extract lighting
Post on 11-Sep-2021
6 Views
Preview:
TRANSCRIPT
extract LIGHTING
2018
extract 2018 extract 2018
L’atelier en 1925
01 extract 2018 01
N o u s t r a n s f o r m o n s l e p l â t r e e n l u m i è r e .E n g i n e e r i n g p l a s t e r , f o r m i n g l i g h t .
Des générations de travailleurs duplâtre se transmettent, au sein de lafamille, un savoir-faire toujours plusaffuté.
Si l’on en croit le Président du GroupeAtelier Sedap, Benoît Bohu, « notrefamille a le plâtre dans les gênes depuisdes décennies ! » ; une passion partagéepar l’ensemble du staff…
The Atelier Sedap family of plasterworkers refine and pass on their skillsfrom one generation to the next.
According to Benoît Bohu, Presidentof the Atelier Sedap group: “Plasterhas been part of my family’s DNA fordecades!”.And all employees share this passion.
Benoît BOHUPrésident - C.E.O.
(1960-2017)
16/04/2017 11:31
02
*Issu des carrières du bassinparisien, le plâtre qu’utiliseAtelier Sedap est travaillé,façonné et moulé sur les bords del’océan Atlantique.
Plâtre de Paris + FabricationLocale + Capital Humain National= une Production 100% Française.
Extracted from quarries nearParis, the plaster that AtelierSedap uses is worked, shaped andmolded near the Atlantic coast.
Made in France, from plaster ofParis by French employees, ourproducts are 100% French-made.
*
AS lighting 2018 IMPRIMEUR 160417.indd 2 16/04/2017 11:31
03 extract 2018
La recherche et la créativitéd’Atelier Sedap ont permis de faireévoluer les utilisations du plâtreet de multiplier ses applicationsdans l’éclairage.Le choix du matériau plâtres’inscrit, aujourd’hui plusque jamais, dans une démarchevolontaire de productionrespectueuse de l’environnement.En effet, le plâtre se distinguedepuis des millénaires pourses propriétés de régulationhygrométrique, de protection contreles incendies, et de performancesd’isolation acoustique. Il estreconnu aujourd’hui pour soninnocuité pour l’environnement etla santé.
Pour la santé parce que leplâtre est confectionné à partirde gypse (roche minérale) et d’eau,il ne requiert pas l’utilisationde colles, de solvants ou autresproduits nocifs pour l’homme.
Pour l’environnement parcequ’une politique environnementaletrès sérieuse régit l’avant,le pendant et l’après del’exploitation. Le plâtre utilisépar Atelier Sedap provientd’une exploitation françaiserespectueuse de toutes les normesenvironnementales. D’autre part,la cuisson du plâtre se fait àbasse température, ce qui réduitau maximum le dégagement de CO2.Enfin, les déchets de fabricationet du chantier sont recyclés.
* Research and creativityhave enabled Atelier Sedap todevelop new uses for plaster andinnovative lighting applications.Today more than ever, plaster’senvironment-friendly qualitiesmake it the preferred choice.Although plaster’s capacity toregulate humidity, withstandfire and absorb noise have beenrecognized for thousands of years,it is increasingly appreciated forbeing environmentally safe andnon-toxic.
Plaster is non-toxic because itis made from gypsum, a mineral,and water and contains no glues,solvents or other substancesharmful to man.
Plaster also has very littleimpact on the environment, sincethe extraction of gypsum andthe production and disposal ofplaster are subject to very strictenvironmental regulations. Theplaster we use at Atelier Sedap isobtained from a French quarry thatcomplies with all environmentalstandards. Furthermore, themanufacturing of plaster producesvery little carbon emissions sinceit is cooked at a low temperature.Lastly, production and constructionwaste are recycled.
*
AS lighting 2018 IMPRIMEUR 160417.indd 3 16/04/2017 11:31
04
SYSTEMS
SYSTÈMES08-57
60-90RECESSED & SEMI-RECESSED LAMPS
ENCASTRÉS & SEMI-ENCASTRÉS
extract 2018
AS lighting 2018 IMPRIMEUR 160417.indd 4 16/04/2017 11:32
05
U-BLADE 120V-BLADE 170
BLADEMINI BLADE
MICRO BLADE 35
MICRO CORNICHE
MICRO BLADE PLINTHE
U-BLADE 135 U-BLADE 120 X 120
MICRO BLADE 50
MICRO BLADE 63
MICRO BLADE ANGLE MICRO BLADE CURTAIN 1-2
MINI X-BLADEX-BLADE MICRO X-BLADE
14
22
24
26
30
06
MICRO BLADE 25
MICRO BLADE CIRCLE
MICRO BLADE DOOBLE
32
36
CORNICHES
COUPOLES COUPOLES STYLE
SYSTÈMES ENCASTRÉS/RECESSED SYSTEMS - COUPOLES & CIRCLE
SYSTÈMES ENCASTRÉS/RECESSED SYSTEMS - PROFILS
MICRO BLADE CROSSMICRO BLADE TURN
SYSTÈME NON ENCASTRÉ/SURFACE MOUNTED SYSTEMS - PROFILS
ECO BLADE
46
50
52
CORNICHES AUTO-ÉCLAIRANTES
extract 2018
MICRO BLADE CADRE
AS lighting 2018 IMPRIMEUR 160417.indd 5 16/04/2017 11:37
06 extract 2018
COUPOLESGamme de coupoles lisses encastrées en plâtre HD pour éclairage LEDs avec alimentation séparée.Range of high-strength plaster simple domes, for recessed LED lighting with separate power supply.
PLAFOND COMPOSITION
COUPOLES
DESIGN
ATELIER SEDAP
794 / COUPOLE 100
595
85
Ø 420
790 COUPOLE 42 Design Atelier Sedap
790_32
5 KG
2 700 °K / 41,6 W / 4 000 lm / IRC ≥ 90
790_26 3 100 °K / 31 W / 3 200 lm
5195 Dissipateur de chaleur en aluminium cintré pour 790_00 / Heatsink in aluminium for 790_00
790_27 RVB-RGB / 24 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
790_31 3 000 °K / 41,6 W / 4 000 lm / IRC ≥ 90790_29 2 800 °K / 31 W / 3 200 lm
790_00 Coupole sans équipement électrique / Dome without LED - (LEDs 160 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
Existe aussi en plafonnier (réf. 3160)
AS lighting 2018 IMPRIMEUR 160417.indd 6 16/04/2017 11:37
07 extract 2018
COUPOLES
925150
Ø 750
1175
200
Ø 1000
1675
260
Ø 1500
792 COUPOLE 75 Design Atelier Sedap
792_32
11 KG
2 700 °K / 67,6 W / 6 500 lm / IRC ≥ 90
792_26 3 100 °K / 50 W / 5 200 lm
5196 Dissipateur de chaleur en aluminium cintré pour 792_00 / Heatsink in aluminium for 792_00
792_27 RVB-RGB / 39 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
792_31 3 000 °K / 67,6 W / 6 500 lm / IRC ≥ 90792_29 2 800 °K / 50 W / 5 200 lm
792_00 Coupole sans équipement électrique / Dome without LED - (LEDs 260 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
794 COUPOLE 100 Design Atelier Sedap
794_32
18 KG
2 700 °K / 88,4 W / 8 500 lm / IRC ≥ 90
794_26 3 100 °K / 65 W / 6 800 lm
5190.2 Dissipateur de chaleur en aluminium cintré pour 794_00 / Heatsink in aluminium for 794_00
794_27 RVB-RGB / 51 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
794_31 3 000 °K / 88,4 W / 8 500 lm / IRC ≥ 90794_29 2 800 °K / 65 W / 6 800 lm
794_00 Coupole sans équipement électrique / Dome without LED - (LEDs 340 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
796 COUPOLE 150 Design Atelier Sedap
796_32
40 KG
2 700 °K / 128,7 W / 12 375 lm / IRC ≥ 90
796_26 3 100 °K / 95 W / 9 900 lm
5191.3 Dissipateur de chaleur en aluminium cintré pour 796_00 / Heatsink in aluminium for 796_00
796_27 RVB-RGB / 72 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
796_31 3 000 °K / 128,7 W / 12 375 lm / IRC ≥ 90796_29 2 800 °K / 95 W / 9 900 lm
796_00 Coupole sans équipement électrique / Dome without LED - (LEDs 495 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
Existe aussi en plafonnier (réf. 3162)
Existe aussi en plafonnier (réf. 3164)
792-794 / COUPOLE 75 & 100790 / COUPOLE 42792 / COUPOLE 75
AS lighting 2018 IMPRIMEUR 160417.indd 7 16/04/2017 11:38
08 extract 2018
COUPOLES
FINITION FEUILLE D’OR, D’ARGENT OU DE CUIVRE
AS lighting 2018 IMPRIMEUR 160417.indd 8 16/04/2017 11:38
09 extract 2018
COUPOLES
595
85
Ø 420
925
150
Ø 750
797 / COUPOLE ORIGAMI 799 / COUPOLE GOUTTE
797 COUPOLE ORIGAMI Design Atelier Sedap
797_32
Ø 75 cm
2 700 °K / 67,6 W / 6 500 lm / IRC ≥ 90
797_26 3 100 °K / 50 W / 5 200 lm
5196 Dissipateur de chaleur en aluminium cintré pour 797_00 / Heatsink in aluminium for 797_00
797_27 RVB-RGB / 39 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
797_31 3 000 °K / 67,6 W / 6 500 lm / IRC ≥ 90797_29 2 800 °K / 50 W / 5 200 lm
797_00 Coupole sans équipement électrique / Dome without LED - (LEDs 260 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
Existe aussi en plafonnier (réf. 3166)925
150
Ø 750
799 COUPOLE GOUTTE 42 Design Atelier Sedap
799_32 2 700 °K / 41,6 W / 4 000 lm / IRC ≥ 90
799_26 3 100 °K / 31 W / 3 200 lm
5195 Dissipateur de chaleur en aluminium cintré pour 799_00 / Heatsink in aluminium for 799_00
799_27 RVB-RGB / 24 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
799_31 3 000 °K / 41,6 W / 4 000 lm / IRC ≥ 90799_29 2 800 °K / 31 W / 3 200 lm
799_00 Coupole sans équipement électrique / Dome without LED - (LEDs 160 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
Existe aussi en plafonnier (réf. 3168) Ø 42 cm
798 COUPOLE GOUTTE 75 Design Atelier Sedap
798_32
Ø 75 cm
2 700 °K / 67,6 W / 6 500 lm / IRC ≥ 90
798_26 3 100 °K / 50 W / 5 200 lm
5196 Dissipateur de chaleur en aluminium cintré pour 798_00 / Heatsink in aluminium for 798_00
798_27 RVB-RGB / 39 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
798_31 3 000 °K / 67,6 W / 6 500 lm / IRC ≥ 90798_29 2 800 °K / 50 W / 5 200 lm
798_00 Coupole sans équipement électrique / Dome without LED - (LEDs 260 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
Existe aussi en plafonnier (réf. 3167)
AS lighting 2018 IMPRIMEUR 160417.indd 9 16/04/2017 11:38
10 extract 2018
COUPOLES STYLEGamme de coupoles sculptées encastrées en plâtre HD pour éclairage LEDs avec alimentation séparée.Range of high-strength plaster sculpted domes, for recessed LED lighting with separate power supply.
COUPOLES STYLE
DESIGN
ATELIER SEDAP
PLAFOND COMPOSITION
793 / COUPOLE STYLE 75
AS lighting 2018 IMPRIMEUR 160417.indd 10 16/04/2017 11:38
11 extract 2018
COUPOLES STYLE
595
85
Ø 420
925
150
Ø 750
791 / COUPOLES STYLE 42
Schéma de pose d’une coupole lumineuse
3 pattes de sécurité (fournies)Câbles de sécurité non fournis 24 mm max
Faux plafond
Pour raccorder, utiliser :- Colle à carreaux de plâtre ou- Enduit cellulosique type Sim
791 COUPOLE 42 STYLE Design Atelier Sedap
791_32 2 700 °K / 41,6 W / 4 000 lm / IRC ≥ 90
791_26 3 100 °K / 31 W / 3 200 lm
5195 Dissipateur de chaleur en aluminium cintré pour 791_00 / Heatsink in aluminium for 791_00
791_27 RVB-RGB / 24 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
791_31 3 000 °K / 41,6 W / 4 000 lm / IRC ≥ 90791_29 2 800 °K / 31 W / 3 200 lm
791_00 Coupole sans équipement électrique / Dome without LED - (LEDs 160 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
793 COUPOLE 75 STYLE Design Atelier Sedap
793_32 2 700 °K / 67,6 W / 6 500 lm / IRC ≥ 90
793_26 3 100 °K / 50 W / 5 000 lm
5196 Dissipateur de chaleur en aluminium cintré pour 793_00 / Heatsink in aluminium for 793_00
793_27 RVB-RGB / 39 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
793_31 3 000 °K / 67,6 W / 6 500 lm / IRC ≥ 90793_29 2 800 °K / 50 W / 5 200 lm
793_00 Coupole sans équipement électrique / Dome without LED - (LEDs 260 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
6,4 KG
14,5 KG
Existe aussi en plafonnier réf. 3161
Existe aussi en plafonnier réf. 3163
AS lighting 2018 IMPRIMEUR 160417.indd 11 16/04/2017 11:38
COUPOLES STYLE
900 / COUPOLE RIVOLI
AS lighting 2018 IMPRIMEUR 160417.indd 12 16/04/2017 11:38
13 extract 2018
COUPOLES STYLE
1175
200
Ø 1000
795 / COUPOLE STYLE 100 900 / COUPOLE 100 RIVOLI
795 COUPOLE 100 STYLE Design Atelier Sedap
795_32 2 700 °K / 88,4 W / 8 500 lm / IRC ≥ 90
795_26 3 100 °K / 65 W / 6 800 lm
5190.2 Dissipateur de chaleur en aluminium cintré pour 795_00 / Heatsink in aluminium for 795_00
795_27 RVB-RGB / 51 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
795_31 3 000 °K / 88,4 W / 8 500 lm / IRC ≥ 90795_29 2 800 °K / 65 W / 6 800 lm
795_00 Coupole sans équipement électrique / Dome without LED - (LEDs 340 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
20 KG
1175
120
Ø 1000
900 COUPOLE 100 RIVOLI Design Atelier Sedap
900_32 2 700 °K / 88,4 W / 8 500 lm / IRC ≥ 90
900_26 3 100 °K / 65 W / 6 800 lm
5190.2 Dissipateur de chaleur en aluminium cintré pour 900_00 / Heatsink in aluminium for 900_00
900_27 RVB-RGB / 51 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
900_31 3 000 °K / 88,4 W / 8 500 lm / IRC ≥ 90900_29 2 800 °K / 65 W / 6 800 lm
900_00 Coupole sans équipement électrique / Dome without LED - (LEDs 340 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
20 KGHauteur d’encastrement hors-tout / Total recessed hight : 120 mm
Existe aussi en plafonnier réf. 3165
AS lighting 2018 IMPRIMEUR 160417.indd 13 16/04/2017 11:38
14 extract 2018
MICRO BLADE CIRCLE 42, 75, 100, 150 & 200Profil en plâtre HD à encastrer pour intégration de sources LED dans plafond et mur.Micro Blade est un système d’épaisseur 75 mm spécialement adapté aux cloisons en plaques de plâtre.Micro Blade is a high strength plaster profile for recessing linear LED lighting, 75 mm deep, especiallydesigned for walls and ceilings
MICROBLADECIRCLE
DESIGN
ATELIER SEDAP
AS lighting 2018 IMPRIMEUR 160417.indd 14 16/04/2017 11:38
15 extract 2018
MUR PLAFOND COMPOSITION
AS lighting 2018 IMPRIMEUR 160417.indd 15 16/04/2017 11:38
16 extract 2018
MICRO BLADE CIRCLE
758 MICRO BLADE CIRCLE 42 Design Atelier Sedap
758_32 2 700 °K / 41,6 W / 4 000 lm / IRC ≥ 90
758_26 3 100 °K / 31 W / 3 200 lm
5195 Dissipateur de chaleur en aluminium cintré pour 758_00 / Heatsink in aluminium for 758_00
758_27 RVB-RGB / 24 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
758_31 3 000 °K / 41,6 W / 4 000 lm / IRC ≥ 90758_29 2 800 °K / 31 W / 3 200 lm
758_00 Coupole sans équipement électrique / Dome without LED - (LEDs 160 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
15 KG
759 MICRO BLADE CIRCLE 75 Design Atelier Sedap
759_32 2 700 °K / 67,6 W / 6 500 lm / IRC ≥ 90
759_26 3 100 °K / 50 W / 5 600 lm
5196 Dissipateur de chaleur en aluminium cintré pour 759_00 / Heatsink in aluminium for 759_00
759_27 RVB-RGB / 38 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
759_31 3 000 °K / 67,6 W / 6 500 lm / IRC ≥ 90759_29 2 800 °K / 50 W / 5 600 lm
759_00 Coupole sans équipement électrique / Dome without LED - (LEDs 260 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
15 KGExiste aussi en suspension et en plafonnier
767 MICRO BLADE CIRCLE 100 Design Atelier Sedap
767_32 2 700 °K / 88,4 W / 8 500 lm / IRC ≥ 90
767_26 3 100 °K / 65 W / 6 800 lm
5190.2 Dissipateur de chaleur en aluminium cintré pour 767_00 / Heatsink in aluminium for 767_00
767_27 RVB-RGB / 51 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
767_31 3 000 °K / 88,4 W / 8 500 lm / IRC ≥ 90767_29 2 800 °K / 65 W / 6 800 lm
767_00 Coupole sans équipement électrique / Dome without LED - (LEDs 340 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
29 KGExiste aussi en suspension et en plafonnier
767-768-769 / MICRO BLADE CIRCLE 100, 150 & 200759 / MICRO BLADE CIRCLE 75
Schéma de principe Circle
Ø 420
62
075
Ø 750
95
075
1200
120
0
Ø 1000
75
AS lighting 2018 IMPRIMEUR 160417.indd 16 16/04/2017 11:38
17 extract 2018
MICRO BLADE CIRCLE
Plus d’informations et photométrie sur sedap.com / More data and photometry available at sedap.com
768 MICRO BLADE CIRCLE 150 Design Atelier Sedap
768_32 2 700 °K / 128,7 W / 12 375 lm / IRC ≥ 90
768_26 3 100 °K / 95 W / 9 900 lm
5191.3 Dissipateur de chaleur en aluminium cintré pour 768_00 / Heatsink in aluminium for 768_00
768_27 RVB-RGB / 72 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
768_31 3 000 °K / 128,7 W / 12 375 lm / IRC ≥ 90768_29 2 800 °K / 95 W / 9 900 lm
768_00 Coupole sans équipement électrique / Dome without LED - (LEDs 495 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
44 KGLivré en 2 éléments d’épaisseur 75 mm / Supplied in 2 elements
769 MICRO BLADE CIRCLE 200 Design Atelier Sedap
769_32 2 700 °K / 166,4 W / 16 000 lm / IRC ≥ 90
769_26 3 100 °K / 123 W / 12 800 lm
5192.4 Dissipateur de chaleur en aluminium cintré pour 769_00 / Heatsink in aluminium for 769_00
769_27 RVB-RGB / 96 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
769_31 3 000 °K / 166,4 W / 16 000 lm / IRC ≥ 90769_29 2 800 °K / 123 W / 12 800 lm
769_00 Coupole sans équipement électrique / Dome without LED - (LEDs 640 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
74 KGLivré en 4 éléments d’épaisseur 75 mm / Supplied in 4 elements
769 / MICRO BLADE CIRCLE 200
2200
22
00
110
011
00
Ø2000
75
1700
170
0
85
08
50
Ø 1500
75
AS lighting 2018 IMPRIMEUR 160417.indd 17 16/04/2017 11:39
18
SYSTÈMESMICRO BLADE DOOBLE
MICRO BLADE 25MICRO BLADE 50
MICRO BLADE 50 TURNMICRO BLADE 50 CROSS
MICRO BLADE 35MICRO BLADE 63
MICRO BLADE CADREMICRO BLADE ANGLE
MICRO BLADE CURTAINECO BLADEMINI BLADE
V-BLADEU-BLADEX-BLADE
DESIGNATELIER SEDAP
extract 2018
AS lighting 2018 IMPRIMEUR 160417.indd 18 16/04/2017 11:39
19 extract 2018 19extract 2018
V-BLADE 170
P.46
Réf. 786
Réf. 775
SYSTÈMES BLADE, MINI BLADE, MICRO BLADE, U-BLADE, V-BLADE, X-BLADE & ECO BLADE
SYSTÈME SYSTÈME
U-BLADE 135
Réf. 782
P.48
BLADE
Réf. 740
P.42
MINI BLADE
Réf. 760
P.38
MICRO BLADE 50
Réf. 772
P.26
MICRO BLADE 35
Réf. 770
P.30
MICRO BLADE CADRE
Réf. 779
P.33
MICRO BLADE 25
Réf. 730
P.24
ECO BLADE PLAN
Réf. 733
P.36
MICRO BLADE PLINTHE
Réf. 737
P.32
Réf. 7000
P.22
MICRO BLADE DOOBLE 100
Réf. 7002
P.22
MICRO X-BLADE 35
Réf. 738
P.50
ECO BLADE CORNICHE
Réf. 734
P.36
MICRO BLADE CURTAIN 1-2
Réf. 756-761
P.35
MICRO X-BLADE
Réf. 870
P.50
X-BLADE
Réf. 840
P.50
MINI X-BLADE
Réf. 860
P.50
MICRO BLADE 63
Réf. 771
P.30
U-BLADE 120
Réf. 780
P.46
U-BLADE 120 X 120
Réf. 7004
P.48
MICRO BLADE ANGLE
P.34
MICRO BLADE DOOBLE 50
AS lighting 2018 IMPRIMEUR 160417.indd 19 16/04/2017 11:49
20 extract 2018
ENCASTREMENT PLÂTRE / PLÂTRE Plaster to plaster jointing.
• Profil en plâtre très haute densité - longueur 1 m ou 2 m - à encas-trer et à raccorder dans de la plaque de plâtre ou dans du staff.High-density-plaster profile. To be recessed in plaster or plasterboard.
FINITION PARFAITE ASSURÉE Perfect jointing guaranteed.
• Extrémités et angles préfabriqués. Système d’alignement.Pre-moulded end parts and corners. Alignment system.
GRANDE SOUPLESSE DE CONCEPTION Great freedom of design.
• Positionnement mural - horizontal ou vertical - ou positionnement auplafond. Balisage de circulation et escalier, encadrement de portes.Horizontal or vertical wall mounting, or ceiling mounting. Ideal forcorridors, staircases...
ÉCLAIRAGE CONTINU UNIFORME Homogenous, continnous lighting.
• Profil étudié pour une diffusion et une régularité optimale de lalumière.The plaster profile has been designed for the best light reflection.
SOURCES À ÉCONOMIE D’ÉNERGIE Energy saving systems.
• Fluorescent T5 et flexible Leds haute performance.High performance fluorescent T5 and linear LED lighting.
SYSTÈMES BLADE, MINI BLADE, MICRO BLADE, U-BLADE, V-BLADE & X-BLADELe nouveau concept d’intégration dans l’architecture. The new lighting concept for architecture.
MINI BLADE
AS lighting 2018 IMPRIMEUR 160417.indd 20 16/04/2017 11:49
21 extract 2018
MICRO BLADE 35
SYSTÈMES BLADE, MINI BLADE, MICRO BLADE, U-BLADE, V-BLADE, X-BLADE & ECO BLADE
MICRO BLADE 50
X-BLADE MICRO BLADE 50 CROSS
AS lighting 2018 IMPRIMEUR 160417.indd 21 16/04/2017 11:49
22 extract 2018
MICRO BLADE DOOBLEProfil en plâtre HD à encastrer pour intégration de sources LED dans plafond et mur.Micro Blade dooble est un système d’épaisseur 75 mm spécialement adapté aux cloisons en plaques de plâtre.Micro Blade dooble is a high strength plaster profile for recessing linear LED lighting, 75 mm deep, espe-cially designed for walls and ceilings
MICROBLADEDOOBLE
DESIGN
ATELIER SEDAP
BANDES CADRE SECTIONS CONTINUITÉ MUR/MUR/MUR
7002 / MICRO BLADE DOOBLE 100
AS lighting 2018 IMPRIMEUR 160417.indd 22 16/04/2017 11:50
23 extract 2018
MICRO BLADE DOOBLE
1,20 M1,50 M
LONGUEURDÉSIGNATION
7000 / MICRO BLADE DOOBLE 50
7000 MICRO BLADE DOOBLE 50 Design Atelier Sedap
7000.120 Profil droit 50
RÉFÉRENCE
7000.150 Profil droit 507001 Paire d’extrémités / Pair of end caps
1,20 M1,50 M
LONGUEURDÉSIGNATION
7002 MICRO BLADE DOOBLE 100 Design Atelier Sedap
7002.120 Profil droit 100
RÉFÉRENCE
7002.150 Profil droit 1007003 Paire d’extrémités / Pair of end caps
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
MICRO BLADE DOOBLE 50
MICRO BLADE DOOBLE 100
7000 / MICRO BLADE DOOBLE 50
7002 / MICRO BLADE DOOBLE 100
OPTIONS FEUILLES RÉFLÉCHIS-SANTESantes50
50
100
AS lighting 2018 IMPRIMEUR 160417.indd 23 16/04/2017 11:50
24 extract 2018
MICRO BLADE 25Profil en plâtre HD conçu pour intégration par aimants de balisage LED en encastrement sur rail dans pla-fonds et murs. Micro Blade 25 est un système d’épaisseur 53mm spécialement adapté aux cloisons en plaquesde plâtre.Micro Blade 25 is a high strength plaster profile for recessing linear LED with magnets, for ambiant light-ing, 53mm deep, especially designed for walls and ceilings.
MICRO BLADE 25 DESIGNATELIER SEDAP
BANDES CADRE SECTIONS CONTINUITÉ MUR/MUR/MUR
730 731 / MICRO BLADE 25
AS lighting 2018 IMPRIMEUR 160417.indd 24 16/04/2017 11:50
25 extract 2018
MICRO BLADE 25
25 118
56
MICRO BLADE 25
730 / MICRO BLADE 25
1,20 M
1 M
LONGUEURDÉSIGNATION
730-731-732 MICRO BLADE 25 Design Atelier Sedap
730.120 Profil droit encsatrement mur ou plafond
RÉFÉRENCE
736 Paire d’extrémités / Pair of end caps5198 Écran transparent et dissipateur de chaleur aimantable
Transparent screen and aluminum, magnetizable heatsink1,36 x 0,23 M1,25 M
731 Profil cintré (rayon 2 M - 10 éléments pour 1 cercle)5198.R2 Écran et alu pour ARC2 / Screen and heat sink for ARC2732 Profil cintré (rayon 4 M - 20 éléments pour 1 cercle)
Écran et alu pour ARC4 / Screen and heat sink for ARC45198.R41,30 x 0,20 M1,25 M
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
731 / MICRO BLADE 25-R2
732 / MICRO BLADE 25-R4
730 / MICRO BLADE 25
1360
1230
1240
1300
230
200
AS lighting 2018 IMPRIMEUR 160417.indd 25 16/04/2017 11:51
MICROBLADE 50
DESIGN
ATELIER SEDAP
772 / MICRO BLADE 5026
AS lighting 2018 IMPRIMEUR 160417.indd 26 16/04/2017 11:51
27 extract 2018
MICRO BLADE 50
2,6 KG3,25 KG 50
50
165
35
POIDS
773 / MICRO BLADE 50 TURN
Vissage
Ecran diffusant
Flexible LEDsur profilaluminium
Enduit - colle àbase de plâtre,acrylique oupolyester pourcollage et lissage
772 / MICRO BLADE 50
1,20 M1,50 M
LONGUEURDÉSIGNATION
772 MICRO BLADE 50 Design Atelier Sedap
772.120 Profil droit
RÉFÉRENCE
772.150 Profil droit778 Paire d’extrémités / Pair of end caps
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
45 MM
2,6 KG3,25 KG
POIDS
1,20 M1,50 M
LONGUEURDÉSIGNATION
772R MICRO BLADE 50 POSE RAIL Design Atelier Sedap
772.120R Profil droit pose rail
RÉFÉRENCE
772.150R Profil droit pose rail778 Paire d’extrémités / Pair of end caps 45 MM
772R / MICRO BLADE 50POSE RAIL
AS lighting 2018 IMPRIMEUR 160417.indd 27 16/04/2017 11:51
28 extract 2018
572 x 572 MM
83 cm LEDs strip needed to be fixed outside the circleNécessite 83 cm de flex LEDs fixé à l’extérieur du cercle
7 KG
572
572
500
50
55
DIMENSIONS
MICROBLADE
50 TURN
DESIGN
ATELIER SEDAP
773 / MICRO BLADE 50 TURN
MICRO BLADE 50 TURNProfil en plâtre HD à encastrer pour intégration de sources LED dans plafonds et murs.Micro Blade est un système d’épaisseur 55 mm spécialement adapté aux cloisons en plaques de plâtre.Micro Blade is a high strength plaster profile for recessing linear LED lighting.55 mm deep, especially designed for walls and ceilings.
POIDSDÉSIGNATION
773 MICRO BLADE 50 TURN Design Atelier Sedap
773 Profil type Micro Blade 50 en arrondi
RÉFÉRENCE
Micro Blade 50 profile in rounded shapeLivré sans LEDs / Supplied without LEDs
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
AS lighting 2018 IMPRIMEUR 160417.indd 28 16/04/2017 11:51
29 extract 2018
MICRO BLADE 50 CROSSProfil en plâtre HD à encastrer pour intégration de sources LED dans plafonds et murs.Micro Blade est un système d’épaisseur 55 mm spécialement adapté aux cloisons en plaques de plâtre.Micro Blade is a high strength plaster profile for recessing linear LED lighting.55 mm deep, especially designed for walls and ceilings.
500
382
360
360
MICROBLADE50 CROSS
DESIGN
ATELIER SEDAP
764 / MICRO BLADE CROSS 50 60/120
500 x 382 MM 3 KG
DIMENSIONS POIDSDÉSIGNATION
764 MICRO BLADE CROSS 60/120 Design Atelier Sedap
764 Profil type Micro Blade 50 en croix 60/120
RÉFÉRENCE
Micro Blade 50 cross 60/120 profileLivré sans LEDs / Supplied without LEDs
360 x 360 MM 3 KG
DIMENSIONS POIDSDÉSIGNATION
765 MICRO BLADE CROSS 90/90 Design Atelier Sedap
765 Profil type Micro Blade 50 en croix 90/90
RÉFÉRENCE
Micro Blade 50 cross 90/90 profileLivré sans LEDs / Supplied without LEDs
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
AS lighting 2018 IMPRIMEUR 160417.indd 29 16/04/2017 11:51
30 extract 2018
Profil en plâtre HD à encastrer pour intégration de sources LED dans plafond et mur.Micro Blade est un système d’épaisseur 55 mm spécialement adapté aux cloisons en plaques de plâtre.Micro Blade is a high strength plaster profile for recessing linear LED lighting, 55mm deep, especiallydesigned for walls and ceilings.
BANDES CADRE SECTIONS CONTINUITÉ MUR/MUR/MUR
MICRO BLADE 35 & 63
MICROBLADE
35 & 63
DESIGN
ATELIER SEDAP
MICRO BLADE 35
770 / MICRO BLADE 35
AS lighting 2018 IMPRIMEUR 160417.indd 30 16/04/2017 11:52
31 extract 2018
50
35
115
56
63
165
MICRO BLADE 35 & 63
Vissage
Flexible LEDsur profilaluminium
Ecran diffusant
Enduit - colle àbase de plâtre,acrylique oupolyester pourcollage et lissage
771 / MICRO BLADE 63 770 / MICRO BLADE 35
771 / MICRO BLADE 63
771 / MICRO BLADE 63
MICRO BLADE 63
1,20 M 2 KG
POIDSDÉSIGNATION
770 MICRO BLADE 35 Design Atelier Sedap
770.120 Profil droit
RÉFÉRENCE
Profil droitPaire d’extrémités / Pair of end caps
770.150776
2,5 KG1,50 M40 MM
1,20 M 2,5 KG
POIDSDÉSIGNATION
771 MICRO BLADE 63 Design Atelier Sedap
771.120 Profil droit
RÉFÉRENCE
Profil droitPaire d’extrémités / Pair of end caps
771.150777
3,1 KG1,50 M45 MM
LONGUEUR
LONGUEUR
AS lighting 2018 IMPRIMEUR 160417.indd 31 16/04/2017 11:52
32 extract 2018
MICRO BLADE PLINTHE
737 / MICRO BLADE PLINTHE
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
1,20 M
DÉSIGNATION
737 MICRO BLADE PLINTHE Design Atelier Sedap
737.120 Profil droit encastrement mur
RÉFÉRENCE
Profil droit encastrement mur737.150 1,50 M1 M
LONGUEUR
5198 Écran transparent et dissipateur de chaleur aimantableTransparent screen and aluminum, magnetizable heatsink
MICROBLADE
PLINTHE
DESIGN
ATELIER SEDAP
Profil en plâtre HD à encastrer pour intégration de sources LED dans mur.Micro Blade is a high strength plaster profile for recessing linear LED lighting, 55mm deep, especiallydesigned for walls.
MICRO BLADE PLINTHE
MUR
50
90
56
AS lighting 2018 IMPRIMEUR 160417.indd 32 16/04/2017 11:52
33 extract 2018
PLAFOND MUR
Profil en plâtre HD à encastrer pour intégration de sources LED dans plafond et mur.Micro Blade is a high strength plaster profile for recessing linear LED lighting, 60mm deep, especiallydesigned for walls and ceilings.
MICRO BLADE CADRE
170
60
40
35
35
779 / MICRO BLADE CADRE 779 / MICRO BLADE CADRE
MICROBLADECADRE
DESIGN
ATELIER SEDAP
MICRO BLADE CADRE
1,20 M 2,5 KG
POIDSDÉSIGNATION
779 MICRO BLADE CADRE Design Atelier Sedap
779.120 Profil droit
RÉFÉRENCE
Profil droit779.150 3,1 KG1,50 M
LONGUEUR
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
AS lighting 2018 IMPRIMEUR 160417.indd 33 16/04/2017 11:52
34 extract 2018
MUR PLAFOND
Profil en plâtre HD à encastrer pour intégration de sources LED dans plafond et mur.Micro Blade is a high strength plaster profile for recessing linear LED lighting, 54mm deep, especiallydesigned for walls and ceilings.
MICRO BLADE ANGLE
775 / MICRO BLADE ANGLE
MICROBLADEANGLE
DESIGN
ATELIER SEDAP
MICRO BLADE ANGLE
1,20 M 2,8 KG
POIDSDÉSIGNATION
775 MICRO BLADE ANGLE Design Atelier Sedap
775.120 Profil droit
RÉFÉRENCE
Profil droit775.150 3,5 KG1,50 M
LONGUEUR
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
27
124
54
50
35
133
33
AS lighting 2018 IMPRIMEUR 160417.indd 34 16/04/2017 11:52
35 extract 2018
MICRO BLADECURTAIN
DESIGN
ATELIER SEDAP
MICRO BLADE CURTAINProfil en plâtre HD à encastrer pour intégration de sources LEDsdans plafond et mur.Micro blade est un système spécialement adapté aux cloisons enplaques de plâtre.Micro blade is a high strength plaster profile for recessinglinear LEDs lighting, especially designed for walls and ceilings.
MICRO BLADE CURTAIN 2
MICRO BLADE CURTAIN 1
120
110
180
132
73
115
185
85
1,20 M
DÉSIGNATION
761 MICRO BLADE CURTAIN 1 Design Atelier Sedap
761.120 Profil droit
RÉFÉRENCE
Profil droit761.150 1,50 M
LONGUEUR
1,20 M
DÉSIGNATION
756 MICRO BLADE CURTAIN 2 Design Atelier Sedap
756.120 Profil droit
RÉFÉRENCE
Profil droit756.150 1,50 M
LONGUEUR
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
756 / MICRO BLADE CURTAIN
761 / MICRO BLADE CURTAIN 1
AS lighting 2018 IMPRIMEUR 160417.indd 35 16/04/2017 11:52
36 extract 2018
ECO BLADE DESIGNATELIER SEDAP
Profils en plâtre HD pour intégration d’éclairage LED dans plafonds et murs (encastrement ou saillie).Eco Blade est un système d’épaisseur 55 mm spécialement adapté aux cloisons en plaques de plâtre.Eco Blade 25 is a high strength plaster profile for linear LED lighting, 55mm deep, especially designedfor walls and ceilings (recessed or surface-mounted).
ECO BLADE
BANDES CADRE SECTIONS CONTINUITÉ MUR/MUR/MUR
733 / ECO BLADE PLAN
AS lighting 2018 IMPRIMEUR 160417.indd 36 16/04/2017 11:52
37 extract 2018
ECOBLADE
63
75
43
103
68 137
55
35
30
104 positions possibles
733 / ECO BLADE PLAN 734 / ECO BLADE CORNICHE
1,20 M
1 M
LONGUEURDÉSIGNATION
733 ECO BLADE PLAN Design Atelier Sedap
733.120 Profil droit encsatrement mur ou plafond
RÉFÉRENCE
733.150 Profil droit encsatrement mur ou plafond5197 Écran transparent et dissipateur de chaleur
Transparent screen and aluminum heatsink
1,50 M
1,20 M
1 M
LONGUEURDÉSIGNATION
734 ECO BLADE CORNICHE Design Atelier Sedap
734.120 Profil droit angle
RÉFÉRENCE
734.150 Profil droit angle
5197 Écran transparent et dissipateur de chaleurTransparent screen and aluminum heatsink
1,50 M1,20 M735.120 Moulure pour pose Eco Blade Corniche en saillie
735.150 Moulure pour pose Eco Blade Corniche en saillie 1,50 M
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
734 / ECO BLADE CORNICHE
733 / ECO BLADE PLAN
734 / ECO BLADE CORNICHE
735 / ECO BLADE MOULURE
AS lighting 2018 IMPRIMEUR 160417.indd 37 16/04/2017 11:52
38 extract 2018
Profil en plâtre HD à encastrer pour intégration de sources LED dans plafond et mur.Mini Blade est un système d’épaisseur 55 mm spécialement adapté aux cloisons en plaques de plâtre.Mini Blade is a high strength plaster profile for recessing linear LED lighting, 55mm deep,especially designed for walls and ceilings.
BANDES CADRE SECTIONS CONTINUITÉ MUR/MUR/MUR
MINI BLADE
MINI BLADE
DESIGN
ATELIER SEDAP
760 / MINI BLADE
AS lighting 2018 IMPRIMEUR 160417.indd 38 16/04/2017 11:53
39 extract 2018
MINI BLADE
760 / MINI BLADE
760 / MINI BLADE
AS lighting 2018 IMPRIMEUR 160417.indd 39 16/04/2017 11:53
MINI BLADE
40
760 / MINI BLADE
AS lighting 2018 IMPRIMEUR 160417.indd 40 16/04/2017 11:53
41 extract 2018
MINI BLADE
760 / MINI BLADE
Vissage plaque / rail
Largeur minimum 5 mm
Vissage Blade / rail
Ecran diffusant
Flex LED sur profilaluminium
Plaque de fixation del’équipement électrique
Enduit - colle à base deplâtre, acrylique oupolyester pour collageet lissage
Rail de fixation en métal
35
41
40
55
90
100
230
6,6 KG8,2 KG
POIDS
1,20 M1,50 M
LONGUEURDÉSIGNATION
760 MINI BLADE Design Atelier Sedap
760.120 Profil droit encastrement mur ou plafond
RÉFÉRENCE
760.150 Profil droit encastrement mur ou plafond766 Paire d’extrémités / Pair of end caps 60 MM0110511324 Support pour intégration d’alimentation
Power supply recessed system
760 / MINI BLADE
MINI BLADE
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
AS lighting 2018 IMPRIMEUR 160417.indd 41 16/04/2017 11:53
42 extract 2018
Profil en plâtre HD à encastrer pour intégration de sources fluorescentesT5 ou LED dans plafond et mur.High strength plaster profile for recessing T5 fluo or linear LED lighting in walls and ceilings.
740 / BLADE
BANDES CADRE SECTIONS CONTINUITÉ MUR/MUR/MUR
BLADE
AS lighting 2018 IMPRIMEUR 160417.indd 42 16/04/2017 11:53
43 extract 2018
740 / BLADE
BLADE
BLADE
740 / BLADE
740 / BLADE
AS lighting 2018 IMPRIMEUR 160417.indd 43 16/04/2017 11:53
44 extract 2018
BLADE
740 / BLADE
740 / BLADE
AS lighting 2018 IMPRIMEUR 160417.indd 44 16/04/2017 11:53
45 extract 2018
200 cm
27
100 cm
27
27
27
27
27
27
27
27
27
1515
1515
27
23
27
23
BLADE
Vissage plaque / rail
Largeur minimum 5 mm
Vissage Blade / rail
Rail de fixation en métal
Diffuseur polycarbonate
Tube ou Flex LED
Point de suspensionpour pose en plafond
Plaque de fixation del’équipement électrique
Enduit - colle à base deplâtre, acrylique ou poly-ester pour collage et lis-sage
140 mm
7,2 KG14,6 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
740 BLADE Design Atelier Sedap
740.1 Profil droit
RÉFÉRENCE
740.2 Profil droit
2,2 KG2,4 KG
POIDS
0,27 M0,27 M
LONGUEURDÉSIGNATION
741 Angle droit descendant 90°
RÉFÉRENCE
742 Angle arrondi descendant 90°
2,2 KG2,4 KG
POIDS
0,27 M0,27 M
LONGUEURDÉSIGNATION
754 Angle droit descendant 270°
RÉFÉRENCE
755 Angle arrondi descendant 270°
3,5 KG
POIDS
0,15 M
LONGUEURDÉSIGNATION
748 Angle mur-mur / mur-plafond
RÉFÉRENCE
Wall to wall/ wall to ceiling corner
2 KG2 KG
POIDS
0,15 M0,15 M
LONGUEURDÉSIGNATION
743.2 Paire extrémité gauche / Pair of left end caps
RÉFÉRENCE
745.2 Paire extrémité droite /Pair of right end caps2 KG750 1 x 743 + 1 x 7452 KG0,15 M744.2 Paire extrémité arrondie gauche
Pair of rounded right end caps2 KG0,15 M746.2 Paire extrémité arrondie droite
Pair of rounded right end caps2 KG751 1 x 744 + 1 x 746
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
AS lighting 2018 IMPRIMEUR 160417.indd 45 16/04/2017 11:53
46 extract 2018
786 / V-BLADE 170
780 / U-BLADE 120
786 / V-BLADE 170
BANDES INTERSECTION CADRE SECTIONS
Profil en V ou en U en plâtre HD à encastrer pour intégration libre (par scie cloche) de sources MR16, GU10ou LED COB.High strength, V-shaped or U-shaped plaster profile for recessing MR16, GU10 or LED COB downlights in wallsand ceilings (hole cutter).
V-BLADE 170 & U-BLADE 120
AS lighting 2018 IMPRIMEUR 160417.indd 46 16/04/2017 11:57
47 extract 2018
780 / U-BLADE 120786 / V-BLADE 170
V-BLADE 170 & U-BLADE 120
70
120
170
220
270
60 int
85 int100
120
4 KG8 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
786 V-BLADE 170 Design Atelier Sedap
786.1 Profil droit encastrement mur ou plafond
RÉFÉRENCE
786.2 Profil droit encastrement mur ou plafond
787 Paire d’extrémités / Pair of end caps 50 MM
140 MMHauteur d’encastrement hors toutOverall dimension
4,5 KG9 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
780 U-BLADE 120 Design Atelier Sedap
780.1 Profil droit encastrement mur ou plafond
RÉFÉRENCE
780.2 Profil droit encastrement mur ou plafond
781 Paire d’extrémités / Pair of end caps 45 MM
150 MMHauteur d’encastrement hors toutOverall dimension
ÉQUIPEMENT MR16, GU10 & LED COB U-BLADE 120 & V-BLADE 170
011100291-1 Spot MR16 blanc - P. maxi: 50 W / GU5.3 - 12V
Ampoule non fournie / White or black downlight (bulb not included)
RÉFÉRENCE SOURCES
011100294-0 Spot GU10 blanc ou noir - P. maxi: 50 W / GU10 - 230VAmpoule et alimentation non fournies / White downlight (bulb and power supply not included)
Alimentation incluse / Power supply included011060168-0 Spot LED COB IP65 blanc - P. maxi: 9 W / 200 mA / 650 lm / 2 700 °K / 55°
AS lighting 2018 IMPRIMEUR 160417.indd 47 16/04/2017 11:57
48 extract 2018
BANDES INTERSECTION CADRE SECTIONS
Profils en U en plâtre HD à encastrer pour intégration libre dans plafond de boîtiers avec sources QR111 ou despots encastrés MR16, GU10 ou LED COB.High strength, U-shaped plaster profiles for recessing in ceilings QR111 boxes or MR16, GU10 or LED COBdownlights.
U-BLADE 120 x 120 & U-BLADE 135
7004 / U-BLADE 120 x 120
U-BLADE120 x 120
DESIGN
ATELIER SEDAP
U-BLADE
AS lighting 2018 IMPRIMEUR 160417.indd 48 16/04/2017 11:57
49 extract 2018
011100287/BOÎTIER 1 QR111 NOIR 011100288/BOÎTIER 2 QR111 NOIR 011100289/BOÎTIER 3 QR111 NOIR
782 / U-BLADE 135
U-BLADE 120 X 120 & U-BLADE 135
Plus d’informations et photométrie sur sedap.com / More data and photometry available at sedap.com
85 int95
135
235
cale bois60 x 8 mm
782 / U-BLADE 135 détail
120 int130
120
220
782 / U-BLADE 135
ÉQUIPEMENT MR16, GU10 & LED COB U-BLADE 135 & U-BLADE 120 X 120
011100291-1 Spot MR16 blanc - P. maxi: 50 W / GU5.3 - 12V
Ampoule non fournie / White or black downlight (bulb not included)
RÉFÉRENCE SOURCES
011100294-0 Spot GU10 blanc ou noir - P. maxi: 50 W / GU10 - 230VAmpoule et alimentation non fournies / White downlight (bulb and power supply not included)
ÉQUIPEMENT QR111 U-BLADE 135
011100287-1 Boîtier QR111 - Orientable noir ou blanc - P. maxi: 75 W / G53 - 12V / Longueur boîtier: 133 mm
Ampoules et alimentation non fournies / Adjustable white downlight (bulbs and power supply not included)
RÉFÉRENCE SOURCES
011100288-0 Boîtier QR111 - Orientables noir ou blanc - P. maxi: 2 x 75 W / G53 - 12V / Longueur boîtier: 260 mmAmpoule et alimentation non fournies / Adjustable white downlight (bulb and power supply not included)
Ampoules et alimentation non fournies / Adjustable white downlight (bulbs and power supply not included)011100289-0 Boîtier QR111 - Orientables noir ou blanc - P. maxi: 3 x 75 W / G53 - 12V / Longueur boîtier: 385 mm
5 KG10 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
7004 U-BLADE 120 x 120 Design Atelier Sedap
7004.1 Profil droit encastrement mur ou plafond
RÉFÉRENCE
7004.2 Profil droit encastrement mur ou plafond
7005 Paire d’extrémités / Pair of end caps, 50 MM
210 MMHauteur d’encastrement hors toutOverall dimension
5 KG10 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
782 U-BLADE 135 Design Atelier Sedap
782.1 Profil droit encastrement mur ou plafond
RÉFÉRENCE
782.2 Profil droit encastrement mur ou plafond
783 Paire d’extrémités / Pair of end caps, 50 MM
120 MMHauteur d’encastrement hors toutOverall dimension
Alimentation incluse / Power supply included011060168-0 Spot LED COB IP65 blanc - P. maxi: 9 W / 200 mA / 650 lm / 2 700 °K / 55°
AS lighting 2018 IMPRIMEUR 160417.indd 49 16/04/2017 11:57
50 extract 2018
BANDES CADRE SECTIONS CONTINUITÉ MUR/MUR/PLAFOND MUR/MUR/MUR
Structures d’éclairage indirect mural ou de plafond, sans encastrement (Flex LEDs ou tubes).Wall or ceiling indirect lighting system. Surface-mounted structures (LED strips or tubes).
X-BLADE, MINI X-BLADE & MICRO X-BLADE
X-BLADE
DESIGN
ATELIER SEDAP
840 / X-BLADE
7,2 KG14,6 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
840 X-BLADE Design Atelier Sedap
840.1 Profil droit
RÉFÉRENCE
840.2 Profil droit0,15 MPaire d’extrémités gauche et droite
Pair of left and right end caps846
110 100
100
40
135
AS lighting 2018 IMPRIMEUR 160417.indd 50 16/04/2017 11:57
51 extract 2018
X-BLADE, MINI X-BLADE & MICRO X-BLADE
860 / MINI X-BLADE
205050
3560
100 2060
60 35
870 / MICRO X-BLADE
1,20 M
DÉSIGNATION
738 MICRO X-BLADE 35 Design Atelier Sedap
738.120 Profil droit à coller-visser
RÉFÉRENCE
Profil droit à coller-visser738.150 1,50 M
5 M
LONGUEUR
739 Paire d’embouts / Pair of end capsRouleau de lexan diffusant / Roll if diffusing PMMA(longueur sur demande jusqu’à 50m / up to 50m on request)
5176
50
30
35
8,2 KG
POIDS
1,50 M0,15 M
LONGUEURDÉSIGNATION
860 MINI X-BLADE Design Atelier Sedap
860 Profil droit
RÉFÉRENCE
866 Paire d’extrémités gauche et droitePair of left and right end caps
5 MRouleau de lexan diffusant / Roll if diffusing PMMA(longueur sur demande jusqu’à 50m / up to 50m on request)
5176
3,1 KG
POIDS
1,50 M0,15 M
LONGUEURDÉSIGNATION
870 MICRO X-BLADE Design Atelier Sedap
870 Profil droit
RÉFÉRENCE
876 Paire d’extrémités gauche et droitePair of left and right end caps
5 MRouleau de lexan diffusant / Roll if diffusing PMMA(longueur sur demande jusqu’à 50m / up to 50m on request)
5176
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
AS lighting 2018 IMPRIMEUR 160417.indd 51 16/04/2017 11:58
52 extract 2018
Profils en plâtre HD à coller et à visser pour éclairage indirect avec source flex LED.Micro Corniche is a high strength plaster profile for indirect linear LED lighting.
MICRO CORNICHES
DESIGN
ATELIER SEDAP
188 / AILE 189 / LIGNE
187 / CALE190 / DOUCINE
CALE
AS lighting 2018 IMPRIMEUR 160417.indd 52 16/04/2017 11:58
53 extract 2018
MICRO CORNICHES
50
75
50
35
57
37
57
47
188 / AILE
2,8 KG3,5 KG
POIDS
1,20 M1,50 M
LONGUEURDÉSIGNATION
187 CALE Design Atelier Sedap
187.120 Profil droit en plâtre haute dureté
RÉFÉRENCE
187.150 Profil droit en plâtre haute dureté
Équipement flexibles LEDs en option
1,6 KG2 KG
POIDS
1,20 M1,50 M
LONGUEURDÉSIGNATION
188 AILE Design Atelier Sedap
188.120 Profil droit en plâtre haute dureté
RÉFÉRENCE
188.150 Profil droit en plâtre haute dureté
Équipement flexibles LEDs en option
2,4 KG3 KG
POIDS
1,20 M1,50 M
LONGUEURDÉSIGNATION
189 LIGNE Design Atelier Sedap
189.120 Profil droit en plâtre haute dureté
RÉFÉRENCE
189.150 Profil droit en plâtre haute dureté
Équipement flexibles LEDs en option
2 KG2,5 KG
POIDS
1,20 M1,50 M
LONGUEURDÉSIGNATION
190 DOUCINE Design Atelier Sedap
190.120 Profil droit en plâtre haute dureté
RÉFÉRENCE
190.150 Profil droit en plâtre haute dureté
Équipement flexibles LEDs en option
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
AS lighting 2018 IMPRIMEUR 160417.indd 53 16/04/2017 11:58
54 extract 2018
Profils en plâtre HD à coller et à visser pour éclairage indirect avec source tubes ou flex LED.Corniche is a high strength plaster profile for indirect tube or linear LED lighting.
CORNICHES
197/CORNICHE 198/CORNICHE
250
80
150
80
198 / CORNICHE
CORNICHES
DESIGN
ATELIER SEDAP
199/CORNICHE
11,7 KG8,7 KG
POIDS
2,50 M2,50 M
LONGUEURDÉSIGNATION
197, 198 & 199 CORNICHES Design Atelier Sedap
197 Profil droit en plâtre haute dureté
RÉFÉRENCE
198 Profil droit en plâtre haute dureté
Équipement flexibles LEDs ou tubes en option
7 KG2,50 M199 Profil droit en plâtre haute dureté
80
100
AS lighting 2018 IMPRIMEUR 160417.indd 54 16/04/2017 11:58
55 extract 2018
197 / CORNICHE
CORNICHES
194/CORNICHE
130
45
45
190
195/CORNICHE
50
17045
230
191/CORNICHE
130
40
45140
192/CORNICHE
35
45135
130
193/CORNICHE
45
45135
125
6,5 KG8 KG
POIDS
2,50 M
LONGUEURDÉSIGNATION
191-192-193-194-195 CORNICHES Design Atelier Sedap
191 Profil droit en plâtre haute dureté
RÉFÉRENCE
Équipement flexibles LEDs ou fluo T5 en option
192 Profil droit en plâtre haute dureté 2,50 M7,6 KG2,50 M193 Profil droit en plâtre haute dureté8,3 KG194 Profil droit en plâtre haute dureté 2,50 M8,9 KG2,50 M195 Profil droit en plâtre haute dureté
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
AS lighting 2018 IMPRIMEUR 160417.indd 55 16/04/2017 11:58
56 extract 2018
Corniches en plâtre HD en éléments compris entre 1,75 m et 2,50 m, augmentées d’une moulure pour recevoirun profilé aluminium support de LED.High-density plaster cornices, available in elements from 1.75 to 2.50m, with an added molding designed toreceive an LED lighting equipment and its aluminium heatsink profile.
CORNICHES AUTO ÉCLAIRANTES
124 / CORNICHE AUTO-ÉCLAIRANTE
CORNICHESAUTO-ÉCLAIRANTES
DESIGN
ATELIER SEDAP
1,75 M
DÉSIGNATION
124 STYLE LOUIS XV Design Atelier Sedap
124 Mini corniche
RÉFÉRENCE LONGUEUR 140
140
AS lighting 2018 IMPRIMEUR 160417.indd 56 16/04/2017 11:58
57
125 / CORNICHE AUTO-ÉCLAIRANTE 126 / CORNICHE AUTO-ÉCLAIRANTE 127 / CORNICHE AUTO-ÉCLAIRANTE
2,50 M
DÉSIGNATION
133 STYLE LOUIS XV Design Atelier Sedap
133 Profil droit staff traditionnel
RÉFÉRENCE LONGUEUR
Corniche livrée en deux éléments
2,50 M
DÉSIGNATION
125 STYLE EMPIRE Design Atelier Sedap
125 Profil droit staff traditionnel
RÉFÉRENCE LONGUEUR
Corniche livrée en deux éléments
2,50 M
DÉSIGNATION
126 STYLE LOUIS XV Design Atelier Sedap
126 Profil droit staff traditionnel
RÉFÉRENCE LONGUEUR
Corniche livrée en deux éléments
2,50 M
DÉSIGNATION
127 STYLE CLASSIQUE Design Atelier Sedap
127 Profil droit staff traditionnel
RÉFÉRENCE LONGUEUR
Corniche livrée en deux éléments
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
170
190
210
180
230
170
210
240
AS lighting 2018 IMPRIMEUR 160417.indd 57 16/04/2017 11:58
5858 extract 2018
SYSTEMS
SYSTÈMES08-57
60-90RECESSED & SEMI-RECESSED LAMPS
ENCASTRÉS & SEMI-ENCASTRÉS
AS lighting 2018 IMPRIMEUR 160417.indd 58 16/04/2017 11:58
5959 extract 2018
62
60
66
683207/TROCADÉRO DOUBLE 3204/ANTIQAL ROND3206/TROCADÉRO ROND
MINISTAR
3043/TIQAL CARRÉ 3067/TIQAL DOUBLE3065/TIQAL ROND 3066/TIQAL 30°
3073/IPL TBT 12-33072/IPL TBT 12-23071/IPL TBT 12-1
70
74
76
78
80
72
3041/SLOT XL4 3042/SLOT XL5
1966/SLOT
3029/SLOT XL33030/SLOT XL23031/SLOT XL1
1965/SPHÈRE 1967/SQUARE1961/EGG 1962/FLAM
1663/ RECTANGLE 1666/CARRÉ1662/GRAND ROND1660/ PETIT ROND
82
3205/ANTIQAL DOUBLE
MINI TIQAL
3061/STAR 3062/DIAMANT3060/HAUSSMANN
3202/SLIM SLOT XL 3203/SLIM SLOT XL3201/SLIM SLOT XL3200/SLIM SLOT XL
86
84
SLIM LINE
MICRO & MINI TIQAL LED
SPOTS COMPACTS 3124/DAG ROND 3125/DAG ELLIPSE
3114/TRAPPE TECH 3117/TRAPPE TECH3115/TRAPPE TECH 3116/TRAPPE TECH
3224/QUADRAT 10 3225/QUADRAT 15
3226/ELLIPSE
3139/SLOT DOUBLE
88
AS lighting 2018 IMPRIMEUR 160417.indd 59 16/04/2017 11:59
60 extract 2018
MINISTAREncastré de plafond en plâtre HD spécialement adaptée aux cloisons sèches.Équipement LED COB. Hauteur d’encastrement de 100 mm.High-strength plaster fitting especially designed to be easily recessed in plasterboard ceilings.LED COB equipment. Recessed dimension 100 mm.
MINISTAR
DESIGN
ATELIER SEDAP
3256 / MINISTAR
AS lighting 2018 IMPRIMEUR 160417.indd 60 16/04/2017 11:59
61 extract 2018
MINISTAR
3256/MINISTAR
3256 MINISTAR Design Atelier Sedap
3256_06
1,5 KG
Circuit 3 LED 4,4 W / 2 900 °K / 400 lm / 12VDC / IP 20 / dimmable
RÉFÉRENCE SOURCES Alimentation non incluse / Power supply not included
3256 / MINISTAR
200
200
ø120
Plus d’informations sur sedap.com / More info on sedap.com
AS lighting 2018 IMPRIMEUR 160417.indd 61 16/04/2017 11:59
62 extract 2018
MINI TIQALGamme d’encastrés de plafond en plâtre HD spécialement adaptée aux cloisons sèches.Équipement retrofit au choix (MR16 ou GU10) ou LED COB. Hauteur d’encastrement de 140 mm.High-strength plaster fittings especially designed to be easily recessed in plasterboard ceilings.Retrofit equipment between MR16 and GU10 or LED COB. Recessed dimension 140mm.
MINI TIQAL
DESIGN
ATELIER SEDAP
3234 / MINI TIQAL 3 SPOTS
AS lighting 2018 IMPRIMEUR 160417.indd 62 16/04/2017 11:59
63 extract 2018
160
245
315
160
220
245
160
160
ø55
MINI TIQAL
3233 / MINI TIQAL 3 SPOTS
3231 MINI TIQAL 1 SPOT Design Atelier Sedap
3231_65
1,5 KG
1 spot MR16 (blanc ou noir) - P. maxi 50 W / GX5.3 - Hauteur d’encastrement hors-tout : 100 mm
RÉFÉRENCE SOURCES
3231_75 1 spot GU10 (blanc ou noir) - P. maxi 50 W / GU10 / 230V - Hauteur d’encastrement hors-tout : 122 mm3231_85 1 spot MR16 IP44 (blanc ou noir) - P. maxi 35 W / GX5.3 - Hauteur d’encastrement hors-tout : 119 mm
Ampoule et alimentation non fournies
3231_95 1 spot LED COB IP54 (blanc ou noir) - P. maxi 11,2 W / 1 175 lm / 350mA / 22° / 3 000 °KHauteur d’encastrement hors tout : 140 mm
3232 MINI TIQAL 2 SPOTS Design Atelier Sedap
3232_65
1,5 KG
2 spots MR16 (blanc ou noir) - P. maxi 2 x 50 W / GX5.3 - Hauteur d’encastrement hors-tout : 100 mm
RÉFÉRENCE SOURCES
3232_75 2 spots GU10 (blanc ou noir) - P. maxi 2 x 50 W / GU10 / 230V - Hauteur d’encastrement hors-tout : 122 mm3232_85 2 spots MR16 IP44 (blanc ou noir) - P. maxi 2 x 35 W / GX5.3 - Hauteur d’encastrement hors-tout : 119 mm
Ampoule et alimentation non fournies
3232_95 2 spots LED COB IP54 (blanc ou noir) - P. maxi 2 x 11,2 W / 2 350 °K / 350mA / 22° / 3 000 °KHauteur d’encastrement hors tout : 140 mm
3233 MINI TIQAL 3 SPOTS Design Atelier Sedap
3233_65
1,5 KG
3 spots MR16 (blanc ou noir) - P. maxi 3 x 50 W / GX5.3 - Hauteur d’encastrement hors-tout : 100 mm
RÉFÉRENCE SOURCES
3233_75 3 spots GU10 (blanc ou noir) - P. maxi 3 x 50 W / GU10 / 230V - Hauteur d’encastrement hors-tout : 122 mm3233_85 3 spots MR16 IP44 (blanc ou noir) - P. maxi 3 x 35 W / GX5.3 - Hauteur d’encastrement hors-tout : 119 mm
Ampoule et alimentation non fournies
3233_95 3 spots LED COB IP54 (blanc ou noir) - P. maxi 3 x 11,2 W / 3 500 lm / 350mA / 22° / 3 000 °K Hauteur d’encastrement hors tout : 140 mm
3234 MINI TIQAL 3 SPOTS Design Atelier Sedap
3234_65
1,5 KG
3 spots MR16 (blanc ou noir) - P. maxi 3 x 50 W / GX5.3 - Hauteur d’encastrement hors-tout : 100 mm
RÉFÉRENCE SOURCES
3234_75 3 spots GU10 (blanc ou noir) - P. maxi 3 x 50 W / GU10 / 230V - Hauteur d’encastrement hors-tout : 122 mm3234_85 3 spots MR16 IP44 (blanc ou noir) - P. maxi 3 x 35 W / GX5.3 - Hauteur d’encastrement hors-tout : 119 mm
Ampoule et alimentation non fournies
3233_95 3 spots LED COB IP54 (blanc ou noir) - P. maxi 3 x 11,2 W / 3 500 lm / 350mA / 22° / 3 000 °K Hauteur d’encastrement hors tout : 140 mm
AS lighting 2018 IMPRIMEUR 160417.indd 63 16/04/2017 11:59
64 extract 2018
MICRO & MINI TIQAL LEDGamme d’encastrés de plafond en plâtre HD spécialement adaptée aux cloisons sèches.Équipement retrofit au choix (MR16 ou GU10) ou LED COB IP54.High-strength plaster fittings especially designed to be easily recessed in plasterboard ceilings.Retrofit equipment between MR16 and GU10 or LED COB IP54.
3235 / MICRO TIQAL LED
AS lighting 2018 IMPRIMEUR 160417.indd 64 16/04/2017 11:59
65 extract 2018
MICRO & MINI TIQAL LED
3235 MICRO TIQAL LED Design Atelier Sedap
3235_95
0,5 KG
1 spot LED IP40 (blanc) - P. 6 W / 500mA / 390 lm / 3 000 °K / IRC > 80 - Hauteur d’encastrement hors-tout : 153 mm
RÉFÉRENCE SOURCES Alimentation non fournie
3245 MICRO TIQAL MR11 Design Atelier Sedap
3245_75
0,5 KG
1 spot MR16 IP44 (blanc ou noir) - P. maxi 35 W / GXU4 - Hauteur d’encastrement hors-tout : 91 mm
RÉFÉRENCE SOURCES
3245_95 1 spot LED IP40 (blanc ou noir) - P. 6 W / 500mA / 390 lm / 3 000 °K / IRC > 80 - Hauteur d’encastrement hors-tout : 132 mm
Ampoule et alimentation non fournies
3246 MICRO TIQAL MR11 ORIENTABLE Design Atelier Sedap
1,0 KGRÉFÉRENCE SOURCES Ampoule et alimentation non fournies
3241 MINI TIQAL ORIENTABLE Design Atelier Sedap
3241_65
1,0 KG
1 spot MR16 IP20 (blanc ou noir) - GU5.3 - Hauteur d’encastrement hors-tout : 96 mm
RÉFÉRENCE SOURCES
3241_75 1 spot GU10 IP20 (blanc ou noir) - Hauteur d’encastrement hors-tout : 116 mm3241_95 1 spot LED IP20 (blanc ou noir) - P. 11,2W / 350mA / 1175 lm / 3 000 °K / IRC > 85 - Hauteur d’encastrement hors-tout : 120 mm
Ampoule et alimentation non fournies
3241 / MINI TIQAL ORIENTABLE
110
86
110
13
ø30
ø40110
110
4013
160
160
ø60
4313
160
160
ø80
4613
3246_65 1 spot MR16 IP20 (blanc) - P. maxi 35 W / GXU4 - Hauteur d’encastrement hors-tout : 85 mm3246_95 1 spot LED IP20 (blanc) - P. 11,2 W / 350mA / 1175 lm / 3 000 °K / IRC > 85 - Hauteur d’encastrement hors-tout : 120 mm
AS lighting 2018 IMPRIMEUR 160417.indd 65 16/04/2017 12:00
66 extract 2018
SPOTENCASTRÉCOMPACT DESIGN
ATELIER SEDAP
3229 / ENCASTRÉ SIMPLE 3230 / ENCASTRÉ DOUBLE
Collection de spots en plâtre haute dureté pour équipement MR16, GU10 ou LED COB.Collection of high-strength plaster downlights for MR16, GU10 or LED COB equipments.
SPOTS ENCASTRÉS COMPACTS
SOURCES
3229 & 3230 SPOTS ENCSATRÉS COMPACTS Design Atelier Sedap
RÉFÉRENCE
69
315
460
145
3230 / ENCASTRÉ DOUBLE
Hauteur d’encastrement hors-tout : 165 mm
3229_05 1 spot orientable MR16 (blanc ou noir inclus) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3229_07 1 spot orientable GU10 (blanc ou noir inclus) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)3229_06 1 spot fixe LED COB IP65 (blanc inclus) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
3230_05 2 spots orientables MR16 (blanc ou noir inclus) - P. maxi 2 x 50 W / GX5.3 - (Ampoules et alimentation non fournies)3230_07 2 spots orientables GU10 (blanc ou noir inclus) - P. maxi 2 X 50 W / GU10 / 230V - (Ampoules non fournies)3230_06 2 spots fixes LED COB IP65 (blanc inclus) - P. maxi 2 x 9 W / 200mA / 2 x 650 lm / 55° / IRC > 80 - (Alimentation incluse)
315
315
70
69
AS lighting 2018 IMPRIMEUR 160417.indd 66 16/04/2017 12:00
67 extract 2018
Gamme de plafonniers semi-encastrés en plâtre HD, pour installation collée en recouvrement (sans raccorde-ment joint plâtre).Range of high-strength plaster lighting fixtures, for a semi-recessed mounting (with acrylic glue-withoutplaster jointing).
DAG
3125 / DAG ELLIPSE
DESIGN
ATELIER SEDAPDAG
290
175
135
ø265
70
ø265
3124 / DAG ROND
3124 DAG ROND Design Atelier Sedap
3124_05
1,5 KG
1 spot orientable MR16 (blanc) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)
RÉFÉRENCE SOURCES
Semi-encastré / Semi-recessed mounting
Hauteur d’encastrement hors-tout : 160 mm
3125 DAG ELLIPSE Design Atelier Sedap
3125_05
1,5 KG
1 spot orientable MR16 (blanc) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)
RÉFÉRENCE SOURCES
Semi-encastré / Semi-recessed mounting
3124_07 1 spot orientable GU10 (blanc) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
Hauteur d’encastrement hors-tout : 200 mm
3125_07 1 spot orientable GU10 (blanc) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
AS lighting 2018 IMPRIMEUR 160417.indd 67 16/04/2017 12:19
68 extract 2018
3206 / TROCADÉRO ROND
DESIGN
Fabrice BERRUX
Encastrés en plâtre HDpour équipement MR16,GU10 ou LED COB.Gamme spécialementadaptée aux plafonds.
High strength plasterrecessed fittings, withMR16,GU10 or LED COBequipments, especiallydesigned for ceilings.
3207 / TROCADÉRO DOUBLE
TROCADÉRO
3206 TROCADÉRO ROND Design Fabrice Berrux
RÉFÉRENCE SOURCES
3207 TROCADÉRO DOUBLE Design Fabrice Berrux
RÉFÉRENCE SOURCES
1,5 KGHauteur d’encastrement hors-tout : 165 mm
2,5 KGHauteur d’encastrement hors-tout : 165 mm
3206_05 1 spot orientable MR16 (blanc) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3206_07 1 spot orientable GU10 (blanc) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)3206_06 1 spot fixe LED COB IP65 (blanc) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
3207_05 2 spots orientables MR16 (blanc) - P. maxi 2 x 50 W / GX5.3 - (Ampoules et alimentation non fournies)3207_07 2 spots orientables GU10 (blanc) - P. maxi 2 X 50 W / GU10 / 230V - (Ampoules non fournies)3207_06 2 spots fixes LED COB IP65 (blanc) - P. maxi 2 x 9 W / 200mA / 2 x 650 lm / 55° / IRC > 80 - (Alimentation incluse)
340
340
ø122
200110
340
460
ø122
200110
AS lighting 2018 IMPRIMEUR 160417.indd 68 16/04/2017 12:19
69 extract 2018
3205 / ANTIQAL DOUBLE
3204 / ANTIQAL ROND
DESIGN
Auguste AJARANTIQAL
Encastrés en plâtre HDpour équipement MR16,GU10 ou LED COB.Gamme spécialementadaptée aux plafonds.
High strength plasterrecessed fittings, withMR16, GU10 or LED COBequipments, especiallydesigned for ceilings.
TROCADÉRO & ANTIQAL
3204 ANTIQAL ROND Design Auguste Ajar
RÉFÉRENCE SOURCES
3205 ANTIQAL DOUBLE Design Auguste Ajar
RÉFÉRENCE SOURCES
1,5 KGHauteur d’encastrement hors-tout : 165 mm
2,5 KGHauteur d’encastrement hors-tout : 165 mm
3204_05 1 spot orientable MR16 (blanc) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3204_07 1 spot orientable GU10 (blanc) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)3204_06 1 spot fixe LED COB IP65 (blanc) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
3205_05 2 spots orientables MR16 (blanc) - P. maxi 2 x 50 W / GX5.3 - (Ampoules et alimentation non fournies)3205_07 2 spots orientables GU10 (blanc) - P. maxi 2 X 50 W / GU10 / 230V - (Ampoules non fournies)3205_06 2 spots fixes LED COB IP65 (blanc) - P. maxi 2 x 9 W / 200mA / 2 x 650 lm / 55° / IRC > 80 - (Alimentation incluse)
306
306
122
100
306
435
122
100
AS lighting 2018 IMPRIMEUR 160417.indd 69 16/04/2017 12:19
70 extract 2018
3067 / TIQAL DOUBLE
Encastrés en plâtre HD pour équipement MR16, GU10 ou LED COB.Gamme spécialement adaptée aux plafonds.High strength plaster recessed fittings, with MR16, GU10 or LED COB equipments, especially designed forceilings.
TIQAL
3043 / TIQAL CARRÉ 3065 / TIQAL ROND 3066 / TIQAL 30° 3067 / TIQAL DOUBLE
DESIGN
ATELIER SEDAPTIQAL
AS lighting 2018 IMPRIMEUR 160417.indd 70 16/04/2017 12:20
71 extract 2018
TIQAL
250
210
60°
65 int.
142
210
330
110
65 int.
65 int.
210
210
110
210
210
6.5 int.
110
3043 TIQAL CARRÉ Design Atelier Sedap
3043_05
1,5 KG
1 spot orientable MR16 (blanc ou noir inclus) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)
RÉFÉRENCE SOURCES
3043_07 1 spot orientable GU10 (blanc ou noir inclus) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)3043_06 1 spot fixe LED COB IP65 (blanc inclus) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
Hauteur d’encastrement hors-tout : 165 mm
3065 TIQAL ROND Design Atelier Sedap
3065_05
1,5 KG
1 spot orientable MR16 (blanc ou noir inclus) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)
RÉFÉRENCE SOURCES
3065_07 1 spot orientable GU10 (blanc ou noir inclus) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)3065_06 1 spot fixe LED COB IP65 (blanc inclus) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
Hauteur d’encastrement hors-tout : 165 mm
3066 TIQAL 30° Design Atelier Sedap
3066_05
1,5 KG
1 spot orientable MR16 (blanc ou noir inclus) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)
RÉFÉRENCE SOURCES
3066_07 1 spot orientable GU10 (blanc ou noir inclus) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
Hauteur d’encastrement hors-tout : 190 mm
3067 TIQAL DOUBLE Design Atelier Sedap
3067_05
1,5 KG
2 spots orientables MR16 (blanc ou noir inclus) - P. maxi 2 x 50 W / GX5.3 - (Ampoules et alimentation non fournies)
RÉFÉRENCE SOURCES
3067_07 2 spots orientables GU10 (blanc ou noir inclus) - P. maxi 2 x 50 W / GU10 / 230V - (Ampoules non fournies)
Hauteur d’encastrement hors-tout : 165 mm
AS lighting 2018 IMPRIMEUR 160417.indd 71 16/04/2017 12:20
72 extract 2018
3060 / HAUSSMANN
3062 / DIAMANT3060 / HAUSSMANN 3061 / STAR
Encastrés en plâtre HD pour équipement MR16, GU10 ou LED COB.Gamme spécialement adaptée aux plafonds.High strength plaster recessed fittings, with MR16, GU10 or LED COB equipments, especiallydesigned for ceilings.
HAUSSMANN, STAR & DIAMANT
HAUSSMANN,STAR &DIAMANT
DESIGN
ATELIER SEDAP
AS lighting 2018 IMPRIMEUR 160417.indd 72 16/04/2017 12:20
73 extract 2018
3061 / STAR 3062 / DIAMANT
HAUSSMANN, STAR & DIAMANT
380
440
88
3060 HAUSSMANN Design Atelier Sedap
1,5 KGRÉFÉRENCE SOURCES Hauteur d’encastrement hors-tout : 160 mm
3061 STAR Design Atelier Sedap
1,5 KGRÉFÉRENCE SOURCES
3062 DIAMANT Design Atelier Sedap
1,5 KGRÉFÉRENCE SOURCES
280
280
93
195
240
65
240
183
3060_05 1 spot orientable MR16 (blanc ou noir) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3060_07 1 spot orientable GU10 (blanc ou noir) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)3060_06 1 spot fixe LED COB IP65 (blanc) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
Hauteur d’encastrement hors-tout : 180 mm
Hauteur d’encastrement hors-tout : 185 mm
3061_05 1 spot orientable MR16 (blanc ou noir) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3061_07 1 spot orientable GU10 (blanc ou noir) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)3061_06 1 spot fixe LED COB IP65 (blanc) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
3061_05 1 spot orientable MR16 (blanc ou noir) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3061_07 1 spot orientable GU10 (blanc ou noir) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)3061_06 1 spot fixe LED COB IP65 (blanc) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
AS lighting 2018 IMPRIMEUR 160417.indd 73 16/04/2017 12:20
74 extract 2018
3073 / IPL TBT 12-3 3071 / IPL TBT 12-1 - 3072 / IPL TBT 12-2
Encastrés en plâtre HD pour sources MR16 (dichroïque halogène ou LED). Gamme spécialement adaptée aux plafonds.High strength plaster recessed fittings, with MR16 equipment (dichroic halogen or LED), especially designedfor ceilings.
IPL TBT 12
3073 / IPL TBT 12-33071 / IPL TBT 12-1 3072 / IPL TBT 12-2
AS lighting 2018 IMPRIMEUR 160417.indd 74 16/04/2017 12:20
75 extract 2018
IPL 12
220
420
120 int.
60 int.
320 int.
220
340
120 int.
60 int.
240 int.
220
220
120 int.
60 int.
120 int.
Plus d’informations et photométrie sur sedap.com / More data and photometry available at sedap.com
3071 IPL TBT 12-1 Design Atelier Sedap
2,0 KGRÉFÉRENCE SOURCES Hauteur d’encastrement hors-tout : 160 mm
3072 IPL TBT 12-2 Design Atelier Sedap
3,0 KGRÉFÉRENCE SOURCES Hauteur d’encastrement hors-tout : 160 mm
3073 IPL TBT 12-3 Design Atelier Sedap
3,7 KGRÉFÉRENCE SOURCES Hauteur d’encastrement hors-tout : 160 mm
3071_05 1 spot orientable MR16 (blanc ou noir) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3071_07 1 spot orientable GU10 (blanc ou noir) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)3071_06 1 spot fixe LED COB IP65 (blanc) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
3072_05 2 spots orientables MR16 (blanc ou noir) - P. maxi 2 x 50 W / GX5.3 - (Ampoules et alimentation non fournies)3072_07 2 spots orientables GU10 (blanc ou noir) - P. maxi 2 x 50 W / GU10 / 230V - (Ampoules non fournies)3072_06 2 spots fixes LED COB IP65 (blanc) - P. maxi 2 x 9 W / 200mA / 1 300 lm / 55° / IRC > 80 - (Alimentation incluse)
3073_05 3 spots orientables MR16 (blanc ou noir) - P. maxi 3 x 50 W / GX5.3 - (Ampoules et alimentation non fournies)3073_07 3 spots orientables GU10 (blanc ou noir) - P. maxi 3 x 50 W / GU10 / 230V - (Ampoules non fournies)3073_06 3 spots fixes LED COB IP65 (blanc) - P. maxi 3 x 9 W / 200mA / 1 950 lm / 55° / IRC > 80 - (Alimentation incluse)
AS lighting 2018 IMPRIMEUR 160417.indd 75 16/04/2017 12:20
76 extract 2018
Trappes techniques en plâtre HD pour encastrement plafond. Passe cable permettant un accès facile aux alimenta-tions .Recessed technical hatch for ceilings. Cable gland for easy access to power supplies.
TRAPPES TECHNIQUES
3117 / TRAPPE TECHNIQUE
AS lighting 2018 IMPRIMEUR 160417.indd 76 16/04/2017 12:20
77 extract 2018
TRAPPES TECHNIQUES
3114 / TRAPPE TECHNIQUE
3114 3115
3116 3117
3114 / TRAPPE TECHNIQUE
200 x 200 MM 1,0 KG
DIMENSIONS POIDSDÉSIGNATION
3114, 3115, 3116 & 3117 TRAPPES TECHNIQUES Design Atelier Sedap
3114 Trappe technique
RÉFÉRENCE
200 x 200 MM 1,0 KG3115 Trappe technique200 x 200 MM 1,0 KG3116 Trappe technique200 x 200 MM 1,0 KG3117 Trappe technique
200
200
6.5 int.
3114 3115
3116 3117
ø120
AS lighting 2018 IMPRIMEUR 160417.indd 77 16/04/2017 12:21
78 extract 2018
QUADRAT DESIGNATELIER SEDAP
QUADRATGamme d’encastrés de mur en plâtre HD spécialement adapté aux cloisons sèches.Equipement LED HP 230V - 3000°K. Driver extractible (fixation magnétique).High-strength plaster fittings especially designed to be recessed in plasterboard walls.High power LED equipment – Power supply 230V - 3000°K. Extractable driver (magnets).
3225 / QUADRAT 15
AS lighting 2018 IMPRIMEUR 160417.indd 78 16/04/2017 12:21
79 extract 2018
QUADRAT
3225 / QUADRAT 153224 / QUADRAT 10
150100
3224 & 3225 QUADRAT 10 & 15 Design Atelier Sedap
3224_06
1,0 KG
3 000 °K / 3,2 W / 230V / 440 lm / 350mA / IRC > 80 - Equipement non dimmable / Non dimmable equipment
RÉFÉRENCE SOURCES
3225_06 3 000 °K / 6,2 W / 230V / 750 lm / 350mA / IRC > 80 - Equipement non dimmable / Non dimmable equipment
LEDs et alimentation extractible incluses / LEDs and extractable power supply included
Option dimmable : 1-10V ou Push Dim
3224 / QUADRAT 10 3225 / QUADRAT 15
90
90
150
150
3224 / QUADRAT 10 3225 / QUADRAT 15
255305150
100
56 56
255
175
305
242
AS lighting 2018 IMPRIMEUR 160417.indd 79 16/04/2017 12:21
80 extract 2018
SLIM SLOT XL
DESIGN
ATELIER SEDAP
SLIM SLOT XLEncastrés en plâtre HD pour 2 LEDs high power. Slim Slot XL est une gamme d’épaisseur 50 mm spécialementadaptée aux cloisons en plaque de plâtre.High strength plaster recessed fittings, equiped with 2 high power 350mA LEDs, especially designed forplasterboard walls (50 mm deep).
3200 3201 3202 3203 / SLIM SLOT XL
AS lighting 2018 IMPRIMEUR 160417.indd 80 16/04/2017 12:21
81 extract 2018
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (350-500mA)0110300097
SLIM SLOT XL
3201/SLIM SLOT XL
3203/SLIM SLOT XL 3201, 3200, 3202 & 3203
3200 3201 3202 3203
25
30
0
160
390
160
278
25
20
0
55160
160
25
45730
0
25
20
0
360
3200, 3201, 3202, 3203 & 3226 SLIM SLOT XL Design Atelier Sedap
3200_WW3 2 KG2 700 °K / 2 LEDs highbrightness / 350mA / 2 W / 184 lm ou 500mA / 3 W / 302 lm
RÉFÉRENCE SOURCES
3201_WW3 2 700 °K / 2 LEDs highbrightness / 350mA / 2 W / 184 lm ou 500mA / 3 W / 302 lm3202_WW3 2 700 °K / 2 LEDs highbrightness / 350mA / 2 W / 184 lm ou 500mA / 3 W / 302 lm
2 KG
3203_WW3 2 700 °K / 2 LEDs highbrightness / 350mA / 2 W / 184 lm ou 500mA / 3 W / 302 lm3226_WW3 2 700 °K / 2 LEDs highbrightness / 350mA / 2 W / 184 lm ou 500mA / 3 W / 302 lm
Alimentation LED non-dimmable multi-amp (350-500mA)0110300103
POIDS
3226/SLOT XL ELLIPSE
2 KG
2 KG
1 KG
40
190
160
360
3226
3202/SLIM SLOT XL
AS lighting 2018 IMPRIMEUR 160417.indd 81 16/04/2017 12:21
82 extract 2018
Encastrés en plâtre HD pour 2 LEDs high power. Slot est une gamme d’épaisseur 50 mmspécialement adaptée aux cloisons en plaque de plâtre.High strength plaster recessed fittings, equiped with 2 high power 350mA LED, especiallydesigned for plasterboard walls (50 mm deep).
SLOT XL
3030 / SLOT XL2
3041/SLOT XL4 3042/SLOT XL53029/SLOT XL33030/SLOT XL23031/SLOT XL1
3030 / SLOT XL3 3030 / SLOT XL3
AS lighting 2018 IMPRIMEUR 160417.indd 82 16/04/2017 12:21
83 extract 2018
3139 / SLOT DOUBLE
50
560 400
160
60
50
780 600
160
60
160
410 250
6050
160
330 170
6050
160
245 85
6050
Plus d’informations et photométrie sur sedap.com / More data and photometry available at sedap.com
SLOT XL
3031 SLOT XL1 Design Atelier Sedap
3031_WW3
1,0 KG
2 700 °K / 2 LEDs highbrightness / 350mA/2 W/184 lm ou 500mA/3 W/302 lm / Circuit / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (350-500mA)0110300097Alimentation LED non-dimmable multi-amp (350-500mA)0110300103
3030 SLOT XL2 Design Atelier Sedap
3030_WW3
1,6 KG
2 700 °K / 2 LEDs highbrightness / 350mA/2 W/184 lm ou 500mA/3 W/302 lm / Circuit / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (350-500mA)0110300097Alimentation LED non-dimmable multi-amp (350-500mA)0110300103
3029 SLOT XL3 Design Atelier Sedap
3029_WW3
2,0 KG
2 700 °K / 2 LEDs highbrightness / 350mA/2 W/184 lm ou 500mA/3 W/302 lm / Circuit / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (350-500mA)0110300097Alimentation LED non-dimmable multi-amp (350-500mA)0110300103
3041 SLOT XL4 Design Atelier Sedap
3041_WW3
2,0 KG
2 700 °K / 2 LEDs highbrightness / 350mA/2 W/184 lm ou 500mA/3 W/302 lm / Circuit / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (350-500mA)0110300097Alimentation LED non-dimmable multi-amp (350-500mA)0110300103
3042 SLOT XL5 Design Atelier Sedap
3042_WW3
3,3 KG
2 700 °K / 2 LEDs highbrightness / 350mA/2 W/184 lm ou 500mA/3 W/302 lm / Circuit / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (350-500mA)0110300097Alimentation LED non-dimmable multi-amp (350-500mA)0110300103
3139 SLOT DOUBLE Design Atelier Sedap
3139_WW3
3,0 KG
2 700 °K / 2 x 2 LEDs highbrightness / 350mA/4 W/440 lm / Circuit / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (350-500mA)0110300097Alimentation LED non-dimmable multi-amp (350-500mA)0110300103
50235
60
250410
AS lighting 2018 IMPRIMEUR 160417.indd 83 16/04/2017 12:21
84 extract 2018
1966 / SLOT1965 / SPHÈRE 1967 / SQUARE1961 / EGG 1962 / FLAM
1961 / EGG
Encastrés en plâtre HD pour équipement LEDs 12V.Gamme d’épaisseur 50 mm spécialement adaptée aux cloisons en plaque de plâtre.High strength plaster recessed fittings, equiped with 12V LEDs, especially designed for plasterboard walls(50 mm deep).
EGG, FLAM, SPHÈRE, SLOT & SQUARE
DESIGN
ATELIER SEDAPEGG
AS lighting 2018 IMPRIMEUR 160417.indd 84 16/04/2017 12:21
85 extract 2018
1966 / SLOT
EGG, FLAM, SPHÈRE, SLOT & SQUARE
50
140
260
100
100
140
160
40
320
50
160
270
ø120
50
140
375 245
5040
155
270
80
150
50
Plus d’informations et photométrie sur sedap.com / More data and photometry available at sedap.com
Alimentation LED dimmable 1-10V ou Push Dim multi-amp0110300097
1961 EGG Design Atelier Sedap
1961_14
0,8 KG
2 700 °K / 8 LEDs highbrightness / maxi 1,2 W / 12V / 100 lm / Circuit inclus / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp0110300097
1962 FLAM Design Atelier Sedap
1962_14
0,8 KG
2 700 °K / 8 LEDs highbrightness / maxi 1,2 W / 12V / 100 lm / Circuit inclus / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp0110300097
1965 SPHÈRE Design Atelier Sedap
1965_14
0,8 KG
2 700 °K / 8 LEDs highbrightness / maxi 1,2 W / 12V / 100 lm / Circuit inclus / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp0110300097
1966 SLOT Design Atelier Sedap
1966_14
0,8 KG
2 700 °K / 8 LEDs highbrightness / maxi 1,2 W / 12V / 100 lm / Circuit inclus / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp0110300097
1967 SQUARE Design Atelier Sedap
1967_14
0,8 KG
2 700 °K / 8 LEDs highbrightness / maxi 1,2 W / 12V / 100 lm / Circuit inclus / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
1966 / SLOT
AS lighting 2018 IMPRIMEUR 160417.indd 85 16/04/2017 12:21
86 extract 2018
1663 / RECTANGLE
1660/PETIT ROND 1662/GRAND ROND 1663/RECTANGLE1666/CARRÉ
Encastrés en plâtre HD et diffusant PMMA satiné (77%) pour sources LED.Gamme d’épaisseur 56 mm spécialement adaptée aux cloisons en plaque de plâtre.High strength plaster and satin PMMA diffusor (77%) recessed fittings, with LEDlighting, especially designed for plasterboard walls (56 mm deep).
ROND, CARRÉ & RECTANGLE
DESIGN
ATELIER SEDAP
RONDCARRÉ
RECTANGLE
AS lighting 2018 IMPRIMEUR 160417.indd 86 16/04/2017 12:21
87 extract 2018
1666 / CARRÉ
1662 / GRAND ROND
ROND, CARRÉ & RECTANGLE
230
100
140 55
210 55
330
150
186 55
382
50
312
270 55
370
20
0
200
Plus d’informations et photométrie sur sedap.com / More data and photometry available at sedap.com
1660 PETIT ROND Design Atelier Sedap
1660_24
1,5 KG
3 000 °K / 7,5 W / 930 lm / 350mA / Equipement non dimmable / Non dimmable equipment
RÉFÉRENCE SOURCES
1660_26 3 000 °K / 7,5 W / 930 lm / 350mA / Equipement dimmable 1-10V ou Push Dim / Dimmable equipment
LEDs et alimentation incluses / LEDs and power supply included
Option dimmable DALI
1662 GRAND ROND Design Atelier Sedap
1662_24
1,5 KG
3 000 °K / 12 W / 1 300 lm / 350mA ou 17 W / 1 750 lm / 500mA / Driver multiwatt
RÉFÉRENCE SOURCES
1662_26 3 000 °K / 12 W / 1 300 lm / 350mA ou 17 W / 1 750 lm / 500mA / Driver multiwatt gradable (1-10V, Push Dim ou DALI)
LEDs et alimentation incluses / LEDs and power supply included
1663 RECTANGLE Design Atelier Sedap
1663_24
3 KG
3 000 °K / 8 W / 1 280 lm / 350mA / Driver standard
RÉFÉRENCE SOURCES
1663_26 3 000 °K / 8 W / 1 280 lm / 350mA / Driver gradable (DSI, DALI ou Push Dim)
LEDs et alimentation incluses / LEDs and power supply included
1666 CARRÉ Design Atelier Sedap
1666_24
3,5 KG
3 000 °K / 10,3 W / 1 300 lm / 350mA ou 15,3 W / 1 750 lm / 500mA / Driver multiwatt
RÉFÉRENCE SOURCES
1666_26 3 000 °K / 10,3 W / 1 300 lm / 350mA ou 15,3 W / 1 750 lm / 500mA / Driver multiwatt gradable (1-10V, Push Dim ou DALI)
LEDs et alimentation incluses / LEDs and power supply included
AS lighting 2018 IMPRIMEUR 160417.indd 87 16/04/2017 12:22
88 extract 2018
SLIM LINE
DESIGN
ATELIER SEDAP
SLIM LINEEncastrés mur et plafond en plâtre HD pour Flex LEDs high power. Slim Line est une gamme d’épaisseur 60 mmspécialement adaptée aux cloisons en plaque de plâtre.High strength plaster recessed fittings, equiped with high power 350mA Flex LEDs, especially designed forplasterboard walls and ceilings (60 mm deep).
789 / SLIM LINE
AS lighting 2018 IMPRIMEUR 160417.indd 88 16/04/2017 12:22
89 extract 2018
SLIM LINE
25
580
1005
1080
505
2525
100
60
LONGUEUR
Alimentation 24V 30 W / Power supply 24V 30 W (160 x 46 x 30 mm)Alimentation 24V 100 W / Power supply 24V 100 W (200 x 67 x 34 mm)
01103000620110300050
1,08 M0,58 M
788 & 789 SLIM LINE Design Atelier Sedap
788 HP LEDs 9,6 W / 24V - 1 000 lm - Diffuseur inclus / Diffuser included
RÉFÉRENCE SOURCES
789 HP LEDs 19,2 W / 24V - 2 000 lm - Diffuseur inclus / Diffuser included
Sans alimentation / Power supply not included
788 / SLIM LINE 788 789 / SLIM LINE
788 / SLIM LINE
789 / SLIM LINE
AS lighting 2018 IMPRIMEUR 160417.indd 89 16/04/2017 12:22
90
SYSTÈME BLADE
1. 2. 3. 4.
5. 6. 7. 8.
9. 10.
SYSTÈME MICRO BLADE
1. 2. 3. 4.
6. 7. 8.
9. 10. 11. 12.
NOTICES DE POSE
Notices de pose détaillées disponibles sur www.sedap.com / Detailed mounting instructions downloadable on www.sedap.com
AS lighting 2018 IMPRIMEUR 160417.indd 90 16/04/2017 12:22
91 extract 2018
ENCASTRÉS
1. 2. 3. 4.
5. 6. 7.
NOTICE DE POSE
SEMI-ENCASTRÉS
1. 2. 3. 4. 5.
Notices de pose détaillées disponibles sur www.sedap.com / Detailed mounting instructions downloadable on www.sedap.com
AS lighting 2018 IMPRIMEUR 160417.indd 91 16/04/2017 12:22
92 extract 2018
APPLIQUES LED extract
1445 LED COB 18,4 W - 230V - 2680 lm
1523 LED COB 36,8 W - 230V - 5720 lm
3215 FALDA LED COB 18,4 W - 230V - 2860 lm
3238 BALI LED COB 36,8 W - 230V - 5720 lm1710 MOUCHARABIEH LED COB 36,8 W - 230V
5720 lm
AS lighting 2018 IMPRIMEUR 160417.indd 92 16/04/2017 12:23
93 extract 2018
APPLIQUE LED extract
Découvrez la gamme complète sur sedap.com / Discover the complete LED range on sedap.com
3055 SAQQARA LED COB 22,5 W - 230V2790 lm 1932 EDGE LED COB 22,5 W - 230V - 2790 lm
3078 AGRAFE LED COB 19,2 W - 230V - 2700 lm 3077 ANGLE LED COB 8 W - 230V - 1430 lm
3141 TROCADÉRO 60 LED COB 36,8 W - 230V5720 lm
3140 TROCADÉRO 30 LED COB 18,4 W - 230V2860 lm
AS lighting 2018 IMPRIMEUR 160417.indd 93 16/04/2017 12:23
94 extract 2018
SUSPENSIONS & PLAFONNIERS extract
1983 LED COB 29,2 W - 230V - 3750 lm
1572 EVOLUTION LED COB 73,6 W - 230V - 11440 lm1571 ELLIPSE LED COB 73,6 W - 230V
11440 lm
1982 LED COB 29,2 W - 230V - 3750 lm
3171 ANNEAUX 88,4 W - 230V - 8500 lm3159 TROCADÉRO LED COB - 230V - 3750 lm
AS lighting 2018 IMPRIMEUR 160417.indd 94 16/04/2017 12:23
95 extract 2018
SUSPENSIONS & PLAFONNIERS extract
Découvrez la gamme complète sur sedap.com / Discover the complete LED range on sedap.com
3180 ANNEAU 80 70 W - 230V - 6750 lm
1570 LED COB 73,6 W - 230V - 11440 lm
3237 LED COB 30 W - 230V - 3750 lm RUCHE LED COB 13,8 W - 230V - 1790 lm
1824 HALO LED COB 32,5 W - 230V - 4350 lm
AS lighting 2018 IMPRIMEUR 160417.indd 95 16/04/2017 14:23
96 extract 2018
Atelier Seda
p se
rés
erve
le
droi
t d’
appo
rter
tou
tes
modi
fica
tion
s au
x pr
odui
ts p
rése
ntés
dan
s ce
cat
alog
ue.
Phot
os n
on c
ontr
actu
elle
s.©
Copy
righ
t. T
ous
droi
ts r
éser
vés.
Atel
ier Sedap is entitled to modify the products shows in this catalogue.
Phot
os and colours may vary to the actual item.
© Co
pyright. All rights reserved.
Pages 16-40-41 Maison en Gironde - Bassam El Okeily ArchitectePage 16 Conservatoire de Puteaux - Ville de Puteaux - Brossy & associés
INDEX
Pages 14-15-30 Fitness First - London - Optelma LightingPage 07 Crêche «les petits soleils» - Tournai - «La Technique»
Page 20-39-82 Vicarage Gate - London - Syntax LightingPage 21 GYRON - London - Optelma LightingPage 21 Théâtre de la Madeleine - Paris - Patrick Folacci
Page 17 Maison - Pays-Bas - George Van Luit Architecte
Page 29 Tour Mercure - TourcoingPage 27 Agence Bourdon-Cholet
Page 38 Cabinet dentaire - Nantes - BoucaultPage 44 Cabinet médical - Paris - TortigerPage 54 Théâtre Saint-Georges - Paris - Patrick Folacci
Page 32 Résidence privée - Moscou - Skol
772R MICRO BLADE 50 POSE RAIL
773 MICRO BLADE 50 TURN
779 MICRO BLADE CADRE
27
28
756 MICRO BLADE CURTAIN 2 35
761 MICRO BLADE CURTAIN 1 35
33
782 U BLADE 135 49124 STYLE LOUIS XV
125
126 STYLE LOUIS XV
56
57
57 788 SLIM LINE
789 SLIM LINE
790 COUPOLE 42
791 COUPOLE 42 STYLE
792 COUPOLE 75
793 COUPOLE 75 STYLE
794 COUPOLE 100
738 MICRO X BLADE 35 51
786 V BLADE 170 47
780 U BLADE 120 47
89
89
6
11
7
11
7
127 STYLE CLASSIQUE
133 STYLE LOUIS XV
187 CALE
189 LIGNE
190 DOUCINE
191 CORNICHES
192 CORNICHES
193 CORNICHES
194 CORNICHES
197 CORNICHES
198 CORNICHES
195 CORNICHES
57
57
53
53
53
55
55
55
55
54
54
55
199 CORNICHES
730 MICRO BLADE 25
734 ECO BLADE CORNICHE
737 MICRO BLADE PLINTHE
740 BLADE
758 MICRO BLADE CIRCLE 42
759 MICRO BLADE CIRCLE 75
760 MINI BLADE
767 MICRO BLADE CIRCLE 100
769 MICRO BLADE CIRCLE 200
770 MICRO BLADE 35
768 MICRO BLADE CIRCLE 150
771 MICRO BLADE 63
54
25
37
32
45
16
16
41
16
17
31
17
31
1663 RECTANGLE
1666
1967 SQUARE
3029 SLOT XL3
SLOT XL2
87
87
85
83
83
3071 IPL TBT 12-1
3072 IPL TBT 12-2
3073 IPL TBT 12-3
75
75
75
3031 SLOT XL1 83
1966 SLOT
3067 TIQAL DOUBLE
85
71
3061 STAR
3062 DIAMANT
3042 SLOT XL5
3043 TIQAL CARRÉ
3065 TIQAL ROND
3060 HAUSSMANN
3114 TRAPPES TECHNIQUES
73
73
83
71
71
73
77
795 COUPOLE 100 STYLE
796 COUPOLE 150
797 COUPOLE ORIGAMI
799 COUPOLE GOUTTE 42
840 X BLADE
860 MINI X BLADE
900 COUPOLE RIVOLI
870 MICRO X BLADE
1660 PETIT ROND
1662 GRAND ROND
13
7
9
9
50
51
13
51
87
87
1961 EGG 85
1962 FLAM 85
1965 SPHÈRE 85
772 MICRO BLADE 50 27
775 MICRO BLADE ANGLE 34
188 AILE 53
3041 SLOT XL4 83
3116 TRAPPES TECHNIQUES
3117 TRAPPES TECHNIQUES
3124 DAG ROND
77
77
67
3115 TRAPPES TECHNIQUES 77
3125 DAG ELLIPSE 67
3139 SLOT DOUBLE 83
3200 SLIM SLOT XL 81
3201 SLIM SLOT XL 81
3202 SLIM SLOT XL 81
3203 SLIM SLOT XL 81
3204 ANTIQAL ROND 69
3205 ANTIQAL DOUBLE 69
3206 TROCADÉRO ROND 68
3207 TROCADÉRO DOUBLE 68
3224 QUADRAT 79
3225 QUADRAT 79
3229 SPOTS ENCASTRÉS COMPACTS 66
3230 SPOTS ENCASTRÉS COMP 66
3231 MINI TIQAL 1 SPOT 63
3232 MINI TIQAL 2 SPOTS 63
3233 MINI TIQAL 3 SPOTS 63
3234 MINI TIQAL 3 SPOTS 63
3235 MICRO TIQAL LED 65
3241
MICRO TIQAL MR11
65
3245
MICRO TIQAL MR11 ORIENTABLE
65
3246
MINI TIQAL ORIENTABLE
65
3256 MINISTAR 61
STYLE EMPIRE
RÉFÉRENCE / NOM PAGE(S) RÉFÉRENCE / NOM PAGE(S) RÉFÉRENCE / NOM PAGE(S)
3030
733 ECO BLADE PLAN 37
3066 TIQAL 30° 71
CARRÉ
3226 SLIM SLOT XL 81
MICRO BLADE DOOBLE 507000 23
7002 MICRO BLADE DOOBLE 100 23
798 COUPOLE GOUTTE 75 9
764 MICRO BLADE CROSS 60/120 29
765 MICRO BLADE CROSS 90/90 29
731 MICRO BLADE 25 R2
732 MICRO BLADE 25 R4
25
25
7004 U BLADE 120X120 49
AS lighting 2018 IMPRIMEUR 160417.indd 96
extract 2018 extract 2018
sedap.com
Fabrice BERRUX / Benoît BOHUdirection artistique / art direction
Tous les modèles de la collection Atelier Sedap sont protégés par des droits d’auteur en raison de leur valeur artistique et de la nature créative et originale de leur conception. Des droits d’auteur officiels et légaux assurent une protection com-plète des créations d’Atelier Sedap pendant toute la vie du designer et au-delà. Atelier Sedap est fortement impliquée dans le combat contre des copies, en partenariat avec d’autres fabricants et des associations de protection de designers.All the models from the Atelier Sedap collection are protected by copyrights and patents, due to their artistic value and original creative nature. Official, legal copyrights and patents ensure a complete protection of the Atelier Sedap creations during all the life of the designer, and even longer. Atelier Sedap is highly involved in the fight against copies, in par-tnership with other manufacturers and design protection associations.
Atelier Sedap se réser
ve l
e dr
oit
d’ap
port
er t
oute
s mo
difi
cati
ons
aux
prod
uits
pré
sent
és d
ans
ce c
atal
ogue
.Ph
otos
non
con
trac
tuel
les.
© Co
pyri
ght.
Tou
s dr
oits
rés
ervé
s.
Atel
ier
Seda
p is entitled to modify the products shows in this catalogue.
Phot
os a
nd c
olours may vary to the actual item.
© Co
pyri
ght.
All rights reserved.
Fabrice BERRUX Yves BLAYO Alain BRUX
Didier CORNILLE Rémi FONTAINE Philippe GOURDON
Neil POULTONIrina PETRUK Michel TORTEL
Charlotte ARNAL
DESIGNERS
Julie FIGUEROAdesign graphique / graphic design
Arsenii LEONOVITCH
D 21
8 - 0
4/20
17
top related