led panel light suspended installation guide
TRANSCRIPT
WARNING/AVERTISSEMENRisk of Fire. Do not install insulation within 3 inches (76 mm) of luminaire top.Risques d’incendie. Ne pas installer d’isolation à moins de 76 mm (3 pouces)au-dessus du luminaire.
CAUTIONDo not perforate the integrity of the luminaire. Only screw into the threaded mounting bracket holes located at the four corners of the fixture.
Environmental Operating Temperature RangeEnvironmental RatingEnvironmental Storage Temperature Range
-10°C to +40°CDry location rated-40°C to +60°C
Refer to TLP Series LED Panel Specification for more lamp electronical data info.
Storage Info
www.sgslight.com | [email protected]
SUSPENDEDFor TLP-X/F/M/A/E Series
INSTALLATION STEPS
Items3030 3060 6060 6262 3012 6012
X 2 X 3X 2 X 3X 4 X 6X 2 X 3X 2 X 3
wire A
wire B
Unscrew the highlighted screws from the four corners of the LED Panel.
Insert the wall plugs into the ceiling and secure the suspended surface fixture to the ceiling.
1 2
Screw the suspended panel fixture to the LED Panel.3 Screw the suspended cable to the LED Panel.4
www.sgslight.com | [email protected]
SUSPENDED KITS
TLP-FDJ2 TLP-FDJ3
Adjust the length of the suspended cable to the desired length.
5 Screw the suspended cable to the ceiling fixture.6
Distance
3030: 370mm3060: 370mm6060: 280mm
Distance
6262: 180mm3012: 370mm6012: 280mm
30120/60120
Please note the recommended distances for the ceiling fixtures.7
Fix the LED Panel to the ceiling and make final adjustments for desired height and angle.
8 Connect the LED Driver to AC mains power.9
3030: A: 222mm3060: 520mmA:
6060: 520mmA:6262: A: 505mm
3012: A: 425+B: 425mmA: 425+B: 425mm6012:
73012/6012
3012/6012
www.sgslight.com | [email protected]