technical information / datasheet · technical information / datasheet . connection extension sk...

86
Technical Information / Datasheet Connection extension SK TIE4-M12-PBR 1.1 Extensive revision 2414 Bch TI 275274500 EN version reason for change(s) issue name document speech SK TIE4-M12-PBR Part number: 275 274 500 PROFIBUS DP input and output connection extension M12 BUS system connector Scope of delivery 1 x M12 Socket connector SK TIE4-M12-PBR 1 x M12 Plug connector 2 x Cover cap violet As-delivered status with screwed-on connector cover Field of use The M12 Socket connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the PROFIBUS DP technology option with the outgoing PROFIBUS DP field bus cables at the input and output sides. Technical data Version Temperature range -30 … +90 °C Weight (per component) 23 g Contact insert Colour / Material Violet / RAL 4001 Plastic Connector cover Colour / Material Violet / RAL 4001 Plastic Round plug connector Material Metal, CuZn, nickel plated Protection class (screwed) IP67 Fastening Hexagonal nut M16x1.5 * Connection / Type Round plug connector M12x1, adjustable Receptacle connector with flexible strand M16x1.5, metric screw thread Tightening torques * M12x1 Socket plug connectors M16x1.5 Screw thread. 0.6 Nm 1.5 Nm Contact insert Contacts / Coding 5 pin, B - coded * Suitable assembly spanner commercially available (see Installation)

Upload: others

Post on 15-Mar-2020

16 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet

Connection extension SK TIE4-M12-PBR 1.1 Extensive revision 2414 Bch TI 275274500 EN

version reason for change(s) issue name document speech

Pos: 3 /Technische Infor mationen/Anschlusser weiter ung en [HAN , H Q,SK T IE]/Steckverbi nder [H AN, H Q, SK TIE]/M12 Steuersignal- und Bussystem- Steckver binder/SK TIE4-M12-PBR / 275274500/Basisinfor mationen [SK T IE4-M12-PBR] @ 4\mod_1391775826150_388.docx @ 116736 @ 5555 @ 1

SK TIE4-M12-PBR Part number: 275 274 500

PROFIBUS DP input and output connection extension M12 BUS system connector

Scope of delivery

1 x M12 Socket connector SK TIE4-M12-PBR

1 x M12 Plug connector 2 x Cover cap violet As-delivered status with screwed-on connector cover

Field of use

The M12 Socket connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the PROFIBUS DP technology option with the outgoing PROFIBUS DP field bus cables at the input and output sides.

Technical data

Version

Temperature range -30 … +90 °C Weight (per component) 23 g Contact insert Colour / Material

Violet / RAL 4001 Plastic

Connector cover Colour / Material

Violet / RAL 4001 Plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable Receptacle connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Socket plug connectors M16x1.5 Screw thread.

0.6 Nm 1.5 Nm

Contact insert Contacts / Coding

5 pin, B - coded

* Suitable assembly spanner commercially available (see Installation)

Page 2: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-PBR

2 / 6 TI 275274500 - 2414

Cable

Number of cores / cross-section Socket connector Plug connector

4 x 0.34 mm2

2 x 0.34 mm2

Mech. Service life min. 100 plugging cycles

Flexible strands / colours Socket connector Plug connector

UL (br, gn, bl, rd) (gn, rd)

Operating voltage max. 60 V

Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Circuit diagram

Pos: 17 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing.

** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation

*** With optional SK TIE4-M20-M16 connection reduction

Page 3: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-PBR

TI 275274500 - 2414 3 / 6

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions. Pos: 19 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Installation steps for installation of the M12 Receptable connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17 open-ended spanner.

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptable connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

Page 4: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-PBR

4 / 6 TI 275274500 - 2414

5. Align coding pin / coding groove vertically to 12 o'clock by rotating the front hexagonal nut.

Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner. Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is

properly screwed onto the M12 Receptable connector and tightened.

Pos: 20 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 24 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-PBR / 275274500/Anschl üsse [SK TIE4-M 12- PBR ] @ 4\mod_1391775824570_388.docx @ 116711 @ 55 @ 1

Page 5: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-PBR

TI 275274500 - 2414 5 / 6

Connections

The open cable ends of the connection extension / M12 Socket connector are connected to the terminal strip of the BUS connection unit (technology box) or the BUS customer interface in the frequency inverter or the motor starter (see below).

Frequency inverter and motor starter

BUS technology box SK TU4-PBR (-M12) / (-C)

BUS customer interface SK CU4-PBR

Electrical connections

Connection extension M12 Plug connector SK TIE4-M12-PBR

BUS technology box SK TU4-PBR (-M12) /( -C)

BUS connection unit SK TI4-TU-BUS (-C)

BUS customer interface SK CU4-PBR

Contact assignments

2-pole Plug connector

B - coded

Pin ** Colour ** Signal Contact Designation Contact Designation 2 green PBR A 5 PB A IN 81 PBR A 4 red PBR B 3 PB B IN 82 PBR B

** the colour assignments and the colour-pin assignments were different in the pilot series:

Pin Colour Signal Contact Designation Contact Designation 2 green PBR A 5 PB A IN 81 PBR A 4 red PBR B 3 PB B IN 82 PBR B

Connection extension M12 Socket connector

SK TIE4-M12-PBR

BUS technology box SK TU4-PBR (-M12) / (-C)

BUS connection unit SK TI4-TU-BUS (-C)

BUS customer interface SK CU4-PBR

Contact assignments

4-pole Socket connector

B - coded

Pin * Colour * Signal Contact Designation Contact Designation 1 brown +5V 10 +5 47 5V 2 green PBR A 6 PB A OUT 81 PBR A 3 blue GND 8 0V B 46 0V B 4 red PBR B 4 PB B OUT 82 PBR B

* the colour assignments and the colour-pin assignments were different in the pilot series:

Pin Colour Signal Contact Designation Contact Designation 1 red +5V 10 +5 47 5V 2 white PBR A 6 PB A OUT 81 PBR A 3 blue GND 8 0V B 46 0V B 4 black PBR B 4 PB B OUT 82 PBR B

Pos: 37 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Page 6: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-PBR

6 / 6 TI 275274500 - 2414

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 40 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-PBR / 275274500/Weiterführende D okumentati onen [SK TIE4-M 12- PBR ] @ 4\mod_1391775827058_388.docx @ 116761 @ @ 1

Further documentation (www.nord.com)

Document Designation Document Designation

BU 0135 Motor starter manual SK 105E … SK 175E TI 275281150 PROFIBUS DP bus interface SK TU4-PBR-C BU 0180 Frequency inverter manual SK 180E, SK 190E TI 275281200 PROFIBUS DP bus interface SK TU4-PBR-M12 BU 0200 SK 2xxE frequency inverter manual BU 0220 PROFIBUS DP for SK 200E TI 275281250 PROFIBUS DP bus interface SK TU4-PBR-M12-C

TI 275280000 Bus connection unit SK TI4-TU-BUS

TI 275280500 Bus connection unit SK TI4-TU-BUS-C TI 275274510 Connection extension SK TIE4-M12-M16

TI 275271000 PROFIBUS DP bus interface SK CU4-PBR TI 275274511 Connection reduction SK TIE4-M20-M16 TI 275281000 PROFIBUS DP bus interface SK TU4-PBR

=== Ende der Liste für Textmar ke Inhalt ===

Page 7: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet

Connection extension SK TIE4-M12-CAO 1.2 Extensive revision 2414 Bch TI 275274501 EN

version reason for change(s) issue name document speech

Pos: 1 /Technische Infor mationen/Anschlusser weiter ung en [HAN , H Q,SK T IE]/Steckverbi nder [H AN, H Q, SK TIE]/M12 Steuersignal- und Bussystem- Steckver binder/SK TIE4-M12-CAO / 275274501/Basisinfor mationen [SK T IE4-M12-CAO] @ 4\mod_1382009922977_388.docx @ 102432 @ 5555 @ 1

SK TIE4-M12-CAO Part number: 275 274 501

CANopen connection extension M12 BUS system connector

Scope of delivery

1 x M12 Plug connector SK TIE4-M12-CAO

1 x Cover cap grey As-delivered status with screwed-on connector cover

Field of use

The M12 Plug connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the CANopen technology option with the incoming CANopen field bus cable at the input side.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Colour / Material

Grey / RAL 7042 Plastic

Connector cover Colour / Material

Grey / RAL 7042 Plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable Plug connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Male socket connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact insert Contacts / Coding

5 pin, A - coded

* Suitable assembly spanner commercially available (see Installation)

Cable

Number of conductors / Cross section

5 x 0.34 mm2 Mech. Service life min. 100 plugging cycles

Wire strands / colours UL / (wt, br, bl, bk, gr) Operating voltage max. 60 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Page 8: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-CAO

2 / 5 TI 275274501 - 2414

Circuit diagram

Pos: 17 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing.

** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation

*** With optional SK TIE4-M20-M16 connection reduction

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions. Pos: 19 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation steps described in the following apply to the installation of the M12 Receptacle connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Installation steps for installation of the M12 Receptacle connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17 open-ended spanner.

Page 9: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-CAO

TI 275274501 - 2414 3 / 5

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptacle connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptacle connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptacle connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptacle connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptacle connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

5. Align coding pin / coding groove vertically to 12 o'clock by rotating the front hexagonal nut.

Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner.

Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is properly screwed onto the M12 Receptaclle connector and tightened.

Pos: 20 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Page 10: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-CAO

4 / 5 TI 275274501 - 2414

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 22 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-CAO / 275274501/Anschl üsse [SK TIE4-M 12-C AO] @ 4\mod_1382018748132_388.docx @ 102601 @ 55 @ 1

Connections

The open cable ends of the extension / M12 Plug connector are connected to the terminal strip of the BUS connection unit (technology box) or the BUS customer interface in the frequency inverter (see below).

BUS connection unit SK TI4-TU-BUS (-C)

BUS technology box SK TU4-CAO (-M12) /( -C)

BUS customer interface SK CU4-CAO

Electrical connections

Connection extension M12 Plug connector SK TIE4-M12-CAO

BUS technology box SK TU4-CAO (-M12 )/ (-C)

BUS connection unit SK TI4-TU-BUS (-C)

BUS customer interface SK CU4-CAO

Contact assignments

5-pole Plug connector

A-coded

Pin Colour Signal Contact Designation Contact Designation 1 white Shield 9 SHLD 90 SHLD 2 Brown +24 V 1 24V-B CAO 45 24V bus 3 Blue GND 7 GND B CAO 46 GND Bus 4 Black CAN_H 3 CAO+ OUT 75 (incoming) CANopen+ 5 grey CAN_L 5 CAO- OUT 76 (incoming) CANopen-

Pos: 37 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Page 11: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-CAO

TI 275274501 - 2414 5 / 5

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 38 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-CAO / 275274501/Wei terführende D okumentati onen [SK TIE4-M 12-C AO] @ 4\mod_1381136857579_388.docx @ 100676 @ 5 @ 1

Further documentation (www.nord.com)

Document Designation Document Designation

BU 0180 SK 180E, SK 190E frequency inverter manual TI 275281151 CANopen bus interface SK TU4-CAO-C BU 0200 Frequency inverter manual SK 2xxE TI 275281201 CANopen bus interface SK TU4-CAO-M12 BU 0260 CANopen for SK 200E manual TI 275281251 CANopen bus interface SK TU4-CAO-M12-C

BU 0280 DEVICENET for SK 200E manual TI 275271002 DeviceNet bus interface SK CU4-DEV

TI 275280000 Bus connection unit SK TI4-TU-BUS TI 275281102 DeviceNet bus interface SK TU4-DEV

TI 275280500 Bus connection unit SK TI4-TU-BUS-C TI 275281152 DeviceNet bus interface SK TU4-DEV-C

TI 275274510 Connection extension SK TIE4-M12-M16 TI 275281202 DeviceNet bus interface SK TU4-DEV-M12 TI 275274511 Connection reduction SK TIE4-M20-M16 TI 275281252 DeviceNet bus interface SK TU4-DEV-M12-C

TI 275271001 CANopen bus interface SK CU4-CAO TI 275274515 Connection extension SK TIE4-M12-CAO-OUT TI 275281101 CANopen bus interface SK TU4-CAO

=== Ende der Liste für Textmar ke Inhalt ===

Page 12: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet

Connection extension SK TIE4-M12-ASI 1.2 Extensive revision 2414 Bch TI 275274502 EN

version reason for change(s) issue name document speech

Pos: 4 /Technische Infor mationen/Anschlusser weiter ung en [HAN , H Q,SK T IE]/Steckverbi nder [H AN, H Q, SK TIE]/M12 Steuersignal- und Bussystem- Steckver binder/SK TIE4-M12-ASI / 275274502/Basisi nformati onen [SK TIE4-M 12- ASI] @ 4\mod_1392020076032_388.docx @ 117054 @ 5555 @ 1

SK TIE4-M12-ASI Part number: 275 274 502

AS interface connection extension M12 BUS system connector

Scope of delivery

1 x M12 Plug connector SK TIE4-M12-ASI

1 x Cover cap yellow As-delivered status with screwed-on connector cover

Field of use

The M12 Plug connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the AS Interface technology option with the incoming AS Interface field bus cable at the input side.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Colour / Material

Grey / RAL 1018 Plastic

Connector cover Colour / Material

Yellow / RAL 1018 Plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable Plug connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Socket connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact set Contacts / Coding

5 pin, A - coded

* Suitable assembly spanner commercially available (see Installation)

Cable

Number of conductors / Cross section

2 x 0.34 mm2 Mech. Service life min. 100 plugging cycles

Wire strands / colours UL / (br, bl) Operating voltage max. 250 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Page 13: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ASI

2 / 4 TI 275274502 - 2414

Circuit diagram

Pos: 17 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing.

** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation

*** With optional SK TIE4-M20-M16 connection reduction

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions. Pos: 19 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Installation steps for installation of the M12 Receptacle connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17 open-ended spanner.

Page 14: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ASI

TI 275274502 - 2414 3 / 4

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptable connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

5. Align coding pin / coding groove vertically to 12 o'clock by rotating the front hexagonal nut.

Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner.

Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is properly screwed onto the M12 Receptable connector and tightened.

Pos: 20 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Page 15: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ASI

4 / 4 TI 275274502 - 2414

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 25 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-ASI / 275274502/Anschl üsse [SK TIE4-M12-ASI] @ 4\mod_1392020075200_388.docx @ 117029 @ 55 @ 1

Connections

The open cable ends of the extension / M12 Plug connector are connected to the terminal strip of the BUS connection unit (technology box), the BUS customer interface or the control terminal strip in the frequency inverter or the motor starter (see below).

Frequency inverter and motor starter

BUS connection unit SK TI4-TU-BUS (-C)

BUS technology box (SK TU4-… (-M12) / (-C)

Electrical connections

Connection extension M12 Plug connector

SK TIE4-M12-ASI

Connecting terminals SK 1x5E, SK 180 … 190E,

SK 22xE, SK 23xE

Contact assignments

2-pole Plug connector

A-coded

Pin Colour Signal Contact Designation 1 brown ASI + 84 ASI + 3 blue ASI - 85 ASI -

Pos: 37 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 41 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-ASI / 275274502/Weiterführende Dokumentationen [SK TIE4-M12-ASI] @ 4\mod_1392020077302_388.docx @ 117079 @ 5 @ 1

Further documentation (www.nord.com)

Document Designation Document Designation

BU 0090 AS interface (SK 300E … SK 750E) TI 275280500 Bus connection unit SK TI4-TU-BUS-C BU 0135 Motor starter manual SK 105E … SK 175E TI 275274510 Connection extension SK TIE4-M12-M16 BU 0180 Frequency inverter manual SK 180E, SK 190E TI 275274511 Connection reduction SK TIE4-M20-M16 BU 0200 SK 2xxE frequency inverter manual TI 275274513 Connection extension SK TIE4-M12-ASI-AUX

TI 275280000 Bus connection unit SK TI4-TU-BUS === Ende der Liste für Textmar ke Inhalt ===

Page 16: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet

Connection extension SK TIE4-M12-INI 1.1 Extensive revision 2414 Bch TI 275274503 EN

version reason for change(s) issue name document speech

Pos: 5 /Technische Infor mationen/Anschlusser weiter ung en [HAN , H Q,SK T IE]/Steckverbi nder [H AN, H Q, SK TIE]/M12 Steuersignal- und Bussystem- Steckver binder/SK TIE4-M12-INI / 275274503/Basisi nformati onen [SK TIE4-M 12- INI] @ 4\mod_1391594178437_388.docx @ 114930 @ 5555 @ 1

SK TIE4-M12-INI Part number: 275 274 503

Connection extension for initiators and actuators M12 control system connector

Scope of delivery

1 x M12 Socket connector SK TIE4-M12-INI

1 x Cover cap black As-delivered status with screwed-on connector cover

Field of use

The M12 Socket connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the technology option with the outgoing control signal cable at the output side.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Colour / Material

Black / RAL 9005 Plastic

Connector cover Colour / Material

Black / RAL 9005 Plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable Socket connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Socket connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact set Contacts / Coding

5 pin, A - coded

* Suitable assembly spanner commercially available (see Installation)

Cable

Number of conductors / Cross section

4 x 0.34 mm2 Mech. Service life min. 100 plugging cycles

Wire strands / colours UL / (br, wt, bl, bk) Operating voltage max. 250 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Page 17: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INI

2 / 5 TI 275274503 - 2414

Circuit diagram

Pos: 17 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing. ** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation *** With optional SK TIE4-M20-M16 connection reduction

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions. Pos: 19 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation steps described in the following apply to the installation of the M12 Receptacle connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Installation steps for installation of the M12 Receptacle connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17

open-ended spanner.

Page 18: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INI

TI 275274503 - 2414 3 / 5

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptacle connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptacle connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptacle connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptacle connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptacle connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

5. Align coding pin / coding groove vertically to 12 o'clock by rotating the front hexagonal nut.

Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner.

Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is properly screwed onto the M12 Receptacle connector and tightened.

Pos: 20 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Page 19: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INI

4 / 5 TI 275274503 - 2414

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 26 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-IN I / 275274503/Anschlüsse [SK T IE4-M12-INI] @ 4\mod_1391594177471_388.docx @ 114905 @ 55 @ 1

Connections

The open cable ends of the connection extension / M12 Socket connector are connected to the terminal strip of the BUS connection unit (technology box), the customer interface or the control terminal strip in the frequency inverter or motor starter (see below).

Frequency inverter and motor starter

BUS connection unit SK TI4-TU-BUS (-C)

Technology box SK TU4-… (-M12) / (-C)

Customer interface SK CU4-…

Electrical connections

Connection extension

M12 Socket connector

SK TIE4-M12-PBR

Connection terminals***

SK 1x5E, SK 180E … SK 190E,

SK 2xxE

Technology box SK TU4-… (-M12) / (-C)

Connection unit SK TI4-TU-BUS (-C)

Customer interface

SK CU4-…

Initi

ator

s

Pin Colour Signal Contact Designation Contact Designation Contact Designation 1 brown +24 V 43/44 ** 24 V 11/12 24 V 44 +24 V 2 white DIN 1-4 21-24 DIN1-4 19/20/25/26 DIN 1-4 C1/C2 DIN 1-4 3 blue GND 40 GND 15/17 GND 40 GND Bus 4 black DIN 1-4 21-24 DIN 1-4 19/20/25/26 DIN 1-4 C1/C2 DIN 1-4

Act

uato

rs* Pin Colour Signal Contact Designation Contact Designation Contact Designation

1 brown +24 V 43 +24 V 44 24 V 31/32 24 V 2 white DOUT 1 1 DOUT 1 1 DOUT 1 33 DOUT 1 3 blue GND 40 GND 40 GND 35/36 0 V 4 black DOUT 2 3 DOUT 2 3 DOUT 2 34 DOUT 2

* Only possible with series SK 2x0E devices ** 43: 24 V internal, SK 2x0E; 44: 24 V external, SK 2x5E *** For series SK1xxE devices: Replace existing pin fork terminals with 8 mm wire end sleeves, otherwise secure contact cannot be guaranteed

over the long term.

Contact assignments

4-pole Socket

connector A - coded

Pos: 37 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Page 20: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INI

TI 275274503 - 2414 5 / 5

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 42 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-IN I / 275274503/Weiterführ ende Dokumentationen [SK T IE4-M12-INI] @ 4\mod_1391594179269_388.docx @ 114955 @ @ 1

Further documentation (www.nord.com)

Document Designation Document Designation

BU 0135 Motor starter manual SK 105E … SK 175E TI 275271001 CANopen bus interface SK CU4-CAO BU 0180 Frequency inverter manual SK 180E, SK 190E TI 275281101 CANopen bus interface SK TU4-CAO BU 0200 Frequency inverter manual SK 2xxE TI 275281151 CANopen bus interface SK TU4-CAO-C

TI 275280000 Bus connection unit SK TI4-TU-BUS TI 275281201 CANopen bus interface SK TU4-CAO-M12

TI 275280500 Bus connection unit SK TI4-TU-BUS-C TI 275281251 CANopen bus interface SK TU4-CAO-M12-C

TI 275274510 Connection extension SK TIE4-M12-M16 TI 275271002 DeviceNet bus interface SK CU4-DEV TI 275274511 Connection reduction SK TIE4-M20-M16 TI 275281102 DeviceNet bus interface SK TU4-DEV TI 275271010 Electronic brake rectifier, SK CU4-MBR TI 275281152 DeviceNet bus interface SK TU4-DEV-C TI 275271011 Setpoint converter, SK CU4-REL TI 275281202 DeviceNet bus interface SK TU4-DEV-M12 TI 275271006 IO extension SK CU4-IOE TI 275281252 DeviceNet bus interface SK TU4-DEV-M12-C

TI 275281106 IO extension SK TU4-IOE TI 275271019 Ethernet/IP bus interface SK CU4-EIP

TI 275281156 IO extension SK TU4-IOE-C TI 275281119 Ethernet/IP bus interface SK TU4-EIP

TI 275281206 IO extension SK TU4-IOE-M12 TI 275281169 Ethernet/IP bus interface SK TU4-EIP-C

TI 275281256 IO extension SK TU4-IOE-M12-C TI 275271018 POWERLINK bus interface SK CU4-POL

TI 275271108 24 V power supply SK CU4-24V-123 TI 275281118 POWERLINK bus interface SK TU4-POL

TI 275271109 24 V power supply SK CU4-24V-140 TI 275281168 POWERLINK bus interface SK TU4-POL-C

TI 275281108 24 V power supply SK TU4-24V-123 TI 275271015 PROFINET bus interface SK CU4-PNT

TI 275281109 24 V power supply SK TU4-24V-140 TI 275281115 PROFINET bus interface SK TU4-PNT

TI 275281158 24 V power supply SK TU4-24V-123-C TI 275281165 PROFINET bus interface SK TU4-PNT-C

TI 275281159 24 V power supply SK TU4-24V-123-C TI 275281122 PROFINET bus interface SK TU4-PNT-M12

TI 275271000 PROFIBUS DP bus interface SK CU4-PBR TI 275281172 PROFINET bus interface SK TU4-PNT-M12-C

TI 275281000 PROFIBUS DP bus interface SK TU4-PBR TI 275271017 EtherCAT bus interface SK CU4-ECT

TI 275281150 PROFIBUS DP bus interface SK TU4-PBR-C TI 275281117 EtherCAT bus interface SK TU4-ECT

TI 275281200 PROFIBUS DP bus interface SK TU4-PBR-M12 TI 275281167 EtherCAT bus interface SK TU4-ECT-C

TI 275281250 PROFIBUS DP bus interface SK TU4-PBR-M12-C

=== Ende der Liste für Textmar ke Inhalt ===

Page 21: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet SK TIE4-M12-SYSM

Connection extension TI 275274505 1.3 0217 EN

Pos: 6 /Technische Infor mationen/Anschlusser weiter ung en [HAN , H Q,SK T IE]/Steckverbi nder [H AN, H Q, SK TIE]/M12 Steuersignal- und Bussystem- Steckver binder/SK TIE4-M12-SYSM / 275274505/Basisi nformati onen [SK TIE4-M 12- SYSM] @ 4\mod_1391594196682_388.docx @ 115005 @ 5555 @ 1

SK TIE4-M12-SYSM Part number: 275 274 505

System bus output connection extension M12 BUS system connector

Scope of delivery

1 x M12 Socket connector SK TIE4-M12-SYSM

1 x Cover cap blue As-delivered status with screwed-on connector cover

Field of use

The M12 Socket connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the system bus technology option to the outgoing field bus cable at the output side.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Colour / Material

Blue / RAL 5012 plastic

Connector cover Colour / Material

Blue / RAL 5012 plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable Socket connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Socket connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact set Contacts / Coding

5 pin, A - coded

* Suitable spanner commercially available (see Installation)

Cable

Number of conductors / Cross section

4 x 0.34 mm2 Mech. Service life min. 100 plugging cycles

Wire strands / colours UL / (br, bl, bk, gr) Operating voltage max. 60 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Page 22: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SYSM

2 / 5 TI 275274505 - 0217

Circuit diagram

Pos: 18 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing.

** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation

*** With optional SK TIE4-M20-M16 connection reduction

Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions.

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Installation steps for installation of the M12 Receptable connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17 open-ended spanner.

Page 23: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SYSM

TI 275274505 - 0217 3 / 5

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptable connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

5. Align coding pin / coding groove vertically to 12 o'clock by rotating

the front hexagonal nut. Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner.

Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is properly screwed onto the M12 Receptable connector and tightened.

Pos: 22 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 23 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Page 24: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SYSM

4 / 5 TI 275274505 - 0217

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 29 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-SYSM / 275274505/Anschlüsse [SK T IE4-M12-SYSM] @ 4\mod_1391594195878_388.docx @ 114980 @ 55 @ 1

Connections

The open cable ends of the connection extension / M12 socket connector are connected to the terminal strip of the BUS connection unit (technology box), the BUS customer interface or the control terminal strip in the frequency inverter (see below).

Frequency inverter BUS connection unit (SK TI4-TU-BUS (-C))

BUS technology box (SK TU4-… (-M12) / (-C))

Electrical connections

Connection extension M12 Socket connector

SK TIE4-M12-SYSM

Connection terminals SK 180E … 190E,

SK 2xxE

BUS technology box SK TU4-… (-M12) / (-C) BUS connection unit SK TI4-TU-BUS (-C)

Contact assignments

4-pole Socket

connector A - coded

Pin * Colour * Signal Contact Designation Contact Designation 2 brown +24 V 43/44 ** +24 V 13 24 V 3 blue GND 40 0 V GND 17 0 V GND 4 black CAN_H 77 SYS H 14 SYS + 5 grey CAN_L 78 SYS L 16 SYS -

**43: 24 V internal, SK 180E…SK 190E, SK 2x0E; 44: 24 V external, SK 2x5E

*the colour assignments and the colour-pin assignments were different in the pilot series

Pin Colour Signal Contact Designation Contact Designation 2 red +24 V 43/44 ** +24 V 13 24 V 3 blue GND 40 0 V GND 17 0 V GND 4 black CAN_H 77 SYS H 14 SYS + 5 grey CAN_L 78 SYS L 16 SYS -

Pos: 40 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Page 25: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SYSM

TI 275274505 - 0217 5 / 5

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 46 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-SYSM / 275274505/Weiterführ ende Dokumentationen [SK T IE4-M12-SYSM] @ 4\mod_1391594197434_388.docx @ 115030 @ @ 1

Further documentation (www.nord.com)

Document Designation Document Designation BU 0180 Frequency inverter manual SK 180E, SK 190E TI 275281200 PROFIBUS DP bus interface SK TU4-PBR-M12 BU 0200 Frequency inverter manual SK 2xxE

TI 275280000 Bus connection unit SK TI4-TU-BUS TI 275281250 PROFIBUS DP bus interface SK TU4-PBR-M12-C TI 275280500 Bus connection unit SK TI4-TU-BUS-C TI 275274510 Connection extension SK TIE4-M12-M16 TI 275271015 PROFINET IO bus interface SK CU4-PNT

TI 275274511 Connection reduction SK TIE4-M20-M16 TI 275281115 PROFINET IO bus interface SK TU4-PNT TI 275271001 CANopen bus interface SK CU4-CAO TI 275281165 PROFINET IO bus interface SK TU4-PNT-C TI 275281101 CANopen bus interface SK TU4-CAO TI 275281122 PROFINET IO bus interface SK TU4-PNT-M12 TI 275281151 CANopen bus interface SK TU4-CAO-C TI 275281172 PROFINET IO bus interface SK TU4-PNT-M12-C TI 275281201 CANopen bus interface SK TU4-CAO-M12 TI 275271018 POWERLINK bus interface SK CU4-POL TI 275281251 CANopen bus interface SK TU4-CAO-M12-C TI 275281118 POWERLINK bus interface SK TU4-POL TI 275271002 DeviceNet bus interface SK CU4-DEV TI 275281168 POWERLINK bus interface SK TU4-POL-C

TI 275281102 DeviceNet bus interface SK TU4-DEV TI 275271019 Ethernet/IP bus interface SK CU4-EIP TI 275281152 DeviceNet bus interface SK TU4-DEV-C TI 275281119 Ethernet/IP bus interface SK TU4-EIP TI 275281202 DeviceNet bus interface SK TU4-DEV-M12 TI 275281169 Ethernet/IP bus interface SK TU4-EIP-C TI 275281252 DeviceNet bus interface SK TU4-DEV-M12-C TI 275271017 EtherCAT bus interface SK CU4-ECT TI 275271000 PROFIBUS DP bus interface SK CU4-PBR TI 275281117 EtherCAT bus interface SK TU4-ECT TI 275281000 PROFIBUS DP bus interface SK TU4-PBR TI 275281167 EtherCAT bus interface SK TU4-ECT-C TI 275281150 PROFIBUS DP bus interface SK TU4-PBR-C TI 275274506 Connection extension SK TIE4-M12-SYSS

=== Ende der Liste für Textmar ke Inhalt ===

Page 26: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet SK TIE4-M12-SYSS

Connection extension IT 275274506 1.3 0217 EN

Pos: 7 /Technische Infor mationen/Anschlusser weiter ung en [HAN , H Q,SK T IE]/Steckverbi nder [H AN, H Q, SK TIE]/M12 Steuersignal- und Bussystem- Steckver binder/SK TIE4-M12-SYSS / 275274506/Basisinfor mationen [SK TIE4-M12-SYSS] @ 4\mod_1392116958563_388.docx @ 117831 @ 5555 @ 1

SK TIE4-M12-SYSS Part number: 275 274 506

System bus input connection extension M12 BUS system connector

Scope of delivery

1 x M12 Plug connector SK TIE4-M12-SYSS

1 x Cover cap blue As-delivered status with screwed-on connector cover

Field of use

The M12 Plug connector has open cable ends and wire end sleeves. It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the system bus technology option to the incoming field bus cable at the input side.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Colour / Material

Blue / RAL 5012 plastic

Connector cover Colour / Material

Blue / RAL 5012 plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable Plug connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Plug connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact set Contacts / Coding

5 pin, A - coded

* Suitable assembly spanner commercially available (see Installation)

Cable

Number of conductors / Cross section

4 x 0.34 mm2 Mech. Service life min. 100 plugging cycles

Wire strands / colours UL / (br, bl, bk, gr) Operating voltage max. 60 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Page 27: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SYSS

2 / 5 IT 275274506 - 0217

Circuit diagram

Pos: 18 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing.

** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation

*** With optional SK TIE4-M20-M16 connection reduction

Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions.

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Installation steps for installation of the M12 Receptable connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17

open-ended spanner.

Page 28: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SYSS

IT 275274506 - 0217 3 / 5

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptable connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

5. Align coding pin / coding groove vertically to 12 o'clock by rotating

the front hexagonal nut. Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner.

Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is properly screwed onto the M12 Receptable connector and tightened.

Pos: 22 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 23 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Page 29: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SYSS

4 / 5 IT 275274506 - 0217

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 30 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-SYSS / 275274506/Anschl üsse [SK TIE4-M 12- SYSS] @ 4\mod_1392116957543_388.docx @ 117806 @ 55 @ 1

Connections

The open cable ends of the connection extension / M12 Plug connector are connected to the terminal strip of the BUS connection unit (technology box), the BUS customer interface or the control terminal strip in the frequency inverter or motor starter (see below).

Frequency inverter BUS connection unit (SK TI4-TU-BUS (-C))

BUS technology box (SK TU4-… (-M12) / (-C))

Electrical connections

Connection extension M12 Plug connector SK TIE4-M12-SYSS

Connection terminals SK 180E … 190E,

SK 2xxE

BUS technology box SK TU4-… (-M12) / (-C) BUS connection unit SK TI4-TU-BUS (-C)

Contact assignments

4-pole Plug connector

A - coded

Pin * Colour * Signal Contact Designation Contact Designation 2 brown +24 V 43/44 ** +24 V 11 24 V 3 blue GND 40 0 V GND 15 0 V GND 4 black CAN_H 77 SYS H 14 SYS + 5 grey CAN_L 78 SYS L 16 SYS -

** 43: 24 V internal, SK 180E…SK 190E, SK 2x0E; 44: 24 V external, SK 2x5E

* the colour assignments and the colour-pin assignments were different in the pilot series

Pin Colour Signal Contact Designation Contact Designation 2 white +24 V 43/44 ** +24 V 11 24 V 3 blue GND 40 0 V GND 15 0 V GND 4 black CAN_H 77 SYS H 14 SYS + 5 grey CAN_L 78 SYS L 16 SYS -

Pos: 40 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Page 30: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SYSS

IT 275274506 - 0217 5 / 5

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 47 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-SYSS / 275274506/Weiter führende D okumentati onen [SK TIE4-M 12- SYSS] @ 4\mod_1392116959309_388.docx @ 117856 @ @ 1

Further documentation (www.nord.com)

Document Designation Document Designation BU 0180 Frequency inverter manual SK 180E, SK 190E TI 275281200 PROFIBUS DP bus interface SK TU4-PBR-M12 BU 0200 Frequency inverter manual SK 2xxE

TI 275280000 Bus connection unit SK TI4-TU-BUS TI 275281250 PROFIBUS DP bus interface SK TU4-PBR-M12-C TI 275280500 Bus connection unit SK TI4-TU-BUS-C TI 275274510 Connection extension SK TIE4-M12-M16 TI 275271015 PROFINET IO bus interface SK CU4-PNT

TI 275274511 Connection reduction SK TIE4-M20-M16 TI 275281115 PROFINET IO bus interface SK TU4-PNT TI 275271001 CANopen bus interface SK CU4-CAO TI 275281165 PROFINET IO bus interface SK TU4-PNT-C TI 275281101 CANopen bus interface SK TU4-CAO TI 275281122 PROFINET IO bus interface SK TU4-PNT-M12 TI 275281151 CANopen bus interface SK TU4-CAO-C TI 275281172 PROFINET IO bus interface SK TU4-PNT-M12-C TI 275281201 CANopen bus interface SK TU4-CAO-M12 TI 275271018 POWERLINK bus interface SK CU4-POL TI 275281251 CANopen bus interface SK TU4-CAO-M12-C TI 275281118 POWERLINK bus interface SK TU4-POL TI 275271002 DeviceNet bus interface SK CU4-DEV TI 275281168 POWERLINK bus interface SK TU4-POL-C

TI 275281102 DeviceNet bus interface SK TU4-DEV TI 275271019 Ethernet/IP bus interface SK CU4-EIP TI 275281152 DeviceNet bus interface SK TU4-DEV-C TI 275281119 Ethernet/IP bus interface SK TU4-EIP TI 275281202 DeviceNet bus interface SK TU4-DEV-M12 TI 275281169 Ethernet/IP bus interface SK TU4-EIP-C TI 275281252 DeviceNet bus interface SK TU4-DEV-M12-C TI 275271017 EtherCAT bus interface SK CU4-ECT TI 275271000 PROFIBUS DP bus interface SK CU4-PBR TI 275281117 EtherCAT bus interface SK TU4-ECT TI 275281000 PROFIBUS DP bus interface SK TU4-PBR TI 275281167 EtherCAT bus interface SK TU4-ECT-C TI 275281150 PROFIBUS DP bus interface SK TU4-PBR-C TI 275274505 Connection extension SK TIE4-M12-SYSM

=== Ende der Liste für Textmar ke Inhalt ===

Page 31: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet SK TIE4-M12-POW

Connection extension TI 275274507 V 1.2 0217 EN

Pos: 8 /Technische Infor mationen/Anschlusser weiter ung en [HAN , H Q,SK T IE]/Steckverbi nder [H AN, H Q, SK TIE]/M12 Steuersignal- und Bussystem- Steckver binder/SK TIE4-M12-POW / 275274507/Basisinfor mationen [SK T IE4-M12-POW] @ 4\mod_1392118233450_388.docx @ 117906 @ 5555 @ 1

SK TIE4-M12-POW Part number: 275 274 507

24 V feed connection extension M12 system connector

Scope of delivery

1 x M12 Plug connector SK TIE4-M12-POW

1 x Cover cap black As-delivered status with screwed-on connector cover

Field of use

The M12 Plug connector has open cable ends and wire end sleeves. It is used to make a pluggable connection using normal commercial M12 round plug connectors and for supplying the device or the optional module with a 24 V DC supply voltage.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Colour / Material

Black / RAL 9005 Plastic

Connector cover Colour / Material

Black / RAL 9005 Plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable Plug connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Plug connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact set Contacts / Coding

4 pin, A - coded

* Suitable assembly spanner commercially available (see Installation)

Cable

Number of conductors / Cross section

2 x 0.34 mm2 Mech. Service life min. 100 plugging cycles

Wire strands / colours UL / (br, bl) Operating voltage max. 250 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Page 32: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-POW

2 / 5 TI 275274507 - 0217

Circuit diagram

Pos: 18 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing.

** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation

*** With optional SK TIE4-M20-M16 connection reduction

Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions.

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Installation steps for installation of the M12 Receptable connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17

open-ended spanner.

Page 33: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-POW

TI 275274507 - 0217 3 / 5

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptable connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

5. Align coding pin / coding groove vertically to 12 o'clock by rotating

the front hexagonal nut. Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner.

Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is properly screwed onto the M12 Receptable connector and tightened.

Pos: 22 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 23 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Page 34: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-POW

4 / 5 TI 275274507 - 0217

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 31 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-POW / 275274507/Anschlüsse [SK TIE4-M12-POW] @ 4\mod_1392117945955_388.docx @ 117881 @ 55 @ 1

Connections

The open cable ends of the connection extension / M12 Plug connector are connected to the terminal strip of the BUS connection unit (technology box), the BUS customer interface or the control terminal strip in the frequency inverter or motor starter (see below).

Frequency inverters and motor starters

BUS connection unit SK TI4-TU-BUS (-C)

Technology box SK TU4-… (-M12) / (-C)

Customer interface SK CU4-…

Electrical connections

Connection extension

M12 Plug connector SK TIE4-M12-POW

Connection terminals* SK 1x5E,

SK 180E … SK 190E, SK 2xxE

BUS technology box SK TU4-… (-M12) / (-C) BUS connection unit SK TI4-TU-BUS (-C)

Customer interface

SK CU4-…

Pin Colour Signal Contact Designation Contact Designation Contact Designation 1 brown +24 V 44 24 V 11/12 24 V 44 +24 V 3 blue GND 40 GND 15/17 GND 40 GND Bus

* For series SK 1xxE devices: Replace existing pin for terminal with 8 mm wire end sleeves, otherwise a secure contact cannot be guaranteed over the long term.

Contact assignments

2-pole Plug connector

A - coded

Pos: 40 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 48 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-POW / 275274507/Weiterführ ende D okumentati onen [SK TIE4-M12-POW] @ 4\mod_1392118240501_388.docx @ 117931 @ @ 1

Page 35: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-POW

TI 275274507 - 0217 5 / 5

Further documentation (www.nord.com)

Document Designation Document Designation

BU 0135 Motor starter manual SK 105E … SK 175E TI 275271001 CANopen bus interface SK CU4-CAO BU 0180 Frequency inverter manual SK 180E, SK 190E TI 275281101 CANopen bus interface SK TU4-CAO BU 0200 Frequency inverter manual SK 2xxE TI 275281151 CANopen bus interface SK TU4-CAO-C

TI 275280000 Bus connection unit SK TI4-TU-BUS TI 275281201 CANopen bus interface SK TU4-CAO-M12

TI 275280500 Bus connection unit SK TI4-TU-BUS-C TI 275281251 CANopen bus interface SK TU4-CAO-M12-C

TI 275274510 Connection extension SK TIE4-M12-M16 TI 275271002 DeviceNet bus interface SK CU4-DEV TI 275274511 Connection reduction SK TIE4-M20-M16 TI 275281102 DeviceNet bus interface SK TU4-DEV TI 275271010 Electronic brake rectifier, SK CU4-MBR TI 275281152 DeviceNet bus interface SK TU4-DEV-C TI 275271011 Setpoint converter, SK CU4-REL TI 275281202 DeviceNet bus interface SK TU4-DEV-M12 TI 275271006 IO extension SK CU4-IOE TI 275281252 DeviceNet bus interface SK TU4-DEV-M12-C

TI 275281106 IO extension SK TU4-IOE TI 275271019 Ethernet/IP bus interface SK CU4-EIP

TI 275281156 IO extension SK TU4-IOE-C TI 275281119 Ethernet/IP bus interface SK TU4-EIP

TI 275281206 IO extension SK TU4-IOE-M12 TI 275281169 Ethernet/IP bus interface SK TU4-EIP-C

TI 275281256 IO extension SK TU4-IOE-M12-C TI 275271018 POWERLINK bus interface SK CU4-POL

TI 275271108 24 V power supply SK CU4-24V-123 TI 275281118 POWERLINK bus interface SK TU4-POL

TI 275271109 24 V power supply SK CU4-24V-140 TI 275281168 POWERLINK bus interface SK TU4-POL-C

TI 275281108 24 V power supply SK TU4-24V-123 TI 275271015 PROFINET bus interface SK CU4-PNT

TI 275281109 24 V power supply SK TU4-24V-140 TI 275281115 PROFINET bus interface SK TU4-PNT

TI 275281158 24 V power supply SK TU4-24V-123-C TI 275281165 PROFINET bus interface SK TU4-PNT-C

TI 275281159 24 V power supply SK TU4-24V-123-C TI 275281122 PROFINET bus interface SK TU4-PNT-M12

TI 275271000 PROFIBUS DP bus interface SK CU4-PBR TI 275281172 PROFINET bus interface SK TU4-PNT-M12-C

TI 275281000 PROFIBUS DP bus interface SK TU4-PBR TI 275271017 EtherCAT bus interface SK CU4-ECT

TI 275281150 PROFIBUS DP bus interface SK TU4-PBR-C TI 275281117 EtherCAT bus interface SK TU4-ECT

TI 275281200 PROFIBUS DP bus interface SK TU4-PBR-M12 TI 275281167 EtherCAT bus interface SK TU4-ECT-C

TI 275281250 PROFIBUS DP bus interface SK TU4-PBR-M12-C

=== Ende der Liste für Textmar ke Inhalt ===

Page 36: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet SK TIE4-M12-ANA

Connection extension TI 275274508 V 1.1 2414 EN

Pos: 9 /Technische Infor mationen/Anschlusser weiter ung en [HAN , H Q,SK T IE]/Steckverbi nder [H AN, H Q, SK TIE]/M12 Steuersignal- und Bussystem- Steckver binder/SK TIE4-M12-ANA / 275274508/Basisinfor mationen [SK T IE4-M12-AN A] @ 4\mod_1391594203025_388.docx @ 115080 @ 5555 @ 1

SK TIE4-M12-ANA Part number: 275 274 508

Connection extension for analogue initiators and actuators M12 system plug connector

Scope of delivery

1 x M12 Socket connector SK TIE4-ANA

1 x Cover cap white As-delivered status with screwed-on connector cover

Field of use

The M12 Socket connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the technology option with the outgoing connecting cable.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Colour / Material

White / RAL 9010 plastic

Connector cover Colour / Material

White / RAL 9010 plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable Socket connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Socket connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact set Contacts / Coding

5 pin, A - coded

* Suitable assembly spanner commercially available (see Installation)

Cable

Number of conductors / Cross section

5 x 0.34 mm2 Mech. Service life min. 100 plugging cycles

Wire strands / colours UL / (br, wt, bl, bk, rd) Operating voltage max. 60 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Page 37: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ANA

2 / 5 TI 275274508 - 2414

Circuit diagram

Pos: 17 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing. ** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation *** With optional SK TIE4-M20-M16 connection reduction

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions. Pos: 19 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Installation steps for installation of the M12 Receptable connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17 open-ended spanner.

Page 38: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ANA

TI 275274508 - 2414 3 / 5

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptable connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

5. Align coding pin / coding groove vertically to 12 o'clock by rotating the front hexagonal nut.

Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner.

Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is properly screwed onto the M12 Receptable connector and tightened.

Pos: 20 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Page 39: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ANA

4 / 5 TI 275274508 - 2414

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 30 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-AN A / 275274508/Anschl üsse [SK TIE4-M 12- ANA] @ 4\mod_1391594202355_388.docx @ 115055 @ 55 @ 1

Connections

The open cable ends of the connection extension / M12 Socket connector are connected to the terminal strip of the IOE connection unit (technology box), the IOE customer interface in the frequency inverter or the connection terminals of the frequency inverter (see below).

Frequency inverter

SK 180E … 190E SK 2x0E

Only performance stages with integrated power supply

IOE technology box SK TU4-IOE (-M12) / (-C)

BUS connection unit SK TI4-TU-BUS (-C)

BUS customer interface SK CU4-IOE

Electrical connections

Connection extension

M12 Socket connector

SK TIE4-M12-ANA

Connection terminals*

SK 180E … SK 190E, SK 2x0E

Technology box SK TU4-IOE (-M12) / (-C)

BUS connection unit SK TI4-TU-BUS (-C)

Customer interface

SK CU4-IOE

Contact assignments

5-pole Socket connector

A - coded

Pin Colour Signal Contact Designation Contact Designation

Initi

ator

s

1 brown +24 V 11/12 24V 44 24 V 2 white AIN1+ / 2+ 3/4 AIN1+ / 2+ 14/16 AIN1+ / 2+ 3 blue GND 7/8 0 V-A 12 AGND 4 black AIN1- / 2- 5/6 AIN1- / 2- 13/15 AIN1- / 2- 5 red +10 V 1/2 10 V-A 11 10 V

Pin Colour Signal Contact Designation Contact Designation

Act

uato

rs 1 brown +24 V 11/12 24V 44 24 V

2 white AOUT 1 9 AOUT 17 AOUT 3 blue AGND 7/8 0 V-A 12 AGND 4 black n. c. n. c. n. c. n. c. n. c. 5 red n. c. n. c. n. c. n. c. n. c.

* For series SK1x0E devices: Replace existing pin fork terminal with 8mm wire end sleeves, otherwise a secure contact cannot be guaranteed over the long term.

Pos: 37 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Page 40: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ANA

TI 275274508 - 2414 5 / 5

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 46 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-AN A / 275274508/Weiterführende D okumentati onen [SK TIE4-M 12- ANA] @ 4\mod_1391759505378_388.docx @ 116611 @ @ 1

Further documentation (www.nord.com)

Document Designation Document Designation

BU 0180 Frequency inverter manual SK 180E, SK 190E TI 275281156 IO extension SK TU4-IOE-C

BU 0200 Frequency inverter manual SK 2xxE TI 275281206 IO extension SK TU4-IOE-M12

TI 275280000 Bus connection unit SK TI4-TU-BUS TI 275281256 IO extension SK TU4-IOE-M12-C

TI 275280500 Bus connection unit SK TI4-TU-BUS-C TI 275271108 24 V power supply SK CU4-24V-123

TI 275274510 Connection extension SK TIE4-M12-M16 TI 275271109 24 V power supply SK CU4-24V-140 TI 275274511 Connection reduction SK TIE4-M20-M16 TI 275281108 24 V power supply SK TU4-24V-123 TI 275271010 Electronic brake rectifier, SK CU4-MBR TI 275281109 24 V power supply SK TU4-24V-140 TI 275271011 Setpoint converter, SK CU4-REL TI 275281158 24 V power supply SK TU4-24V-123-C TI 275271006 IO extension SK CU4-IOE TI 275281159 24 V power supply SK TU4-24V-123-C

TI 275281106 IO extension SK TU4-IOE

=== Ende der Liste für Textmar ke Inhalt ===

Page 41: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet

Connection extension SK TIE4-M12-SH 1.1 Extensive revision 2414 Bch TI 27574509 EN

version reason for change(s) issue name document speech

Pos: 10 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-SH / 275274509/Basisinfor mationen [SK TIE4-M12-SH ] @ 4\mod_1391594208067_388.docx @ 115155 @ 5555 @ 1

SK TIE4-M12-SH Part number: 275 274 509

Connection extension "secure hold" output M12 control system plug connector

Scope of delivery

1 x M12 Socket connector SK TIE4-M12-SH

1 x Cover cap yellow As-delivered status with screwed-on connector cover

Field of use

The M12 Socket connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the control terminal strip with the outgoing control signal cable at the output side.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Colour / Material

Grey / RAL 1021 Plastic

Connector cover Colour / Material

Yellow / RAL 1021 Plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 *

Connection / Type Round plug connector

M12x1, adjustable Socket connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Socket connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact set Contacts / Coding

5 pin, A - coded

* Suitable assembly spanner commercially available (see Installation)

Cable

Number of conductors / Cross section

2 x 0.34 mm2 Mech. Service life min. 100 plugging cycles

Wire strands / colours UL / (bl, bk) Operating voltage max. 60 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Page 42: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SH

2 / 4 TI 27574509 - 2414

Circuit diagram

Pos: 17 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing. ** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation *** With optional SK TIE4-M20-M16 connection reduction

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions. Pos: 19 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation steps described in the following apply to the installation of the M12 Receptacle connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Installation steps for installation of the M12 Receptacle connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17

open-ended spanner.

Page 43: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SH

TI 27574509 - 2414 3 / 4

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptacle connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptacle connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptacle connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptacle connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

5. Align coding pin / coding groove vertically to 12 o'clock by rotating the front hexagonal nut.

Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner.

Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is properly screwed onto the M12 Receptacle connector and tightened.

Pos: 20 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Page 44: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SH

4 / 4 TI 27574509 - 2414

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 31 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-SH / 275274509/Anschlüsse [SK T IE4-M12-SH] @ 4\mod_1391671681476_388.docx @ 115551 @ 55 @ 1

Connections

The open cable ends of the connection extension / M12 Socket connector are connected to the terminal strip of the control terminals in the frequency inverter (see below).

Frequency inverter SK 21xE, SK 23xE

BUS connection unit SK TI4-TU-BUS (-C)

BUS technology box SK TU4-… (-M12) / (-C)

Electrical connections

Connection extension M12 Socket connector

SK TIE4-M12-SH

Connection terminals SK 21xE SK 23xE

Contact assignments 2-pole

Socket connector A - coded

Pin Colour Signal Contact Designation 3 blue GND SH 88 GND SH 4 black +24 V SH 89 +24 V SH

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 47 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-SH / 275274509/Weiterführ ende Dokumentationen [SK T IE4-M12-SH] @ 4\mod_1391594208722_388.docx @ 115180 @ @ 1

Further documentation (www.nord.com)

Document Designation Document Designation

BU 0200 Frequency inverter manual SK 2xxE TI 275280500 Bus connection unit SK TI4-TU-BUS-C

BU 0230 Functional safety for SK 200E manual TI 275274510 Connection extension SK TIE4-M12-M16 TI 275280000 Bus connection unit SK TI4-TU-BUS TI 275274511 Connection reduction SK TIE4-M20-M16

=== Ende der Liste für Textmar ke Inhalt ===

Page 45: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet

Connection extension SK TIE4-M12-HTL 1.1 Extensive revision 2414 Bch TI 27527412 EN

version reason for change(s) issue name document speech

Pos: 11 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-HTL / 275274512/Basisi nfor mati onen [SK TIE4-M 12-HTL] @ 4\mod_1391594215736_388.docx @ 115230 @ 5555 @ 1

SK TIE4-M12-HTL Part number: 275 274 512

HTL rotary encoder output connection extension M12 system plug connector

Scope of delivery

1 x M12 Socket connector SK TIE4-M12-HTL

1 x Cover cap black As-delivered status with screwed-on connector cover

Field of use

The M12 Socket connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the technology option with the outgoing HTL rotary encoder cable at the output side.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Colour / Material

Black / RAL 9005 Plastic

Connector cover Colour / Material

Black / RAL 9005 Plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable Socket connector with flexible strand M16x1.5, metric screw thread

Contacts / Coding 5 pin, A - coded

Tightening torques * M12x1 Socket connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm Contact set

Contacts / Coding 5 pin, B - coded

* Suitable assembly spanner commercially available (see Installation)

Cable

Number of conductors / Cross section

4 x 0.34 mm2 Mech. Service life min. 100 plugging cycles

Wire strands / colours UL / (br, bl, bk, wt) Operating voltage max. 60 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Page 46: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-HTL

2 / 5 TI 27527412 - 2414

Circuit diagram

Pos: 17 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing. ** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation *** With optional SK TIE4-M20-M16 connection reduction

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions. Pos: 19 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Installation steps for installation of the M12 Receptable connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17

open-ended spanner.

Page 47: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-HTL

TI 27527412 - 2414 3 / 5

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptable connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

5. Align coding pin / coding groove vertically to 12 o'clock by rotating the front hexagonal nut.

Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner.

Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is properly screwed onto the M12 Receptable connector and tightened.

Pos: 20 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Page 48: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-HTL

4 / 5 TI 27527412 - 2414

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 32 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-HTL / 275274512/Anschlüsse [SK T IE4-M12-HTL] @ 4\mod_1391765971996_388.docx @ 116641 @ 55 @ 1

Connections

The open cable ends of the connection extension / M12 Socket connector are connected to the terminal strip of the control terminals in the frequency inverter (see below).

HTL rotary encoder Frequency inverter SK 2xxE

BUS technology box SK TU4-… (-M12) / -C)

Electrical connections

Connection extension M12 Socket connector

SK TIE4-M12-HTL

Connection terminals SK 2xxE

Contact assignments

4-pole Socket

connector B-coded

Pin Colour Signal Contact Designation 1 brown 24 V 43/44* 24 V 2 white TRACK B 23 DIN3 3 blue GND 40 GND

4 black TRACK A 22 DIN2 * 43: 24 V internal, SK 2x0E; 44: 24 V external, SK 2x5E

Information Connection to digital inputs The HTL rotary encoder can only be connected to DIN2 and DIN3 of the control terminal strip of the frequency inverter. The digital inputs of the customer interfaces and technology assemblies cannot be used for rotary encoders.

Pos: 37 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Page 49: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-HTL

TI 27527412 - 2414 5 / 5

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 48 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-HTL / 275274512/Weiterführ ende D okumentationen [SK T IE4-M12-HTL] @ 4\mod_1391767190241_388.docx @ 116666 @ @ 1

Further documentation (www.nord.com)

Document Designation Document Designation

BU 0200 Frequency inverter manual SK 2xxE TI 275274511 Connection reduction SK TIE4-M20-M16 TI 275280000 Bus connection unit SK TI4-TU-BUS TI 18552090 Level adaptation PCB HTL - RS422

TI 275280500 Bus connection unit SK TI4-TU-BUS-C TI 18552095 Level adaptation PCB HTL - HTL A+/- B+/-

TI 275274510 Connection extension SK TIE4-M12-M16

=== Ende der Liste für Textmar ke Inhalt ===

Page 50: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Pos: 13 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-ASI- AUX / 275274513/Basisinfor mationen [SK T IE4-M12-ASI-AU X] @ 4\mod_1392023252331_388.docx @ 117323 @ 5555 @ 1

SK TIE4-M12-ASI-AUX Part number: 275 274 513

AS interface with auxiliary power connection extension M12 BUS system connector

Scope of delivery

1 x M12 Plug connector SK TIE4-M12-ASI-AUX

1 x Cover cap yellow As-delivered status with screwed-on connector cover

Field of use

The M12 Plug connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the AS Interface technology option with the incoming AS Interface field bus cable at the input side.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Colour / Material

Yellow / RAL 1018 Plastic

Connector cover Colour / Material

Yellow / RAL 1018 Plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable Plug connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Socket connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact set Contacts / Coding

5 pin, A - coded

* Suitable assembly spanner commercially available (see Installation)

Cable

Number of conductors / Cross section

4 x 0.34 mm2 Mech. Service life min. 100 plugging cycles

Wire strands / colours UL / (br, bl) Operating voltage max. 250 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Technical Information / Datasheet SK TIE4-M12-ASI-AUX

Connection extension TI 275274513 V 1.2 4214 EN

Page 51: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ASI-AUX

Circuit diagram

os: 17 /Techni sche Infor mationen/Anschlusser weiter ung en [H AN, H Q,SK TIE]/Steckverbi nder [H AN, HQ, SK TIE]/M12 Steuersignal- und Bussystem- Steckver binder /Allgemeingül tig/Montage- / Optionsplätze [SK TIE4-M 12-. ..] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing.

** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation

*** With optional SK TIE4-M20-M16 connection reduction

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions. Pos: 19 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Installation steps for installation of the M12 Receptable connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17 open-ended spanner.

2 / 4 TI 275274513 - 4214

Page 52: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ASI-AUX

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptable connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

5. Align coding pin / coding groove vertically to 12 o'clock by rotating

the front hexagonal nut. Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner.

Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is properly screwed onto the M12 Receptable connector and tightened.

Pos: 20 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

TI 275274513 - 4214 3 / 4

Page 53: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ASI-AUX

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 34 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-ASI- AUX / 275274513/Anschl üsse [SK TIE4-M12-ASI-AU X] @ 4\mod_1392023251112_388.docx @ 117298 @ 55 @ 1

Connections

The open cable ends of the extension / M12 Plug connector are connected to the terminal strip of the BUS connection unit (technology box), the BUS customer interface or the control terminal strip in the frequency inverter or the motor starter (see below).

Frequency inverter and motor starter

BUS connection unit SK TI4-TU-BUS (-C)

BUS technology box (SK TU4-… (-M12) / (-C)

Electrical connections

Connection extension M12 Plug connector

SK TIE4-M12-ASI-AUX

Connecting terminals SK 1x5E (set jumper position at device)

SK 22xE/ 23xE-…-AxB

Contact assignments

4-pole Plug connector

A-coded

Pin Colour Signal Contact Designation 1 brown ASI + 84 ASI + 2 white GND 40 GND 3 blue ASI - 85 ASI - 4 black +24 V 44 +24 V

Pos: 37 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 50 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-ASI- AUX / 275274513/Weiterführende Dokumentati onen [SK TIE4-M12-ASI-AU X] @ 4\mod_1392023253655_388.docx @ 117348 @ 5 @ 1

Further documentation (www.nord.com)

Document Designation Document Designation

BU 0090 AS interface (SK 300E … SK 750E) TI 275280500 Bus connection unit SK TI4-TU-BUS-C BU 0135 Motor starter manual SK 105E … SK 175E TI 275274510 Connection extension SK TIE4-M12-M16 BU 0200 Frequency inverter manual SK 2xxE TI 275274511 Connection reduction SK TIE4-M20-M16

TI 275280000 Bus connection unit SK TI4-TU-BUS TI 275274502 Connection extension SK TIE4-M12-ASI

=== Ende der Liste für Textmar ke Inhalt ===

4 / 4 TI 275274513 - 4214

Page 54: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet SK TIE4-M12-ETH

Connection extension TI 275274514 V 1.0 2414 EN

Pos: 12 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-ETH / 275274514/Basisinfor mati onen [SK TIE4-M12-ETH] @ 4\mod_1391594327899_388.docx @ 115305 @ 5555 @ 1

SK TIE4-M12-ETH Part number: 275 274 514

Ethernet output connection extension M12 BUS system connector

Scope of delivery

1 x M12 Socket connector SK TIE4-M12-ETH

1 x Cover cap green Delivery status with screwed-on connector cover

Field of use

The M12 Socket connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the Ethernet technology options with the outgoing Ethernet field bus cable at the output side.

Technical data

Design

Temperature range -30 … +90 °C Weight 23 g Contact insert Colour / Material

green plastic

Connector cover Colour / Material

green plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable Socket connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Socket connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact set Contacts / Coding

* Suitable assembly spanner commercially available (see Installation)

Cable

Number of conductors / Cross section

4 x 0.34 mm2 Mech. service life: min. 100 plugging cycles

Wire strands / colours UL / (ye, wt, or, bl) Operating voltage max. 250 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Page 55: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ETH

2 / 5 TI 275274514 - 2414

Circuit diagram

Pos: 17 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing. ** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation *** With optional SK TIE4-M20-M16 connection reduction

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions. Pos: 19 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Installation steps for installation of the M12 Receptable connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17 open-ended spanner.

Page 56: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ETH

TI 275274514 - 2414 3 / 5

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptable connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

5. Align coding pin / coding groove vertically to 12 o'clock by rotating the front hexagonal nut.

Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner.

Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is properly screwed onto the M12 Receptable connector and tightened.

Pos: 20 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Page 57: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ETH

4 / 5 TI 275274514 - 2414

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 33 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-ETH / 275274514/Anschlüsse [SK T IE4-M12-ETH ] @ 4\mod_1391594327119_388.docx @ 115280 @ 55 @ 1

Connections

The open cable ends of the connection extension / M12 Socket connector are connected to the terminal strip of the BUS customer interface in the frequency inverter (see below).

Information Connection to technology box An M12 Socket connector can only be connected to Ethernet-based BUS customer interfaces. The field bus is always connected to the BUS technology boxes at the front via one or both of the integrated M12 Male socket connectors.

Frequency inverter SK 2xxE

BUS technology boxes SK TU4-… (-C)

see information above

BUS customer interfaces SK CU4-…

Ethernet-based options

Electrical connections

Connection extension M12 Socket connector

SK TIE4-M12-ETH

BUS customer interfaces SK CU4-ECT, SK CU4-POL, SK CU4-EIP, SK CU4-PNT

Contact assignments

4-pole Socket

connector D - coded

Pin Colour Signal Contact Designation 1 yellow TX + E1 / E5 Transmission Data +

2 white RX + E3 / E7 Receive Data + 3 orange TX - E2 / E6 Transmission Data - 4 blue RX - E4 / E8 Receive Data -

E1 – E4 incoming E5 – E8 outgoing

Pos: 37 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Page 58: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-ETH

TI 275274514 - 2414 5 / 5

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 49 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-ETH / 275274514/Weiterführ ende D okumentationen [SK T IE4-M12-ETH ] @ 4\mod_1391594328560_388.docx @ 115330 @ @ 1

Further documentation (www.nord.com)

Document Designation Document Designation

BU 0180 Frequency inverter manual SK 180E, SK 190E TI 275274511 Connection reduction SK TIE4-M20-M16 BU 0200 Frequency inverter manual SK 2xxE TI 275271019 Ethernet/IP bus interface SK CU4-EIP

BU 0270 EtherCAT for SK 2xxE manual TI 275271018 POWERLINK bus interface SK CU4-POL

BU 2100 EtherNet/IP™ for SK 2xxE manual TI 275271015 PROFINET bus interface SK CU4-PNT

BU 2200 POWERLINK for SK 2xxE manual TI 275271017 EtherCAT bus interface SK CU4-ECT

TI 275274510 Connection extension SK TIE4-M12-M16

=== Ende der Liste für Textmar ke Inhalt ===

Page 59: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet

Connection extension SK TIE4-M12-CAO-OUT 1.0 First Version 2414 Bch TI 275274515 EN

version reason for change(s) issue name document speech

Pos: 2 /Technische Infor mationen/Anschlusser weiter ung en [HAN , H Q,SK T IE]/Steckverbi nder [H AN, H Q, SK TIE]/M12 Steuersignal- und Bussystem- Steckver binder/SK TIE4-M12-CAO- OUT / 275274515 /Basisi nfor mati onen [SK TIE4-M12-CAO- OUT] @ 4\mod_1378827072687_388.docx @ 94458 @ 5555 @ 1

SK TIE4-M12-CAO-OUT Part number: 275 274 515

CANopen output connection extension M12 BUS system connector

Scope of delivery

1 x M12 Socket connector SK TIE4-M12-CAO-OUT

1 x Cover cap grey As-delivered status with screwed-on connector cover

Field of use

The M12 Socket connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the CANopen technology option with the outgoing CANopen field bus cable at the output side.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Colour / Material

Grey / RAL 7042 Plastic

Connector cover Colour / Material

Grey / RAL 7042 Plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable Socket connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Male socket connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact set Contacts / Coding

5 pin, A - coded

* Suitable assembly spanner commercially available (see Installation)

Cable

Number of conductors / Cross section

5 x 0.34 mm2 Mech. Service life min. 100 plugging cycles

Wire strands / colours UL / (wt, br, bl, bk, gr) Operating voltage max. 60 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Page 60: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-CAO-OUT

2 / 5 TI 275274515 - 2414

Circuit diagram

Pos: 17 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing. ** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation *** With optional SK TIE4-M20-M16 connection reduction

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions. Pos: 19 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Installation steps for installation of the M12 Receptable connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17

open-ended spanner.

Page 61: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-CAO-OUT

TI 275274515 - 2414 3 / 5

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptable connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

5. Align coding pin / coding groove vertically to 12 o'clock by rotating the front hexagonal nut.

Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner.

Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is properly screwed onto the M12 Receptable connector and tightened.

Pos: 20 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Page 62: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-CAO-OUT

4 / 5 TI 275274515 - 2414

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 23 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-CAO-OUT / 275274515 /Anschlüsse [SK T IE4-M12-CAO-OUT] @ 4\mod_1378827070308_388.docx @ 94408 @ 55 @ 1

Connections

The open cable ends of the connection extension / M12 Socket connector are connected to the terminal strip of the BUS connection unit (technology box) or the BUS customer interface in the frequency inverter (see below).

BUS connection unit SK TI4-TU-BUS (-C)

BUS technology box SK TU4-CAO (-M12) /( -C)

BUS customer interface SK CU4-CAO

Electrical connections

Connection extension M12 Socket connector K TIE4-M12-CAO-OUT

BUS technology box SK TU4-CAO (-M12) / (-C)

BUS connection unit SK TI4-TU-BUS (-C)

BUS customer interface SK CU4-CAO

Contact assignments

5-pole Socket

connector A - coded

Pin Colour Signal Contact Designation Contact Designation 1 white Shield 9 SHLD 90 SHLD 2 brown +24 V 2 24V-B CAO 45 24V Bus 3 blue GND 8 GND B CAO 46 GND Bus 4 black CAN_H 4 CAO+ OUT 75 (outgoing) CANopen+ 5 grey CAN_L 6 CAO- OUT 76 (outgoing) CANopen-

Pos: 37 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Page 63: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-CAO-OUT

TI 275274515 - 2414 5 / 5

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 39 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-CAO-OUT / 275274515 /Weiterführ ende D okumentationen [SK T IE4-M12-CAO-OUT] @ 4\mod_1381136157175_388.docx @ 100651 @ @ 1

Further documentation (www.nord.com)

Document Designation Document Designation

BU 0180 Frequency inverter manual SK 180E, SK 190E TI 275281151 CANopen – bus interface SK TU4-CAO-C BU 0200 Frequency inverter manual SK 2xxE TI 275281201 CANopen – bus interface SK TU4-CAO-M12 BU 0260 Manual CANopen for SK 200E TI 275281251 CANopen – bus interface SK TU4-CAO-M12-C

BU 0280 Manual DEVICENET for SK 200E TI 275271002 DeviceNet – bus interface SK CU4-DEV

TI 275280000 Bus connection unit SK TI4-TU-BUS TI 275281102 DeviceNet – bus interface SK TU4-DEV

TI 275280500 Bus connection unit SK TI4-TU-BUS-C TI 275281152 DeviceNet – bus interface SK TU4-DEV-C

TI 275274510 Connection extension SK TIE4-M12-M16 TI 275281202 DeviceNet – bus interface SK TU4-DEV-M12 TI 275274511 Connection reduction SK TIE4-M20-M16 TI 275281252 DeviceNet – bus interface SK TU4-DEV-M12-C

TI 275271001 CANopen – bus interface SK CU4-CAO TI 275274501 Connection extension SK TIE4-M12-CAO TI 275281101 CANopen – bus interface SK TU4-CAO

=== Ende der Liste für Textmar ke Inhalt ===

Page 64: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet SK TIE4-M12-INP

Connection extension TI 275274516 V 1.0 2414 EN

Pos: 14 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-IN P / 275274516/Basisi nformati onen [SK TIE4-M 12-IN P] @ 4\mod_1392986112988_388.docx @ 119648 @ 5555 @ 1

SK TIE4-M12-INP Part number: 275 274 516

Connection extension for initiators and 24 V M12 control system connector

Scope of delivery

1 x M12 plug connector SK TIE4-M12-INP

1 x Cover cap black As-delivered status with screwed-on connector cover

Usage area

The M12 plug connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the technology option and the control terminal strip with the outgoing control signal cable at the input side.

Information Connecting variants The three "variably" used connecting cables (IN 1, IN 2 und IN 3) can be used differently depending on the application (e.g. 24 V feeds, digital inputs etc.). More information can be found in the associated customer specification.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Colour / Material

Black / RAL 9005 Plastic

Connector cover Colour / Material

Black / RAL 9005 Plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable plug connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Plug connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact set Contacts / Coding

5 pin, A - coded

* Suitable assembly spanner commercially available (see Installation)

Cable

Number of conductors / 5 x 0.34 mm2 Mech. Service life min. 100 plugging cycles

Page 65: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INP

2 / 6 TI 275274516 - 2414

Cross section Wire strands / colours UL / (br, wt, bl, bk, rd) Operating voltage max. 250 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Circuit diagram

Pos: 17 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Plug connector cannot be installed with the SK 1xxE housing. ** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation *** With optional SK TIE4-M20-M16 connection reduction

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Plug connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions. Pos: 19 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Page 66: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INP

TI 275274516 - 2414 3 / 6

Installation steps for installation of the M12 Receptable connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17 open-ended spanner.

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptable connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

5. Align coding pin / coding groove vertically to 12 o'clock by rotating the front hexagonal nut.

Socket connector Plug connector

Page 67: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INP

4 / 6 TI 275274516 - 2414

6. Secure the front hexagonal nut with a 17 mm open-ended spanner. Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is

properly screwed onto the M12 Receptable connector and tightened.

Pos: 20 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 21 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 35 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-IN P / 275274516/Anschlüsse [SK TIE4-M12-IN P] @ 4\mod_1392986106882_388.docx @ 119603 @ 55 @ 1

Page 68: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INP

TI 275274516 - 2414 5 / 6

Connections

The open cable ends of the connection extension / M12 panel connector are connected to the terminal strip of the BUS connection unit (technology box), the BUS customer interface or the control terminal strip in the frequency inverter or motor starter (see below).

Frequency inverter and motor starter

BUS connection unit SK TI4-TU-BUS (-C)

Technology box SK TU4-… (-M12) / (-C)

BUS customer interface SK CU4-...

Electrical connections

Connection extension

M12 panel connector SK TIE4-M12-IMP

Connection terminals* SK 1x5E,

SK 180E…SK 190E, SK 2xxE

Technology box SK TU4-… (-M12) / (-C)

Connection unit SK TI4-TU-BUS (-C)

Customer interface

SK CU4-…

Pin Colour Signal Contact Designation Contact Designation Contact Designation

Initi

ator

s

1 brown +24 V 43/44 ** 24 V 11/12 24 V 44 +24 V 2 white IN 2 as required as required as required 3 blue GND 40 GND 15/17 GND 40 GND Bus 4 black IN 1 as required as required as required 5 gr IN 3 as required as required as required

* For series SK1xxE devices: Replace existing pin fork terminal with 8mm wire end sleeves, otherwise a secure contact cannot be guaranteed over the long term.

** 43: 24 V internal, SK 2x0E; 44: 24 V external, SK 2x5E

Contact assignments

5-pole Panel connector

A - coded

Pos: 37 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 51 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-IN P / 275274516/Weiterführ ende D okumentati onen [SK TIE4-M12-IN P] @ 4\mod_1392986117710_388.docx @ 119673 @ @ 1

Page 69: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INP

6 / 6 TI 275274516 - 2414

Further documentation (www.nord.com)

Document Name Document Name

BU 0135 Motor starter manual SK 105E … SK 175E TI 275271001 CANopen bus interface SK CU4-CAO BU 0180 Frequency inverter manual SK 180E, SK 190E TI 275281101 CANopen bus interface SK TU4-CAO BU 0200 SK 2xxE frequency inverter manual TI 275281151 CANopen bus interface SK TU4-CAO-C

TI 275280000 Bus connection unit SK TI4-TU-BUS TI 275281201 CANopen bus interface SK TU4-CAO-M12

TI 275280500 Bus connection unit SK TI4-TU-BUS-C TI 275281251 CANopen bus interface SK TU4-CAO-M12-C

TI 275274510 Connection extension SK TIE4-M12-M16 TI 275271002 DeviceNet bus interface SK CU4-DEV TI 275274511 Connection reduction SK TIE4-M20-M16 TI 275281102 DeviceNet bus interface SK TU4-DEV TI 275271010 Electronic brake rectifier, SK CU4-MBR TI 275281152 DeviceNet bus interface SK TU4-DEV-C TI 275271011 Setpoint converter, SK CU4-REL TI 275281202 DeviceNet bus interface SK TU4-DEV-M12 TI 275271006 IO extension SK CU4-IOE TI 275281252 DeviceNet bus interface SK TU4-DEV-M12-C

TI 275281106 IO extension SK TU4-IOE TI 275271019 Ethernet/IP bus interface SK CU4-EIP

TI 275281156 IO extension SK TU4-IOE-C TI 275281119 Ethernet/IP bus interface SK TU4-EIP

TI 275281206 IO extension SK TU4-IOE-M12 TI 275281169 Ethernet/IP bus interface SK TU4-EIP-C

TI 275281256 IO extension SK TU4-IOE-M12-C TI 275271018 POWERLINK bus interface SK CU4-POL

TI 275271108 24 V power supply SK CU4-24V-123 TI 275281118 POWERLINK bus interface SK TU4-POL

TI 275271109 24 V power supply SK CU4-24V-140 TI 275281168 POWERLINK bus interface SK TU4-POL-C

TI 275281108 24 V power supply SK TU4-24V-123 TI 275271015 PROFINET bus interface SK CU4-PNT

TI 275281109 24 V power supply SK TU4-24V-140 TI 275281115 PROFINET bus interface SK TU4-PNT

TI 275281158 24 V power supply SK TU4-24V-123-C TI 275281165 PROFINET bus interface SK TU4-PNT-C

TI 275281159 24 V power supply SK TU4-24V-123-C TI 275281122 PROFINET bus interface SK TU4-PNT-M12

TI 275271000 PROFIBUS DP bus interface SK CU4-PBR TI 275281172 PROFINET bus interface SK TU4-PNT-M12-C

TI 275281000 PROFIBUS DP bus interface SK TU4-PBR TI 275271017 EtherCAT bus interface SK CU4-ECT

TI 275281150 PROFIBUS DP bus interface SK TU4-PBR-C TI 275281117 EtherCAT bus interface SK TU4-ECT

TI 275281200 PROFIBUS DP bus interface SK TU4-PBR-M12 TI 275281167 EtherCAT bus interface SK TU4-ECT-C

TI 275281250 PROFIBUS DP bus interface SK TU4-PBR-M12-C

=== Ende der Liste für Textmar ke Inhalt ===

Page 70: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Pos: 17 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-IN I-1M / 275274517/Basisi nformati onen [SK TIE4-M 12- INI-1M ] @ 6\mod_1426609139039_388.docx @ 209150 @ 5555 @ 1

SK TIE4-M12-INI Part number: 275 274 517

Connection extension for initiators and actuators M12 control system connector

Scope of delivery

1 x M12 cable connector SK TIE4-M12-INI-1M

Field of use

The M12 cable connector has open cable ends (1m) and wire end sleeves. It is used to make a pluggable connection using normal commercial M12 round plug connectors. The connection is via a standard cable entry. It connects the technology option with the outgoing control signal cable at the output side.

Technical data

Version

Temperature range -25 … +80 °C Weight 35 g Contact insert Colour / Material

green / RAL 6018 Plastic

Cabel / cable sheath AWG 22 Black / PUR

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Separate cable entry Connection / Type Round plug connector

M12x1, Socket connector with flexible strand

Tightening torques M12x1 Socket

0.6 Nm

Contact set Contacts / Coding

5 pin, A - coded

Cable

Number of conductors / Cross section

5 x 0.34 mm2 Mech. Service life min. 100 plugging cycles

Wire strands / colours UL / (br, wt, bl, bk, gn/ye)

Operating voltage max. 125 V AC/DC

Length of wire strands 1000 mm Current rating 4 A Degree of fouling 3 Rated impulse voltage 1.5 kV

Technical Information / Datasheet SK TIE4-M12-INI-1M

Connection extension TI 275274517 V 1.0 1515 EN

Page 71: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INI-1M

Graphic illustration

Pos: 19 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-...- 1M] @ 6\mod_1428501543235_388.docx @ 211863 @ 5 @ 1

Installation / option locations

The cable connectors are to be mounted in a free fitting of the following series of devices via a suitable cable entry (not included).

Device series Recommended option location

Option locations

SK 135E SK 180E … SK 190E

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional 5R / 5L

Pos: 22 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 38 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-IN I-1M / 275274517/Anschl üsse [SK TIE4-M 12-IN I-1M] @ 6\mod_1426609135376_388.docx @ 209118 @ 55 @ 1

2 / 3 TI 275274517 - 1515

Page 72: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INI-1M

Connections

The open cable ends of the connection extension are connected to the terminal strip of the BUS connection unit (technology box), the customer interface or the control terminal strip in the frequency inverter or motor starter (see below).

Frequency inverter and motor starter

BUS connection unit SK TI4-TU-BUS (-C)

Technology box SK TU4-… (-M12) / (-C)

Customer interface SK CU4-…

Electrical connections

Connection extension

M12 Socket connector

SK TIE4-M12-INI-1M

Connection terminals***

SK 1x5E, SK 180E … SK 190E,

SK 2xxE

Technology box SK TU4-… (-M12) / (-C)

Connection unit SK TI4-TU-BUS (-C)

Customer interface

SK CU4-…

Initi

ator

s

Pin Colour Signal Contact Designation Contact Designation Contact Designation 1 brown +24 V 43/44 ** 24 V 11/12 24 V 44 +24 V 2 white DIN 1-4 21-24 DIN1-4 19/20/25/26 DIN 1-4 C1/C2 DIN 1-4 3 blue GND 40 GND 15/17 GND 40 GND Bus 4 black DIN 1-4 21-24 DIN 1-4 19/20/25/26 DIN 1-4 C1/C2 DIN 1-4 5 gn/ye nc.

Act

uato

rs*

Pin Colour Signal Contact Designation Contact Designation Contact Designation 1 brown +24 V 43 +24 V 44 24 V 31/32 24 V 2 white DOUT 1 1 DOUT 1 1 DOUT 1 33 DOUT 1 3 blue GND 40 GND 40 GND 35/36 0 V 4 black DOUT 2 3 DOUT 2 3 DOUT 2 34 DOUT 2 5 gn/ye nc.

* Only possible with series SK 2x0E devices ** 43: 24 V internal, SK 2x0E; 44: 24 V external, SK 2x5E *** For series SK1xxE devices: Replace existing pin fork terminals with 8 mm wire end sleeves, otherwise secure contact cannot be guaranteed

over the long term.

Contact assignments

5-pole Socket

connector A - coded

=== Ende der Liste für Textmar ke Inhalt ===

TI 275274517 - 1515 3 / 3

Page 73: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet SK TIE4-M12-SH-IN

Connection extension TI 275274519 V 1.0 1417 EN

Pos: 11 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-SH- IN / 275274519/Basisinfor mati onen [SK TIE4-M12-SH- IN] @ 17\mod_1491295194396_388.docx @ 2337836 @ 5555 @ 1

SK TIE4-M12-SH-IN Part number: 275 274 519

Connection extension "Safe Stop" input M12 control system plug connector

Scope of supply

1 x M12 Socket connector SK TIE4-M12-SH-IN

1 x Cover cap yellow As-delivered status with screwed-on connector cover

Field of use

The M12 Socket connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the control terminal strip with the outgoing control signal cable at the output side.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Color / Material

Grey / RAL 1021 Plastic

Connector cover Color / Material

Yellow / RAL 1021 Plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 *

Connection / Type Round plug connector

M12x1, adjustable Socket connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Socket connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact set Contacts / Coding

5 pin, A - coded

* Suitable assembly spanner commercially available (see Installation)

Page 74: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SH-IN

2 / 5 TI 275274519 - 1417

Cable

Number of conductors / Cross section

2 x 0.34 mm2 Mech. Service life Min. 100 plugging cycles

Wire strands / colors UL / (bl, sw) Operating voltage Max. 60 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Circuit diagram

Pos: 20 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing.

** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation

*** With optional SK TIE4-M20-M16 connection reduction

Pos: 23 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions.

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Page 75: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SH-IN

TI 275274519 - 1417 3 / 5

Installation steps for installation of the M12 Receptable connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17 open-ended spanner.

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptable connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

Page 76: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SH-IN

4 / 5 TI 275274519 - 1417

5. Align coding pin / coding groove vertically to 12 o'clock by rotating the front hexagonal nut.

Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner. Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is

properly screwed onto the M12 Receptable connector and tightened.

Pos: 24 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 25 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 36 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-SH- IN / 275274519/Anschlüsse [SK T IE4-M12-SH-IN ] @ 17\mod_1491295192943_388.docx @ 2337799 @ 55 @ 1

Page 77: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-SH-IN

TI 275274519 - 1417 5 / 5

Connections

The open cable ends of the connection extension / M12 Socket connector are connected to the terminal strip of the control terminals in the frequency inverter (see below).

Frequency inverter

NORDAC FLEX BUS connection unit SK TI4-TU-BUS (-C)

BUS technology box SK TU4-… (-M12) / (-C)

Electrical connections

Connection extension M12 Male connector

SK TIE4-M12-SH

Connection terminals NORDAC FLEX

SK 21xE, SK 23xE

Contact assignments

2-pole Male connector

A - coded

Pin Colour Signal Contact Designation 3 blue GND SH 88 GND SH

4 black +24 V SH 89 +24 V SH

Pos: 44 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 55 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-SH- IN / 275274519/Weiterführ ende D okumentationen [SK T IE4-M12-SH-IN ] @ 17\mod_1491295194905_388.docx @ 2337875 @ @ 1

Further documentation (www.nord.com)

Document Designation Document Designation

BU 0200 Frequency inverter manual SK 2xxE TI 275280500 Bus connection unit SK TI4-TU-BUS-C

BU 0230 Functional safety for SK 200E manual TI 275274510 Connection extension SK TIE4-M12-M16 TI 275280000 Bus connection unit SK TI4-TU-BUS TI 275274511 Connection reduction SK TIE4-M20-M16

=== Ende der Liste für Textmar ke Inhalt ===

Page 78: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Technical Information / Datasheet SK TIE4-M12-HTL-A0

Connection extension TI 275274522 V 1.0 1417 EN

Pos: 13 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-HTL-A0 / 275274522/Basisinfor mati onen [SK TIE4-M 12-HTL-A0] @ 17\mod_1490360552036_388.docx @ 2336466 @ 5555 @ 1

SK TIE4–M12–HTL–A0 Part number: 275 274 522

HTL rotary encoder output connection extension M12 system plug connector for synchronous motors

Scope of supply

1 x M12 Socket connector SK TIE4-M12-HTL-A0

1 x Cover cap black As-delivered status with screwed-on connector cover

Field of use

The 5-pole M12 Socket connector has open cable ends and wire end sleeves. It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the technology option with the outgoing HTL rotary encoder cable at the output side. This connection is mandatory for using of synchronous motors with encoder and M12 plug connector.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Color / Material

Black / RAL 9005 Plastic

Connector cover Color / Material

Black / RAL 9005 Plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 * Connection / Type

Round plug connector M12x1, adjustable Female connector with flexible strand M16x1.5, metric screw thread

Contacts / Coding 5 pin, A - coded

Tightening torques * M12x1 Socket connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm Contact set

Contacts / Coding 5 pin, A - coded

* Suitable assembly spanner commercially available (see Installation)

Page 79: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-HTL-A0

2 / 5 TI 275274522 - 1417

Cable

Number of conductors / Cross section

5 x 0.34 mm2 Mech. Service life Min. 100 plugging cycles

Wire strands / colors UL / (br, bl, bk, wt, gr) Operating voltage Max. 60 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω

Circuit diagram

Pos: 20 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontage- / Optionspl ätze [SK T IE4-M12-... ] @ 4\mod_1381740109805_388.docx @ 102041 @ 5 @ 1

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device series (see below).

Device series Recommended option location

Option locations

SK 135E * SK 180E * … SK 190E *

Housing SK 1xxE xxx-xxx-x (-C))

4R / 4L (incoming) 5R / 5L (outgoing)

SK 200E Frequency inverter

connecting unit SK TI4-x-2xx-x (-C)

4R / 4L (incoming) 5R / 5L (outgoing)

optional ** 6R / 6L, 7R / 7L, 8R / 8L

BUS technology box BUS connection unit SK TI4-TU-BUS (-C)

1 / 2 / 3 / 4

optional *** 5R / 5L

* The configuration capability of the respective Receptacle connector depends on its functionality with regard to the device series, e.g. the SK TIE-M12-SH Socket connector cannot be installed with the SK 1xxE housing.

** Size 1 – 3 with optional SK TIE4-M12-M16 connection extension, size 4 direct installation

*** With optional SK TIE4-M20-M16 connection reduction

Pos: 23 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/M ontageschrit te [SK T IE4-M12-.. .] @ 4\mod_1381747425031_388.docx @ 102300 @ @ 1

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 6) such that angled M12 round connectors can also be connected in a way that avoids collisions.

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the housing and in the frequency inverter connecting unit or the BUS connecting unit of an external technology box.

Page 80: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-HTL-A0

TI 275274522 - 1417 3 / 5

Installation steps for installation of the M12 Receptable connector

1. Remove M16 blind plug at the provided option location side (right / left) of the starter or frequency inverter housing or the connection unit.

Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17 open-ended spanner.

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection extension SK TIE4-M12-M16 The M12 Receptable connector can alternatively be installed with an optional M12-M16 connection extension. First screw the M12 Receptable connector directly into the connection extension and then fit into the M12 threaded opening in the connection unit. For more information see Optional accessories

Connection reduction SK TIE4-M20-M16

The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit. For more information see Optional accessories

Page 81: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-HTL-A0

4 / 5 TI 275274522 - 1417

5. Align coding pin / coding groove vertically to 12 o'clock by rotating the front hexagonal nut.

Socket connector Plug connector

6. Secure the front hexagonal nut with a 17 mm open-ended spanner. Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

7. Ensure that the M12 round plug connector or the cover cap is

properly screwed onto the M12 Receptable connector and tightened.

Pos: 24 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Achtung Korosion [SK TIE4-M 12-. ..] @ 4\mod_1381218166477_388.docx @ 101021 @ @ 1

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting. Pos: 25 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/Allgemei ngültig/Drehmoment- M ontag eschlüssel M 12 SW 17 [SK TIE4-M 12- ...] @ 4\mod_1381146245469_388.docx @ 100937 @ @ 1

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Pos: 38 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-HTL-A0 / 275274522/Anschlüsse [SK T IE4-M12-HTL- A0] @ 17\mod_1490360550936_388.docx @ 2336429 @ 55 @ 1

Page 82: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-HTL-A0

TI 275274522 - 1417 5 / 5

Connections

The open cable ends of the connection extension / M12 Socket connector are connected to the terminal strip of the control terminals in the frequency inverter (see below).

HTL rotary encoder Frequency inverter

NORDAC FLEX Frequency inverter

NORDAC LINK

Electrical connections

Connection extension M12 Socket connector SK TIE4-M12-HTL-A0

Connection terminals NORDAC FLEX

SK 2xxE

Connection terminals NORDAC LINK

Internally wired (factory fitted)

Contact assignments

5-pole Socket

connector A-coded

Pin Colour Signal Contact Designation Signal / Designation 1 brown 24 V 43/44* 24 V 24 V 2 white Track-B 23 DIN3 Track-B DIN3 3 blue GND 40 GND GND

4 black Track-A 22 DIN2 Track-A DIN2 5 grey Track-0 21 DIN1 Track-0 DIN1

* 43: 24 V internal, SK 2x0E; 44: 24 V external, SK 2x5E

Information Connection to digital inputs The HTL rotary encoder (Track-A and Track-B) can only be connected to DIN2 and DIN3 of the control terminal strip of the frequency inverter. The Track-0 must be connected to DIN1.

The digital inputs of the customer interfaces and technology assemblies cannot be used for rotary encoders. Pos: 44 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-. .. Optional es Zubehör/Opti onales Zubehör [SK TIE4-... ] @ 4\mod_1380629188419_388.docx @ 100572 @ 5 @ 1

Optional accessories

Information M12 / M20 screw openings

Conductive connection extensions made from brass SK TIE4-M12-M16 from M12 to M16 or connection reductions SK TIE4-M20-M16 from M20 to M16 are optionally available for installing the M12 connection extensions in an M12 or M20 screw opening. For more information, see further documentation.

Pos: 57 /Technische Informati onen/Anschl usser weiterungen [HAN, HQ,SK TIE]/Steckver binder [HAN , H Q, SK TIE]/M 12 Steuersignal- und Bussys tem- Steckverbi nder/SK TIE4-M 12-HTL-A0 / 275274522/Weiterführ ende D okumentationen [SK T IE4-M12-HTL- A0] @ 17\mod_1490360552663_388.docx @ 2336505 @ @ 1

Further documentation (www.nord.com)

Document Designation Document Designation

BU 0200 Frequency inverter manual SK 2xxE TI 275274511 Connection reduction SK TIE4-M20-M16 TI 275280000 Bus connection unit SK TI4-TU-BUS TI 18552090 Level adaptation PCB HTL - RS422

TI 275280500 Bus connection unit SK TI4-TU-BUS-C TI 18552095 Level adaptation PCB HTL - HTL A+/- B+/-

TI 275274510 Connection extension SK TIE4-M12-M16 === Ende der Liste für Textmar ke Inhalt ===

Page 83: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Getriebebau NORD GmbH & Co. KG Getriebebau-Nord-Straße 1 • 22941 Bargteheide, Germany • www.nord.com

Technical Information / Datasheet SK TIE4-M12-INS

Connection extension TI 275274531 V 1.0 1318 en

SK TIE4-M12-INS Part number: 275 274 531

Connection extension "Safe inputs” M12 control system plug connector

Scope of supply

1 x M12 Socket connector SK TIE4-M12-INS

1 x Cover cap yellow 1 x Insulating hose l = 240 mm, d = 5.0 mm As-delivered status with screwed-on connector cover

Field of use

The M12 Socket connector has open cable ends and wire end sleeves It is used to make a pluggable connection using normal commercial M12 round plug connectors. It connects the control terminal strip with the outgoing control signal cable at the output side.

Technical data

Version

Temperature range -30 … +90 °C Weight 23 g Contact insert Color / Material

Grey / RAL 1021 Plastic

Connector cover Color / Material

Yellow / RAL 1021 Plastic

Round plug connector Material

Metal, CuZn, nickel plated

Protection class (screwed)

IP67

Fastening Hexagonal nut M16x1.5 *

Connection / Type Round plug connector

M12x1, adjustable Socket connector with flexible strand M16x1.5, metric screw thread

Tightening torques * M12x1 Socket connector M16x1.5 Screw thread

0.6 Nm 1.5 Nm

Contact set Contacts / Coding

5 pin, A - coded

* Suitable assembly spanner commercially available (see Installation)

Page 84: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INS

2 / 4 TI 275274531 - 1318

Cable 1)

Number of conductors / Cross section

4 x 0.34 mm2 Mech. Service life Min. 100 plugging cycles

Wire strands 1) / colors UL / (bn, wh, bk, gy) Operating voltage Max. 60 V Length of wire strands 250 mm Current rating 4 A Degree of fouling 3 / 2 Insulation resistance ≥ 108 Ω 1) AWM Style 1007/1569 80/105 °C 300 V

Circuit diagram

Installation / option locations

The M12 Receptacle connector are intended for direct installation in a free M16 hole / threaded opening of the device (see below).

Device series Recommended option location

Option locations

BUS technology box (SAFE)

BUS connection unit (SAFE)

SK TI4-TU-SAFE (-C)

1 / 2 / 3 / 4

optional * 5R / 5L

* With optional SK TIE4-M20-M16 connection reduction

The installation position and mounting location (coding pin or coding groove on contact carrier) of the Socket connector is freely positionable and should be aligned (see installation step 7) such that angled M12 round connectors can also be connected in a way that avoids collisions.

The installation steps described in the following apply to the installation of the M12 Receptable connectors in the BUS connecting unit (SAFE) of an external PROFIsafe technology box.

Installation steps for installation of the M12 Receptable connector

1. Remove M16 blind plug from the provided option location hole (bottom) of the BUS connection unit.

2. Screw the middle hexagonal nut towards the front using a size 17 open-ended spanner.

Page 85: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INS

TI 275274531 - 1318 3 / 4

3. EMC Twist associated wire pairs together (e. g. bus system, power supply, etc.).

4. Pull insulating hose over connecting cables.

5. Screw M12 flanges component directly into the affected M12 threaded opening of the housing or connecting unit of the frequency inverter. Screw M12 Receptable connector into the relevant M16 threaded opening of the BUS connecting unit.

Alternative option locations

Connection reduction SK TIE4-M20-M16 The M12 Receptable connector can alternatively be installed with an optional M20-M16 connection reduction. First screw the M12 Receptable connector directly into the connection reduction and then fit into one of the side M12 threaded openings in the connection unit.

6. Align coding pin / coding groove vertically to 12 o'clock by rotating

the front hexagonal nut. Socket connector Plug connector

7. Secure the front hexagonal nut with a 17 mm open-ended spanner.

Screw the rear hexagonal nut to the connection unit or the starter or frequency inverter housing using a size 17 open-ended spanner or a special torque / installation wrench. Take the specified tightening torques into consideration, see technical data.

8. Ensure that the M12 round plug connector or the cover cap is

properly screwed onto the M12 Receptable connector and tightened.

NOTICE Corrosion

Pay attention to leaktightness during the installation of all components (assembly, connection extension etc.). It must be ensured that all components are correctly seated and the tightening torques are adhered to when doing this.

In order to ensure that protection class IP66 is complied with (concerns all devices with type key SK …-C), another pressure - leaktightness test must be performed when the assembly work has been completed.

Failure to do this will allow moisture to penetrate the device, which will result in the risk of corrosion and short circuiting.

Page 86: Technical Information / Datasheet · Technical Information / Datasheet . Connection extension SK TIE4-M12-PBR . 1.1 Extensive revision 2414 Bch TI 275274500 EN . version reason for

Connection extension – SK TIE4-M12-INS

4 / 4 TI 275274531 - 1318

Information Torque / assembly wrench

In order to provide a secure, sealed and vibration-proof connection, the M12 connection extensions, which are equipped with a hexagonal threaded ring (size 17), should be tightened with special torque / assembly wrenches. For professional installation NORD recommends the use of commercially available assembly tools (M12, size 17) with an adjustable, defined tightening torque (e.g. from Murrelektronik).

Electrical connections

Connection extension M12 Female connector

SK TIE4-M12-INS

Connection terminals SK TI4-TU-SAFE

Contact assignments

Female

connector A - coded

Pin Colour Signal Contact Designation 1 brown T1 25 Clock1

2 white S2 20 SI2

3 n.c.

4 black S1 19 SI1

5 grey T2 26 Clock2

Further documentation (www.nord.com)

Document Designation Document Designation

TI 275280300 Bus connection unit SK TI4-TU-SAFE TI 275274511 Connection reduction SK TIE4-M20-M16

TI 275280800 Bus connection unit SK TI4-TU-SAFE-C