tecumseh’s 1655 full variable speed centrifuge · 2016-01-15 · tecumseh industries ltd. 604 –...
TRANSCRIPT
________________________________________________________________________
Tecumseh Industries Ltd. www.tecumsehcentrifuges.ca 604 – 21st Street SE, High River, Alberta T1V 2A6 � Telephone: (403) 601-2424 � Facsimile: (403) 601-2473
Tecumseh’s 1655 Full Variable Speed Centrifuge
(Model Tec-1655-FVS)
Tecumseh Industries Ltd. would like to introduce our Tec-1655-FVS centrifuge.
This centrifuge was developed to provide customers with a Full Variable Speed centrifuge
suitable for applications where a small footprint is required due to limited space. The Tec-1655-
FVS centrifuge is a significantly shorter than our “direct drive” conveyor drive or, HD models.
With real-time full variable speed adjustment capability of all operating parameters, operators
have the ability to fine tune the centrifuge for optimum performance over a wide range of
different applications, and in situations where process characteristics are ever changing.
Full variable speed capability is achieved by applying three (3) variable frequency drives to each
drive motor of the centrifuge respectively (main drive, conveyor drive, and feed rate). This
allows operators to adjust the differential rpm, feed rate and “G” of the centrifuge while in fill
operation.
A Pro Logic Control (PLC) and touch screen can also be added to the control system providing a
level of control logic to help achieve your process automation and preset parameter needs.
________________________________________________________________________
Tecumseh Industries Ltd. www.tecumsehcentrifuges.ca 604 – 21st Street SE, High River, Alberta T1V 2A6 � Telephone: (403) 601-2424 � Facsimile: (403) 601-2473
Tec-1655-FVS Centrifuge Solids Discharge End Tec-1655-FVS Centrifuge Liquid Discharge End
Tec-1655-FVS Centrifuge Conveyor Drive Assembly
Centrifuge Applications:
• Drilling Fluids Processing
• Dewatering
• Barite Recovery
• Rendering
• Waste Fluids Treatment, Recovery, and Disposal
• Produced Water Processing
• Pulp and Paper
• Sump Cleaning
• Heavy Oil Drilling and Plant Processes
• Distillers (Brewing Industry)
Processing Specifications
Maximum Hydraulic Capacity is 265 GPM/min. or 1 MP
3
/min. (rated with water)
Maximum Rate of Solid Loading: 14,000 lbs/hour (7 tons/hour)
________________________________________________________________________
Tecumseh Industries Ltd. www.tecumsehcentrifuges.ca 604 – 21st Street SE, High River, Alberta T1V 2A6 � Telephone: (403) 601-2424 � Facsimile: (403) 601-2473
Operating Speeds for Oilfield Applications
Low Speed Operations for High Gravity solids removal (i.e. barite)
Bowl Speed: 1,480 – 2,000 RPM
Acceleration: 498 - 908 g
Differential: 40 - 60 RPM
High Speed Operations for Low Gravity solids removal (i.e. fine drilled solids)
Bowl Speed: 2,814 – 3,050 RPM
Acceleration: 1,800 – 2,113 g
Differential: 25 - 40 RPM
Maximum Safe Operating Speed
Bowl Speed: 3,700 RPM (Max Recommend: 3,250 RPM)
Acceleration @ 3,250 RPM: 2,400 G’s
Differential: 60 RPM
Other Specification:
Pool Port (pond) Adjustment
1 – 13 units of adjustment.
Beach Angle
10 degree beach angle
Flighting Pitch
110mm (4.25 in.)
Maximum Safe Operating Conveyor Torque
100,000 in/lbs (11.3 kNn) of torque
Gearbox Ratio
56:1 ratio
________________________________________________________________________
Tecumseh Industries Ltd. www.tecumsehcentrifuges.ca 604 – 21st Street SE, High River, Alberta T1V 2A6 � Telephone: (403) 601-2424 � Facsimile: (403) 601-2473
‘G’ Force Calculation
"G" Force Produced
0
200
400
600
800
1000
1200
1400
1600
1800
2000
2200
2400
2600
2800
3000
900 1100 1300 1500 1700 1900 2100 2300 2500 2700 2900 3100 3300 3500 3700
Bowl RPM
The following is a formula used to calculate ‘G’ force:
G = Bowl Diameter (in) X Bowl RPM2
X .0000142
“G” Force