in NAND Flash (dec) Peaks reboot counter System crash counter Emergency (SOS) counter Peaks NAND Maker ID
Status4 A00000-0000001-00000
A 00000 0000001 00000
Power-On period (A
-
Hotel Mode 1. Purpose Restrict a function for hotels. 2. Access command to the Hotel mode setup menu. In order to display the Hotel mode setup menu, please enter the following command (within 2 second). [TV] : Vol.[Down] + [REMOTE] : AV (3 times) Then, the Hotel mode setup menu is displayed.
3. To exit the Hotel mode: Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control or pressing [EXIT] button on the remote control. 4. Explain the Hotel mode setup menu.
ITEM Function Hotel Mode Select hotel mode ON/OFF Initial INPUT Select input signal modes.
Set the input, when each time power is switched on. Selection: Off/DVB-S/DVB-T/AV1/AV2/ HDMI1/HDMI2/HDMI3/HDMI4/ *Off: give priority to the last memory. However, Euro Model is compulsorily set to TV.
Initial POS Select programme number. Selection: Off/0 to 99 *Off: give priority to the last memory
Initial VOL Level Adjust the volume when each time power is switched on. Selection/Range: Off/0 to 100 *Off: give priority to the last memory
Maximum VOL Level
Adjust maximum volume. Range: 0 to 100
Button Lock Select local key conditions. Selection: Off/SETUP/MENU *Off: altogether valid *Setup: only F-key is invalid
(Tuning guide (menu) can not be selected.) *MENU: only F-key is invalid
(only Volume/Mute can be selected.) Remote Lock Select remote control key conditions.
Selected Off/SETUP/MENU *Off: altogether valid *Setup: only Setup menu is invalid MENU: Picture/Sound/Setup menu are invalid
Private Information
Select private information for VIERA Cast is Keep or Reset if Hotel mode is set to [On] when TV power on. Selection : Keep/Reset Keep: private information for VIERA Cast is keep Reset: private information for VIERA Cast is reset
Hotel mode
Hotel mode Off
Initial INPUT Off
Initial POS Off
Initial VOL Level Off
Maximum VOL Level 100
Button Lock Off
Remote Lock Off
Private Information Keep
Select
RETURN
Change
21
-
Data Copy by USB Memory Purpose a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to USB Memory and then copy to new A-board.
b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to USB Memory and the copy to other TVs.
Preparation Make pwd file as startup file for (a) or (b) in an empty USB Memory.
1. Insert an empty USB Memory to your PC. 2. Right-click a blank area in a USB Memory window, point to New, and then click text document. A new file is created
by default (New Text Document.txt). 3. Right-click the new text document that you just created and select rename, and then change the name and
extension of the file to the following file name (a) or (b) and press ENTER. File name:
(a) For Board replacement: boardreplace.pwd (b) For Hotel: hotel.pwd
Note: Please make only one file to prevent the operation error. No any other file should be in USB Memory.
(After exchanging)
TV
A-board USB Memory
(Before exchanging) Copy to USB Memory
Following data can be copied. User setting data (inc. Hotel mode setting data) Channel scan data Adjustment and factory preset data
Master TV Other TV Other TV Other TVFollowing data can be copied. User setting data (inc. Hotel mode setting data) Channel scan data
Copy to USB Memory Copy from USB Memory
USB Memory
22
-
Data Copy from TV set to USB Memory 1. Turn on the TV set. 2. Insert USB Memory with a startup file (pwd file) to USB Terminal.
On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control.
(a) For Board replacement: 2770 (b) For Hotel: 4850
Data will be copied from TV set to USB Memory. It takes around 2 to 6 minutes maximum for copying.
4. After the completion of copying to USB Memory, remove USB Memory from TV set. 5. Turn off the TV set.
Note: Following new folder will be created in USB Memory for data from TV set.
(a) For Board replacement: user_setup (b) For Hotel: hotel
Data copy (Board replacement) or (Hotel)
Input Password 2770 or 4850
Performing
Completion
Performing
Data Copy(Board replacement )
Input password -----
Data Copy(Board replacement )
Input password -----
Data Copy(Board replacement )
Copy TV to Media Please wait for a while
Please do not remove the Media GETTING
Data Copy(Board replacement )
Data copy has been successful
Please remove Media FINISH
23
-
Data Copy from USB Memory to TV set 1. Turn on the TV set. 2. Insert USB Memory with Data to USB Terminal.
On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control.
(a) For Board replacement: 2771 (b) For Hotel: 4851
Data will be copied from USB Memory to TV set. 4. After the completion of copying to USB Memory, remove USB Memory from TV set.
(a) For Board replacement: Data will be deleted after copying (Limited one copy). (b) For Hotel: Data will not be deleted and can be used for other TVs.
5. Turn off the TV set. Note:
1. Depending on the failure of boards, function of Data for board replacement does not work. 2. This function can be effective among the same model numbers.
Input Password
Performing
Input Password 2771 or 4851
Performing
Completion
Performing
Data Copy(Board replacement )
Input password -----
Data Copy(Board replacement )
Copy Media to TV Please wait for a while
Please do not remove the Media WRITING
Data Copy(Board replacement )
Data copy has been successful
Please turn off the TV for system initializing FINISH
24
-
Option Bytes Description OPTION1 b1 TEXT Ch Refresh ON (1) / OFF (0)
b2 ID-1 ON (1) / OFF (0) b3 Macrovision Auto-judge ON (1) / OFF (0) b5 Reserved - b6 Enable HDMI force reset ON (1) / OFF (0) b7 Reserved -
OPTION2 b0 Adjust Igain enable ON (1) / OFF (0)
b1 A2 BG enable (5.5MHz) ON (1) / OFF (0) b2 A2 DK1 enable (6.26MHz) ON (1) / OFF (0) b3 A2 DK3 enable (5.742MHz) ON (1) / OFF (0) b4 NICAM scan ON (1) / OFF (0) b5 NICAM BG enable (5.5MHz) ON (1) / OFF (0) b6 NICAM I enable (6.0MHz) ON (1) / OFF (0) b7 NICAM DK enable (6.5MHz) ON (1) / OFF (0)
OPTION3 b0 NICAM priority ON (1) / OFF (0)
b1 Reserved - b2 Reserved - b3 A2 DK2 enable ON (1) / OFF (0) b4 Inhibition of countermeasure for SIF signal drop ON (1) / OFF (0) b5 Get onid from physical CH (CHINA) ON (1) / OFF (0) b6 SSU search enable for HOTEL model ON (1) / OFF (0) b7 SASO mute (ASIA) ON (1) / OFF (0)
OPTION4 b0 Countermeasure for Taiwan NTSC noise sound ON (1) / OFF (0)
b1 Enable Compatible with Video and Sound for Analog VIF ON (1) / OFF (0) b2 3DYC color motion detect ON (1) / OFF (0) b3 RF Clamp Current minimum (TAIWAN) ON (1) / OFF (0) b4 Reserved - b5 Reserved - b6 Reserved - b7 Enable workaround for Polsat CAM problem (POLAND) ON (1) / OFF (0)
OPTION16 b0 PIP (derivate models) ON (1) / OFF (0)
b1 Bass Boost sound menu enable (derivate models) ON (1) / OFF (0) b2 Digital Remaster sound menu enable (derivate models) ON (1) / OFF (0) b3 XR-Audio Pro Surround sound menu enabel (derivate models) ON (1) / OFF (0) b4 Ambience sound menu enable (derivate models) ON (1) / OFF (0) b5 Reserved - b6 Reserved - b7 Reserved -
25
-
Self Check How to access Self-check indication only: While pressing [VOLUME ( - )] button on the main unit, press [BLUE] button on the remote control. Self-check indication and forced to factory shipment setting: While pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for more than 3 seconds.
How to exit Switch off the power with the [POWER] button on the main unit. Model ID
TX-65CZ950E TX-65CZW954 TX-65CZC954 TX-65CZR950 0C 03000101 00080000
0C 03000102 00080000
0C 03000102 00080000
0C 03000103 00080000
Display Ref. No. Description P.C.B. H14TUN TU6708 TUNER A/DVB-T/T2/C/(S)x2 A-Board H15TUN2 TU6708 TUNER A/DVB-T/T2/C/(S)x2 A-Board H90STBY IC1100 IC Genx8 A-Board H30AVSW IC3000 IC Brownie A-Board H07TEMP IC5900 TEMP. SENSOR A-Board H17LAN IC8600 Ethernet Controller A-Board H00FE IC6800 DVB-T2/T/C/S2/S Demodulator A-Board H00SAT-TU IC6803 DVB-T2/T/C/S2/S Demodulator A-Board H96ID IC8920 CI+,DTCP-IP, C2MOD A-Board H97ID2 IC8920 Dimora, HDCP2.2, Netflix, Widevine A-Board
H45BT IC8000 / IC8650 N5HZZ0000130 IC Peaks-Pro5 / USB HUB
BTDongle A-Board
BT Dongle
H42WIFI IC8000 / IC8650 N5HBZ0000109 IC Peaks-Pro5 / USB HUB
Wifi Dongle A-Board
Wifi Dongle H36GCX IC9500 IC Image Processor FR-Board H37GCX2 IC9600 IC Image Processor FR-Board H80HDMISW1 IC4512 HDMI SW A-Board H80HDMISW2 IC4510 HDMI SW(RIO IC SWITCH) A-Board H71TCON FRC-TCON FRC-TCON OLED PANEL
H18LAN2 IC8655/IC14000 Internall Ethernet Controller and MAC address for Easter A-Board
H84ID3 IC14000 DTCP-IP for Easter(MT5810) A-Board H91MEM1 IC8901 GenX8 EEP (checksum error) A-Board
If the CCU ports have been checked and found to be incorrect or not located then " - - " will appear in place of "O.K.".
TX-65CZ950E TX-65CZW954 TX-65CZC954 TX-65CZR950
Self Check Complete
H14TUN O.K. H15TUN2 O.K. H90STBY O.K. H30AVSW O.K. H07TEMP O.K. H17LAN O.K. H00FE O.K. H00SAT-TU O.K. H96ID O.K. H97ID2 O.K. H45BT O.K. H42WIFI O.K. H36GCX O.K. H37GCX2 O.K. H80HDMISW1 O.K. H81HDMISW2 O.K. H71TCON O.K. H18LAN2 O.K. H84ID3 O.K. H92MEM1 O.K.
PEAKS-SOFT *.***PEAKS-EEP **.**.**** LSI-PACKAGE *.*** LSI-RELEASE *.** STBY-SOFT *.**.** STBY-EEP *.**.**** STBY-ROMCOR *.**.** GCX DATA ******** DEC-SOFT *.*** DEC-EEP **.**.**** LSI-PACKAGE *.*** LSI-RELEASE *.** STBY-SOFT *.**.** STBY-EEP *.**.****
MODEL ID ** ******** ********
26
-
4 sec Once
Power LED blinking timing chart 1. Subject
Information of LED Flashing timing chart. 2. Contents
When abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by number of blinking of the Power LED Red on the front panel of the unit.
Blinking times Blinking timing Contents Check point
1 Panel SOS OLED PANEL
2
EVDD(24V)_SOS
OLED PANEL P2 Board
7
SUB3.3V_SOS
A BOARD P2 Board
8
Power SOS P2 Board
9
SOUND SOS
A BOARD Speaker
10
GCX SOS
FR BOARD
13
EMERGENCY SOS A BOARD
Note: LED Flashes Orange - Panel adjustment in progress (This is not malfunction). It takes approximately 10 minutes (20 minutes max.). What is Panel adjustment function? The use of the OLED panel for a long period causes no uniformity of charge in each OLED cell and there is a possible cause of "image retention. To reduce the "image retention" Panel adjustment function is newly introduced for OLED models TX-65CZ950 series. When "image retention" is not reduced by this function it seems that the "image retention" is permanent due to deterioration of OLED cell. During the Panel adjustment period please avoid touching or exerting any pressure on the screen e.g. wiping the screen, etc. If the Panel adjustment has been completed LED lights Red or Orange (standby mode). The Panel adjustment function starts running automatically after switching off to standby if the TV has been in operation for at least 3 hours since the last panel adjustment. If the Panel adjustment has been interrupted before completion it will start again after the next switching off to the standby mode. How to activate Panel adjustment function manually: Step 1. Change from Home mode to Shop mode
1. MENU button on remote control is pushed and while selecting "Picture" in menu press Green button on remote control for more than 3 seconds.
2. OSD screen (Figure 18) is displayed. "Shop" is selected. Step 2. Pull out and insert the main plug. After TV turns on Panel adjustment function is activated. Step 3. Change from Shop mode to Home mode after finish this function. 1. OSD screen (Figure 18) is displayed according to the procedure of Step1. 2. Select Home mode Note: When TV has already been set to Shop mode the procedure of Step1 and Step3 is unnecessary.
No Light
Light
Fig.18
27
-
OLED Panel Test Mode Purpose: To find the possible failure point where in OLED Panel, FR board or A board when the abnormal picture is displayed. Procedure: Step 1. Go into OLED Panel test mode and confirm the symptom
While pressing [VOLUME ( - )] button of the main unit, press [YELLOW] button of the remote control three times within 2 seconds.
The several test patterns generated by OLED Panel are displayed. Judge by the following method: Still abnormal picture is displayed: The cause must be in OLED Panel. Exit test mode. Normal picture is displayed: The cause must be in A board or FR board. Go into FR test mode Step 2. Go into FR test mode and confirm the symptom During in OLED Panel test mode, press [OK] button on the remote control. The test pattern generated by FR board is displayed. Judge by the following method: Abnormal picture is displayed: The cause must be in FR board. Normal picture is displayed: The cause must be in A board. Step 3. Go into Additional OLED Panel test mode During in FR test mode, press [OK] button on the remote control. The several additional test patterns generated by OLED Panel are displayed. Result and Judgment are same as step 1. Step 4. How to Exit: Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control in OLED
Panel test mode or FR test mode. Remarks: 1. During OLED Panel test mode and FR test mode, Power LED red and green are flashing alternately. 2. To display the test pattern in FR mode, input signal from HDMI, AV or antenna terminal. If no signal input, the test pattern wont be generated and no test pattern is displayed.
28
-
A-BO
ARD
FR-B
OAR
D
P2-B
OAR
D
PN-B
OAR
D
P1-B
OAR
DK-
BOAR
D
A20
WIF
I
BT
Wiring Diagram
CN
0100
CN
0101
CN
1300
3
CN
1300
4
CN
8731
SERVICE CONNECTORS SER
VIC
EC
ON
NEC
TOR
S
TU67
08TU
NER
HD
MI1
JK36
01
HD
MI2
JK36
02
HD
MI3
JK36
03
HD
MI4
JK36
04
AV s
cart
JK30
02
HP
JK33
80
DIG
ITA
L A
UD
IOO
UT
D32
00
CI S
LOT
2x
CN
8400
RS2
32C
JK38
50
ETH
ERN
ET
JK86
00
Y,Pb
,Pr
INA
UD
IO L
/R IN
JK30
01
A15
FR16
A16
FR15
A02
FR21
FR11
OLED PANEL
FR10
CN
9020
P5FR
20
P11
P21
P7 P6
P13
P23
PN50
FR50
A10
K10
GK-
BOAR
D
GK
1
S-BO
ARD
S1
CO
NFR
13
TWEE
TER
SPEA
KR
L
SP-L
SP-R
TWEE
TER
SPEA
KR
RJK
8651
USB
1
JK86
50JK
8652
USB
2U
SB3
[3.0
]
CN
10
CN
6
CN
11
CN
5
CN
9300
29
-
IC8401(C1ZBZ0004936)
DUAL CI CONTROLLER
IC8000[MN2WS0300PB]
Peaks Pro5
Block Diagram (1/3) A-Board (1/2)
A-BOARD[EXCHANGE UNIT]
CN0100Service
JK36
01
HD
MI1
JK36
02
HD
MI2
JK36
03
HD
MI3
HD
MI4
JK36
04
JK30
02
AV_VIN 11AV_VOUT 2
AV_RED/C 18
AV_GREEN 15
AV_BLUE 13
AV_LIN 7
AV_LOUT 5
AV_RIN 8
AV_ROUT 4
AV S
CA
RT
JK33
80
HP-
OU
T
RJK
3001
Y/V
in,P
B,P
RA
UD
IO IN L
R
Dig
ital
Aud
io O
ut
D32
00
CI SLOT (MAIN)CN8400
17,18 51,52
CI SLOT (SUB) 17,18 51,52
A15
A16
TO FR
15TO
FR16
3
7
9-10
A02
TO FR
21
10
11
7
14
44
45
1 - 4
9
13
A10
11
13
9
TO A
10-K10/B
T/CO
N(S1)/G
K1
8
4
7
6
5
14
2
JK3850RS232CETHERNET
JK8600
MX4
-
MX4
+
MX3
-
MX2
-
1 2 3 4 5 6 7 8
MX2
+
MX3
+
MX1
-
MX1
+
JK8652USB3
JK8650USB1
JK8651USB2
A20WIFICN8731
SERVICE
SUB
3.3V
DAT
A
TU
NER
DVB
-A/(T
2/C
/S)x
2
TU67
08
2
3,4
1,34
35
6,75
12
1132
30,31
8,9
10
25
17,18
33
20,211924
27
22,23
SUB3.3VREG_1.8V
DMD_SCL0_T DMD_SDA0_T
IFAGC1 TIFAGC
GPI01RST_X IC6800
[C1AB00004164] DVB-T/T2/C DEM
48
47
29
AF13 - AUDIO OUTPUT
IF1_P,N 37,38TAINP/TAINM
IF2_N,P B_TAINPB_TAINM
T1,T2N4
TIFAGC
Tuner/Dem
IFAGC2_T
IC3000C1AB00004175
BROWNIE
FE_XRST_T
RST XSIAIN,SQAIN
DEMOD_2_SCL/SDA
29
FE_XRST_T
IC6803[C1AB00004164] DVB-T/T2/C DEM
2931,32
4837,38
5,8,3,49,12,13,14,15,16
17
22,28,44,10
19,7
T2_FEF
DMD_SCL2_T DMD_SDA2_T
IFAGC1_S TIFAGCIF1_P,N_S IF1_P,N_S
EU_2ND_SDA/SCL
BISQ-Q1,I1_T
SU
B_C
I_5V
SU
B_C
I_5V
MA
IN_T
S_O
UT
MA
IN_T
S_IN
TS
IC8403-6 IC8503-4IC8407-8
SU
B3.
3V
SU
B5V
SU
B3.
3V
SU
B5V
SU
B_T
S_O
UT
SU
B_T
S_IN
TS
MA
IN_T
S_O
UT
SU
B_T
S_O
UT
MA
IN_T
S_IN
SU
B_T
S_IN
IC C
AR
DA
UD
IO IN
PUT
AU
DIO
OU
TPUT
BE C
OM
MO
N I/O
& IR
Q
SPI
SD C
AR
D I/F
1 3,5,7-12
TS DATA 1-7TS1 VALIDTS1 PSYNCTS1 DATA0TSI CLK
Parallel TS
TS INPUT
DMD_1.2/1.1V
SUB 3.3V
IIC_2
DEMOD_1SCL/SDA
20,21
45,46
20,21
31,32
AGCBS2_T 26
23
23
BISQ-Q2,I2_T
IC6876 LNB_PWR113
12,1616V
LNB_PWR16,7
DMD_SDA/SCL1_T
DMD_SDA_SCL1_T
3
DSQOUT_0IC6878 DSQ_SW
8
17
6 DSQOUT_1
SUB3.3V
16V
DSQOUT_1LNB_PWR2 IC6877
LNB1312,16 6,7
3
FE_SAT_XRST_T AH24 TS Input
26 EXT_AGCBS1_T
47T2_FEF1 T2_FEF1
DMD_1.2/1.1V
SUB3.3V
Parallel TSCH0_VAL,SYNC,CLK, DATACH1_CLK,VAL,PSYNC,DATA CH2_CLK,VAL,PSYNC
SIDE2_LIN_TERMINAL C12 SIDE2_RIN_TERMINAL C11
CMPY
CMPPB
CMPPR
YSYNCCMPY
Y8
Y9
Y10
Y4
Component
Audio IN
V1
SCART_R
SCART_G
SCART_B
R IN
L IN
L OUT
R OUT
B12
A12
Y15
AA2
A9
VOUT
B9
HP_L
HP_R
Y3 Composite
Y5
Y6
Y7
Scart
Audio IN
VDAC
VIDEO INPUT
IC3104Audio Amplifier
7
1
6
2
Audio Out
A8
B8
71 - RX2P5VDET 72 - RX1P5VDET
IC3320HP Amplifier
9
11
13
15
SUB9V
SUB3.3V
IC3102Video SW7
53
4
I2C (Digital Audio for SCART_out)AE11, AD13,AE13,AE12 Audio Output_AO2C10,D10,D9,D8 I2S(IN)
I2C (Digital Audio for HP_out) AK7,AJ6,AJ7,AH6 Audio Output_AO3D7,C8,C9,A7 I2S(IN)I2C (Aalog_AV Audio)_A1
AK3,AH5,AJ4 Audio Input_AI1B6,A6,C6 I2S(OUT)
H19,H20,J19,J20K19,K20,L19,L20
HDMI TX
SD VIDEO (IN) AA5,Y5-Y2,W7 Video OutputE13,D13,E14,D14,D15 RST_X
G2 AE2 Video Input Reset
A16,B16,C15 AH16,AG16,AF17 MCSSI SPI1
IC8875Level Shifter
6,4,5 11,13,12
MS0DIMS0DOMS0CLK
B15 SPI1 AE17 MCSSIMS0CS0
SPI_RXD,SYNC,SCLK(Teletext)AC5,AB5,AB6 SPI
SUB3.3VSUB1.8V
A15,E15,C14 SPI2
IIC_2E1,E3F2,F3
AG15,AH15
D3.3VD1.1VA3.3VA1.1V
AO1IEC
SUB3.3V
AJ8 Audio OutAO1IEC
P_R1HPD
HPDO0
5VDET0
DDCSDA0
CEC
1_RX 1_RX
R3613
DDCSCL0
CECPUL
CEC0 IC4512[MN864788]HDMI2.0 Rx
IC10000(MT5810PEHJ)
EASTERIC4510(MN7S504)
RIO
IC1100[MNZSFH9GAM1]
55,56,58,5961,62,64,65 RX2
80,81,83,8486,87,89,90 RX1
93,94,96,9799,100,102,103
22,24,25,27,2830,31,33,
W3,Y3,W4,Y4W5,V5,W6,Y6
P19,20;N19,20M19,25;L19,20K19,20;J19,20H19,20;G19,20
AU37,AV37,AR36AT36,AR35,AT35AU35,AV35,AR34AT34,AR33,AT33AU33,AV33,AR32
AT32
W11,Y11,W12Y12,W13,Y13
W14,Y14
A16,B16
A14
RIO
TXD
DC
SCL
RIO
TXD
DC
SDA
B14
R19,R20
V19,U18U20,T18
AN25,AL25
AP36,AM31AN30,AN31
CH0-7
TCON11,12
1,144TX
TX0DDCSCL0TX0DDCSDA0
RX0 TX0
42,43,45,4648,49,51,52 RX3
HPDO0STM_P31LCD_TV_SUB_ON1 STM_P41 52
55HPDO1 2 STM_P42
7 STM_PF3STM5VDET0
14 STM_PF1STM5VDET1
10 STM_PD0STMDDCSDA0
12 STM_PD2STMDDCSDA1
13 STM_PD3STMDDCSCL1
3 STM_P34STMHPDO2
23 STM_PF2
AL2
7A
D36
TCON
DDR I/FCH A/B/CeMMC
A9,B9,A10,B10A11,B11,A12,B12
R0D0P/NR0D1P/NR0D2P/NR0D3P/N
GPI
O
AUDIO
STM5VDET2
15 STM_PD4STMDDCSDA2
16 STM_PD5STMDDCSCL2
83 STM_P40STMHPDO3
100 STM_PF4STM5VDET3
M_GPIO50
M_OPCTRL20
96 STM_PD6STMDDCSDA3
97 STM_PD7STMDDCSCL3
41 STM_P10PWM_ENB
58 STM_P37DISPEN
99 STM_P64
11 STM_PD1STMDDCSCL0
95 STM_P76STMCEC073 STM_P02GCX_XRST
94 STM_PF0STMCEC0
73 - RX0P5VDET75 - RX3DDCSCL
106 - RX0DDCSDA107 - RX0DDCSCL70 - RX3P5VDET74 - RX3DDCSDA
104 - RX1DDCSDA 105 - RX1DDCSCL
HPDO1
5VDET1
DDCSDA1
CEC
2_RX
R3603
DDCSCL1
2_RX
ARCOUT
CECPUL
CEC0
ARCOUT P5
U29 eDP RX HPD
HPDO2
5VDET2
DDCSDA2
CEC
3_RX
R3633
DDCSCL2
3_RX
CECPUL
CEC0
HPDO3
5VDET3
DDCSDA3
CEC
4_RX
R3638
DDCSCL3
4_RX
CECPUL
CEC0
STB_I_0.9VSUB_M_0.9V SUB3.3V SUB_I_0.9V STB_I_1.8V SUB1.8V STB_I_1.5VHDMI_3.3V STB_I_1.2V
IC8920eMMC 4GB
IC14000eMMC 4GB
SUB
3.3V
SUB
1.8V
eMM
C C
AR
D I/F
DDR3 _ 4X4GBIC8200IC8201IC8202IC8203
DD
R I/F
SU
B1.
5V
DDR3 _ 5X4GBIC12000 IC12001IC12002 IC12003
IC12004 STB1.5V
SUB
5V MTK3.3V
IC8204
DC
DC
3.3V
2,6
3,8 4
STB_I_1.5V
5,7
VTT
VREF
RXD TX
D
IC3850RS232C
1716
1315
(STM
_P64
)H
OTE
L_SB
I(S
TM _
P63)
HO
TEL_
SBO
HOTEL_SBI
98 STM_P63HOTEL_SBO
36 STM_P23WOW_ON_IRQ
46 STM_P15WOW_ON_IRQ
1 2,3 5,6
IC86
54
SW
6 1
3 4
USB
5V
USB
1VB
US
USB
1OD
USB
1DP_
N
USB
1RXP
_N
8,9
USB
1TXP
_N
USB I/F
VIDEO
INPU
T
BE R
ESET
VIDEO
INPU
T
PCI e
I2C
BE C
OM
MO
N I/0
1 2 3
IC86
52
SW
6 1
3 4
USB
5VP_
VI1Y
5
OVC
UR
2
OVC
UR
2
DM
2
AF4
AF3
DP2
1 2 3
IC86
53
SW
6 1
3 4
USB
5VP_
VI1Y
6
OVC
UR
2
DM
1
DP1
DM
2
DP2
IC8650USB HUB
7 6 24
P_VI
1Y5
P_VI
1Y6
4 12 13 325
1 2 3
IC86
51
SW
6 1
3 4
STB
5V
4
VBU
S
STM
_P23
STM
_P04
STM
_P15
USB0DPUSB0DN
21
SUB
3.3V
5,9,14,21,28 10 11
X8650
16
15 BT_USBDN
BT_USBDP
15
BT_USBDP
BT_USBDN
BT_3.3V
R_LED_ON
G_LED_ON
AI_SENSOR
REMOTE
KEY
STB3.3V
SUB3.3V
POWER ON
P16V
STB5.3V
LCD_TV_SUB_ONPANEL_VCC_ON
TCON_ON
PANEL_MAIN_ON
SOS_PS
SOUND_SOS_DET
2,3;5,6;8,9;11,12;14,1517,18;20,21
23,24;26,2729,30;32,3335,36;38,39
41,42
R1D0P/N+1P/NT0D0P/N+1P/NT0AUXP/NT1D0P/NT1D1P/N
R1D2P/N;R1D3P/NT0D2P/N;T0D3P/NT1AUXP/NT1D2P/N;T1D3P/N
LOGO_ON
DISPEN
PWM ENB(OENB)
OFFRS_DONE
EVDD_DET
BL-SOS(PNL_SOS)
DCDCEN_3
46
4749
50
51
PG_ERXW
GCX_XRST
HOST_SDA
HOST_SCL
XECS2
ED(0-7)
ES(0-2)
G1_INTER1
1_INTER0
2_INTER1
2_INTER0
VODPVSYNC
PEAKS_GPIO
DCDC5V
AMREADY
TEMP-SENS_SCL
AMP_STBY
AMP_XRST
AO1D1
AO1D0
AO1LRCK
AO1BCK
AO1DACCK
TEMP-SENS_SDA
TCON_SDA 49
48
46
45
44
43
25,23,21
19
18
17
16
15
14
13
11
10
9
8
7
5
6
4
1
2
3
41,39,37,3533,31,29,27
47 TCON_SCL
IC8901EEPROM STM
STB3.3V49,50
STM_EEP_WP 51
IC5000[AN34043AAVF]ANALOG ASIC
1 6 2 14 31
STB
5V
STB
5V
RIO3.3VRIO1.2V
SU
B5V
SU
B9V
32
STB
3.3V
16V
OV
P
7DTV XRST
P X
RS
T
V24
V6
eDP R
X
T1,T2,R3,P4R2,R1,P2,P3
AS
IC-S
UB
ON
8
F25
G23
DC
DC
EN
11
DC
DC
EN
11
PE
AK
SR
ST
12
OV
P
16V
SUB
5V
USB
5V
USB
5V
STB_I_1.5V
STB_I_1.2V
SUB
_M_0.9 V
SUB
_I_0.9 V
SUB
1.8V
SUB
3.3V
MTK
3.3V
DC
DC
3.3V
LCD_TV_SUB_ON
M_DEMOD TSDATA6
Q8106Q8108
DC
DC
EN_2
B_H
DM
I
Q8104Q8105
DC
DC
EN_3
22
SP_H
P_M
UTE
53 SP_HP_MUTE 25
MO
N_M
UTE
54 MON_MUTE
HP
_MU
TE
23
EX
T_M
UTE
24
M_DEMOD_TSDATA5
AL27M_GPIO50
LCD_TV_SUB_ON
AD36M_OPCTRL20
R0D0P/NR0D1P/NR0D2P/NR0D3P/N
IC8882Level Shifter2
3
67
RIOTXDDCSCL
RIOTXDDCSDA
SCLASDAA
HDMI3.3V
SUB1.8V1
8
IC6600Level Shifter4
6
1113
M_DEMOD_TSDATA6
M_DEMOD_TSDATA5
P_XIRQ9P_XIRQ10
MTK3.3V
SUB1.8V1
16
IC8603Level Shifter
IC903C0JBAU000136
IC8655
IC8656
4
5,42,119
18,17
16,15
16,15
14,13
14,13
19,20
14,138,9 6,7
3,2
3P_XPERST
ETHER_RST
M_RXVN/P_1_N/P
M_TXVN/P_0_N/P
PERSTB
PHY3.3V
SUB1.8V1
SUB3.3V
SUB3.3V
23,32,12
1,6,12
SUB3.3VSUB1.8V1,8
6
P_PER0N/P
REF_CLK2_N/PP_PET0N/P
REF_CLK_N/PREF_CLK2_P/N
CLK_GEN_SCL/SDA
REF_CLK2_N/P
P_PECLKN/PCLK_GEN_SCLCLK_GEN_SDAP_SCL3P_SDA3
IC44004
3
SUB3.3V6 SUB1.8V1
AO1D2
P_XCMPREQ
U7
P_P
OR
T16(S
DA
A)
P_P
OR
T17(S
CLA
)
V2
P_X
IRQ
5
V3
P_X
IRQ
6
AA
29P
_XIR
Q2
Y26
P_X
IRQ
4
AB
3P
_VI1C
5
W2
P_X
IRQ
9W
1P
_XIR
Q10
W3
P_X
IRQ
8A
C7
P_X
IRQ
19V
26P
_PO
RT0
V25
P_P
OR
T1
AE
19P
_XP
ER
ST
AG
20A
H21
AB
25Y
24
AK
15A
J15
P_P
ER
0N/P
AJ21
AK
21P
_PE
R0N
/P
13
T8600
15 18 19 21 16 24 22
1 3 4 6 7 9 10 12
IC8600[C1CB00004130]
LAN CONTROLER
10 9 7 6 5 4 2 1
WO
L3.3
V
11,23
IC8602 STB5V
ETHER_RST
REF_CLK_P/N
19 16,15
P_SCL3
P_SDA
3
P_SDA
1P_SC
L1
IC8885Level Shifter5
34STM_P35
P_LPST
P_XIRQ8
SUB3.3V
SUB1.8V1
6
STM_P3556STM_P6517STM_P3051STM_P50(REMOTE)32
STM_P80 (AI)
G_LED_ON
84
6R_LED_ON5
STM_P81 KEY185
STM_P24 KEY337PANEL_VCC_ON229PANEL_MAIN_ON
BL_ON31STM_P62(SOS_PS)28SOUND_SOSDET27
STM_P21 BL_SOS34STM_P15 EVDD_DET46
STM_P17 LOGO_ON48
P_LPST
P_VI1HSYN
C
TIMER
AU
DIO
OU
TPUT
AE26
P_AO
1DA
CC
KA
K9
P_AO
1BC
KA
J10P_A
O1B
CK
AJ9
AK
10
AH
10
P_XERW
E1T24
AD
3
AO1D2
IC8409Logic IC
SU
B3.
3V
IC8880Level Shifter4
6
1311
PD_RXD1
PD_TXD1P_TXD0
P_RXD0
SUB3.3V
SUB1.8V1
16
P_SBI0/SBO0P_TXD1/RXD1
eDP RX eDP TX
P_AO
1D0
P_AO
1D1
30
-
A-Board (2/2)
A-BOARD[EXCHANGE UNIT]
16VIC11000
DC/DC
1712,23,26
SUB5V 10,15
MTK_SUB1.0V3DCDCEN_5
16V IC11001DC/DC 6
8 STB_1.5V1DCDCEN_4
1DCDCEN_2
MTK3.3V IC11002DC/DC 6
8 AVDD1.0V
SUB5V IC13001DC/DC 3
4 MT_STB3.3V
SUB5V IC3005DC/DC 3
2 D1.1V
A1.1V
RIO3.3VVDD3.3V
SUB5V IC4511DC/DC 3
2 RIO1.2V
SUB5V IC4513DC/DC 3
2 HDMI1.1V
P16V IC5200DC/DC 3
2 MTK3.3V
P16V IC4515DC/DC 3
2
7
DCDCEN_4 7
P16V IC5400DC/DC 6
8 SUB3.3VDCDCEN_2 1
P16V IC5420DC/DC 6
8 SUB5VDCDCEN_2 1
P16V IC5440DC/DC 8,7
2 USB5VDCDCEN 3
DCDCEN_3
SUB5V IC5705DC/DC 3
2 DMD_1.2/1.1V
DCDC3.3V[STB3.3V] IC8100
DC/DC 18 STB_I_0.9V
HDMI3.3V HDMISW3.3V
L4514AVDD3.3VL4513
AVDD3.3VRXL4515PVDD3.3VL4516
5
DCDCEN_3
DCDCIN[P16V] IC8101
DC/DC 85 SUB_M_0.9V
4
DCDCEN_3
DCDCIN[P16V] IC8102
DC/DC 32 STB_I_1.5V
7
DCDCEN_3
DCDCIN[P16V] IC8103
DC/DC 68 SUB_I_0.9V
1
DCDCEN
DCDCIN[P16V] IC8104
DC/DC 32 SUB1.8V
7
DCDCEN_3
DCDCEN
STB5V IC8105DC/DC 6
8 STB_I_1.2V
1
IC8402Reg
34M_1.2V
IC8410Reg
34M_3.3V
SUB3.3V
SUB5V
DCDC3.3VIC8970Regulator
STB5V 38
7
SUB3.3VIC2301Regulator
SUB5V34
L2000BT_3.3V
DCDC5VIC4200SUB5V 61
SUB3.3V IC5703Regulator 43
REG_1.8V
IC8106Regulator
51DCDC3.3V STB_I_1.8V
IC8400Regulator
5SUB_CI_5VSUB5V 1
WOL3.3VIC8602Regulator
SUB5V 54
16V PA2000 DCDCIN
STB5.3V VJ5400STB5V
31
-
G_P
1_R
X1,R
X0(P
,N)
G_P
0_R
X1,R
X0,T
X1,T
X0(P
,N)
G_C
K27
RX(
P,N
)
TO A15
FR16 6
ERXW
7
GC
X_XR
ST
8
FR15 1
TO A16
2
3 5
LOG
O_O
N
Block Diagram (2/3)
AE2
2
AF2
3
AF2
5
IC96
00[M
N85
064]
IMA
GE
PRO
CES
SOR
GC
X2-2
DIS
PEN
LO
GO
_ON
ES(
0-2)
ED
(0-7
)
ER
XW
XEC
S A
E11
AD
11
AF2
5 L
OG
O_O
N
ES(
0-2)
ED
(0-7
)
ER
XW
XEC
S
AD
12,A
E12,
AD
13,A
E13,
AF1
4,A
D14
,AE1
5
AD
15,A
E16,
AD
16
AE1
1
AD
11
IC95
00[M
N85
064]
IMA
GE
PRO
CES
SOR
G
CX2
-1
GC
X2 G
PI0
SYS
TEM
B
US
GC
X2 G
PI0
SYS
TEM
B
US
G_L
EDST
BY
G1
BL_
ON
_IN
PUT
AE2
7
BL_
ON
_IN
PUT
AE2
7
HO
ST_S
CL
HO
ST_S
DA
HO
ST_S
CL
HO
ST_S
DA
AF7
AE7
AF7
AE7
GC
X2 I2
C
GC
X2 I2
C e
DP_
RX1
,CLK
RX0
,TX0
RX0
FR11
18,1
9,21
,22
24,2
5,27
,28
30,3
1,33
,34
36,3
7,39
,40
AJ1
1,A
H11
,AK
12,A
J12
AK
13,A
J13,
AJ1
4,A
H14
AK
15,A
J15,
AK
16,A
J16
AJ1
7,A
H17
,AK
18,A
J18
V-B
y-O
ne
V-B
y-O
ne 8
Lan
e
PNL_TEST_ON
AD
28 G
CX2
GPI
0
FR10
2,3,
5,6,
8,9
,11,
12
14,
15,1
7,18
20,2
1,23
,24
26,
27
V-B
y-O
ne 8
Lan
e V
-By-
One
AJ1
9,A
H18
VB1LOCKN, VB1HTPDN
VB
1LO
CK
N, V
B1H
TPD
N
VB
1LO
CK
N, V
B1H
TPD
N
PN
L_TE
ST_O
N
DD
R3
2 x
2G
bit
1 x
1Gbi
tIC
9550
IC95
51IC
9552
DD
R3
GC
X2_1
.5V
DD
R3
GC
X SP
I FLA
SH
GC
X SP
I FLA
SH
TO P
AN
ELTO
PA
NEL
GC
X2_3
.3V
GC
X2_2
_1.5
VG
CX2
_C2_
1.1V
GC
X2_1
8_33
V
GC
X2_3
.3V
GC
X2_1
.5V
GC
X2_C
_1.1
VG
CX2
_18_
33V
GC
X_XR
ST G
CX2
RES
ET A
F9
CS
SO
SI SC
K
G-S
PIH
Z
5
HO
ST_S
DA
1_I
NTE
R1
AE1
7
AD
171_
INTE
R0
AE1
8PO
DPV
SYN
C
AD
24PE
AK
S_G
PIO
AE2
2
GC
X2 L
ED
CN9300
2 4 65 7
CS
SO
SI
SC
K
G-S
PIH
Z
IC91
00SP
I FLA
SH
1 2 5 6
CS
SO
SI
SC
K8
GC
X2_3
.3V
PA9450
IC97
01D
C/D
C3
2G
CX2
_1.5
V
7D
CD
CEN
IC93
00D
C/D
C3
2G
CX2
_3.3
V
7D
CD
CEN
FR21
11
9 1
0
1,4
7 TO
A02
10
14
29
30
FR-BOARD
DIS
PEN
DIS
PEN
OEN
B
OEN
B
AF2
3O
ENB
OFF
RS_
DO
NE
16V
6
EVD
D_D
ET
11
9
13
GC
X2 L
ED
7PN
L_SO
S
31
,32;
34,3
537
,38;
40,4
143
,44;
46,4
749
,50
G2_
P1_R
X1,R
X0(P
,N)
G2_
P0_R
X1,R
X0,T
X1,T
X0(P
,N)
G2_
CK
27R
X(P,
N)
eD
P_R
X1,C
LKR
X0,T
X0
10
,11;
13,1
416
,17;
19,2
022
,23;
25,2
628
,29
TX0
TX0
RX0
HO
ST_S
CL
GC
X_XR
ST G
CX2
RES
ET A
F9
XEC
S9
11
,13,
15,1
719
,21,
23,2
5
ED(0
-7)
AD
12,A
E12,
AD
13,A
E13,
AF1
4,A
D14
,AE1
5
27,2
9,31
ES
(0-2
)
AD
15,A
E16,
AD
16
1_IN
TER
133
GC
X2 IN
TER
1_IN
TER
034
2_
INTE
R1
35
2_IN
TER
036
2_I
NTE
R1
AE1
7
AD
172_
INTE
R0
GC
X2 IN
TER
VOD
PVSY
NC
37
VO
DP
SYN
C
AE1
8PO
DPV
SYN
C V
OD
P SY
NC
PEA
KS_
GPI
O38
AD
24PE
AK
S_G
PIO
39
GPI
O8
AE2
6
DC
DC
5V41
IC97
00D
C/D
C
1712
,23,
26G
CX2
_C_1
.1V
14D
CD
CEN
10,1
5D
CD
C5V
IC97
51D
C/D
C3
2G
CX2
_2_1
.5V
7D
CD
CEN
IC97
50D
C/D
C
1712
,23,
26G
CX2
_C2_
1.1V
14D
CD
CEN
10,1
5D
CD
C5V
IC93
50R
eg5
GC
X2_1
8_33
V1
V-B
y-O
ne
AJ1
1,A
H11
,AK
12,A
J12
AK
13,A
J13,
AJ1
4,A
H14
AK
15,A
J15,
AK
16,A
J16
AJ1
7,A
H17
,AK
18,A
J18
AJ1
9,A
H18
CN9020
10,1
1
1 4,5
8,9
6,7
GC
X2_S
BI0
, SB
O0
PAN
EL_S
CL,
SDA
HO
ST_S
CL,
SDA
GC
X1_S
BI0
, SB
O0
GC
X2_3
.3V
AE1
0,A
D10
GC
X2 S
ERIA
L G
CX2
_SB
I0, S
BO
0
AE1
0,A
D10
GC
X2 S
ERIA
L G
CX1
_SB
I0, S
BO
0
GPI
O8
DD
R3
2 x
2G
bit
1 x
1Gbi
tIC
9650
IC96
51IC
9652
GC
X2_1
.5V
42
TEM
P-SE
NS_
SCL
43
44
AM
P_ST
BY
AM
P_XR
ST45
A
O1D
246
47
A
O1D
1A
O1D
048
A
O1L
RC
K49
50
A
O1B
CK
51
AO
1DA
CC
K
TEM
P-SE
NS_
SDA
8D
CD
CEN
PNL_TEST_ON
AD
28 G
CX
GPI
0 P
NL_
TEST
_ON
32 EVDD_DET
40 PNL_SOS
41 EVDD_ON
42 OFFRS_DONE
STB5.3V
BL_ON_INPUT
SOUND_SOSDETSOS_PSTCON_ON
SUB_ON
FR20
11
9 1
0
6 5
TO P
5
1
19-22
8
11
11-14
STB5.3V
G_LEDSTBY
SUB_ONTCON_ONSOS_PS 2
G1
EVDD_ON PNL12V
F16V
16V
IC49
02[C
1AB
0000
3984
]A
UD
IO A
MP
8 7 6 5
9,1
625
,32
10,
11
14,
15
26,
27
30,
31
L- L+R+ R-
F16V
SP_L SP_R
A12
B 1 2 3 4
IC49
01[C
1AB
0000
3984
]A
UD
IO A
MP
8 7 6 5
9,1
625
,32
10,
11
14,
15
26,
27
30,
31
F16V
5 6 7
WoR
+
WoR
-
WoL
-
WoL
+ 8
WoL WoR
DC
DC
IN
IC49
03[C
1AB
0000
3984
]A
UD
IO A
MP
8 7 6 5
9,1
625
,32
10,
11
14,
15
26,
27
30,
31
F16V
5 6 7
WoR
+
WoR
-
WoL
-
WoL
+ 8
Tw L Tw R
AO
1DA
CC
K
AO
1BC
K
AO
1LR
CK
AO
1D0
AO
1D1
AO
1D2
17 18 24 17 18 24 17 18 24
AM
P_ST
BSO
UN
D_S
OSD
ETA
MP_
XRST
IC49
04TE
mp.
Sen
sor 4,
5
6 1
GCX2_3.3V
FR50 1
2
TO P
N50
5
16V
4
DCDC5V
TEMP_SENS_SDA
TEMP_SENS_SCL
IC40
00IC
Con
t.8
5G
CX2
_3.3
V
6
38
39 PANEL_SCL
PANEL_SDA
4
TC
ON
_SD
A3
T
CO
N_S
CL
23
TCON_SDA
TCON_SCL
3D
CD
CEN
G_LEDSTBY 4
32
-
Block Diagram (3/3)
GK-BOARD
GK
1
SW2855
SW2854
SW2853
SW2852
SW2851
KEY
3
TO A10
TO F
R50
S-BOARD
PN-BOARDS1 2
TO A10
TO A
10
K-BOARD
K10
23457
1
STBY 3.3V
SUB3.3V
DCDC5V
DCDC5V
RM2800
VCC OUT
SN2800AI
2
4
VCC
OUT
D2802R G
REMOTE
TMP_SENS_SDA
TMP_SENS_SCL AI
G LED
R LEDSUB3.3V
AI
STBY 3.3V
STBY 3.3V
R LED
G LED
REMOTE
SW2857
POW
ER_O
N
IC5901Reg
5T3.3V
IC5900TEMP SENS
1
56
1
PN50
2
45
33
-
Parts Location
4
5
3
1
9
10
(SWI)
44
13
50
51
52
46
47
48
49
45
14
15 SCREW THEC257J /8 pcs/
34
-
Parts Location
56
AC Cord Cover
2730
18
1916
FK201
55
FK202
31
23
Screw XTV3-8GFJK
FK213
FK210
FK203
FK211 FK214 FK215 FK212
FK216 FK217
FK218 FK220 FK219
FK206
FK207 FK208
FK209
Back side
Screw XTV3-8GFJK
23
55
35
-
Parts Location
LED panel Assy
LED Panel Assy
64
68
24
Bluetooth MODULE ASSY
Bluetooth Module Assy
12
34
Bottom Cover Assy
Bottom Cover Assy
17
33
21
356 6 36
Control Button Assembly
20 69
22
Control Button Assembly
28
GK_PCB
32
36
-
Parts Location
11
57
8
7
25
26
29 29 37 67 3737 65 66 37
82
63
60
58 5961
Back Side of Heatsink A-FR Bottom
Back Side of A-PCB
Screw THEJ036J /6pcs/
62
37
-
Location of Lead Wiring
A20
WIFI
2
A16FR15
53
A15FR16
74 54
FR20P5
70
P6
CN5
71 72
P7
CN11
S1
73
CON
A02FR21
A10
BT K10
GK1
75
FR10
CN6
76
CN10
77
FR11
FR13
78
FR50
PN50
79
P21 P11
80
P23
81
P13
38
-
Packing Structure
38
39
40
41
42
43
Cosmetic Cover Assy
TV Set
Pedestal Assy
39
-
Replacement Parts List Note Note: All parts except parts mentioned [PAVCCZ] in the Remarks column are supplied by AVC-CSPC. Parts mentioned [PAVCCZ] are supplied by PAVCCZ. Notice: Be sure to make your orders of replacement parts according to this list. RTL (Retention Time Limited) Note: The marking (RTL) indicates that the Retention Time is Limited for this item. After the discontinuation of this assembly in production, the item will continue to be available for a specific period of time. The retention period of availability is dependant on the type of assembly, and in accordance with the laws governing part and Abbreviation of part name and description 1. Resistor 2. Capacitor Example: Example: ERD25TJ104 C 100KOHM J 1/4W ECKF1H103ZF C 0.01UF Z 50V Type Allowance Type Allowance
Type Allowance
C : Carbon D :0.5% F : Fuse F :1% M : Metal Oxide G :2% Metal Film J :5% S : Solid K :10% W : Wire Wound M :20%
Type Allowance
C : Ceramic C :0.25pF E : Electrolytic D :0.5pF P : Polyester F :1pF Polypropylene G :3pF T : Tantalum J :5pF K :10pF L :15pF M :20pF P :+100%, -0% Z :+80%, -20%
40
-
Model No. : TX-65CZ950E TX-65CZW954 TX-65CZR950 TX-65CZC954 Parts List
Change Safety Ref. No. Part No. Part Name & Description Q'ty Remarks
1 BAT-C-0109 BATTERY COVER OF RC 1 PAVCCZ 2 K1HY05YY0184 USB CABLE 1 PAVCCZ 3 K1HY20YY0016 SCART CABLE 1 PAVCCZ
4 K2CL2YY00020 AC CORD 1 (TX-65CZ950E,TX-65CZR950,TX-65CZW954) PAVCCZ4 K2CR2YY00070 AC CORD (SWI) 1 (TX-65CZC954) PAVCCZ
5 K2KYYYY00227 AV CABLE 1 PAVCCZ 6 L0AA02B00007 TWEETER 2 PAVCCZ 7 L0EYBB000005 SPEAKER L 1 PAVCCZ 8 L0EYBB000006 SPEAKER R 1 PAVCCZ 9 N2QAYA000109 REMOTE CONTROL 1 PAVCCZ
10 N2QBYA000018 TOUCH PAD REMOTE CONTROL 1 PAVCCZ11 N5HBZ0000109 WIFI DONGLE 1 PAVCCZ12 N5HZZ0000130 BLUETOOTH DONGLE 1 PAVCCZ
13 N5ZZ00000284 3D GLASSES 1 PAVCCZ 14 TBL0E01421 PEDESTAL ASSY 1 PAVCCZ 15 TBL0E91101 STAND POLE 4 PAVCCZ
16 TBM0EC3801 MODEL LABEL 1 (TX-65CZ950E) PAVCCZ16 TBM0EC3821 MODEL LABEL 1 (TX-65CZW954) PAVCCZ16 TBM0EC3841 MODEL LABEL 1 (TX-65CZC954) PAVCCZ16 TBM0EC3851 MODEL LABEL 1 (TX-65CZR950) PAVCCZ
17 TBM0EU0411 POWER BUTTON INDICATION LABEL 1 PAVCCZ 18 TBM0EU0431 SIDE INDICATION LABEL 1 PAVCCZ 19 TBM0EU0441 BOTTOM INDICATION LABEL 1 PAVCCZ 20 TBM0EU0451 CONTROL BUTTON LABEL 1 PAVCCZ 21 TBX0E88000 POWER BUTTON 1 PAVCCZ 22 TBX0E88100 CONTROL BUTTON 1 PAVCCZ 23 TES0E107 SPRING MAGNET HOLDER 12 PAVCCZ 24 TKK0E93011 LED PANEL 1 PAVCCZ 25 TKP0EA03601 BOTTOM AV BRACKET 1 PAVCCZ 26 TKP0EA03701 SIDE AV BRACKET 1 PAVCCZ
27 TKP0EA03801 AC CORD COVER 1 PAVCCZ 28 TKP0EA03901 CONTROL BUTTON BRACKET 1 PAVCCZ 29 TKP5ZA52801 SP BRACKET UPPER 6 PAVCCZ
30 TKRA51702 BC HANDLE (BLACK) 2 PAVCCZ31 TKU0EC01701 REAR COVER 1 PAVCCZ32 TKU0EC01801 BOTTOM COVER 1 PAVCCZ
33 TMW0E9011 S-PCB HOLDER 1 PAVCCZ 34 TMX0EE0011 LED PANEL CASE 1 PAVCCZ 35 TMZ0E9928 SOUND REFLECTOR L 1 PAVCCZ 36 TMZ0E9929 SOUND REFLECTOR R 1 PAVCCZ 37 TMZ0E9930 STAND BRACKET 4 PAVCCZ
38 TPC0EA32901 CARTON TOP 1 PAVCCZ 39 TPC0EA33001 CARTON BOTTOM 1 PAVCCZ 40 TPD0E13991 CUSHION TOP 1 PAVCCZ 41 TPD0E23961 CUSHION BOTTOM 1 PAVCCZ 42 TPD0E51001 CUSHION FRONT 1 PAVCCZ 43 TPD0E51011 CUSHION REAR 1 PAVCCZ 44 TPZ0E1010 ACCESSORIES BOX TOP 1 PAVCCZ 45 TPZ0E1020 ACCESSORIES BOX BOTTOM 1 PAVCCZ 46 TPZ0E1030 3D GLASSES BOX 1 PAVCCZ 47 TPZ0E1040 REMOTE CONTROLLER BOX 1 PAVCCZ 48 TPZ0E1050 TOUCH PAD CONTROLLER BOX 1 PAVCCZ 49 TPZ0E1060 PARTITION A 1 PAVCCZ 50 TPZ0E1070 REMOTE CONTROLLER PARTITION 1 PAVCCZ 51 TPZ0E1080 TOUCH PAD CONTROLLER PARTITION 1 PAVCCZ 52 TPZ0E1090 PARTITION B 1 PAVCCZ 53 TSCKF0170193 FFC (51PIN) 1 PAVCCZ 54 TSCKF0630057 FFC (51PIN) 1 PAVCCZ 55 TSMD009 MAGNET 12 PAVCCZ 56 TTP0E0123 COSMETIC COVER ASSY 1 PAVCCZ 57 TUC0EJ50201 HEATSINK A-FR BOTTOM 1 PAVCCZ
41
-
Model No. : TX-65CZ950E TX-65CZW954 TX-65CZR950 TX-65CZC954 Parts List
Change Safety Ref. No. Part No. Part Name & Description Q'ty Remarks
58 TUC0EJ50211 HEATSINK FR TOP 1 PAVCCZ 59 TUC0EJ50221 HEATSINK FR TOP FIN 1 PAVCCZ 60 TUC0EJ50231 HEATSINK A TOP 1 PAVCCZ 61 TUC5ZJ51411 HEATSINK A-REAR 1 PAVCCZ 62 TUC5ZJ51711 HEATSINK PRO5 1 PAVCCZ 63 TUX0EX0071 WIFI METAL 1 PAVCCZ 64 TUX0EX0081 BT METAL 1 PAVCCZ 65 TUX0EX0091 FAN METAL 1 PAVCCZ 66 TUX0EX0101 VESA METAL LEFT 1 PAVCCZ 67 TUX0EX0111 VESA METAL RIGHT 1 PAVCCZ 68 TUX0EX0121 K-PCB METAL 1 PAVCCZ 69 TUX0EX0131 GK-PCB METAL 1 PAVCCZ 70 TXJ/P5RNVE FR20-P5 WIRE 1 PAVCCZ 71 TXJ/P6RNVE-1 P6-CN5 WIRE 1 PAVCCZ 72 TXJ/P7RNVE P7-CN11 WIRE 1 PAVCCZ 73 TXJ/S1RNVE S1-CON WIRE 1 PAVCCZ 74 TXJA02RNVE A02-FR21 WIRE 1 PAVCCZ 75 TXJA10RNVE A10-K10/BT/CON(S1)/GK1 WIRE 1 PAVCCZ 76 TXJF10RNVE FR10-CN6 WIRE 1 PAVCCZ 77 TXJF11RNVE FR11-CN10 WIRE 1 PAVCCZ 78 TXJF13RNVE FR13-SP WIRE 1 PAVCCZ 79 TXJF50RNVE FR50-PN50 WIRE 1 PAVCCZ
80 TXJP11RNVE P11-P21 WIRE 1 PAVCCZ 81 TXJP13RNVE P13-P23 WIRE 1 PAVCCZ
82 TZLP018RNVE OLED PANEL 1 PAVCCZ R03UE/2SA BATTERY 4 PAVCCZ TBM0EU0421 POWER BUTTON STICKER 1 PAVCCZ TBM4GU113 COVER LABEL 1 PAVCCZ THEC1509 SCREW 18 PAVCCZ THEC257J SCREW 8 PAVCCZ THEJ024 SCREW 16 PAVCCZ THEJ036J SCREW 48 PAVCCZ THTD037J SCREW M3X10 7 PAVCCZ TPDX0033 JOINT 4 PAVCCZ TPE0E4006 SET BAG 1 PAVCCZ TPE0E4097 SET BAG 1 PAVCCZ TQB0E2514 PRODUCT FICHE 1 (TX-65CZ950E) PAVCCZ
TQB0E2514A INSTRUCTION BOOK (GERMAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514B INSTRUCTION BOOK (DUTCH) 1 (TX-65CZ950E) PAVCCZTQB0E2514C INSTRUCTION BOOK (ITALIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514D INSTRUCTION BOOK (FRENCH) 1 (TX-65CZ950E) PAVCCZTQB0E2514E INSTRUCTION BOOK (SPANISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514F INSTRUCTION BOOK (SWEDISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514G INSTRUCTION BOOK (NORWEGIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514H INSTRUCTION BOOK (FINNISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514I INSTRUCTION BOOK (LITHUANIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514J INSTRUCTION BOOK (PORTUGUESE) 1 (TX-65CZ950E) PAVCCZTQB0E2514K INSTRUCTION BOOK (DANISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514M INSTRUCTION BOOK (BULGARIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514N INSTRUCTION BOOK (ROMANIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514O INSTRUCTION BOOK (LATVIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514P INSTRUCTION BOOK (POLISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514Q INSTRUCTION BOOK (HUNGARIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514R INSTRUCTION BOOK (CZECH) 1 (TX-65CZ950E) PAVCCZTQB0E2514S INSTRUCTION BOOK (GREEK) 1 (TX-65CZ950E) PAVCCZTQB0E2514T INSTRUCTION BOOK (TURKISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514U INSTRUCTION BOOK (ENGLISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514V INSTRUCTION BOOK (CROATIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514W INSTRUCTION BOOK (SLOVAKIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514Z INSTRUCTION BOOK (ESTONIAN) 1 (TX-65CZ950E) PAVCCZ
TQB0E2551 PRODUCT FICHE 1 (TX-65CZC954,TX-65CZW954) PAVCCZTQB0E2551A INSTRUCTION BOOK (GERMAN) 1 (TX-65CZC954,TX-65CZW954) PAVCCZ
42
-
Model No. : TX-65CZ950E TX-65CZW954 TX-65CZR950 TX-65CZC954 Parts List
Change Safety Ref. No. Part No. Part Name & Description Q'ty Remarks
TQB0E2551C INSTRUCTION BOOK (ITALIAN) 1 (TX-65CZC954,TX-65CZW954) PAVCCZTQB0E2551D INSTRUCTION BOOK (FRENCH) 1 (TX-65CZC954,TX-65CZW954) PAVCCZTQB0E2551L INSTRUCTION BOOK (RUSSIAN) 1 (TX-65CZC954,TX-65CZW954) PAVCCZTQB0E2651L INSTRUCTION BOOK (RUSSIAN) 1 (TX-65CZR950) PAVCCZ
TQF0EA849 ENERGY LABEL 1 (TX-65CZ950E,TX-65CZC954,TX-65CZW954) PAVCCZ XTV3+8GFJK SCREW 23 PAVCCZ XYN3+F8FJ SCREW 21 PAVCCZ XYN4+F14FNK SCREW(PEDESTAL) 8 PAVCCZ AL301 TEWF484 AL-PET TAPE(W3XL40XT0.085) 1 PAVCCZ AL302 TEWF483 AL TAPE(W10XL20XT0.05) 1 PAVCCZ AL303 TEWF138 AL-PET TAPE(W10XL30) 1 PAVCCZ AL304 TEWF138 AL-PET TAPE(W10XL30) 1 PAVCCZ CK301 TMME380 CLAMPER 1 PAVCCZ CK302 TMME268 CLAMPER 1 PAVCCZ CK303 TMME268 CLAMPER 1 PAVCCZ CK304 TMME268 CLAMPER 1 PAVCCZ CK306 TMME268 CLAMPER 1 PAVCCZ CK307 TMME343 CLAMPER 1 PAVCCZ CK308 TMME343 CLAMPER 1 PAVCCZ CK309 TMME343 CLAMPER 1 PAVCCZ CK310 TMME343 CLAMPER 1 PAVCCZ CK311 TMM16497-1 CLAMPER 1 PAVCCZ CK312 TMM16497-1 CLAMPER 1 PAVCCZ CK313 TMM16497-1 CLAMPER 1 PAVCCZ CK314 TMM15414-2 CLAMPER 1 PAVCCZ CK315 TMME415 SPACER 1 PAVCCZ CK316 TMME415 SPACER 1 PAVCCZ CK317 TMME415 SPACER 1 PAVCCZ CK318 TMME415 SPACER 1 PAVCCZ CK319 TMME415 SPACER 1 PAVCCZ CK320 TMME415 SPACER 1 PAVCCZ CK321 TMME415 SPACER 1 PAVCCZ CK322 TMME415 SPACER 1 PAVCCZ FK201 TMK0EA192 FELT(75X8XT0.5) 1 PAVCCZ FK202 TMK0EA352 FELT(10X10XT0.55) 1 PAVCCZ FK203 TMK0EA352 FELT(10X10XT0.55) 1 PAVCCZ FK204 TMK0EA084 FELT(75X12XT0.5) 1 PAVCCZ FK205 TMK0EA084 FELT(75X12XT0.5) 1 PAVCCZ FK206 TMK0EA146 FELT(15X20XT0.5) 1 PAVCCZ FK207 TMK0EA146 FELT(15X20XT0.5) 1 PAVCCZ FK208 TMK0EA146 FELT(15X20XT0.5) 1 PAVCCZ FK209 TMK0EA146 FELT(15X20XT0.5) 1 PAVCCZ FK210 TMK0EA177 FELT(270X10XT0.5) 1 PAVCCZ FK211 TMK0EA274 FELT(5X110XT0.5) 1 PAVCCZ FK212 TMK0EA274 FELT(5X110XT0.5) 1 PAVCCZ FK213 TMK0EA274 FELT(5X110XT0.5) 1 PAVCCZ FK214 TMK0EA419 FELT(20X10XT0.45) 1 PAVCCZ FK215 TMK0EA419 FELT(20X10XT0.45) 1 PAVCCZ FK216 TMK0EA419 FELT(20X10XT0.45) 1 PAVCCZ FK217 TMK0EA419 FELT(20X10XT0.45) 1 PAVCCZ FK218 TMK0EA433 FELT(250X10XT0.45) 1 PAVCCZ FK219 TMK0EA433 FELT(250X10XT0.45) 1 PAVCCZ FK220 TMK0EA433 FELT(250X10XT0.45) 1 PAVCCZ FK301 TMKK577 RUBBER (30X30X1) 1 PAVCCZ FK302 TMKK584 THERMAL CONDUCTIVE SHEET 1 PAVCCZ FK303 TMKK399 HEAT RUBBER (27X27XT3) 1 PAVCCZ FK304 TMKK399 HEAT RUBBER (27X27XT3) 1 PAVCCZ FK305 TMKK399 HEAT RUBBER (27X27XT3) 1 PAVCCZ FK306 TMKK399 HEAT RUBBER (27X27XT3) 1 PAVCCZ FK307