mola-yudego et al, 2014 (1)

7/24/2019 Mola-Yudego Et Al, 2014 (1)

1/10

See discussions, stats, and author profiles for this publication at: http://www.researchgate.net/publication/257140833

Spatial analysis of the wood pellet productionfor energy in Europe

ARTICLE in RENEWABLE ENERGY MARCH 2014

Impact Factor: 3.36 DOI: 10.1016/j.renene.2013.08.034

CITATIONS

3

DOWNLOADS

210

VIEWS

578

3 AUTHORS:

Blas Mola-Yudego

University of Eastern Finland

65PUBLICATIONS 379CITATIONS

SEE PROFILE

Mari Selkimki

University of Eastern Finland


SEE PROFILE

Jos Ramn Gonzlez Olabarria

CTFC Forest Sciences Centre of Catalonia


SEE PROFILE

Available from: Blas Mola-Yudego

Retrieved on: 12 September 2015
http://www.researchgate.net/profile/Jose_Olabarria?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_4http://www.researchgate.net/profile/Jose_Olabarria?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_4http://www.researchgate.net/institution/University_of_Eastern_Finland?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_6http://www.researchgate.net/profile/Blas_Mola-Yudego?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_5http://www.researchgate.net/institution/University_of_Eastern_Finland?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_6http://www.researchgate.net/profile/Mari_Selkimaeki?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_5http://www.researchgate.net/?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_1http://www.researchgate.net/profile/Jose_Olabarria?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_7http://www.researchgate.net/institution/CTFC_Forest_Sciences_Centre_of_Catalonia?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_6http://www.researchgate.net/profile/Jose_Olabarria?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_5http://www.researchgate.net/profile/Jose_Olabarria?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_4http://www.researchgate.net/profile/Mari_Selkimaeki?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_7http://www.researchgate.net/institution/University_of_Eastern_Finland?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_6http://www.researchgate.net/profile/Mari_Selkimaeki?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_5http://www.researchgate.net/profile/Mari_Selkimaeki?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_4http://www.researchgate.net/profile/Blas_Mola-Yudego?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_7http://www.researchgate.net/institution/University_of_Eastern_Finland?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_6http://www.researchgate.net/profile/Blas_Mola-Yudego?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_5http://www.researchgate.net/profile/Blas_Mola-Yudego?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_4http://www.researchgate.net/?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_1http://www.researchgate.net/publication/257140833_Spatial_analysis_of_the_wood_pellet_production_for_energy_in_Europe?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_3http://www.researchgate.net/publication/257140833_Spatial_analysis_of_the_wood_pellet_production_for_energy_in_Europe?enrichId=rgreq-c7d2f5c0-2d08-41c8-ac32-5287f6ea2bf1&enrichSource=Y292ZXJQYWdlOzI1NzE0MDgzMztBUzo5NzE5Njc5NjAyMjc5OEAxNDAwMTg0OTMwNjMy&el=1_x_2

7/24/2019 Mola-Yudego Et Al, 2014 (1)

2/10

This article appeared in a journal published by Elsevier. The attached

copy is furnished to the author for internal non-commercial research

and education use, including for instruction at the authors institution

and sharing with colleagues.

Other uses, including reproduction and distribution, or selling or

licensing copies, or posting to personal, institutional or third partywebsites are prohibited.

In most cases authors are permitted to post their version of the

article (e.g. in Word or Tex form) to their personal website or

institutional repository. Authors requiring further information

regarding Elseviers archiving and manuscript policies are

encouraged to visit:

http://www.elsevier.com/authorsrights
http://www.elsevier.com/authorsrightshttp://www.elsevier.com/authorsrights

7/24/2019 Mola-Yudego Et Al, 2014 (1)

3/10

Author's personal copy

Spatial analysis of the wood pellet production for energy in Europe

Blas Mola-Yudego a,b,*, Mari Selkimki a, Jos Ramn Gonzlez-Olabarria c

a University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI 80101 Joensuu, Finlandb Swedish University of Agricultural Sciences (SLU), Department of Crop Production Ecology, P.O. Box 7016, S-750 07 Uppsala, Swedenc Forest Science Centre of Catalonia, Ctra St. Llorenc de Munys, Km 2, ES-25280 Solsona, Spain

a r t i c l e i n f o

Article history:

Received 5 March 2013Accepted 19 August 2013Available online 25 September 2013

Keywords:

Pellet tradeBioenergyKernel modelsSupplyEnergyBioenergy

a b s t r a c t

The distribution of the wood pellet plants in Europe was analysed using a geo-statistical kernel basedapproach, in order to identify and dene cluster-regions with high concentration of pellet productioncapacity. For that, a database with the location of pellet plants, as well as its capacity, was constructed,identifying 378 pellet plants with annual capacities over 1000 t, and an aggregated production of 11.5million t. The geo-statistical methods facilitated the analysis of the plants with regards to their marketposition at global and local level.

At a European level, four main production areas were identied, dened as: Central Europe (Bavaria,Austria, and neighbouring areas of France, Switzerland and Italy), Scandinavia, Finland, and theBaltic. These areas concentrated over 50% of the pellet production, although presented differentcharacteristics regarding market establishment and development, their role in the global pellet trade andtheir raw material availability. The paper provides with methodological tools to identify and characterisethe main pellet production areas in Europe that can have further economic and policy applications.

2013 Elsevier Ltd. All rights reserved.

1. Introduction

In recent years, pellets have become an important fuel in heatand power production across Europe. Pellets are considered to be acompetitive fuel option since the higher fuel density translates in areduction in the transportation and storage costs, and this advan-tage can be used in areas where cost efcient supply is a challengedue to storing and long transportation distances. In addition, theypresent lower moisture content in comparison with unprocessedbiomass higher effective heating value and uniform shape, and aclear burning and reduction of ashes. Finally, they are easy to betransported and stored and can be obtained from different feed-stocks being therefore adaptable to different locations with alter-native raw materials for biomass[1].

These advantages have led to an increase in pellet trade, asdomestic markets have increased the use of high quality pelletsresulting in a rise in the demand that often is fullled throughimports[2e4]. Investment subsidies and other national incentiveshave been the driving forces for the development of domestic pelletmarkets, as pellets heating systems are considered an essentialcomponent of European plans to reduce GHG emissions and are

targeted by incentive programs in countries such as Germany,Norway, Sweden or Austria[3]. Similarly, in Denmark (one of theforerunners in wood pellet use), large scale pellet combustionbecame an issue in order to meet the renewable energy targets by2020 set by the European Union[5].

However, the supply of raw material, the availability of skilledmanpower, the capacity to adapt to new technological challenges, asufcient demand of a product from local markets, and the pres-ence of investors, are also requirements that should be fullled tosuccessfully establish a new transformation industry such as thepellet production. The presence of the these factors, together withthe possibility to capture investment subsidies and the capacity toconsolidate a growing market by ensuring the supply of pellets,could explain the potential aggregation of pellet transformationindustries in pellet production cores. The uneven spatial distribu-tion of economic activities of diverse nature has been studied andveried for a long time (e.g. Refs. [6,7]). By identifying andmeasuring the agglomeration patterns of an economic activity,such as the pellet production, notonly would be possible to providea description of the actual situation of the pellet production sectorin Europe, but to establish the framework for future analysis aboutthe pulling forces causing that agglomeration.

In thiscontext, the aim of thispaper isto dene the pellet supplyareas in Europe based on extensive data on the location and pro-duction capacity of the pellet plants. To do that, the paper in-vestigates the application of a geostatistical approach based in

* Corresponding author. University of Eastern Finland, School of Forest Sciences,P.O. Box 111, FI 80101 Joensuu, Finland. Tel.: 358 50 4422974.

E-mail addresses:blas.mola@uef.,[email protected](B. Mola-Yudego).

Contents lists available atScienceDirect

Renewable Energy

j o u r n a l h o m e p a g e : w w w . e l s e v i e r . c o m/ l o c a t e / r e n e n e

0960-1481/$ e see front matter 2013 Elsevier Ltd. All rights reserved.http://dx.doi.org/10.1016/j.renene.2013.08.034

Renewable Energy 63 (2014) 76e83

7/24/2019 Mola-Yudego Et Al, 2014 (1)

4/10


kernel methods in order to dene, if possible, core areas from thepattern of geographical concentration of the pellet production atvarious spatial levels in order to better describe those areas and itspossible applications for market analysis.

2. Material and methods

2.1. Inventory of pellet capacity

An inventory of capacity was performed for the countries ana-lysed, including the capacity and location of the pellets plants. Theinventory aimed to be exhaustive. The location of the plants wasbased on different accounts of pellet producers, complementedandupdated by using the companieshomepages and the companiesofcial nancial reports. The accounts included the databases ofpellet plants for Sweden[8], Finland[9], Austria and Germany[10]and the rest of Europe [11,12]. Additional sources of informationwere based on existing scientic literature, companys nancialsummaries, and companies homepages. The collection of infor-

mation involved in some cases direct contacts with pellet pro-ducers and pellet associations in some of the countries studied. Thelocation of the pellet plants was geo-referred, using their preciselocation or the closest urban centre, the last when the preciselocation of the plant was not available.

Only pellet plants with capacities over 1000 t a1 were includedin the database in order to facilitate the data collection. In case thatthe pellet plant capacity was not available, but there was infor-mation about the location of the pellet plant and data on thecompany suggesting a signicant pellet production, then anaverage value was attributed to the plant in order to minimise anypotential bias in the denition of the areas.

2.2. Geo-statistical methods

The analysis of the location of the pellet factories was based ongeospatial kernels. This approach is a non-parametric method forthe estimation of the spatial distribution of probabilities of occur-rence based on a pool of observed events. For a spatial region, acontinuous grid is rst created, and the probability of occurrence ofa specic event for all the points of the grid is calculated, creating adensity function according to the number and distance of the pelletplants.

The kernel function was used in this study to calculate theprobability of occurrence of a pellet plant, and the geo-spatial ag-gregation of pellet capacity in a given area, using:

f^

x 1

nh2

Xn

i 1

Kui (1)

ui x xi

h (2)

where x is the vector of coordinates of a given location, K is thekernel function used, h is the bandwidth radius, which affects thedispersion of the density function andXi is the vector of coordinatesof the i observed pellet plants: therefore xeXiis the distance be-tween a point where the density function is to be estimated andeach of the observed pellet plants used to dene the density areas.

The variables used were the Universal Transverse Mercator(UTM) coordinates of the pellet plants, The calculations were basedon the spatial statistic package SPlancs[13]adapted for R [14]to

estimate the probability densities. A quartic kernel function with axed bandwidth was applied, considering a method for correctingthe border effect based on Diggle[15]and Berman and Diggle[16].

By this means, the factories at the bordering areas are not over-represented. In addition, the pellet plants were weighted by theirproduction capacity.

The bandwidth radiusdetermines the level of aggregation of thedata in the density function, and signicantly affects the nal

outcome [17,18]. Although there is not a broadly accepted meth-odology to determine the optimal radius, as it also depends of thepurpose of the mapping[17,19], a common method is an ad hocchoice, referringhto a parameter[18]. In this study, the parameterof reference (h100) was calculated according to Worton [20]andused to aggregate the probabilities of pellet plant occurrence atlocal or global level by using different proportions of h100. There-fore, it was used h80, h40 and h20 corresponding to the 80%, 40%and 20% of the h100 value used to dene the radius of search.

To analyse the resulting kernel estimations, raster maps withstandardised isopleths were created. The isopleths were based onpercent volume contours (PVC), in order to compare areas deninga high concentration of pellet production capacity. The PVCs denethe volumes under the utilisation distribution, and represent adened percentage of the total pellet capacity in the smallestpossible area. For instance, the isopleths containing the 10thpercentile area shows the areas with the highest concentration ofpellet production, since it represents the smallest possible area tocontain 10% of the pellet capacity in Europe(i.e. the core productionarea). On the other hand, the 90th percentile area represents thelowest concentration, since it contains almost the total pellet ca-pacity. In this study, we assume that this line denes the supplymarket for pellet production. The resulting maps were presentedusing a 150 150 grid cells resolution.

Finally, the maps and the calculated PVCs were used to identifyand characterise the main pellet production markets in Europe,dened as continuous geographic areas with large shares of pelletcapacity. For those areas, additional parameters concerning landuses [21] and population [22] were calculated, as well as main

national indicators of pellet trade[23], in order to describe the areawith regard to potential raw material supply, potential demand,and current trade.

3. Results

After the inventory of pellet production plants was nalised, 378pellet plants were identied, capable of producing annually a totalof 11.5 million tonnes of pellets (Fig. 1).

Based on the estimation of the radius of reference (h100), equalto 231 km, the spatial distribution of the pellet occurrence proba-bility was estimated using h100 and h80 for dening globalagglomerations, and using h40 and h20 for dening local agglom-erations (Fig. 2).

Each plant was therefore classied according to the estimationof probability of occurrence for h20 and h80 (Fig. 3), dening acompetition index: plants with a high value for h20 are located inan area with a high concentration of pellet capacity at local level,and plants with a high value for h80 are located in areas with highconcentration of pellet capacity at European level. The highestvalue for h20 would correspond to pellet plants with a position oflocal dominance of the production market (risk of local monopoly),and the highest values for h80 would correspond to global domi-nance of the production market (risk of global monopoly).

Using this competition index, country averages were calculatedwith the average values of all the plants. In this case, high countryaverages for the h20 estimates implied that are few pellet plantsbut they concentrate most of the local production of pellets

(local dominance). This would be the cases of Portugal and theNetherlands. On the other hand, countries with high averages forh80 implied that those plants concentrate a large share of the pellet

B. Mola-Yudego et al. / Renewable Energy 63 (2014) 76e83 77

7/24/2019 Mola-Yudego Et Al, 2014 (1)

5/10


capacity at European level (global dominance), which would be thecase of Austria, Germany and Sweden (Fig. 4).

At European level, four main production areas were dened,based on the use of the PVC curves for the h100 and h80 scores(Fig. 5). Those were dened as: Central Europe(including Bavaria,Austria, and neighbouring areas of France, Switzerland and Italy),Scandinavia (including South and Central Sweden and parts ofDenmark), Finland(including mostly southern Finland), and theBaltic(including Estonia, Latvia and Lithuania).

The area dened as Central Europecovered about 25% of the

estimated total capacity (Table 1). This area has higher populationdensity than the remaining areas dened, and on the other hand,has a lower share of forest land. In total, this area includes over 70%of the total production capacity of Austria, Germany and Belgium(Table 2).

Finally, the area Central Europecombines exporter countrieslike Germany (Table 3) with net importers like Austria. The Balticand Finlandareas are clearly exporters, whereas the area Scan-dinaviais on average importing more than they produce.

4. Discussion

The identication of the European core areas for pellet pro-duction can be an important step in the eld of economic analysis

and energy policy. In the one hand it can facilitate the study of tradeows and the forecasts of the market. It can, as well, be the subjectof policy framework analysis that can explain why pellets are

produced in some areas and not in others. In this context, thepresent study provides both data and methods.

It must be stressed that there is still an important lack of ofcialstatistics on pellet production and trade, which makes difcult thestudy on the development of pellet markets [4]. Although theidentication and location of pellet plants was partly based onexisting databases, it required an important effort to standardiseand complete existing records in order to be exhaustive, and insome cases included the verication of the documented gures.The nal database included different number of plants and capacity

gures than other existing accounts (e.g. Pellet@las[12]included630 pellet producers and c. 8 million tonnes) which can be in partexplained by the decision of excluding small pellet plants, in orderto standardise the data, and by the inclusion of large plants missingin other accounts. Although those small producers excluded canbias some of the results (e.g. in Italy or Spain), it is assumed thatthose biases should be small since the calculations were weighted.Therefore, despite the number of small plants is numerically high,their actual share of the total capacity is negligible and would notsignicantly change the PVCs.

Our accounts reected the situation by 2008, when some plantscould already be under construction or starting activity. However,the methods presented are rather exible to update and do notassume any pre-dened distribution, allowing the denition of

new ranges and the identication of the areas where there is a highconcentration of pellet factories. Therefore they can incorporateany update in the location of new plants or changes in their

Fig. 1. Countries analysed and total number of pellet plants included in the study.

B. Mola-Yudego et al. / Renewable Energy 63 (2014) 76e8378

7/24/2019 Mola-Yudego Et Al, 2014 (1)

6/10


capacity (due to the continuous developments of the pellet pro-duction) as new core areas can be calculated if new data are pro-vided. The use of similar geostatistical techniques to deneproduction areas have been previously used to dene raw-materialproduction areas for bioenergy in Sweden [24] and for mapping the

aggregated centres of economic activity [25]revealing a high po-tential for analysis.

The use of alternative bandwidth radius to aggregate the ca-pacity presented many advantages. The reference parameter wasused tond general trends at a global level, and a shorter radius to

Fig. 3. Representation of the pellet plants according to their concentration (weighted probability of occurrence) at a global and local level (h80and h20, for left and right gures,

respectively).

Fig. 2. European pellet capacity aggregations for different values of the bandwidth radius of reference (h100 231 km). The indices represent percentages of this value (h20: 28 km,

h40: 128 km, h80: 185 km).


7/24/2019 Mola-Yudego Et Al, 2014 (1)

7/10


reveal locally clustered production areas. It is generally acceptedthat a bandwidth radius must be dened according to the nature ofthe study, and different methodologies have been proposed fromthe statistical point of view[20], although no general rules havebeen broadly adopted [17]. In our case, the use of a radius of

reference was based in the recommendations of Worton [20]grounded mostly on a statistical basis. However, this value wasscaled resulting of an aggregation radius over 250 km for generaltrends, and lower than 30 km for local concentration patterns,which was decided considering the protable thresholds for pellet

delivery[4]and the average transportation distance for wood chipmaterials[26]. By this means the resulting values can be used as amarket index: a pellet plant plants with high values of concentra-tion using shorter radius would imply that the local pellet capacity(e.g. for a municipality or county) is clustered, implying intensiveuseof raw materials, and has implications in the logistics associatedas well as in the expectedmarket developments. On the other hand,a plant presenting high values of concentration using a large radius(h100) means that is located in an area that concentrates a largeshare of the total pellet production, and is competing for the do-mestic market with other plants. In both cases, they reect areaswith a large domestic market or export oriented.

At a local scale, Portugal and Netherlands presented high valuesof concentration (h20). In both cases, their pellet markets are ofrecent development, they aredominated by oneor fewpellet plantswith large capacities, and they are somehow isolated from the mainproduction areas. Concerning raw materials, in both cases thereare clear limitations as the feedstock potential for the productionof wood pellets from domestic industry (Netherlands [27]) orfrom agricultural/forest residues is rather limited (Portugal [28]).There are some specic characteristics: Portugal has an annual

Fig. 5. Pellet capacity concentration in Europe for bandwidth radius of 231 km (h100, right). Dark areas concentrate 30% of the total pellet capacity estimated for Europe. Striped

areas concentrate 50% of the total capacity, and lighter areas would include 90% of the total capacity. Based on the higher concentrations, four main areas are de ned: A:Central

Europe, B: Scandinavia, C:Finland, D:Baltic.

Fig. 4. Country averages for the pellet plants analysed, for global and local concen-

tration indices (h20 and h80, respectively). The size of the circles represents the

countrys total pellet capacity.


7/24/2019 Mola-Yudego Et Al, 2014 (1)

8/10


production close to 100 000 t, and about 90% of the production isexported, as it lacks a domestic market[28]. The production in theNetherlands, on the other hand, is oriented to the domestic market,and about 95% of the pellets are co-red in large coal power plants[27].

At a global scale, we identi

ed four main areas that concentratemost of the pellet production in Europe: Central Europe, Scandi-navia, Finland and the Baltic. In general, these areas have beenleading the wayof pellet market development during the last years.Most of the countries included in these main areas carried outimportant efforts towards the implementation of a common qualitystandard in the production of pellets. In the area dened asCentralEurope these countries already had a quality standard for pellets[29], and in the area dened asScandinavia, Sweden developed itsown national standards[7,30]. More recently, most of the countriesenclosed in these areas have actively been implementing thecommon European standard (EN 14961-2) by 2011[30]. Since highquality pellets reduce the maintenance of the pellet boilers, com-mon standards contribute to provide condence tothe end users. Inthis sense, ensuring the fuel quality is a vital matter for establishinga strong market position.

In Central Europe we recognised a core area for pellet productionin the area of South Germany and Austria, and in both countriespellet markets are very well established: production and con-sumption of pellets are one of the highest in Europe. These coun-tries have in common that they produce enough pellets for thedomestic market and also for exportation[22,30]. In Austria, thecompanies in the pellet sector are well cooperated and they havehad a common aim to expand the pellet markets. The earlydevelopment of pellet quality standard (NORM M7135 standard)helped both the pellet producer as well as the boiler manufacturesto improve their products. Austria is also the only country which

has a standard to ensure the quality of pellets during transportation(NORM M7136) as well as quality criteria for wood pellet storages

in households (NORM M7137). In general, the public measureshave played an important role[31]and both state and provinceshave been subsidising the pellet heating system which compensatethe higher investment cost compared with e.g. oil heating system[32]. The efforts invested to pellet production, development ofboilers, transportation and storages as well as the policy supporthas resulted a very develop and dynamic pellet markets. In Ger-many, large part of the pellet producers are located in South andSoutheWest Germany, where there are high concentrations ofwood related industries and therefore raw material supply. Theproduction and the number of plants have increased, enough tocover the domestic demand of pellets and to export large shared.However, of the total pellet production capacity only about 60% wasin used in 2008, perhaps suggesting a market saturation that would

agree with the estimates of global and local concentration found inthis study for those years.

Concerning Scandinavia, Sweden is the largest producer andconsumer of wood pellets in the world [8,33]. In Sweden threefactors have been identied affecting the rapid development of thepellet industry: availability of raw materials, taxation systemfavourable to biofuels and extended district heating networks[32,34]. The number of small and medium scale producers is thehighest of all countries studied and many small scale wood pro-cessing industries process the residues to high quality pellets as thehigh price of pellets makes the investment protable even for smallentrepreneurs[35]. Since the sector of small scale pellet consumershas been growing and continues, the demand for high qualitypellets and pellets sold in small sacks has been growing, which

could have been one of the reasons boosting the number of smallscale producers. The number of small and medium scale pelletusers is expected to keep on growing in the near future, while the

Table 3

Countrys pellet exports and imports for the four main areas dened (103 t).

Zone Country To/from Export to Import from

CentralEurope

Germany Austria 90.9 49.1France 20.8 60.3

EU27 321.6 204.8 ExporterAustria CzechRepublic

0 66.0

Italy 124.4 0EU27 136.1 174.6 Importer

Switze rland Germany 1.5 22.6Italy 3.8 0EU27 5.6 43.6 Importer

Italy Austria 0.1 266.3Slovenia 1.5 57.2EU27 2.2 529.7 Importer

Baltic Estonia Denmark 208.6 0Latvia 1.0 95.1EU27 281.3 89.3 Exporter

Latvia Lithuania 1.0 2.9Sweden 66.5 0EU27 157.5 3.5 Exporter

Lithuania Denmark 32.4 0

Latvia 2.7 25.3EU27 62.6 24.3 Exporter

Scandinavia Sweden Finland 2.1 72.6Denmark 98.5 2.1EU27 102.9 373.4 Importer

Denmark Sweden 7.1 61.7Estonia 0 174.0EU27 9.7 689.1 Importer

Finland Finland Sweden 60.5 0.1Estonia 0 4.2EU27 125.2 6.6 Exporter

Table 1

Characterisation of the four main areas dened, according to their shares of thepellet capacity, their population and forest land covered.

Central Baltic Scandinavia Finland

N plants 69 18 72 18

% European plants 18 % 5 % 19 % 5 %Pellet capacity 2924 993 1975 834% European capacity 25 % 8 % 17 % 7 %

Population (hab.x106) 58.5 2.9 7.2 2.9Population density (hab. km2) 157.5 31.9 35.5 27.6

% Forest land 48 % 52 % 68 % 68 %

% Agriculture land 45 % 41 % 17 % 15 %

Total area (103 km2) 371.1 90.5 204.0 105.1

Table 2

Pellet capacity per country included in the main four areas dened. Countriesunderlined form the areas core.

Area Countries Capacity(103 t y1)

% (Countrytotal capacity)

Central Europe Austria 957 95%Germany 1388 74%Belgium 235 87%Switzerland 19 25%France 170 15%Italy 145 31%Slovenia 10 18%

Baltic Estonia 385 100%Latvia 14 9%Lithuania 514 88%

Scandinavia

Denmark 180 44%Sweden 1785 72%

Finland Finland 834 72%


7/24/2019 Mola-Yudego Et Al, 2014 (1)

9/10


number of large scale users is not expected to grow remarkably.Furthermore, it is possible that the large scale CHP-plants mightreplace part of the fuel pellets with forest residuals[36].

In Finland, there were 24 pellet plants operating in 2008, withve additional plants planned or being constructed[3], raising the

estimated production capacity of 1.16 million tons. The total pro-duction estimate for 2020 is 1.5 million tons of pellets which wouldrequire establishing new pellet plants or enlarging the existingplants [37]. As the area presents large forest resources and lowpopulation, the pellet market has been long time export orientedbut recently the domestic consumption has started to increase. Stillabout 58% of the total pellet production was exported in 2007,while in 2006 the share was 75% of the production [38]. Most of thepellet plants are medium or large scale producers, and only a fewsmaller producers exist on the markets. However, during the 2009the economic situation reduced the wood industry and saw millproduction which decreased the availability of raw materials. Thisled to the reduction in domestic pellet production down to299 000 t and the importation increased to 50 000 t [39].

Finally, the pellet market in the Baltic area has different char-acteristics compared with the rest of the marketareasrecognised. Inone hand, general,the pellet productionis quite new, started around2000 andit was theFinnish andSwedish companies that introducedthe pellet plants. However, in this case the pellet plants werefounded to full the need of pellet of the other countries nearby,mainly in Scandinavia, as a domestic market was not rmly estab-lished[40]. In addition, in all three countries there is a shortage ofraw materials due to the rapid establishment of the pellet plants inparallel to a reduction in the saw mill production, resulting in anincrease of raw material costs[33]. However, the region presents alarge share of forest lands and unutilised potentials for the provisionof wood energy[41]as well as for the establishment of fast growingplantations [42]that should secure the supply of raw materials ifproper technical and economic incentives are provided.

5. Conclusions

This is the rst study to the authors knowledge that analysesthe location and production gures of the wood pellet markets forenergy based on a geostatistical method. The methodology pro-posed helps to identify areas where pellet production is wellestablished, and provides indicators for market analysis. Furtheranalysis can be oriented in the evolution of the core areas alongtime linked to developments in the national policy framework. Themethods and data presented, complemented by additional vari-ables, can also be used in future research in order to study, at globallevel the trends in biofuel trade, and at local level, to dene optimalor expected locations for the establishment of future pellet plants.

Acknowledgements

Financial support for this project was provided by the FinnishCultural Foundation. Our gratitude to Prof Paavo Pelkonen, ProfLauri Sikanen, Dr Dominik Rser, Surya Magar and Robert Prinz forall their valuable cooperation and assistance.

References

[1] Thek G, Obernberger I. The pellet handbook: the production and thermalutilization of biomass pellets. London: Earthscan Ltd; 2010.

[2] Vinterbck J. Pellets 2002: the rst world conference on pellets. BiomassBioenergy 2004;27:513e20.

[3] Magelli F, Boucher K, Bi HT, Melin S, Bonoli A. An environmental impactassessment of exported wood pellets from Canada to Europe. Biomass Bio-energy 2009;33:434e41.

[4] Selkimki M, Mola-Yudego B, Rser D, Prinz R, Sikanen L. Present and futuretrends in pellet markets, raw materials, and supply logistics in Sweden andFinland. Renew Sust Energy Rev 2010;14:3068e75.

[5] Directive 2009/28/EC of the European Parliament and of the Council of 23April 2009 on the promotion of the use of energy from renewable sources andamending and subsequently repealing directives 2001/77/EC and 2003/30/EC.L 140/16-62. Off J Eur Union 2009.

[6] Hoover E. The measurement of industrial localization. Rev Econ Stat 1936;8:162e71.

[7] Bertinelli L, Decrop J. Geographical agglomeration: ellison and Glaesersindex applied to the case of Belgian manufacturing industry. Reg Stud2005;39:567e83.

[8] Selkimki M, Rser D. Pellet markets in Sweden. Vantaa: METLA Publications;2008. Retrieved at: (Dec 2008),www.pelletime..

[9] Sikanen L, Mutanen A, Rser D, Selkimki M. Pellet markets in Finland andEurope-an overview. Vantaa: METLA Publications; 2008. Retrieved at:(12.2008),www.pelletime..

[10] Prinz R, Gloning P, Rser D, Selkimki M, Mola-Yudego B. Pellet market, rawmaterials, handling and logistics in central Europe e an overview on the pelletsectors in Germany and Austria. Vantaa: METLA Publication; 2010.

[11] Ljungblom L. The pellets map 2007. Bioenergy Inter 2007;29:9e23.[12] Pellet@las. Market data base of Pellet@las project. Retrieved at: (Oct 2008),

http://www.pelletcentre.info; 2008.[13] Rowlingson B, Diggle P. Splancs: spatial point pattern analysis code in S-Plus.

Comput Geosci 1993;19:627e55. Original sources retrieved at: (Dec 2010),http://www.maths.lancs.ac.uk/wrowlings/Splancs/.

[14] Bivand R, Gebhardt A. Implementing functions for spatial statistical analysisusing the R language. J Geographical Syst 2000;3(2):307e17.

[15] Diggle P. A kernel method for smoothing point process data. J R Stat Soc SeriesC Appl Stat 1985;34:138e47.

[16] Berman M, Diggle P. Estimating weighted integrals of the second-order in-tensity of a spatial point process. J R Stat Soc Series B Stat Method 1989;51:81e92.

[17] Silverman BW. Density estimation for statistics and data analysis. London:Chapman and Hall; 1986.

[18] Worton BJ. Using Monte Carlo simulation to evaluate kernel-based homerange estimators. J Wildl Manag 1995;59:794e800.

[19] Brunsdon C. Estimating probability surfaces for geographical point data: anadaptive kernel algorithm. Comput Geosci 1995;21:877e94.

[20] Worton BJ. Kernel methods for estimating the utilization distribution inhome-range studies. Ecology 1989;70:164e8.

[21] EEA (European Environment Agency). Environment image & corine land cover2000 for Sweden. Retrieved at: (Nov 2005), http://dataservice.eea.eu.int/dataservice/; 2000.

[22] Center for International Earth Science Information Network (CIESIN),Columbia University;and Centro Internacional de Agricultura Tropical (CIAT).Gridded population of the world (GPW), version 3. Palisades, NY: CIESIN,Columbia University; 2005. Retrieved at: (Jul 2010), http://sedac.ciesin.columbia.edu/gpw.

[23] Eurostat. EU 27 trade since 1995 by CN 8. Eurostat; 2009. Retrieved at: (May2005), http://epp.eurostat.ec.europa.eu/portal/page/portal/external_trade/data/database.

[24] Mola-Yudego B, Gonzlez-Olabarria JR. Mapping the expansion and distri-bution of willow plantations in Sweden: lessons to be learned about thespread of energy crops. Biomass Bioenergy 2010;34:442e8.

[25] Gritten D, Mola-Yudego B, Delgado-Matas C, Kortelainen J. A quantitativereview of the representation of forest conicts across the world: resourceperiphery and emerging patterns. Forest Policy Econ 2012;33:11e20.http://dx.doi.org/10.1016/j.forpol.2012.06.008.

[26] Le Net E, Bajric F, Vtter D, Berg S, Anderson G, Roux S. Identication ofexisting transport methods and alternative methods or new approaches withdata about costs, labour input and energy consumption. European ForestInstitute (EFI); 2011. Technical report 76.

[27] Vivarelli F. Development and promotion of a transparent European pelletsmarket creation of a European real-time Pellets Atlas. Pellet market countryreport Portugal. ETA Renewable Energies; 2009. Retrieved at: (Feb, 2013),www.pelletsatlas.info.

[28] Junginer M, Sikkema R. Development and promotion of a transparent Euro-pean pellets market creation of a European real-time Pellets Atlas. Pelletmarket country report Netherlands. Utrecht University; 2009. Retrieved at:(Feb, 2013),www.pelletsatlas.info.

[29] Garca-Maraver A, Popov V, Zamorano M. A review of European standards forpellet quality. Renew Energy 2011;36:3537e40.

[30] Sikkema R, Steiner M, Junginger M, Hiegl W. Development and promotion of atransparent European pellets market. Creation of a European real-time PelletsAtlas. Final report on producers, traders and consumers of wood pellets.Vienna: HFA Holzforschung Austria; 2009. Retrieved at: (Feb, 2013), www.pelletsatlas.info.

[31] Lund PD. Effects of energy policies on industry expansion in renewable en-ergy. Renew Energy 2009;34:53e64.

[32] Egger C, hlinger C, Dell G. Wood pellets-tomorrows fuel. Renewable EnergyWorld; SeptembereOctober 2003. Retrieved at: (Nov, 2008), http://www.oekoenergie-cluster.at/OEC/leadmin/esv_les/Info_und_Service/Wood_Pellets_e.pdf.


7/24/2019 Mola-Yudego Et Al, 2014 (1)

10/10


[33] Peksa-Blanchard M, Dolzan P, Grassi A, Heinim J, Junginger M, Ranta T, et al.Global wood pellets markets and industry: policy drivers, market status andraw material potential. IEA Bionergy Task 2007;40.

[34] Hglund J. The Swedish fuel pellets industry: production, market and stan-dardization, vol. 14. Ume: Dept. of Forest Products, SLU. Examensarbeten(SLU, Faculty of Forest Sciences); 2008.

[35] Selkimki M, Prinz R, Mola-Yudego B, Prinz R. Pellet market, raw materials,

handling and logistics in Northern Periphery. PELLETime working papers ofthe Finnish Forest Research Institute, 157. Vantaa: METLA Publications; 2010.

[36] Nslund M. Pellet production and market in Sweden. In: Conference pre-sentation: energetic valorisation of forest biomass in the South Europe,Pamplona 2007.

[37] Hetemki L, Harstela P, Hynynen J, lvesniemi HI, Uusivuori J, editors. Suomenmetsiin perustuva hyvinvointi 2015-Katsaus Suomen metsalan kehitykseen

ja tulevaisuuden vaihtoehtoihin. Vantaa: METLA Publications; 2006. Workingpapers of the Finnish Forest Research Institute, 26.

[38] Ylitalo E, editor. Puun energiakytt 2007. Metstilastotiedote 15/2008.,Metstilastollinen tietopalvelu. Vantaa: METLA Publications; 2008 [inFinnish].

[39] Ylitalo E. Puupelletit. Metstilastotiedote 10/2010. Metsntutkimuslaitos,Metstilastollinen tietopalvelu. Vantaa: METLA Publications; 2010. Retrievedat: (Apr 2010), http://www.metla.?/tiedotteet/metsatilastotiedotteet/2010/puupelletit09.htm.

[40] Muiste M, Habicht M. Development and promotion of a transparent Europeanpellets market creation of a European real-time Pellets Atlas. Pellet marketcountry report Estonia, Latvia, Lithuania. LETEK - South Estonian Centre ofRenewable Energy; 2009. Retrieved at: (Feb, 2013), www.pelletsatlas.info.

[41] Daz-Yaez O, Mola-Yudego B, Anttila P, Rser D, Asikainen A. Forest chips forenergy in Europe: current procurement methods and potentials. Renew SustEnergy Rev 2013;21:562e71.http://dx.doi.org/10.1016/j.rser.2012.12.016.

[42] Mola-Yudego B. Regional potential yields of short rotation willow plantationson agricultural land in Northern Europe. Silva Fenn 2010;44(1):63e76.


mola-yudego et al, 2014 (1)

Documents