Muhammad SajidAddress: Flate # A-5,Alliance Paradise, Phase-II(LS-12), Sector 11-C/1,North Karachi, Karachi, Pakistan.(+92)-333-2210576sajidsb@hotmail.com

Objective: Challenging and rewarding Job in a growth-oriented organization, which offers diverse job responsibilities and will fully utilize abilities.

Educational Background:

Bachelor of Technology (B.Tech.) in Mechanical Engineering with 3.27 CGPA from Dada Bhoy Institute of Higher Education, Karachi, Pakistan in 2004.

D.A.E. with 2nd Division from Pak Swiss Training Center, Karachi in 1997.

S.S.C. with 1st Division from Govt. High School Sanghar in 1994.

Certifications, Skills & Visits:

Coating Inspection “NACE Coating Inspector Level-I (CIP-I)” from NACE International, Dubai International Academy City, Unit Arab Emirate (UAE).

Advance NDT Technique Certifications & Trainings “Ultrasonic Testing (UT) Level-II in Phased Array Technique” according to ASNT-SNT-

TC-1A through A-Star Training & Consultancy (Pte) Ltd. Singapore. In August’ 2014.

“Ultrasonic Testing (UT) Level-II in TOFD Technique” according to ASNT-SNT-TC-1A through ASNT Level-III from Peoples Steel Mills Limited, Karachi. In August’ 2012. (Re-certification on March’2015)

“Training on Phased Array (PA) & Time of flight Diffraction (TOFD)” (02 weeks) from Olympus Singapore PTE Ltd (SINGAPORE). In January- February 2012.

“Course on Phased Array (PA) & Time of flight Diffraction (TOFD)” (1 week) from National Center for NDT, Islamabad. In Dec’2011.

Conventional NDT Level-II Certifications “Ultrasonic Testing (UT) Level-II” according to ASNT-SNT-TC-1A through ASNT Level-III from

Peoples Steel Mills Limited, Karachi. In July’ 2009 (Last Re-certification on February ’2015)

“Radiographic Testing (RT) Level-II” according to ASNT-SNT-TC-1A through ASNT Level-III from Entourage International, Islamabad. In June’ 2010 (Re-certification on June’2013 from Peoples Steel Mills Limited, Karachi)

“Magnetic Particle Testing (MT) Level-II” according to ASNT-SNT-TC-1A through ASNT Level-III from Entourage International, Islamabad. In June’ 2010 (Last Re-certification on February ’2015 from Peoples Steel Mills Limited, Karachi)

1/6

“Dye Penetrant Testing (PT) Level-II” according to ASNT-SNT-TC-1A through ASNT Level-III

from Entourage International, Islamabad. In Jan’ 2011.(Re-certification on February ’2014 from Peoples Steel Mills Limited, Karachi)

NDT Level-I Certifications "Radiographic Testing Level-I " with 3rd position (92% marks) from "National Center for NDT

(NCNDT)", Islamabad. In Dec’ 2008.

Other NDT Trainings “Ultrasonic Flaw Sizing Of Defects” (3 weeks) from National Center for NDT, Islamabad. In

2001.

Visits SINGAPORE A-Star Training & Consultancy (PTE) Ltd. - August’2014 (16 Days) For Ultrasonic Testing Level-II in Phased Array Technique.

Olympus Singapore PTE Ltd. - Jan-Feb’2012 (21Days) For Training of Advance Ultrasonic Testing Equipment (TOFD & PAUT) (Model #OMNI MX).

CHINA Dan Dong Hua Ri Electric Co. Ltd. - May’2009 (06 Days) For Inspection and Training of Radiographic Testing machine (Model # XXG-3005).

Other Training & Skills Well use of MS Office

Well use of Internet

Well use of ERP

Awareness training of “ISO 9001:2000” from Peoples Steel Mills Limited, Karachi.

Training as “Internal Auditor of ISO 9001:2000” from Peoples Steel Mills Limited, Karachi.

Projects:

Project: Integrity Inspection of Solvent Naphtha Stripper & Top Dish End of Pre-Flash Tower EPRF-I,

Client: ENAR Petroleum Refining Facility-I

Job description: Performed Thickness Measurement (UT), Dye Penetrant Testing (PT), Hardness Testing

Project: Inspection of Pipe Fittings at EPRF-II, Client: ENAR Petroleum Refining Facility-II

Job description: Performed and monitored Thickness Measurement (UT), Radiographic Testing (RT), Dye Penetrant Testing (PT), Position Material Identification (PMI) and metallography

2/6

Project: Fabrication of columns & pressure vessels, of EPRF-II project Client: ENAR Petroleum Refining Facility-II, Enar Petrotech Services.

Job description: Performed Ultrasonic Test (UT), Radiographic Testing (RT), Magnetic Particle

Testing (MT), Dye Penetrant Testing (PT) and Thickness measurements..

Project: Fabrication & Installation of Electric Arc Furnace & Ladle, under ground diesel & kerosene storage tanks

Client: PSM in-house project

Job description: Performed Ultrasonic Test (UT), Radiographic Testing (RT), Magnetic Particle

Testing (MT), Dye Penetrant Testing (PT) and Thickness measurements.

Project: Construction of Petroleum products storage tanks (capacity 12500 bbl) at EPRFII, Karachi. Client: Enar Employees Trust/Enar Petrotech Services

Job description: Performed Ultrasonic Test (UT) & Radiographic Testing (RT),

Project: Fabrication of penstock with accessories

Client: Hydrotech power/WAPDA Hydro Power

Job description: Performed Radiographic Testing (RT),

Project: Maintenance of Stablizer drill bit Client: Weather ford Pakistan

Job description: Performed Ultrasonic testing (UT).

Project: Life assessment of LGO Hydrotreator Reactors, Naphtha Hydrotreator and Plate forming Reactors

Client: Byco Oil Pakistan Limited

Job description: Performed Ultrasonic testing (UT).WFMPI, DPT

Project: TURNAROUND ACTIVITIES 2011 Client: ENI Pakistan (Bhit Gas Field)

Job description: Performed Ultrasonic testing (UT).WFMPI, DPT

Project: Construction of Storage Tank Client: ENI Pakistan (Bhit Gas Field)

Job description: Performed Ultrasonic testing (UT) of base plates

Project: Construction of Loop lines Client: ENI Pakistan (Bhit Gas Field)

Job description: Performed Ultrasonic testing (UT) of loop lines

3/6

Project: Installation of Compressor at Qadir Pur gas plant Client: Oil & Gas Development Corporation (OGDCL)

Job description: Performed Radiographic Testing (RT),

Project: Steel Plant Fabrication Client: Aaisa Steel

Job description: Performed Radiographic Testing (RT), Ultrasonic testing (UT)

Project: Maintenance of Hrbour Mobile Crane Client: Karachi Port Trust (KPT)

Job description: Performed Ultrasonic Testing

Professional Experience:(March-1998 to Till date- 16 years)

Full Time Job

Feb 2000 – Continue Peoples Steel Mills Limited. Manghopir, KHI Working as Assistant Manger (Incharge NDT Section) in Quality Assurance and

Development. Current Responsibilities

(1.) Incharge NDT section Communicate NDT results to other sections & customers/ Clients Manage & monitor Project activities at client sites. Correspondence with suppliers & customers Arrange NDT consumables and Accessories. Establish Procedures and work guide lines. Make technical / commercial documents for bids. Coordinate with regularities bodies Like PNRA (Pakistan Nuclear Regulatory Authority). Manage manpower according to work load. Maintain the documentation of the section as per ISO-9001: 2008 requirements

(a) Radiographic Testing (RT) Perform and monitor Radiographic Testing (RT) on Pressure Vessels, columns,

welded Plates & Pipe lines. Well use of x-ray machines and gamma ray Source (Ir-192). Working on directional and panoramic x-ray machines. (300Kv &160Kv) Well know how about Radiographic Technique & development of films. Well Know how of different International Standards for Radiographic Testing such

as ASME Boiler & Pressure Vessel Code, API, ASTM Standards.

(b) Ultrasonic Testing (UT) Perform and monitor ultrasonic Testing (UT) on Pressure Vessels, columns, welded

Plates, Pipes, Rolled, Forged, and Cast Products. Well use of ultrasonic flow detector model No USM25S & USM 35 x (GE-

Germany) , TUD 201 (Time Corporation-China) .Epoch LT (Olympus-USA). Use of Advance ultrasonic testing equipments for Time of Flight Diffraction (TOFD)

and Phased Array (PA) (omni MX & Omni MX2) Measurements of thickness through thickness gauge TI-CMXDL (CHECK-LINE,

USA). DMS 4 (Make GE-Germany) & T-Gage IV (Sonatest, England)

4/6

Well use of ultrasonic editing / evaluation software’s (Ultra doc, Omni PC,Tomoview

2.10 R19) Well Know how of different International Standards for UT (ASME Pressure Vessel

Code, ASTM & API Standards).

(c) Magnetic Particle Testing (MT) Perform and monitor Magnetic Practical Testing (MT) on Rolled, Forged Cast

product, Pipe Line and Welds. Well Use of bench type MPT machines Model No. BCD-3000 (Make Johnson &

Allien, England). Well use of AC yoke, DC yoke, permanent Magnate. Well know how of different International Standards for MT such as ASTM. ASME

(d) Dye Penetrant Testing (PT)

Perform and monitor Dye Penetrant Testing (PT) on Castings, Pipe lines, welding and Forged, Rolled and Machined product.

Perform both type (Visible and Florescent) Dye Panetrant. Well know how of different International Standards for PT.(e) Positive Material Identification (PMI)

Perform MPI through portable XRF analyzer (Alpha series-Innov-x system).(f) Portable Hardness Testing

Perform Hardness testing through portable hardness tester.(HT-1000A, G & R Technology, USA)

Full Time JobMarch 1998 to feb 2000 Transmission Engineering Industries Limited. Hub Blochistan

Worked as a Quality Control Supervisor.Responsibilities were: Performed online inspection. Performed final inspection. Development and design the route of new product. Performed calibration of measuring instruments.

Personal Details:

Date of Birth: 15th March 1979.

Father’s Name: Maqbool Ahmed.

N.I.C. #: 44206-2372602-1

Passport # BF5576022

Marital Status Married

Reference:References will be furnished on demand.

Last Update: 25-02-2016

5/6