7/28/2019 07 IO Modules

1/421PowerEdge M1000e Administration and Configuration 1

7/28/2019 07 IO Modules

2/422PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

3/42

7/28/2019 07 IO Modules

4/424PowerEdge M1000e Administration and Configuration

The following are included in the traffic interconnect components:

PowerConnect 6220M Ethernet switch

Cisco 3130 Ethernet

Brocade 4424 Fibre-channel switch

Dell Ethernet Pass-through module

Emulex PT-1016 Fibre-channel Pass-through module

Broadcom 5708S Ethernet controllers

Emulex M-LPe1105 Fibre-channel controller

QLogic QME 2472 Fibre-channel controller

Infiniband

7/28/2019 07 IO Modules

5/425PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

6/426PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

7/427PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

8/428PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

9/429PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

10/4210PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

11/4211PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

12/4212PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

13/4213PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

14/4214PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

15/4215PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

16/4216PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

17/4217PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

18/4218PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

19/4219PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

20/4220PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

21/4221PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

22/4222PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

23/4223PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

24/4224PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

25/4225PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

26/4226PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

27/4227PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

28/4228PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

29/42

7/28/2019 07 IO Modules

30/4230PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

31/4231PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

32/4232PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

33/4233PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

34/4234PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

35/4235PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

36/4236PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

37/4237PowerEdge M1000e Administration and Configuration

Modular systems, such as the Dell PowerEdge M1000e, provide a great

option to address availability requirements at the hardware level.

Modular systems have inherent capabilities for providing hot plugging

of modules without the need to bring down an entire chassis. Modules

in the chassis can be swapped with minimal impact to the overall datacenter environment. When modules are swapped, especially

networking (Ethernet) and storage (Fibre Channel) devices,

configuration for these devices on external switches and routers would

need to be updated and refreshed. Depending upon the network and

storage topologies these configuration changes may ripple through

multiple nodes. This would result in unavailability of network and

storage resources to the application. Downtime of the resources could

be significant enough to negatively impact application performance.

These performance impacts may not be acceptable for mission criticalapplications and in general it might not to be desirable to have any

downtime on network and storage resources due to changes in a

system configuration.

7/28/2019 07 IO Modules

38/4238PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

39/4239PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

40/4240PowerEdge M1000e Administration and Configuration

Once the FlexAddress feature has been enabled, users may choose to

leave the SD card plugged into the CMC for long term storage, or it

may be removed. Users should not alter data on the SD card in any

way as it may inhibit system function and cause it to malfunction.

Note: To enable FlexAddress, customers must purchase this SD card

(Dell Part #0J822F) at the time of original sale of the PowerEdge

M1000e chassis (if chosen the SD card will be installed from the

factory) or it can be purchased after original sale as a customer kit.

Caution: Customers cannot supply their own third party SD cards to

enable FlexAddress, as there is no way to transfer the FlexAddress

information to a third party SD card.

7/28/2019 07 IO Modules

41/4241PowerEdge M1000e Administration and Configuration

7/28/2019 07 IO Modules

42/42