gants tabliers de travail work aprons - manulatex€¦ · notre société manulatex-france fabrique...
TRANSCRIPT
FABRIQUÉ EN FRANCEMADE IN FRANCE
TABLIERS DE TRAVAILWork aprons
GANTSGloves
TABLIERS MÉTALLIQUESMetallic aprons
Notre société
Manulatex-France fabrique des équipements de protection individuelle depuis 40 ans.
La politique de l’entreprise a toujours été tournée vers l’innovation, avec comme but essentiel la protection apportée aux personnes, mais aussi l’assurance d’un plus grand confort de travail.
De là vient notre slogan « Bien plus que la sécurité »
Nous sommes fiers de présenter dans ce catalogue le meilleur de notre savoir-faire, issu de longues recherches et de nombreux dépôts de brevets.
Nos équipements sont disponibles à travers un réseau de distribution mondial.
Our Company
Manulatex-France has manufactured individual protective equipements for more than 40 years.
Our company policy has always been driven towards innovation with the objective of bringing optimal safety and greater comfort to the workplace.
This is why our moto is "More than just safety"
We are proud to present inside this catalogue the latest innovations issued from our know-how, products developments and patents.
Our equipments are available worldwide through a large network of distributors.
SOMMAIRE / CONTENTS
Gammes - Range ................................................................................................................. 5WILCO ........................................................................................................................... 6 WILCOFLEX ................................................................................................................... 7WILCO ...................................................................................................................... 8GCM ............................................................................................................................. 9Fixe-gant - glove tensioners ....................................................................................... 10
Gammes - Range ................................................................................................................. 12PARINOX ....................................................................................................................... 13LIGHTINOX ..................................................................................................................... 14FLEXINOX ....................................................................................................................... 16TPLUS ......................................................................................................................... 18 Accessoires - accessories ........................................................................................... 20
Gammes & domaines d'application - Range & application fields ................................ 22Types de montage - Types of fittings.................................................................................. 23
ALFA - BRAVO .............................................................................................................. 24 LIMA - OMEGA ............................................................................................................. 25DELTA Monobloc ......................................................................................................... 26DELTA ............................................................................................................................ 27DELTA à manches ....................................................................................................... 28JULIET avec ou sans manches ................................................................................... 29ROMEO avec ou sans manches ............................................................................... 30GOLF 30 avec ou sans manches .............................................................................. 31HOTEL - YANKEE ........................................................................................................... 32GOLF 40 ....................................................................................................................... 33KILO ............................................................................................................................... 34SIERRA ........................................................................................................................... 35S-PROTEC® plus .............................................................................................................. 36
Manchettes - Oversleeves .................................................................................................. 37
Normes & Directives - Standards & regulations ............................................................... 39
3Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS MÉTALLIQUES - METALLIC APRONS
TABLIERS DE TRAVAIL - WORK APRONS
GANTS EN COTTE DE MAILLES - CHAINMAIL GLOVES
0.4
0.5
4 Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual
Réduction des TMSReduction of the MSDs
Protection des systèmes de serrageProtection of the tightenning systems
Ultra-confortableUltra-comfortable
Sangle amovible protégée par un ourlet en cotte de mailles Removable strap protected by a chainmail cover
Ressort intégré dans la cotte de maillesIntegrated spring in a chainmail cover
100% Polyuréthane FDA100% Polyurethane FDA
Nouvelle conception de ressort, plus solideNew spring design, more resistant
Boucle et accessoires inoxBuckle and accessories made of stainless steel
Ne se détend pas. Durée de vie augmentéeDoes not get loose. Extended lifetime
NOUVELLE CONCEPT ION NEW DESIGN
2 Types de serrage2 tightening types
Plus ergonomiqueMore ergonomic
Sangle PUPU strap
Ressort inoxStainless steel
spring
5
GANTSGLOVES
5
GANTSGLOVES
Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual
GAMMES - RANGES
GCM sangle amovible, removable strap
WILCO100% inox, 100% stainless steel
WILCOFLEX fixe-gant intégré, integrated tensioners
WILCO T+plus léger, lighter
0.4
GANTS - GLOVES
TAILLES STANDARD ET ÉQUIVALENCES / SIZES AND EQUIVALENCES* 00 0 1 2 3 4 5 6
XXXS 4 - 4 1/2 XXS 5 - 5 1/2 XS 6 - 6 1/2 S 7 - 7 1/2 M 8 - 8 1/2 L 9 - 9 1/2 XL 10 XXL 11
Noir/Black Marron/Brown Vert/Green Blanc/White Rouge/Red Bleu/Blue Jaune/Yellow Violet/Purple
Les gants MANULATEX-France 100% inox alimentaire sont utilisés dans les industries de la viande, les établissements de restauration, la grande distribution, l’industrie du textile et bien d’autres domaines. Ils assurent une protection contre les coupures, les coups de couteaux à main ou outils coupants à main.
MANULATEX-France mesh gloves are made with 100% food contact approved stainless steel. They are used by butchers in meat industries, Horeca, supermarkets, and many other fields such as textile industry… They ensure cut-protection against any risks with hand knives, hand cutting tools or stabbing.
6 Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual
GANTSGLOVES
Gant épauleShoulder gloveRéf. 0GWO.131*6.000.GA Réf. 0GWO.131*6.000.DR
WILCO
Gant 5 doigts sans manchette5-finger glove without cuffRéf. 0GWO.131*0.000.GA Réf. 0GWO.131*0.000.DR
Gant avec manchette courteGlove with short cuffRéf. 0GWO.131*2.075.GA Réf. 0GWO.131*2.075.DR
Serrage poignet par ressort inoxStainless steel spring wristband
Gant avec manchette longueGlove with long cuffRéf. 0GWO.131*2.000.GA Réf. 0GWO.131*2.000.DR
Gant avec manchette "STOPLAME"Glove with "BLADE-STOP" cuffRéf. 0GWO.131*7.000.GA Réf. 0GWO.131*7.000.DR
Remplacez l'astérisque ( * ) par le numéro de taille du tableau page 5 / Replace the * by the size number of the table on page 5
NF EN 1082-1ISO 13999-1
NF EN 14328NF EN 1811 + A1
BREVETÉ
PATENTED
PRODUCT
INTELLECTUAL
PROPERTY
NOUVELLE CONCEPTION NEW DESIGN
• 100% inox• Nouveau ressort plus résistant• Serrage(s) par ressort protégé• Disponible en version main gauche (GA)
ou main droite (DR)• Existe en 8 tailles
• 100% stainless steel• New spring fastening, more resistant• Covered and protected spring system• Choose either left-handed glove (GA)
or right-handed glove (DR)• 8 sizes available
Ø 0,5 mm
4 mm
3 mm
7
GANTSGLOVES
Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual
Gant avec manchette courteGlove with short cuffRéf. 0GWS.131*2.075.GA Réf. 0GWS.131*2.075.DR
Remplacez l'astérisque ( * ) par le numéro de taille du tableau page 5 / Replace the * by the size number of the table on page 5
• Fixe-gant intégré, auto-ajustement de la maille à la longueur des doigts
• Meilleure dextérité• 100% inox• Nouveau ressort plus résistant• Serrage(s) par ressort protégé• Disponible en version main gauche (GA)
ou main droite (DR)• Existe en 8 tailles
• Integrated tensioners into the glove, for self-adjusted chainmail on fingertips
• Better dexterity• 100% stainless steel• New spring fastening, more resistant• Covered and protected spring system• Choose either left-handed glove (GA)
or right-handed glove (DR)• 8 sizes available
Ø 0,5 mm
4 mm
3 mm
Sans les ressorts intégrésWithout integrated tensioners
Avec les ressorts intégrésWith integrated tensioners
Gant 5 doigts sans manchette5-finger glove without cuffRéf. 0GWS.131*0.000.GA Réf. 0GWS.131*0.000.DR
Gant avec manchette longueGlove with long cuffRéf. 0GWS.131*2.000.GA Réf. 0GWS.131*2.000.DR
Gant avec manchette "STOPLAME"Glove with "BLADE-STOP" cuffRéf. 0GWS.131*7.000.GA Réf. 0GWS.131*7.000.DR
Ajustement de la longueur de manchette par ressorts intégrésExtra tensioners on top of the sleeve, pulling out chainmail
Gant épauleShoulder gloveRéf. 0GWS.131*6.000.GA Réf. 0GWS.131*6.000.DR
WILCOFLEX
NF EN 1082-1ISO 13999-1
NF EN 14328NF EN 1811 + A1
BREVETÉ
PATENTED
PRODUCT
INTELLECTUAL
PROPERTY
NOUVELLE CONCEPTION NEW DESIGN
8 Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual
GANTSGLOVES
Gant t+ avec manchette longueGlove with long cuffRéf. 0GWO.711*2.000.GA Réf. 0GWO.711*2.000.DR
• 40% à 50% plus léger qu’un gant en cotte de mailles classique• Moins d’usure par frottements• Réductions des TMS (troubles musculo-squelettiques)• Plus de souplesse et de dextérité• Meilleure sensation tactile et préhension• 100% inox• Serrage(s) par ressort protégé• Disponible en version main gauche (GA)
ou main droite (DR)• Existe en 8 tailles
• 40% to 50% lighter than a classic metal mesh glove• Less wear damage due to friction• Reduction of the MSDs (musculoskeletal disorders)• More flexibility and more dexterity• Better tactile sensation and prehension• 100% stainless steel• Covered and protected spring system• Choose either left-handed glove (GA)
or right-handed glove (DR)• 8 sizes available
Ø 0,4 mm
4 mm
3,2 mm
0.4
Gants ultra légersUltralight gloves
Gant t+ 5 doigts sans manchette5-finger glove without cuffRéf. 0GWO.711*0.000.GA Réf. 0GWO.711*0.000.DR
Gant t+ avec manchette courteGlove with short cuffRéf. 0GWO.711*2.075.GA Réf. 0GWO.711*2.075.DR
Gant t+ épauleShoulder gloveRéf. 0GWO.711*6.000.GA Réf. 0GWO.711*6.000.DR
Serrage poignet par ressort inoxStainless steel spring wristband
Remplacez l'astérisque ( * ) par le numéro de taille du tableau page 5 / Replace the * by the size number of the table on page 5
WILCO T+
NF EN 1082-1ISO 13999-1
NF EN 14328NF EN 1811 + A1
Gant avec manchette "STOPLAME"Glove with "BLADE-STOP" cuffRéf. 0GWO.711*7.000.GA Réf. 0GWO.711*7.000.DR
BREVETÉ
PATENTED
PRODUCT
INTELLECTUAL
PROPERTY
NOUVELLE CONCEPTION NEW DESIGN
9
GANTSGLOVES
Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual
Gant avec manchette "STOPLAME"Glove with "BLADE-STOP" cuffRéf. 0GCM.131*7.000.GA Réf. 0GCM.131*7.000.DR
NF EN 1082-1ISO 13999-1
NF EN 14328NF EN 1811 + A1
GCM
• Sangle polyuréthane FDA amovible• Sangle protégée par la cotte de mailles• Maintien et réglage de la bloucle assurés
par la sangle• Boucle de réglage et accessoires tout inox• Disponible en version main gauche (GA)
ou main droite (DR)• Existe en 8 tailles
• Removable polyurethane strap – FDA approved• Strap covered by mesh• Fastening by press stud button on strap• Buckle and accessories made of
100% stainless steel • Choose either left-handed glove (GA)
or right-handed glove (DR)• 8 sizes available
Gant avec manchette longueGlove with long cuffRéf. 0GCM.131*2.000.GA Réf. 0GCM.131*2.000.DR
Gant 5 doigts sans manchette5-finger glove without cuffRéf. 0GCM.131*0.000.GA Réf. 0GCM.131*0.000.DR
Gant épauleShoulder gloveRéf. 0GCM.131*6.000.GARéf. 0GCM.131*6.000.DR
Remplacez l'astérisque ( * ) par le numéro de taille du tableau page 5 / Replace the * by the size number of the table on page 5
Fermeture avec pressionPress-stud fastening
Pensez à utiliser un fixe-gant pour une
meilleure préhension (P.10)
Consider using a glove tensioners to improve
the grip (P.10)
Ø 0,5 mm
4 mm
3 mm
NOUVELLE CONCEPTION NEW DESIGN
GANTSGLOVES FIXE-GANT / GLOVE TENSIONERS
10 Avril 2019 - Photos et document non contractuels / Avril 2017 - Document and pictures inside are non-contractual
Un système EXCLUSIF qui permet au gant d’épouser la forme de la main et facilite la préhension de petits objets.100% Polyuréthane sans support.An exclusive system to adjust the glove to the hand and improve the operator’s dexterity.100% Polyurethane without support.
Fixe-gantGlove tensionersRéf. 0FGES.M.100.05Réf. 0FGES.L.100.05
Sansfixe-gantWithout tensioners
Pour les tailles / For sizes Fixe-gant
00 0 1 2 3M
4 5 6L
Nouvelle matière àmémoire de formeNew materialShape memory
BREVETÉ
PATENTED
PRODUCT
INTELLECTUAL
PROPERTY
11
TABLIERS MÉTALLIQUESMETALLIC APRONS
Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual
Tous nos tabliers et tuniques métalliques sont conformes au réglement (UE) EPI 2016/425 et à la norme EN ISO 13998.
La norme EN ISO 13998 comporte deux niveaux de protection :
All our metallic aprons and tunics are compliant with (EU) PPE 2016/425 regulation and EN ISO 13998 standards.The EN ISO 13998 standard provides two performance levels:
• level 1 - products complying with this performance level are adapted for a professional usage when the risk is low, for example when using wide blade knives for trimming.
• level 2 - products complying with this performance level are adapted for a professional usage when the risk is higher, for example when using thin blade knives for boning.
• niveau 1 : les produits conformes à ce niveau de performance conviennent dans des situations de travail où le niveau de risque est faible comme, par exemple, lors de l’utilisation de couteaux à large lame (parage, petite découpe).
• niveau 2 : les produits conformes à ce niveau de performance conviennent dans des situations de travail où le niveau de risque est plus élevé comme, par exemple, lors de l’utilisation de couteaux étroits (désossage).
Les tabliers métalliques MANULATEX-France 100% inox alimentaire sont utilisés dans les industries de la viande, les établissements de restauration, la grande distribution, l’industrie du textile et bien d’autres domaines. Ils assurent une protection contre les coupures, les coups de couteaux à main ou outils coupants à main.
MANULATEX-France metallic aprons are made with 100% food contact approved stainless steel. They are used by butchers in meat industries, Horeca, supermarkets, and many other fields such as textile industry…They ensure cut-protection against any risks with hand knives, hand cutting tools or stabbing.
NIVEAUX DE PROTECTION - PERFORMANCE LEVELS
12 Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS MÉTALLIQUESMETALLIC APRONS NOTRE GAMME - OUR RANGE
Ø 0,7 mm
7 mm
5,6 mm
Ø 0,5 mm
4 mm
3 mm
PARINOX
TPLUS
Tunique et tablier de pareur Trimming tunic and apron
Tunique de désosseur Boning tunic
FLEXINOX
LIGHTINOXNiveau 1 - level 1
Niveau 2- level 2
Niveau 2 - level 2
Niveau 2 - level 2
Ø 0,5 mm
4 mm
3 mm
0.5
Tunique et tablier de désosseur Boning tunic and apron
TABLIERS MÉTALLIQUESMETALLIC APRONS
EN ISO 13998
EN ISO 13998
EN ISO 13998
EN ISO 13998
27,4 mm
17,9 mm
Tunique et tablier de désosseur Boning tunic and apron
13
TABLIERS MÉTALLIQUESMETALLIC APRONS
Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual
PARINOX
Tablier et tunique de pareur en cotte de mailles 100 % inox La partie haute du tablier est équipée de quatre points de fixation - double platine - qui permettent à l’opérateur d’ajuster le tablier selon sa morphologie
Flexibilité et confort de mouvements assurés par la cotte de mailles
Trimming apron made of 100% stainless steel chainmail The upper part of the apron is equipped with four fixing points - double fixing plate - offering the operator two adjustments to fit his morphology
Provides all the comfort and flexibility of chainmail
Protection niveau 1 - level 1 f adapté pour des opérations de parage f suitable for trimming
Ø 0,5 mm
4 mm
3 mm
Largeur x hauteur (cm)Width x height (cm) Référence / Reference Poids (grammes)
Weight (grams)Stature opérateur (cm)
Operator’s sizeTour de taille / poitrine (cm)
Waist / chest measurement
Tablier Apron
PARINOX
44 x 70 0XPA130.11.044X070 800 g < 164 < 96
44 x 77 0XPA130.11.044X077 850 g < 182 < 96
55 x 78 0XPA130.12.055X078 1 050 g < 182 < 120
55 x 85 0XPA130.13.055X085 1 100 g < 120 < 120
Livré avec Vitofix / Delivered with Vitofix
Largeur x hauteur* (cm)Width x height (cm) Référence / Reference Poids (grammes)
Weight (grams)Stature opérateur (cm)
Operator’s sizeTour de taille / poitrine (cm)
Waist / chest measurement
Tunique tunic
PARINOX
50 x 85 0XPA130.7S1.000XXX 1 580 g 148-165 80-110
56 x 85 0XPA130.7M1.000XXX 1 770 g 148-165 90-120
56 x 100 0XPA130.7M4.000XXX 1 990 g 158-200 90-120
56 x 115 0XPA130.7M7.000XXX 2 140 g 165-220 90-120
* Hauteur mesurée à partir de l’épaule / Height from top of the shoulder
TablierApron
TuniqueTunic
EN ISO 13998LIGHTINOX
14 Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS MÉTALLIQUESMETALLIC APRONS
EN ISO 13998
LIGHTINOX
Tablier et tunique de désosseur en cotte de mailles 100 % inox La partie haute du tablier est équipée de quatre points de fixation - double platine -
qui permettent à l’opérateur d’ajuster le tablier selon sa morphologie Flexibilité et confort de mouvements assurés par la cotte de mailles
Boning apron or tunic made of 100% stainless steel chainmail The upper part of the apron is equipped with four fixing points - double fixing plate -
offering the operator two adjustments to fit his morphology Provides all the comfort and flexibility of chainmail
Protection niveau 2 - level 2 f adapté pour des opérations de désossage f suitable for boning
0,7 mm
7 mm
5,6 mm
LIGHTOVERLIGHTINOX LIGHTOVER avec manche(s)
with sleeve(s)
15
TABLIERS MÉTALLIQUESMETALLIC APRONS
Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual
LIGHTINOX
Largeur x hauteur (cm) * Width x height (cm) Référence / Reference Poids (grammes)
Weight (grams)Stature opérateur (cm)
Operator’s sizeTour de taille /poitrine (cm) Waist / chest measurement
Tablier LIGHTINOX
/ LIGhTINOx
apron
55 x 70 0XLI650.12.055X070 990 g 148 - 165 90 - 120
55 x 80 0XLI650.12.055X080 1 120 g 158 - 190 90 - 120
Livré avec Vitofix / Delivered with Vitofix
Largeur x hauteur (cm) * Width x height (cm) Référence / Reference Poids (grammes)
Weight (grams)Stature opérateur (cm)
Operator’s sizeTour de taille /poitrine (cm) Waist / chest measurement
Tunique LIGHTOVER
sans manche /
LIGhTOVER tunic without
sleeve
55 x 95 0XLI650.7M3.000XXX 2 290 g 158 - 190 90 - 120
55 x 110 0XLI650.7M6.000XXX 2 480 g 165 - 220 90 - 120
Largeur x hauteur (cm) * Width x height (cm) Référence / Reference Poids (grammes)
Weight (grams)Stature opérateur (cm)
Operator’s sizeTour de taille /poitrine (cm) Waist / chest measurement
Tunique LIGHTOVER
fendu/
LIGhTOVERTunic
with split leg
55 x 120 0XLI650.8M8.000XXX 2 700 g 165 - 220 90 - 120
Livré avec sangles de taille et de jambes / Delivered with waist and legs straps
Manches Sleeves
Largeur x hauteur (cm) * Width x height (cm) Référence / Reference
Poids (grammes)
Weight (grams)
Stature opérateur
(cm) Operator’s size
Tour de taille /poitrine (cm) Waist / chest
measurement
Tunique LIGHTOVER
avec manche(s)
/ LIGhTOVER tunic with sleeve(s)
Manche gauche 65 cm Left sleeve 65 cm
55 x 95 0XLI650.7M3.130XG5 2 360 g 158 - 190
90 - 120
55 x 110 0XLI650.7M6.130XG5 2 550 g 165 - 220
Manche droite 65 cm Right sleeve 65 cm
55 x 95 0XLI650.7M3.130DX5 2 360 g 158 - 190
55 x 110 0XLI650.7M6.130DX5 2 550 g 165 - 220
Deux manches 65 cm Two sleeves 65 cm
55 x 95 0XLI650.7M3.130DG5 2 560 g 158 - 190
55 x 110 0XLI650.7M6.130DG5 2 750 g 165 - 220
* (Largeur x hauteur ) Hauteur mesurée du haut de l’épaule / (Width x Height) Height from top of the shoulder
LIGHTINOX
16 Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS MÉTALLIQUESMETALLIC APRONS
EN ISO 13998
FLEXINOX
Tablier et tunique de désosseur en plaquettes 100 % inox La partie haute du tablier est équipée de quatre points de fixation - double platine - qui permettent à
l’opérateur d’ajuster le tablier selon sa morphologie La forme et la taille des plaquettes offrent une grandeflexibilité
Boning apron and tunic made of 100% stainless steel plates The upper part of the apron is equipped with four fixing points - double fixing plate - offering the operator
two adjustments to fit his morphology Dimensions and shape of the plates make the apron very flexible
Protection niveau 2 - level 2 f adapté pour des opérations de désossage f suitable for boning
Tablier FLEXINOXFLExINOx apron
Tunique FLEXINOXFLExINOx tunic
27,4 mm
17,9 mm
17
TABLIERS MÉTALLIQUESMETALLIC APRONS
Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual
FLEXINOX
Les résultats des tests de perforation mettent en valeur une résistance
exceptionnelle ! Perforation test results
have proved its exceptional resistance!
FLEXINOX
La forme et la disposition des plaquettes du tablier FLEXINOX rendent la pénétration des pointes de couteaux impossible et ce sur ses deux faces. The shape and layout of the FLExINOx apron plates make impossible the penetration of knives on both of its sides.
Largeur x hauteur (cm) Width x height (cm) Référence / Reference Poids (grammes)
Weight (grams)Stature opérateur (cm)
Operator’s sizeTour de taille /poitrine (cm) Waist / chest measurement
Tablier FLEXINOX
/FLExINOx
arpon
40 x 67 0XFL170.11.040X067 1100 g < 158 < 88
45 x 72 0XFL170.11.045X072 1300 g < 170 < 100
55 x 70 0XFL170.12.055X070 1 450 g < 166 < 120
55 x 80 0XFL170.13.055X080 1 650 g < 188 < 120
Livré avec Vitofix / Delivered with Vitofix
Largeur x hauteur (cm) Width x height (cm) Référence / Reference Poids (grammes)
Weight (grams)Stature opérateur (cm)
Operator’s sizeTour de taille /poitrine (cm) Waist / chest measurement
Tunique FLEXINOX
/FLExINOx
Tunic
55 x 70 0XFL170.37.055X070 1500 g < 166 < 120
55 x 80 0XFL170.37.055X080 1700 g < 188 < 120
55 x 90 0XFL170.37.055X090 1 900 g < 200 < 120
Livré avec sangles de dos / Delivered with back strap
18 Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS MÉTALLIQUESMETALLIC APRONS TPLUS
Tunique de désosseur en cotte de mailles 100 % inox Flexibilité et confort de mouvements assurés par la cotte de mailles Moins d'usure par frottements
Boning tunic made of 100% stainless steel chainmail Provides all the comfort and flexibility of chainmail Less wear damge due to friction
Protection niveau 2 - level 2 f adapté pour des opérations de désossage f suitable for boning
Ø0,5 mm
4 mm
3 mm
Tunique sans mancheTunic without sleeve
Tunique avec manche(s)Tunic with sleeve(s)
Tunique fendueTunic with split leg
0.5
Manches ultra légèresUltralight sleeves
EN ISO 13998
0.4
BREVETÉ
PATENTED
PRODUCT
INTELLECTUAL
PROPERTY
19
TABLIERS MÉTALLIQUESMETALLIC APRONS
Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual
TPLUS
Largeur x hauteur (cm)Width x height (cm)
RéférenceReference
Poids (grammes)Weight (grams)
Stature opérateur (cm)Operator’s size
Tour de taille / poitrine (cm)Waist / chest measurement
Tunique TPLUS sans manches
/ TPLUS tunic
without sleeves
56 x 85 0XTU730.7M1.000XXX 1 800 g 148-165 90-120
56 x 100 0XTU730.7M4.000XXX 2 080 g 158-200 90-120
56 x 115 0XTU730.7M7.000XXX 2 240 g 165-220 90-120
64 x 115 0XTU730.7L7.000XXX 2 500 g 165-220 100-140
ManchesSleeves
Largeur x hauteur (cm)
Width x height (cm)
RéférenceReference
Poids (grammes)Weight (grams)
Stature opérateur
(cm)Operator’s
size
Tour de taille / poitrine (cm)Waist / chest
measurement
Tunique TPLUS 1 ou 2 manches
/ TPLUS Tunic with 1 or 2 sleeves
Manche gauche 65 cmLeft sleeve 65 cm
56 x 85 0XTU730.7M1.710XG5 2 090 g 148 - 165
90 - 12056 x 100 0XTU730.7M4.710XG5 2 370 g 158 - 200
56 x 115 0XTU730.7M7.710XG5 2 530 g 165 - 220
64 x 115 0XTU730.7L7.710XG5 2 790 g 165 - 220 100 - 140
Manche droite 65 cmRight sleeve 65 cm
56 x 85 0XTU730.7M1.710DX5 2 090 g 148 - 165
90 - 12056 x 100 0XTU730.7M4.710DX5 2 370 g 158 - 200
56 x 115 0XTU730.7M7.710DX5 2 530 g 165 - 220
64 x 115 0XTU730.7L7.710DX5 2 790 g 165 - 220 100 - 140
Deux manches 65 cmTwo sleeves 65 cm
56 x 85 0XTU730.7M1.710DG5 2 290 g 148 - 165
90 - 12056 x 100 0XTU730.7M4.710DG5 2 570 g 158 - 200
56 x 115 0XTU730.7M7.710DG5 2 730 g 165 - 220
64 x 115 0XTU730.7L7.710DG5 2 990 g 165 - 220 100 - 140
Livré avec sangles de dos et de taille / Delivered with back and waist straps
ManchesSleeves
Largeur x hauteur (cm)
Width x height (cm)
RéférenceReference
Poids (grammes)Weight (grams)
Stature opérateur
(cm)Operator’s
size
Tour de taille / poitrine (cm)Waist / chest
measurement
Tunique TPLUS fendue 2 manches
/ TPLUS Tunic
with split leg 2 sleeves
Manches 65 cmSleeves 65 cm
50 x 100 0XTU730.8S4.710DG5 2 090 g 148 - 165
90 - 12056 x 115 0XTU730.8M7.710DG5 2 370 g 158 - 200
56 x 125 0XTU730.8M9.710DG5 2 530 g 165 - 220
64 x 125 0XTU730.8L9.710DG5 2 790 g 165 - 220 100 - 140
Manches 75 cmSleeves 75 cm
56 x 115 0XTU730.7M1.710DX5 2 090 g 148 - 16590 - 120
64 x 125 0XTU730.8L9.710DG7 2 370 g 158 - 200
Livré avec sangles de dos, de taille et de jambes / Delivered with back, waist and legs straps
* (Largeur x hauteur ) Hauteur mesurée à partir de l’épaule / (Width x Height) Height from top of the shoulder
TPLUS
20 Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS MÉTALLIQUESMETALLIC APRONS ACCESSOIRES - ACCESSORIES
VITOFIXLes tabliers métalliques MANULATEX sont équipés du harnais VITOFIX MANULATEx metallic aprons are equipped with a VITOFIx harness:
Le tablier ne descend plus, le cœur est protégé / The apron no longer slides down, the heart is protected L’habillage est instantané, facile et sûr / Quick and easy to put on Le harnais est monobloc / Single piece harness Le poids du tablier est réparti sur une large surface des épaules et du dos / The weight of the apron is spread over shoulders and back
Double platine - permettent à l’opérateur d’ajuster le tablier selon sa morphologie pour une protection maximum.
Double fixing plate - offering the operator two adjustments to fit his morphology for maximum protection.
TablieR bien ajUSTé, CœUR PRoTégéWELL-FITTED APRON,hEART PROTECTED
Le bord supérieur du tablier doit se situer au dessus du milieu du sternum.The upper edge of the apron must come above the middle of the sternum.
Taille / Size2
Taille / Size1
Taille / Size3
Ref. 0VVITO.001 Ref. 0VVITO.002 Ref. 0VVITO.003
LE BON REPÈREThE RIGhT POSITION
21
TABLIERS MÉTALLIQUESMETALLIC APRONS
Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual
ACCESSOIRES - ACCESSORIES
BRETELLES CROISÉES / CROSS STRAPS
Ref. 0ATP010.50.000
HOUSSE ET SUR-TABLIER / COVER AND PRESS-STUDS APRONNos housses, sur-tabliers de propreté s’adaptent sur nos tabliers métalliques.You can add an hygienic cover or an press-studs apron under or above metallic aprons.
Housse / Cover
Sur-tablier / Press-studs apron
Ref. 0HG.020.01.055X075
Ref. 0HD.030.61.075X115
ACCESSOIRES - ACCESSORIES
22 Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS DE TRAVAIL WORK APRONS
GAMME ET DOMAINES D'APPLICATIONRANGE AND APPLICATION
Poissonnerie, ostréicultureFish, shellfish
Laiterie, fromagerieDairy, cheese products
ConserverieProcessed food
Plonge, nettoyageWashing up, cleaning
Agriculture, traiteAgriculture, milkingIndustrie chimique
Chemical industry
Industrie mécaniqueEngineering
Agriculture, phytosanitaireAgriculture, phytosanitary
Boucherie, salaison, abattoirButchering, meat processing, slaughtering
BRAVO DELTA LIMA
OMEGA
DELTAGOLF
OMEGA
ALFADELTALIMA
HOTELJULIET
YANKEE
BRAVODELTALIMA
OMEGA
KILOSIERRA
SIERRAGOLF
ROMEO
S-PROTEC® PLUS
Un métier...For every industry...
un tablieran apron
23
TABLIERS DE TRAVAIL WORK APRONS
Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TYPES DE MONTAGES - FITTINGS
Sangle autour du cou non réglable. Fixation arrière par crochet et élastique.
Strap around the neck, not adjustable, closure in the back with a hook and an elastic strap.
Sangle réglable autour du cou.Fixation arrière par crochet et élastique.
Adjustable strap around the neck, closure in the back with a hook and an elastic band.
Sangles réglables sur les épaules.Pour un meilleur confort, fixation arrière par crochet et élastique.
Straps over the shoulders with adjustment buckles for a better comfort, closure in the back with a hook and an elastic band.
Sangles sur les épaules.Fixation arrière par nouage.
Straps over the shoulders, the closure is made by tying up the apron in the back.
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
TYPES DE MONTAGE FITTINGS
ÉCONOMIQUE - ECONOMIC
HARNAIS - HARNESS AUTOMATIQUE - AUTOMATIC
STANDARD - STANDARD
NOUVEAU : Crochet plastique incassable et
détectableNEW: Unbreakable and detectable plastic hook
24 Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS DE TRAVAIL WORK APRONS
BRAVO : nitrile Enduction deux faces sur support polyester. Très haute résistance aux graisses animales, au sang et à la température. Garde sa souplesse.Both sides are coated on polyester support. Very high resistance to meat fats, blood and temperature. Remains supple.
Épaisseur Thickness 550 µm
GrammageWeight 600 g/m²
ConditionnementPackaging
Par 1010 pcs
Dimensions standard (L x H)Standard dimensions (W x H) 90 x 115 cm
Tablier ALFA
NITRILE
ALFA : nitrile Enduction deux faces sur support polyester. Très haute résistance aux graisses animales, à l'acide lactique et à la température. Garde sa souplesse.Both sides are coated on polyester support. Very high resistance to meat fats, lactic acid and temperature. Remains supple.
Épaisseur Thickness 500 µm
GrammageWeight 600 g/m²
ConditionnementPackaging
Par 1010 pcs
Dimensions standard (L x H)Standard dimensions (W x H) 90 x 115 cm
Tablier BRAVO
Vert Green
BleuBlue
JauneYellow
Marron Brown
BlancWhite
SPÉCIAL
LAITERIE
BlancWhite
Dedicated to
DAIRY
NF EN ISO 13688 NF EN ISO 13688
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
25
TABLIERS DE TRAVAIL WORK APRONS
Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
OMEGA : film élastomère
Sans support. Résistance aux graisses animales, au sang, aux produits d’entretien courants. Lisse, se nettoie facilement.Without support. Resistance to meat fats, blood and standard cleaning products. Smooth, easy to clean.
LIMA : nitrile
Enduction deux faces sur support polyester. Très haute résistance aux graisses animales, au sang, à l'acide lactique et à la température. Garde sa souplesse.Both sides are coated on polyester support. Very high resistance to meat fats, blood, lactic acid and temperature. Remains supple.
BlancWhite
NF EN ISO 13688 NF EN ISO 13688
Épaisseur Thickness 500 µm
GrammageWeight 600 g/m²
ConditionnementPackaging
Par 1010 pcs
Dimensions standard (L x H)Standard dimensions (W x H) 90 x 115 cm
Tablier LIMA
NITRILE, ELASTOMERE
Épaisseur Thickness 350 µm
GrammageWeight 450 g/m²
ConditionnementPackaging
Par 1010 pcs
Dimensions standard (L x H)Standard dimensions (W x H) 90 x 115 cm
Tablier OMEGA
BleuBlue
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
26 Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS DE TRAVAIL WORK APRONS
Vert Green
BleuBlue
RougeRed
Orange
BlancWhite
JauneYellow
POLYURETHANE
Épaisseur Thickness 200 µm 300 µm
GrammageWeight 230 g/m² 345 g/m²
ConditionnementPackaging
Par 1010 pcs
Dimensions standard (L x H)Standard dimensions (W x H)
90 x 125 cm90 x 135 cm90 x 145 cm
Tablier DELTA MONOBLOC
DELTA MONOBLOC : film polyuréthane / TPU film Polyuréthane sans support. Résistance aux graisses animales, au sang, aux produits d’entretien courant. Très lisse, brillant, se nettoie facilement. Ne durcit pasPolyurethane without support. Good resistance to meat, fats, blood and standard cleaning products. Very smooth, bright, easy to clean. Does not harden.
Tablier LAVABLE et RÉUTILISABLE. Jetez moins !
WAShABLE and REUSABLE. End up with disposable!
MONOBLOC
100%
HYGIÈNIQUE
NF EN ISO 13688
27
TABLIERS DE TRAVAIL WORK APRONS
Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
Épaisseur Thickness 300 µm 500 µm
GrammageWeight 355 g/m² 600 g/m²
ConditionnementPackaging
Par 1010 pcs
Par 1010 pcs
Dimensions standard (L x H)Standard dimensions (W x H) 90 x 115 cm
Tablier DELTA
DELTA : film polyuréthane / TPU film Polyuréthane sans support. Résistance aux graisses animales, au sang, à l'acide lactique et aux produits d’entretien courants. Très lisse, brillant, se nettoie facilement. Ne durcit pas.Polyurethane without support. Good resistance to meat fats, blood, lactic acid and standard cleaning products. Very smooth, bright, easy to clean. Does not harden.
POLYURETHANE
1. AVEC ŒILLETS NICKEL-FREE with metal eyelets
Le tablier DELTA est disponible en deux versions :DELTA apron is available in two versions :
Vert Green
BleuBlue
BleuBlue
NoirBlack
Marron Brown
RougeRed
Orange
BlancWhite
BlancWhite
JauneYellowHARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
2. AVEC ŒILLETS THERMO-SOUDÉS with thermo welded eyelets
f Sans pièce métallique / without metal parts f Meilleure hygiène / better hygiene f Meilleure résistance / better resistance.
NF EN ISO 13688
28 Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS DE TRAVAIL WORK APRONS
DELTA à manches / with sleeves 100% polyuréthane. Totalement assemblé par soudures étanches.Adapté à l'utilisation dans les industries agroalimentaires.100% polyurethane. Totally assembled by waterproof welds. Suitable for use in food industries.
Épaisseur Thickness 200 µm
GrammageWeight 230 g/m²
ConditionnementPackaging
Par 1010 pcs
Dimensions standard (L x H)Standard dimensions (W x H)
90 x 130 cm (S - M)100 x 140 cm (L - XL)
Tablier DELTA à manches
BleuBlue
NOUVEAU100% PU
NEW100% PU
Serrage poignet intégré élastiqueIntegrated elastic wrist fastening
Fixation par nouage de la ceintureClosure made by tying up the belt
POLYURÉTHANE
NF EN ISO 13688
BlancWhite
29
TABLIERS DE TRAVAIL WORK APRONS
Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
JULIET avec ou sans manches / with or without sleeves Polyuréthane sur support jersey polyamide. Résiste aux produits d’entretien courants. Apprécié pour sa souplesse, sa légèreté et son excellente résistance à la déchirure.Polyurethane on polyamide jersey support. Resistance to standard cleaning products. Valued for its flexibility, its lightness and excellent tear resistance.
Tablierapron
Tablier à manchesapron with sleeves
Épaisseur Thickness 400 µm
GrammageWeight 170 g/m²
ConditionnementPackaging
Par 1010 pcs
Par 11 pcs
Dimensions standard (L x H)Standard dimensions (W x H) 90 x 115 cm S / M / L
Tablier JULIET
Juliet avec manchesJuliet with sleevesJuliet / Juliet
Serrage néoprèneNeoprene fastening
POLYURETHANE
BleuBlue
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
NF EN ISO 13688
Vert Green
RougeRed
BlancWhite
JauneYellow
30 Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS DE TRAVAIL WORK APRONS VINYLE
Serrage élastiqueElastic fastening
ROMEO avec ou sans manches / with or without sleeves Vinyle sur support jersey polyester. Résiste aux produits d’entretien courants. Tablier à manches apprécié par les éleveurs en salle de traite.Vinyle on polyester jersey support. Resistant to standard cleaning products. Apron with sleeves, ideal for milking.
Tablierapron
Tablier à manchesapron with sleeves
Épaisseur Thickness 500 µm
GrammageWeight 380 g/m²
ConditionnementPackaging
Par 1010 pcs
Par 11 pcs
Dimensions standard (L x H)Standard dimensions (W x H) 90 x 115 cm S / M / L
Tablier ROMEO
Romeo avec manchesRomeo with sleevesRomeo / Romeo
BleuBlue
APPRÉCIÉpar les éleveurs
Most popularamong farmers
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
BlancWhite
31
TABLIERS DE TRAVAIL WORK APRONS
Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
Tablierapron
Tablier à manchesapron with sleeves
Épaisseur Thickness 300 µm
GrammageWeight 325 g/m²
ConditionnementPackaging
Par 1010 pcs
Par 11 pcs
Dimensions standard (L x H)Standard dimensions (W x H)
70 x 100 cm 90 x 115 cm S / M / L
Tablier GOLF 30
Golf 30 / Golf 30 Golf 30 avec manchesGolf 30 with sleeves
VINYLE
APPRÉCIÉen poissonnerie
Vert kakiGreen khaki
Vert Green
Most popularin fisheries
NF EN ISO 13688
Serrage élastiqueElastic fastening
GOLF 30 avec ou sans manches / with or without sleeves Vinyle enduit deux faces sur support polyester. Résiste aux produits d’entretien courants.Vinyl both sides coated on polyester support. Resistant to standard cleaning products.
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
BleuBlue
NoirBlack
BlancWhite
32 Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS DE TRAVAIL WORK APRONS VINYLE
HOTEL : vinyle
Vinyle enduit 2 faces sur support coton. Utilisé dans les étalages, pour l’hôtellerie et la plonge.Vinyl two sides coated on cotton support. Used by hotel industry and for washing up.
Épaisseur Thickness 380 µm
GrammageWeight 170 g/m²
ConditionnementPackaging
Par 1010 pcs
Dimensions standard (L x H)Standard dimensions (W x H) 75 x 100 cm
Tablier HOTEL
YANKEE : vinyle
Vinyle sans support. Utilisé pour les travaux courants. Idéal pour la plonge.Vinyl without support. Used for light works. Great for washing up.
Épaisseur Thickness 200 µm 350 µm
GrammageWeight 275 g/m² 475 g/m²
ConditionnementPackaging
Par 1010 pcs
Dimensions standard (L x H)Standard dimensions (W x H)
75 x 100 cm 90 x 115 cm
Tablier YANKEE
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
BleuBlue
BlancWhite
BlancWhite
33
TABLIERS DE TRAVAIL WORK APRONS
Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
Épaisseur Thickness 400 µm
GrammageWeight 460 g/m²
ConditionnementPackaging
Par 1010 pcs
Dimensions standard (L x H)Standard dimensions (W x H) 90 x 115 cm
Tablier GOLF 40
VINYLE
GOLF 40 Vinyle enduit deux faces sur support polyester. Résiste aux produits d’entretien courants.Vinyl both sides coated on polyester support. Resistant to standard cleaning products.
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
GOLF 40 est également disponible avec œillets thermo-soudés
GOLF 40 is also available with thermo welded eyelet
BleuBlue
BlancWhite
JauneYellow
34 Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS DE TRAVAIL WORK APRONS
PROTECTION MÉCANIQUEMEChANICAL PROTECTION
Épaisseur Thickness 1 050 µm
GrammageWeight 1 200 g/m²
ConditionnementPackaging
Par 55 pcs
Dimensions standard (L x H)Standard dimensions (W x H) 90 x 115 cm
Tablier KILO
GrisGrey
KILO : hypalon
Hypalon sur support polyester. Très épais pour travaux durs. Excellente résistance à l’abrasion. Tissu bi-colore, face extérieure grise et face intérieure de couleur variable.Hypalon material on polyester support. Very thick for heavy duty use. Very high resistance to abrasion. Two-colored fabric, outside is grey, inside color may vary.
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
Montage recommandéRecommended fitting
NF EN ISO 13688
35
TABLIERS DE TRAVAIL WORK APRONS
Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
SIERRA : vinyle
Vinyle enduit deux faces sur support polyester.Tablier de protection chimique réutilisable.Vinyl coated two sides on polyester support. Suitable for chemical industry and engineering.
Épaisseur Thickness 630 µm
GrammageWeight 750 g/m²
ConditionnementPackaging
Par 1010 pcs
Dimensions standard (L x H)Standard dimensions (W x H)
90 x 120 cm100 x 120 cm
Tablier SIERRA
BlancWhite
Marron Brown
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
HARNAIS
HARNAIS
AUTOMATIQUE
ÉCONOMIQUE STANDARD
AUTOMATIQUE STANDARDÉCONOMIQUE
H A É S
PROTECTION CHIMIQUEChEMICAL PROTECTION
CertifiéCatégorieIIINF EN ISO 13688NF EN 13034 + A1 type PB [6] NF EN 14605 + A1 type PB [3]
36 Avril 2019 - Photos et documents non contractuels / April 2019 - Documents and pictures inside are non-contractual
TABLIERS DE TRAVAIL WORK APRONS
S-PROTEC® PLUS : film polyéthylène
Tablier de protection chimique spécifiquement adapté à la préparation des bouillies phytopharmaceutiques. The S-PROTEC® PLUS is a chemical-protective apron, especially adapted for preparation of phytopharmacological pulps.
Taille unique, facile à ajusterS’enfile et se retire facilement
Lavable et réutilisableSingle size
Easy to put onWashable and reusable
PROTECTION PHYTOSANITAIREPhYTOSANITARY PROTECTION
CertifiéCatégorieIIINF EN ISO 13688EN ISO 27065NF EN 14605 + A1 type PB [3]
Épaisseur Thickness 125 µm
GrammageWeight 98 g/m²
ConditionnementPackaging
Nous contacter Contact us
Dimensions standardStandard dimensions
Taille unique Single size
Tablier S-PROTEC® PLUS
Vert Green
ISO 27065C3
PB[3]
Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual 37
MANCHETTES OVERSLEEVESNITRILE - POLYURETHANE - VINYLE
ALFA - Nitrile BRAVO - Nitrile
Épaisseur Thickness 550 µm
Grammage Weight 600 g/m²
Longueur Length 50 cm
Serrage poignetWrist fastening
élastique / elastic
Serrage avant-brasForearm fastening
élastique / elastic
Épaisseur Thickness 500 µm
Grammage Weight 600 g/m²
Longueur Length 50 cm
Serrage poignetWrist fastening
élastique / elastic
Serrage avant-brasForearm fastening
élastique / elastic
BlancWhite
BlancWhite
BleuBlue
Épaisseur Thickness 200 µm
Grammage Weight 230 g/m²
Longueur Length 45 cm
Serrage poignetWrist fastening
élastique / elastic
Serrage avant-brasForearm fastening
élastique / elastic
DELTA - 100% PU
BleuBlue
NOUVEAU / NEW
MANCHETTES - OVERSLEEVES
38 Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual
MANCHETTES OVERSLEEVES NITRILE - POLYURETHANE - VINYLE
Épaisseur Thickness 300 µm
Grammage Weight 325 g/m²
Longueur Length 50 cm
Serrage poignetWrist fastening
élastique ou bord-côtes / elastic or knit
Serrage avant-brasForearm fastening
élastique ou bord-côtes / elastic or knit
Épaisseur Thickness 400 µm
Grammage Weight 460 g/m²
Longueur Length 40 cm
Serrage poignetWrist fastening
néoprène / neoprene
Serrage avant-brasForearm fastening
élastique / elastic
GOLF 30 - Vinyle GOLF 40 - Vinyle
Vert kakiGreen khaki
Vert Green
BleuBlue
NoirBlack
BlancWhite
BleuBlue
BlancWhite
JauneYellow
JULIET - Polyurethane ROMEO - Vinyle
Épaisseur Thickness 400 µm
Grammage Weight 170 g/m²
Longueur Length 40 cm
Serrage poignetWrist fastening
néoprène / neoprene
Serrage avant-brasForearm fastening
élastique / elastic
Épaisseur Thickness 500 µm
Grammage Weight 380 g/m²
Longueur Length 50 cm
Serrage poignetWrist fastening
élastique / elastic
Serrage avant-brasForearm fastening
élastique / elastic
BleuBlue
BleuBlue
Vert Green
RougeRed
BlancWhite
BlancWhite
JauneYellow
Avril 2019 - Photos et document non contractuels / April 2019 - Document and pictures inside are non-contractual 39
NORMES ET DIRECTIVES / NORMS AND REGULATIONS
Résistance à la pénétration
Stab resistant
Résistance à la coupure Cut resistant
Risques chimiques Chemical hazards
Risques pesticides Pesticide hazards
Alimentarité Food contact
Les fiches techniques ainsi que les documents justifiant les normes et directives sont disponibles sur demande auprès du service commercial.Technical sheets as well as documents about norms and regulations are available upon request addressed to the sales department.
RÉFÉRENCE DÉSIGNATION
NF EN 13688 Vêtements de protection. Exigences générales / Protective clothing. General requirements
NF EN 13034 + A1
Vêtements de protection contre les produits chimiques liquides. Exigences relatives aux vêtements de protection chimique offrant une protection limitée contre les produits chimiques liquides (Équipement de type 6 et type PB(6)) / Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (type 6 and type PB (6) equipment)
NF EN 14325
Vêtements de protection contre les produits chimiques. Méthode d’essai et classification de performance des matériaux, coutures, jonctions et assemblages des vêtements de protection chimique / Protective clothing against chemicals. Test methods and performance classification of materials, seams, joins and assemblages of chemical protective clothing§4.4 : Résistance à l’abrasion / Abrasion resistance§4.7 : Résistance au déchirement trapézoïdal / Trapezoidal tear resistance§4.9 : Résistance à la traction / Tensile strength§4.10 : Résistance à la perforation / Puncture resistance
NF EN 14605 + A1
Vêtements de protection contre les produits chimiques liquides - Exigences de performances relatives aux vêtements dont les éléments de liaison sont étanches aux liquides (Type 3) ou aux pulvérisations (Type 4), y compris les articles d’habillement protègeant seulement certaines parties du corps (Types PB (3) et PB (4)) / Protective clothing against liquid chemicals - Performance requirements for clothing with connecting elements that are liquid-tight (Type 3) or spray-tight (Type 4), including clothing protecting only certain parts of the body (Types PB (3) and PB (4))
EN ISO 27065Habillement de protection. Exigences de performance pour les vêtements de protection portés par les opérateurs appliquant des pesticides et pour les travailleurs de rentrée / Protective clothing. Perdormance requirements for protective clothing worn by operators applying pesticides and for re-entry workers.
NF EN 1082-1 Vêtements de protection. Gants et protège-bras contre les coupures et les coups de couteaux à main / Protective clothing. Gloves and armguards protecting against cuts and stabs by hand knivesISO 13999-1
NF EN 1811 + A1Méthode d’essai de référence pour la libération du nickel par des produits qui sont destinés à venir en contact direct et prolongé avec la peau / Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
NF EN 14328Vêtements de protection. Gants et protège-bras protégeant contre les coupures par des couteaux électriques. Exigences et méthodes d’essai / Protective clothing. Gloves and armguards protecting against cuts by powered knives. Requirements and test methods
NF EN ISO 13998Vêtements de protection. Tabliers, pantalons et vestes de protection contre les coupures et les coups de couteaux à main / Protective clothing. Aprons, trousers and vests protecting against cuts and stabs by hand knives
L'Union Européenne a mis en place le réglement (UE) EPI 2016/425 qui définit les exigences en matière de sécurité que les EPI (Équipement de Protection Individuelle) doivent satisfaire afin de préserver la santé et d’assurer la sécurité des utilisateurs.Les risques sont classés en 3 catégories principales : risques mineurs, risques graves et risques majeurs. Pour couvrir ces catégories, les équipements de protection individuelle (EPI) suivent le même classement :
Catégorie I : EPI de protection simple, risques mineurs. Auto-certification CE Catégorie II : EPI destinés à protéger contre les dangers non mortels, risques graves. Certification par organisme notifié. Catégorie III : EPI de conception complexe, destinés à protéger contre les risques majeurs et irréversibles. Certification par un
organisme notifié, assurance qualité, maintenance et formation obligatoires.
The European Union approved the (EU) PPE 2016/425 regulation. This regulation applies to PPE (Personal Protective Equipment). It lays down the conditions governing its placing on the market and free movement within the Community and the basic safety requirements which PPE must satisfy in order to ensure the health protection and safety of users.Personal Protective Equipments covered by this directive are divided into 3 categories: ‘Simple’ design, ‘Intermediate’ design and ‘Complex’ design.In order to cover these categories, the same ranking is used for Personal Protective Equipment (PPE):
Category I: simple protection PPE for minor risks. CE Auto-certification Category II: PPE aimed at protecting against non-lethal dangers, serious risks. Certification is made by an authorized organism. Category III: Complex protection - PPE for protection against lethal dangers or serious and irreversible injury. Certification is made
by a notified body, with EC quality control system for the final product II and System for ensuring EC quality of production by means of monitoring, as well as training.
Courrier / post mail : MANULATEX FRANCE - CS 40055 - 49170 Saint Georges sur LoireUsine / factory : MANULATEX FRANCE - ZA du mille - 49123 Champtocé sur LoireTel. +33 (0)2 41 39 90 30Fax. +33 (0)2 41 39 99 11Email : [email protected] web / website : www.manulatex.com