gun safes - hospitality center · fire protection and fire security a cabinet with security level a...

… mit Sicherheit für Sie da!

Paderborn • Berlin • Düsseldorf • Köln • Hamburg • Frankfurt • Mailand • Paris • Straßburg • Den Haag • Warschau

HARTMANN TRESORE

HARTMANN TRESORE AG Paderborn • Hamburg • Berlin • Dusseldorf • Cologne • Paris • Milan • Warsaw • Zurich • Winterthur • Dubai

...there for you with security!

The new Generation of Rifle Cabinets

Tested and certified burglary protection in accordance with

EN 14450 security levels S1 and S2

VdS cabinets from class N [0] alsowith 30 minute fire test

Hunters - Sports marksmen - Collectors - Authorities

GUN SAFES

ABOUT US - CONTENTS

The HARTMANN TRESORE AGis a modern company that has grown out of a long line of craftsmanship and tradi-tion. More than 200 hundred years ago “Schmiede und Stellmacherei Hartmann” (a blacksmiths and cartwright company) was founded in Westphalia. We are proud that the steel construction company is a still family-run business. Christoph and Heinrich Hartmann founded HARTMANN TRESORE in 1983. It is an innovative and high-performance company that faces up to the challenges of a long-standing tradition.

Security with a systemTo secure your valuables we not only offer you a safe; we offer you a comprehensive security package.

Our Security Package for you:

QualityOur safes are characterised by the high-quality materials that are used in their manufacture and by the precision with which they are made: All safes comply with the high German safety requirements of the VDMA (German Engineering Association) and VdS GmbH (German association of damage insures) in line with the European standard. This is very important concerning insurance coverage. High quality is a prerequisite!

ServiceThere is no such thing as “no can do!” This motto has a tradition within the compa-ny. The purchase of any security system requires individual and discreet consultati-on and customer care. We are very aware of this! We are your competent partner from the first noncommittal consultation right up to the complete planning and execution phase. Our customer care service will be there to support you long after you have purchased with us.

Price-Performance Ratio It is our goal to achieve the most optimal price-performance ratio for you, which is why we reinforce the idea of price-conscious purchasing while still striving for high quality and rational manufacture of our products. This is security at staid prices!

Call us or visit one of our showrooms.

You can be secure in the knowledge that we are there for you!

LIST OF CONTENTSPage Model series Security level

HARTMANN RIFLE CABINETS

4 WT 080 / WT 100 Security level A/S1

5 WT 101 Security level A/S1

6 WT 083 Security level B/S2


8 WT 200 / WT 085 Security level B/S2


10,11 WT 250 Resistance grade N (0)/LFS 30P

12 WTS Resistance grade N (0)

13 WT 285 Resistance grade I

14 WT 270 Resistance grade I/LFS 30P

15 WT 297 Resistance grade I + S 60 P

15 WT 298 Resistance grade II + S 60 P

16 WT 300 Resistance grade I + S 120 P

16 WT 310 Resistance grade II + S 120 P

HARTMANN SHORT WEAPONS CABINETS

17 WTS 060-01 without security level

18 WS 165 Resistance grade N (0)

18 WS 175 Resistance grade I

18 K 102 K Security level B/S2

HARTMANN AMMUNITION SAFES

19 WS 125 Security level A/S1

20,21 HARTMANN WEAPONS ROOM DOORS

21 HARTMANN ROOM-IN-ROOM SYSTEMS

HARTMANN Exclusive Line

22-23 HARTMANN BULLETPROOF GLASS RIFLE CABINETS

24 HARTMANN BULLETPROOF GLASS CABINETS

25 HARTMANN OAK CABINETS

26-27 HARTMANN SOLID WOODEN CABINETS

28-31 by HARTMANN TRESORE

28 HT-REM 049 Resistance grade I/LFS 30P

29 HT-REM 047 Resistance grade N (0)/LFS 30P

30HT-REM 020HT-REM 040HT-REM 045

Security level ASecurity level BSecurity level B

32-33 HARTMANN AIRBRUSH - SAFES etc.

34-35 Accessories

34 HARTMANN VEHICLE RIFLE SAFESHARTMANN BULLET TRAP CONTAINERS

36-37 HARTMANN PRODUCT OVERVIEW

38 § - German weapons Law

39 References

2

Recommended by the Federal Association of Ger-man Professional Hunters

DEUTSCHER SCHÜTZENBUND E.V.

is official supplier to the Deutsche Schützenbund and its national team

HARTMANN TRESORE

SECURITY LEVELS

Security levels and Resistance grades

Security level/ Resi-stance grade Short description Safety feature Insurance rating* in €

Security level Aaccording to

VDMA 24992**

Door double-walled, corpus single walled

Limited burglary protection

Private €1,000Commercial €2,500

Security level S1 according to EN 14450

Door double-walled, corpus single-walledand locking device

Tested burglary protection


Security level Baccording to

VDMA 24992**Fire protection DIN 4102

Door and corpus double or triple-walled,

surrounding fire fold

Limited burglary protection,

fire protection


(some insurance companies up to €10,000)


Door double-walled, corpus generally double-walled

Tested burglary protection


Resistance grade N (0)according to EN 1143-1

LFS 30 Paccording to EN 15659***

Door and corpus multi-walled, surrounding fire fold

Tested burglary protection, guaranteed

resistance unit


Resistance grade Iaccording to EN 1143-1

LFS 30 Paccording to EN 15659***

Door and corpus multi-walled, door special filling,


Tested burglary protection, resistance unit

RU 30/50

Private €65,000,-*Commercial €20,000,-*

Resistance grade I according to EN 1143-1

S 60 Paccording to 1047-1

Door and corpus multi-walled, with special filling, multiple

fire fold

Tested burglary protec-tion, fire protection

S 60 P




Door and corpus multi-walled, with special concrete filling,

multiple fire fold


S 120 P


+ against fires





Tested burglary protection, fire protection

S 60 P


+ against fires

Resistance grade II according to EN 1143-1



fire fold


S 120 P


+ against fires

* Reference: VdS 0961, VdS 2333 and VdS 3134. The sums are non-binding guide values for Germany ** Dated 05/95 *** depends on the series

Safe after flame treatment Fall from a height of 9.15 m.

Tested Security Our weapons cabinets and safes meet high German security standards and European norms.They are tested by recognized and independent test institutes for burglary and fire protection and carry the appropriate test labels.

Fire protection and fire securityA cabinet with security level A offers more protection than a wardrobe for example. In the case of cabinets of secu-rity level B the the heat development in the safe is clearly reduced by the fire insulation and a surrounding fire fold.

Fire-protected safes according to EN 15659 (light fire-proof cabi-nets) protect documents and valuables from heat for an exposure time of 30 or 60 minutes (LFS 30 P or LFS 60 P). Therefore, the requirements of both of these fire grades lie unter S 60 P accor-ding to EN 1047-1.

Fire-proof safes according to EN 1047-1 protect the contents from fire, smoke and extinguishing water for 60 or 120 minutes. They have to pass the hardest of all fire tests at the Institute of Material Testing at the University of Braunschweig (MPA). For the test the safe is heated up to a temperature of 1090°C for 60 or 120 minutes and then gets droppedfrom a distance of 9,15 m onto a bed of gravel or crushed stone. This equates to a fall out of a three-storey building that is on fire.

3

The new Generation of Rifle CabinetsTested and certified burglary protection

in accordance with EN 14450 - Security levels S1 and S2VdS cabinets from class N [0] also with 30 minute fire test

VdSISO 9001�

according to

Security level A according to VDMA 24992**

HARTMANN RIFLE CABINET SERIES WT 080 Insurance rating private €1,000*and commercial €2,500*

Security level A according to VDMA standard form 24992**

Model Ext. dimensions(h x w x d) mm

Int. dimensions (h x w x d) mm W

eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

WT 080-01 1350 x 230 x 320 1344 x 224 x 257 50 1230 100 3

WT 080-02 1400 x 250 x 320 1394 x 244 x 257 54 1230 160 5 (2/3)

WT 080-03 1400 x 320 x 320 1394 x 314 x 257 62 1230 160 7 (3/4)

WT 080-04 1400 x 480 x 320 1394 x 474 x 257 87 1230 160 7 (3/4)

WT 080-06 1400 x 640 x 320 1394 x 634 x 257 107 1230 160 7 (3/4)

Single-walled steel cabinet. Door and corpus 3 mm steel. Door double walled. 3-sided bolt locking device. The rifles are placed one behind the other. So the rifles at the front have to be taken out in order to get at the ones at the back.

HARTMANN RIFLE CABINET SERIES WT 100with double-walled interior safe of security level B Insurance rating private €1,000*and commercial €2,500*



Int. dimensions (h x w x d) mm Weig

ht (i

n kg)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

WT 100-02 1400 x 350 x 350 1394 x 344 x 278 85 1230 170 6

WT 100-04 1400 x 500 x 350 1394 x 494 x 278 105 1230 170 8

WT 100-06 1400 x 700 x 350 1394 x 694 x 278 135 1230 170 12

WT 100-07 1500 x 550 x 350 1494 x 544 x 278 140 1230 260 6

Single-walled steel cabinet. Corpus 3 mm steel. Door double walled. Door leaf solid, 6 mm pure steel. 3-sided bolt locking device, bolt diameter 25 mm. Interior safes all in security level B, double walled: door and corpus 30 mm thick. Double-bit security lock with 2 keys.

For safekeeping your rifles

4

with interior safe of security level B

WT 100-06 WT 100-04

For secure storage of your long weapons and short weapons in the interior safe compartment

WT 100-02

WT 080-04WT 080-02

WT 080-03 WT 080-06

WT 100-07

NEW: On request, with locking interior safe compartment in the safe door opposite the wea-pons compartment.

Now also

tested & certifiedaccording to EN 14450

in S1


WT 101-04 /-05with 400 mm high interior safeof security level B





eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

WT 101-01 1600 x 400 x 350 1594 x 394 x 278 100 1294 300 6

WT 101-02 1600 x 550 x 350 1594 x 544 x 278 130 1294 300 8

WT 101-04 1700 x 600 x 400 1694 x 594 x 328 160 1270 420 5/9

WT 101-05 1700 x 800 x 400 1694 x 794 x 328 222 1270 420 8/12

Single-walled steel cabinet. Corpus 3 mm steel. Door double walled, 60 mm thick. Door leaf solid, 6 mm pure steel. Bulletproof plate in locking device area. 3-sided bolt locking device, each bolt of 25 mm diameter. Interior safe height in WT 101-04 and WT 101-05 as high as 420 mm (folder height!). Series-type interior safe of security level B. Door and corpus of interior safe 30 mm thick, with special fire protection insulation. Double-bit security lock with 2 keys.

Security level A according to VDMA 24992**

5

The solution for secure storage of your long and short weapons. With this series, your rifle cabinet comes equipped a with large double-walled interior safe of security level B. It is thus suitable for short hand weapons. From Model WT 101-04 folders and collection albums can also be securely stored in the best possible way.WT 101-04 and WT 101-05 have a detachable partition wall to increase the space for weapons storage.

WT 101-05 WT 101-04

Our Advice on Locking: Our cabinets are provided with high security VdS-tested double-bit lock, 2 keys included.

Advantage: Precisely defined, clearly higher security in the lock area.

Disadvantage: Keys can be lost. If this happens, the whole lock has to changed!

Our Advice:Have your safe fitted with an electronic combination or keypad lock. In this way you are independent of keys. The door can be opened easily and quickly at any time. Simply enter your number code.

WT 101-01 WT 101-02

Special featuresLock variants Mechanical combination lock

Electronic combination/keypad lock

Ideal for sports marksmen: large interior safe with plenty of space for hand weapons and/or ammunition!

Now also


in S1



HARTMANN TRESORE

WT 083-02with variable

interior arrangement with 5 + 3 rifle stands

Security level B according to VDMA 24992** HARTMANN FURNITURE SAFE

HARTMANN FURNITURE SAFE SERIES WT 083 Door and corpus double-walled - fire protection insulation Insurance rating private €1,000*and commercial €2,500*

Furniture safe of security level B acc. to VDMA standard form 24992**, Fire Protection acc. to DIN 4102



eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

WT 083-01 1500 x 425 x 380 1440 x 365 x 300 101 1240 200 6

WT 083-02 1500 x 500 x 390 1440 x 440 x 310 137 1240 200 5/8

WT 083-09 1600 x 550 x 390 1540 x 490 x 310 130 1330 200 9

WT 083-10 1600 x 550 x 390 1540 x 490 x 310 155 1330 200 6/9

Double-walled steel cabinet. Corpus 30 mm, door 50 mm, door leaf solid pure steel, drillproof and bulletproof plate in the lock area. Special bolt locking device. Door opening angle: 90°.WT 083-02 with 5 rifle stands, partition wall and 3 shelves, adjustable to 8 rifle stands. Partition wall fixed.WT 083-10 with 6 or 9 rifle stands. Interior safe 200 mm high with cylinder lock.

The series WT 083 is available as a furniture safe. It is lightweight in form and weighs less than 200 kg.Our customers get a product of established HARTMANN quality. Enjoy our service and the guarantees and pay no more than for other so-called ‚low-segment suppliers‘. Here too we have decided to present to you a rifle cabinet with an interesting interior life. The series WT 083 can be built into furniture. You can decide yourself whether the safe is to be used exclusively as a rifle cabinet or as a place to keep important documents in the shelf section. The WT 083-02 has been rebuilt with simple handles. A selection of variant forms is inclu-ded in the scope of delivery.

6

WT 083-01 WT 083-02

Special features Locking variants Mechanical combination lock

Electronic keypad lock

WT 083-09

WT 083-10

Top price-performance ratio! Ideal for sports marksmen:- Security level B - Space-saving through low exterior dimensions- As a result of the low weight, it can easily be built into almost any cabinet.- Large interior safe for short hand weapons or ammunition

Now also


in S2DEUTSCHER SCHÜTZENBUND E.V.

is official supplier

to the Deutsche

Schützenbund and

its national team

HARTMANN TRESORE

HARTMANN RIFLE CABINETS SERIES WT 084Door and corpus double-walled - fire protection insulationInsurance rating private €1,000*and commercial €2,500*

Security level B according to VDMA standard form 24992**, Fire Protection acc. to DIN 4102



eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

WT 084-01 1500 x 415 x 410 1380 x 295 x 280 200 1230 150 5

WT 084-02 1500 x 530 x 410 1380 x 410 x 290 200 1230 150 7

WT 084-03 1500 x 650 x 410 1380 x 530 x 290 200 1230 150 9

WT 084-04 1500 x 810 x 430 1380 x 690 x 300 200 1230 150 4/8/12

WT 084-05 1500 x 510 x 410 1380 x 390 x 290 200 1230 150 7

Double-walled steel cabinet. Corpus and door, 60 mm thick. Door leaf solid from 4 mm pure steel. Drillproof and bulletproof plate in the lock area. Bolt locking device.Door opening angle 90°. Interior safe height 150 mm. WT 084-04 with 4 plus 8 rifle stands and 3 or 6 shelves. The delivery includes 2 rails with once 4 and once 8 rifle stands that can easily be fixed to the rear wall, and altogether 6 shelves. The partition is fixed.For an individual space division there are various possible options (see fig. below)

Security level B according to VDMA 24992*

7

In this series unnecessary extras have not been included. But the requirements of VDMA are satisfied and you pay a minimal price for a „security level B“ cabinet. You receive a product of tested HARTMANN quality, enjoy our service and the guarantees and you do not pay any more than you would with so-called ‚low-segment‘ suppliers. And even in this rifle cabinet series we have decided to present to you a rifle cabinet with an interesting interior life.

The model WT 084-04 is a successful example of variable division of space.All possible variants are included. Not include, but worth considering as an intelligent supplement:Our equally very good value electronic lock.



WT 084-044 cabinets in one! WT 084-04 - none other as variable!

WT 084-02 WT 084-03

WT 084-05

WT 084-04

Now also


in S2

WT 200-02with detachable

partition wall, extendable to 10 rifle stands

WT 085-02 with 3 separate

interior safes, eachone 360 mm high


HARTMANN RIFLE CABINETS SERIES WT 200 Door and corpus double-walled - fire protection insulation Insurance rating private €1,000*and commercial €2,500*




eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

WT 200-01 1600 x 470 x 450 1480 x 350 x 330 205 1230 250 6

WT 200-02 1600 x 705 x 450 1480 x 585 x 330 210 1230 250 5/10

Double-walled steel cabinet. Corpus and door, 60 mm thick. Fire protection insulation. Door leaf solid from 6 mm pure steel. Drillproof and bulletproof plate in the lock area. Bolt locking device.Door opening angle 90°. Interior safe height 250 mm. WT 200-02 with detachable partition wall and 3 shelves.

Easy to put in a cabinet as a result of the exterior depth. The WT 200-02 has a holder with 5 rifle stands fixed to the rear wall, a second holder and 3 shelves are also included. With the shelf component you have a safe for valuable documents, papers and of course for your valuable weapons. Extend your rifle cabinet by fitting 2 rifle stands.

HARTMANN RIFLE CABINETS SERIES WT 085 Door and corpus double walled - fire protection insulation Insurance rating private €1,000*and commercial €2,500*




eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

WT 085-02 1750 x 800 x 500 1630 x 680 x 380 245 1270 3x 360 8

WT 085-10 1600 x 750 x 430 1480 x 630 x 310 200 1230/1330 6/10

WT 085-12 1600 x 1200 x 500 1480 x 1080 x 360 330 1230 2 x 250 12/18

Double-walled steel cabinet. Door and corpus, 60 mm thick. Door leaf solid from 4 mm pure steel. Bulletproof plate in lock area. Door opening angle 90°. Fire fold. Fire protection insulation. WT 085-10 with partition wall, 3 shelves and rails with 4 more rifle stands. 2 interior safes: height 150 mm and 250 mm. 3 door compartments. WT 085-02 with 3 interior safes, can be locked separately, each one 360 mm high (folder height). 3 shelves and 3 door compartments. WT 085-12 has double doors, shelf component 400 mm wide.

WT 085-10 with many extras. You can use your cabinet as a combined weapons cabinet and file safe, which offers good fire protection with its fire protection insulation or you can remove the shelves and extend the space for your rifle collection by four extra spaces.WT 085-02 similarly equipped with many extras.

WT 200-01

WT 200-02

WT 085-02 WT 085-10



1x 150 1x 250

WT 085-12

8

Now also


in S2




eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

WT 200-01 1600 x 470 x 450 1480 x 350 x 330 205 1230 250 6

WT 200-02 1600 x 705 x 450 1480 x 585 x 330 210 1230 250 5/10

Double-walled steel cabinet. Corpus and door, 60 mm thick. Fire protection insulation. Door leaf solid from 6 mm pure steel. Drillproof and bulletproof plate in the lock area. Bolt locking device.Door opening angle 90°. Interior safe height 250 mm. WT 200-02 with detachable partition wall and 3 shelves.

WT 087-20/-22also available as a swivel wall safe with up to 20 rifle stands.Security level B according to VDMA standard form 24992**, Fire Protection acc. to DIN 4102



eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

WT 087-01 1650 x 770 x 500 1530 x 650 x 340 243 1330 2x 200 7/11

WT 087-02 1650 x 1260 x 600 1530 x 1140 x 440 379 1330 16

WT 087-03 1500 x 700 x 500 1380 x 580 x 340 200 1230 150 13

WT 087-04 1500 x 700 x 500 1380 x 580 x 340 205 1230 150 6

WT 087-07 1650 x 640 x 500 1530 x 520 x 335 205 1280 250 8

WT 087-08 1600 x 990 x 550 1480 x 870 x 390 273 1280 200 15/19

WT 087-09 1600 x 990 x 550 1480 x 870 x 390 279 1280 200 12/16

WT 087-10 1650 x 900 x 500 1530 x 780 x 340 260 1330 2x 200 18

WT 087-11 1650 x 900 x 500 1530 x 780 x 340 290 1330 2x 200 14/18

WT 087-12 1520 x 500 x 500 1400 x 370 x 330 200 1250 150 6

WT 087-20 1650 x 770 x 600 1530 x 650 x 440 250 1320 2x 200 7/11

WT 087-22 1800 x 770 x 600 1680 x 650 x 440 280 1300 2x 370 7/11

Multi-walled safe. Especially strong construction. Corpus 60 mm, 3-walled door, 105 mm. Lock area drillproof. 3-sided bolt locking device, as well as solid bolts and rear grip bands on the hinge side. Door opening angle 180°. Surrounding fire fold. Fire protection insulation.WT 087-01: 7 rifle stands + 3 shelves, partition wall, rifle stand rails with 4 additional stands.WT 087-02: 2 separate safe doors that close individually! Left safe: 16 rifle stands, of which 9 are on the rear wall, 7 on the swivel wall. 1 interior safe 200 mm. Right safe: 3 shelves, 2 separate interior safes of folder height, each 360 mm. WT 087-03: 9 rifle stands on rear wall, 2 each left and right. WT 087-04: 6 rifle stands on rear wall, partition wall, right space for 3 shelves. WT 087-08: 15 stands on rear wall, 2 each on side walls. WT 087-09: 10 rifle stands on rear wall, 2 on left side wall, partition wall, right space for 3 shelves or 4 more rifle stands. WT 087-10: 14 rifle stands on rear wall, 2 each on left and right. WT 087-11: as WT 087-10, but with detachable partition wall and 3 shelves


9



WT 087-01

WT 087-02

WT 087-12

WT 087-04WT 087-10WT 087-11

includes cleaning brush stand and 3 door compartments

HARTMANN RIFLE CABINETS SERIES WT 087 Door triple-walled and corpus double-walled - fire protection insulation Insurance rating private €1,000*and commercial €2,500*

2x 360 1x 200

WT 087-03

with 3 separate interior safes

Now also


in S2

WT 250-01

with a door thicknessof 105 mm!



Resistance grade N (0)

10

WT 250-04

WT 250-22

HARTMANN RIFLE CABINET SERIES WT 250with VdS testing label. Door and corpus four-walled - fire protection insulationInsurance rating private up to €40,000* and commercial €10,000*

HARTMANN Rifle cabinets meet the new guidelines. The tested series constructionWT 087 (security level B) is also offered as series WT 250 in class N (0) with theVdS test label. With the same interior and exterior dimensions the weights increase because of the reinforced wall and door construction. Many extras make these series additionally interesting, for example, external door hinges that facilitate door removal and thus ease trans-port over steps and removals in general (as especially in the case of the 2-door cabinets).

WT 250-20 /-22is available as swivel wall safe

with up to 20 rifle stands

Resistance grade N (0) according to EN 1143-1, VdS 2450


Interior dimensions(h x w x d) mm

Weight (in kg)

Adjustable height (in mm)

Rifle stands

Interior safe(height in mm)

Shelves

WT 250-01 1650 x 770 x 500 1530 x 650 x 340 340 1330 7/11 2 x 200 3

WT 250-02.1/.2 1650 x 1350 x 600 à 1530 x 555 x 430 à 342,5 1330 9/7 200/ 2x 360 4

WT 250-03 1500 x 700 x 500 1380 x 580 x 340 290 1230 13 150 -

WT 250-04 1500 x 700 x 500 1380 x 580 x 340 290 1230 6 150 3

WT 250-07 1650 x 640 x 500 1530 x 520 x 340 295 1280 8 250 1

WT 250-08 1600 x 990 x 550 1480 x 870 x 390 450 1280 19 200 -

WT 250-09 1600 x 990 x 550 1480 x 870 x 390 430 1280 12/16 200 3

WT 250-10 1650 x 900 x 500 1530 x 780 x 340 370 1330 18 2x 200 -

WT 250-11 1650 x 900 x 500 1530 x 780 x 340 360 1330 12/18 2x 200 3

WT 250-12 1520 x 500 x 500 1400 x 370 x 330 232 1250 6 150 -

WT 250-20 1650 x 770 x 600 1530 x 650 x 440 365 1320 7/11 2x 200 3

Rifle stand with small swivel wall with/without shelf component: 12/16

Rifle stand with large swivel wall: 20

WT 250-22 1800 x 770 x 600 1680 x 650 x 440 420 1300 7/11 2x 370 3



WT 250-24 1500 x 750 x 500 1380 x 620 x 330 300 1380 9 - 3

Multi-walled safe. Especially strong construction. Corpus 60 mm, 3-walled door, 105 mm. Lock area drillproof. 3-sided bolt locking device and solid bolts and rear grip bands on the hinge side. Door opening angle 180°. Surrounding fire fold. Fire protection insulation. DIN 4102. WT 250-01: 7 Rifle stand + 3 shelves, partition wall, as well as 4 more rifle stands. 2 interior safes, each one 200 mm. WT 250-02: 2 separately closing safe doors, left safe: 16 rifle stands, of which 9 on rear wall and 7 on swivel wall. Interior safe 200 mm. Right safe: 3 compartment shelves, 2 separate interior safes at folder height, each one 360 mm. WT 250-08: 15 stands on rear wall, 2 each on side walls. WT 250-09: 10 rifle stands on rear wall, 2 on left side wall, partition wall, right space for 3 compartment shelves or 4 more rifle stands. WT 250-10: 14 rifle stands on rear wall, 2 each on left and right. WT 250-11: as WT 250-10, but with detachable partition wall and three shelves. WT 250-24: with 9 rifle stands, adjustable height compartment shelves above the weapons area and spacious shelf area with 3 adjustable compartment shelves; 3 door compartmentsand cleaning brush stand. Now also

in LFS 30 Ptested & certified

according to EN 15659

Resistance grade N (0)

11WT 250-12 WT 250-10

WT 250-08

WT 250-09

WT 250-02

WT 250-02.1/.2available with either screw or welded design

WT 250-24

Resistance gradeaccording to EN 1143-1, VdS 2450

New: Mini VdS N (0) cabinet

WT 250-07



Interior dimensions(h x w x d) mm

Weight (in kg)


Rifle stands

Interior safe(height in mm)

Shelves

WT 250-01 1650 x 770 x 500 1530 x 650 x 340 340 1330 7/11 2 x 200 3

WT 250-02.1/.2 1650 x 1350 x 600 à 1530 x 555 x 430 à 342,5 1330 9/7 200/ 2x 360 4

WT 250-03 1500 x 700 x 500 1380 x 580 x 340 290 1230 13 150 -

WT 250-04 1500 x 700 x 500 1380 x 580 x 340 290 1230 6 150 3

WT 250-07 1650 x 640 x 500 1530 x 520 x 340 295 1280 8 250 1

WT 250-08 1600 x 990 x 550 1480 x 870 x 390 450 1280 19 200 -

WT 250-09 1600 x 990 x 550 1480 x 870 x 390 430 1280 12/16 200 3

WT 250-10 1650 x 900 x 500 1530 x 780 x 340 370 1330 18 2x 200 -

WT 250-11 1650 x 900 x 500 1530 x 780 x 340 360 1330 12/18 2x 200 3

WT 250-12 1520 x 500 x 500 1400 x 370 x 330 232 1250 6 150 -

WT 250-20 1650 x 770 x 600 1530 x 650 x 440 365 1320 7/11 2x 200 3



WT 250-22 1800 x 770 x 600 1680 x 650 x 440 420 1300 7/11 2x 370 3



WT 250-24 1500 x 750 x 500 1380 x 620 x 330 300 1380 9 - 3

Multi-walled safe. Especially strong construction. Corpus 60 mm, 3-walled door, 105 mm. Lock area drillproof. 3-sided bolt locking device and solid bolts and rear grip bands on the hinge side. Door opening angle 180°. Surrounding fire fold. Fire protection insulation. DIN 4102. WT 250-01: 7 Rifle stand + 3 shelves, partition wall, as well as 4 more rifle stands. 2 interior safes, each one 200 mm. WT 250-02: 2 separately closing safe doors, left safe: 16 rifle stands, of which 9 on rear wall and 7 on swivel wall. Interior safe 200 mm. Right safe: 3 compartment shelves, 2 separate interior safes at folder height, each one 360 mm. WT 250-08: 15 stands on rear wall, 2 each on side walls. WT 250-09: 10 rifle stands on rear wall, 2 on left side wall, partition wall, right space for 3 compartment shelves or 4 more rifle stands. WT 250-10: 14 rifle stands on rear wall, 2 each on left and right. WT 250-11: as WT 250-10, but with detachable partition wall and three shelves. WT 250-24: with 9 rifle stands, adjustable height compartment shelves above the weapons area and spacious shelf area with 3 adjustable compartment shelves; 3 door compartmentsand cleaning brush stand. Now also

in LFS 30 Ptested & certified


Resistance grade VdS N (0)

12

Resistance grade N (0)according to EN 1143-1, VdS 2450

HARTMANN RIFLE CABINET SERIES WTS with VdS test label. Door four-walled and corpus triple-walled - fire protection insulation Insurance rating private up to €40,000* and commercial €10,000*

Fortified cabinet of the new generation! The VdS standard guarantees defined security. Detailed tests and rigorous burglary attemp-ts are performed at a Testing Institute of the VdS Schadenverhütung GmbH before produc-tion, which is itself in turn subjected to constant external quality control.The series WTS 1204 to WTS 1504 are known for their particularly strong construction. The 12 mm thick four-walled special door and the triple-walled corpus guarantee the highest level of security.




eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

WTS 1102 1600 x 700 x 540 1450 x 550 x 340 300 1450 - 6+3

WTS 1204 1500 x 550 x 500 1350 x 400 x 300 230 1200 150 7

WTS 1304 1500 x 750 x 550 1350 x 600 x 350 300 1200 150 7/10

WTS 1404 1700 x 750 x 550 1550 x 600 x 350 330 1200 350 7/10

WTS 1504 1650 x 800 x 540 1500 x 650 x 340 330 1250 2 à 250 8/11

Steel cabinet with triple-walled corpus and integrated slot profile reinforcements. Door four walled, 125 mm thick. Additional security in the lock area through bulletproof plates.Bolt locking device. Door opening angle 180°. 1 interior safe with 150 mm high. Cleaning brush stand WTS 1102 with 3 adjustable shelves, 3 door storage compartments and cleaning brush stands. The partition wall is fixed. WTS 1304/1404 with 7 plus 3 rifle stands and 3 adjustable compartment shelves. 2 rails with 7 and 3 rifle stands, which can easily be fixed to the rear wall, and a total of three shelf floors are included in delivery. The partition wall is detachable. WTS 1304/1404 also have 3 door storage compartments and cleaning brush stands. Device for fixing to the floor. WTS 1504 with 8 plus 3 rifle stands, all other features like models WTS 1304/1404

WTS 1304

With special door, 125 mm thick

WTS 1204

WTS 1504



WTS 1102

Bolt thickness, 35 mm

Resistance grade I

Special features Locking variants Mechanical combinationlock


WT 285-12

WT 285-12 /-14available as a swivel wall safe with up to 19 rifle stands

WT 285-14

13

WT 285with four-walled, 125 mm thick special door.

HARTMANN RIFLE CABINETS SERIES WT 285Insurance rating private up to €65,000*, commercial up to €20.000*

Resistance grade I according to EN 1143-1, VdS 2450



eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

WT 285-12 1580 x 780 x 630 1430 x 630 x 420 415 1250 180 6/10

Rifle stand with swivel wall with/without shelf component: +5/+9

WT 285-14 1880 x 780 x 630 1730 x 630 x 420 450 1330 400 6/10

Rifle stand with swivel wall with/without shelf component: +5/+9

Fortified cabinet, completely multiwalled. Special filling. Door thickness 125 mm. 3-sided bolt locking device, bolt diameter 35 mm, newly developed rear grip bolts,side walls 75 mm. High security lock. Fittings: external door hinges, door opening angle 180°. As a result of the extremely thick wall and door constructions, the exterior dimensions are relative to the superstructures of the door and wall. WT 285-12 with interior safe 180 mm high. WT 285-14 with 400 mm high interior safe. WT 285-12 and WT 285-14 with detachable partition wall for later refitting of more rifle storage. WT 285-12/-14 can be upgraded with additional swivel wall to +5/+9 rifle stand. Device for fixing to the floor.

For especially high security demands.The model series WT 285 is a particularly strong construction with an extra thick door and walls and has an additional swivel wall. It can be upgraded to as many as 19 rifle stands.

WT 270-01

Door security viaespecially strongrear grip bands

Resistance grade I

14

with 105 mm door thickness!

WT 270-01

WT 270-12



Int. dimensions(h x w x d) mm

Weight (in kg)


Interior safe(Height in mm)

Riflestands

Shelves

WT 270-01 1650 x 770 x 500 1530 x 650 x 335 360 1330 2 x 200 7/11 3

WT 270-02.1/.2 1650 x 1350 x 600 à 1530 x 555 x 435 à 360 1330 200/ 2 x 360 9/7 4

WT 270-03 1500 x 700 x 500 1380 x 580 x 335 310 1230 150 13 -

WT 270-04 1500 x 700 x 500 1380 x 580 x 335 320 1230 150 6 3

WT 270-07 1650 x 640 x 500 1530 x 520 x 335 320 1280 250 8 1

WT 270-08 1600 x 990 x 550 1480 x 870 x 385 450 1280 200 19 -

WT 270-09 1600 x 990 x 550 1480 x 870 x 385 465 1280 200 12/16 3

WT 270-10 1650 x 900 x 500 1530 x 780 x 335 410 1330 2 x 200 18 -

WT 270-11 1650 x 900 x 500 1530 x 780 x 335 395 1330 2 x 200 12/18 3

WT 270-12 1520 x 500 x 500 1400 x 370 x 335 247 1250 150 6 -

WT 270-20 1650 x 770 x 600 1530 x 650 x 435 402 1320 2 x 200 7/11 3


Rifle stand with large swivel wall : 20

WT 270-22 1800 x 770 x 600 1680 x 650 x 440 445 1300 2 x 370 7/11 3

Rifle stand with small swivel wall with/without shelf component : 12/16

Rifle stand with large swivel wall : 20

Multi-walled safe. Very strong construction. Corpus 60 mm, 3-walled door, 105 mm thick. Lock area drillproof against drilling, milling and cutting tools. 3-sided bolt locking device, solid rear grip band on the hinge side. Door opening angle 180°. Surrounding fire fold. Fire protection insulation. WT 270-01: 7 rifle stands, 3 compartment shelves, partition wall, 4 more stands on rails, 2 interior safes, each one 200 mm. WT 270-02: 2 separately closing safe doors. Left safe: 16 rifle stands, of which 9 are on the rear wall and 7 on the swivel wall. Interior safe 200 mm. Right safe: 3 shelves, separate interior safes at folder height, 360 mm. WT 270-08: 15 rifle stands on rear wall and 2 each on side walls. WT 270-09: 10 rifle stands on rear wall, 2 on left side wall, detachable partition wall, right space for 3 compartment shelves or 4 more rifle stands.WT 270-10: 14 rifle stands on rear wall, 2 each left and right. WT 270-11: as WT 270-10, but with detachable partition wall and 3 shelves. Colour: Figs show the special colour RAL 5003 sapphire blue (Figs above with silver-coloured marbling).

HARTMANN RIFLE CABINETS SERIES WT 270Insurance rating private up to €65,000*, commercial up to €20,000*

Fortified cabinets of the new generation! The VdS standard guarantees defined security: detailed tests and rigorous burglary attempts are performed at a Testing Institute of the VdS Schadenverhütung GmbH before production, which itself in turn is subject to constant external quality control. The series WT 270 is known for meeting these especially high security demands. In terms of measurements (reflected in the figs) it is of similar construction to the series WT 087 (security level B) and WT 250 (resistance grade N (0)), but heavier.

New: MiniVdS I

cabinet

WT 270-20 /-22available as swivel-wall safe

with up to 20 rifle stands

NOW ALSOin LFS 30P




HARTMANN RIFLE CABINETS SERIES WT 297/WT 298WT 297: Insurance rating private up to €65.000,-*, commercial up to €20.000,-* WT 298: Insurance rating private up to €100.000,-*, commercial up to €50.000,-*

Resistance grade I according to EN 1143-1, VdS 2450 + S 60 P according to EN 1047-1



eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

WT 297-01 1510 x 705 x 470 1420 x 605 x 340 365 1250 170 6/11

Resistance grade II according to EN 1143-1, VdS 2450 + S 60 P according to EN 1047-1

Model

WT 298-01 1528 x 710 x 493 1389 x 574 x 316 520 1250 140 6/11

Fortified cabinet, completely multiwalled and fireproof. Door and corpus solid with special hard con-crete filling, total door thickness 105 mm. 4-sided bolt locking device that grips in a high-security locking band. Special sealing band against fire gases, extinguishing water and heat development. 6 plus 5 rifle stands and 3 plus 3 shelves. Also included are 2 rails with 1 x 6 and 1 x 5 rifle stands that can easily be fixed to the rear wall and a total of 6 shelves. The partition wall is fixed. There are various possibilities of space division (see photos below). This cabinet is available in VdS class I + VdS class II. WT 297-01: interior safe 170 mm high. WT 298-01: interior safe 140 mm high.

HARTMANN TRESORE presents rifle cabinets that are VdS tested and fire protection tested. 2 security standards: tested burglary and fire protection.Burglar-proof according to VdS 2450. Resistance grade I and II Important: VdS recognized safes must satisfy certain criteria (see page 3). Fire-proof quality grade S 60 P according to EN 1047-1The safe series has passed the fire test of the Technical University of Braunschweig. The series was flame tested at a max. temperature of 1090 °C for over 60 minutes and sub-jected to a drop test while still in a hot condition.

Resistance grade I + S 60 PII + S 60 P

WT 297-01 / WT 298-01

WT 297-01WT 298-01

WT 297-01 and WT 298-011 cabinet with 4 possible variants

15

with tested fire protection

Fire protection 60 minutes

tested fire protection



HARTMANN RIFLE CABINET SERIES WT 300 WT 300: Insurance rating private up to €65.000,-*, commercial up to €20.000,-* WT 310: Insurance rating private up to €100.000,-*, commercial up to €50.000,-*

Fortified cabinets of the new generation! The VdS standard guarantees: The safe is type-tested and has a precisely defined resi-stance value (RU = resistant unit). Before the safe prototype fulfills the VdS standard, it is subjected to detailed tests and rigorous burglary attempts at a Testing Institute of the VdS Schadenverhütung GmbH. When it goes into production, it is subjected to constant external quality control. VdS recognized safes have to satisfy the following demands:- Type testing at a VdS recognized Testing Institute. - Resistance to clearly more aggressive perceived threats according to Europe-wide guidelines. - Locking system with 50% higher resistance value. - Only tested, VdS listed high security locks may be used.

Resistance grade I + S 120 PII + S 120 P

WT 300-05WT 310-05

16

WT 300-06WT 310-06

Resistance grade I according to EN 1143-1, VdS 2450 + S 120 P according to EN 1047-1



eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

WT 300-05 1800 x 800 x 550 1508 x 654 x 331 730 1315 200 10

WT 300-06 1800 x 1400 x 550 1515 x 1255 x 350 1025 1315 2x 200 17

Resistance grade II according to EN 1143-1, VdS 2450 + S 120 P according to EN 1047-1

Modell

WT 310-05 1811 x 821 x 573 1500 x 649 x 331 774 1293 200 10

WT 310-06 1821 x 1377 x 573 1505 x 1205 x 331 1139 1305 2x 200 17

Fortified cabinet, completely multiwalled. Door and corpus solid with special hard concrete filling. 4-sided bolt locking device with a total of 12 or 20 bolts that grip in a high security locking band. Special sealing bands against fire gases, extinguishing water and heat development.

Tested fire protection After a flame period of 60 or 120 minutes at a max. tempe-rature of 1090° C the safe is subjected to a drop test while still in a hot condition from a height of 9.15 m. Only after the prototype has passed the test does the safe series receive the test label according to EN 1047-1.

S 60 P and S 120 P according to EN 1047 - 1 Fireproof rifle cabinets tested fireproof at the TU Braunschweig. Flame period of one hour (S 60 P) or two hours (S 120 P) at a max. temperature of 1090° C, follo-wed by drop test.



WTS 060 Seriesfor the safekeeping of several short weapons

HARTMANN SHORT WEAPONS LOCKERS WTS 060-01

For the safekeeping of short weapons and ammunition, the locker unit has over 7 com-partments that can be locked and one open compartment. The doors of the compartments that can be locked are equipped with double-bit security locks. As a module construction, the locker can be extended by 7 compartments to 14, 21, 28, 35 etc.

Without a security level, it has been conceived for use in buildings or building sections with access control or appropriately secured weapons rooms. The system, combined with or built into a certified security cabinet of EN 14450, offers protection conforming to the law outside these areas.

HARTMANN SHORT WEAPONS LOCKERS

17

WTS 060-01

Short weapons locker unit

ModelExt. dimensions

(h x w x d) mmInt. dimensions(h x w x d) mm

Weight (in kg)

Lockers

WTS 060-01 1700 x 315 x 233 1680 x 300 x 220 60 7

Interior dimensions of the compartments: 200 x 290 x 170 (h x w x d) mm

Locker units integrated into a security cabinet according to EN 14450



WS 165-02/18WS 175-02/18

WS 165 / 175 with extra solid,

105 mm thick doorResistance grade N (0) according to EN 1143-1, VdS 2450

ModelExt. dimensions(h x w x d) mm


Weight(in kg)

Rifle stands/shelves

WS 165-01 670 x 500 x 560 530 x 380 x 400 130 6/2

WS 165-01/12 670 x 500 x 560 550 x 380 x 400 130 12/1

WS 165-02 870 x 500 x 560 750 x 380 x 400 154 6/2

WS 165-02/12 870 x 500 x 560 750 x 380 x 400 154 12/3

WS 165-02/18 870 x 500 x 560 750 x 380 x 400 154 18/3


Model

WS 175-01 670 x 500 x 560 530 x 375 x 400 143 6/2

WS 175-01/12 670 x 500 x 560 530 x 375 x 400 143 12/1

WS 175-02 870 x 500 x 560 750 x 375 x 400 174 6/2

WS 175-02/12 870 x 500 x 560 750 x 375 x 400 174 12/3

WS 175-02/18 870 x 500 x 560 750 x 375 x 400 170 18/3

Construction: corpus and door multi-walled, door thickness 105 mm, all-round heavy armou-ring, 4-sided bolt locking device system, door with additional armouring against drilling, milling and cutting tools. Fittings: external door hinges, door opening angle 180°, double-bit security lock, 2 keys, pivoted flap grip, special rifle stand for short weapons up to 400 mm long. Optional: electronic combination lock, interior safe

HARTMANN SHORT WEAPONS SAFES

For cabinets with the resistance grade N (0) and I, long weapons, short weapons and ammunition may be kept together, without a partition in the form of an interior safe!

18


ModelExt. dimensions(H x B x T) mm

Int. dimensions(H x B x T) mm W

eight

(in k

g)

Inte

rior s

afe

(Höh

e in m

m)

Shelv

es

K 102-01 175 x 310 x 235 100 x 235 x 155 14 - -

K 102-06 K 610 x 430 x 400 546 x 366 x 300 66 260 1

K 102-07 K 810 x 430 x 400 745 x 365 x 300 82 360 2

K 102-51 K 285 x 450 x 380 205 x 380 x 290 35 100 -

Double walled. Bolt locking device. Door opening angle 90°. Anchoring holes in the rear wall and/or in the floor.

WS 165-02WS 175-02

WS 165-01WS 175-01

HARTMANN SHORT WEAPONS SAFES SERIES K 102 K Insurance rating private €1,000*and commercial €2,500*Keep your handguns in the lockable interior safe, separate from your ammunition.

K 102-07 K

K 102-51 K K 102-06 K

HARTMANN SHORT WEAPONS SAFES SERIES WS 165/WS175 WS 165: Insurance rating private up to €40.000*, commercial up to €10.000* WS 175: Insurance rating private up to €65.000*, commercial up to €20.000*

NOW ALSO

inS2tested & certified


K 102-01

Series WS 125 for safekeeping youramunition reserves

HARTMANN AMMUNITION SAFES

19

Special features Locking variants Mechanical combinationlock


WS 125-04 WS 125-05 WS 125-06WS 125-07

WS 125-01 WS 125-03

HARTMANN AMMUNITION SAFES SERIES WS 125Security level A according to VDMA 24992** Insurance rating private €1,000*and commercial €2,500*


ModelExt. dimensions(h x w x d) mm


Weight(in kg)

Vriable heightshelves

WS 125-01 600 x 380 x 450 594 x 374 x 387 42 1

WS 125-02 600 x 640 x 450 594 x 634 x 387 61 1

WS 125-03 850 x 640 x 450 844 x 634 x 387 80 1

WS 125-04 1406 x 250 x 366 1400 x 244 x 303 81 3

WS 125-05 1406 x 380 x 366 1400 x 374 x 303 82 3

WS 125-06 1406 x 510 x 366 1400 x 504 x 303 104 3

WS 125-07 1406 x 640 x 366 1400 x 634 x 303 122 3

Construction: corpus single walled, door double walled, door leaf solid, drillproof and bullet-proof plate in the lock area, bolt locking device. Finishing: interior door hinges, double-bit security lock, 2 keys, adjustable height shelf components. Optional: interior safe, electronic combination lock.


ModelExt. dimensions(H x B x T) mm

Int. dimensions(H x B x T) mm W

eight

(in k

g)

Inte

rior s

afe

(Höh

e in m

m)

Shelv

es

K 102-01 175 x 310 x 235 100 x 235 x 155 14 - -

K 102-06 K 610 x 430 x 400 546 x 366 x 300 66 260 1

K 102-07 K 810 x 430 x 400 745 x 365 x 300 82 360 2

K 102-51 K 285 x 450 x 380 205 x 380 x 290 35 100 -

Double walled. Bolt locking device. Door opening angle 90°. Anchoring holes in the rear wall and/or in the floor.



HARTMANN TRESORE

HARTMANN WEAPONS ROOM DOORS

guarantee optimal pro-tection for entire rooms



in line with security level B according to VDMA standard form 24992

ModelWall cutout dimensions

(h x w) mmFrame dimensions (h x w x d) mm

Door passage dimensions (h x w) mm

Weight(in kg)

HPT 1 1800 x 880 1835 x 930 x 240 1730 x 750 180

HPT 2 1800 x 1000 1835 x 1050 x 240 1730 x 870 195

HPT 3 2000 x 880 2035 x 930 x 240 1930 x 750 195

HPT 4 2000 x 1000 2035 x 1050 x 240 1930 x 870 215


Modell ✪ Series HPTVB: The door is also filled with special concrete

HPTV 5 HPTVB 5✪ 1800 x 880 1795 x 870 x 240 1685 x 710

225340

HPTV 6 HPTVB 6✪ 1800 x 1000 1795 x 990 x 240 1700 x 830

245375

HPTV 7HPTVB 7✪ 2000 x 880 1995 x 870 x 240 1885 x 710

240365

HPTV 8HPTVB 8✪ 2000 x 1000 1995 x 990 x 240 1900 x 830

260405

Resistance grade II according to EN 1143-1, VdS 2450

Model

HPTII 2111 - 2115 x 1100 1964 x 878 800

Resistance grade III according to EN 1143-1, VdS 2450

Model

HPTIII 2111 - 2115 x 1100 1964 x 878 850

HARTMANN WEAPONS ROOM DOORS provide optimal protection for entire rooms or sections of buildings. Everywhere where extensive collections of rifles or large amounts of ammunition have to be kept safe and in conformity with the law. Rifle rooms with appropri-ately tested doors are a comfortable solution. In accordance with your individual requirements, we supply doors of various dimensions and 4 different security levels right up to VdS-tested and certified doors with resistance grade VdS III.

20

HPT 4

Example installation HPT 4

Available in many security levels!

HARTMANN WEAPONS ROOM DOORS made to measure


21

HPT II & III

HPT Series: Construction: double-walled safe room door, total door thickness 75 mm, solid bolt locking device system. Fitting: the frame is serial production with wall tie bolts to be secured within a brick or concrete wall.HPTV and HPTVB Series: Construction: 4-walled safe room door, total door thickness 110 mm, solid bolt locking device system, very strongly constructed rear grip rails on the hinge side along the entire length of the door, drillproof and bulletproof plate in the lock area. Fitting: the frame is serial production, equipped with bore holes and tie bolts. According to choice, it can be poured in concrete or secured to an existing wall. HPTII and HPTIII Series: Construction: door leaf and door frame flush on the outside, floor frame with max. 15 mm high threshold, total door thickness 152 mm, compact material thickness in front of the locks, including special filling with reinforcement and armouring 60 mm, sold bolt locking device system. Fitting: Door frame is partly concrete and has to be poured precisely with the wall. Prepared in serial production for an EMA system. All models: locking with double-bit security lock (incl. 2 keys), door opening angle 180°, DIN right hinged door.

HARTMANN ROOM-WITHIN-ROOM SYSTEMS

HARTMANN strongrooms offer reliable security in any location where a safe is unable to provide the space required. It therefore serves as an ideal archive or as a safe storage solution for the compliant storage of medication and arms.

HARTMANN strongrooms are constructed in a modular design. The height, width and depthof the door and locking system can be selected based on personal preference. The stron-grooms can be assembled as a separate unit or as part of an adjustable room-within-room system in a given room.

The modular design also offers some more benefits:• The system components are compact and therefore very lightweight. They are assembled on site and then welded together for extra security.• The walls consist of individual panels. This allows the strongroom to be extended over time or disassembled in the event of relocation.HARTMANN strongrooms, including the doors, have been tested and certified theft-proof according to EN 1143-1. They are also available in different resistance grades.The strongroom door can optionally be fitted with components ready for connection to an alarm system.

Example installation HPTV 8/HPTVB 8

HARTMANN WEAPONS ROOM made to measureIf you require dimensions not listed here, we will provide you with a fair quote for your individual requirements.

Modular design – practical and flexible

Available in all sizes and in different

resistance grades

with decorative interior lighting

22

HARTMANN BULLETPROOF GLASS RIFLE CABINETS

with decorative interior lighting

HARTMANN BULLETPROOF GLASS RIFLE CABINETS SERIES HTESecurity Level S1: Insurance rating private €5,000*and commercial €2,500*Security Level S2: Insurance rating private €30,000*and commercial €2,500*

The bulletproof glass rifl e cabinets in a natural wooden look are part of HARTMANN TRESORE’s Exclusive Line.

Large bulletproof glass panes in the door – also available on the sides according to model type – as well as appropriate interior lighting show your collection, rifl es or other exhibits in their best light.

The high value security cabinets are certifi ed according to the strict European Standard

EN 14450.

Exclusive Line




Weight (in kg)

Riffle stands

Shelves

HTE 111-01/B 1500 x 525 x 350 1480 X 475 X 260 125 8 1


HTE 104-01/B 1700 x 525 x 348 1660 x 440 x 260 145 7 1

HTE 104-02/B 1700 x 674 x 413 1660 x 590 x 322 181 10 1

HTE 105-01/B 1900 x 820 x 460 1860 x 726 x 372 240 13 1

HTE 106-01/B 1900 x 1220 x 460 1860 x 1126 x 372 386 20 1

HTE 106-02/B 1900 x 1220 x 460 1860 x 1056 x 372 386 19 1

HTE 107-01/B 1700 x 910 x 640* 1660 x 750 x 530* 205 8 1

*Side length *Side length

HTE 108-01/B 1700 x 820 x 460 1660 x 686 x 372 221 12 1

When chosing optional interior lighting, the compartment shelf in models HTE 105-01/B to HTE 107-01/B is omitted.

HTE 106-02 B

HTE 106-01 B

interior lighting

HTE 106-02 B

Exclusive Line

HTE 106-01 BHTE 106-01 BHTE 106-01 B

Imag

e with

optio

ns

HARTMANN BULLETPROOF GLASS RIFLE CABINETS

23Exclusive Line

HTE 107-01 B

Example installation HTE 105-01 B

Electronic lock Series HTE

HTE 111-01 B

Einrichtungsbeispiel Präsentationswand

Bulletproof glass rifle cabinet as a corner unit

HTE 104-01 B HTE 105-01 B

Exclusive LineOn 30.06.2003 the VDMA issued the following press release:

„According to the April 2002 publication of the European Standards Bill prEN 14 450 ‚Security cabinets‘, the standard form 24 992 (building regulation for security levels A and B) no longer represents state of the art technology and will therefore be withdrawn by the VDMA as publisher on 31. December 2003 without replacement.“ It goes on to state: „In the European Regulations prEN 14 450 and EN 1143-1, the destructive testing type of security cabinets S1 and S 2 as well as fortified cabinets of the resistance grade 0 and I is regulated.“

This means that security and fortified cabinets according to EN 14 450 or EN 1143-1 are subject to fixed testing, certification and quality assurance procedures by the ECB•S and other recognized testing and certification centres. Adherence to security levels A and B on the other hand, will no longer be monitored from 2004 onwards.

24

HARTMANN BULLETPROOF GLASS CABINETS

Exclusive Line

HARTMANN BULLETPROOF GLASS CABINETS SERIES HTEInsurance rating private €30,000*and commercial €2,500*




Weight (in kg)

Riffle stands

Shelves

HTE 104-01/A 1700 x 525 x 348 1660 x 440 x 260 145 - 4

HTE 104-02/A 1700 x 674 x 413 1660 x 590 x 322 181 - 4

HTE 105-01/A 1900 x 820 x 460 1860 x 726 x 372 240 - 4

HTE 107-01/A 1700 x 910 x 640* 1660 x 750 x 530* 205 - 4

*Side length *Side length

HTE 108-01/A 1700 x 820 x 460 1660 x 686 x 372 237 - 4

The bulletproof display cabinets are furnished with glass floors which make them ideal for safekeeping exclusive exhibits

HTE 108-01 A

With decorative interior lighting

HTE 108-01 Awith side glazing

Interior area upholstery in green, red or grey.

HARTMANN COLOUR SAMPLE - safe corpus/interior

You can choose your rifle or display cabinet colour or wooden finish to best suit your surroundings. You have a choice of the following

Walnut look Root wood look Beige

Oak look (light) Maple look Dark grey

Black White Red

Cherry wood look (dark) Green

You may choose the colour that you wish!

Exclusive Line

Safe corpus Interior

HTE 107-01 B

HARTMANN BULLETPROOF GLASS CABINETS SERIES HTEInsurance rating private €30,000*and commercial €2,500*

HARTMANN OAK CABINETS

25Exclusive Line

Stain samples

We customize your personal oak cabinet to the size you require

HARTMANN OAK CABINET SERIES WT 181

Choose a rifle cabinet from our extensive range and have your own custom-made oak cabinet made to go along with it. The front, the upper and lower cornices and the front round feet are solid oak. The sides of the cabinet are semi-solid. The door and and sides are made in a framework construction with rounded edges. The sides of the front view have three flutings to the right and left.The grooved door panels are available smooth or with 6 different hand-carved motifs (see selection below). Instead of having the oak leaf in the middle you can also have your own monogram carved. We can accommodate your taste and requirements regarding the colour or the stain (oak, light, dark, brushed, waxed etc.) and the size of your oak cabinet (one door or two). Give your cabinet an unmistakeable and individual appearance!

Wood grouseStag

PhesantDuck

DuckWild boar

Motif 1

Motif 2

Motif 3

Motif 4

Motif 5

Motif 6

Oak leaf (alternative monogram)

HARTMANN COLOUR SAMPLE - safe corpus/interior

Exclusive Line

VdS N (0)Cabinet

HTE 155-01

26

HARTMANN SOLID WOODEN RIFLE CABINETS Resistance grade N (0)

HARTMANN SOLID WOODEN RIFLE CABINETS SERIES HTE 155Resistance grade N (0) according to EN 1143-1, VdS 2450Insurance rating private €40,000*and commercial €10,500*

We supply exclusive display cabinets and rifle cabinets that enable our customers to keep and present fine hunting and collectors‘ rifles in accordance with the strict regulations of the German Weapons Law.

HARTMANN SOLID WOOD RIFLE CABINETS are certified according to EN 1143 - 1 resistance grade N (0) and are thus suitable for the safekeeping of long weapons, short weapons and ammunition.

Our display cabinets are crafted as individual items in a tradition based on manual skills. In addition to the standard dimensions we can also supply variations in size.The integration of this rifle cabinet system into an existing cabinet wall is also possible.


ModelExt. dimensions approx.*


Weight (in kg)

Riflestands

N° ofdoors

HTE 155-01 2050 x 900 x 650 2050 x 600 x 600 450 9 1

HTE 155-02 2050 x 1300 x 650 2050 x 1200 x 600 600 14 2

* The final dimensions are obtained by the individual design of corpus and cornice.

Exclusive Line

Available in the following woods: Cherry, oak, beech, maple or birch, either natural or varnished.Special stains, coloured varnishes or other surface treaments are also available on request.

HARTMANN SOLID WOODEN RIFLE CABINETSResistance grade N (0)

27Installation example HTE 155-02

Secure and impressive for your finest weapens

HTE 155-02

Interior fittings can be

customized according to individual

wishes! The HARTMANN HTE 155 is the only solid wooden rifle cabinet with

VdS approval!

HARTMANN SOLID WOODEN RIFLE CABINETS SERIES HTE 155Resistance grade N (0) according to EN 1143-1, VdS 2450

The basic construction of the cabinet is solid oak. It comes with integrated security equipment of stainless steel and multi-layered special bulletproof glass. The equally solid wooden surface (visible areas) can be produced from various woods. The standard varnishing of the rifle cabinet is clear varnish. This way the surfaces of the wood used appear in their natural colour. Special stains, coloured varnishes or other surface treatments are also available on request.

The standard display cabinets have, according to size, 2 or 4 drawers and halogen interiorlighting integrated into the ceiling. The rifle stands can, according to the desired number of the rifles to be installed, be varied individually. The cabinet can be adjusted to accomodate additional storage area, for example, for short weapons. Further options, such as velvet upholstery or special interior space design using mirrors, are also available.

As an alternative to security glass, the side walls of the display cabinet can be equipped with an appropriate wooden filling. Rear glazing of the cabinet is also possible. A display cabinet standing detached in the room can thus be viewed from all sides.

In the case of exclusive solid wooden rifle cabinets, we meet the special requirements of thecustomer in terms of equipment and design!

Exclusive Line

28

SERIES HT-REM 049Resistance grade I according to EN 1143-1, VdS 2450Insurance rating private €65,000*and commercial €20,000*

Technical data Multi-walled safe of an especially strong construction Door leaf 3 mm thick Total door thickness 105 mm Door opening angle 180° Four-sided locking DIN right-hinged door Fixture for floor anchoring Rifle height 1330 mm

Standard equipment Interior safe 230 mm high With up to 17 rifle stands (see dimensions table) Cleaning brush holder Detachable partition wall and height-adjstable compartment shelves

(from model -02)

Locking Electronic lock with star-shaped handle

by HARTMANN TRESORE

Exclusive Line

Picture similar

in LFSaccording to EN 15659

29

by HARTMANN TRESORE

SERIE HT-REM 047Resistance grade N (0) according to EN 1143-1, VdS 2450Insurance rating private €40,000*and commercial €10,000*

Technical data Multi-walled safe with special filling Door leaf 3 mm thick Total door thickness 105 mm Door opening angle 180° Four-sided locking DIN right-hinged door Fixture for floor anchoring Rifle height 1330 mm

Standard equipment Interior safe 230 mm high With up to 17 rifle stands (see dimensions table) Cleaning brush holder Detachable partition wall and height-adjstable compartment shelves

(from model -02)

Locking Electronic lock with star-shaped handle

Exclusive Line

Picture similar

NOW

according to EN 1565930P

Exclusive LineSERIES HT-REM 020Security level A according to VDMA standard form 24992** Technical data

Door leaf 6 mm thick Total door thickness 60 mm Door opening angle 90° 3-sided bolt locking device DIN right-hinged door Fixture for floor anchoring

Standard equipment Double-walled interior safe of security level B With up to 12 rifle stands (see dimensions table) Cleaning brush holder Detachable partition wall and height-adjustable compartment shelves

(from model -03)

Locking Double-bit security lock (including 2 keys)

SERIES HT-REM 040Furniture safes of Security level B according to VDMA standard form 24992** Technical data

Double-walled door and corpus Door leaf 3 mm thick Total door thickness 50 mm Door opening angle 90° 3-sided bolt locking device DIN right-hinged door Fixture for floor anchoring Rifle height 1310 mm

Standard equipment Interior safe With up to 12 rifle stands (see dimensions table) Cleaning brush holder Detachable partition wall and height adjustable compartment shelves

(from model -02)

Locking Double-bit security lock (inkluding 2 keys)

SERIES HT-REM 045Security level B according to VDMA standard form 24992**Technical data

Double-walled door and corpus Door leaf 3 mm thick Total door thickness 100 mm Door opening angle 180° 3-sided bolt locking device DIN right-hinged door Fixture for floor anchoring Rifle height 1330 mm

by HARTMANN TRESORE

30

Standard equipment Interior safe, height 250 mm With up to 12 rifle stands

(see dimensions table) Cleaning brush holder Detachable partition wall and height

adjustable compartment shelve (from model -02)

Locking Double-bit security lock

(including 2 keys)

Exclusive Line

31

by HARTMANN TRESORE



Int. dimensions(h x w x d) mm W

eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

HT-REM 020-01 1500 x 350 x 350 1494 x 344 x 273 90 1294 200 6

HT-REM 020-02 1650 x 430 x 350 1644 x 444 x 273 107 1344 300 8

HT-REM 020-03 1650 x 600 x 350 1644 x 592 x 273 150 1344 300 5 + 5

HT-REM 020-04 1650 x 800 x 350 1644 x 792 x 273 170 1344 300 8 + 4

Furniture safe of Security level B according to VDMA standard form 24992**



eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

HT-REM 040-01 1600 x 500 x 450 1540 x 440 x 345 115 1310 230 8

HT-REM 040-02 1600 x 680 x 450 1540 x 620 x 345 130 1310 230 7 + 4

HT-REM 040-03 1650 x 810 x 450 1590 x 750 x 345 174 1310 280 8 + 4

Security level B according to VDMA standard form 24992**



eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

HT-REM 045-01 1700 x 650 x 500 1580 x 530 x 336 228 1330 250 8

HT-REM 045-02 1700 x 800 x 500 1580 x 680 x 336 280 1330 250 7 + 5

HT-REM 045-03 1700 x 950 x 500 1580 x 830 x 336 332 1330 250 10 + 5

Resistance grade N (O) according to EN 1143-1



eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

HT-REM 047-01 1700 x 650 x 500 1576 x 526 x 330 295 1330 230 8

HT-REM 047-02 1700 x 800 x 500 1576 x 676 x 330 365 1330 2 x 230 7 + 4

HT-REM 047-03 1700 x 950 x 500 1576 x 818 x 330 396 1330 2 x 230 10 + 7




eight

(in k

g)

Adjus

tabl

e he

ight

(in m

m)

Inte

rior s

afe

(heig

ht in

mm)

Rifle

sta

nds

HT-REM 049-01 1700 x 650 x 500 1576 x 526 x 330 335 1330 230 8

HT-REM 049-02 1700 x 800 x 500 1576 x 660 x 330 400 1330 2 x 230 8 + 4

HT-REM 049-03 1700 x 950 x 500 1576 x 818 x 330 475 1330 2 x 230 10 + 7

REMINGTON is a trademark used by HARTMANN TRESORE AG under license from RA Brands, LLC.

Prestigious and secure. Give your home a personal and elegant note.

Remington rifle cabinets meet European security standards.

Standard equipment Interior safe, height 250 mm With up to 12 rifle stands

(see dimensions table) Cleaning brush holder Detachable partition wall and height

adjustable compartment shelve (from model -02)

Locking Double-bit security lock

(including 2 keys)

Security level A and B: Insurance rating private €1,000*and commercial €2,500*

32

HARTMANN AIRBRUSH SAFES

HARTMANN AIRBRUSH SAFESwith your own

personal design

HARTMANN AIRBRUSH SAFES

Have your own personal safe or rifle cabinet designed according to your personal wishes. Our

airbrush artist knows his craft and will design a real eyecatcher with the motif of your choice just how you want it. Simply choose a safe or rifle cabinet from our extensive range that meets your needs and requirements in terms of size and security level and give us a picture or copy of your favourite motif.

If you wish, we can also offer you a customized solution with the precious wooden interior fitting.

Exclusive Line

Exclusive Line

HARTMANN SAFES

HARTMANN SAFES

33Exclusive Line

HARTMANN RIFLE SAFES

With pull-out shelves and an exclusively furnished. The ideal way to prestigiously store your weapons with care.

HARTMANN ART SAFES

HARTMANN SHORT WEAPONS CABINETS HARTMANN RIFLE CABINETSwith wooden cladding and lighting

HARTMANN HIGH GLOSS RIFLE CABINETS

Exclusive Line

34

HARTMANN SAFES

HARTMANN VEHICLE RIFLE SAFES

WTS 023-01

HARTMANN VEHICLE RIFLE SAFES SERIES AT

The vehicle rifle safe guarantees the secure transport of firearms and hunting knives in conformity with the law. The safe is equipped with two strong handles which make it easy to load and unload. Available in various sizes at security level A (VDMA 24992) or without a security level. Ready for fixed mounting with bore holes in the floor and on the door hinge side.

HARTMANN BULLET TRAP CONTAINER Model WTS 023-01Device to test the loading state of short weapons, tested with certificate. To avoid accidents the weapon can be securely tested for real unloading using the HARTMANN BULLET TRAP CONTAINER.

ModelAT

Ext. dimensions(h x w x d) in mm

Rifles stands

Approx. weight(in kg)

Approx volume( in litres)


AT 1/A 850 x 220 x 310 4 35 53

AT 2/A 1250 x 220 x 310 4 45 78

without security level

AT 1 850 x 220 x 310 4 20 55

AT 2 1250 x 220 x 310 4 30 80

VEHICLE RIFLE SAFESPursuant to § 12, section 3 of the Ger-man Weapons Law (WaffG), a weapon may not be “readily accessible” during transportation. It should rather be kept in “lockable container”. This means that the contaoner must be locked. A sim-ple case is no longer sufficient enough. The same applies to fixed-blade knives with a blade length of more than 12 cm (§ 42a WaffG), which includes most hunting knives.

§

Accessories

35

HARTMANN Double-bit locks (Selection with various fittings)

Locking Variants and Fittings Our standard rifle cabinets come with a double-bit high security lock equipped with 2 double-bit keys.

We would like to give you a short overview of the various locks and fittings. We also wish to point out that not every rifle cabinet and safe can be combined or fitted with every lock or fitting!

Our experts will be happy to advise you if you wish to know more.

The Locking System for the Interior SafeThe standard version consists of an interior lock with 2 keys. A mechanical combi-nation lock is also available as a special feature for most safes of security level B and the VdS-classes N (0) to II.

Special ColoursOur rifle cabinets have the standard colour light grey (RAL 7035) unless otherwise specified in the series description.Almost the entire RAL colour range is available at a small additional charge

Interior Safes Additional interior safes are also available with many of our models. Please ask one of our experts!

Special EquipmentThe special features for your HARTMANN rifle cabinet are best ordered at the same time. If you have any questions or special wishes not dealt with in this catalogue, give us a call. We will be happy to accommodate your requirements.

Safe Drawers, Door Compartments and Top Piece Safes

HARTMANN Mechanical combination locks (Selection with various fittings)

HARTMANN Electronic locks(Selection with various fittings)

HARTMANN Ammunition drawers

HARTMANN Top piece safes

Lockable interior compartment

Important! Fittings protrusion of up to 70 mm with some model types.

36

HARTMANN PRODUCT OVERVIEW

HARTMANN ACRYLIC SAFES

The acrylic safe is often used for

presenting exclusive products at

trade fairs and other events or

for competitions and lotteries.

One option is to rent the safe.

HARTMANN HIGH GLOSS SAFESWe are happy to send you detailed information about

the products named or shown here!

HARTMANN FIREPROOF DATA AND DOCUMENT SAFES

HARTMANN SCHLÜSSELTRESORE

HARTMANN FORTIFIED SAFES with genuine wooden cladding

HARTMANN ROOM SAFES

HARTMANN KEY MANAGEMENT

HARTMANN PRODUCT OVERVIEW

37

HARTMANN Munitionsschubladen

❚ PRODUCTS Business safes Private safes Fireproof safes Wall safes Rifle cabinets Data storage cabinets Document cabinets Hazardous substance cabinets Furniture safes Hotel safes Key safes Strong room doors Airbrush safes Banking technology Used safes

❚ SERVICES All security levels All sizes All colours Customized products

❚ CUSTOMER SERVICES Local advisory service Disposal of old safes Relocations Immediate help in case of burglary Damage assessment Loan safes Leasing & financing

HARTMANN DRAWER SAFES

HARTMANN RECEIPT/ISSUANCE SAFES

WEAPONS LAW

§

Extract from the Law on the new ordinances for the German Weapons Lawof 11. 10. 2002 - Extract from § 36 WaffG 2002

Safekeeping of weapons and ammunition (1) Anyone who possesses weapons or ammunition has to comply with the nec-

cessary regulations to ensure that these objects are not lost or do not come into

the possession of unauthorized third parties. Firearms must be kept separately

from ammunition, unless they are kept in a security container that meets the

requirements at least of DIN/EN 1143-1 resistance grade 0 (as of May 1997)

or a standard with the same level of protection of another Member State of the

agreement in the European Economic Area (EEA).

(2) Firearms, the acquisition of which entails the obligation to obtain a permit,

and prohibited weapons are to be kept safe at least in a container correspon-

ding to DIN/EN 1143-1 resistance grade 0 (as of May 1997) or equivalent

container; an equivalent is in particular a container of security level B according

to VDMA 24992 (as of May 1995). Fot up to ten rifles the secure safekeeping in

a container is one that corresponds to security level A according to VDMA 24992

(as of May 1995) or a standard with equal level of protection of another EEA

Member State. Comparably secured rooms are to be regarded as equivalent.

(3) Anyone who possesses firearms, ammunition or prohibited weapons has

to prove on request to the authorities that he or she has taken the measures

necessary for the secure safekeeping. If there is reasonable doubt about a

secure safekeeping, the authorities can require the owner to allow access to the

place of safekeeping in order to test the secure safekeeping. Homes may be

entered against the will of the occupant only to prevent immediate danger to

public safety; to this extent the basic right of the inviolability of the home may

be curtailed.

(4) If the present safekeeping of weapons or ammunition, the acquisition and

possession of which require an appropriate permit, does not correspond to the

requirements set out in this Act or a statutory instrument according to section

5, the owner has to undertake to comply with the additional regulations by 31.

08. 2003 in order to guarantee a safekeeping that meets these requirements.

This is to be shown and proved to the authorities responsible within the period

specified in subsection 1.

Further information on the Weapons Law and the statutory instruments can be found at www.waffenschraenke.de

Explanatory notes on the Weapons Law:

The formulation „...or do not come into

the possession of unauthorized third par-

ties ...“ means that the safe key should

be constantly kept by the owner or left in

a secure place (for example, wall safe).

If third parties gain unauthorized access

to the weapons, because, for example,

during the night, when showering or ta-

king a sauna, the key is left unattended,

this consitutes a violation of the Weapons

Law (WaffG).

38

Extract from our LIST OF REFERENCES

39

Bundesgrenzschutzamt KölnBundesgrenzschutzamt Weil am RheinBundesgrenzschutzpräsidium Sankt AugustinBundesgrenzschutzamt Kleve KleveBundesgrenzschutzamt Flensburg FlensburgBundespolizeiamt München München

DEVA Deutsche Versuchs- u. Prüfanstaltfür Jagd-/ Sportwaffen AltenbekenSFG-Sportförderungsgesellschaft Wiesbaden Bundesforstamt Lübberstedt AxstedtForstamt Lüdenscheid LüdenscheidBundesforstamt Möser MöserForstamt Wolfhagen Ahnatal-WeimerForstamt Ludwigslust Kummer/LudwigslustForstamt Grabow KremminBundesforstamt MunsterForstamt Kandel Kandel i.d. PfalzBundesforstamt Klietz KlietzNieders. Forstamt Uslar UslarForstamt Riefensbeek Osterode a. HarzBundesforstamt Senne Bad LippspringeNiedersächsisches Forstamt UslarBundesforstamt Warnerheide TroisdorfBundesforstamt Spakeler Heide DammeForstamt Wolfhagen WolfhagenNieders. Forstamt Saupark SpringeStaatliches Forstamt Titisee-NeustadtNiedersächsisches Forstamt HudeStadtforstamt Brilon BrilonStadtforstamt Göttingen GöttingenStadtforstamt Forstrevier HannoverForstverwaltung ParsauForstamt Bad Hersfeld Bad HersfeldBundesforstamt Hintersee HinterseeNieders. Forstamt Carrenzien StapelBundesforstamt Lübtheen LübtheenNieders. Forstamt Carrenzien Neuhaus / E.Forstamt Sankt Blasien Sankt BlasienForstamt Koblenz KoblenzNieders. Landesforstamt Dassel

Polizeipräsidium Essen Essen Kriminalpolizei Schwelm SchwelmPolizeipräsidium Köln KölnLandespolizeidirektion KarlsruhePolizeipräsidium Bielefeld BielefeldPolizeipräsidium Bonn BonnPolizeipräsidium Oberhausen OberhausenPolizeipräsidium Essen EssenKreispolizeibehörde Meschede MeschedePolizei Schießsportverein PaderbornPolizeipräsidium Trier TrierPolzizeipräsidium Mainz MainzKreispolizeibehörde Schwelm SchwelmPolizeidirektion ZKD StendalPolizeipräsidium Münster MünsterPolizeipräsidium Chemnitz ChemnitzPolizeisportverein Linnich LinnichPolizeipräsidium Niederbayern RegensburgPolizeipräsidium Frankfurt a. M. Frankfurt am MainKreispolizeibehörde Soest SoestPolizeipräsidium Osthessen FuldaKreispolizeibehörde Olpe Olpe

Kreispolizeibehörde Kleve KleveAkademie der Polizei FreiburgPolizeiwache Meckenheim MeckenheimPolizeiamt für Technik HannoverPolizeipräsidium Köln Köln (Kalk)Stadtverwaltung Bad RappenauPolizeidirektion Freudenstadt FreudenstadtSportvereinigung Polizei von 1920 e.V. HamburgPolizeipräsidium Koblenz KoblenzPolizeidirektion Calw CalwPolizei Raesfeld RaesfeldKreispolizeibehörde Olpe OlpeBereitschaftspolizei Rheinland-PfalzZentrale Polizeitech. Dienste NRW Duisburg

Staatliches Bauamt Wesel WeselStaatliches Hochbauamt Ansbach AnsbachStaatliches Hochbauamt Kempten KemptenStadt Landshut Hochbauamt LandshutStaatliches Hochbauamt Ingolstadt IngolstadtStaatliches Hochbauamt Bad KissingenBundeswehr Kalkar KalkarStandortverwaltung Berlin BerlinBundeswehr-Dienstleistungs-Zentrum ErfurtLandratsamt Böblingen BöblingenBezirksregierung Detmold Detmold

Deutscher Jagdschutzverband e.V. BonnLandesjagdverband Baden-Württemberg StuttgartBayerischer Jagdverband OberviechtachJagdschule Gut Grambow GrambowLandesjagdverband NRW e.V. DortmundLandesjagdverband RP e.V. GensingenLandesjagdverband Hamburg e.V. HamburgLandesjägerschaft Niedersachsen e.V. Hannover

Schützenverein Olympia WilhelmshavenOlympia Schießanlage Hochbrück GarchingDeutscher Schützenbund e.V. Wiesbaden Bayerischer Sportschützenbund Garching Rheinischer Schützenbund LeichlingenWestfälischer Schützenbund Dortmund Nordwestdeutscher Schützenbund BassumNorddeutscher Schützenbund KielBund der Militär- und Polizeischützen (BDMP) e.V. PaderbornNiedersächsischer Sportschützen-verband e.V. WunsdorfSport Pistol and Rifle Club PulheimSchützenverein 1924 e.V. Weingarten/BadenLandessportbund NS e.V. HannoverSportpark GmbH SolingenSportschützen Köln Ostheim KölnPolizeisportverein Linnich LinnichSchießsportverein Benningsen SpringeSportschützenverein Untertürkheim StuttgartSchießsportgemeinschaft Detmold LemgoSportschützenverein Edlingen Dischingen TSG Sportgemeinschaft Bad WurzachGTV-Schießsportabteilung BremerhavenSportschützen Raesfeld RaesfeldSchießsportfreunde Lengsdorf e.V. Bonn

Recommended by the Bundesverband

Deutscher Berufsjäger


Official supplier to the Deutsche

Schützenbund and its national team

HARTMANN TRESORE AG

HEAD QUARTERSPamplonastraße 2D-33106 PaderbornTelephone +49 (0) 52 51 - 17 44 -0Fax +49 (0) 52 51 - 17 44 [email protected]

www.waffenschraenke.de [email protected]

HAMBURG BRANCHVorsetzen 41D-20459 HamburgTelephone +49 (0) 40 - 36 90 54 -30Fax +49 (0) 40 - 36 90 54 [email protected]

BERLIN BRANCHKurfürstendamm 63D-10707 BerlinTelephone +49 (0) 30 - 88 70 87 -70Fax +49 (0) 30 - 88 70 87 [email protected]

DUSSELDORF BRANCHGraf-Adolf-Straße 70D-40210 DusseldorfTelephone +49 (0) 2 11 - 17 93 73 -49Fax +49 (0) 2 11 - 17 93 73 [email protected]

COLOGNE BRANCHHohenstaufenring 48-54 D-50674 CologneTelephone +49 (0) 2 21 - 8 20 18 -20Fax +49 (0) 2 21 - 8 20 18 [email protected]

Errors, misprints, variations in dimension and weight, and design changes that serve technical progress purposes are reserved. Some images may be shown with optional and not included accessories.

© H

ARTM

ANN

TRES

ORE A

G (W

T-Kat.

021

2)

HARTMANN TRESORE AG HARTMANN TRESORE AG HARTMANN TRESORE AG HARTMANN TRESORE AG

gun safes - hospitality center · fire protection and fire security a cabinet with security level a...

Documents