official journal of the patent office · 2014-07-25 · the patent office journal 25/07/2014 29503...

The Patent Office Journal 25/07/2014

29502

पेटट कायालय शासक य जनल

OFFICIAL JOURNAL

OF THE PATENT OFFICE

िनगमन सं. 30/2014 शुबवारü दनांक: 25/07/2014 ISSUE NO. 30/2014 FRIDAY DATE: 25/07/2014

पेटट कायालय का एक ूकाशन PUBLICATION OF THE PATENT OFFICE


29503

INTRODUCTION

In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005

effective from 01st January 2005, the Official Journal of The Patent Office is required to be published under

the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings

on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on

this Official Journal and other information as required by the public should be addressed to the Controller

General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that

the content can be enriched.

(Chaitanya Prasad) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

25th JULY, 2014


29504

CONTENTS

SUBJECT PAGE NUMBER

JURISDICTION : 29505 – 29506

SPECIAL NOTICE : 29507 – 29508

EARLY PUBLICATION (DELHI) : 29509 – 29514

EARLY PUBLICATION (MUMBAI) : 29515 – 29529

EARLY PUBLICATION (CHENNAI) : 29530 – 29539

PUBLICATION AFTER 18 MONTHS (DELHI) : 29540 – 29739

PUBLICATION AFTER 18 MONTHS (MUMBAI) : 29740 – 29839

PUBLICATION AFTER 18 MONTHS (CHENNAI) : 29840 – 30039

PUBLICATION AFTER 18 MONTHS (KOLKATA) : 30040 – 30062

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE GRANT (DELHI)

: 30063 – 30066

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE GRANT (MUMBAI)

: 30067 – 30068

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE GRANT (CHENNAI)

: 30069 – 30071

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE GRANT (KOLKATA) : 30072 – 30073

INTRODUCTION TO DESIGN PUBLICATION : 30074

COPYRIGHT PUBLICATION

: 30075

THE DESIGNS ACT 2000 SECTION 30 DESIGN ASSIGNMENT

: 30076

REGISTRATION OF DESIGNS : 30077 - 30116


29505

THE PATENT OFFICE KOLKATA, 25/07/2014

Address of the Patent Offices/Jurisdictions The following are addresses of all the Patent Offices located at different places having their Territorial

Jurisdiction on a Zonal basis as shown below:- 1 Office of the Controller General of Patents,

Designs & Trade Marks, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill, Mumbai – 400 037

Phone: (91)(22) 24123311, Fax : (91)(22) 24123322 E-mail: [email protected]

4 The Patent Office, Government of India, Intellectual Property Rights Building, G.S.T. Road, Guindy, Chennai – 600 032. Phone: (91)(44) 2250 2081-84 Fax : (91)(44) 2250 2066 E-mail: [email protected]

The States of Andhra Pradesh, Karnataka, Kerala, Tamil Nadu and the Union Territories of Puducherry and Lakshadweep.

2 The Patent Office,

Government of India, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill,

Mumbai – 400 037 Phone: (91)(22) 24137701 Fax: (91)(22) 24130387

E-mail: [email protected] The States of Gujarat, Maharashtra, Madhya

Pradesh, Goa and Chhattisgarh and the Union Territories of Daman and Diu & Dadra and Nagar Haveli

3

The Patent Office, Government of India, Boudhik Sampada Bhavan, Plot No. 32., Sector-14, Dwarka, New Delhi – 110075 Phone: (91)(11) 2808 1921 – 25 Fax: (91)(11) 2808 1920 & 2808 1940 E.mail: [email protected]

The States of Haryana, Himachal Pradesh, Jammu and Kashmir, Punjab, Rajasthan, Uttar Pradesh, Uttaranchal, Delhi and the Union Territory of Chandigarh.

5

The Patent Office (Head Office), Government of India, Boudhik Sampada Bhavan, CP-2, Sector –V, Salt Lake City, Kolkata- 700 091 Phone: (91)(33) 2367 1943/44/45/46/87 Fax: (91)(33) 2367 1988 E-Mail: [email protected]

Rest of India

Website: www.ipindia.nic.in www.patentoffice.nic.in All applications, notices, statements or other documents or any fees required by the Patents Act, 1970 and The Patents (Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received only at the appropriate offices of the Patent Office. Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of Patents drawn on a scheduled Bank at the place where the appropriate office is situated.


29506

पेटट कायालय कोलकाता, दनांक 25/07/2014

कायालय के ेऽािधकार के पतेê विभ न जगह पर ःथत पेटट कायालय के पते आंचिलक आधार पर दिशत उनके ूादेिशक अिधकार ेऽ के

साथ नीचे दए गए है:- 1 कायालय : महािनयंऽक, एकःव, अिभक प

तथा यापार िचहन, एंटोप हल डाकघर के समीप, एस. एम. रोड, एंटोप हल, मु बई- 400 037, भारत, फोन: (91) (22) 24123311 फ़ै स: (91) (22) 24123322 ई. मेल: [email protected]

4 पेटट कायालय, भारत सरकार इंटेले चुअल ूॉपट राइ स ब डंग, इंड ःशयल इःटेट एसआईड सीओ आरएमड गोडाउन ए रया एडजसे ट टु ईगल लाःक, जी. एस. ट . रोड, गाय ड चे नई - 600 032. फोन: (91)(44) 2250 2081-84 फ़ै स: (91)(44) 2250-2066 ई. मेल: [email protected]

आ ी ूदेश, कनाटक, केरल, तिमलनाडु तथा पुडुचेर रा य ेऽ एव ंसंघ शािसत ेऽ, ल द प

2 पेटट कायालय, भारत सरकार बौ क संपदा भवन, एंटोप हल डाकघर के समीप, एस. एम. रोड, एंटोप हल, मु बई- 400 037, फोन: (91) (22) 24137701 फ़ै स: (91) (22) 24130387 ई. मेल: [email protected]

�गुजरात, महारा , म य ूदेश, गोवा तथा छ ीसगढ़ रा य ेऽ एव ंसंघ शािसत ेऽ, दमन तथा द व, दादर और नगर हवेली.

3 पेटट कायालय, भारत सरकार बौ क संपदा भवन, लॉट स.ं 32, से टर- 14, ारका, नई द ली- 110 075. फोन: (91)(11) 2808 1921-25 फ़ै स: (91)(11) 2808 1920, 2808 1940 ई. मेल: [email protected] ह रयाणा, हमाचल ूदेश, ज मू तथा कँमीर, पंजाब,राजःथान, उ र ूदेश, द ली तथा उ रांचल रा य ेऽ , एवं संघ शािसत ेऽ चंड गढ़

5 पेटट कायालय, भारत सरकार कोलकाता, (ूधान कायालय) बौ क संपदा भवन, सीपी-2, से टर- V, सा ट लेक िसट , कोलकाता-700 091, भारत. फोन: (91)(33) 2367 1943/44/45/46/87 फ़ै स:/Fax: (91)(33) 2367 1988 ई. मेल: [email protected]

भारत का अवशेष ेऽ

वेबसाइट: http://www.ipindia.nic.in www.patentoffice.nic.in

पेटट अिधिनयम, 1970 तथा पेटट (सशंोधन) अिधिनयम, 2005 अथवा पेटट (सशंोधन) िनयम, 2006 ारा वांिछत सभी आवेदन, सूचनाए, ववरण या अ य दःतावेज़ या कोई शु क पेटट कायालय के केवल उपयु कायालय म ःवीकृत ह गे। शु क: शु क या तो नगद प म या Controller of Patents के नाम म देय बक सा ट या चेक के ारा भेजी जा सकती है जो उसी ःथान के कसी अनुसूिचत बक म ूद हो जहाँ उपयु कायालय ःथत है ।


29507

SPECIAL NOTICE

18 Months publication as required under Section 11A of the Patents Act, 1970

as amended by the Patents (Amendment) Act, 2005.

Notice is hereby given that any person at any time before the grant of Patent may give representation by way of

opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under

section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules,

2006.

Notice is also given that if any interested person requests for copies of the complete specification, drawing and

abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as

per the jurisdiction on payment of prescribed fees of Rs.4/- per page. If any further details are required to be

obtained, the same can be provided by the respective Patent Offices on request.

(Chaitanya Prasad) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS


29508

SPECIAL NOTICE

Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005 and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III,

Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published

containing all the activities of The Patent Office such as publication of all the patent applications after 18th

months , grant of patents & all other information in respect of the proceedings as required under the provisions

of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday.

The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are

discontinued from 01/01/2009.

SPECIAL NOTICE

Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.

However, if duplication of publication of any application is found, then earlier date of publication will be taken

for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months

from the date of second publication, provided that there is there is no third party representation.


29509

Early Publication: The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule 24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents (Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006: (12) PATENT APPLICATION PUBLICATION (21) Application No.1278/DEL/2014 A (19) INDIA (22) Date of filing of Application :13/05/2014 (43) Publication Date : 25/07/2014

(54) Title of the invention : MICRO RECYCLING MACHINE OF WASTE PLASTICS (51) International classification :C10G1/10 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA

(87) International Publication No : NA (61) Patent of Addition to Application Number Filing Date

:NA :NA

(62) Divisional to Application Number Filing Date

:NA :NA

(71)Name of Applicant : 1)NIVESH KUMAR Address of Applicant :C-40, SAURABH VIHAR,BADARPUR, NEW DELHI India (72)Name of Inventor : 1)NIVESH KUMAR

(57) Abstract : This power functioning equipment is extremely small and economical. It heats immediately and starts working and within minutes converts the waste plastic of the house into a useful thing. It is small in size and can be taken anywhere. The method to use it is very simple and it can be repaired easily on being out of order. If it is used by everybody then plastic will be produced in large quantities which would be utilized for making various objects or in construction of roads. No. of Pages : 9 No. of Claims : 2


29510

(12) PATENT APPLICATION PUBLICATION (21) Application No.1376/DEL/2014 A (19) INDIA (22) Date of filing of Application :23/05/2014 (43) Publication Date : 25/07/2014

(54) Title of the invention : DESIGN OF SHELL-SHELL-TUBE TYPE HEAT EXCHANGER (51) International classification :F28F9/02 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)PARAG JOSHI Address of Applicant :C/O UMESH JOSHI, VPO-DANDI, DISTT.-DUNGARPUR (RAJ)-314036 Rajasthan India 2)SARITA KALLA (72)Name of Inventor : 1)PARAG JOSHI

(57) Abstract : IT IS COMPLETELY A NEW IDEA IN THE DESIGN OF SHELL AND TUBE TYPE HEAT EXCHANGER. THIS THEORETICAL DESIGN GIVES A WAY TO DESIGN THE COMPLETELY DIFFERENT TYPE OF HEAT EXCHANGER NAMED AS SHELL-SHELL-TUBE TYPE HEAT EXCHANGER (SSTHE). THIS DESIGN INCLUDES THE THERMAL AND MECHANICAL ASPECTS FOR THE DESIGNING OF SHELL-SHELL-TUBE TYPE HEAT EXCHANGER. THE SSTHE CONSIST OF A MAIN SHELL IN WHICH A NUMBER OF OTHER SMALL SHELLS ARE INTRODUCED AND THESE INNER SHELLS MHER CONTAIN THE TUBES. THE ONE FLUID IS INTRODUCED IN THE INNER SHELLS AND ANOTHER FLUID IS DIVIDED INTO THE TWO STREAMS, ONE IS FLOWING THROUGH THE OUTER SHELL AND ANOTHER THROUGH THE TUBES OF THE INNER SHELLS. THIS TYPE OF HEAT EXCHANGER IS ALSO KNOWN AS STTHE BECAUSE THE INNER SHELLS ACT AS THE TUBES FOR THE OUTER SHELL. HEAT EXCHANGE PROCESS IS THE BACKBONE OF EACH PROCESS INDUSTRY AND FOR THAT THEY USE NUMBER OF EXCHANGER IN SERIES WHICH HAVE HIGH CAPITAL AS WELL AS OPERATING COST AND THEY ALSO REQUIRES HIGH GROUND AREA TO INSTALL. TO OVERCOME THIS INDUSTRIAL PROBLEM WE INTRODUCE THE CONCEPT OF SSTHE. THE SSTHE CONTAINS THE ADDITIONAL HEAT EXCHANGE AREA BY THE INTRODUCTION OF SUB-SHELL/INNER-SHELLS WITHIN THE SAME SHELL AND TUBE HEAT EXCHANGER WHICH INCREASES THE OUTLET PRODUCT TEMPERATURE. SO THE NUMBER OF SERIES OF THE SHELL AND TUBE HEAT EXCHANGER CAN BE SUBSTITUTES BY THE SERIES OF LESS NUMBER OF SSTHE. THE TOTAL OPERATING COST FOR THE SERIES OF SSTHE IS LESS AS COMPARED TO SERIES OF SHELL AND TUBE HEAT EXCHANGER AS WELL AS THERE IS A DECREASE IN TOTAL CAPITAL COST 02 THE SERIES OF THE SSTHE AS COMPARED TO SHELL AND TUBE HEAT EXCHANGER SERIES. SO THE AIM OF THE DESIGNING OF SSTHE DESCRIBES THE ADDITION OF SUB-SHELL TO THE PREDESIGNED SHELL AND TUBE HEAT EXCHANGER TO INCREASE THE HEAT EXCHANGE AREA WITHOUT ANY DECREASE IN NUMBER OF TUBES. THE CAPITAL COST OF THE SYSTEM IS HIGHER THAN ONE SHELL AND TUBE HEAT EXCHANGER BUT IF THE SSTHE IS USED IN SERIES FOR HIGH HEAT TRANSFER THEY REQUIRES LESSER NUMBER OF SSTHE AS COMPARED TO SHELL AND TUBE HEAT EXCHANGER. THE ADVANTAGE OF THE SSTHE IS THE ADDITIONAL HEAT EXCHANGE AREA BY THE INTRODUCTION OF THE INNER SHELL AS WELL AS THE DISTRIBUTION OF ONE FLUID STREAM LEADS TO INCREASE THE OVERALL HEAT TRANSFER COEFFICIENT. BOTH THE FACTOR WILL GIVE THE HIGHER PRODUCT TEMPERATURE WITHIN THE SAME LENGTH THAT OF THE INDUSTRIAL SHELL AND TUBE HEAT EXCHANGER. AN ANOTHER ADVANTAGE OF THIS IS THAT IT HAS LOW FOULING AS COMPARED TO SHELL AND TUBE HEAT EXCHANGER DUE TO INCREASE IN AREA. No. of Pages : 22 No. of Claims : 9


29511


(54) Title of the invention : ENHANCED ANTIRETROVIRAL HIV THERAPIES AND VACCINES USING IMMUNE-MODULATORS AND IMMUNE-ENHANCERS. (51) International classification :A61K38/16 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)DR. ANIL KUMAR CHAWLA Address of Applicant :M-46, DELTA-3, GREATER NOIDA-201308, UP, INDIA 2)MS. CHANDRANI DAS (72)Name of Inventor : 1)DR. ANIL KUMAR CHAWLA 2)MS CHANDRANI DAS

(57) Abstract : THE PRESENT INVENTION RELATES TO CURE OR TREATMENT OR MAINTENANCE OR PREVENTION THERAPIES FOR NORMAL OR DRUG RESISTANCE HIV INFECTIONS WITH OR WITHOUT CURRENTLY AVAILABLE ANTIRETROVIRAL CHEMOTHERAPIES. THE BIOLOGICAL MOLECULES OR SYNTHETIC MOLECULES ARE REFERRED TO IN THE PRESENT INVENTION ARE EITHER A MIXTURE OF POLYCLONAL SERUM, MONOCLONAL ANTIBODIES, CHIMERIC MONOCLONAL ANTIBODIES. THESE MOLECULES CAN BE COMPLETE MOLECULES OR A PORTION OF THEM.THESE MOLECULES AS A MINIMUM IMMUNE-MODULATE THE IMMUNE SYSTEM AND INCREASE EFFECT OF CURRENTLY AVAILABLE RETI-OVIRAL THERAPY BY REDUCING OR ELIMINATING THE VIRAL RESISTANCE TO THERAPY OR FASTER VIRUS ELIMINATION. THESE MIXTURES AND FORMULATION CAN ULTIMATELY LEAD TO CURE OR TREATMENT AND EVEN PREVENTING AN INFECTION FROM HIV. INVENTION ALSO RELATES TO THE FORMULATION & COMPOSITION OF THE ANTIRETROVIRAL THERAPIES BOOSTERS AND THEIR MODE OF ACTION AND ROUTE OF ADMINISTRATION. No. of Pages : 15 No. of Claims : 18


29512


(54) Title of the invention : SYNTHESIS OF GLYCYRRHETINIC ACID-CURCUMIN ESTER (51) International classification :C07D405/14 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)SHARAD VISHT Address of Applicant :ASSISTANT PROFESSOR, DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY, MEERUT INSTITUTE OF ENGINEERING AND TECHNOLOGY, NH-58, BAGHPAT BYPASS, MEERUT- 250 005. Uttar Pradesh India (72)Name of Inventor : 1)SHARAD VISHT

(57) Abstract : A NOVEL COMPOUND GLYCYRRHETINIC ACID CURCUMIN ESTER [COMPOUND (I)] WAS SYNTHESIZED FOR THE TREATMENT OF CANCER. CYTOTOXIC ASSAY OF COMPOUND (I) WAS PERFORMED ON HUMAN COLON CARCINOMA (HT-29) CELL LINE IN FOUR CONCENTRATIONS (10-7M,10-6,M,10-5M,10-4M,)IN TRIPLICATE AND AVERAGE VALUES WERE CALCULATED. GI50 OF COMPOUND (I) ON HT-29 COLON CANCER CELL LINES WAS FOUND TO BE 47.5 MM. THE GI50 VALUE WAS FOUND TO BE IN FOLLOWING ORDER: ADRIYAMYCIN


29513


(54) Title of the invention : FRAMEWORK TO TEST AN OBJECT ORIENTED SOFTWARE FAULT TOLERANCE (51) International classification :G06F11/263 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)DR. RAMESH KUMAR CHOUDHARY Address of Applicant :C1/24, SECTOR-4, ELDECO, NEAR TOLL PLAZA, PANIPAT-132103 Haryana India (72)Name of Inventor : 1)DR. RAMESH KUMAR CHOUDHARY 2)DR. RAEES AHMAD KHAN

(57) Abstract : TAKING INTO ACCOUNT THE NEED AND SIGNIFICANCE OF A GUIDELINE FOR TESTING SOFTWARE FAULT TOLERANCE TECHNIQUES, A PRESCRIPTIVE FRAMEWORK FTFT IS PROPOSED WHICH IS HIGHLY IMPLEMENTABLE AND PRESCRIPTIVE IN NATURE. THE DEVELOPMENT PROCESS IS COMPRISED OF SIX STEPS TOGETHER. THE FIRST STEP STARTS WITH THE CONCEPTUALIZATION. FRAMEWORK DESIGN AND DEVELOPMENT STEP IS ACTUALLY PRODUCING THE FRAMEWORK TO BE USED TO TESTING SOFTWARE FAULT TOLERANCE. PRETRYOUT IS TREATED AS AN IMPORTANT STEP, AND HAS BEEN PUT-FORTH AS A THIRD STEP, FOLLOWED BY EXPERT REVIEW AND REVISION. THE COMMENTS/SUGGESTIONS OBTAINED FROM THE EXPERTS AND ANALYZED AND ACCORDINGLY CHANGES ARE MADE, FOLLOWED BY TRYOUT WITH BIG SAMPLE OF DATA IN FOURTH STEP. THE FRAMEWORK IS FINALIZED IN FIFTH STEP. IN ABSENCE OF ANY FRAMEWORK OF SUCH KIND, THE PROPOSED FRAMEWORK IS NOVEL IN NATURE AND IS SUCCESSFULLY USED TO TEST SOFTWARE FAULT TOLERANCE TECHNIQUE BEFORE IMPLEMENTING INTO APPLICATIONS. AS A RESULT, COMPLEXITY OF IMPLEMENTATION OF SFTT IS REDUCED BY NOTICEABLE FACTOR. THE FRAMEWORK PROPOSED ALSO IMPROVES EFFICIENCY OF SFTT. ON IMPLEMENTING THE FRAMEWORK, DEPENDABILITY IS ENHANCED BY PREDICTING THE OCCURRENCE OF FAILURES AND ESTIMATING FAULTS. No. of Pages : 4 No. of Claims : 1


29514

(12) PATENT APPLICATION PUBLICATION (21) Application No.5236/DELNP/2014 A (19) INDIA (22) Date of filing of Application :25/06/2014 (43) Publication Date : 25/07/2014

(54) Title of the invention : LOW NOISE TURBINE FOR GEARED TURBOFAN ENGINE (51) International classification :F01D1/04,G06F17/50 (31) Priority Document No :61/592643 (32) Priority Date :31/01/2012 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2013/020724 :09/01/2013

(87) International Publication No :WO 2013/147974 (61) Patent of Addition to Application Number Filing Date

:NA :NA


:NA :NA

(71)Name of Applicant : 1)UNITED TECHNOLOGIES CORPORATION Address of Applicant :One Financial Plaza Hartford Connecticut 06101 U.S.A. 2)MTU AERO ENGINES AG (72)Name of Inventor : 1)MORIN Bruce L. 2)KORTE Detlef

(57) Abstract : A gas turbine engine is utilized in combination with a gear reduction to reduce the speed of a fan relative to a low pressure turbine speed. The gas turbine engine is designed such that a blade count in the low pressure turbine multiplied by the speed of the low pressure turbine will result in operational noise that is above a sensitive range for human hearing. A method and turbine module are also disclosed. No. of Pages : 14 No. of Claims : 20


29515

(12) PATENT APPLICATION PUBLICATION (21) Application No.2142/MUM/2014 A (19) INDIA (22) Date of filing of Application :02/07/2014 (43) Publication Date : 25/07/2014

(54) Title of the invention : DENTAL DEVICE WITH SUSPENSION ELEMENT

(51) International classification :A61C8/00, A61C19/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)DR. MARVIN ANSELMO COTA Address of Applicant :VILLA 30, GULMOHAR PARK, CHICALIM, GOA-403711. India (72)Name of Inventor : 1)DR. MARVIN ANSELMO COTA

(57) Abstract : The dental device having screw less implant-abutment interlocking with suspension element is disclosed herein above. The suspension element provides minimal bone loss and increase the implant life by distributing physiological forces acting directly on bones around the implant. It also lessens rigidity in the teeth movements. The dental device consists of implant (5), abutment (1) and the suspension element (4). The implant and abutment both are having locking components, slots (11,11) and fingers (2, 2) which interconnect with each other with the help of tightening screw. The suspension element sited in the cavity made in implant (5) and abutment (1). No. of Pages : 17 No. of Claims : 11


29516


(54) Title of the invention : 0% FUEL COST -AC-DC POWER GENERATING TECHNOLOGY.

(51) International classification

:H02M 3/158, H02J 1/10, H02J 1/12

(31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)MR. SHARMADURAI PONPANDY Address of Applicant :SHARMADURAI PLOT 11, S/3 SHIVSENA SHAKHA NO. 131, SHIVAJI NAGAR, GOVANDI (WEST), MUMBAI-400 043, MAHARASHTRA, INDIA. (72)Name of Inventor : 1)MR. SHARMADURAI PONPANDY

(57) Abstract : This disclosure relates to it is recycling the electric power and generating the power from the movement of electric power the transformer generates free cost DC power and the power saving motor generate good RPM. No. of Pages : 10 No. of Claims : 4


29517


(54) Title of the invention : FABRICATED PUMP HOUSING (51) International classification :F04D29/42 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)SHAKTI PUMPS (INDIA) LIMITED Address of Applicant :401, 402 & 413, INDUSTRIAL AREA, SECTOR-3, PITHAMPUR DIST-DHAR, (M.P.) PIN-454774, INDIA (72)Name of Inventor : 1)DINESH PATIDAR

(57) Abstract : fabricated pump housing of stainless steel grade material which is used in place of casted pump housing, which is comparatively less in weight, better performance ( energy efficient) and has better life (corrosion resistant} as compared to casting. This fabricated pump housing is designed in nine different parts that is Suction flange (1), Suction Pipe (2), Side Support (3), Upper volute (4), Center Volute (5) , Lower Volute (6) , Top Support (7) , Delivery Flange (8) and Bottom Support (9) . Latter on all the nine parts are fabricated to make pump housing assembly. The Lower Volute is then mounted on Motor to complete the Open Well Pump Set / Mono Block pump set Due to less weight of pump housing its assembly is also easy and fast which increases the productivity. No. of Pages : 10 No. of Claims : 4


29518


(54) Title of the invention : AUTOMATIZED OUTDOOR PARASOL

(51) International classification :A45B3/00, A45B19/02,A45B17/00(31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)CHETAN DOSHI Address of Applicant :257, SANJAY BUILDING NO. 5-B, MITTAL INDUSTRIAL ESTATE, ANDHERI-KURLA ROAD, ANDHERI (EAST), MUMBAI 400 059, MAHARASHTRA, INDIA. (72)Name of Inventor : 1)CHETAN DOSHI

(57) Abstract : An outdoor parasol (100) is disclosed. The parasol (100) comprises a central column (102), an actuation mechanism (116) placed inside the central column (102), a supporting shaft (120) attached to the top of the central column (102), radially disposed ribs (104), canopy (110) mounted on the ribs (104), struts (106) for connecting the ribs (104) to the top of the central column (102), sub-struts (112) connecting the ribs (104) to the supporting shaft (120); wherein, when expanded an inner tube slidably ensconced in an outer tube of the actuation mechanism (116) moves up to associate with the supporting shaft (120) splaying the sub-struts (112) thereby opening the struts (106) to expand the ribs (104) defining a bird-flight structure, and when collapsed the inner tube moves down to disassociate with the supporting shaft (120) contracting the sub-struts (112). No. of Pages : 21 No. of Claims : 10


29519


(54) Title of the invention : MANAGING GRAIN STORAGE

(51) International classification :G01N1/00, G08B23/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)DR. SANJEEV J. WAGH Address of Applicant :RH20, GANGA VILLAGE, HANDEWADI ROAD, HADAPSAR, PUNE-411028, MAHARASHTRA, INDIA. 2)MRS. MANISHA S. BHENDE (72)Name of Inventor : 1)DR. SANJEEV J. WAGH 2)MRS. MANISHA S. BHENDE

(57) Abstract : The present subject matter discloses a system and a method for managing grain storage. The physical parameters like temperature and humidity, related to the grain storage are monitored using wireless sensor network. The wireless sensor network is utilized efficiently by employing a topology control technique, thereby improving energy consumption by the sensors and increasing network lifetime. The system detects alert conditions related to the grain storage and takes a control action for improving the physical parameters during an alert situation. The system may also intimate user(s) of the alert condition and the control action implemented by the system. No. of Pages : 15 No. of Claims : 7


29520


(54) Title of the invention : SYSTEM AND METHOD FOR PROVIDING MUSICAL NOTATIONS

(51) International classification :G09B15/02, G09B15/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)PRANJALI ATUL DESHPANDE Address of Applicant :C-403, GOLDENPETALS, NEAR TREE HOUSE SCHOOL, DUDHANENAGAR, KARVENAGAR, PUNE-52 Maharashtra India 2)PRAVIN S. GAME (72)Name of Inventor : 1)PRANJALI ATUL DESHPANDE 2)PRAVIN S. GAME

(57) Abstract : Disclosed is a system and method for providing a musical notation for a natural language based information. The system comprises a communication terminal, a first database server and a second database server. The system and the method identify a meter/vrutta in a Sanskrit Shloka and provide a corresponding musical notation. The system and the method act as a guide for users who are unaware of a construct and a singing pattern of the Sanskrit Shloka to sing the Sanskrit Shloka. No. of Pages : 23 No. of Claims : 6


29521


(54) Title of the invention : A SELF REGULATED AUTO-ACTUATED HIGHLY EFFICIENT IMPROVED ROTARY VALVE MECHANISM FOR CONCRETE PUMP

(51) International classification :F04B9/117, F04B15/02, F04B11/00


:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)AMIT ARUN GOKHALE Address of Applicant :C/O MR. J.D. APTE, BUNGALOW NO. 19, VAIKUNTH BUNGALOWS, SINDHI SOCIETY, NR. VIVEKANANDA POLYTECHNIC, CHEMBUR MUMBAI-400071 Maharashtra India 2)ANAND ARUN GOKHALE (72)Name of Inventor : 1)AMIT ARUN GOKHALE 2)ANAND ARUN GOKHALE

(57) Abstract : The Said Self regulated auto-actuated highly efficient, improved rotary concrete valve mechanism for concrete pump as described in this application is a improved rotary valve mechanism for concrete pump having a valve body housing in which a cylindrical rotary valve with a cut section is made to rotate to operate the three ports namely the intake port, the suction port & the delivery port wherein the suction port & delivery port are on the same axis and the valve body centre is off-set with this axis wherein this off-set distance determines the thickness of the rotating section of the rotary valve. Due to the off-set centre of the valve body, and the cut section of the rotary valve, there are comparatively very large overlapped areas on both sides of the closed port which helps in effective sealing under high delivery pressures. Also the said cut section creates a cutting edge on both sides. However a single cutting edge passes through the flow of concrete in one single valve operation unlike the prior arts wherein two edges pass through the concrete flow in one single operation due to the through hole used since 1935. The said valve is also provided with replaceable cutting edges, which can be replaced when worn out. No. of Pages : 32 No. of Claims : 9


29522


(54) Title of the invention : AN ALTRATION IN TELEVISION AND ITS REMOTE CONTROL TO MAKE EASY SEARCH OF REMOTE CONTROL

(51) International classification :G08C19/28, G07C9/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)DR. HARISH UMASHANKAR TIWARI Address of Applicant :PIMPRI CHINCHWAD COLLEGE OF ENGINEERING, SECTOR 26, PRADHIKARAN NIGDI, PUNE-411 044, MAHARASHTRA STATE, INDIA. (72)Name of Inventor : 1)DR. HARISH UMASHANKAR TIWARI

(57) Abstract : A system for searching a misplaced remote control of a Television or other electronic gadgets, the said system uses a combination of RF (radio frequency) transmitter and a receiver, the said combination is known as RF Module Pair(TX+RX), the said transmitter is required to be installed in Television, the said reviver is to be installed in remote control, the said transmitter installed in the TV is having a switch which will be operated when remote is to be searched, the receiver installed in the remote control have a beeper which beeps after receiving signal from transmitter, the pair of receiver and transmitter is a RF module pair(TX+RX). The beeping sound of receiver helps in locating the misplaced remote control The overall cost of installing this system is very small(Rs.300). No. of Pages : 9 No. of Claims : 5


29523


(54) Title of the invention : APRO BOOM PETBRICK

(51) International classification :C04B35/622,C08J5/00, C04B28/02


:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)MR. ABHIJEET R. SIRKAR Address of Applicant :APRO GREEN TECH-702, SEA SHELL, GREEN FIELDS ESTATE, OPP. JUHU POST OFFICE, A. B. NAIR ROAD, MUMBAI - 400049 Maharashtra India (72)Name of Inventor : 1)MR. ABHIJEET R. SIRKAR

(57) Abstract : Disclosed is a plastic bottle brick for building civil structures. The plastic bottle brick comprises a plastic bottle being filled vvith waste material. The waste material includes fly ash, construction waste, waste plastic, waste paper pulp, waste thermocol, waste fiberglass, dry waste except organic waste, recycled rubber waste, husks mill waste, paper waste, cloth waste or any combination thereof. Also disclosed is a method of building civil structures using a plastic bottle brick as disclosed herein above. The method comprising steps of a. preparing a base layer using mortar; b, placing the plastic bottle bricks on the base layer to prepare first layer; c. tying plastic bottles with each other using nylon string from bottom of the plastic bottles; d. filling gap between the plastic bottle bricks with the mortar; e. placing the plastic bottle bricks over the first layer; f. tying plastic bottles placed in step (e) with each other using nylon string from bottom of the plastic bottles; g. filling gap between the plastic bottle bricks of step (f) vvith the mortar; h. repeat steps (e), (f) and (g) as per the design of the civil structure; and i. tying the plastic bottles with each other using nylon string from front of the plastic bottles. The mortar is made of cement, band, clay, fly ash, lime, rubber crumb or combination thereof. No. of Pages : 19 No. of Claims : 16


29524


(54) Title of the invention : LIPOSOMAL COMPOSITION FOR THE TREATMENT OF LEISHMANIASIS AND METHOD FOR MANUFACTURING THEREOF

(51) International classification :A61K9/127,A61K31/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)DR. SHAILZA SINGH Address of Applicant :NATIONAL CENTER FOR CELL SCIENCE, PUNE UNIVERSITY CAMPUS, GANESHKHIND, PUNE-411 007, MAHARASHTRA, INDIA. (72)Name of Inventor : 1)DR. SHAILZA SINGH 2)MISS. VINEETHA MANDLIK

(57) Abstract : In one of the aspect of the invention, a set of novel inhibitors have been indentified for the Inositol phosphorylceramide synthase (IPCS) protein. These were entrapped in the liposome for the purpose of delivery to the targeted area. Molecular dynamics simulation of the docked complexes has revealed the binding modes of the compounds with the Inositol phosphorylceramide synthase (IPCS) protein. These of selected by in-silico approaches have been studied for their efficacy and cytotoxicity in-vitro, these inhibitors includes C1:(3-(l,3-Benzodioxol-5-yl)-2oxo-2H-chromen-6-yl-acetate); C2: (6-Amino-3-(l,3-benzodioxol-5-yl)-2H-chromen-2-one); C3:3-(l,3-Benzodioxol-5-yl)-6-{[(lE)-2-furylmethylenelamino}-2H-chromen-2-one; C4:3-(l;3-Benzodioxol-5-yl)-6-{[(lE)-lH-pyrrol-2-ylmethylene]amino}-2H-chromene-2-one; C5: (3-(l,3-Benzodioxol-5-yl)-6-nitro-2H-chromen-2-one; In one the most important aspect of the invention an inhibitor for control Inositol phosphorylceramide synthase (IPCS) is selected is C2: (6-Amino-3-(l,3-benzodioxol-5-yl)-2H-chromen-2-one); In an another important aspect of the invention it is provided that the inhibitor for the Inositol phosphorylceramide synthase (IPCS) is selected is C2: (6-Amino-3-(l,3-benzodioxol-5-yl)-2H-chromen-2-one) as a free drug. Liposomal formulation of C2 was prepared to improve the efficacy, the liposomal formulation is provided. In an another aspect of the invention, a method for manufacturing the liposomal formulation is provided which is manufactured as follows: Phospholipid, drug and phospholipid derivative were dissolved solvent. Solvent was evaporated into a thin and uniform lipid-drug film with the help of a rotary evaporator. After thorough drying with vacuum pump lipid-drug, film was hydrated with H20 for 2 h elevated temperature. It was passed though Sephadex G-25 column and extruded through 200 nm Whatmann polycarbonate membrane at elevated temperature to obtain sub 200 nm particles. Liposomes were stored at 4oC for further use. The size of the liposome was measured using Malvern Zetasizer. The size of the liposome ranged between 90-400nm with the average size being 182nm. (Figure 2) The absorbance of the drug entrapped liposome was also measured to estimate the concentration of the drug trapped in the liposome. No. of Pages : 15 No. of Claims : 9


29525


(54) Title of the invention : HIGH FLOW MULTI BATH SYSTEM

(51) International classification :F24H1/00, F24H 1/18 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)HEMANTKUMAR N. SHAH Address of Applicant :285, PARK VIEW, OPP. NAPOO GARDEN, B.A.K. MARG, MUMBAI-400 019 Maharashtra India(72)Name of Inventor : 1)HEMANTKUMAR N. SHAH

(57) Abstract : The invention relates to High Flow Multi Bath System consisting multipurpose diverter (1) exceeding 7, 8 or 10 operation comprising one diverting mixer cartridge (10) for mixing cold and hot water by means of hot line (3)/ cold line water (8) connecting controlled by ceramic cartridge hand operated for water mixing (9) purpose; one diverting cartridge (2) situated below the mixing chamber for diverting the water to shower mode or tap mode; said shower mode pumped the water into water chamber situated above the mixing chamber for providing Rain shower mode (3) jet shower mode (4) over head shower mode (5) and hand shower mode (6) operation by individual connection. No. of Pages : 10 No. of Claims : 1


29526


(54) Title of the invention : A PRODUCT AS A FUNGICIDE AND BACTERICIDE FOR AGRICULTURE CROP ESPECIALLY CUMIN CROP (51) International classification :A01N35/02 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)DR. CHETAN BALAR Address of Applicant :12, ESHWAR NAGAR, HIRA BAUG, VARACHHA ROAD, SURAT - 395006, GUJARAT, INDIA. (72)Name of Inventor : 1)DR. CHETAN BALAR

(57) Abstract : The present invention is based on a product as a fungicide and bactericide for agriculture crop especially cumin crop. Mode of action of both the compound prevents or protects the cumin crop through the stop pathogenic organism by killing or static action to fungal and bacteria organism respectively cinnamaldehyde and eugenol by foliar spraying on said crop. No. of Pages : 12 No. of Claims : 10


29527


(54) Title of the invention : THE DEVELOPMENT OF NOVEL AL2O3 AND OMMT NANO PACKING MATERIAL FOR LIQUID-LIQUID EXTRACTION

(51) International classification :C10G19/02, C22B3/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)RAHUL NARENDRA SHARMA Address of Applicant :DEPARTMENT OF CHEMICAL ENGINEERING, VNIT, NEAR SOUTH AMBAZARI ROAD, NAGPUR-440010, . Maharashtra India 2)DR. SHRIRAM S. SONAWANE (72)Name of Inventor : 1)RAHUL NARENDRA SHARMA 2)DR. SHRIRAM S. SONAWANE

(57) Abstract : Disclosed is a process for liquid-liquid extraction using two or more liquids. The process comprises supplying of a first mixture and a second mixture to an extraction column. The first mixture comprises a first liquid, first nanoparticle material, and solute, and the second mixture comprises second liquid and second nanoparticle material. The first liquid is in aqueous phase and the second liquid is in organic phase. The first nanoparticle material is Al2O3 nanoparticle and the second nanoparticle material is octadecylamine modified Montmorillonite Clay. The first mixture is interacted with the second mixture in the extraction column. The interaction of the first mixture with the second mixture enables a transfer of a mass of the solute from the first liquid to the second liquid and the first nanoparticle material and the second nanoparticle material facilitates transfer of the mass of the solute from the first liquid to the second liquid. No. of Pages : 22 No. of Claims : 10


29528


(54) Title of the invention : SAMSID CUSTUMOSIZED TEMPOROMANDIBULAR JOINT PROSTHESIS

(51) International classification :A61F2/00, A61F2/30 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)DR. SURESH CHAWARE Address of Applicant :D 16-17, SECOND FLOOR, RAJKAMAL COMPLEX, DHANTOLI, NAGPUR, PIN-440012, MAHARASHTRA, INDIA. (72)Name of Inventor : 1)CHAWARE; SURESH

(57) Abstract : Medical implant device for total temporomandibular joint replacement by customized joint prosthesis comprising (A) an artificial condyle component for fastening to the mandible, said artificial condyle component including a condylar head (ball) having an articular surface, area for fixation to mandible ramus and (B) an artificial mandibular fossa component for fastening to the temporal bone, said artificial mandibular fossa component having socket f foss for ball, area for fixation to skull ,said artificial mandibular fossa component being operable to engage said condylar head in an articulating manner. No. of Pages : 22 No. of Claims : 5


29529


(54) Title of the invention : RECYCLING OF PET BOTTLES TO FILL POT HOLES ON ROAD.

(51) International classification

:B09B 3/00, B29B17/04, B29B9/16


:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)DR. ARUN DEVIDAS ASHTAPUTRE Address of Applicant :67, 'MAMTA', TILAK NAGAR, INFRONT OF BALAJI MANDIR, AURANGABAD, MAHARASHTRA, INDIA. 2)RUCHA SUBODH MADHEKAR 3)RAJLAXMI RAVINDRANATH JOSHI (72)Name of Inventor : 1)DR. ARUN DEVIDAS ASHTAPUTRE 2)RUCHA SUBODH MADHEKAR 3)RAJLAXMI RAVINDRANATH JOSHI

(57) Abstract : A standard process of chemically recycling polyethylene terephthalate is used for degradation known as GLYCOLYSIS and further malice anhydride and phallic anhydride are used to prepare unsaturated polyester resin. This resin is then added to calculated amount of aggregates and measured quantity of curing agents. Pot holes are of main concern today. These pot holes lead to accidents. Now pot holes can be filled using PET resin made by recycling PET bottles with aggregates instead of tar. As unsaturated polyester resin has good strength and holding capacity, as it holds aggregates intact and it doesnt get detached from mixture. Research have been done using PET flakes with cement as filler but making unsaturated polyester and then adding aggregate into resin can prove to be of great use in construction and building sector. This project aims to recycle waste PET bottles by making a useful and durable product that can be used in day-to-day life, leading to reduction in quantity of wastes. No. of Pages : 23 No. of Claims : 5


29530

(12) PATENT APPLICATION PUBLICATION (21) Application No.3222/CHE/2013 A (19) INDIA (22) Date of filing of Application :19/07/2013 (43) Publication Date : 25/07/2014

(54) Title of the invention : DYNAMIC ADAPTABILITY SYSTEM (51) International classification :b60n (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)DR. DASARI VAMSHI NAG Address of Applicant :#102, 3-6-780/14, STREET NO: 14, HIMAYATH NAGAR, HYDERABD - 500 029 Andhra Pradesh India (72)Name of Inventor : 1)DR. DASARI VAMSHI NAG

(57) Abstract : Exemplary embodiments of the present disclosure are directed towards a dynamic adaptability system. The system includes an actuator configured to provide a movement to a seat in at least one of forward direction and backward direction, a motor configured to provide a movement to the seat in at least one of upward direction and lowered direction and two or more lead screw rods or any other mechanical actuator positioned vertically at two distal ends of a parallel track to convert the seat into a berth with/without the multi-function supporting partitions which initially are in hiding/not, may project and provide support to the formed berth. No. of Pages : 11 No. of Claims : 6


29531


(54) Title of the invention : TRANSPORTATION VEHICLE WITH CONVERTIBLE AND INFLATABLE SEATS (51) International classification :b60n (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)DR. DASARI VAMSHI NAG Address of Applicant :#102, 3-6-780/14, STREET NO: 14, HIMAYATH NAGAR, HYDERABD - 500 029 Andhra Pradesh India (72)Name of Inventor : 1)DR. DASARI VAMSHI NAG

(57) Abstract : Exemplary embodiment of the present disclosure is directed towards a transportation vehicle with convertible and inflatable seats arrangement. The arrangement includes a multiple seats configured to change a position at least one of inflates or/and deflates based on a users choice. One or more designated buttons configured to change the position of the multiple seats. No. of Pages : 12 No. of Claims : 10


29532


(54) Title of the invention : METHODS FOR PRIORITIZING AND ASSIGNING ONE OR MORE EXCEPTIONS AND DEVICES THEREOF (51) International classification :g06f (31) Priority Document No :NA(32) Priority Date :NA(33) Name of priority country :NA(86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)WIPRO LIMITED Address of Applicant :Doddakannelli, Sarjapur Road, Bangalore 560035, Karnataka, India. (72)Name of Inventor : 1)SUDEEP REDDY SOMANNA 2)SHILPA GOEL

(57) Abstract : A method, non-transitory computer readable medium and exception management computing device for obtaining one or more exceptions and information associated with each of the obtained one or more exceptions. Each of the obtained one or more exceptions is classified as either a relevant exception or a non-relevant exception based on the obtained information associated with each of the obtained one or more exceptions. Each of the obtained one or more exceptions classified as being the relevant exception is prioritized based on one or more business rules. The prioritized one or more relevant exceptions are assigned to the one or more agents based on one or more skills of the one or more agents prioritized. No. of Pages : 27 No. of Claims : 13


29533


(54) Title of the invention : SYSTEM AND METHOD FOR PREDICTING AFFINITY TOWARDS A PRODUCT BASED ON PERSONALITY ELASTICITY OF THE PRODUCT (51) International classification :g06q (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)WIPRO LIMITED Address of Applicant :Doddakannelli, Sarjapur Road, Bangalore 560035, Karnataka, India. (72)Name of Inventor : 1)ABHISHEK GUNJAN 2)SHILPA GOPINATH

(57) Abstract : The present disclosure relates to systems, methods, and non-transitory computer-readable media for predicting affinity of a user towards a product based on personality elasticity of products. The personality elasticity of products means elasticity of affinity towards product with personality profile. The value of elasticity of a product with respect to a personality trait is higher if a difference in personality trait is significant in causing a variation in the affinity towards the product. Further, the present disclosure provides improved product recommendations by correlating personality elasticity of products with big five personality trait model by retrieving user information (like psychographic and demographic details) from different sources. Higher weightage is attributed to more significant personality traits. No. of Pages : 49 No. of Claims : 17


29534


(54) Title of the invention : METHODS FOR CALCULATING A CUSTOMER STAISFACTION SCORE FOR A KNOWLEDGE MANAGEMENT SYSTEM AND DEVICES THEREOF (51) International classification :g06q (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)WIPRO LIMITED Address of Applicant :Doddakannelli, Sarjapur Road, Bangalore 560035, Karnataka, India. (72)Name of Inventor : 1)SREENIVAS KUNAPULI 2)ANURADHA PENTAREDDY

(57) Abstract : A method, non-transitory computer readable medium, and device that calculates a customer satisfaction score for a knowledge management system includes calculating a knowledge artifact score for a plurality of knowledge artifacts obtained from an overall set of knowledge artifacts, based on at least one of a newness value or a utility value for each of the plurality of the knowledge artifacts. Subsequently, a customer satisfaction index for the plurality of knowledge artifacts obtained from the overall set of knowledge artifacts is determined based on at least a knowledge artifact quality and a customer artifact experience. Next a customer feedback score is determined based on at least a knowledge management system performance score and a customer system experience score. A total customer satisfaction score for the knowledge management system is then calculated based on the calculated knowledge artifact score, the determined customer satisfaction index and the determined customer feedback score. No. of Pages : 29 No. of Claims : 15


29535


(54) Title of the invention : SYSTEM AND METHOD FOR COMPLYING WITH SOLVENCY REGULATIONS (51) International classification :g06q (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)WIPRO LIMITED Address of Applicant :Doddakannelli, Sarjapur Road, Bangalore 560035, Karnataka, India. (72)Name of Inventor : 1)RAHUL KRISHNA DESHPANDE 2)MUTHUSELVAM CHANDRAMOHAN 3)PRASANTH THOPPIL SIVASANKARAN

(57) Abstract : Systems and methods for complying with solvency regulations of one or more jurisdictions are described herein. In one example, the method, for complying with solvency regulations of one or more jurisdictions, comprises classifying financial data based on type of risk associated with the data and performing solvency gateway checks, based on solvency rules, to determine validity of the classified data for determination of risk. The method further comprises aggregating the validated data based on at least one aggregation level and computing the solvency risk, based on risk computation rules, associated with the aggregated data. No. of Pages : 25 No. of Claims : 12


29536


(54) Title of the invention : WATER/SPHERICAL MATERIAL BALANCED LEVER MECHANISM TO GENERATE POWER (51) International classification :f16k (31) Priority Document No :NA(32) Priority Date :NA(33) Name of priority country :NA(86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)A. JESU ANTONY MARIA SUGAN Address of Applicant :PLOT NO: 8, (P.NO:22), SHANTHI NAGAR, 11TH STREET, PALAYAMKOTTAI, TIRUNELVELI - 627 002 Tamil Nadu India (72)Name of Inventor : 1)A. JESU ANTONY MARIA SUGAN

(57) Abstract : The invention discloses a novel method to generate power by using water or any suitable spherical material in a Balanced lever mechanism to generate power. No. of Pages : 23 No. of Claims : 3


29537


(54) Title of the invention : SYSTEM AND METHOD FOR PRESENTING BILLS FOR A UTILITY AND ONLINE PAYMENT THEREOF (51) International classification :g06q (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)VEERUBHOTLA NARAYANA SWAROOP Address of Applicant :102, Shirdi Residency, Madhavi Nagar, Kukatpally, Hyderabad. India (72)Name of Inventor : 1)VEERUBHOTLA NARAYANA SWAROOP

(57) Abstract : A computer implemented system and method adapted for enabling a virtual product promoting platform for facilitating a real-time merchandise experience to a user including providing an unique authorization to a product promoting entity including a vendor and an operator and the user, obtaining a product identifying information associated with a user identifier for a particular product selected by the user from a user terminal, determining a respective product identifier based on the received product identifying information, maintaining in association with the user identifier a personal merchandise database of respectively comprising the determined product identifier of the selected product, generating an electronic order form based on the personal merchandise database, transmitting the electronic order form to the vendor utilizing a communication network, generating an invoice for the particular product selected by the user in a predefined period of time and delivering the particular product to the user during specified time. No. of Pages : 17 No. of Claims : 11


29538


(54) Title of the invention : SYSTEM TO ENABLE ELECTRONIC PAYMENTS WITH MOBILE TELEPHONES WITHOUT RISK OF ANY FRAUD (51) International classification :g06f (31) Priority Document No :NA(32) Priority Date :NA(33) Name of priority country :NA(86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)K R PRASHANT Address of Applicant :NO 18, OLD 50, SUBRAMANIAM ST., ABHIRAMAPURAM, CHENNAI 600 018 Tamil Nadu India 2)RAMKRISHNA JAIRAM IYER (72)Name of Inventor : 1)K R PRASHANT 2)RAMKRISHNA JAIRAM IYER

(57) Abstract : The invention described herein is a process realized though a set of apparatuses that ensureelectronic payment transactions initiated over point-of-sale counters, web retailing and ATMs remain free of fraud. The invention is devised in a manner that electronic transactionsare conducted through the use of a smart mobile station and does not involve the use of plastic cards with magnetic strips / embedded chips that are in vogue today. Each transaction initiated by a merchant or User is identified by the Users mobile number and does not carry any sensitive information about the merchant or the user over public networks. The electronic transactions initiated and processed with the said invention are completed within the Bank or Financial Institutions Network, thereby precluding the role Credit Card Associations reducing transaction cost as well as providing aforementioned security and privacy. The fool-proof electronic security certificates issued by the Bank or Financial Institution are used to uniquely identify both users and merchants, and are the sole means of authentication and authorization. The said invention protects Users from eventualities such as loss or cloning of the mobile stations through a hardened security mechanism; protects the Bank or Financial Institution from receiving unauthorized transactions; shields merchants from any participation in fraudulent transactions. No. of Pages : 48 No. of Claims : 63


29539


(54) Title of the invention : ON LINE AUTO METER AND METER BOX (51) International classification :h04n (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)MANSOOR ALI KHAN Address of Applicant :OLD NO: 8, NEW NO: 19, JEYAMMAL STREET,1ST FLOOR,CHENNAI - 600 018 Tamil Nadu India (72)Name of Inventor : 1)MANSOOR ALI KHAN

(57) Abstract : First, the software for making the tablet or computer work functionally well, imbibing the features of metering, correcting and altering cost of rise of fuel when and what so ever, giving accurate cost Vs kilometer, which is tamper proof on-line monitoring, and controlling of the auto rickshaw plying anywhere in the region which is brought under the surveillance of the authorities through GPS and satellite based imageries and tracking methods. Second, added features like live streaming of entertainment, media and television shows, advertisement for the passenger as well as introduction of safety features like PANIC BUTTON with a camera taking immediate snaps shots of both the driver and the passenger / occupant of the vehicle and sending the same to the controller room / of both the software control room as well as Police control room and nearby Police station, thereby giving fool proof safety for all involved in the said trip. Third, the social status of the auto drivers is enhanced by this idea and invention. The above mentioned features are always embedded in the software to give utmost safety for women passengers and women auto drivers. The larger impact is to give the social status and improvement of life and betterment for the auto rickshaw drivers especially women drivers. The said meter invented and made would provide also accurate cost and will also have a separate welfare box for both contributions of tips and suggestions/ complaints on the vehicle driver and the service. This would enable the inventor bring in social welfare measures by providing utmost comfort and confidence which is now lacking in the present working and functioning of both auto rickshaws and auto meters. The physical form of meter: The electronic meters today also are very contrived in both limits of functionality and facility. They can be tampered for faster running and fleecing the innocent passenger by tampering done by certain auto owners and drivers. The new invention limits the usage of the meter for the auto driver, who can only press the ON button and cannot do anything to change the features or functioning of the auto meter. Other only possibility of him or her operating the whole meter is to use the provision of printing the bill/ invoice for the customer. Now the box has been done with tamper proof metal, with premium design and state of the art fabrication methodologies bringing in robust, elegant and sleek look yet having all the embedded features like those functions explained elsewhere in this document. The meter box has provisions for online metering, GPS tracking, Google mapping, locating the vehicle, driver and passenger at any time by both the service providers control room as well as the Police control room under whose jurisdiction the vehicle may play. The meter box has additional features like printing of bills, live entertainment and advertisement viewing which again he can choose from the alternatives / choices of channels and advertisements provided by the service provider. The user or passenger can also bring in immediate attention of the authorities by pressing the HELP Button (Panic button) if in case the passenger in unduly harassed by the driver or in case of accidents, health related emergencies. The boxes are also made to suit the end. needs and aesthetics of the vehicle in which it would be fitted. Samples in black (general purpose and common auto), green (eco friendly, eco-fuelled vehicle) and pink ( like exclusive women auto, for women, driven by women drivers) are already made and photos are attached (Annexure 4jQ3fii‚¬s0 The drawings are also attached for the current design, which will be dynamically changed to match and tailor-made to fit the evolving changes in technology and design and manufacturing methods. (Annexure 7) No. of Pages : 11 No. of Claims : 4


29540

Publication After 18 Months: The following Patent Applications have been published under Section 11A (3) of The Patents (Amendment) Act, 2005. Any Person may file representation by way of opposition to the Controller of Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents (Amendment) Act, 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006: (12) PATENT APPLICATION PUBLICATION (21) Application No.2752/DEL/2012 A (19) INDIA (22) Date of filing of Application :05/09/2012 (43) Publication Date : 25/07/2014

(54) Title of the invention : HEAT EXCHANGER, AND METHOD FOR TRANSFERRING HEAT (51) International classification :H05K7/20 (31) Priority Document No :61/649,046 (32) Priority Date :18/05/2012(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)MODINE MANUFACTURING COMPANY Address of Applicant :1500 DEKOVEN AVENUE RACINE, WI 53403-2552 UNITED STATES OF AMERICA (72)Name of Inventor : 1)JOHNSON, MARK 2)ENGEL, BRADLEY

(57) Abstract : A HEAT EXCHANGER IS PROVIDED TO EFFICIENTLY TRANSFER HEAT BETWEEN AIR AND A FLOW OF REFRIGERANT IN A REVERSING AIR-SOURCED HEAT PUMP SYSTEM. WHEN THE SYSTEM IS OPERATING IN HEAT PUMP MODE, A FLOW OF AIR IS DIRECTED THROUGH THE HEAT EXCHANGER AND IS HEATED BY THE REFRIGERANT. A PORTION OF THE FLOW OF AIR IS PREVENTED FROM BEING HEATED BY THE REFRIGERANT IN A FIRST SECTION OF THE HEAT EXCHANGER, AND IS USED TO SUB-COOL THE REFRIGERANT IN ANOTHER SECTION OF THE HEAT EXCHANGER AFTER THE REMAINING AIR HAS BEEN HEATED BY THE REFRIGERANT. THE SAME HEAT EXCHANGER CAN BE USED TO COOL A FLOW OF AIR USING EXPANDED REFRIGERANT WHEN THE SYSTEM IS OPERATING IN AN AIR CONDITIONING (COOLING) MODE.

No. of Pages : 22 No. of Claims : 16


29541


(54) Title of the invention : EVAPORATOR AND METHOD OF CONDITIONING AIR (51) International classification :F25B39/02 (31) Priority Document No :13/544,027 (32) Priority Date :09/07/2012(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)MODINE MANUFACTURING COMPANY Address of Applicant :1500 DEKOVEN AVENUE RACINE, WI 53403-2552 UNITED STATES OF AMERICA (72)Name of Inventor : 1)JOHNSON, MARK W. 2)STEINBACH, ERIC P. 3)BAKER, GEORGE A. 4)ENGEL, BRADLEY C. 5)KOHLER, GREGORY T.

(57) Abstract : AN EVAPORATOR INCLUDES AN INLET MANIFOLD, AN OUTLET PARALLEL TO THE INLET MANIFOLD, AND A COLLECTION MANIFOLD PARALLEL AND ADJACENT TO THE OUTLET MANIFOLD. FIRST FLOW CONDUITS EXTEND FROM THE INLET MANIFOLD TO THE COLLECTION MANIFOLD, AND AT LEAST ONE SECOND FLOW CONDUIT EXTENDS FROM THE COLLECTION MANIFOLD TO THE OUTLET MANIFOLD. THE EVAPORATOR CAN BE HOUSED WITHIN AN ENCLOSURE TO PROVIDE A CASED EVAPORATOR. AIR IS CONDITIONED BY TRANSFERRING HEAT FROM THE AIR TO REFRIGERANT AS THE AIR PASSES THROUGH THE EVAPORATOR. THE REFRIGERANT IS RECEIVED FROM OUTSIDE THE ENCLOSURE INTO THE INLET MANIFOLD, AND IS DIRECTED THROUGH FIRST AND SECOND REFRIGERANT PASSES TO RECEIVE HEAT FROM THE AIR. THE FLOW OF REFRIGERANT IS RECEIVED FROM THE SECOND PASS INTO A COLLECTION MANIFOLD, IS TRANSFERRED TO AN OUTLET MANIFOLD, AND IS REMOVED FROM THE ENCLOSURE.



29542


(54) Title of the invention : STAINLESS STEEL AND SILVER COLORED PVD COATINGS (51) International classification :C07C (31) Priority Document No :13/248530 (32) Priority Date :29/09/2011(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)VAPOR TECHNOLOGIES, INC. Address of Applicant :6400 DRY CREEK PARKWAY LONGMONT, COLORADO 80503 UNITED STATES OF AMERICA (72)Name of Inventor : 1)ANTON, BRYCE RANDOLPH 2)RICE, JEFFREY S.

(57) Abstract : A METHOD OF MAKING A COATED SUBSTRATE COMPRISES DEPOSITING A BASE LAYER ONTO A SUBSTRATE J TO FORM A FIRST COATED SUBSTRATE. A CHROMIUM NITRIDE LAYER IS THEN DEPOSITED ONTO THE FIRST COATED SUBSTRATE TO FORM A SECOND COATED SUBSTRATE. THE CHROMIUM NITRIDE HAS AN ATOMIC PERCENT OF NITROGEN LESS THAT ABOUT 45 ATOM PERCENT.



29543


(54) Title of the invention : HYBRID DRIVE TRAIN AND METHOD FOR CONTROLLING A HYBRID DRIVE TRAIN � (51) International classification :B60W (31) Priority Document No :102011055085.2(32) Priority Date :07/11/2011 (33) Name of priority country :Germany (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)DR. ING. H.C.F. PORSCHE AKTIENGESELLSCHAFT Address of Applicant :Porscheplatz 1 70435 Stuttgart Germany (72)Name of Inventor : 1)VOLKER G„RTNER 2)DOMINIK BENDER

(57) Abstract : A HYBRID DRIVE TRAIN FOR MOTOR VEHICLES, HAVING AN INTERNAL COMBUSTION ENGINE (4), AN ELECTRIC MOTOR (6), A HIGH-VOLTAGE SOURCE (8), A SEPARATING CLUTCH (10), AN 10 AUTOMATED SHIFT TRANSMISSION (12), AND AT LEAST ONE CONTROL DEVICE (18), WHEREIN THE INTERNAL COMBUSTION ENGINE (4) HAS AN ENGINE SHAFT (20), WHICH IS CONNECTED TO A FIRST CLUTCH MEMBER (22) OF THE SEPARATING CLUTCH (10), AND WHEREIN A SECOND CLUTCH MEMBER (24) OF THE 15 SEPARATING CLUTCH (10) IS CONNECTED TO A TRANSMISSION INPUT SHAFT (26) OF THE AUTOMATED SHIFT TRANSMISSION (12), SUCH THAT THE INTERNAL COMBUSTION ENGINE (4) AND THE ELECTRIC MOTOR (6) ACT DIRECTLY AND/OR INDIRECTLY ON THE TRANSMISSION INPUT SHAFT (26), EITHER TOGETHER 20 OR SEPARATELY, AND WHEREIN A ROTOR OF THE ELECTRIC MOTOR IS CONNECTED TO THE TRANSMISSION INPUT SHAFT (26) FOR CONJOINT ROTATION, WHEREIN THE AUTOMATED SHIFT TRANSMISSION (12) IS EMBODIED AS A DUAL CLUTCH TRANSMISSION, WHICH HAS A FIRST TRANSMISSION CLUTCH 25 (28) AND A SECOND TRANSMISSION CLUTCH (30)



29544


(54) Title of the invention : CAMERA SYSTEM FOR ALIGNING COMPONENTS OF A PCB� (51) International classification :H05K13/04 (31) Priority Document No :61/558,347 (32) Priority Date :10/11/2011(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)DELAWARE CAPITAL FORMATION INC. Address of Applicant :501 Silverside Road Suite 5 Wilmington Delaware 19809 U.S.A. (72)Name of Inventor : 1)HAO DINH NGUYEN

(57) Abstract : A CAMERA SYSTEM AND ASSOCIATED METHOD FOR ALIGNING A COMPONENT WITH A FOOTPRINT ON A PCB INCLUDING: A HOUSING HAVING A FIRST SIDE AND A SECOND SIDE OPPOSITE TO THE FIRST SIDE; A FIRST IMAGE SENSOR POSITIONED ON THE FIRST SIDE OF THE HOUSING

official journal of the patent office · 2014-07-25 · the patent office journal 25/07/2014 29503...

Documents