caplio rr1 rubydash - ricoh imaging

APPENDIX

Troubleshooting .................................................. 136Error Messages .................................................. 140Recording Capacities ......................................... 142Accessories ........................................................ 143Using Your Digital Camera in Other Countries .... 144Handling Precautions ......................................... 145Care and Storage ............................................... 146Specifications ..................................................... 147About the Warranty and Servicing ...................... 149Index ................................................................... 152

Alphabetical Index ..................................................... 152Functional Index ........................................................ 154

136136

Battery is exhausted, improperlyinserted or not loaded

Power is not turned on or modedial is not set

Shutter release button onlypressed halfway

SmartMedia memory card notformatted

Insufficient memory onSmartMedia memory card

Insufficient memory space ininternal memory

End of service life of SmartMediamemory card

Card door open

Self-timer on

Flash is charging

A write protect pad is attached ona SmartMedia memory card

SmartMedia memory card contactsurface dirty

Image confirmation time is tooshort

Battery expired, improperlyinserted or not loaded

AC adapter (optional) notconnected correctly

Card door open

No buttons touched so autopower off function was activated

Battery is exhausted

End of battery life

Camera operated in extremelyhigh or low temperature location

Camera operated in dark arearequiring frequent use of flash

Troubleshooting

Symptom Cause Remedy Page

Power will notcome on

Power cuts out

Battery will notcharge

Battery quicklyconsumed

Insert the battery correctly or charge thebattery

Connect correctly

Close the card door and turn power onagain

Turn power on again

Charge battery or use AC adapter(optional)

Replace with new battery

–

–

Recording

P.21P.22

P.25

P.30

P.30

P.21

P.22

P.23

–

Shutter releasebutton pressedbut no imagerecorded

Insert battery correctly or rechargebattery or use AC adapter (optional)

Turn power on and set mode dial toshooting mode

Press shutter release button all the way

Format SmartMedia memory card

Erase unwanted files or insert newSmartMedia memory card

Erase unwanted files

Insert new SmartMedia memory card

Ensure that card door is securely closed.

Press button to disable the self-timer

Wait until flash LED ceases flashing

Remove the write protect pad from theSmartMedia memory card

Clean contact surface with soft dry cloth

Set a longer image confirmation time


P.21P.22

P.30

P.51

P.120

P.27P.114

P.114

P.27

P.27

P.67

–

P.26

P.26

P.122

Refer to the items listed below before submitting the equipment for repairs. If theproblem persists, contact your nearest Ricoh service center.

Power Source

Cannot confirma shot picture

137

Ap

pen

dix

Power is off, or LCD monitor isdark

Dirty lens or AF viewfinder

Subject not in center of autofocusfield

Subject difficult to focus

Shooting mode is set to(Sound), (ContinuousShooting) or (Motion Picture)

Flash is set to (flash off)mode

Mode dial is set to macro mode

White balance set to mode otherthan auto


Subject farther than approx. 2.5m

Camera is too close to subject

Overexposed

Brightness setting needsadjusting

Shot in low light area with cameraset to (flash off) mode

Under-exposed

Brightness setting needsadjusting

Shooting conditions difficult toachieve white balance in automode

Screen display set to off

Brightness of autofocus field andsurrounding area are different, orpicture shot in a dark place

Phenomenon occurring withpictures of bright subject, knownas smudge phenomenon

Autofocus is onbut camera notfocusing

Turn power on, or adjust brightness of theLCD monitor with LCD LIGHT button

Clean lens or viewfinder with soft dry cloth

Use focus lock

Use focus lock or switch to manual focus

Set mode dial to (Still Picture) or(Text) mode

Press button to cancel flash off mode

Press button to cancel macro mode

Set white balance to auto

Charge battery or use AC adapter (optional)

Come closer to subject

Set flash to flash off mode with button

Press button to change exposurecompensation level or cancel the timeexposure mode

Press LCD LIGHT button to adjustbrightness of LCD monitor

Press button to cancel flash off mode

Press button to change exposurecompensation level or set the timeexposure mode

Press LCD LIGHT button to adjustbrightness of LCD monitor

Place a white object near the subject, usethe flash or select a white balance modeother than auto

Press DISPLAY button to switch screendisplay mode

There is no malfunction

There is no malfunction

Flash will notfire or will notcharge

Image darkeven with flash

Image is toobright

Unnaturalcoloration ofimage

Date and otherrecording datawill not display


Image is toodark

LCD monitorbrightnesschanges duringAF operation

Vertical linesappear onimage

No image onthe LCDmonitor

P.42P.30

–

P.54

P.54P.70

P.45P.55

P.60

P.68

P.64

P.21

P.60

P.60

P.62

P.42

P.60

P.62

P.42

P.60P.64

P.46P.97

–

–

138

Playback and Erasing

Cannot play orimage will notappear

Camera not set to (Play)mode

Wrong playback source

SmartMedia memory card notinserted or does not contain anyfiles

Attempted to play SmartMediamemory card not formatted withthis camera

SmartMedia memory cardcontains incorrectly recorded files

SmartMedia memory cardcontains files in format not readby this camera

Card door open

Video interface cable notcorrectly connected

Source of interference, such aselectric motor, nearby

SmartMedia memory card contactsurface dirty

Error in internal memory ofcamera

Error in SmartMedia memorycard in use


Camera was left unoperated soauto power off was activated

Camera not set to erase mode

Write protect pad on SmartMediamemory card

Protected file

Set mode dial to (Play)

Press button to change playbacksource

Insert SmartMedia memory card withrecorded images

Use SmartMedia memory card that hasbeen formatted and recorded on thiscamera

Insert SmartMedia memory cardcontaining pictures properly recorded withthis camera

Check format type

Ensure that card door is securely closed

Check connection

Relocate camera away from interferencesource

Clean contact surface with soft dry cloth

Copy required files from internal memoryonto SmartMedia memory card and formatinternal memory

Test camera with another SmartMediamemory card. If second card displayswell, problem is with card not camera.


Turn power on again

Set the mode dial to (Play) and pressthe button.

Remove the pad from the SmartMediamemory card

Use the playback menu to cancel theprotect setting

P.92

P.92

P.27

P.27

P.27

P.90

P.27

P.90

–

P.26

P.103P.120

–

P.21P.25

P.44

–

P.26

P.106


Display shutsoff

Replay is notclear

File will noterase orSmartMediamemory cardwill not format

139

Ap

pen

dix

Wrong type of SmartMediamemory card

SmartMedia memory cardincorrectly oriented


Camera malfunction

Date and time setting is incorrect

Battery has been removed

Keep settings mode is disabled

Auto power off setting is disabled

Camera powered by AC adapter

Beep disabled

Obstruction between remotecontrol unit and camera sensor

Dirty remote control transmitter orcamera sensor

Remote control battery expired

TV system setting is incorrect

Incorrect video I/O switch settingon video equipment

SmartMediamemory cardwill not fit intoslot

Use a SmartMedia memory card specifiedfor the camera

Insert the SmartMedia memory card thecorrect way


• Turn power off and on once. Set themode dial to (Still Picture) or (Text).

• Reset the camera.If the problem persist, carry out thefollowing procedures.1 Remove the battery, then reload the

battery.2 Try operating the camera again.

Set the correct date and time

The date setting is reset if the battery hasbeen removed for about 1 month. Set thedate again.

Enable the keep settings mode

Enable setting

Auto power off is automatically disabledwhen powered by an AC adapter

Set beep sound to [ON] in the SET menu.

Remove obstruction*Sensor is on upper left of LCD monitor

Clean with soft dry cloth

Replace CR2032 lithium battery

Select correct TV system

Check video I/O switch setting on videoequipment

Miscellaneous

Camera will notoperate evenwhen buttonsand switchesare operated

Date and timeare wrong

Date and timewere set butdisappeared

Auto power offwill not activate


P.27

P.27

P.21

P.30P.31

P.140

P.37

P.37

P.120

P.123

–

P.124

–

–

–

P.126

–

No image onTV screen

Mode settingshave changed

Beep will notsound

Remote controlunit will notwork

140140

Error Message

NO CARD

FORMAT CARD

FORMAT INTERNALMEMORY

CARD ERROR

WRITE PROTECTED

FILE PROTECTED

NO FILE

UNMATCHED FILE

FILE NUMBER OVER

SETDATE/TIME

Error Messages

If any of the error messages or error codes listed below appear on the camera’s LCDmonitor or on the LCD panel, read the corresponding explanation and take thecorrective action suggested.

LCD Monitor

Explanation and Remedy

Indicates low battery. Recharge battery.

A SmartMedia memory card has not been inserted.Insert a SmartMedia memory card.

The SmartMedia memory card is unformatted. Formatthe card with the camera.

Format the internal memory.

A SmartMedia memory card of this type is notsupported by this camera.Use a different type of SmartMedia memory card.

A write-protected SmartMedia memory card is found.Remove the write-protection pad from the card to gainaccess to it.

You attempted to erase a protected file. Unprotect thefile before erasing it.

There are no files to play. Insert a SmartMediamemory card with files recorded on it.

You attempted to play an unplayable file.

The file number limit has been exceeded. Deleteunwanted files or use another SmartMedia memorycard.

The date has not been set. Set the date before startingoperations with the camera.

141

Ap

pen

dix

Note

• If the error display does not clear, reset the camera to its factory default settings.How to reset: With the terminal cover open, press the reset button (p.8). If the error display still won’t clear,call your dealer or a Ricoh service center.

Error Code Explanation and Remedy

The SmartMedia memory card is unformatted. Format thecard with the camera before using it.

Format the internal memory before using it.

A SmartMedia memory card of this type is not supportedby this camera. Use a different type of SmartMediamemory card.

LCD Panel

142142

Recording Capacities

The table below gives approximate recording picture counts available by SmartMediamemory card capacity and by picture quality/size.

Note

• The figures for SmartMedia cards of the same capacity may vary slightly depending on the type of card.

• Image quality (compression rate) is as follows.

F : FineN : NormalE : EconomyNC : Non-compressed

• The internal memory is similar to an 8 MB SmartMedia memory card.

• Even when “1” is displayed as the number of recordable pictures in the Text mode, recording may not be

possible in some cases, depending on the subject.

4MB 8MB 16MB 32MB 64MB 128MBF 2 5 11 22 44 88

2272 × 1704N 5 11 22 44 88 177

E 10 21 43 86 173 347

NC 0 1 2 4 8 16

F 8 16 33 66 133 266

1120 × 840N 16 33 66 133 266 532

E 30 62 124 249 499 998

NC 2 4 8 16 33 67

F 24 49 99 199 399 798

640 × 480N 45 90 166 332 665 1331

E 82 165 332 665 1331 2662

NC 6 12 24 49 99 199

2272 × 1704 10 21 43 86 173 347

1120 × 840 30 62 124 249 499 998

Motion Picture Mode (Minutes : Seconds) 00:20 00:41 1:22 2:46 5:32 11:05

Sound Mode (Minutes : Seconds) 8:25 16:57 33:57 68:05 136:19 272:40

Still Picture

Mode (No. of

images)

Text Mode (No.of images)

143

Ap

pen

dix

Item Model Remarks

For drawing power directly from a householdelectrical outlet.

The camera body battery.

High speed battery charger for rechargeablebatteries.

AC Adapter AC-3

Rechargeable Battery DB-20L

Battery Charger BJ-1

SmartMedia Memory Card

4 MB FS-4

8 MB FS-8

16 MB FS-16

32 MB FS-32

64 MB FS-64

A postage stamp-sized recording media with athickness of 0.76 mm.Capable of recording a maximum of about 16images in (1120 × 840N) mode.Capable of recording a maximum of about 33images in (1120 × 840N) mode.Capable of recording a maximum of about 66images in (1120 × 840N) mode.Capable of recording a maximum of about 133images in (1120 × 840N) mode.Capable of recording a maximum of about 266images in (1120 × 840N) mode.

For remote operation of the camera’s recording andplayback functions.

Used to insert a SmartMedia memory card directlyinto a PC card slot.

Used to insert a SmartMedia memory card directlyinto a PC floppy disk drive.

Remote Control Unit DR-3

PC Card Adapter FS-B53

Floppy Disk Adapter FS-B10

Accessories

144144

Using Your Digital Camera in Other Countries

Ricoh AC-3 AC Adapter (optional)

• The AC-3 AC adapter adjusts automatically to voltages ranging from 100V to240V and frequencies of 50Hz to 60Hz.

• Some countries use electrical outlets which have different shapes. Before leavingon a trip, obtain the necessary plug adapter from a travel agent or electric store.

Using a Local TV Receiver for Playing Pictures

• You can play pictures taken with this camera on a TV receiver (or monitor)equipped with a video input terminal. Use the video interface cable supplied.

• This camera supports two television systems: NTSC and PAL. Switch yourcamera’s video system to meet the local television environment.

• If you plan to take the camera with you on a trip abroad, identify the localtelevision system beforehand.

145

Ap

pen

dix

Handling Precautions

This camera is not waterproof. Keep away from water, rain, beverages, etc.Consult your nearest Ricoh service office if any liquid gets into the camera.

Be careful not to drop the camera or subject it to impact. To avoid overheating, do not use the flash more than necessary in continuous

shots. Never look through the viewfinder directly at the sun or intense light. Do not fire the flash close to an infant’s eyes as this may result in impaired

eyesight. Do not fire the flash into the eyes of someone driving a vehicle as this may result

in a traffic accident. Exercise caution to prevent sand or dust from getting into the camera in such

environments as beaches or work sites. Do not leave the camera for any length of time in particularly hot or humid places,

such as an automobile with the windows closed, beaches or bathrooms. Verify that the camera power is off before you attach the AC adapter (optional). The LCD monitor or the LCD panel may contain some pixels that always or never

illuminate and the brightness of some areas of the monitor may appear uneven.These are typical LCD performance characteristics and do not constitutemalfunctions.

Do not force the card door, terminal cover or battery cover. Do not lift the camera by the LCD monitor, card door, terminal cover or battery

cover. Do not apply unreasonable force when opening or turning the LCD monitor. Be careful not to hit the lens unit or the LCD monitor while carrying the camera.

Make sure to close the LCD monitor when carrying the camera. Extreme temperature diferences may cause condensation to form inside the

camera body and lens unit, reducing performance. To avoid this, place thecamera in a plastic bag and let it slowly acclimate to the new temperature beforeexposing it.

Potential Causes of Condensation• Suddenly moving the camera from a cold place to a warm place.• Storing or using the camera in place subject to high humidity.• Bringing the camera into a recently heated room or leaving it directly in the path

of air conditioning.

146146

Care and Storage

Care Fingerprints or dirt on the lens or AF viewfinder will reduce the image quality so

take extra care not to get them dirty. Do not wipe dust or smears off the lens or AF viewfinder with your fingers. Use a

lens blower, available at most photographic suppliers, to blow dust off, or a softcloth to wipe it lightly.

Be particularly diligent in cleaning the lens after use at the beach or in the vicinityof chemicals.

If your camera should malfunction, take it to your nearest Ricoh service office.This product generates high voltage and disassembly is hazardous. Under nocircumstances should you attempt to disassemble it yourself.

Never use solvents, benzine, insecticides or other volatile substances on theequipment as this may deform or dissolve it.

Be careful not to let objects rub against the LCD monitor or the LCD panel as theyare easily scratched.

To clean the surface of the LCD monitor or LCD panel, wipe it gently with a softcloth that has been moistened with a small amount of solvent for cleaning LCDdisplays, sold at camera shops.

Precautions regarding care of your camera(1) Make sure that the camera is turned off.(2) Remove the battery and AC adapter before cleaning the camera.

StorageTo prevent possible failures, avoid storing the camera in places that are: Hot and damp, or subject to sharp temperature or humidity changes. Sandy or dusty. Subject to strong vibration. In contact with chemicals, such as insecticides, or rubber or PVC products for

extended periods of time. Near sources of strong electromagnetism (such as monitors, transformers, and

magnets).

147

Ap

pen

dix

General Video Signal Protocol Power Source Voltage

Dimensions Mass Operating Temperature

Range Operating Humidity Range Storage Temperature

Range

Camera CCD Number of Effective Pixels Lens

• Focal length

• Minimum shooting range• Macro shooting range• Digital Zoom

Viewfinder• Type• Parallax correction

Monitor• Display size• Drive system• No. of pixels

White Balance

Exposure Compensation• Light metering system• Exposure memory

mechanism• Metering system• Flash automatic exposure• Shutter speed

• ISO sensitivity

Distance Adjustment• Autofocus system• Autofocus range

Built-in Flash• Range• Modes

: NTSC/PAL: Battery: 3.7V

AC: 5V: 135.4 × 74.0 × 26.6 mm (5.3 × 2.9 × 1 in.): Approx. 270 g (9.5 oz) (excluding battery): 0°C to 40°C (32°F – 104°F)

: 85% or less: –20°C to 60°C (–4°F – 140°F)

: 4,130,000 pixels (Number of Total Pixels): 3,950,000 pixels: Zoom lens F=2.6 – 3.4: f=7.3 - 21.9 mm (equivalent to 35 - 105 mm in 35mm

camera format): Approx. 24 cm (9.4 in) (wide angle): Approx. 1 - 24 cm (0.4 in – 9.4 in): ×1.4, ×1.8, ×3.6

: Real image: Yes (–2 - +1 dpt)

: 2.0": TFT Active Matrix System: Approx. 200,000: Auto/Preset (Daylight, Overcast, Tungsten Light,

Fluorescent Light)

: Centerweighted, Multi, Spot: Auto backlighting compensation/Manual exposure

compensation ±2.0 EV (in 0.25 EV steps): TTL-CCD: Yes (daylight synchro): 1- 1/2000 in still picture mode, 1/30 - 1/2000 in motion

picture mode: ISO Approx. equivalent to 150 (AUTO), ISO 200, ISO

400, ISO 800

: Normal shooting domain: TTL-CCD, macro domain: CCD: Normal shooting domain: approx. 24 cm - ∞ (9.4 in - ∞),

macro domain: 1 - 24 cm (0.4 – 9.4 in.)

: Approx. 0.6 - 2.5 m (2.0 ft – 8.2 ft): Off/Forced flash/Slow synchro/Auto/Red-eye reduction

Specifications

148

Image Data Recording and Playback Resolution

• Still picture mode• Text mode• Motion Picture mode

File Format• Still picture mode

• Text mode• Motion Picture mode• Sound mode

Camera File SystemStandard

Compression Format File Sizes

• 2272 × 1704

• 1120 × 840

• 640 × 480

Input/Output Terminal Power Input Video Output USB

Body Tripod Screw Hole

Power Supply Main Battery

• Type• Voltage

Date Retention Time

Auto Power Off

Internal Memory• Capacity

Compatible Memory Cards for Recording and Playback Type of Memory

• Capacity• Operating voltage

: 2272 × 1704, 1120 × 840, 640 × 480 pixels: 2272 × 1704, 1120 × 840: 288 × 216 pixels

: Compressed: JPEG (Exif2.1), Non-compressed: TIFF(Exif2.1)

: TIFF (G4 MMR): AVI (conforms to Open DML Motion JPEG format): WAV (Exif 2.1): DCF (Design rule for Camera File system standardized

by JEITA): JPEG baseline system

: F: approx. 1.5 MB, N: approx. 726 KB, E: approx. 363KB, NC: approx. 7.7 MB

: F: approx. 470 KB, N: approx. 235 KB, E: approx. 118KB, NC: approx. 1.8 MB

: F: approx. 152 KB, N: approx. 72 KB, E: approx. 40 KB,NC: approx. 614 KB

: 5 V (AC adapter): 1.0 Vp-p (75 Ω): For connecting to a PC

: Yes (1/4-20 UNC): Less than 6.0 mm (0.24 in.)

: Rechargeable lithium ion battery: 3.7 V

: Approx. 20 days

: Off/Activated after more than 1 min., 3 min. or 5 min.

: 8 MB

: SmartMedia memory card: 4, 8, 16, 32, 64, 128 MB: 3.3 V

149

Ap

pen

dix

About the Warranty and Servicing

1. The Ricoh Caplio RR1 camera is backed by a one-year limited warranty. During thewarranty period, which starts from the date of purchase, any defective parts will berepaired free of charge. In the event of a camera malfunction, contact the dealerfrom which you purchased the camera or contact your nearest Ricoh service office.Please note that you will be liable for any costs incurred in taking the camera to theRicoh service office.

2. This warranty does not cover any damage resulting from:q Failure to follow the instructions in the instruction manual;w Repair, modification or overhaul not conducted by an authorized service center

specified in the instruction manual;e Fires or natural disaster;r Improper storage, such as exposing the camera to high temperatures, humidity,

or insecticide; storing it with a leaking battery; storing the camera in a dirtycondition so that it becomes moldy; or otherwise insufficiently caring for thecamera.

t Submergence; exposure to floods or spilled alcoholic or other beverages;allowing sand or mud to enter the camera; exposure to physical shocks; ordropping of the camera.

3. After a full year has passed from the purchase date, you will become liable for allrepair fees, including those incurred at an authorized service center.

4. You will be liable for all repair fees, even within the warranty period, if the warrantycard is not attached or if the distributor’s name or the purchase date has beenchanged or is not indicated on the card.

5. Expenses for overhauls and thorough inspections as a result of a customer’s specialrequest will be charged to the customer, whether or not they are incurred during thewarranty period.

6. This warranty only applies to the camera and not to the accessories, such as thecase and wrist strap, nor does it apply to the consumables provided, such asbatteries.

7. Any consequential damage arising from the failure of this camera, such asexpenses for taking pictures or loss of expected profit, will not be reimbursedwhether it occurs during the warranty period or not.

8. The above provisions refer to repairs offered free of charge, and do not limit yourlegal rights. The intention of the above provisions is also described in the warrantycard provided with this camera.

150

9. Parts essential to the servicing of this camera - that is, components required tomaintain the functions and quality of this camera - will be available for a period ofseven years after the camera is discontinued. However, as some of those parts arekept for a longer period, do not hesitate to contact your distributor or nearest Ricohservice representative even after the seven year period.

10. Please note that if the camera is seriously damaged by flooding, submergence,infiltration of sand or mud, violent shocks or dropping, the camera may not berepairable, and restoration of its original condition may be determined to beimpossible.

Note

• Before sbumitting the camera for repair, check the battery and read this operation manual again to ensureproper operation.

• Some repairs require a significant amount of time to be completed. Please allow sufficient time for repairs.

• When sending the camera to a service representative, please include a note which describes the defectivepart and the problem as precisely as possible.

• Remove all accessories not related to the problem before sending the camera to a service representative.

• Before taking any important pictures (such as at weddings, on trips abroad, etc.), test the camera to check itsoperation and ensure proper functioning. We recommend that you keep this manual and a spare battery onhand.

151

Ap

pen

dix

152152

Index

Alphabetical Index

AAC adapter ...................................... 9, 25Adding a sound ................................... 94Adjusting the camera .......................... 42AF LED............................................ 9, 52Auto bracket ........................................ 83Auto playback .................................... 100Auto power off ................................... 123

BBattery ................................................... 9

Charging ......................................... 21Loading ........................................... 22

Battery charger ..................................... 9Beep sound ....................................... 124

CCompression rate ................................ 48Continuous shooting mode ........... 31, 56Copying ............................................. 103Cropping............................................ 101

DDate imprinting .................................... 74Digital zoom function ........................... 50Diopter adjustment .............................. 42Display language ............................... 127

EErase all images................................ 115Erase selected images ...................... 116Erase single image ............................ 114Erasing .............................................. 113Error messages ................................. 140Exposure compensation ..................... 62Exposure metering system ................. 86

FFlash LED ................................ 9, 52, 61Flash mode ......................................... 60Focus .................................................. 70Focus lock shooting ............................ 54Formatting ......................................... 120

HHow to hold the camera ...................... 40

IImage quality mode ............................. 47Information displays

Playback mode ............................... 33Shooting mode ............................... 32

Initializing settings ............................. 127Internal memory .................................. 46Interval shooting .................................. 82ISO setting .......................................... 73

KKeep settings .................................... 121

LLCD confirmation time ...................... 122LCD monitor ............................. 8, 32, 41

Adjusting the brightness ................. 42Viewing on the LCD monitor ........... 49

LCD monitor displayPlayback mode ............................... 97Shooting mode ............................... 46

LCD panel ....................................... 8, 32Lens cap.............................................. 20

MMacro mode ........................................ 68Menus ................................................. 34Microphone ........................................... 8

153

Ap

pen

dix

Mode dial ......................................... 9, 31Monochrome mode ............................. 80Motion picture mode...................... 31, 57Multi image playback ........................... 98

NNegative mode .................................... 81No. of pixels ......................................... 48Non-compressed mode ....................... 84

PPlayback

Motion picture file ........................... 96Sound file ........................................ 95Still picture/text/continuous file ....... 92

Playback mode .................................... 31Playing a file shot with a non-Ricoh camera ........................ 104Power save mode .............................. 124Printing Services ............................... 107Printing services ................................ 107

Cancel the DPOF settings ............ 111Number of index prints ................. 110Number of prints ........................... 108

Protecting a file ................................. 106

RRecording capacities ......................... 142Recording destination ......................... 46Red-eye reduction mode ..................... 72Remote control .................................. 129Remote control unit ............................... 9Reset button .......................................... 8Rotating ............................................. 105

SS Mode ................................................ 87Selecting, setting andcancelling items................................... 36Self-timer ............................................. 67Sequential no. ................................... 125

Setting the date and time .................... 37Settings mode ............................. 31, 120Sharpness mode ................................. 79Shooting ........................................ 43, 51Shooting mode .................................... 45Shutter release button ........................... 8Slow shutter ........................................ 87SmartMedia memory card ....... 9, 26, 46

Inserting .......................................... 27Protecting againstaccidental writing ............................ 26

Sound file ............................................ 95Sound mode ........................................ 31Sound recording .................................. 56Speaker ................................................. 8Split-screen mode ............................... 75Still picture mode........................... 31, 51Still picture/text shootingwith sound ........................................... 58Strength of the flash ............................ 61Sub shutter release button .................... 8

TTELE ................................................... 50Text mode ...................................... 31, 55Time exposure mode .......................... 88Turning the camera on and off ............ 30

VVideo-out signal method ................... 126Viewfinder ....................................... 9, 48

WWhite balance ..................................... 64WIDE ................................................... 50Wrist strap ........................................... 20Write protect pad ................................. 26

ZZoom ................................................... 50Zoom lever .......................................... 50Zoom playback .................................... 99

154

Functional Index

Shooting Mode [ • • • • ]

MENU Button

Records with sound in (Still Picture) and (Text) modes p.58Selects the focus mode p.70Selects the level of strength of the flash p.61Lessens the red-eye phenomenon when using the flash p.72Selects the ISO setting. p.73

Records images with the date imprinted p.74Records an image divided into two halves p.75Selects the degree of emphasis of the outline of the subject p.79Records images in monochrome or sepia p.80Mode setting for shooting 35mm negatives p.81

Selects interval shooting p.82Records three images at -0.5EV, 0 and +0.5EVbased on the current exposure compensation level p.83Records in non-compressed mode p.84Selects the exposure metering system p.86Reduces camera shake when shooting in darksurroundings p.87

Changes the exposure time p.88

IMAGE WITH SOUND ONSHOOTING MODE 1/4

SELECT: CHANGE:SEL.:ENTER

FOCUS AFFLASH STRENGTH NORMAL

ISO SENSITIVITY AUTOREDEYE REDUCTION OFF

BACK:MENU

DATE IMPRINT OFFSHOOTING MODE 2/4


SPLIT–SCREENSHARPNESS OFF

NEGATIVE OFFMONOCHOME MODE OFF

BACK:MENU

INTERVAL MODESHOOTING MODE 3/4


AUTO BRACKET OFFNO COMPRESSION OFF

S MODE OFFPHOTOMETRY MULTI

BACK:MENU

TIME EXPOSURE OFFSHOOTING MODE 4/4

SELECT: CHANGE:SEL.:ENTERBACK:MENU

155

Ap

pen

dix

Playback Mode [ ]

MENU Button

Displays 6 files at once p.98Automatically plays all files p.100Cuts out part of the displayed image and saves it as a separate file p.101Copies recorded files from the internal memoryonto a SmartMedia memory card, and vice versa p.103Plays files shot with another digital camera. p.104

Turns a file 90 degrees right, 90 degrees left, or 180 degrees p.105Protects files from erasure p.106Sets the number of copies, etc. when submittingrecorded files to digital printing services p.107

Button

Erases selected images one at a time. p.114Erases all the recorded files. p.115Erases multiple selected images. p.116

MULTI IMAGEPLAYBACK MODE 1/2


AUTO PLAYBACK 1SEC.CROPPING

SELECT FOLDERCOPY

BACK:MENU

PLAYBACK MODE 2/2


PROTECTDPOF

BACK:MENU

ROTATION OFF

ERASE

ERASE SINGLE IMAGEERASE ALL IMAGESERASE SELECTED IMAGESSELECT:BACK:CANCEL SEL.:ENTER

156

SET Mode [ ]

Formats the internal memory or SmartMedia memory card p.120Saves the camera settings p.121Sets the confirmation time for images after shooting p.122Enables or disables the automatic power off feature p.123Switches the beep sound on and off p.124

Conserves power consumed by the LCD monitor andextend the battery life p.124Switches consecutive numbering of files on and off. p.125Sets the date and time p.37Switches the video system whenthe camera is connected to a TV set p.126Selects the language of the LCD monitor display p.127

Returns all the settings to their initial status p.127

FORMATSET 1/3


KEEP SETTINGSLCD CONFIRMATION 1SEC.

BEEP SOUND ONAUTO POWER OFF 1MIN

POWER SAVE MODE ONSET 2/3


SEQUENTIAL NO. OFFDATE SETTING 2001/10/15

LANGUAGE ENGLISHVIDEO OUT MODE NTSC

INITIALIZE SETTINGSET 3/3


157

Ap

pen

dix

158

Declaration of Conformity“The Product complies with the requirements of the EMC Directive 89/336/EEC.”

159

Ap

pen

dix

INFORMATION TO THE USERUSA FCC Part15 Class BThe equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, user, and can radiate radio frequency energy and if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. In this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment to outlet on a circuit different from that to which thereceiver is connected.– Consult the dealer or an experienced radio/TV technician for help. (FCC 15.105B)Changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment. (FCC 15.21)Properly shielded and grounded cables and connectors must be used for connectionto a host computer in order to comply with FCC emission limits. (FCC 15.27)An AC adapter with a ferrite core must be used for RF interference suppression.

COMPLIANCE INFORMATION STATEMENTProduct Name: DIGITAL CAMERAModel Number: Caplio RR1This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including

interference that may cause undesired operation.

RICOH CORPORATION5 Dedrick Place, West Caldwell NJ, 07006 Tel.: 1-800-225-1899

Note to Users in CanadaNote: This Class B digital apparatus complies with Canadian ICES-003

Remarque Concernant les Utilisateurs au CanadaAvertissement: Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada

IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOWTHESE INSTRUCTIONS.

Telephone Support Numbers in Europe

UK (from within the UK) 01844 219 342(from outside of the UK) +44 1844 219 342

Deutschland (innerhalb Deutschlands) 06331 268 438(außerhalb Deutschlands) +49 6331 268 438

France (à partir de la France) 0800 91 4897(en dehors de la France) +33 800 91 4897

Italia (dall’Italia) 02 696 33 451(dall’estro) +39 02 696 33 451

España (desde España) 91 406 9148(desde fuera de España) +34 91 406 9148

caplio rr1 rubydash - ricoh imaging

Documents