10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
1
MOT DU COMITE D’ORGANISATION
Le laboratoire d’Ingénierie d’Électrochimie, de Modélisation et d’Environnement (LIEME)
est une structure de recherche accréditée depuis 2010. Domicilié à la Faculté des Sciences
Dhar El Mahraz, Université Sidi Mohamed Ben Abdellah – Fès, ce laboratoire est composé
de 3 équipes de recherche : Electrochimie, Modélisation et Effluents Industriels &
Caractérisation et Traitement.
De par ses compétences et sa pluridisciplinarité, le laboratoire LIEME vise :
- d’une part, à contribuer au développement scientifique, technologique, économique et
social à l’échelle régionale, nationale et internationale en traitant des thématiques dans les
domaines d’électrochimie analytique et de la corrosion, de l’environnement, en particulier
le traitement et la valorisation des eaux usées et des déchets ainsi que la modélisation et
l’optimisation des conditions opératoires, de la qualité des eaux et leur impact sur la santé.
Toute ces thématiques s’inscrit dans le champ disciplinaire et de recherche centré sur le
compostage et les matériaux de construction ;
-d’autre part, à encourager et de soutenir les actions de formation et de recherche
répondant aux besoins des étudiants-chercheurs.
Les Rencontres Nationales d’Electrochimie, qui se tiennent régulièrement tous les deux ans
depuis 1998, sont devenues un rendez-vous scientifique incontournable. La 10ème
édition de
ces journées sera organisée au centre de conférences AL AKHAWAYN, les 18 et 19 Avril
2019.
L’électrochimie, une composante essentielle de la chimie moderne, connait un essor
considérable tant au niveau de l’investigation qu’au niveau logistique. En effet, la qualité
de la caractérisation et des interprétations émises permettent, à présent, d’explorer des
domaines scientifiquement difficiles à aborder. Mieux encore, l’électrochimie a permis
l’approfondissement de certains phénomènes physicochimiques et a suggéré d’autres
approches permettant de mieux comprendre les lois et les mécanismes qui les régissent et,
par voie de conséquence d’optimiser la gestion les déchets produits par le traitement et le
recyclage qui constituent les piliers de l'économie circulaire et le développement durable.
Dans cette optique, la 10ème
édition RNE’10, intervient pour révéler l’apport scientifique de
ces dernières années, aux niveaux national et international de cette chimie moderne à
multiples facettes. Tout au long de cette manifestation, il sera question d’un large éventail
de thèmes tous liés à l’utilisation et l’exploitation des données électrochimiques, à
l’identification et la caractérisation des déchets exploitables et à l'évaluation de leur
stabilité physique, chimique. Ces journées seront animées par des professeurs et des
chercheurs émérites dans le domaine de l’électrochimie et ses applications ainsi que dans le
domaine de l'environnement. Ces différentes interventions seront revêtiront la forme de
conférences, de communications orales et d’affichées et de tables rondes.
Comité d’organisation
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
2
REMERCIEMENTS
Au nom du Comité d’Organisation, on s’exprime, nos sincères gratitudes à l’égard de la Présidence
des Universités et en particulier :
Pr. Radouane MRABET: Président de l'Université Sidi Mohamed Ben Abdellah – Fès.
Pr. Azzedine El MIDAOUI: Président de L’Université Ibn Tofaïl de Kénitra’ – Kenitra.
Pr. Driss OUAOUICHA: Président de L’Université Al Akhawayn – Ifrane.
Nos vifs remerciements sont également exprimés envers la Faculté des Sciences Dhar El Marhaz-
FSDM - Fès et la faculté des Science - Rabat, et en particulier :
Pr. Mohammed BELAMLIH : Doyen de la faculté des Sciences Dhar ElMahraz,
Pr. EL Mourad BELKACEMI: Doyen de la faculté des Sciences - Rabat
Pr. Mohammed EL HASSOUNI : Vice Doyen de la recherche, FSDM.
Pr. Abdelghani LACHQUAR : Vice doyen chargé des affaires pédagogiques et estudiantines,
FSDM.
Aucun mot ne pourrait exprimer nos vives gratitudes au Coordonnateur de RNE’10 le Pr.
Mustapha TALEB : Directeur du Laboratoire d’Ingénierie d'Electrochimie, de Modélisation et
d’Environnement-LIÉME et pour avoir pris de son précieux temps, sa patience et ses efforts déployés
pour mettre au point cette rencontre en bonne valeur et qualité.
Merci aux membres du comité d’organisation et comité scientifique pour leurs contributions à cette
manifestation. Nous citons en particulier les co-coordonateurs de la RNE’10 Pr. Zakia RAIS et Pr.
Mouhcine SFAIRA, et les locomoteurs de cette rencontre le Pr. Noureddine ELOUTASSI et le Dr.
Fadoua EL-HAJJAJI membres associés au laboratoire LIÉME. Aussi, sans oublier le Pr. Majda
YAMNI et le Doctorant AbdelIllah MARSOUL pour leurs efforts remarquables.
Nous remercions très chaleureusement aussi bien les conférenciers, qui, en dépit de leurs tâches
quotidiennes ont consenti d’énormes efforts et cela dans le bénévolat pour s’associer à l’animation de
cette rencontre, que les auteurs de communications venus de loin ou de près pour partager cet
important événement.
Nous remercions également les doctorants qui ont tous apporté une aide précieuse et déterminante et
ont fait un travail de fourmis lors de la préparation de cette rencontre dans un temps record.
Enfin, nous saisissons cette opportunité pour remercier les organismes et personnalités qui ont
sponsorisé cette manifestation: la présidence de l’USMBA, la présidence de AL AKHAWAYN, le
Laboratoire LIEME de la FSDM, l'Association Marocaine d'Interfaces et Sciences de
l'Environnement AMISE, la région de Fès-Meknès, la commune de Fès, les 6 arrondissements de la
ville de Fès: les mérinides, Fès médina, Jnan El Ouard, Zougha, Fès Agdal, Sais,
Pour ceux que nous avons omis de citer et de remercier, qu’ils nous excusent.
Chairman de la RNE’10
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
3
COMITE D'HONNEUR
MRABET Radouane : Président de l’USMBA – Fès
El MIDAOUI Azzedine: Président de L’UIT – Kenitra
OUAOUICHA Driss: Président de L’Université Al Akhawayn
BENLEMLIH Mohammed : Doyen de la FSDM–Fès
EL BELKACEMI Mourad: Doyen de la FS-Rabat
ELHASSOUNI Mohammed : Vice Doyen chargée de la Recherche Scientifique et de la Coopération FSDM-Fès
ELACHQAR Abdelrhani : Vice Doyen chargé des Affaires Pédagogiques et Estudiantines FSDM–Fès
COMITE D'ORGANISATION
A. Aouniti
A. Abdellaoui
A. Bellaouchou A.
Chetouani
A. Lahkimi
A. Taleb
A. Marsoul
A. Kherbache
A. Zarrouk
A. Daoudi
F. El-Hajjaji
F. Jeffali
F. Zerrouq
H. Oudda
H. Darhmaoui
I. Zorkani
K. Haboubi
M. Errasfa
T. Ainane
K. Draoui
k. Lahlou
Z. Majbar
S. Alaoui Mrani
N.Arrouse
FS Oujda
FSDM Fès
FS Rabat
FS Oujda
FSDM Fès
FS Mohamadia
FST Fès
EST Fes
FS Oujda
FSDM Fes
FSDM Fès
EST Oujda
EST Fes
FS Kénitra
U. Al-Akhawayn
FSDM Fès
ENSA Al Hoceima
F. Médecine Fes
EST Khenifra
FS Tétouan
FSDM Fès
FSDM Fès
FSDM Fès
FSDM Fès
L. Benallal
M. El-Haji
M. Chaouch
M. Sfaira
M. Taleb
M. EbnTouhami
M. Filali Baba
M. Yamni
M. Znini
A. Maghnouj
N. Lahbabi
N. Eloutassi
R. Touzani
S. Elkadiri
S. Hamdi
Y. Mourad
Z. Rais
R. Salghi
H Nassali
S. El-Hajjaji
R. Salim
E. Ech-Chihbi
F.Z. El Madani
H. Mikdame
FST Tanger
ENSEM Casa
FSDM Fès
FSDM Fès
FSDM Fès
FS Kénitra
FSDM Fès
FSDM Fès
FST Errachidia
FSDM Fès
FSDM Fès
CRMEF FSDM Fès
FS Oujda
FS Oujda
IP Casa
EST Fès
FSDM Fès
ENSA Agadir
FS Kénitra
U. Al Akhawayn
FSDM Fès
FSDM Fès
FSDM Fès
FSDM Fès
COMITE SCIENTIFIQUE
A. Amine FST Mohammedia M. Cherkaoui FS Kénitra
M. Azzi FS Ain chock A. Derja EST Safi
S. Belcadi MASCIR K. El Kacemi FS Rabat
A. Ben Bachir FS Rabat M. El Meray FS Marrakech
A. Benyaich FS Marrakeh A. Laachach ENIM Rabat
A. Guenbour FS Rabat K.R. Temsamani FS Tétouan
M. Hamdani FS Agadir A. Irhzo FS Ain chock
B. Hammouti FS Oujda M. Taleb FSDM Fès
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
4
BIOGRPHIES
&
RÉSUMÉS DES
CONFÉRENCES
CONFERIENCIER COORDONNEES PAGE
Jean Michel LAMEILLE Université Pierre et Marie Curie - Paris Jussieu.
Ghislain LOUIS IMT Lille Douai. [email protected] 07
Aziz AMINE Faculty of Sciences and Techniques Hassan II University
of Casablanca, Morocco. [email protected] 10
Charafeddine JAMA l’Ecole Nationale Supérieure de Chimie de Lille (ENSC
Lille). [email protected] 12
Nor-Edine ABRIAK
Ecoles des mines de Douai - France / associé à l’université
de Sherbrooke (Canada), nor-edine.abriak@imt-lille-
douai.fr
14
Marie-Georges Marjorie OLIVIER Faculté Polytechnique de Mons (Belgique).
Khaled.F. KHALED Ain Shams University & Taif University Associate
Professor. [email protected] 19
Mohamed HAMDANI Universités à Faculté des Sciences d’Agadir
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
5
Professeur Jean Michel LAMEILLE
Enseignant/Chercheur : Université Pierre et Marie Curie -
Paris Jussieu.
Docteur en Sciences Physique
Président de la Société Francophone des Spectroscopies
d’Electrons (SFSE-ELSPEC)
e-mail : [email protected]
RESPONSABILITES COLLECTIVES
Depuis septembre 1989, Enseignant pour le Master « M2 Couches minces et
management industriel » de l’Université Paris-Saclay, (Cours sur les techniques de
caractérisation des surfaces)
Président de la SFSE-ELSPEC (Société Francophone des Spectroscopie d’Electrons)
Président fondateur de la conférence ELSPEC depuis 2004
De janvier 1985 à mars 1988 - CEA - ingénieur à l’Institut de Protection et de Sûreté
Nucléaire, en charge des déchets conditionnés dans les liants hydrauliques.
De Mars 1988 à juin 2003 - CEA - Chef de laboratoire de caractérisation des surfaces par
les microscopies électroniques et les spectroscopies d’électrons.
de 2003 à 2019 - CEA - Ingénieur-chercheur dans le domaine de la corrosion.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
6
CONFERENCE PLÉNIÈRE 1
LES SPECTROSCOPIES D’ELECTRONS, LA METALLURGIE, LA CORROSION
Pr. Jean-Michel LAMEILLE
RESUME :
Les spectroscopies d’électrons trouvent une partie importante de leurs applications dans les
grands domaines de la corrosion et de la métallurgie. Pour mettre en évidence les phénomènes
impliqués dans les mécanismes d’évolution des surfaces de la métallurgie ou plus
particulièrement pour définir les mécanismes de corrosion, en plus des techniques spécifiques
d’électrochimie, les techniques de caractérisation des extrêmes surfaces apportent des
informations incontournables. Elles permettent de déterminer les compositions superficielles des
alliages sachant que la composition de la surface des alliages est souvent différente de celle du
volume. Les molécules adsorbées quelles soient inorganiques, organiques ou de type
biomolécules, sont les premières manifestations dans l’interaction des surfaces avec
l’environnement. Les surfaces métalliques sont très souvent recouvertes de couches d’oxyde
quelles soient de protection, c’est le cas de la passivation ou quelles soient le produit de
phénomènes de corrosion. L’épaisseur, la composition chimique et la cinétique de croissance des
couches d’oxyde peuvent être suivies par XPS et pour certains aspects par spectroscopie des
électrons AUGER. Ainsi, nous présenterons quelques applications de l’XPS à l’étude des
mécanismes de passivation des métaux et alliages, de la dissolution sélective des alliages et de la
protection par des inhibiteurs de corrosion.
Nous présenterons également quelques éléments illustrant la problématique des traitements de
surfaces que cela soit du point de vue de la surface initiale ou du revêtement lui-même. Encore,
les caractérisations des surfaces sont des composantes importantes de leur mise au point.
Spectres XPS : film de passivation sur un alliage 316 L
Etats chimiques des éléments dans le film passif : Cr 3+
; Fe3+
; Mo6+
et Mo4+
Enrichissement en chrome de 32% ; Pas de Ni dans la couche et Epaisseur de la couche ~ 2nm
P. Marcus
(2015)
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
7
Professeur Ghislain LOUIS
Enseignant /Chercheur IMT Lille Douai
Thématique de recherche : Indentation instrumentée/ Maîtrise
de la durabilité (Corrosion)
Laboratoire de Génie Civil et géo-Environnement (LGCgE)
Courriel : [email protected]
Poste : MCF
i
RESPONSABILITES COLLECTIVES
Responsable du pole Analyse Physique
Enseignement :
Corrosion
Traitement de surface
THEMATIQUE:
Indentation instrumenté
Maîtrise de la durabilité (Corrosion)
PRODUCTION SCIENTIFIQUE
2008-2018 : 14 publications internationales
Brevets :
- Brevet FR 06 05133 (2007) « Composition d’aciers pour usages spéciaux »,
PETELOT D., LEYER J., VANDENBERGHE, LEPINGLE V., LOUIS G.
- - Brevet International WO 2007/141427 « Steel compositions for special uses »
PETELOT D., LEYER J., VANDENBERGHE, LEPINGLE V., LOUIS G.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
8
CONFERENCE PLÉNIÈRE 2
ROLE DE L’ELECTROCHIMIE DANS L’EXPERTISE
INDUSTRIEL EN CORROSION
Prof. LOUIS Ghislain
RESUME :
L'électrochimie joue un rôle important dans un grand nombre de domaines industriels ou de
recherche. Par son lien avec les grandeurs électriques, intensité et courant, elle permet de
caractériser ou de contrôler des réactions chimiques. Elle ouvre ainsi de nombreuses possibilités
d’études dans les domaines de l’analyse, énergie, environnement, matériaux, corrosion,
traitement de surface,….
La surface métallique peut être par exemple modifiée par des traitements électrochimiques
(électrodéposition, anodisation,….) pour améliorer sa résistance vis-à-vis des environnements
agressifs. Par ailleurs, les surfaces métalliques peuvent être soumises à des phénomènes
électrochimiques destructeurs appelés corrosion.
La corrosion des métaux (purs ou en alliages) s’effectue par attaque électrochimique suivant des
règles générales bien connus. On peut donc en principe en prévoir les circonstances et définir les
facteurs d’action visant à l’empêcher (anticorrosion) à partir d’études électrochimiques.
Cependant, les durées de contact métal / solution mises en jeu dans la production des
phénomènes de corrosion sont considérablement plus grandes que pour la durée des études
électrochimiques. De la sorte, une vitesse d’attaque considérée comme extrêmement faible à
l’échelle de ces études peut néanmoins conduire à des effets de corrosion importants au bout d’un
temps suffisamment long.
L’interprétation de ces effets s’avère donc beaucoup plus difficile à établir que le laissent
supposer les raisonnements précédents. Mais ces derniers fournissent tout de même de très utiles
indications, notamment sur les moyens à mettre en œuvre pour restreindre au maximum les effets
de corrosion (par exemple, en provoquant la passivation du métal, en le protégeant par une anode
réactive, etc.).
Des nombreuses recherches menées depuis plusieurs années par l’IMT Lille Douai, ont utilisés
différentes techniques électrochimiques afin de contrôler ou de comprendre les phénomènes de
corrosion tel que :
- Etude du début de fissuration par changement du potentiel redox de l’échantillon
- Suivie de corrosion de structures métalliques dans le Tunnel sous la manche (suivie du
potentiel des armatures)
- Choix d’un matériau résistant à la corrosion par piqures
Mots clés : électrochimie, expertise industriel, corrosion
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
9
Professor of biochemistry, Faculty of Sciences and Techniques
Hassan II University of Casablanca, Morocco
Ph.D., The Free University of Brussels, 1993
Research focuses on sensors, biosensors, and their use in
analytical chemistry.
PRODUCTION SCIENTIFIQUE ET ACTIVITES COLLECTIVES
Publications (Google Scholar)
170 papers
6308 citations
H-index of 43
Coordinated several national and international research projects.
Chair of the International Workshop “Biosensors for Food Safety and Environmental
Monitoring” organized every two years in Morocco (www.biocap.ma).
Chair of the Meeting “Journées Pratiques Francophones des Sciences
Analytiques ” organized every year in Marrakech (www.jpfsa.org)
Reviewer for several scientific international journals. Editor of Biosensors & Bioelectronics
journal (IF 8.2).
Professeur AZIZ AMINE
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
10
CONFERENCE PLÉNIÈRE 3
RECENT APPLICATIONS OF ELECTROCHEMICAL SENSORS
BASED ON MOLECULARLY IMPRINTING POLYMERS
LES APPLICATIONS RECENTES DES CAPTEURS
ELECTROCHIMIQUES A BASE DE POLYMERES A EMPREINTES
MOLECULAIRES
Pr. AZIZ AMINE
ABSTRACT:
This conference focuses on the recent achievement related to the electrochemical sensors based
on molecularly imprinted polymers (MIPs) for various kinds of applications. MIPs based
electrochemical sensors have found a great interest especially during the last decade by the
researchers due to their high selectivity, high stability, great specific recognition abilities towards
the targeted analytes. One of the important parameter in electrochemical sensing strategies, which
should be improved, is the sensitivity of the proposed sensing system. Therefore, in order is to
enhance the sensitivity various kinds of highly conductive nanomaterials were incorporated
within the MIP film and thus leading to the development of highly selective and sensitive system.
In general, magnetic nanoparticles, AuNPs, MWCNTs, and graphene were the most used
nanomaterial combined to MIP films. Experimental results obtained with MIPs based sensors
developed in our laboratory for the detection of the endocrine disruptors such as bisphenol A,
sulfonamides and estradiol in various sample matrices at trace level will be presented. The main
current achievement as well as the current challenges regarding this field of research will be also
presented.
Keywords: electrochemical sensors, molecularly imprinting polymers
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
11
Professeur Charafeddine JAMA
Professeur universitaire à l’Ecole Nationale Supérieure de
Chimie de Lille (ENSC Lille).
Depuis Octobre 2011 Professeur des universités – ENSC
Lille.
1999 - 2011 Maître de conférences - ENSC Lille.
1990 – 1999 Ingénieur de Recherche – Université de Lille.
1989 - 1990 Ingénieur de recherche – ATOCHEM - Lacq.
DOMAINES DE SPECIALITE SCIENTIFIQUE
Traitement de surface
Revêtements multifonctionnels
Plasmas Froids
Couches minces
Méthodes électrochimiques & Corrosion
PRODUCTION SCIENTIFIQUE
Publications : 120
Brevets : 6
Communications : 250.
Indice H (selon SCOPUS) : 27
Nombre de citations : 2921
ACTIVITES COLLECTIVES
Depuis 2016 : Membre élu du Conseil d’Administration de l’ENSC Lille
Depuis 2002 : Membre élu du Conseil Scientifique de l’ENSC Lille
Editeur associé pour plusieurs Journaux Internationaux à Comité de lecture
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
12
CONFERENCE THEMATIQUE 1
RECENTS DEVELOPPEMENTS DANS LE DOMAINE DE
L’ELABORATION DE REVETEMENTS ANTICORROSION
Pr. CHARAFEDDINE JAMA
RESUME :
Les nouvelles réglementations qui visent à restreindre l’utilisation des prétraitements à base de
chrome hexavalent, fortement toxique, ont contribué au développement de nouveaux revêtements
anticorrosion. Ce travail présente les récents développements dans le domaine de l’élaboration de
revêtements en vue de conférer des propriétés d’anticorrosion aux aciers. Le but est d’obtenir des
dépôts homogènes, amorphes, denses, inertes, insolubles et efficaces. L’optimisation des
paramètres des procédés étudiés est réalisée par l’analyse des propriétés microstructurales des
couches obtenues. La structure physicochimique des films est étudiée par Infrarouge ATR, RMN
et microscopies électroniques. Le pouvoir protecteur des revêtements vis-à-vis de la corrosion est
évaluée par spectroscopie d’impédance électrochimique dans un milieu contenant NaCl (3%). La
performance anticorrosion des revêtements dépend très fortement de la qualité des couches
déposées et de leur adhérence au substrat. L’étude de différentes techniques d’apprêtage et de
préparation de la surface des substrats non revêtus sera également présentée.
Mot clés : anticorrosion, revêtement, chrome hexavalent
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
13
Professeur Nor-Edine ABRIAK
Professeur universitaire des écoles des mines de Douai -France
Professeur universitaire associé à l’université de Sherbrooke
(Canada),
Ingénieur ENSAIT de roubaix, Docteur en mécanique et
H.D.R en Science Mathématique,
Directeur adjoint du LGCGE : laboratoire de génie civil et de
géo-environnement (polytech de lille, université de lille,
université d’ARTOIS, HEI, ISA et IMT Lille-Douai)
DOMAINES DE SPECIALITE SCIENTIFIQUE
1991 à 2004 : responsable du Laboratoire de Mécanique des sols et du Laboratoire de
Mécanique des sols et roches de l’Ecole des Mines de Douai
De 2004 à ce jour : chef des laboratoires du département de Génie Civil et
Environnement de l’IMT Lille -Douai, France. En plus de cette responsabilité, il a été
nommé en 2005 Adjoint Chargé de la Recherche.
2015 : Directeur Adjoint du LGCgE
PRODUCTION SCIENTIFIQUE ET ACTIVITES COLLECTIVES
Ses recherches sont consacrées à la Mécanique et plus particulièrement aux milieux
granulaires issus des déchets, les sédiments marins et fluviaux.
Encadrement depuis 1991 : 50 thèses de Doctorat soutenues et 10 thèses en cours
Publications :
- 90 articles dans des revues à comité de lecture dont 53 dans des revues
internationales et 22 dans des revues nationales
- 171 communications aux congrès et colloques avec actes publiés dont 35 pays
dans le monde.
Participation à la rédaction de plusieurs ouvrages.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
14
CONFERENCE THEMATIQUE 2
LA CORROSION ET LE GENIE CIVIL
Pr. ABRIAK NOR-EDINE
RESUME:
Dans le monde, des sommes importantes sont dépensées pour lutter contre le phénomène de
corrosion dans les ouvrages de génie civil et ceci pour la réparation des structures endommagées
par ce phénomène, sans tenir compte des conséquences que peuvent avoir ces travaux de
construction et de réfection répétés sur l'environnement. La maintenance de ces ouvrages
représente 1 % par an du coût global d’un ouvrage. D’après la Fédération Nationale des Travaux
Public (FNTP), le coût augmente de 8 % par an. Les recherches et les études touchant à la
durabilité des bétons vis-à-vis de la corrosion dans le monde augmentent de plus en plus car la
lutte contre la corrosion conduit à des pertes économiques colossales engendrées par l’entretien et
les réparations. Dans un premier temps, on donnera un résumé général autour de la corrosion des
armatures dans les ouvrages en béton armé et les méthodes les plus employées pour les
diagnostiquer où la corrosion des armatures est la principale cause de détérioration. L’objectif de
la conférence est d’expliquer les mécanismes de la corrosion des armatures du béton, présenter
les techniques d’investigation pour la détection de la corrosion des armatures et l'évaluation de
son ampleur, expliquer les méthodes de réparation des ouvrages corrodés et enfin présenter les
principaux facteurs qui influent sur la durabilité vis-à-vis de la corrosion.
Enfin présenter les méthodes existantes au niveau international de réparation et de maintenance
ainsi que les méthodes de prévention utilisées pour étendre le plus possible la durée de vie des
ouvrages en béton armé. Nous exposerons quelques cas pratiques.
Mot clés : corrosion, génie civil, investigation
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
15
Professeur Marie-Georges Marjorie OLIVIER
1991 : Ingénieur Civil Chimiste - Faculté Polytechnique de
Mons (Belgique)
1996 : Docteur en Sciences Appliquées - Faculté
Polytechnique de Mons (Belgique)
DOMAINES DE SPECIALITE SCIENTIFIQUE
15/07/91 au 31/12/96 : Assistant de recherche dans le Service de Thermodynamique -
Physique mathématique de la FPMs dans le cadre d’un PAI (Pôle d’Attraction
Interuniversitaire)
Du 01/07/03 au 25/12/06 : Assistant dans le Service de Chimie générale et Electrochimie
et Chef de Travaux dans le Service de Chimie générale et Electrochimie de la Faculté
Polytechnique de Mons
Du 01/10/07 à ce jour : Chargé de cours et chef du Service de Science des Matériaux de la
Faculté Polytechnique de Mons et Coordinateur du Pôle Matériaux de la FPMs
Du 01/10/2012 au 30/09/2016 : Présidente de l’Institut en Science et Ingénierie des
Matériaux de l’Université de Mons et en 2018 : Vice-présidente de l’Institut en Science et
Ingénierie des Matériaux de l’Université de Mons.
PRODUCTION SCIENTIFIQUE ET ACTIVITES COLLECTIVES
14 thèses défendues
Nombre de thèses en cours : 4
Indicateurs Scopus (31 octobre 2018)
Nombre de publications : 117
Nombre de citations : 1722
H-index : 24
La liste des publications extraite du dépôt institutionnel de l’UMONS
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
16
CONFERENCE THEMATIQUE 3
MECANISMES DE PROTECTION APPORTEE A L’ACIER PAR UN
REVETEMENT EPOXY CHARGE EN HYDROTALCITES MODIFIES
PAR DIFFERENTS INHIBITEURS ORGANIQUES DE CORROSION:
ETUDE ELECTROCHIMIQUE
Pr. Marjorie OLIVIER
RESUME :
Cette étude s’inscrit dans le développement de revêtements organiques respectueux de
l’environnement pour la protection des substrats métalliques sans solvant et sans chromates. La
protection à la corrosion de l’acier au carbone est obtenue dans cette étude par synthèse
d’hydrotalcites intercalés avec des inhibiteurs présentant une fonction carboxylique ou
carboxylate et incorporés dans une résine époxy sans solvant.
Les inhibiteurs retenus sur base de leur efficacité électrochimique sont l’acide
benzothiazolytthiosuccinique, le benzoate de sodium et le sebacate de sodium. Les hydrotalcites
sont synthétisées par la méthode de co-précipitation et caractérisées par analyses FTIR et DRX
pour vérifier la position intercalaire des inhibiteurs. Leur morphologie est lamellaire (TEM) avec
des tailles de particules entre 200 et 500 nm.
Le relargage des inhibiteurs de corrosion en milieu chloruré agressif est déterminé (mesures TOC
et UV-Vis) en fonction du temps et pour différentes concentrations en chlorures. Les courbes de
polarisation anodiques indiquent que les hydrotalcites modifiées sont des inhibiteurs anodiques
efficaces (efficacité supérieure à 80%).
Les hydrotalcites modifiées sont incorporées et dispersées dans la résine époxy. Les
performances des revêtements sont évaluées par spectroscopie d’impédance électrochimique en
milieu neutre chloruré.
Les échantillons griffés ont également été exposés au test brouillard salin.
Les résultats seront discutés en considérant le nombre de groupes fonctionnels, la solubilité des
inhibiteurs de corrosion et les interactions avec l’hydrotalcite et le substrat métallique.
Mot cles : mecanismes de protection, acier, revetement, inhibiteurs organiques, corrosion
Résultats obtenus dans le cadre de la thèse de Nguyen Thuy Duong (2018)
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
17
Professor Khaled.F. KHALED
Ain Shams University & Taif University
Associate Professor
Chemistry Department, Faculty of Education, Ain Shams
University Chemistry Department, Faculty of Science, Taif
University
Distinguished Visiting Scholar
Chemistry Department, Rice University, (1999-2004)
PERSONNEL INFORMATION
March 2013: Taif University Scientific Research Prizes (Best Researcher, Best Citation, Best
Research),
December 2012: Editor-in Chief for Journal of Chemica Acta & Advances in Materials and
Corrosion.
November 2012: An oral presentation in the ICCPE conference held in Paris-France.
August 2012: TOP cited author in Electrochimica Acta – Prize from Elsevier.
May 2012: SAUDI CHEMICAL SOCIETY Prize for distinguished researchers. (1&2)
April 2012: Three prizes from Taif University (Golden Medal) for the best Scientific Researcher,
The best article and for scientific publishing. (pdf)
February 2012: Workshop on using computational tools in scientific research held in Princess
Norah bent Abdulrahman University – Riyadh – KSA
SCIENTIFIC PRODUCTION
Selected publications (last 5 years) : 10 international publications
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
18
CONFÉRENCE THEMATIQUE 4
COMPUTATIONAL AND ELECTROCHEMICAL
INVESTIGATION FOR CORROSION INHIBITION OF IRON BY
SOME PYRIMIDINE DERIVATIVES IN MOLAR HCL
Pr. Khaled. F. Khaled
The adsorption and corrosion inhibition behavior of four pyrimidine derivatives at iron electrode in
1.0 M HCl solutions were studied computationally by molecular dynamics simulations and
electrochemically by potentiodynamic polarization and electrochemical impedance spectroscopy.
All investigated pyrimidine derivatives have shown inhibiting properties for iron corrosion in 1.0M
HCl. The computational results indicate a strong dependence of the inhibition performance on the
structural effects of pyrimidine derivatives. Also, inhibition is due to the adsorption of the
pyrimidine derivatives on iron surface. Polarization curves indicated that these compounds act as
mixed-type inhibitors. Equivalent circuits for the studied system were investigated. Results
obtained from polarization and impedance measurements are in good agreement and confirm the
computational study.
Keywords: Corrosion; Corrosion Inhibition; Tafel Polarization; EIS; Molecular Dynamics.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
19
Professeur. Mohamed HAMDANI
Professeur des universités à Faculté des Sciences d’Agadir
Depuis 1986
Professeur d’électrochimie et des méthodes d’analyses
électrochimiques
Depuis 2014 coordination du master Gestion et traitements
des eaux
Professeur invité en France et au Brésil.
PRODUCTION SCIENTIFIQUE
Auteur d’une centaine d’articles dans les revues internationales
Encadrant d’une dizaine de thèse
THEMATIQUES DE RECHERCHE
Applications des procédés électrochimiques dans la dépollution des eaux usées
Etude des relations entre composition chimique, structure et les propriétés
électrocatalytiques résultantes sont au cœur de ses activités
Les problèmes de pollution de l'air et du sol
Les phénomènes de dégradation de matériaux par corrosion dans les milieux agressifs et
son inhibition sont également abordés au laboratoire
ACTIVITES COLLECTIVES
Projet Européen ERANET MED sur le traitement des effluents des unités industrielles
de textile.
Projets bilatéraux d'AI et conventions (France, Tunisie, Portugal, Egypte, Allemagne)
Editeur associé pour plusieurs Journaux Internationaux à Comité de lecture
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
20
CONFÉRENCE THEMATIQUE 5
APPLICATION DES PROCEDES ELECTROCHIMIQUES
DANS LES TRAITEMENTS DES EAUX USEES
Pr. Mohamed HAMDANI
RESUME :
Les procédés électrochimiques sont largement utilisés dans les traitements des polluants contenus
dans les eaux. Ils sont adaptés pour la production des oxydants puissants ou spécifiques en milieu
aqueux sur des matériaux d’anode adéquat pour éviter la corrosion et le dégagement de
l’oxygène.
En effet, les méthodes traditionnelles de traitement restent inefficaces dans le traitement des
solutions contenant les polluants organiques persistants (POS) qui constituent une menace
potentielle pour les ressources en eau. Par contre, les procédés d’oxydation avancée (POA) ont
été appliqués avec succès pour l’élimination de ces polluants.
Ces procédés sont basés sur la production in situ des radicaux hydroxyles (°OH), espèces très
oxydantes et fortement réactives. L’action oxydante de ces radicaux sur les produits organiques
conduit à leur minéralisation complète.
Les radicaux hydroxyles peuvent être générés en solution à traiter par électrochimie directe ou
indirecte. Dans l'électrochimie directe, les radicaux hydroxyles sont générés directement à la
surface d'une électrode à surtension élevée par l'oxydation de l'eau (oxydation anodique). Par
contre l'électrochimie indirecte utilise la réaction de fenton pour former ces radicaux. La réaction
de Fenton est donc assistée par électrochimie dans ce cas, car les réactifs de cette réaction (H2O2
et Fe2+) sont générés électrochimiquement d'une manière catalytique. Les procédés d'oxydation
avancée électrochimiques (POAE) ont montré, durant ces dernières années, leur capacité à
éliminer efficacement les polluants persistants (pesticides, chlorophénols, colorants, polluants
médicamenteux, etc.) comparativement aux procédés biologiques et/ou physico-chimiques [1-6].
Une étude comparative de différents systèmes électrochimiques utilisés dans la dégradation de
polluants sera présentée lors de cette présentation. Les paramètres gouvernant l'efficacité de ces
systèmes seront discutés. La capacité des POAE sera montrée sur des exemples de traitement des
eaux contaminées par les POP de diverses familles.
Mots clés : procédés électrochimiques, eaux usées
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
21
COMMUNICATIONS
ORALES
&
AFFICHEES
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
22
COMMUNICATIONS
ORALES Thèmes 1
Corrosion et Traitements de Surfaces
&
Electrochimie Analytique et
Moléculaire
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
23
ID101
COMBINING DFT AND QSAR COMPUTATION FOR THE ANALYSIS OF THE
ANTICORROSIVE MECHANISM OF NOVEL MOLECULES DERIVED FROM TRANS
ANETHOL IN THE ACID MEDUIM HCl 1M
A. BOUOIDINA1*, M. CHAOUCH
1, M. TALEB
2, A. LAHKIMI
2, A. CHETOUANI
3,
F. EL-HAJJAJI2
1 Laboratory of Materials and Environment Engineering, University sidi Mohamed Ben Abdellah, Department of
Chemistry, Fez, Morocco
2 Laboratory of Engineering, Electrochemistry, Modeling and Environment, University sidi Mohamed Ben
Abdellah, Department of Chemistry, Fez, Morocco
3 LCAE, Faculté des Sciences, Université Mohammed 1
er, Oujda
ABSTRACT
In this work, the inhibition ability of some molecules derived from trans anethol against the
corrosion of mild steel in 1.0 M HCl solution was studied at different temperatures in the range
from 298 to 328 K by a series of known techniques such as weight loss, polarization and
electrochemical impedance spectroscopy. It was found that the studied molecules exhibit a good
performance as inhibitors of corrosion
Thereafter, Corrosion Inhibition effect of these derivatives was studied using Quantitative
Structure-Activity Relationship (QSAR) and Quantum chemical calculations method. The best
descriptors which explain the inhibition effect of corrosion were selected. Base on this
descriptors we can predict the inhibition efficiency of these molecules. Quantum chemical
calculations using Density Functional Theory (DFT) with Becke three parameter- Lee -Yang and
Parr (B3LYP) /6-311G++ (d,p) was used to confirm the effect based on the molecular level using
quantum chemical descriptors and the results were found to be consistent with the predicted
result by QSAR model.
Keywords: Corrosion; inhibition; DFT; QSAR.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
24
ID102
ETUDE ETECTROCHIMIQUE DE NOUVEAUX DERIVES DE PYRAZOLE SUR LA
CORROSION D’ACIER INOXYDABLE DANS UN MILIEU H2SO4 2.0M
H. CHAHMOUTa; M. OUAKKI
a; S. SIBOUS
b; M. GALAI
c; Z. BENZAKRI
b; S. BOUKHRIS
b; A.
SOUIZIb; M. CHERKAOUI
a
a Laboratoire de Matériaux, d’Electrochimie et d’Environnement (LMEE).
b Laboratoire de chimie organique, organométallique et théorique,
c Laboratoire d'Ingénierie des Matériaux et d'Environnement: Modélisation et Application
(LIMEMA).
Département de Chimie, Faculté des Sciences, Université Ibn Tofail BP 133, Kénitra 14 000,
Maroc
*E-mail du correspondant : [email protected]
RESUME
Actuellement, les matériaux présentent une grande variété d'applications industrielles. Cependant,
ils peuvent être corrodés facilement dans des milieux agressifs. L’action anticorrosion d'un acier
inoxydable par deux composés organique à base de pyrazole dans un milieu H2SO4 2.0M a été
étudiée à l'aide de techniques électrochimiques (spectroscopie d'impédance (EIS), polarisation
potentiodynamique). Les courbes de polarisation indiquent que les deux composés agissent
comme des inhibiteurs de type mixtes retardant à la fois la réaction anodique et la réaction
cathodique. Un modèle de circuit équivalent électrique approprié a été utilisé pour calculer les
paramètres d'impédance. Ces composés ont été adsorbés sur la surface de l'acier ordinaire selon
l’isotherme d'adsorption de Langmuir. Certaines paramètres thermodynamiques du processus
d'activation et de la dissolution métallique ont été calculés et discutés.
Mots-clés : pyrazole, Inhibition, Acier, Adsorption.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
25
ID103
QUANTUM CHEMICAL AND EXPERIMENTAL EVALUATION OF THE
CORROSION INHIBITORY ACTION OF NOVEL IMIDAZOLE DERIVATIVES
AGAINST THE CORROSION OF MILD STEEL IN ACIDIC MEDIUM
M. OUAKKI1,*
, M. GALAI2, M. RBAA
3, B. LAKHRISSI
2, E. H. RIFI
4, M. CHERKAOUI
1
1Laboratory of materials, electrochemistry and environment (LMEE),
2Laboratory of Materials Engineering and Environment: Modelling and Application(LMEEMA),
3Laboratory Agro-Resources, Polymers and Process Engineering,
4Laboratory of organic synthesis and extraction processes (LOSEP),
Faculty of sciences, Ibn Tofail University, PB. 133-14000, Kenitra, Morocco
*correspondant auteur E-mail: [email protected]
Abstract
HCl pickling treatment is utilized to remove mill scales from mild steel (MS) surface at different
temperatures up to 328±2 K. In order to minimize the metal dissolution newly multifunctional
heterocycles based on imidazole namely 2-(4-chlorophenyl)-1,4,5-triphenyl-1H-imidazole (IM-
Cl) and 1,4,5-triphenyl-2-(p-tolyl)-1H-imidazole (IM-CH3) have been synthesized and
characterized. Theirs anticorrosion performance for MS/ 1 M HCl system has been determined by
electrochemical and theoretical investigations. IM-Cl and IM-CH3 act as excellent inhibitors for
MS in 1 M HCl. In addition, the surface of the MS has been analyzed by the UV-visible and
SEM-EDAX. The experimental results were correlated with theoretical studies.
Keywords: Corrosion inhibition, Imidazole, SEM-EDAX, UV-visible, DFT.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
26
ID103
ELECTROCHEMICAL AND THEORETICAL STUDY OF NEWLY QUINOLINE
DERIVATIVES AS CARBON STEEL IN PHOSPHORIC ACID MEDIA
N. DKHIRECHE1, M. GALAI
1, M. RBAA
2, M. OUAKKI
3, E. ECH-CHIHBI
4, B. LAKHRISSI
2, M.
EBN TOUHAMI1
1 Laboratory of Materials Engineering and Environment: Modeling and Application, Faculty of Science, University
Ibn Tofail BP. 133-14000, Kénitra, Morocco 2 Laboratoire d’Agroressources et Génie des Procédés, Faculté des Sciences, Université Ibn Tofaïl, BP 133, Kénitra
14000, Morocco 3 Laboratory of Materials, Electrochemistry and Environment, Faculty of Science, Ibn Tofaïl University, Kénitra,
Morocco. 4 Laboratory of Engineering, Electrochemistry, Modeling and Environment (LIEME), Faculty of Sciences,
UniversitySidi Mohamed Ben Abdellah, Fez, Morocco.
*Corresponding author: E-mail: [email protected]
ABSTRACT
The corrosion inhibition properties of two newly quinoline derivatives on carbon steel in
phosphoric acid (2.0 M H3PO4) solution have been examined and characterized by weight loss,
Tafel polarization and electrochemical impedance spectroscopy techniques. The experimental
results reveal that the two compounds have a good inhibiting effect on carbon steel in 2.0 M
H3PO4 solution.
The protection efficiency increases with rise of inhibitor concentration, but the temperature has
hardly an opposite role on the inhibition efficiency of quinoline derivatives. The adsorption of Q-
N(CH3)2 and Q-NO2 is found to obey the Langmuir adsorption isotherm. Thermodynamic data
clearly show that the adsorption mechanism of Q-N(CH3)2 and Q-NO2 on carbon steel surface in
2.0 M H3PO4 solution is mainly electrostatic-adsorption. Potentiodynamic polarization studies
exemplify that either Q-N(CH3)2 or Q-NO2 act as mixed type inhibitor.
The correlation between inhibition efficiency and molecular structure of the inhibitors is
conducted by the determination of chemical indexes, which were performed using density
functional theory (DFT) at 6-31G (d,p) levelof calculation.
Keywords: Corrosion inhibition, carbon steel, phosphoric acid, quinoline derivatives, theoretical
study.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
27
ID104
SURFACE-ENHANCED RAMAN SCATTERING FOR PRECISE ROVIBRATIONAL
INVESTIGATION OF POLYPYRROLE INNER LAYERS
A. EL GUERRAF1*
, S. BEN JADI2, Z. AOUZAL
1, M. BOUABDALLAOUI
1, M. BAZZAOUI
2,
E.A. BAZZAOUI1
1 Laboratoire de Chimie des Matériaux (LCM), Faculté des Sciences, Université Mohammed 1
er, 60 000 Oujda,
Morocco. [email protected]
2 Laboratoire Matériaux et Environnement (LME), Faculté des Sciences, Université Ibn Zohr, 80 000 Agadir,
Morocco
ABSTRACT
Since their discovery in the late 70s, conducting polymers (CPs) have opened new perspectives
for applications in many scientific and technological fields. Among them, polypyrrole (PPy) has
received particular attention because of its good stability, higher conductivity, and ease of
preparation. Prospective applications for PPy include batteries, sensors, electromagnetic
shielding, and functional membranes.
Among the analytical methods used for CPs characterization, SERS has proved its worth. Thanks
to the huge enhancement of the Raman intensity, this powerful and very sensitive technique
allows to gain not only selective insights about the polymer structure but also the geometry and
anchoring mode in the polymer/electrode interfacial zone.
Few metals, such as Ag and Au, can produce SERS-effect provided that their surface is
appropriately roughened.
In this context, we present SERS investigation of PPy/silver interface, prepared using a two-steps
electrochemical protocol. In the first step, the silver electrode is subjected to three oxidation-
reduction cycles (ORC) in 0.1 M KCl aqueous solution to give the surface the adequate
roughness. The second stage is to electrodeposit thin PPy film by the galvanostatic method in
dichloromethane with Tetrabutylammonium hexafluorophosphate as supporting electrolyte.
Keywords: Polypyrrole; Surface enhanced Raman scattering; silver electrode; electrosynthesized
films.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
28
ID106
CORROSION INHIBITION OF AL-ALLOY 7075 IN 3.5% NACL SOLUTION BY A
NATURAL INHIBITOR (PUMPKIN PEPO): AN ELECTROCHEMICAL AND
SURFACE STUDIES
M. RADI1, R. MELIAN
1, N. KHEMMOU
1, N. DKHIRECHE
1, M. GALAI
1, M. EBN TOUHAMI
1,*,
M. SFAIRA2
1 Laboratoire des Matériaux, Electrochimie et Environnement, Faculté des Sciences, Université Ibn Tofaïl, BP. 133 –
14000, Kénitra, Morocco.
2 Laboratoire d’Ingénierie des Matériaux, de Modélisation et d’Environnement, LIMME, Faculté des Sciences Dhar
El Mahraz, Université Sidi Mohamed Ben Abdellah, USMBA, BP 1796 – 30000, Atlas – Fès, Morocco.
*Corresponding author: E-mail: [email protected]
ABSTRACT
Aluminum alloys have received unprecedented attention due to their high strength / density ratio,
the wrought aluminum, zinc, magnesium and copper. AA7075 series alloys are used in many
areas such as transport applications, aviation industry, bicycle components…
The corrosion inhibition of 7075 aluminum alloy in 3.5 % NaCl solution by Pumpkin Pepo has
been studied using electrochemical impedance spectroscopy (EIS), potentiodynamic
polarization(PP) and scanning electron microscopy (SEM).Inhibition efficiency reaches 95% at
1g/L of Pumpkin Pepo. The adsorption of the inhibitor onto the 7075 aluminum alloy surface
obeyed the Langmuir adsorption isotherm. The adsorbed film on 7075 aluminum alloy surface
containing inhibitor is confirmed by the SEM. The obtained results showed that:(1)the Pumpkin
Pepo acted as a cathodic inhibitor, (2)η% values obtained from different methods employed were
in good agreement. These results demonstrate that the Pumppkin Pepo could serve as an effective
corrosion inhibitor of 7075 aluminum alloy in 3.5% NaCl solution.
Keywords: corrosion, inhibition, Al-alloy 7075, 3.5 % NaCl, Pumpkin Pepo, electrochemical
methods, Langmuir, EIS, SEM.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
29
ID108
STIPA TENACISSIMA L AND CANNABIS SATIVA L PLANT EXTRACTS AS GREEN
CORROSION INHIBITOR FOR CARBON STEEL IN 1 M HCL SOLUTION
S. SAIR 1*, K. NEHHALE
1, O. TANANE
1, Y. ABBOUD
1, A. EL BOUARI
1
1 Laboratory of Physical Chemistry of Applied Materials, Faculty of Sciences Ben M’Sik, University Hassan II of
Casablanca, Morocco
ABSTRACT
The use of inhibitors is one of the most practical and economical methods to reduce the corrosive
attack on metal materials. This process mainly managed by the modification of one of the
elementary reactions (transport of species in solution, adsorption of the species on the surface of
the solid phases and charge transfer electronic). Herein, the action of two natural extract obtained
from Stipa Tenacissima L and Cannabis sativa L, on the electrochemical properties of carbon
steel immersed in 1M HCl solution was investigated. For this purpose, potentiodynamic
polarization and electrochemical impedance spectroscopy (EIS) were used. However results
revealed an increase in the corrosion inhibition efficiency when extracts concentrations increase
at the medium, she has exceeded 95% and 93% in the presence of 25% (V/V) of Stipa
Tenacissima L and Cannabis sativa L extract respectively. Furthermore, the influence of
temperature has been studied over a range of 293-333 ° K. Attenuated total reflectance Fourier
transforms infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, and X-ray
photoelectron spectroscopy have been used to identify the adsorbed layers and its components on
the steel surfaces. The study showed that inhibitors adsorption follows the Langmuir isotherm.
Keywords: Stipa Tenacissima L; Cannabis sativa L; Carbon steel; 1M HCl; Corrosion inhibition
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
30
ID109
SOME MALONATE DERIVATIVES AS CORROSION INHIBITORS FOR MILD
STEEL IN 1.0 M HCL: WEIGHT LOSS AND ELECTROCHEMICAL.
O. MOUADILI1*, A. AOUNITI
1, M. KADDOURI
1, M. ELMESKINI
2, M. DAOUDI
2, A.RADI,
B. HAMMOUTI1
1Laboratory of Analytical Applied Chemistry Materials and Environment LC2AME-, Faculty of Science, First
Mohammed University, PO Box 717, 60 000 Oujda, Morocco.
2Laboratory of Organic Chemistry, Faculty of Science,Dhar El Mahraz Sidi Mohammed Ben Abdellah
University,Fes,Morocco.
ABSTRACT
The inhibition of mild steel corrosion in (1.0 M) HCl by some malonate derivatives namely: 2-
(Phenyl-Pyrazol-1-yl-Méthyl)-Malonate d’Ethyle (Im1), 2-(4-Chlorophényl)-Pyrazol-1-yl-
Méthyl]-Malonate d’Ethyle (im2), has been investigated using weight loss and electrochemical
studies. The results showed that (Im2) is the best corrosion inhibitor than (im1) with a high
efficiency reach until 94% at 10⁻ 3 mol/L, it observed that the inhibition efficiency increases with
an increase in the concentration and decrease with an increase in temperature for all the
inhibitors. The adsorption of inhibitor molecules on mild steel surface was found to be
spontaneous and obeyed the Langmuir adsorption isotherm. Potentiodynamic polarization
investigations indicated that the studied inhibitors were mixed-type inhibitors. Electrochemical
Impedance Spectroscopic measurements showed that the inhibitors form an adsorptive layer on
the metallic surface.
Image: The inhibitors Im1and Im2
OO
OO
CH3 CH3
NN
OO
OO
CH3 CH3
NN
Cl
Im1 Im2
Keywords: Corrosion, Mild steel, weight loss, organic inhibitors, Langmuir isotherm
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
31
ID110
ÉTUDE ELECTROCHIMIQUE DE L’INHIBITION DE LA CORROSION EN MILIEU
ACIDE PAR LES COMPOSES DE COORDINATION
A. RADI1, B. EL MAHI
1, A. AOUNITI
1, M. KADDOURI
1, B. HAMMOUTI
1, M. ELMASSOUDI
2,
S. RADI2
1Laboratoire de Chimie Analytique Appliquée, Matériaux et Environment-LC2AME FSO
2Laboratoire de Chimie Appliquée et Environnement – LCAE FSO
ABSTRACT
L'étude de la corrosion a débuté aux environs du 17éme siècle, mais ce n'est qu'au cours du
19éme siècle que l'on a étudié scientifiquement les moyens de lutter contre ce problème. La
protection par ajout d’inhibiteurs organiques contient des hétéros atomes tels que l’oxygène,
l’azote, ou des cycles aromatiques. Au cours de ce travail nous nous sommes intéressés plus
spécialement à la protection contre la corrosion par des inhibiteurs organiques synthétisés : les
alcools pyrazoliques, ainsi que la détermination thermodynamique du processus de corrosion (Ea,
ΔHa, ΔSa).
Pour fiabiliser les résultats, deux méthodes expérimentales seront employées à savoir:
Les mesures gravimétriques et les mesures électrochimiques stationnaires. Les résultats obtenus
ici montrent une efficacité élevée pour le composé L1 par rapport à L3. Ceci est dû à la chélation
favorable à cinq chaînons formés par l'azote pyrazolique et le métal (le fer). Les résultats
gravimétriques montrent que ce composé étudié est un inhibiteur efficace de la corrosion. Les
résultats électrochimiques révèlent que l’action inhibitrice de ces molécules se fait principalement
sur les sites cathodiques. Les courbes de polarisation cathodique se présentent sous forme de
droites de Tafel indiquant que la réaction d'évolution de l'hydrogène se fait selon un mécanisme
d'activation pur. L’action inhibitrice de ces molécules est due à leurs adsorptions sur la surface de
l’acier et obéit à celle de l’isotherme de Langmuir
Keywords: Corrosion, inhibiteurs, bipyrazol, complexe de coordination, isotherme d’adsorption
de Langmuir
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
32
ID112
CHRONOAMPEROMETRIC DETERMINATION OF AMOXICILLIN AT CARBON
PASTE ELECTRODE USING CHELATE EFFECT OF COPPER (II) IONS:
APPLICATION IN HUMAN BLOOD AND PHARMACEUTICAL TABLETS
A. HRIOUAa, A. FARAHI
b, S. LAHRICH
A, S. SAQRANE
a, M. BAKASSE
c,
M.A. EL MHAMMEDIa
aUniv Sultan Moulay Slimane, Laboratoire de Chimie et Modélisation Mathématique (LCMM), Faculté
Polydisciplinaire, 25 000 Khouribga, Morocco.
bUniv. Ibn Zohr, Faculté de Sciences, BP 8106 Cité Dakhla, Agadir, Morocco.
cUniv. Chouaib Doukkali, Equipe d’Analyse des Micropolluants Organiques, Faculté de Sciences, Morocco.
E-mail : [email protected]
ABSTRACT
Accumulation of extensive amounts of pharmaceuticals, and in particular antibiotics, used in
human therapies and veterinary medicines in the environment has caused a great concern due to
their adverse impact especially the potential induction of antibiotic resistance. Amoxicillin
(AMX) is one of the widely used human and veterinary medicine of environmental concern.
However due to its wide application, it remains in biological fluids and hence it causes some
side-effects on human such as nausea, vomiting, and rashes. Thus, it is important to detect its
residue in biological fluids.
AMX is a semi-synthetic penicillin with a beta-lactam ring. It is known to be susceptible to
catalyzed hydrolysis by metal ions, after rapid complexation with metal ions such as copper ions
Cu (II). Taking into consideration that Cu (II) can also participate in redox reaction, a new
electrochemical method was investigated for the indirect determination of amoxicillin (AMX) at
carbon paste electrode. The interaction between the β-lactam antibiotic and copper ions was
studied by square wave voltammetry (SWV) and spectrophotometry UV-Visible. The calibration
curves for AMX have been constructed using chronoamperometry exhibited a linear response in
the concentration range of 1.95 × 10-7
- 1.46 × 10-5
mol L-1
. The limit of detection was 8.84 × 10-
8 mol L
-1. The applicability of the proposed method was tested in human blood and
pharmaceutical tablets.
Keyswords: Amoxicillin, copper (II), chronoamperometry, humain bloods, pharmaceutical
preparations.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
33
ID115
PROTECTION OF MILD STEEL USING BIPYRAZOLE DERIVATIVES AS
CORROSION INHIBITEUR IN HCl 1 M
E. RAHOU 1*
, M. BOUKLAH 1, A. BOUYANZER
1, A. TITI
2, R. TOUZANI
2.
1LC2AME, Faculty of Sciences, University Mohammed Premier, B.P. 4808, 60046 Oujda, Morocco
2LCAE, Faculty of Sciences, University Mohammed Premier, B.P. 4808, 60046 Oujda, Morocco*
ABSTRACT
The mild steel is one of the most common material used in people daily and industry activities
such as building, manufacturing of wide range of materials used in petrochemical, reaction
vessels and for storage purpose. However, during the cleaning processes of mild steel from rust
using mineral acids known as pickling prefer a metallic dissolution which lead to remarkable
damages. As solution, many studies were performed using organic compounds inhibitors to
protect mild steel from corrosion effect. Many researchers used heterocyclic compounds contain
nitrogen such as bipyrazole derivatives as corrosion inhibitors due to their high efficiency to
protect mild steel from corrosion. In our work the inhibitor efficiency of bipyrazole derivatives
(L11) was evaluated using gravimetric method. The corrosion efficiency at optimum
concentration 10-3
show a great value which reached to 91% at 308 K in 6h. The temperature
effect indicate that the inhibitor efficiency decreases with the increasing of the temperature. The
adsorption of L11 on the mild steel surface obeyed to Langmuir isotherm.
Keywords: mild steel, bipyrazole derivatives, corrosion, adsorption, Langmuir isotherm,
gravimetric
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
34
ID116
ÉTUDE THEORIQUE DE LA REGIOSELECTIVITE DE LA SUBSTITUTION
NUCLEOPHILE DE L’Α-AZIDO GLYCINATE DU METHYLE N-BENZOYLE PAR
LE 3-AMINO-1,2,3-TRIAZOLE
D. ZAHRI1, E.H. MABROUK
1,2, N. ARROUSSE
1, M. TALEB
1
1Laboratoire d’ingénierie d’électrochimie, de modélisation et d’environnement, Faculté des Sciences Dhar El
Mahrez, Université Sidi Mohamed Ben Abdellah, B.P1796-Fès Atlas, Maroc.
2Laboratoire de chimie organique, Faculté des Sciences Dhar El Mahrez, Université Sidi Mohamed Ben Abdellah,
B.P1796-Fès Atlas-Fès, Maroc.
RESUME
L’objectif de cette étude est d’expliquer théoriquement le résultat expérimentale du produit
obtenu inattendu lors de la réaction de la substitution nucléophile du groupement azoture N3 en
position α de la fonction ester de l’α-azido glycinate du méthyle N-benzoylé par le 3-amino-
1,2,3-triazole qui présente deux sites nucléophile (amine primaire et une amine secondaire) [1].
En effet, nous avons adopté la méthode DFT/B3LYP implémenté dans le programme
GAUSSIAN09, avec la base 6-31G(d,p) [2], en prenant en considération l’effet du solvant
(acétone) sans contrainte de symétrie. Après l’analyse des résultats du calcul d’optimisation des
deux produits 2 et 3, nous constatons que l’optimisation de la molécule 3 conduit à la formation
d’un cycle à 3 chaînes (aziridine) qui s’ouvre facilement (instable) et non pas le triazole.
L’analyse des valeurs des indices de Fikui [3], montre que le pouvoir nucléophile du site N5 est
plus grande que le site N6 (fN5- > fN6
-), ce qui explique bien le résultat obtenu expérimentalement.
Mots cles : regioselectivite, substitution nucleophile, α-azido glycinate, methyle n-benzoyle, 3-
amino-1,2,3-triazole
[1] El Houssine Mabrouk, Elachqar Abdelrhani, El Hallaoui Abdelilah, Alami Anouar, El Hajji Soumia,
Martinez Jean, Rolland Vallery, Arabian Journal of Chemistry (2013) 6, 93–96.
[2] I.B. Obot, D. D. Macdonald, and Z. M. Gasem, “Density Functional Theory ( DFT ) as a Powerful
Tool for Designing,” Corros. Sci., 2015.
[3] K. Fukui, T. Yonezawa, and H. Shingu, “A Molecular Orbital Theory of Reactivity in Aromatic
Hydrocarbons,” vol. 722, 1952.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
35
ID117
THEORETICAL AND EXPERIMENTAL STUDIES ON THE CORROSION
INHIBITION PERFORMANCE OF TRIAZOLE DERIVATIVE ON MILD STEEL IN
ACIDIC MEDIUM
I. MERIMI1*, R. BENKADDOUR
2, H. OUDDA
1, B. HAMMOUTI
2
1Laboratory separation processes, Faculty of Science, University IbnTofail PO Box 242,Kenitra, Morocco.
2LCAE-URAC 18, Faculty of Science, University First Mohammed, PO, Box 717, 60 000 Oujda, Morocco
*Corresponding author: E-mail: [email protected]
ABSTRACT
The mild steel anti-corrosion potential by synthesized (Z)-4-((4-methoxybenzylidene) amino)-5-
methyl-2,4-dihydro-3H-1,2,4-triazole-3-thione (2C) in 1.0 M hydrochloric acid was studied by
gravimetric and electrochemical techniques. Adsorption of the inhibitor followed Langmuir
isotherm. Electrochemical measurements showed that addition of the inhibitor simultaneously
decreased corrosion current density and double layer capacitance but increased charge transfer
resistance. Potentiodynamic polarization studies revealed that triazole derivative effectively
suppressed both the anodic and cathodic processes of mild steel corrosion in acid solution and
hence acted as mixed-type inhibitor. On the basis of thermodynamic adsorption parameters,
mixed-type adsorption for the studied inhibitor on MS surface was suggested. The adsorption of
the inhibitor was investigated by performing quantum chemical calculations and molecular
dynamic simulation. Theoretical results further supported the experimental findings.
Keywords: Corrosion inhibition, Mild Steel, Triazole derivative, weight loss, hydrochloric acid,
Electrochemical methods , quantum chemical calculations, Molecular dynamic simulation.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
36
ID118
COMPARATIVE STUDY OF THE CORROSION INHIBITION EFFICIENCY OFSOME
TRIAZOLE DERIVATIVESOF DUCTILE IRON IN SOLUTION SIMULATING SOIL
A. BENIKDES 1, O. BENALI
2, A. TIDJANI
3, M. TOURABI
4, H. OUICI
5, F. BENTISS
4
1Department of civil engineering and hydraulic, Faculty of Technology, University of Saïda- Algeria.
2 Department of Biology, Faculty of Sciences, University of Saïda- Algeria.
3 Department of Hydraulics, USTO MB, BP 1505, El Mnaouer, El Mnaouer, Oran 31000 - Algeria.
4Laboratoire of Catalysis and Materials Corrosion (LCCM), Faculty of Science, University ChouaibDoukkali, El
Jadida, Morocco.
5Department of Chemistry, Faculty of Sciences, University of Saïda, Algeria.
ABSTRACT
The inhibition of the corrosion of ductile iron by 5 - amino-1,3,4-thiadiazole-2-thiol (5 -
ATT)and 5 - amino-4H-1,2,4-thiadiazole-3-thiol (5 - AHTT) in solution simulating soil has been
investigated using electrochemical and spectroscopic studies. The inhibition efficiency increased
withincrease in inhibitor concentration for the two compounds. Inhibition efficiencies up to 71%
for 5 - ATT and65% for 5 - AHTT can be obtained. Adsorption of these inhibitors on the ductile
iron surface is found to obey the modified Langmuir adsorptionisotherm. The effect of
temperature and immersion time on the corrosion behavior with addition of 10-3
M of 5 - ATT
and 5 - AHTTadded was studiedand the results were discussed. The comparativestudy of triazole
derivatives indicates that the corrosion inhibition efficiency of the 5 - ATT is greater than that of
the 5 - AHTT.
Keywords: ductile iron, solution simulating soil, polarization, inhibition, corrosion
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
37
ID121
ELECTROCHEMICAL INVESTIGATION OF CATALYTIC EFFECT OF CLAY IN
OXIDIZING IBUPROFEN
H. EL OUAFYa*, H. HAMMANI
a, S. LAHRICH
A, M. BAKASSE
b, A. FARAHI
a,c,
M.A. EL MHAMMEDIa
a Univ. Sultan Moulay Slimane, Laboratoire de Chimie et Modélisation Mathématique (LCMM), Faculté
Polydisciplinaire, BP 145, 25 000 Khouribga, Morocco.
b Univ. Chouaib Doukkali, Equipe d’Analyse des Micropolluants Organiques, Faculté de Sciences, Morocco.
c Univ. Ibn Zohr, Equipe de Catalyse et Environnement, Faculté de Sciences, BP 8106 Cité Dakhla, Agadir,
Morocco.
* E-mail: [email protected]
ABSTRACT
The oxidation of ibuprofen represents a serious problem, which arises from the high over-
potential in the direct oxidation at most unmodified electrode surfaces. In this respect, many
researchers have attempted to diminish the over potentials by using different modified electrodes
including boron-doped diamond electrode, palladium nanoparticles and clay. However, clay is an
interesting modified electrode due to its high surface area, non-toxicity and high adsorption
tendency to make it a good adsorbent, especially for organic pollutants.
The present work reports on electrocatalytic activity of clay modified carbon paste electrode
(Clay-CPE) for ibuprofen oxidation. The voltammetric behavior of ibuprofen is explored where a
sensitive anodic peak has appeared at about 1.19 V (vs. Ag/AgCl/3M KCl) in phosphate buffer
solution (pH 8.0). This peak results from the irreversible oxidation of ibuprofen at Clay-CPE.
The transfer coefficient α, the apparent electron transfer rate constant ks and the electro-catalytic
activity K for oxidation of ibuprofen at the surface of the Clay-CPE were determined using
electrochemical approaches. In order to provide electrochemical detection of ibuprofen, the
differential pulse voltammograms were used in the potential range between 0.3 V and -1.4 V vs.
Ag/AgCl/(sat. KCl). Furthermore, the proposed sensor showed a wide linear concentration range
from 1 to 1000 μM with good selectivity, stability and repeatability. The proposed method was
subsequently used for the determination of ibuprofen in real samples.
Keywords: Ibuprofen, electrocatalytic oxidation, clay, carbon paste electrode.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
38
ID122
ETUDE DU COMPORTEMENT ELECTROCHIMIQUE DU CUIVRE DANS UNE
SOLUTION D’ETHYLENEDIAMINE
A. EL MANSOURI1*
, R. DRISSI DAOUDI1, H. MOKHLIS
1. M. AZZI
1
1Laboratoire Interface Matériaux, Environnement,Faculté des Sciences, Université Hassan II de Casablanca,B.P
5366 Maârif, Casabanca, Maroc.
* Corresponding author: [email protected]
RÉSUMÉ
Dans le cadre de nos travaux de recherche sur le comportement du cuivre dans différents milieux
complexants en vue de sa récupération à partir des déchets d’équipement électriques et
électroniques (DEEE), nous avons travaillé en solution d’éthylènediamine. Nous avons choisi
l’éthylénediamine car ce complexant présente plusieurs avantages. Nous avons alors procédé à
l’étude électrochimique par voltampérométrie cyclique (VC). Pour cela nous avons travaillé en
deux étapes, dans une solution synthétique puis dans un lixiviat.
Pour mieux comprendre le comportement électrochimique des ions Cu(II) dans la solution
synthétique d’éthylènediamine, l’influence de la vitesse de balayage en potentiel, de la
concentration des ions cuivriques en solution et de la vitesse de rotation de l’électrode tournante
de travail ont été aussi étudiés.
Dans un second temps, nous avons utilisé une solution de lixiviat. Pour obtenir ce lixiviat, nous
avons procédé au broyage de déchets de cartes circuits imprimés (CCI) afin de les réduire en
poudre avant de les attaquer par la solution d’éthylènediamine. Nous avons alors étudié le
comportement par VC de la solution obtenue.
Mots-clés : Cuivre, Voltammpérométrie cyclique, Ethylènediamine, Déchets d’équipement
électriques et électroniques, Cartes circuits imprimés.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
39
ID123
LONG LASTING ANTICORROSIVE PERFORMANCE OF LANTHANUM IONS
INTERCALATED STEVENSITE ON BRASS IN 3% NACL MEDIUM
N. BEN SEDDIK1*, I. RAISSOUNI
1, K. DRAOUI
1, A. AÏT AGHZZAF
2, A. CHRAKA
1, B.
AZNAG3, F. CHAOUKET
1, D. BOUCHTA
1
1Laboratoire des Matériaux et Systèmes Interfaciaux. Equipe ERESI. Faculté des Sciences de Tétouan, Université
Abdelalek Essaadi
2Laboratoire des Sciences Appliquées et Didactique (LASAD). Ecole Normale Supérieure, Université Abdelalek
Essaadi
3Centre de recherche REMINEX-Groupe MANAGEM Site de hajar, BP 469 Marrakech, Maroc.
*E-mail: [email protected]
ABSTRACT
The La3+
-ST, Stevensite clay fraction exchanged with lanthanum ions was evaluated as a
corrosion inhibitor for brass in a 3% NaCl medium. The inhibition efficiency is compared to the
homoionic Stevensite Na+-ST and to the commercial product lanthanum chloride (LaCl3, 7H2O).
XRD and ICP-OES technics were used to confirm the basal space saturation of Na+-ST and La
3+-
ST Stevensite by Na+ and La
3+ ions, respectively. Polarization and electrochemical impedance
spectroscopy measurements were used to evaluate corrosion inhibition. Brass samples after the
electrochemical test were analyzed by SEM coupled to an EDS analysis.
An optimal concentration of La3+
-ST showed a better inhibition compared to the other inhibitors
after 1h immersion. The inhibitory performance of the La3+
-ST was improved after 240 hours of
immersion due to the intelligent release of lanthanum ions in the medium. The lanthanum ions
precipitate as lanthanum hydroxide and form a protective layer at the surface.
Keywords: Stevensite; Lanthanum ions; ICP-OES; Corrosion.
0 2000 4000 6000 8000 10000 12000 14000 16000
0
2000
4000
6000
8000
10000
12000
14000
16000
-Z
i (ko
hm,c
m2 )
Zr (kohm,cm2)
Blank
1,5g/l_Na-ST
10ppm_La
1,5g/l_La-ST
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
40
ID126
ETUDE DE LA CORROSION PAR LE SOL DES CONDUITES D’ADDUCTION D’EAU
POTABLE EN BETON PRECONTRAINT DANS LES VILLESER-RACHIDIA-ERFOUD
S. HASSI1, A. EJBOUH
1, A. CHABAB
.., M. EBNTOUHAMI
1, A.BOUJAD
2, K. BERRAMI
3,
1 Laboratory of Materials Engineering and Environment: Modelling and Application, Faculty of Science, University
IbnTofail BP. 133-14000, Kenitra, Morocco
2 Public Laboratory of Tests and Studies (LPEE), Experimental Center for Materials and Industrial Engineering
(CEMGI), Tit Mellil BP 61 CASABLANCA,Maroc
3 International Institute for Water and Sanitation (IEA), National office of Electricity and the Potable Water,
Morocco
RESUME
Le présent travail concernel’étude de la dégradation des conduites d’adduction de l’eau potable
enbéton précontraintdansles villes d’Er-Rachidia-Erfoud à partir du barrage Hassan Addakhil.
Dans cette zone-aride marocaine,les défaillances (casses, fissures, corrosion, etc.) ont été parfois
observées avant même la mise en service des projets. Ces phénomènes non encore expliqués
mettent en jeu la durée de vie des conduites et la sécurité de l’approvisionnement en potable.
Tout d’abord, un diagnostic a été réalisé pour déterminer les origines et les mécanismes de ces
dégradations aussi bien des bétons (carbonatation, attaques chimiques épaisseur d’enrobage,
porosité) que des armatures (corrosion, attaques chimique…) des conduites en béton précontraint
considérées dans leurs environnements et en tenant compte également de l’environnement et du
milieu de pose.
Les résultats obtenus montrent que la corrosion observée sur les conduites endommagées
provient principalement d’une pollution en chlorures du milieu environnant (l’agressivité du
solqui amorce la corrosion des cerces de frettage)Ce taux élevé de chlorures observé induit en
présence des nappes phréatique saline, du climat et de la faible épaisseur d’enrobage, les
armatures se corrodent facilement et les conduites se dégradent rapidement.
Mots cles : corrosion, conduites d’eau potable, beton, sol, villeser-rachidia-erfoud
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
41
ID129
ELECTROCHEMICAL EVALUATION OF NEW IMIDAZOPYRIDINE DERIVATIVES
AS CORROSION INHIBITORS FOR CARBON STEEL IN HYDROCHLORIC ACID
MOLAR
R. SALIM1, 2*
, E. ECH-CHIHBI 1, 2
, H. OUDDA1, A. CHETOUANI
3, F. EL-HAJJAJI
2, M. TALEB
2
1 1 Laboratory of separation processes (LSP), Faculty of Science, University Ibn Tofail, Kénitra, Morocco
2 2 Laboratory of Engineering, Electrochemistry, Modeling and Environment (LIEME), Faculty of Sciences,
University Sidi Mohamed Ben Abdellah, Fez, Morocco
3 LCAE, Faculté des Sciences, Université Mohammed 1
er, Oujda
* Corresponding author: [email protected]
ABSTRACT
Carbon steel has been extensively used in several industrial processes due to its distinctive
characteristics. However, they can unavoidably be corroded due to the harsh environment around
them. Recently, using organic corrosion inhibitors is the most effective and economical approach
of all anticorrosive methods. The corrosion inhibition performances of two Imidazopyridine
derivatives for carbon steel in 1M HCl solution were studied by potentiodynamic polarization
and electrochemical impedance spectroscopy (EIS) techniques. Data obtained from EIS studies
were analyzed to model inhibition process through appropriate equivalent circuit model. The
results of the electrochemical methods showed that the studied molecules imparted high
resistance and behaved as mixed type inhibitors. Both thermodynamic and kinetic parameters
were calculated and discussed. The adsorptions of these inhibitors molecules on carbon steel
surface were found to be chemisorption.
Keywords: Inhibitor, Imidazopyridine, Adsorption, EIS, potentiodynamic polarization.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
42
ID130
CONTRIBUTION TO THE STUDY OF THE INHIBITORY PROPERTIES OF A
QUINOXALINE DERIVATIVE AGAINST CORROSION OF MILD STEEL IN 1 M HCL
N. ACHNINE, M. KADIRI, M. DRIOUCH, M. SFAIRA
Laboratoire d’Ingénierie des Matériaux, de Modélisationet d’Environnement (LIMME), Faculté des Sciences Dhar
El Mahraz, Université Sidi Mohamed Ben Abdellah, USMBA, B.P.1796, 30000 Atlas – Fès, Morocco
Corresponding author: [email protected]
ABSTRACT
Anew quinoxaline derivative namely 1-méthyl-4-phényl [1,2,4] triazolo[4,3-
a]designatedMPTQwas synthesized and its inhibitive action against corrosion of mild steel in 1
M HCl solution was investigated at 308 K, by means of electrochemical impedance spectroscopy
(EIS),potentiodynamic polarization (PP), and mass-loss (ML) measurements. The results
obtained from the three methods were in good concordance with each other. From ML
measurement,the inhibiting efficiency reached94% at 10-3
M. PP study revealed that MPTQ acted
as a mixed type inhibitor.In addition, the impedance spectra obtained in the presence of MPTQ
were characterized by only one time constant. The results derived from the fitting of the
experimental data by using the modified Randles circuit showedan improvement in the inhibition
efficacy with rise of MPTQ concentration.The isotherms of Langmuir, Flory-Huggins, Temkin,
Frumkin,Freundlich and the kinetic-thermodynamic model of El-Awadywere used to study the
adsorption properties of MPTQ on the surface of steel. The exploration of these models has
shown the existence of intermolecular interactions of the MPTQ inhibitor, as well as the
heterogeneity of the surface and exactly threemoleculesof water are replaced by a single MPTQ
molecule.
Keywords: Quinoxaline derivative, Acid inhibition, Isotherms of adsorption
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
43
ID130
CONFORTATION DE TROIS METHODES POUR L’ETUDE DU COMPORTEMENT
INHIBITEUR A LA CORROSION DU MERCAPTOBENZIMEDAZOL SUR SUBSTRAT
D'ACIER DOUX DANS UNE SOLUTION D’ACIDE CHLORHYDRIQUE 1 M A 298 K
N. ACHNINE1, M. DRIOUCH
1, EL. ELASSIRI
1, M. SFAIRA
1, M. BENZAKOUR
1,
M. EBN TOUHAMI2
1 Laboratoire d’Ingénierie des Matériaux, de Modélisation et d’Environnement (LIMME), Faculté des Sciences,
Université Sidi Mohammed Ben Abdellah, USMBA, B.P. 1796–30000, Atlas – Fès, Morocco.
2Laboratoire d’Ingénierie des Matériaux et Environnement : Modélisation et Application (LIMEMA), Faculté des
Sciences, Université Ibn Tofaïl, B.P. 133–14000, Kénitra, Morocco.
Email : [email protected]
RESUME
L’étude de l’efficacité inhibitrice du dérivé de mercaptobenzimidazole sur l’inhibition de la
corrosion d’un acier doux dans une solution d’acide chlorhydrique 1 M à 298 K, a été menée par
couplage de trois méthodes ; gravimétrique (PM), spectroscopie d’impédance électrochimique
(EIS) et polarisation potentiodynamique (PP). Les résultats révèlent une assez bonne concordance
entre les trois méthodes. L’étude gravimétrique a montré que la vitesse de corrosion diminue
tandis que l’efficacité croit avec la concentration en inhibiteur et atteint une valeur maximale de
93%. Les courbes PP ont révélé que l’addition de l’inhibiteur entraine une diminution des
densités des courants cathodiques et anodiques avec déplacement du potentiel de corrosion vers
des valeurs anodiques et cathodique, ce qui met en évidence le caractère mixte de l’inhibiteur
étudié. L’interface électrochimique a été modélisée avec le circuit électrique à une seule
constante de temps (RS + Qdc / Rtc) en utilisant CPE qu’est caractérisé par deux paramètres : Q le
coefficient et ᾳ qui traduit le degré de la déviation par rapport à un système idéal. Comme
perspective une corrélation entre la structure moléculaire de l’inhibiteur et l’activité anticorrosion
peut être envisagée par le biais d’un calcul quantique.
Mots clés : Mercapto-benzimidazol, CEE, Paramètres thermodynamiques et cinétiques
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
44
ID131
UNDERSTANDING THE ADSORPTION OF BENZIMIDAZOLE DERIVATIVE AS
CORROSION INHIBITORS FOR MILD STEEL IN MOLAR HYDROCHLORIC ACID
E. ECH-CHIHBI 1,2
*, R. SALIM1,2
, H. OUDDA1, A. CHETOUANI
3, F. EL HAJJAJI
2, M. TALEB
2
1 Laboratory of Separation Processes, Department of Chemistry, Faculty of Science: University Ibn Tofail, Kenitra,
Morocco
2 Laboratory of Engineering, Electrochemistry, Modeling and Environment (LIEME), Department of Chemistry,
Faculty of Science: University Sidi Mohamed Ben Abdellah, Fez, Morocco
3 LCAE, Faculté des Sciences, Université Mohammed 1
er, Oujda
ABSTRACT:
Mild steel remains popular for a wide variety of uses in diverse aggressive applications.
However, they can be corroded in aggressive media. The adsorption mechanism and inhibition
performance of two benzimidazole derivatives were investigated as corrosion inhibitors for mild
steel in 1.0M HCl using electrochemical impedance spectroscopy and potentiodynamic
polarization.
The results indicated that inhibition efficiencies were enhanced with an increase in concentration
of inhibitor and decreased with a rise in temperature. The polarization curves indicated that
compounds tested acted as mixed-type inhibitors. Data obtained from EIS studies are analyzed to
model inhibition process through appropriate equivalent circuit models. The effect of
temperature and analyzing the thermodynamic parameters revealed that the mode
of adsorption has a chemical and physical nature and obeys the Langmuir isotherm. Scanning
electron microscopy (SEM) was used to characterize the nature of the metal surface.
Keywords: benzimidazole; corrosion inhibition; mild steel; EIS; SEM.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
45
ID132
NOVEL INORGANIC, LAYERED ALUMINIUM TRI-POLYPHOSPHATE
INTERCALATED WITH AMINE CONTAINIG INHIBITHORS FOR ANTI-
CORROSION APPLICATION
C. HEJJAJ1,2
, A. AIT AGHEZZAF3, M. DAHBI
1, R. HAKKOU
1,2, J. ALAMI
1 and C.B. FISCHER
1,4
1 Materials Science and Nano-engineering Department, University Mohammed VI Polytechnic, Benguerir, Morocco.
2 LCME, Faculty of Science and Technology - Cadi Ayyad University, Marrakesh, Morocco.
3 LASAD, Ecole Normale Supérieur-Abdelmalek EssaadiUniversity, Martil, Morocco.
4 Department of Physics, University Koblenz- Landau, Koblenz, Germany.
Email*: [email protected]
ABSTACT
Currently, organic coatings serve as a key method of metal protection against corrosion. In recent
years numerous attempts have been made to improve the corrosion protection of coatings with
different types of pigments, i.e. nano materials, metal oxides and layered materials. These
pigments can easily dissolve in water followed by precipitation of a passive oxide film on the
metal surface.
In this context, aluminum dihydrogen tri-polyphosphate (ATP) is one of several inorganic
phosphate ion exchangers with a typical layered structure that can be used advantageously for
intercalation. The material itself has been widely used in the coating industry as anti-corrosion
pigment due to its low solubility in water.
In order to improve the solubility and corrosion inhibition efficiency of ATP, several physical
and chemical modifications were carried out. In the present work, ATPwas modified with various
organic molecules (i.e. amines, amino acids) via an intercalation process to obtain novel anti-
corrosion pigments with enhanced inhibition efficiency. Structural characterization, morphology
etc. of the resulting system was performed by X-ray diffraction, thermal gravimetric analysis
(TGA) and SEM.
First results for the modified polyphosphate materials coated on low-carbon steel as a
combination of alkyd resin revealed improved anticorrosive properties using electrochemical
impedance spectroscopy (EIS) and potentiodynamic polarization (PP) in a 3 mass % NaCl
solution.
Kayworks : novel inorganic, aluminium tri-polyphosphate, anti-corrosion
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
46
ID140
ELECTROCHEMICAL, THERMODYNAMIC STUDIES OF SOME VITREOUS PHASE
COMPOUNDS AS ACID CORROSION INHIBITORS FOR MILD STEEL
G. GHENIMI*, M. OUAKKI, H. BAREBITA, T. GUEDIRA, M. CHERKAOUI
Laboratory of materials, electrochemistry and environment, Faculty of Science, Ibn Tofail University, PB. 133-
14050 Kenitra, Morocco.
*correspondant auteur: [email protected]
ABSTRACT
The inhibitive performance of two vitreous phase namely, 1BBP and 2BBP on the corrosion of
steel in hydrochloric acid 1.0 M, has been studied by weight-loss measurement, polarization
method and electrochemical impedance spectroscopy (EIS). The value of inhibition efficiency
increases as inhibitor concentration becomes decreases. The Polarization results indicated that
these compounds act as mixed type inhibitors in HCl solution. 1BBP and 2BBP showed the best
protection performances for mild steel in the studied medium. Thermodynamic parameters were
calculated and analyzed. Surface morphology of the mild steel was characterized by Scanning
Electron Microscopy (SEM) coupled with EDX.
Keywords: vitreous phase, inhibition, corrosion, HCl, EIS, SEM
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
47
ID142
EFFECT OF PH ON THE ELECTRODEPOSITION OF A ZINC DEPOSIT:
ELECTROCHEMICAL AND CORROSION RESISTANCE STUDY
A. EL FAZAZI1*
, M. OUAKKI1, M. CHERKAOUI
1
1 Laboratory of Materials Engineering and Environment (LMEE), Faculty of Sciences, University Ibn Tofail, BP 133,
14 000 Kenitra, Morocco
*Corresponding author: Email: [email protected]
ABSTRACT
The application of sacrificial coatings onto steel and other ferrous substances has long been
established as an effective and reliable standard of the industry for corrosion protection. Zinc has
found widespread use as the basis of a whole range of sacrificial coatings for ferrous substrates. It
is the most commonly used sacrificial coating and can be applied by a variety of techniques,
including hot-dipping, metal spraying, cementation, cladding and electrodeposition. In this study,
an investigation was done on the influence of pH on the electrodepositionbehavior of a Zn
deposit. During the investigation,the usage of cyclic voltammetry and galvanostatictechniques for
electrodeposition were utilized,while linear polarization resistance and electrochemical
impedance techniques were used for thecorrosion study.The results revealed that the
galvanostatic curves were shiftedtoward higher cathodic potentials as the pH values increased
whereas it was concluded that the increase in pH value leads to an increase in the polarization
resistance (Rp), attesting of a good corrosion resistance.
Keywords: electrodeposition, electrochemical, corrosion resistance
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
48
ID143
EXPERIMENTAL STUDY ON CORROSION INHIBITION EFFECT OF CALCIUM
TUNGSTATE ON MILD STEEL IN 1.0 M HYDROCHLORIC ACID SOLUTION
N.TOUBA1.*
, M. OUAKKI1, M.Y. MESSOUS
2, M.CHERKAOUI
1
1- Laboratory of materials, electrochemistry and environment, Faculty of Science, Ibn Tofail University, PB. 133-
14050 Kenitra, Morocco.
2- National Center for Energy, Sciences and Nuclear Techniques, Rabat, Morocco
*correspondant auteur E-mail: [email protected]
ABSTRACT
The corrosion inhibition of mild steel by calcium tungstate doped with Er rare earth ion in
hydrochloric acid 1.0 M has been investigated at various temperatures using electrochemical
techniques such as impedance spectroscopy (EIS) and potentiodynamic polarization. The
polarization curves indicated that inhibitor tested acted as mixed inhibitors. Inhibition efficiency
(IE %) increased with the increase of inhibitors concentration of tested compound. The
adsorption of tested compound on the steel surface in 1.0 M HCl follow the Langmuir isotherm
model, this result have been confirmed by EIS measurements. Data obtained from EIS studies are
analyzed to model inhibition process through appropriate equivalent circuit models. The
temperature effect on the corrosion behavior of steel in 1.0 M HCl without and with the inhibitor
was studied in the temperature range from 298 to 328K. The adsorption free energy and
activation parameters for the steel dissolution reaction in the presence of calcium tungstate were
determined.
Keywords: calcium tungstate, Corrosion inhibition, Mild steel, HCl, EIS.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
49
ID145
SYNTHESE, ETUDE EXPÉRIMENTALE ET THÉORIQUE DE DEUX
REGIOISOMERES DÉRIVÉS DE LA 1,2,3- TRIAZOLE UTILISÉS COMME
INHIBITEURS DE LA CORROSION D’UN ACIER DOUX EN MILIEU HCL 1M
H. RAHMANI1.2
, K. ISMAILY ALAOUI1, A. SAADY
1, A .EL HALLAOUI
2, M. TALEB
1,
J. LAZRAK1.
1. Laboratoire d’Ingénierie, Electrochimie, Modélisation et Environnement (LIEME), Faculté des sciences Dhar EL
Mahraz, Université Sidi Mohamed Ben Abdellah, Fès, Maroc.
2.Laboratoire de Chimie Organique, Faculté des sciences Dhar EL Mahraz, Université Sidi Mohamed Ben Abdellah,
BP : 1796, Fès, Maroc.
E-mail : [email protected]
RESUME :
La corrosion est un problème industriel important : le coût de la corrosion, qui recouvre
l'ensemble des moyens de lutte contre la corrosion, le remplacement des pièces ou ouvrages
corrodés et les conséquences directes et indirectes des accidents dus à la corrosion, est estimé à
2 % du produit brut mondial. Dans ce travail nous nous sommes intéressés à la synthèse des
dérivés de la triazole via la réaction decycloaddition 1,3-dipolaire conduit aux deux
régioisomères avec des bons rendements [1], ces produits ont montrés un excellent pouvoir
inhibiteur vis-à-vis la corrosion d’acier C38 en milieu HCl1M. Les résultats expérimentaux ont été
confirmés par une étude théorique en utilisant DFT à B3LYP / 6-31G (d, p). Le composé
(Hexmaj) est le meilleur inhibiteur et son efficacité inhibitrice augmente avec l'augmentation de
la concentration et atteint 92% à 10-3
M [2].
O
N
Ph
Et
N3
H (CH2)3CH3O
NEt
NN
N
H3C(H2C)3
Ph
+ O
N
Ph
Et
NN
N
H3C(H2C)3
+Toluene
/ 48h
HexmajHex min
Mots clés : triazole, cycloaddition, DFT, corrosion.
Reference
[1] Y.Aouine, A. El Hallaoui, A. Alami, Molbank, 2014, M 819.
[2] H. Rahmani,1,2 F. El-Hajjaji, A. El Hallaoui, M. Taleb, Z. Rais, M. El Azzouzi, B. Labriti, K. Ismaily Alaoui and
B. Hammouti ;Int. J. Corros. ScaleInhib., 2018, 7, no. 4, 509–527
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
50
ID146
ETUDE THEORIQUE ET EXPERIMENTALE DE L’EFFET INHIBITEUR DE DEUX
DERIVES D’ANILINES CONTRE LA CORROSION DE L’ACIER DOUX EN MILIEU
HCL 1M
A. SAADY1*, M.TALEB
1, K. I. ALAOUI
1, H. RAHMANI
1, 3, F. EL HAJJAJI
1, N. ARROUSSE
1,
A. EL BIACHE1, A. CHETOUANI
3, M. ALLALI
3
1-Laboratoire d'Ingénierie d’Electrochimie, Modélisation et d’Environnement (LIEME), Faculté des
sciences/Université Sidi Mohammed Ben Abdellah, Fès, Maroc.
2-Université de Lyon, Laboratoire de Chimie, CNRS - Ecole Normale Supérieure de Lyon, 46 allée d’Italie, 69007
Lyon France.
3-Laboratory of Organical Chemistry (LOC), Faculty of sciences, University Sidi Mohamed Ben Abdellah, Fez,
Morocco
3 LCAE, Faculté des Sciences, Université Mohammed 1
er, Oujda
ABSTRACT
Certains composés organiques sont considérés comme des inhibiteurs efficaces pour lutter contre
la corrosion des aciers dans le milieu acide, lorsqu’ils sont ajoutés en faibles concentrations, ils
peuvent réduire ou stopper la corrosion du métal exposé. Leur principe de fonctionnement se base
sur la protection du métal de son environnement. Dans ce travail, nous nous sommes intéressés à
l’étude de l’efficacité inhibitrice de deux dérivés d’anilines (M1 et M2) sur l'acier doux dans une
solution d'acide chlorhydrique 1M par détermination des pertes de masse, par analyse des courbes
de polarisation potentiodynamique et par les mesures d’impédance électrochimique.
Les résultats expérimentaux révèlent que ces composés ont un bon effet inhibiteur sur l'acier
doux dans une solution de HCl 1M. L'efficacité de protection augmente avec l'augmentation de la
concentration en inhibiteur. Des études de polarisation potentiodynamique ont montré que ces
deux dérivés agissent comme un type d'inhibiteur mixte et les données obtenues à partir des
études EIS ont été analysés pour modéliser le processus d'inhibition au moyen d'un modèle de
circuit équivalent approprié. Les courbes de Nyquist ont montré que, d’après l’augmentation des
concentrations en inhibiteurs, la résistance au transfert de charge augmente et que la capacité à
double couche diminue, entraînant une efficacité d'inhibition accroit. L'adsorption des deux
inhibiteurs sur une surface en acier obéisse au modèle de Langmuir. Ainsi, les paramètres
thermodynamiques et cinétiques ont été calculées et discutés.
Une étude théorique au niveau de la méthode DFT / B3LYP a été réalisée en utilisant le
programme gaussien 09 afin de corréler l'efficacité inhibitrice avec les paramètres structurels de
la molécule étudiée, ses propriétés électroniques d'inhibiteur ont été calculées et sont discutées.
Les valeurs de l'efficacité d'inhibition calculées à partir de ces techniques sont raisonnablement
en accord.
Mots clés : EIS, HCl, acier doux, DFT, B3LYP.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
51
ID148
SOL GEL COATING OF A NEW PHOSPHATE-NICKEL-TITANIUM COMPOSITE
MATERIAL: CHARACTERIZATION AND APPLICATION FOR CORROSION
PROTECTION
B. KHALIDOU ¹, H. EL AADAD¹, A. CHAHINE ¹, M. EBN TOUHAMI 2, P.H. MUTIN
3,
J.G.ALAUZUN 3
1 .Laboratory of physic-chemistry of vitreous and crystallized materials, Ibn Tofail University, Kenitra-Morocco
2. Laboratory of Materials Engineering and Environment: Modeling and Applications, Ibn Tofail University, Kenitra
Morocco
3. Chimie Moléculaire et Organisation du Solide Team, Institut Charles Gerhardt Montpellier, Montpellier-France
Email: [email protected]
ABSTRACT
A strong industrial interest is focused on the development of coatings for anticorrosion
protection. In this context, phosphate composite materials are expanding strongly due to their
chemical characteristics and their interesting physicochemical properties. Sol-gel coatings offer
high homogeneity and purity that may lead to obtain coating presenting good adhesion to metal
surface.
The goal behind this work is to develop efficient coatings for corrosion protection of steel to
extend its life.
In this context, a sol gel process allowing to obtain thin film coatings on carbon steel with high
resistance to corrosion has been developed.
The optimization of several experimental parameters such as the hydrolysis time, the
temperature, the coating technique, the molar ratio between precursors, the number of layers and
the drying mode has been realized in order to obtain a coating showing the best anticorrosion
properties.
The effect of these parameters on the microstructure and anticorrosion performance of the films
sol gel coating has been investigated using different characterization methods (FTIR, XRD,
Raman, XPS, SEM, Profilometer, Salt Spray Test ...).
An optimized coating presenting good adhesion and very stable anticorrosion properties in salt
spray test, which consists of a corrosive attack accelerated by an artificial salt spray consisting of
a solution of 5% NaCl, pH neutral, under precise conditions of temperature (35 ° C) and pressure
has been obtained.
Key words: sol gel coating, thin layers, FTIR, Raman, XPS, SEM / EDX, corrosion
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
52
ID149
INVESTIGATION OF NUCLEATION AND GRAWTH MECHANISM DURING
ELECTROCHEMICAL DEPOSITION OF TELLERIUM ON ITO SUBSTRATE
B. YOUBI1*
, Y. LGHAZI1
, M. AIT HIMI1, I. BIMAGHRA
1
1Laboratory Bio-Geosciences and Materials Engineering, Ecole Normale Supérieure, Hassan II University of
Casablanca, Morocco.
*Corresponding author: [email protected]
ABSTRACT
The electrochemical deposition mechanism of tellurium by reduction of the telluryl ion (HTeO2+)
from nitric acid medium on ITO substrate was investigated using two electrochemical techniques:
the cyclic voltammetry and the chronoamperometry.
The electrochemical study shows that many processes and reactions can be considered to obtain
Te by reduction depending on different deposition parameters notably pH, concentration and
temperature. It has been identified that Te electrodeposition is diffusion controlled quasi-
reversible reaction. Furthermore, by chronoamperometry, the measured current transient curves
were compared with the theoretical models, proposed by Scharifker-Hills and Heerman-Tarallo
models . It was found that the nucleation and growth mechanism of Te on ITO substrate can be
instantaneous or progressive depending to the deposition parameters. The modelization of the
experimental curves allows determining kinetic parameters of tellurium growth. The thin
tellurium layers electrodeposited by chronoamperometry are characterized by X-ray diffraction,
and Scanning Electron Microscopy.
KeyWords: Tellurium, Electrodeposition, Nucleation, Diffusion
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
53
ID151
EXPERIMENTAL AND THEORETICAL TOOLS FOR CORROSION INHIBITION
STUDY OF MILD STEEL IN AQUEOUS SULFURIC ACID SOLUTION BY NEW
PYRAN DERIVATIVE
M. KHATTABI1, F. BENHIBA
1, H. ZARROK
1, S. TABTI
2, R. TOUZANI
3, A. GUENBOUR
4,
M. ALLALI5, H. OUDDA
1, A. ZARROUK
4
1Laboratory of Separation Processes, Faculty of Sciences, IbnTofail University, Kenitra, Morocco.
2Laboratory of Electronic Materials and Systems, Faculty of Science and Technology department of science and
materials, University of Mohamed El Bachir El Ibrahimi-El Anasser- Bordj Bou Arreridj, 34000, Algeria.
3Laboratory of Applied Chemistry and Environment, LCAE, COSTE, Faculty of Sciences, Mohammed Premier
University, B.P. 717, 60 000 Oujda, Morocco.
4Laboratory of Materials, Nanotechnology and Environment, Faculty of Sciences, Mohammed V University, Av. Ibn
Battouta, PO Box 1014 Agdal-Rabat, Morocco.
5Institut Supérieur des Professions Infirmières et Techniques de Santé, ISPITS-Fès, Hôpital Elghassani, Fes,
Morocco.
ABSTRACT
The adsorption behaviour of (E)-4-hydroxy-3-(3-(3-hydroxy-4-methoxyphenyl)acryloyl)-6-
methyl-2H-pyran-2-one (HMMPO) as inhibitors for mild steel corrosion in H2SO4 0.5 M have
been studied experimentally and computationally. The analysis of the metal specimen surfaces
was done using scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy
(EDAX). Corrosion mitigation is by chemisorption mechanism and can be best described with
the Langmuir adsorption isotherm. Electrochemical measurements showed that this organic
compound is a mixed type inhibitor. The EIS spectra expressed principally as a slightly depressed
semi-circle shape corresponding to a single time constant in Bode diagrams. Observable
correlation was found between experimental corrosion inhibition efficiency and the theoretical
data.
Keywords: Mild steel; Corrosion inhibition; Electrochemical techniques; SEM/EDAX; DFT;
Monte Carlo simulations.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
54
ID151
PERFORMANCE AND COMPUTATIONAL STUDIES OF TWO SOLUBLE PYRAN
DERIVATIVES AS CORROSION INHIBITORS FOR MILD STEEL IN HCL
M. KHATTABI1, F. BENHIBA
1, H. ZARROK
1, S. TABTI
2, R. TOUZANI
3, M. EL HEZZAT
4,
M. ALLALI5, M. ASSOUAG
6, H. OUDDA
1, A. ZARROUK
7
1Laboratory of Separation Processes, Faculty of Sciences, IbnTofail University, Kenitra, Morocco.
2Laboratory of Electronic Materials and Systems, Faculty of Science and Technology department of science and
materials, University of Mohamed El Bachir El Ibrahimi-El Anasser- Bordj Bou Arreridj, 34000, Algeria.
3Laboratory of Applied Chemistry and Environment, LCAE, COSTE, Faculty of Sciences, Mohammed Premier
University, B.P. 717, 60 000 Oujda, Morocco.
4Laboratoire de Physico-Chimie des Matériaux Vitreux et Cristallisés, Faculté des Sciences, Université Ibn Tofail,
BP 133 Kenitra, Morocco.
5Institut Supérieur des Professions Infirmières et Techniques de Santé, ISPITS-Fès, Hôpital Elghassani, Fes,
Morocco.
6Team Advanced Materials and Applications ENSAM, Moulay Ismail University, PB 15290 Al Mansour, Meknes
Morocco.
7Laboratory of Materials, Nanotechnology and Environment, Faculty of Sciences, Mohammed V University, Av. Ibn
Battouta, PO Box 1014 Agdal-Rabat, Morocco.
ABSTRACT
The present study is aiming to explore the effect of 4-Hydroxy-6-methyl-3-(3-quinolin-8-yl-
acryloyl)-pyran-2-one (HMQP) and 3-[3-(4-Dimethylamino-phenyl)-acryloyl]-4-hydroxy-6-
methyl-pyran-2-one (DMPHP) on mild steel (MS) corrosion in acid solution (1 M HCl). The
compound was tested at various concentrations (0.001-1 mM) and five temperatures (298, 308,
318, and 328 K) to determine the optimal concentration and temperature range for the best
corrosion inhibiting effect. In evaluating the inhibition efficiency, weight loss measurement,
potentiodynamic polarization measurement, electrochemical impedance spectroscopy, SEM/EDS
and theoretical methods were used. The inhibition efficiencies increase with increase in
concentration and decreases with temperature. The maximum inhibition efficiency was found
90% and 85.4% at 298 K in the presence of 1 mM of DMPHP and HMQP respectively. The
experimental adsorption data obeyed the Langmuir isotherm model. The polarization parameters
suggest that DMPHP and HMQP are mixed type inhibitors. The results of the EIS study suggest
that these compounds inhibit corrosion by adsorption mechanism. A good correlation between
theoretical and experimental results was obtained.
Keywords: Mild steel; Pyran derivatives; Acid corrosion; SEM/EDS; Theoretical study.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
55
ID152
THE EFFECT OF ELECTROLYTE CONCENTRATION AND TEMPERATURE ON
THE ELECTROCHEMICAL BEHAVIOUR OF TIN IN ALKALINE MEDIA
S. MOUAAMOUNa,b*
, A. AIT ADDI
b, E. AIT ADDI
a, M. HAMDANI
b
a Equipe de recherche Génie des Procédés et Ingénierie Chimique, Ecole Supérieure de Technologie d’Agadir, B.P:
33/S, Agadir, Maroc
b Equipe de Chimie Physique et Environnement (ECPE), Faculté des Sciences d’Agadir,
BP. 8106, cité Dakhla, Agadir, Maroc
ABSTRACT
Tin is a metal widely used in many application due to its corrosion resistance. It is employed as a
protective coating material for iron in contact with aggressive solutions and also in food and
electronic industries. Several work has focussed on the electrochemical behaviour of tin in
alkaline or slightly alkaline medium [1-2].
In the present work, the anodic behaviour of tin in different concentration levels of NaOH and
different temperatures was investigated by using potentiodynamic technique and electrochemical
impedance spectroscopy (EIS). The results obtained show that the polarization curves exhibit
active/passive transition followed by passivation phenomenon with rupture of passivity. The
active region involves two anodic peaks corresponding to a stepwise oxidation of Sn(0) to Sn(II)
and Sn(II) to Sn(IV) species leading to a more stable final configuration through a dehydration
process. The passivity is due to the presence of thin film of SnO2 on the anode surface formed by
dehydration of Sn(OH)4. It has been demonstrated that the increasing of NaOH concentration and
temperature promotes the active dissolution of tin and reduces the attainment of passivity. The
electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization are in good
agreement.
KEYWORDS: tin, corrosion, passivity, alkaline medium.
[1] P. Alvarez, S. Ribotta, M. Folquer, C. Gervasi, J. Vilche, J. Corrosion Science 44 (2002) 49-65.
[2] A. Palacio-Padros, F. Caballero-Briones, I. Diez-Perez, F. Sanz, J. Electrochimica Acta.111(2013) 837-845.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
56
ID153
STUDY OF ESSENTIAL OIL AS A NOVEL ECO-FRIENDLY CORROSION
INHIBITOR OF MILD STEEL IN 1 M HYDROCHLORIC ACID MEDIUM
J. LAZRAK 1, A. MARSOUL
2, A. BOUKIR
3, M. TALEB
1, S.A. MRANI
1, A. SAADY
1, F. EL-
HAJJAJI 1, A. CHETOUANI
4 Y. ELATKI
5, T. SAFFAJ
6
1Laboratory of engineering of electrochemistry, modelisation and environment, Faculty of Sciences, university of
sidi Mohamed ben abdelah , BP 1796, 30000 Atlas, Fès, Morocco.
2Laboratory of Chemistry of Condensed Matter, Sidi Mohamed Ben Abdellah University, Faculty of Science and
Technology of Fes, B.P. 2202 - Immouzer Road -Fes- Morocco.
3 Laboratory of Applied Chemistry, Faculty of Science and Technology, Fez
4 LCAE, Faculté des Sciences, Université Mohammed 1
er, Oujda
5 Laboratory of Physiology Pharmacology and Environmental Health, Department of Biology, Faculty of Sciences
DharMehraz, University Sidi Mohamed Ben Abdellah, B.P. 1796, Atlas, Fez, Morocco.
6 Laboratory of Applied Organic Chemistry, Faculty of Science and Technology, Fez
E-mail: [email protected]
ABSTRACT
The CiOanalyzed by Chromatography-flame ionization detector (CG-FID)and gas
chromatography–mass spectrometry (GC–MS) was made[1]. The analyzed oils consist mainly
T-C (91.01%) the major constituents and several low-percentage compounds. on the corrosion of
mild steel in aqueous 1 M hydrochloric acid studied by wight loss technique, electrochemical
impedance spectroscopy (EIS) and potentiodynamic polarization. the inhibition efficiency
increased with the increase of inhibitor concentration and reached up to 92 %. Experimentally,
the adsorption of the inhibitors on the surface of mild steel in 1.0 M HCl solution was found to
obey Longmuir‘s adsorption isotherm. The effect of temperature showed that the oil absorbed on
the mild steel substrate by physical adsorption [2]. Thereafter, the Potentiodynamic polarization
curves indicated that the essential oil behaves as mixed-type inhibitor [3].
Keywords: Corrosion inhibitor; Mild steel; Wight loss technique; Electrochemical impedance
spectroscopy; Potentiodynamic polarization.
References
1. Adams R.P., Identification of essential oil components by gas chromatography/massspectrometry. 2007. Carol
Stream USA.doi:10.1163/-q3-SIM-00374.
2 .Bentiss F., Traisnel M., Lagrenee M.,Corros. Sci. 42 (2000) 127.
3 .El-Hajjaji F., Greche H., Taleb M., Chetouani A., Aouniti A., Hammouti B., J. Mater. Environ. Sci.7 (2) (2016)
566-578.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
57
ID154
EXPERIMENTAL AND QUANTUM CHEMICAL STUDIES OF SOME PYRAZOLE
DERIVATIVES AS CORROSION INHIBITORS ON MILD STEEL IN MOLAR
HYDROCHLORIC ACID MEDIUM
S. ALAOUI MRANI 1, J. LAZRAK
1, N. ARROUSSE
1, F. El HAJJAJI
1, A. CHETOUANI
2,
M.TALEB1
1Engineering, Electrochemistry, Modelling& Environmental Laboratory (LIEME),Chemistry department, Faculty of
SciencesDhar El Mahraz Fes, SidiMohammed Ben AbdallahUniversity, Morocco
2 LCAE, Faculté des Sciences, Université Mohammed 1
er, Oujda
ABSTRACT:
In this study, we discussed the inhibition properties of three new Pyrazole derivatives (DPA,
DPM and DPF) against the corrosion of mild steel in 1.0 M HCl, using the weight loss technique,
the stationary method and the transitional method. The experimental results show that the
inhibition properties increase with the concentration and can reach a limit value of 97% for the
inhibitor DPA at 10 –3
M. The curves of polarization show that the Pyrazole derivatives were a
mixed inhibitor. The data obtained by electrochemical impedance spectroscopy were analyzed to
be modeled by appropriate equivalent circuit models. The evolution of the temperature leads to a
decrease in the inhibition efficiency of the Pyrazole compounds.
Several adsorption isotherms have been modeled such as Langmuir, Temkin, Frumkin, Flory–
Huggins, Freundlich and the kinetic thermodynamic model of El-Awady, in order to provide
additional information on the inhibitory properties of the compounds studied. The coefficient of
determination values of all the isotherms are very high, from the two models of Flory–Huggins
and El-Awady we find that the adsorption of molecules on the surface of the steel moves more
than a single molecule of water which is at odds with the Langmuir isotherm. Whereas the
isotherms of Temkin and Frumkin suggest the existence of the lateral interactions between the
adsorbed species. Scanning electron microscopy (SEM) and EDX analyzes were used to
characterize the chemical composition of the film formed on the surface of the steel.
Surface studies have shown that the inhibitory layer consists of an iron oxide/hydroxide mixture
in which the N, F atoms are incorporated. The DFT studies have also been carried out for
protonated form of the inhibitor molecules by considering that in acidic medium the heteroatoms
of organic inhibitors easily undergo protonation. The experimental and density functional theory
(DFT) studies were in good agreement.
Keywords: pyrazole, mild steel, corrosion inhibition, surface, adsorption, DFT
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
58
ID155
COST-EFFECTIVE ELECTROCHEMICAL NANOBIOSENSORS FOR MICRORNA-
125a AND MICRORNA-21 DETECTION
G. YAMMOURI 1*
, H. MOHAMMADI 1, A. AMINE
1
1 Laboratoire de Génie des Procédés & Environnement Faculté des sciences et technique, Université Hassan II de
Casablanca, Mohammedia 20650, Maroc
ABSTRACT
MicroRNAs are non-coding RNA sequences (21 to 25-nucleotide) considered as cancer
biomarkers. The detection of microRNA biomarkers using electrochemical biosensors based
nanomaterials become attractive method. Indeed, nanomaterials allowed a detection with high
sensitivity owing to their high active surface and conductivity and to their promotion of electron
transfer. In this work, we developed a novel Cost-effective electrochemical biosensors
incorporating nanomaterials for microRNA-21 and microRNA-125a detection [1]. The principle
of the proposed biosensor is based on the hybridization of the microRNA with a probe capture
(complementary sequence) immobilized on the surface of the electrode modified with
nanomaterials. A carbon black (CB) and nanocomposite of CB and gold nanoparticles (AuNPs)
were employed to modify pencil graphite electrodes. The impedance spectroscopy (EIS) and
differential pulse voltammetry (DPV) were used as electrochemical techniques for microRNAs
detection. The obtained results indicate that the hybridization was successfully performed. The
biosensor showed good selectivity and sensitivity with a detection limit of 10 pM for
microRNA-125a and 1 fM for microRNA-21. The study of the matrix effect was performed in
serum sample and successful results have been obtained, with a recoveries equal to 93% and 98
% for microRNA-125a and microRNA-21, respectively. The proposed biosensors could be used
in the cases of clinical diagnosis and biomedical research.
Keywords: MicroRNA, Cancer biomarkers. Nanomaterial, EIS, DPV.
[1] Yammouri G, Mandli J, Mohammadi H, Amine A (2017) Development of an electrochemical label-free
biosensor for microRNA-125a detection using pencil graphite electrode modified with different carbon
nanomaterials. J Electroanal Chem 806:75–81.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
59
ID157
ETUDE EXPERIMENTALE ET APPROCHE QUANTIQUE DE
L’ACTIVITEANTICORROSIVE DES MOLECULES ORGANIQUES A BASE DE
PYRIMIDINE-PYRAZOLE EN MILIEU ACIDE CHLORHYDRIQUE MOLAIRE
N. ARROUSSE1*
, K. I. ALAOUI1, F. El-HAJJAJI
1, M. TALEB
1
1Laboratoire d'Ingénierie d’Electrochimie, Modélisation et d’Environnement (LIEME), Faculté des
sciences/Université Sidi Mohammed Ben Abdellah, Fès, Maroc
Email correspondante : [email protected]
RESUME
L’étude de l’inhibition de la corrosion des matériaux en milieux acides par des composés
organiques reste un domaine de recherche très attractif en raison de la large utilisation des
solutions acides dans l’industrie.
L’objectif de ce travail est d’étudier l’effet de deux nouveaux composés organiques à base de
pyrimidine-pyrazole sur l’inhibition de la corrosion de l’acier C38 en milieu HCl 1M. Les
résultats ont été démontrés par la méthode gravimétriqueet électrochimie Suivi d’une approche
quantique basés sur la méthode DFT à B3LYP /6-31G ** en utilisant gaussien 09[2].Les résultats
obtenus montrent que ses dérivées de pyrimidine-pyrazole a un effet inhibiteur significatif et que
leur adsorption à la surface du métal obéit à l’isotherme de Langmuir, El awady et Florry-
huggins. Les résultats obtenu théoriquement est en bonne corrélation avec celle obtenu
expérimentalement.
Mots-Clés : Inhibition, HCl 1M, Pyrimidine-pyrazole, DFT, Isotherme.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
60
ID159
EXPERIMENTAL AND THEORETICAL STUDIES OF 5-((4,5-DIHYDRO-4-O
TOLYLTETRAZOL-1-YL)METHYL)QUINOLIN-8-OL AS EFFECTIVE CORROSION
INHIBITOR FOR MILD STEEL IN 1.0 M HCL
H. ABOUT1,2
, M. EL FAYDY2, Z. ROUIFI
1,2, F. BENHIBA
1, M. BOUDALIA
3, H. ZARROK
1, A.
GUENBOUR3, B. LAKHRISSI
2, H. OUDDA
1, A. ZARROUK
3
1Laboratory of separation processes, Faculty of Sciences, University Ibn Tofail, PO Box 242, Kenitra, Morocco.
2Laboratory of Agro-Resources, Polymers and Process Engineering, Department of Chemistry, Faculty of Sciences,
Ibn Tofail University, PO Box 133, 14000, Kenitra, Morocco
3Laboratory of Materials, Nanotechnology and Environment, Faculty of Sciences, Mohammed V University, Av. Ibn
Battouta, PO Box 1014 Agdal-Rabat, Morocco.
E-mail: [email protected]
ABSTRACT
A new organic inhibitor, namely 5-((4,5-dihydro-4-o-tolyltetrazol-1-yl)methyl)quinolin-8-ol
quinoline, denoted TTQ was synthesized and characterized using 1H and
13C NMR
spectroscopies. Thus, its corrosion inhibition on mild steel in 1.0 M HCl solution was
investigated by weight loss and electrochemical measurements. The experimental results were
supported by DFT calculations. The temperature effect on the corrosion behaviour of mild steel
in 1.0 M HCl without and with TTQ was studied in the temperature range 298–328 K. Inhibition
efficiency of TTQ increased with increase in the concentration of inhibitor and decreased with
the increase in temperature. It is found that the charge transfer resistance increases and double
layer capacitance decreases with TTQ addition due to the adsorption of the inhibitor molecules
on the mild steel surface. The adsorption of the tested inhibitor follows Langmuir adsorption
isotherm. The values of activation energy Ea and the thermodynamic parameters, such as Kads,
adsG were calculated. The calculated adsG value showed that corrosion inhibition is mainly
controlled by a chemisorption process. Quantum chemical calculation by DFT method was
performed to identify the reactivity of tested molecules towards corrosion inhibition, and the
results are in good agreement with the experimental investigations.
Keywords: Mild steel, Corrosion inhibition, Quinoline derivative, Weight loss, EIS, DFT.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
61
ID160
CORROSION INHIBITION STUDIES OF NEW PYRANE DERIVATIVE ON STEEL IN
1 HCL SOLUTION ACID
A. ELHATTAK1*
, M. BOUDALIA2 , F. BENHIBA
1, H. OUDDA
1, H. SERRAR
3, S. BOUKHRIS
3 ,
A. BELLAOUCHOU2, A. GUENBOUR
2, A. ZARROUK
2
1Laboratory of Separation Processes, Faculty of Sciences, IbnTofail University, Kenitra, Morocco.
2Laboratory of Materials, Nanotechnology and Environment, Faculty of Sciences, Mohammed V University, Av. Ibn
Battouta, PO Box 1014 Agdal-Rabat, Morocco.
3Laboratory of Organic Synthesis and Agrochemistry. Department of Chemistry. Faculty of Sciences. Ibn Tofail
University. B.P. 133-Kenitra.
Email: [email protected]
ABSTRACT
The inhibition ability of (E)-3-(1-(chlorophenyl)imino)ethyl)-4-hydroxy-6-methyl-2H-pyran-2-
one on the mild steel in 1 M hydrochloric acid solution was studied by electrochemical
techniques. (E)-3-(1-(chlorophenyl)imino)ethyl)-4-hydroxy-6-methyl-2H-pyran-2-one inhibited
steel corrosion in 1 M HCl solution significantly and the inhibition efficiency increased with
inhibitor concentration. The adsorption of the inhibitor was followed Langmuir adsorption
isotherm. The effect of temperature on the corrosion behavior with the addition of this compound
in the range of temperature from 298 to 328 K. The inhibition efficiency decreases slightly with
the increase in the temperature. The kinetic and thermodynamic parameters were determined and
discussed. Polarization measurements indicated that, the studied compound acts as a mixed type
inhibitor. Quantum chemical approach, using the density functional theory (DFT), was
implemented in order to get a better understanding about the relationship between the inhibition
efficiency and molecular structure of this inhibitor and the calculated quantum chemical
parameters were discussed.
Keywords: Acid corrosion, Mild steel, Electrochemical techniques, Langmuir, DFT.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
62
ID164
NEW ORGANIC-INORGANIC HYBRIDS OF BENZIMIDAZOLE-PHOSPHATE:
SYNTHESIS, CHARACTERIZATION AND APPLICATION AS CORROSION
INHIBITORS FOR MILD STEEL IN SULFURIC ACID
H. EL AADAD1*
, B. KHALIDOU1, M. GALAI
2, M. OUAKKI
3, A. CHAHINE
1,
M. EBN TOUHAMI2
1 Laboratory of physico-chemistry of vitreous and crystallized materials (LPCVCM), Faculty of Science, Ibn Tofail
University, Kénitra, Morocco
2 Laboratory of Materials Engineering and Environment: Modeling and Applications (LMEEMA), Faculty of
Science, Ibn Tofail University, Kénitra, Morocco
3 Laboratory of Materials, Electrochemistry and Environment, Faculty of Science, Ibn Tofail University, Kénitra,
Morocco
*correspondence to: [email protected]
ABSTRACT
Organic-inorganic hybrids appear as a creative alternative to design new materials with unusual
features for allow the development of academic research and innovative industrial applications.
The synthesis of hybrid materials by soft chemistry was aroused a very strong interest in
academic and industrial worlds. This method was offered the possibility of combining the
properties of organic (flexible) and inorganic materials (hard and fragile) to form new hybrid
compound, pure, homogeneous and efficient. This process has several advantages: to be
inexpensive, to control perfectly the stoichiometry, and to confer high purity on the synthesized
material. The hybrids derived from phosphate are materials of increasing interest based on both
structural characteristics and functional applications, including corrosion inhibition for different
metals.
In the present study, new organic-inorganic hybrids of Benzimidazole-Phosphate were
synthesized via a soft chemistry process. The phosphate was used as inorganic precursor with
different molar ratios to study its influence on the properties and structure of hybrids materials.
The structural and morphological properties of synthesized hybrids were studied by FTIR, DRX,
UV-visible, SEM and EDX analysis. Then the corrosion inhibition efficiency of synthesized
hybrids was evaluated for mild steel with various concentrations in 0.5 M H2SO4 by
potentiodynamic polarization and electrochemical measurements. According to the results of
electrochemical impedance spectroscopy, the inhibition efficiency of hybrids depends on its
concentration, reaching a maximum of 97.5 % at 100 ppm.
Keywords: Organic-inorganic hybrid, Benzimidazole, Phosphate, Soft chemistry, Mild steel,
Corrosion inhibition
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
63
ID167
THE CORROSION RESISTANCE OF 5005 ALUMINUM ALLOY BY ANODIZING
TREATMENT IN A MIXTURE OF PHOSPHORIC-BORIC ACIDS
Z. QUEBBOU1* and M. CHAFI
1
1 Laboratory of Engineering, Processes and Environnement(LEPE), Higher School of Technology,
Eljadida Road, KM 7, CASABLANCA, Morocco
ABSTRACT
The influence of anodizing parameters of 5005 aluminum alloy by a mixture of phosphoric-boric
acid on the corrosion resistance was studied. Anodizing times, phosphoric acid concentration,
boric acid concentration, and anodizing voltage has been investigated. Potentiodynamic
polarization and electrochemical impedance spectroscopy (EIS) were used to study the corrosion
behavior of the anodized aluminum. Scanning electron microscopy (SEM) method was used to
study the surface of the alloy before and after anodized aluminum. The results obtained shows
that the anodizing treatment of 5005 Aluminum alloy in phosphoric-boric acids provides better
corrosion resistance in comparison with the anodizing treatment in phosphoric acid.
Keywords: 5005 aluminum alloy; anodization; corrosion; potentiodynamic polarization; EIS;
SEM.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
64
ID169
ETUDE DU COMPORTEMENT ELECTROCHIMIQUE DES FILTRATS ISSUS DE LA
LIXIVIATION DE LA POUDRE DES DECHETS DE CARTES DE CIRCUITS
IMPRIMES (CCI)
H. MOKHLIS1*, R. DRISSI DAOUDI
1, A. EL MANSOURI
1, M. AZZI
1
1Laboratoire Interface Matériaux & Environnement, Faculté des Sciences Aîn Chock, Université Hassan II de
Casablanca, B.P 5366 Maârif, Casablanca, Maroc.
RESUME
D’après le dernier rapport alarmant de l’Université des Nations Unies (UNU) publié en 2017, la
production des déchets d’équipements électriques et électroniques (DEEE) a atteint un nouveau
record mondial historique avec 44,7 millions de tonnes jetées en 2016 et la tendance montre que
la barre des 50 millions devrait très vite être dépassée. L’étude de l’UNU estime la valeur de
l’ensemble de ces déchets à 55 milliards d’euros, en raison des métaux précieux qu’ils renferment
(or, argent, palladium, …), semi-précieux (cuivre, aluminium, …) et communs (fer, acier, …), en
plus des différents plastiques recyclables. Parmi les DEEE les plus utiles à traiter, on trouve les
cartes de circuits imprimés (CCI) qui représentent l’élément essentiel de presque tous les
équipements électriques et électroniques et en particulier les CCI des ordinateurs qui représentent
en moyenne 13% du poids de l’unité centrale d’un ordinateur de bureau et qui contiennent de
nombreux métaux.
L’objectif de ce travail est de réaliser l’étude du
comportement électrochimique des filtrats issus
de la lixiviation de la poudre des déchets de
cartes de circuits imprimés (DCCI). La
lixiviation est réalisée en utilisant plusieurs
solutions : la glycine, l’EDTA, l’ammoniac, ....
Plusieurs techniques électrochimiques sont
utilisées dans le cadre de cette étude : la
voltampérométrice cyclique, la
chronoampérométrie, les impédances.
Figure: voltampérogramme du filtrat issu de la lixiviation de la poudre des DCCI avec agitation pendant 8h et à température
ambiante. Solution de lixiviation : Glycine. Vitesse de balayage 20 mV/s. Electrode de travail : carbone vitreux.
Mots Clés : Déchets de Cartes de Circuits Imprimés (DCCI), lixiviation, voltampérométrie
cyclique
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
65
ID171
THEORETICAL AND EXPERIMENTAL STUDY OF THE CORROSION INHIBITION
OF BRASS IN 3.0% NACL SOLUTION USING THE CLOVE ESSENTIAL OIL AND ITS
EXTRACT EUGENOL
S. TAZI1*, I. RAISSOUNI, F. CHAOUKET, D. BOUCHTA, A. CHRAKA, N. BENSEDDIK,
H. DOUHRI
1Laboratory of Materials and Interfacial Systems. Team ERESI. University Abdelmalek Essaadi ,Faculty of
Sciences, Tetouan
* Corresponding author .E-mail: [email protected]
ABSTRACT
The natural substances were the subject of many researches in biology in order to determine their
active effects in the medical field. Currently, the extracts of natural substances find others
application such as corrosion inhibition. Indeed, on the one hand interesting results were obtained
with essential oils in materials protection field and on the other hand, these inhibitors were
recognized like not toxic substances and which does not present risk of environmental pollution
compared with the organic inhibitors. In previous work, we studied the effect of the essential oil
of the clove (recognized in the medical field by its properties analgesic and antiseptic) on the
corrosion of brass (70% Cu/30% Zn) in NaCl 3%. The results obtained showed a very good
improvement of the resistance of alloy against to salt corrosion. In the objective to determine the
component most active of the constituents of this oil, and which contributes more to inhibition of
the corrosion of this alloy, we proceeded to the extraction of Eugenol from the essential oil of the
clove. So, we studied the effect of some parameters such as the concentration and the temperature
on the inhibiting capacity of Eugenol by using polarization and electrochemical impedance
spectroscopy (EIS). Quantum chemical calculations well support the experimental results.
Keywords: Brass (Cu-Zn), Inhibition, Clove, Eugenol, NaCl 3%, Quantum chemical
calculations.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
66
ID172
ETUDE DES MECANISMES D’ELECTRODEPOSITION D’OXYDE DE MANGANESE
SUR ITO
M. AIT HIMI1*
, S. El GHACHTOULI2, B. YOUBI
1, Y. LGHAZI
1, I. BIMAGHRA
1
1 Laboratoire Bio-Géosciences et Ingénierie des Matériaux, Ecole normale supérieure, Université Hassan II,
Casablanca, Maroc.
2 Laboratoire Interface matériaux Environnement, Faculté des Sciences Ain Chock, Université Hassan II,
Casablanca, Maroc.
E-mail: [email protected]
ABSTRACT:
Les oxydes de manganèse suscitent beaucoup d'intérêt pour diverses applications potentielles:
batteries rechargeables, capteurs chimiques, et traitements des déchets dangereux. L´intérêt porté
à cette famille d’oxydes est lié principalement à leur grande surface spécifique, réactivité
d‘oxydation importante et leur structure cristalline. Il existe plusieurs méthodes de préparation
d’oxyde de manganèse: sous forme de poudre ou en couche mince par voie chimique ou
électrochimique.
Dans ce travail, nous nous sommes intéressés à l’élaboration d’oxyde de manganèse par voie
électrochimique sur un substrat en verre revêtu d’Oxyde d’Indium-Etain (ITO). Cette étude nous
a permis non seulement l’obtention des couches minces adhérentes de MnO2, mais aussi l’étude
des mécanismes de déposition en se basant sur les voltammogrammes, les transitoire courant-
temps expérimentaux obtenus et des modèles théoriques.
L´étude du mécanisme de la cinétique de réaction d’élaboration d’oxyde de manganèse a été
effectuée en prenant en compte plusieurs paramètres à s’avoir : la concentration des ions
manganèse, la vitesse de balayage et le potentiel de déposition.
La réaction d’électrodéposition du MnO2 sur ITO est une réaction quasi-réversible contrôlée par
la diffusion et le mécanisme de nucléation suit le modèle 3D instantanée.
Les études morphologiques ont été réalisés par la diffraction des rayons X et la microscopie
électronique à balayage couplé par l’EDX.
Mots clés: L’oxyde de manganèse, Electrodéposition, Nucléation, chronoampérométrie,
voltamétrie cyclique.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
67
ID177
TEXTILE AZO DYE AS A CORROSION INHIBITOR FOR ALUMINUM ALLOY IN
SODIUM CHLORIDE MEDIUM
A. El MAZYANI 1* and M. CHAFI
1
1 Laboratory of Engineering, Processes and Environment (LEPE) , High School of Technology, University Hassan II,
BP 8012, Oasis Casablanca, Morocco.
*E-mail : [email protected]
ABSTRACT
The corrosion behavior of aluminum alloy in sodium chloride solution medium with and without
addition of a textile dye Direct Blue 15 at different concentrations was studied using different
electrochemical and corrosion techniques such as open circuit potential, tafel polarization,
electrochemical impedance spectroscopy (EIS) to analyze the inhibiting performances. The
results indicate that the azo dye acts as an inhibitor in the alkaline environment by adsorption on
the metal surface. The inhibition efficiency was found to increase with dye concentration and the
corrosion rate decrease. The effect of temperature on the corrosion behavior of aluminum in 3%
NaCl was also studied in the range 298 K and 328 K. The inhibition performance was tested by
immersing aluminum in 3% NaCl solution using electrochemical methods; potentiodynamic
polarization (PP) curves and electrochemical impedance spectroscopy (EIS). (PP) measurements
showed that inhibitor can be considered as mixed-type inhibitor with predominant cathodic action
and with inhibition efficiencies that improve with concentration. Electrochemical impedance
spectroscopy measurements reveal that the corrosion resistance of oxide film increases with dye
inhibitor concentrations. The azo dye inhibits the corrosion by adsorbing on the aluminum alloy
surface obeying Langumir adsorption isotherm. The values of inhibition efficiency obtained
from weight loss, polarization curves an EIS are in good agreement.
Kayworks: textile, corrosion inhibitor, aluminum, sodium chloride medium
References
[1]. A.S. Fouda a, A.A. Al-Sarawy b, F.Sh. Ahmed c, H.M. El-Abbasy a , Journal of Corrosion Science,vol. 51, p.
485-492, (2009).
[2]. 2.18Marine Corrosion B. Phull 308 Humphrey Drive, Wilmington, NC 28411, USA 2010 Elsevier , Volume 2
[3]. M. W. Kendig, R. G. Buchheit, Corrosion Inhibition of Aluminum and Aluminum Alloys by Soluble Chromates,
Chromate Coatings, and Chromate-Free Coatings, CORROSION. (2003);59(5):379-400.
[4]. E.E.Oguzie. ‘’ Corrosion inhibition of aluminium in acidic and alkaline media by Sansevieria trifasciata extract,
Journal of Corrosion Sience,vol.49,p1527-1539 (2007).
[5]. Loutfy H. Madkour,* R. M. Issa and I. M. El-Ghrabawy, “Kinetics of Substituted Bis- and Mono-azo Dyes as
Corrosion Inhibitors for Aluminium in Hydrochloric Acid and Sodium Hydroxide Solutions ,J. Chem. Research (S),
p. 408-409, (1999).
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
68
ID179
EFFECT OF TEMPERATURE ON THE CORROSION OF SS 31-27 IN
HYDRODYNAMIC CONDITIONS
S. SKAL 1*, Y. KERROUM
1, Y. EL AOUFIR
1, A. GUENBOUR
1, A. BELLAOUCHOU
1,
M. TABYAOUI 1, H. IDRISSI
2, A. ZARROUK
1
1 Mohammed V University, Faculty of Science, Department of Chemistry, Laboratory of Materials, Nanotechnology
and Environment, Rabat, Morocco.
2 INSA Lyon, Department of Chemistry, Laboratory of Materials and Science, Lyon, France.
* Corresponding author: [email protected]
ABSTRACT:
In the phosphoric acid production industry, stainless steels are present in all manufacturing units.
Several types of these alloys are used depending on the environment prevailing in each stage of
manufacture. Nevertheless, these materials suffer from serious corrosion problems due to the
chemical aggressiveness of the acid medium coupled with other thermal and mechanical
constraints. Given the importance of the temperature factor of the corrosive medium in the
kinetics of the reactions, it is essential to know the influence of the temperature on the
aggressiveness of the phosphoric medium in case of presence of the abrasive particles; thus, the
behavior of the passive layers formed on the surface of the material. This work led us to study the
effect of temperature and hydrodynamic conditions on the behavior of Alloy 31%Ni -27%Cr
using various stationery and transient electrochemical methods coupled with SEM-EDX, UV-
Vis-NIR spectroscopy and DRX analysis.
Cathodic and anodic current densities increase with increasing temperature in the polluted
phosphoric acid solution. This shows that the temperature favors the hydrogen evolution reaction
and passive films have undergone significant disturbances. Increasing the temperature increases
the activity of the aggressive ions adsorbed on the surface, thereby accelerating the dissolution
process and the exchange kinetics between the electrode surface and the electrolyte. UV-Vis-NIR
spectroscopy and DRX analysis exhibited that temperature favors the formation of metal oxides
on the surface, which the EIS discloses that film was less protective. The relative observations of
the alloy show significant changes in surface condition, illustrated by patterns and corroded areas
that show a marked degradation of the steel surface at 80 ° C.
Keywords: Hydrodynamic Conditions, Stainless Steel, UV-VIS-NIR spectroscopy, DRX
analysis, SEM-EDX.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
69
ID180
TWO NOVEL BENZODIAZEPINES AS CORROSION INHIBITORS FOR CARBON
STEEL IN HYDROCHLORIC ACID: EXPERIMENTAL AND COMPUTATIONAL
STUDIES
Y. EL AOUFIR1,2*
, H. LGAZ3, S. SKAL
1, Y. KERROUM
1, R. SALGHI
4 , A. GUENBOUR
1 ,
A. GHANIMI1, A. BELLAOUCHOU
1, M. TABYAOUI
1
1Laboratory of material, nanotechnology and environment, Faculty of Science, M
ed V University, Rabat, Morocco.
2Laboratory of separation methods, Faculty of Science, Ibn Tofail University PO Box 242, Kenitra, Morocco.
3Department of Crop Science, College of Sanghur Life Science, Konkuk University, Seoul 05029, South Korea
4Laboratory of Applied Chemistry and Environment, ENSA, Ibn Zohr University, PO Box 1136, 80000 Agadir,
Morocco.
* Corresponding author: e-mail: [email protected]
ABSTRACT
Two new benzodiazepine derivatives namely, 1-ethyl-4-(2-oxopropylidene)-1,2,4,5-tetrahydro-
2H-1,5-benzodiazepine-2-one (BZD-1) and 1-octyl-4-(2-oxopropylidene)-1,2,4,5-tetrahydro-2H-
1,5-benzodiazepine-2-one (BZD-2) have been synthesized and used as corrosion inhibitors for
carbon steel in acidic solution (1 M HCl). Corrosion inhibition evaluation was performed using
weight loss, electrochemical techniques [potentiodynamic polarization (PDP) and
electrochemical impedance spectroscopy (EIS)], quantum chemical calculations, and molecular
dynamic (MD) simulations.
The results showed that both compounds are good corrosion inhibitors for carbon steel in 1 M
HCl medium; their inhibition efficiency increased with inhibitor concentration. In addition, the
results obtained from above methods reveal that BDZ-2 is an excellent inhibitor. It gives a
maximum inhibition efficiency of 96.63% at 10-3
M and inhibits corrosion by adsorbing at the
carbon steel surface. EIS measurements showed that the charge transfer resistance increases,
whereas the double-layer capacitance decreases with the inhibitor concentration. Polarization
studies showed that BDZ-1 and BDZ-2 are mixed type. The tested inhibitors have been adsorbed
on the carbon steel surface according to Langmuir isotherm adsorption model. The experimental
results are in reasonably close agreement with quantum chemical parameters calculated at
DFT/B3LYB/3-21G and the molecular dynamic simulations results.
Keywords: Corrosion; Inhibition; Carbon steel; EIS; DMol3; PDP.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
70
ID181
SEMICONDUCTOR PROPERTY OF AUSTENITIC STAINLESS STEEL IN
PHOSPHORIC ACID CONTAMINATED BY FLUORIDE IONS
Y. KERROUM*, S. SKAL, Y. EL AOUFIR, A. GUENBOUR, A. BELLAOUCHOU,
M. TABYAOUI, A. ZARROUK
Mohammed V University, Chemistry Department, United Nations Avenue, Agdal, Rabat Morocco B.P: 8007.N.U
* E-mail address: [email protected].
ABSTRACT
The semiconductor property of stainless steel has an important role in the corrosion resistance of
passive film. Moreover, the nature of the environment, such as the type of acid and the presence
of aggressive elements, can alter the semiconducting properties of stainless steel.
For that, the semiconductor investigation of austenitic stainless steel in phosphoric acid was
evaluated in the presence of the fluoride ions, to estimate its corrosion behavior. This research is
approved by the use of the Mott-Schottky analysis. The results revealed that the protection of the
material was provided by the formation of inner and outer layers in the case without fluoride ions,
instead in the presence of fluoride ions, the curves of the Mott-Schottky analysis exhibits that the
semiconductor of the barrier film consists of an n-type with increasing fluoride ions
concentration.
KeyWords: corrosion, phosphoric acid, stainless steels, fluoride ions, semiconductor film.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
71
ID184
SYNTHESE ELECTROCHIMIQUE D’UN NOUVEAU COMPOSE VITREUX :
APPLICATION EN TANT QU’INHIBITEUR DE CORROSION DE L’ACIER
ORDINAIRE EN MILIEU HCL 1M
H. EL BOULIFI1*
, M. OUAKKI1, H. BAREBITA
1, G. GHENIMI
1, T. GUEDIRA
1,
M. CHERKAOUI1
1Laboratoire matériaux, électrochimie et environnement à l’Université Ibn Tofail, Faculté des Sciences- BP 133,
14000 Kenitra maroc
* Adresse électronique : [email protected] ; Phone : (+212) 6 68 54 06 25
RESUME
L'effet inhibiteur d’une phase vitreuse à base de verre borate sur la corrosion du fer en milieu
HCl 1M a été étudié à l'aide des méthodes électrochimiques et gravimétriques. Les courbes de
polarisation indiquent que le composé est un inhibiteur cathodique. L’adsorption de ce compose à
la surface de l’acier suit l’isotherme du modèle de Langmuir, et la valeur obtenue de l’énergie
libre de Gibbs confirme que son mécanisme d’adsorption est du type physisorption. Les mesures
d’impédance électrochimiques confirment que la vitesse de corrosion diminue à mesure que la
concentration du composé atteint la valeur de 200 ppm.
Selon ce résultat, ce composé est prouvé efficace à limiter les dégâts de la corrosion avec un
acceptable rondement.
Mots-Clés : Corrosion, Polarisation, Impédance, Phase vitreuse, Acier, HCl.
Reference:
[1]. WanLin Wang, Michael L. Coorosion Science 46 (2004) 2601-2611;
[2]. Guedira, T. ,Contribution à l’identification des isothermes vers 820 °C des ternaires
MOX - Bi2O3- P2O5 ( M= Li, Ca, Ba, B, Sb, Zr, Sn, Nb, Ta ). Etude des phases, sillenite, fluorine et vitreuses.
Thèse de Doctorat D’Etat ES-Sciences. Université Ibn Tofail, Faculté des sciences, kenitra ( 2003) ;
[3]. A. Ait Aghzzaf, B. Rhouta, E.Rocca, A.khalil, J. Steinmetz. Coorosion Science 80 (2014) 46-52.
[4]. M. Belfaquir, T. Guedira, S. D. Elyoubi, J.L. Rehspringer Etude structurale des verres borate du système
ternaire Bi2O3- P2O5- B2O3, Sciences Lib Editions Mersenne ,volume5 ,N°130302(2013).
[5]. Badawy,W.,Al-Kharafi,F., El-Azab, A., 1999. Electrochemical behavior and corrosion inhibition of Al, Al-
6061 and Al–Cu inneutral aqueous solutions. Corros. Sci. 41, 709–727.
[6]. Elbadaoui, A., Galai, M., Cherkaoui, M., Guedira, T. Preparation and characterization of a vitreous phase and
application as a corrosion inhibitor in acidic medium, Der Pharma Chemica. 8(6), 2016, 214-221
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
72
ID186
INVESTIGATION OF THE CHEMICAL DURABILITY AND STRUCTURAL OF
NIOBIUM BISMUTH PHOSPHATE GLASSES
M. LAOURAYED1*
, M. EL MOUDANE1, M. BOUDALIA
1, M. KHACHANI
1, A. GUENBOUR
1,
A. BELLAOUCHOU1, A. GHANIMI
1, A. ZARROUK
1, M. TABYAOUI
1
1Laboratory of Materials, Nanotechnology and Environment, Faculty of Sciences, Mohammed V University Rabat,
Av. Ibn Battouta, BP 1014 Agdal-Rabat, Morocco
ABSTRACT:
In this work, glasses from the ternary system Bi2O3-P2O5-Nb2O5 were produced by standard
melting method. The chemical durability of these glasses was evaluated from the weight loss of
bulk samples immersed in three solutions with different initial pH. The changes in the pH values
of the corrosive solution as a function of the immersion time were used to investigate the
dissolution mechanism. The dissolution rate of the studied glasses is correlated with the structure
of the glasses analyzed by Raman spectroscopy. Indeed, the structural changes were studied by
the measurement of the density and the glass transition temperature Tg. The results obtained
show that the addition of Nb2O5 content clearly increases the chemical durability, due to the
replacement of easily hydrated P-O-P bonds by corrosion resistant Nb-O-P. Besides, the Raman
spectra shows that structural chains are broken into pyrophosphate groups and the P-O-P bonds
are depolymerized by the incorporation of distorded Nb(6) units through P-O-Nb bonds. These
results are in agreement with a narrower structure and act in such a way that Nb2O5 enters the
vitreous matrix as the previous character of the network.
Keywords: Phosphate; Oxide glasses; Glass transition temperature; Raman spectroscopy,
Chemical durability.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
73
ID187
CONTRIBUTION IN VALORIZATION OF Argania spinosa ON THE INDUSTRIAL
SCALE
H. LAAROUSSI1*
, A. AOUNITI 1, O. MOKHTARI
2, I. HAMDANI
1
1 Laboratory of Applied Analytical Chemistry, Materials and Environment (LC2AME), Faculty of Sciences Oujda,
Morocco
2 Laboratory of Water Sciences, Environment and Ecology (LS3E), Faculty of Science Oujda, Morocco
*e-mail: [email protected]
ABSTRACT
This work is a contribution to the valorization of Argania spinosa in the industrial level.
A comparison between the extraction methods used to extract argan oil has shown that these
methods have an influence on the extraction yield. Even roasting can change the quality of the
oil, its taste, its use and the rate of its extraction.
Using the weight loss measurement and electrochemical studies we evaluated the corrosion
inhibitory efficiency of mild steel in a 1M hydrochloric medium by three extracts of Argania
spinosa: artisanal oil, hexane extract from roasted almonds and the aqueous extract of argan
leaves.
The results found in this study show that the salt added during dough mixing increases the
inhibitory efficiency and that an increase in the inhibitors concentration causes an increase in the
efficiency and a decrease in the corrosion rate. The increase in temperature has the opposite
effect.
The study of the effect of temperature shows that the adsorption of the inhibitors on the surface of
mild steel is spontaneous and obeys to the Langmuir isotherm.
The results obtained by the electrochemical techniques justify the inhibitory effect of the three
extracts by the physisorption of an inhibitor layer on the mild steel surface and that these three
inhibitors are of mixed type.
In parallel with the anticorrosive study, we evaluated the antioxidant effect of three extracts of
Argania spinosa following the DPPH* radical trapping protocol.
Keywords: Argania spinosa, corrosion, mild steel, weight loss, electrochemical methods,
antioxidant effect.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
74
ID188
ELECTROCHEMICAL EVALUATION OF TWO ORGANIC COMPOUNDS AS
CORROSION INHIBITORS FOR MILD STEEL IN 1.0 M HCL
M. OUBAAQA1*
, M. OUAKKI2, I. CHAOUQUI
1, Z. ARIBOU
1, M. EBN TOUHAMI
1,*,
M. SFAIRA3
1. Laboratory of Materials Engineering and Environment: Modeling and Application, Faculty of Science, University
Ibn Tofaïl PB. 133-14000, Kénitra, Morocco
2. Laboratory of materials, electrochemistry and environment, Faculty of Science, University Ibn Tofaïl PB. 133-
14000, Kenitra, Morocco
3. Laboratoire d’Ingénierie des Matériaux, de Modélisation et d’Environnement, LIMME, Faculté des Sciences Dhar
El Mahraz, Université Sidi Mohamed Ben Abdellah, USMBA, BP 1796 – 30000, Atlas – Fès, Morocco.
*correspondant auteur E-mail:[email protected]
ABSTRACT
Mild steel has been extensively used in several industrial processes due to its distinctive
characteristics. However, it can unavoidably be corroded due to the harsh environment. Recently,
using organic corrosion inhibitors is the most effective and economical approach of all
anticorrosive methods.
The corrosion inhibition performances of two organic compound namely, Phenylalanine and
Aspartic acid for mild steel in 1.0 M HCl solution were studied by means of potentiodynamic
polarization and electrochemical impedance spectroscopy techniques. Data obtained from EIS
studies were analyzed to model the inhibition process through appropriate equivalent circuit
model. The results of the electrochemical methods showed that the studied molecules imparted
high resistance and acted as cathodic type inhibitors. Both thermodynamic and kinetic parameters
were calculated and discussed. The adsorption of the inhibitor molecules onto mild steel surface
was found to be chemisorption.
Keywords: Phenylalanine, Aspartic acid, EIS, corrosion, HCl.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
75
ID189
ADSORPTION AND CORROSION INHIBITION PROPERTIES OF 5-AMINO 1,3,4-
THIADIAZOLE-2-THIOL ON THE MILD STEEL IN HYDROCHLORIC ACID
MEDIUM: THERMODYNAMIC, SURFACE AND ELECTROCHEMICAL STUDIES
M. TOURABI1*
, M. BOUANIS1, I. NADI
1,A. O. NYASSI
1. BENALI
2, C. JAMA
3, A. ZARROUK
4,
F. BENTISS1,3
1Laboratory of Catalysis and Corrosion of Materials, Faculty of Sciences, ChouaibDoukkaliUniversity, PO Box 20,
M-24000 El Jadida, Morocco
2Department of Biology, Faculty of Sciences, University Dr Moulay Tahar, Saida, Algeria
3Univ. Lille, CNRS, INRA, ENSCL, UMR 8207, - UMET - Unit of Materials and Transformations, F-59000 Lille,
France
4LC2AME-URAC 18, Faculty of Science, First Mohammed University, PO Box 717, M-60000 Oujda, Morocco
ABSTRACT
The inhibition effect of 5-amino 1,3,4-thiadiazole-2-thiol (5-ATT) on the corrosion of
mildsteelin1 M HCl solution at 303 K was studied practicing weightloss, electrochemical
electrochemical (AC and DC) studies and X-ray photo electron spectroscopy (XPS) methods.
The obtained results showed that 5-ATT was an effective inhibitor in HCl medium. The
inhibition efficiency, η(%), increasedwith the increase in concentration inhibitor but the
temperature has almost no effect on the inhibition efficiency of 5-ATT. The activation dissolution
thermodynamicparameterswerecalculated and discussed. Thermodynamic data and XPS
analysisclearly show that the adsorption mechanism of 5-ATT on the mildsteelsurface in 1 M
HCl solution ismainlyelectrostatic-adsorption.Tafelcurvesrevealthat 5-ATT behaves as a mixed-
type inhibitorwithcathodicpredominance and obeyed Langmuir adsorption isotherm. With the
aim of extracting the parameters of the electrochemicalimpedancespectroscopy an
appropriateequivalent circuit model wasoffered.
Keywords:1,3,4-Thiadiazole; Mildsteel; HCl; AC impedance; XPS; Corrosion inhibition;
Adsorption.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
76
ID192
A STUDY OF ABRASION-CORROSION OF STAINLESS STEELS IN POLLUTED 40
WT.% PHOSPHORIC ACID
S. AFTIMI 1, A. GUENBOUR
1, A. BELLAOUCHOU
1, H. IDRISSI
2, R. BOULIF
3, N. SEMLAL
3
1 Laboratory of Materials, Nanotechnology & the Environment, University, Mohammed V, Faculty
of Sciences, Rabat, Morocco.
² Laboratory of Materials Science and Engineering, MATEIS, INSA Lyon, France.
3 R&D chimie -OCP- Morocco
ABSTRACT
Materials' wear is enhanced in phosphoric industries due to abrasion-corrosion phenomenon.
Stainless steels are highly used in different applications for their good properties, especially their
corrosion resistivity that depends on the passive layer formed on the surface of these alloys.
However, the combined action of electrochemical effect and mechanical impact leads to enhance
the total wear and to minimize the resistivity to wear of this kind of materials.
Our investigation is to study the electrochemical behavior of stainless steels in polluted
phosphoric acid without and with the presence of abrasives grit, also, to quantify the synergism
effect between corrosion and abrasion on the total mass loss of the material in these conditions.
For this aim electrochemical techniques, such as potentiodynamic and potentiostatic
electrochemical measurements, and electrochemical impedance spectroscopy, beside gravimetric
experiments, also a surface characterization based on MEB-EDX, were applied.
According to the experimental results, the electrochemical properties of a stainless alloy has
changed with the alteration of aggressiveness of the polluted 40 wt. % phosphoric acid due to the
addition of abrasion particles. The polarization resistance of the protective film is reduced while
the current density of passivation is increased with the presence of abrasives particles. The
gravimetric experiment and the MEB images confirm that the particles projection intensifies the
total wear rate. Which mean that the synergistic effect of abrasion and corrosion heighten the
total wear of stainless steels in40 wt.% polluted phosphoric acid.
Keywords: corrosion-abrasion; stainless steel; polluted phosphoric acid; MEB-EDX.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
77
ID193
EFFECT OF 1-(3-PHENOXYPROPYL) PYRIDAZIN-1-IUM BROMIDE ON STEEL
CORROSION INHIBITION IN ACIDIC MEDIUM
F. EL-HAJJAJI1*
, M. TALEB1, M.V. MARTINEZ DE YUSO
2, E. RODRIGUEZ-CASTELLON
3,
S. ALMUTAIRI 4, T. J. BANDOSZ
5, M. ALGARRA
6
1 Laboratory of Engineering, Electrochemistry Modeling and Environment Faculty of sciences, University Sidi Med
Ibn Abdallah, Fez, Morocco
2 X-Ray Photoelectron Spectroscopy Lab, Central Service to Support Research Building (SCAI), University of
Málaga, 29071 Málaga, Spain
3 Department of Inorganic Chemistry, Faculty of Science, University of Málaga, 29007 Málaga, Spain
4King Abdulaziz City for Science and Technology, Riyadh 11442, P. O. Box 6086, Saudi Arabia
5 Department of Chemistry and Biochemistry, The City College of New York, 160 Convent Ave, New York, NY
10031, USA
6 CQM-Centro de Química da Madeira, Universidade da Madeira, Campus da Penteada, 9020-105 Funchal, Portugal
* Corresponding author: [email protected]
ABSTRACT:
The effect of 1-(3-phenoxypropyl) pyridazin-1-ium bromide, a new pyridazinium derivative, on
steel corrosion in a HCl (1 M) solution was analyzed using electrochemical impedance and XPS
spectroscopy. Experimental results indicated that the inhibition efficiency increased with an
increase in an inhibitor concentration. Electrochemical impedance spectroscopy measurements
revealed that an increase in the immersion time of steel in an acidic medium from 1 to 12 h and
further to 24 h decreased the charge transfer resistance (Rct) and thus decreased the inhibition
efficiency. The SEM and XPS analyses linked the inhibition effect to the adsorption of the
inhibitor (1-(3-phenoxypropyl) pyridazin-1-ium bromide) on the steel surface [1].
Keywords: Corrosion inhibition, Steel, Surface adsorption, Charge transfer resistance
[1] Journal of Colloid and Interface Science 541 (2019) 418–424.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
78
ID194
EXPERIMENTAL, QUANTUM CHEMICAL, AND MONTE CARLO SIMULATION
STUDIES ON THE CORROSION INHIBITION OF MILD STEEL BY THREE NEW
SCHIFF BASE DERIVATIVES.
M. EL AZZOUZI1*
, A. AOUNITI1, F. ABRIGACH
1, A. DJEDOUANIC
2,3, F. BENHIBA
4, R.
TOUZANI1, I. WARAD
5, I.B. OBOT
6, A. ZARROUK
1, B. HAMMOUTI
1
1 LC2AME-URAC 18, Faculty of Science, First Mohammed University, PO Box 717, M-60 000 Oujda, Morocco.
2 Laboratoire de Physicochimie Analytique et Cristallochimie des Matériaux Organométalliques et Biomoléculaires,
Constantine.
3 Ecole Normale Supérieure de Constantine.
4 Laboratoire des procèdes de séparation, F.S. Université Ibn Tofail, Kenitra, BP 133, Kenitra, Morocco.
5 Department of Chemistry, AN-Najah National University PO Box 7, Nablus, Palestine.
6 Centre of Research Excellence in Corrosion, Research Institute, King Fahd University of Petroleum and Minerals,
Dhahran 31261, Saudi Arabia.
*Corresponding author: E-mail: [email protected]
ABSTRACT
Mild steel is the most extensively investigated metal for corrosion studies due of its wide
application in various corrosive media. For instance, in oil industries, aqueous acidic medium is
used for descaling, acid pickling, and acid treatment. Although, corrosion processes are
responsible for numerous losses mainly in the industrial scope. It is clear that the best way to
combat it is prevention. under those circumstances many studies were performed to prevent the
mild steel corrosion either by synthesis or natural compounds. The corrosion inhibition of newly
synthesized Schiff base derivatives (FMO), (FMM), and (FMP) was investigated for mild steel in
1.0 M HCl medium using weight loss, electrochemical (electrochemical impedance spectroscopy
and potentiodynamic polarization), and theoretical calculations. The inhibition effectiveness of
FMO, FMM, and FMP increased with increasing the concentration of the inhibitors and
decreased with the rise of temperature. Polarization studies showed that FMO, FMM, and FMP
inhibitors were of mixed type in nature. The results obtained from AC-impedance technique,
were analyzed to model the corrosion inhibition process through suitable equivalent circuit
model, where a constant phase element (CPE) has been used. FMO, FMM, and FMP were found
to obey Langmuir adsorption isotherm and Kinetic-Thermodynamic Model of El-Awady.
Quantum chemical calculations were used to provide molecular based explanations for the
inhibitive effects of FMO, FMM, and FMP inhibitors. The Monte Carlo simulation studies and
experimental results were in good agreement.
Keywords: Mild Steel, Corrosion Inhibition, Schiff Base Derivatives, Weight Loss,
Electrochemical Techniques, Monte Carlo Simulation.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
79
ID195
CHEMICAL INVESTIGATION OF AMINOPHOSPHONATES AS CORROSION
INHIBITORS FOR CARBON STEEL IN 1 M HCL
A.THOUME 1,2
, M. ZERTOUBI1*
, D. BENMESSAOUD LEFT1, A. ELMAKSSOUDI
2, , M.
DAKIR2, M. ZAHOUILY
3, M. AZZI
1.
1 Laboratoire Interface Matériaux Environnement (LIME), Université Hassan II de Casablanca, Faculté des Sciences
Ain Chock, Maroc.
2 Laboratoire de Synthèse Organique, Extraction et Valorisation (LSOEV), Université Hassan II de Casablanca,
Faculté des Sciences Ain Chock, Maroc.
3 Laboratoire de Catalyse, Chimiométrie et Environnement, URAC 24, Faculté des Sciences et Techniques
Mohammedia, Université Hassan II de Casablanca, Maroc.
* Corresponding author: [email protected]
ABSTRACT
The main problem of using iron alloys is their tendency to corrosion in contact with aggressive
medium such as hydrochloric acid solution, widely used in various industrial processes such as
oil well acidification, acid pickling, descaling and others. To solve the thorny issue, the acid
corrosion inhibitors are adopted to retard metal loss during contact with various acids in industry.
This practical and effective method is used to reduce the corrosive attack on metallic material.
Generally, organic compounds containing heteroatoms (N, O, S or P), π bond and aromatic rings
act as effective corrosion inhibitors. These organic molecules can impede the corrosion rate by
adsorbing on the metal surface and forming a protective film by adsorption (physical and/or
chemical adsorption).
This work describes the synthesis and assessment of the protective power of the
aminophosphonate family towards the corrosion of C45 steel in 1M HCl, using electrochemical
techniques such as: Polarization curves and electrochemical impedance spectroscopy. The results
indicate that the studied compound is an effective inhibitor with anodic type and its efficiency of
inhibition increases with concentration. The adsorption of the inhibitor on steel surface has
followed the adsorption isotherm of Temkin.
Keywords: corrosion; inhibition; aminophosphonate; HCl; steel
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
80
ID197
COMPARATIVE ANALYSIS FOR THE CORROSION SUSCEPTIBILITY OF COPPER
ALLOYS (GATE VALVES) USED AS A CONNECTION OF PVC'S CONDUITS IN
AGGRESSIVE SANDY SOIL
M.GALAI1, J.OUASSIR
1, A. CHEBABE
1, T. BELHAJ
2, H. BENQLILOU
2, M. EBN TOUHAMI
1
1. Laboratoire des Matériaux, Electrochimie et Environnement, Faculté des Sciences, Université Ibn Tofaïl, BP. 133
– 14000, Kénitra, Morocco.
2. International Institute for Water and Sanitation (IEA), National office of Electricity and the Potable Water, BP.
10220, Rabat, Morocco.
*Corresponding author: E-mail: [email protected]
ABSTRACT
Corrosion of copper alloys (copper, bronze and brass) in soil was evaluated at ambient
temperature using various methods such as electrochemical impedance spectroscopy (EIS),
polarization curves and Scanning Electron Microscopy (SEM) coupled with Energy Dispersive
Spectroscopy (EDS) microanalysis measurements.
Three equivalent circuits were separately used to interpret the obtained impedance spectra. The
EIS measurements indicated that the polarization resistance of all samples increased with
increasing immersion time. SEM showed the presence of three layers of corrosion products with
various composition and morphology covering each electrode. In addition, it was found that at
20% of moisture content the polarization resistanceRp values and the current density of all
electrodes in the studied soil gave the following order: copper>bronze> brass.
Good consistency between the data obtained from EIS and PP measurements was observed.
Keywords: corrosion, soil, copper alloys, electrochemical methods.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
81
ID197
INHIBITIVE PROPERTIES OF SODIUM GLUCONATEAND BIOCIDE (CTAB)
ON CORROSION, BIOCORROSIONAND SCALING CONTROLS OF COPPER IN
COOLING WATER SYSTEMS
L. ELHOUSNI1, N. DKHIRECHE
1, A. CHEBABE
1, M. EBN TOUHAMI
*1, M. SFAIRA
2, M.
GALAI1,R. TOUIR
1
1 Laboratoire des Matériaux, Electrochimie et Environnement, Faculté des Sciences, Université Ibn Tofaïl, BP. 133 –
14000, Kénitra, Morocco.
2 Laboratoire d’Ingénierie des Matériaux, de Modélisation et d’Environnement, LIMME, Faculté des Sciences Dhar
El Mahraz, Université Sidi Mohamed Ben Abdellah, USMBA, BP 1796 – 30000, Atlas – Fès, Morocco.
*Corresponding author: E-mail: [email protected]
ABSTRACT
The use of water as thermal fluid in cooling circuits usually leads to three phenomena namely:
corrosion, scaling and biological fouling, which constitute the origin of decrease in thermal and
electrical efficiencies of water circuits, a loss of metallic material as well as a proliferation of
microorganisms in the water circuits. In this study, the characterization of the studied water was
conducted and revealed that it was corrosive, scaly and seat of development of the
microorganisms. Then, researches of new formulations have been started in order to propose
effective solutions for protection of cooling circuits. First of all, the choice was made on sodium
gluconate (GS), combined with cetyltrimethyl ammonium bromide biocide (CTAB) used to fight
against the proliferation of microorganisms. The investigation ofresults obtained by using
electrochemical methodshas demonstrated that GS wasan efficient corrosion and scaling inhibitor
with efficiency close to 95% at 10-3
M. Also, the study has shown that CTAB acted as a mixed
type inhibitor with a good inhibitory efficiency of 86% at 15 ppm. In addition, the optimization
of GS and CTAB concentrations was carried out in order to find a formulation to prevent cooling
circuitsfrom the problems previously mentioned. The formulation found (10-3
M of SG + 15 ppm
of CTAB) had the better performance and had an efficiency of circa 89% which was improved
with the immersion time to reach 94% after 24 hours and kept its performance at higher
temperatures.
The Scanning Electron Microscopy (SEM, Energy dispersive X-ray (EDX) and X-ray Diffraction
(XRD) analysis haveshown that this formulation was an efficient inhibitor for corrosion, scaling
and biological fouling. These analyses confirm all results obtained by potentiodynamic
polarization curves and electrochemical impedance spectroscopy.
Keywords: cooling water system, copper, inhibition, corrosion, scaling, formulation,
Microbiology, sodium gluconate, biocide.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
82
ID200
IDENTIFICATION OF THE MATERIALMOSTLY CONCERNED BY THE
CORROSION PROBLEM IN THE AUTOMOTIVE INDUSTRY
A. CHAMI*, R. BENABBOU*, M. TALEB**, Z. RAIS**, M. EL HAJI*
*Laboratory Engineering Research-OSIL Team Optimization of Industrial and Logistics Systems, University Hassan
II, Casablanca-Morocco
**Laboratory of Chemistry of Condensed Matter (LCCM), University Sidi Mohammed Ben Abdallah, Faculty of
Sciences and Technology, Fez, Morocco
ABSTRACT
The study of corrosion is of paramount importance because of the direct and indirect losses
caused by this problem. It is a phenomenon thatcauses degradation of a material and changes in
its condition as due to a physical-chemical or biological interaction with its environment. It
affects metal materials used in many industrial fields such as automotive. Although the
automakers have done great strides in protecting the body and paint from this phenomenon
through surface treatment and material selection, cars remain exposed to corrosion. Depending on
atmospheric conditions and the environment, the materials are affected and lose the properties of
their uses.To this end, the automotive industry requires materials of high technical quality
andmeet demanding specifications. This work proposes to identify the materials most usedin the
automotivemanufacturing, their characteristics and the standard associated with their uses.These
materials must be aesthetic, dynamic, lightweight and durable. Currently, three materials are
mainly used in the automotive industry: steel, polymers and aluminium base alloys.
Our choice of material was based on steel, for reasons related to its low cost of production, its
superior strength propertiesthan other materials and its high rate of use in the car.
In order to meet all the requirements necessary for thecar manufacturing, several types of steels
are used according to their properties. Thus, the most exploited type of steel in the automotive
industry is "Steel for Stamping". It allows an easy formatting while guaranteeing the
characteristics required by the specifications: relatively low elastic stress, good fatigue
resistance,corrosion resistance, a thickness according to manufacturers’ specifications ranging
from 0.7 mm and 1.7 mm and a good absorption of kinetic energy. Research on international
standards has led us to conclude that the type of steel "stamping steel" meets the requirements of
the standardEN 10111: 2008, which is equivalent to international standards.
For this reason, our work on the corrosion problem will focus on stamping steel as basic
materials meeting the standard EN 10111:2008 in the automotive industry.
Keywords: Automotive industry – Steel – Corrosion – EN 10111:2008.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
83
ID266
IMPROVEMENT OF CORROSION RESISTANCE OF C-STEEL IN HYDROCHLORIC
ACID MEDIUM BY 2-MERCAPTOBENZIMIDAZOLE DIMER
M. BENIKEN1, M. DRIOUCH
1, W. NIOURI
1, Z. BENSOUDA
1, EL H. EL ASSIRI
1, M. SFAIRA
1,
M. EBN TOUHAMI2, A. MOUSSAIF
3
1 Laboratoire d’Ingénierie des Matériaux, de Modélisation et d’Environnement, LIMME, Faculté des Sciences Dhar
El Mahraz, Université Sidi Mohammed Ben Abdellah, USMBA, BP 1796 – 30000, Atlas – Fès, Morocco.
2 Laboratoire des Matériaux, Electrochimie et Environnement, Faculté des Sciences, Université Ibn Tofaïl, BP. 133 –
14000, Kénitra, Morocco.
3 Centre National de l'Energie, des Sciences et des Techniques Nucléaires (CNESTEN)
* Corresponding author: [email protected]
ABSTRACT
Corrosion inhibition of C-steel in 1.0 M HCl solution at 308 K by 2-(1H-benzimidazol-2-
yldisulfanyl)-1H-benzimidazole (BI-S-S-BI) derived from 2-mercaptobenzimidazole, has been
studied by means of potentiodynamic polarization (PP) and electrochemical impedance
spectroscopy (EIS). The PP results were exploited using a series of methods derived from
potentiodynamic polarization curves such as potentiodynamic Tafel, Linear Polarization
Resistance (LPR) established by Stern and Geary as well as a fitting by the Stern equation. A
very good concordance was obtained from the three techniques and has shown that BI-S-S-BI
revealed a good corrosion inhibition and that the inhibition efficiency increased with the inhibitor
concentration. PP suggested that BI-S-S-BI was a mixed type of inhibitor. The description of EIS
is given in precise way beginning from the theoretical basics of EIS and data interpretation in the
frames of various equivalent electric circuits. Two time constants determined by the charge-
transfer and the adsorption of the inhibitor, respectively, can be outlined. The adsorption of BI-S-
S-BI on the C-steel surface, in 1.0 M HCl solution, obeyed to the adsorption isotherms
corresponding to Langmuir, El‒Awady, Flory‒Huggins as well as Temkin based on the highest
value of linear regression coefficient.
Keywords : 2-(1H-benzimidazol-2-yldisulfanyl)-1H-benzimidazole, Acid corrosion, Tafel-curve
fitting, Linear polarization resistance, Stern-equation fitting, EIS, Adsorption isotherms
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
84
ID266
CHARACTERIZATION OF ADSORPTION PROPERTIES OF A POLYACRYLAMIDE
ON CORROSION INHIBITION FOR C‒STEEL IN 1.0 M HCL MEDIUM THROUGH
CONFRONTATION OF SIX ADSORPTION ISOTHERMS AND THREE METHODS
M. BENIKEN1, M. DRIOUCH
1, M. SFAIRA
1, B. HAMMOUTI
2, M. EBN TOUHAMI
3,
M. MOHSIN4
1 Laboratoire d’Ingénierie des Matériaux, de Modélisation et d’Environnement, LIMME, Faculté des Sciences Dhar
El Mahraz, Université Sidi Mohammed Ben Abdellah, USMBA, BP 1796 – 30000,
Atlas – Fès, Morocco.
2 LCAE-URAC18, Faculté des Sciences, Université Mohammed Premier, BP 717 – 60000, Oujda, Morocco.
3 Laboratoire des Matériaux, Electrochimie et Environnement, Faculté des Sciences, Université Ibn Tofaïl, BP. 133 –
14000, Kénitra, Morocco.
4 Department of Chemistry, University of Sharjah, Sharjah, P.O. Box 27272, United Arab Emirates.
* Corresponding author: [email protected]
ABSTRACT
The adsorption properties of a polyacrylamide PA on corrosion inhibition of in 1.0 M HCl
solution were analyzed by means of potentiodynamic polarization (PP) and electrochemical
impedance spectroscopy (EIS) techniques. The adsorption data were modeled using six linearized
forms of adsorption isotherms corresponding to Langmuir, Flory‒Huggins, Temkin, Frumkin,
Freundlich as well as the kinetic‒thermodynamic model of El‒Awady. The Langmuir model was
first ruled out notwithstanding the highest value of linear regression coefficient and a slope close
to unity. Secondly, it was found, according to both El‒Awady and Flory‒Huggins models, that
exactly three molecules of water were replaced by one PA molecule. Thirdly, it was shown the
presence of repulsive lateral interactions in the adsorbed inhibitory layer confirmed by the
negative sign of the interaction parameters of Temkin and Frumkin isotherms.
The thermodynamic parameters (Kads, ∆rG°ads) showed that the adsorption of PA molecules onto
C‒steel surface involved both chemical and physical adsorption but predominantly
chemisorption.
Keywords : Polyacrylamide, Adsorption, isotherms, Lateral interactions, Immersion time.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
85
ID268
ANTICORROSION PERFORMANCE OF2-(PROP‐2‐YN‐1‐YLSULFANYL)
‐1H‐1,3‐BENZODIAZOLE IN MOLAR HYDROCHLORIC ACID
M. DRIOUCH 1*, N. ACHNINE
1, E. EL ASSIRI
1, M. BENIKEN
1, S. AOURABI
1, M. KADIRI
1, M.
SFAIRA1, M. BENZAKOUR
1, M. EBN TOUHAMI
2
1 Laboratoire d’Ingénierie des Matériaux, de Modélisation et d’Environnement (LIMME),
Faculté des Sciences, Université Sidi Mohammed Ben Abdellah, USMBA, B.P. 1796–30000, Atlas – Fès, Morocco.
2 Laboratoire d’Ingénierie des Matériaux et Environnement : Modélisation et Application
(LIMEMA), Faculté des Sciences, Université Ibn Tofaïl, B.P. 133–14000, Kénitra, Morocco.
* Corresponding author: [email protected]
ABSTRACT
The efficiency of P2YSB was evaluated, on the basis of concentration, for corrosion inhibition of
mild steel in 1 M HCl by means of potentiodynamic polarization PP fitted with Tafel, Stern,
Stern & Geary and Jena & Bvr. methods [1] as well as EIS measurements. The EIS data were
analyzed to model the inhibition process by an appropriate equivalent circuit model, in order to
understand the mechanism of the electrochemical process that takes place at the electrode /
solution interface and to differentiate the different elementary steps referring to their relaxation
time. The obtained results showed that P2YSB revealed a good corrosion inhibition which
increased with the inhibitor concentration reaching circa 95 % at 10-3
M of P2YSB.
Potentiodynamic polarisation revealed the mixed type character of this organic compound. The
Nyquist and Bode diagrams indicated that the diagrams corresponding to the high concentrations
highlighted two time constants; the first capacitive semicircle observed at high frequency could
be attributed to a charge transfer process and the neighbouring second semicircle to the
inhibitor’s adsorption onto the metal surface. The adsorption data fitted well to Langmuir, El-
Awady, Frumkin and Temkin. A discussion of the treatment results of each model was given.
The thermodynamic parameters and the intrinsic properties of P2YSB(protonation: (pKa,
isoelectric point), Charge, polarizability, and of the metal (PZN) converged to a double character
of the adsorption process though predominantly chemical. The scanning electron microscopy
testified the formation of a protective film over the surface.
Figure :structure of The 2- (prop‐2‐yn‐1‐ylsulfanyl)‐1H‐1,3‐benzodiazole
Keywords: Benzimidazole, Mild steel, Acid corrosion, Corrosion Inhibition.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
86
ID268
COMPUTATIONAL STUDY AND QSPR APPROACH ON THE RELATIONSHIP
BETWEEN CORROSION INHIBITION EFFICIENCY AND MOLECULAR
ELECTRONIC PROPERTIES OF SOME BENZODIAZEPINE DERIVATIVES ON C-
STEEL SURFACE
M. DRIOUCH1,*, EL H. EL ASSIRI
1, Z. BENSOUDA
1, M. BENIKEN
1, A. EL HALOUI
1,
M. SFAIRA1, T. SAFFAJ
2
1Laboratory of Materials Engineering, Modeling and Environment, LIMME, Faculty of Sciences Dhar El Mahraz,
Sidi Mohamed Ben Abdellah University, USMBA, Po. Box 1796 Atlas Fez, Morocco.
2Laboratory of Application Organic Chemistry, Faculty of Sciences and Techniques, Sidi Mohamed Ben Abdellah
University, USMBA, BP 2626 route d’Immouzer-Fez, Morocco.
E-Mail :[email protected]
ABSTRACT
The Density Functional Theory (DFT) study was used to investigate the corrosion inhibition
performance of four inhibitors namely: 2,3-dihydro-1H-pyrrolo[2,1c] [1,4] benzodiazepine-
5,11(10H,11aH) -dione (BZD1); 2,3-dihydro-1 H-pyrrolo [2,1c] [1,4] benzodiazepine -5,11
(10H,11aH) -dithione (BZD2); 10-benzyl-pyrrolo [2,1-c][1,4] benzodiazepine -5,11- dione
(BZD=2O) and 10-benzyl-pyrrolo [2,1-c][1,4] benzodiazepine-5,11-dithione (BZD=2S) on
carbon steel using the B3LYP/6-311G(d, p) level of theory. The geometry optimization was
conducted only on the neutral form of all benzodiazepine derivatives, without any protonated
form as testified by the Marvin software. The most relevant quantum chemical parameters
according to their potential action as corrosion inhibitors were calculated.The descriptors
considered were: the EHOMO (highest occupied molecular orbital energy), the ELUMO (lowest
unoccupied molecular orbital energy), the energy gap (∆E), the dipole moment (µ), the hardness
(η), the softness (σ), the absolute electronegativity (χ), the total energy (Etot), the ionization
potential (IP), the electron affinity (EA)and the fraction of electrons transferred (∆N). Besides,
the local reactivity was analyzed through the Fukui function in order to compare the possible
sites for nucleophilic and electrophilic attacks. The electronic properties of these
inhibitorsobtained by DFT were correlated with their experimental efficiencies using two
mathematical models, based-QSPR approaches; the multiple linear regression (MLR) and the
multiple polynomial regression (MPR).The quantum chemical study showed that the theoretical
and experimental results were in good agreement, and the statistical results revealed that the MPR
was the most relevant and predictive model in comparison with the MLR model, with a very high
determination coefficient (R2
= 0.99), adjusted determination coefficient (R2
adj = 0.99) and
predicted determination coefficient (R2
pred = 0.97).
Keywords-Corrosion inhibition,Benzodiazepine,C-steel, DFT at B3LYP/6-31G**, QSPR
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
87
ID270
Anethum graveolens ESSENTIAL OIL AS A GREEN CORROSION INHIBITOR FOR
STEEL C38 IN HYDROCHLORIC ACID: CORRELATION BETWEEN INHIBITIVE
EFFECT AND ELECTRONIC PROPERTIES OF EXTRACT MAJOR CONSTITUENTS
USING DENSITY FUNCTIONAL THEORY
M. ZNINI1*
, M. MANSSOURI1, A. ANSARI
1, O. SENHAJI
3, J. COSTA
2, J. PAOLINI
2
1 Université My Ismail, Laboratoire des Substances Naturelles & Synthèse et Dynamique Moléculaire, Faculté des
Sciences et Techniques, BP 509, 52003, Errachidia, Morocco.
2 Université de Corse, CNRS-UMR 6134, Laboratoire de Chimie des Produits Naturels, BP 52, 20250 Corti, France.
3 Laboratory of Applied Physical Chemistry, Moulay Ismaïl University, Faculty of Sciences and Technology of
Errachidia, Morocco.
* Corresponding author: E-mail: [email protected]
ABSTRACT
The essential oil from the seeds of Anethum graveolens (dill) was studied by Gas
Chromatography (GC) and Gas Chromatography-Mass Spectrometry (GC/MS). 12 components
were identified accounting 98% of the total oil, which carvone (43.5%), dill-apiol (26.7%) and
limonene (15.4%) were the major compounds. The inhibition of steel C38 in 1 M HCl by
essential oil of A. graveolens was investigated using the gravimetric technique at 298-338 K. The
trend of inhibition efficiency with temperature was used to propose the mechanism of inhibition.
It was found that the A. graveolens essential oil acts as an inhibitor for acid-induced corrosion of
steel C38. Inhibition efficiency (Ew%) of the essential oil increased with an increase in
concentration of the A. graveolens essential oil but decreased with temperature. Inhibitor
adsorption characteristics were approximated by Langmuir adsorption isotherm at all the
concentrations and temperatures studied. The mechanism of physical adsorption is proposed from
the trend of inhibition efficiency with temperature and from the calculated values of Gibbs free
energy, activation energy and heat of adsorption. Quantum chemical calculations were performed
using the density functional theory at B3LYP/6-31G (d,p) level of theory to find out whether a
clear link exists between the inhibitive effect of the extract and the electronic properties of its
main constituents.
Keywords: Anethum graveolens, Essential oil, Steel C38, Corrosion inhibition, Density
functional theory.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
88
ID290
ELECTROCHEMICAL INVESTIGATION ON THE CORROSION INHIBITION OF
IRON STEEL BAY MINERAL DERIVATIVE IN HYDROLIC ACID SOLUTION
M. YAMNI1, M. AKOUBAA
2, K. ISMAILY ALAOUI
1, M. DRIOUCH
3, R. OUARSAL
2, Z. RAIS
1,
M. LACHKAR2, M. TALEB
1
1Laboratory of Ingenierie Electrochemical, Modelisation and Envinnemental (LIEME.)
Faculty of Sceinces, University Sidi Mohamed Benabdallah, Po. Box (Atlas), 300 Fez, Morocco.
2 Engenieering Laboratory of Organometallic and Molecular Materials (CNRST. URAC. 19.)
Faculty of Sceinces, University Sidi Mohamed Benabdallah, Po. Box (Atlas), 300 Fez, Morocco.
1Laboratory of Materials Engineering, Modelisatio and Environment (LIMME.)
Faculty of Sceinces, University Sidi Mohamed Benabdallah, Po. Box (Atlas), 300 Fez, Morocco.
ABSTRACT
Corrosion inhibition of mild steel mainly in acidic media is one of the most importants subjects
of current research in different industries. Acidic environments, especially hydrochloric acid
solutions (HCl), are widely used in various industrial processes, such as oil well acidification,
acid pickling, acid cleaning, and acid descaling, which generally leads to serious metallic
corrosion.
This study aims to investigate the inhibition ability of a Mineral derivative towards mild steel
corrosion in HCl (1M) using weight loss mesuarments, potentiodynamic polarization (PP) and
elechtrochemical impedence spectroscopy (EIS) techniques.
The experimental results obtaind revealed that this compound perform excellently as corrosion
inhibithor. It was shown that the inhibition efficiency increased with the concentration of
inhibithors and achieved up to 90% at concentration of 5.10-5
M.
Keywed : Corrosion, Mineral derivative, Potentiodynamic polarization, Adsorption.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
89
ID294
ADSORPTION AND THERMODYNAMICS STUDY OF THE INHIBITION OF
CORROSION OF AINSI 316L STAINLESS STEEL IN HCL MEDIUM USING
CARBOXYLIC ACIDS
M. ALAHIANE, Y.AIT ALBRIMI, A. AIT ADDI, R. AIT AKBOUR, J. DOUCH, A. ASSABBANE,
M. HAMDANI
Laboratory of Electrochemistry, Catalysis and Environment
Faculty of Science, Ibn Zohr University, Agadir
*Corresponding: [email protected]
ABSTRACT
AISI 316 Austenitic stainless steels (SS) are extensively used in nuclear reactors, biomedical
implants, as well as in components for chemical and food industries. They are the most popular
materials used in various applications due to their excellent corrosion resistance and good
mechanical properties [1].
In this work, adsorption and thermodynamics studies of stainless steel corrosion inhibition in HCl
medium using carboxylic acids were carried out. The inhibitive and adsorptive properties of
carboxylic acids for the corrosion of Stainless steel in 0.5 M HCl solutions was investigated using
weight loss (WL) at 291 to 318 K, open circuit potential (OCP), potentiodynamic polarization
method, electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM)
analysis. The result has proved that carboxylic acids are good inhibitors of SS corrosion in HCl.
The Inhibition efficiency of inhibitors decreased as temperature and time of immersion increased
but increased with increase in concentration of carboxylic acids. The fundamental
thermodynamic functions were used to evaluate important inhibitive properties of carboxylic
acids. Data were examined by fitting to several adsorption isotherms including Langmuir,
Langmuir modified, EL-Awwadi, Temkin, Freundlich. The R2 values of 0.997 and 0.965 indicate
strong adherence to Langmuir adsorption isotherm.
Keywords: Adsorption; Corrosion; AISI 316 Stainless steel; Inhibition; Carboxylic acids.
Reference:
[1] B. A. Obadele, A. Andrews, M. B. Shongwe, P. A. Olubambi « Tribocorrosion behaviours of AISI 310 and AISI
316 austenitic stainless steels in 3.5% NaCl solution », J. Materials Chemistry and Physics 171 (2016) 239-246.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
90
COMMUNICATIONS
ORALES Thèmes 2
Chimie Analytique et
Environnement
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
91
ID178
CATALYTIC WET OXIDATION OF ORGANIC RECALCITRANT WATER
POLLUTANT USING LOCAL PILLARED CLAY CATALYSTS
F. BARAGH1, 2
*, K. DRAOUI 3, B. EL BALI
2, M. AGUNAOU
1, A. KHERBECHE
2
1 Laboratory of coordination and analytical chemistry (LCCA), Faculty of Science, Chouaib Doukkali University,
Route Ben Maachou, 24000, El Jadida, Morocco
2Laboratory of Catalysis, Materials and Environment (LCME), Higher school of technology (EST), Sidi Mohamed
Ben Abdellah University, Fez, Morocco
3Materials and interfacial systems laboratory (MSI), Faculty of Sciences, Abdel Malek Essaadi University, Tetouan,
Morocco
*Corresponding author E-mail: [email protected]
ABSTRACT
In this millennium Morocco is facing a real water stress and is threatened by extreme water
shortage by 2040. Water pollution by discharges of organic compounds, represents currently a
major problem especially in the North Africa region with the persistent increase in wastewater
volumes and the complexity of hazardous industrial wastes evacuated into the ecosystem with
minimal or no treatment. Thus efforts must be made to fight against pollution and preserving
water resources.
Organic non-biodegradable pollutants have increasingly become a serious environmental issue
and a real challenge for industries and thus disposing safely these compounds is becoming a
necessity and an important area of research. Among other wastewater treatment methods
(chemical, biological and physical treatments), catalytic wet peroxide oxidation (CWPO) has
attracted considerable attention. The main objective of this work is to study the CWPO of organic
recalcitrant water pollutants from aqueous solutions, using pillared Moroccan clay (PILC).
Keywords: organic recalcitrant pollutants; clays; pillared clay catalysts; catalytic wet peroxide
oxidation.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
92
ID201
SEWAGE SLUDGE ASHES IN CONCRETES: MECHANICAL PROPERTIES AND
DURABILITY
S. NAAMANE1*, F.Z. BOUAICH
1, N.H. MTARFI
1, Z. RAIS
1, N. ABRIAK
2, M. BEN ZARZOUR
2,
W. MAHERZI2, M. TALEB
1
1-Laboratoire d’Ingénierie d’Electrochimie, de Modélisation et d’Environnement, Faculté des sciences Dhar El
Mehraz, B.P. 1796, 30000 Atlas Fès, Maroc.
2-Institut Mines Telecom, LGCgE-GCE, 941 rue Charles Bourseul, 59500 Douai, France
* Corresponding author email: [email protected]
ABSTRACT
The management of sewage sludge has become an expensive and environmentally sensitive
problem, since enormous quantities of this waste are produced each year requiring an adequate
disposal method. Recently, the use of this residue, after treatment, in construction materials has
become a growing option and an attractive disposal method of sewage sludge, because of its
technical, economical and environmental benefits.
The objective of the present work is to evaluate the influence of the incinerated residue of sewage
sludge (SSA) on the durability of concrete mixtures. The sewage sludge ash was characterized
chemically, physically and miner logically. In addition, the mechanical properties of SSA-
concretes emerged in four different solutions (water and solutions containing 5% of salt, sulfuric
acid and nitric acid) were also investigated and compared to the control concretes. Results show
that the presence of SSA in concrete enhance its durability in aggressive environment compared
to ordinary Portland cement.
Key words: Sewage sludge ash; Cement; Concrete; Physico-chemical characterization,
compressive strengths; durability.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
93
ID202
EVALUATION DE LA BIOTRANSFORMATION DE LA MATIÈRE ORGANIQUE
LORS DU PROCESSUS DE CO-COMPOSTAGE DES DÉCHETS OLÉICOLES PAR
ANALYSES PHYSICO-CHIMIQUES, SPECTROSCOPIQUES ET TESTS DE
PHYTOTOXICITÉ
Z. MAJBAR 1*
, K. LAHLOU 1, M. BEN ABBOU
2, H. BOUKA
2, M. NAWDALI
3, M. EL HAJI
4,
M. TALEB1, Z. RAIS
1
1Laboratoire d’Ingénierie d’Electrochimie, de Modélisation et d’Environnement (LIEME), FSDM, USMBA-Fès.
2Laboratoire Ressources Naturelles et Environnement, Faculté Poly Disciplinaire de Taza, USMBA-Fès, USMBA.
3Laboratoire de Chimie de la Matière Condensée (LCMC), Faculté des Sciences et Techniques, USMBA, Fès.
4Laboratoire Management Industriel, Energétique et Technologie des Matériaux Plastiques et Composites, ENSEM-
Casablanca
*Email : [email protected]
RÉSUMÉ
Les déchets oléicoles, constituent le problème majeur des unités de trituration d’olives. Leur rejet sans
aucun traitement engendre de sérieux problèmes environnementaux dus principalement à leur forte charge
en composés phénoliques. Le co-compostage de ces déchets représente une alternative efficace et
prometteuse pour limiter leurs risques environnementaux. Ce processus permet la biotransformation de la
matière organique instable en un produit stable, riche en éléments fertilisants nutritifs assurant une fertilité
aux sols agricoles et stimulant la croissance des plantes. Dans ce contexte, trois composts ont été élaboré
par co-compostage des déchets oléicoles particulièrement les margines et les pâtes de margines avec les
sous-produits vinicoles et les déchets verts. L’objectif de cette étude est d’une part dévaluer le processus
de biotransformation de la matière par analyses physico-chimiques et spectroscopiques associées au test
de phytotoxicité (indice de germination). Et d'autre part, de définir les interactions entre les différents
paramètres physicochimiques par analyse de corrélation et en composantes principales.
Les résultats montrent l'efficacité du processus du co-compostage pour la réduction de la toxicité des
déchets oléicoles. Le taux de dégradation de la matière organique dépasse les 40 % et la teneur en
composés phénoliques est réduite à environ 60 %, pour les trois composts, à la fin de processus qui a duré
environ 2 mois. Les valeurs des indices de germination des trois composts confirment leur maturité. Les
composts ainsi produits répondent favorablement à la norme française d’amendement organique NFU44-
051. De plus, les analyses spectroscopiques confirment la biodégradation de la matière organique et la
biosynthèse des substances humiques. Les analyses de corrélation et en composantes principales (ACP)
enregistrent une forte corrélation entre la dégradation de la matière organique, les composés phénoliques
et le rapport C/N. Leur contrôle au cours du processus de co-compostage des sous-produits oléicoles
s’avère indispensable.
Mots-clés: Déchets oléicoles, Analyses spectroscopiques, Analyse physico-chimiques, Bio-
transformation, Indice de germination, Analyses en composantes principales (ACP).
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
94
ID203
ADSORPTION DESORPTION DU COLORANT BM EN REGIME DYNAMIQUE SUR
UNE ARGILE NATURELLE, VALORISATION DE LA POUDRE RESULTANTE
A. K. BENNANI A,b*
, B. MOUNIR a, M. HACHKAR
A, M. BAKASSE
C, A. YAACOUBI
B, Z. RAIS
D.
a Equipe de recherche Analyse, Contrôle et Environnement, Ecole Supérieure de Technologie, Université Cadi
Ayyad, BP 89, Safi, Maroc
b Equipe Environnement et Méthodologie Expérimentale, Laboratoire de Chimie Organique Appliquée, Faculté des
Sciences Semlalia, BP 2390, Marrakech, Maroc
c Equipe d’Analyse des Micro-Polluants Organiques, Faculté des Sciences, Université ChouaibDoukkali, BP 20, El
jadida, Marocd
dÉquipe effluents industriels: caractérisation et traitement, Laboratoire d'ingénierie d'électrochimie, de modélisation
et d'environnement LIEME-FSDM-FÈS
RÉSUMÉ
La pollution des eaux et sols par certains produits chimique d’origine industrielle tel que les
colorants, constitut une source de dégradation de l’environnement [1] et suscite, à l’heure actuelle
un interet particulier à l’echelleinternationale. Le traitement (recyclage de l'eau et des sels
minéraux) des effluents de teinture de l'industrie textile ainsi que la valorisation de la poudre
(adsorbant- adsorbat) résultante constituent un enjeu économique et environnemental majeur.
L’adsorption dynamique du bleu de méthylène : colorant azoïque, couramment utilisé dans la
teinture du coton, du bois et de la soie, pouvant provoquer des brûlures oculaires responsables de
blessures permanentes aux yeux de l'homme et des animaux [2] sur une argile naturelle(mélangée
avec le sable afin d’éviter le colmatage) en utilisant une colonne d’adsorption a été étudiée dans
le but d’évaluer l’abattement de la couleur del’effluent coloré.Les courbes de percée dynamiques
ont été tracées en faisant varier la hauteur du lit (15, 20, 25 et 30 cm), le débit d'écoulement (4,
8,5 et 12 mL / min) et les concentrations d'alimentation (160, 210 et 260 mg / L). Les résultats
ont montré que l’adsorption dépend de la concentration initiale en colorant, du débit et de la
hauteur du lit d’adsorbant. la désorption en présence de l’eau ultrapure puis le NaCL a été
réalisée aussi, Les résultats ont montré quele pourcentage de désorption ducolorant BM sur le
mélange sable et argile est d’environ 10 % en présence de l’eau ultrapure ; 7% supplémentaire a
été désorbée en présence de NaCl ;Le pourcentage de désorption résultant de l’argile uniquement
(exempte de sable) est ≤ 10%, Ce qui laisse penser que la nature des liaisons entre le BM est en
grande partie de nature chimique. La valorisation de la poudre adsorbat- adsorbant a été réalisée
en mélangeant toutes les poudres des essais de désorption résultantes, un pot de décoration en a
été produit.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
95
ID205
CHEMICAL CHARACTERIZATION AND RADICAL SCAVENGING CAPACITY OF
ROSEMARY’S EXTRACTS IN THE EASTERN REGION OF MOROCCO
M. SABBAHI*1, A. TAHANI
1, A. EL BACHIRI
1
1 Laboratory of Physical Chemistry of the Natural Resources and Environment, University Mohammed Premier, BP
717, 60000, Oujda, Morocco
* E-mail of the corresponding author: [email protected]
ABSTRACT
In order to study the chemical variability of rosemary and how it relates to their antioxidant
activity, six samples of leaves of rosemary harvested from different locations in the Eastern
region of Morocco at the blooming stage. The essential oils extracted with hydrodistillation were
analyzed by GC-MS, while the methanolic extracts obtained with Soxhlet apparatus were
analyzed with HPLC. Their radical scavenging capacities were studied by the DPPH assay. The
total phenol and flavonoids assays were carried out on the methanolic extracts. Rosemary’s
essential oil yielded from 0.6 to 2.42 %. The major constituent, for all the samples, is 1.8-cineole
(46.51 to 61.73 %) and the highest contents are registered in Lamrija of Talsint. Secondly, we
find camphor (11.47 to 19.28 %). Other compounds such as camphene and α-pinene have less
concentration. The studied rosemary’s essential oils are dominated by the monoterpenes
oxygenated (71.83 to 79.42%), followed by the monoterpenes hydrocarbons (19.11 to 26.55%).
In term of methanolic extracts, HPLC revealed that the amounts of rosmarinic acid, the major
component, and cafeic acid, varied within the different geographical regions of growth. However,
we note the absence of carnosol and carnosic acid. The highest level of the rosmarinic was in Jbel
Skendis (6.27 mg/ml) while the lowest concentration was registered in El Ayat (4.21 mg/ml).
Meanwhile, the concentration of cafeic acid doesn’t exceed 0.07 mg/ml. With respect to the
location, plants harvested from the El Ayat and El Aouinet have lower total phenol content
(respectively, 112.46 and 112.93 mg eqAG/g dry matter) than those harvested from Jbel Skendis
and Lamrija of Talsint) that have the highest content (respectively 127.13 and 120.73 mg eqAG/g
dry matter). Concerning the total flavonoids, the values registered vary from 34.29 to 40.63 mg
eqQ/g dry matter. In general, all the studied extracts showed high capacity in terms of
neutralizing free radicals. Furthermore, we report that Radical Scavenging Capacity of the
essential oil is in line with the concentration of monoterpenes hydrocarbons. On the other hand,
the resulting values for the methanolic extracts were correlated with the rosmarinic concentration
and the total phenol contents of the extracts.
Keywords: Rosemary, Antioxydant activity, Radical scavenging, Rosemarinic Acid, 1.8 Cineole.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
96
ID206
EVALUATION DE LA QUALITE DES EAUX DE SURFACE DE LA VILLE DE FES
PAR L'APPROCHE SEQ-SIG
FZ. EL MADANI*1, N. IDRISSI
1, N. ELALLAOUI
1, K. LAHLOU
1, A. OMOR
1, M. BENABBOU
2,
M. MERZOUKI3, M. TALEB
1, Z. RAIS
1
1 Laboratoire d’Ingénierie d’Electrochimie, de Modélisation et d’Environnement (LIEME), Faculté des Sciences
Dhar El Mahraz-Fès, Université Sidi Mohamed Ben Abdellah-Fès
2 Laboratoire de Ressources Naturelles et Environnement, Faculté Poly Disciplinaire-Taza, Université Sidi Mohamed
Ben Abdellah-Fès
3 Laboratoire de Biotechnologie, Faculté des Sciences Dhar El Mahraz-Fès, Université Sidi Mohamed Ben
Abdellah-Fès
RESUME
La ville de Fès connait une dynamique industrielle, artisanale et agricole importante avec une
large utilisation des produits chimiques toxiques dont une partie se trouve véhiculée par l’eau
dans les oueds avoisinants ou infiltrée par le sol dans la nappe phréatique. Ceci menace de
manière alarmante l’environnement et l’homme.
L’objectif de cette étude est, d’une part, identifier les zones les plus altérées par les industries
estimées polluantes de la ville de Fès; et d’autre part, étudier leur impact sur la qualité des eaux
de surface de la ville de Fès. De ce fait, nous avons réalisé un diagnostic approfondi sur les
activités de toutes les zones industrielles de la ville qui nous a permis de relever 5 points de
prélèvements des eaux les plus sensibles. La qualité de ces eaux a été évaluée par un suivi spatio-
temporel pendant 3 mois de l’année 2017 par le couplage des techniques du Système Evaluation
Qualité (SEQ) et Système d'Information Géographique (SIG) (SEQ-SIG).
Les résultats révèlent que les activités industrielles ou anthropiques des zones étudiées sont
variables et différentes. Les oueds traversant ces zones se caractérisent par de fortes charges
organique, minérale, métallique et une contamination fécale et c'est l’aval d’oued Fès qui
présente une qualité mauvaise à plus mauvaise.
Mots clés : Pollution, Eaux de surfaces, Diagnostic, Caractérisation, Approche SEQ-SIG.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
97
ID207
ACQUIS DE RECHERCHE SCIENTIFIQUE SUR LE TRAITEMENT OU LA
VALORISATION DES DECHETS OLEICOLES
R. MAHMOUD1*
, Z. MAJBAR1, K. LAHLOU
1, M. BENABBOU
2, M. ELHAJI
3, M. TALEB
1 ,
Z. RAIS 1
1Laboratoire d'Ingénierie d’Electrochimie, Modélisation et d’Environnement (LIEME), Faculté des Sciences
Dhar El Mahrez-FSDM /Université Sidi Mohammed Ben Abdellah-USMBA, Fès, Maroc.
2Université Sidi Mohammed Ben Abdallah, Faculté Polydisciplinaire de Taza, Département de Biologie,
Laboratoire des Ressources Naturelles et Environnement, Route d'Oujda, BP 1223, Taza, Maroc
3Université Hassan II, École Nationale Supérieure d’Électricité et de Mécanique, Laboratoire de Management
Industriel, Énergétique et Technologie des Matériaux Plastiques et Composites, Route d’El Jadida, BP 8118,
Oasis-Casablanca, Maroc
* e-mail : [email protected]
RESUME
L’oléiculture est un domaine qui ne cesse de s’améliorer. Cette année, la campagne agricole
estime une production de 2 millions de tonnes, soit une hausse de 28% par rapport à l’année
2018.Cependant, ce domaine industriel génère chaque année des millions de tonnes de polluants
liquides appelés margines et des déchets solides nommés grignons. Le polluant liquide, pour la
plupart des unités de trituration d'olives, est déversé directement dans les cours d'eau sans
traitement au préalable; ce qui crée de sérieux problèmes écologiques. Tandis que les grignons
sont utilisés, pour certaines industries comme combustible.
Ce travail synthétise presque les acquis de recherche scientifique sur le traitement et/ou la
valorisation des déchets oléicoles durant cette dernière décennie notamment ceux publiés via
GoogleScholar, PubMed, Sciencedirect, Scopus, et web of science et ceux réalisés au laboratoire
LIEME de la FSDM de L'université Sidi Mohammed Ben Abdallah.
Cette étude montreque les margines peuvent être traitées par plusieurs méthodes
physicochimiques ou biologiques ou couplage entre deux méthodes; à savoir la décantation, la
coagulation floculation, l'électrocoagulation, l'adsorption, la percolation, la filtration et la
biodégradation. Elles peuvent être valorisées la fertilisation des cultures, le co-compostage, la
germination des graines, l’extraction des antioxydants et de certaines molécules bioactives ainsi
que dans la production du biogaz..Tandis que les grignons, peu d'études ayant relaté leur
utilisation comme co-combustible dans les fours de ciment, ou comme fertilisant par épandage
direct ou après leur compostage. Le choix de la technique est lié au degré de la pollution de ces
déchets et de l'objectif de traitement ou de valorisation.
Mots-Clés : Margines, grignons d'olives, valorisation, fertilisation, germination des graines,
antioxydants, biogaz, molécules bioactives
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
98
ID208
TRAITEMENT DES EFFLUENTS LAITIERS PAR VOIE ELECTROCHIMIQUE
N. ELOUTASSI1,2,*
, B. LOUASTE3, A. CHETOUANI
4, M. CHAOUCH
1
1 Laboratoire de Génie des Matériaux et Environnement, Faculté des Sciences Dhar El Mahraz, Université Sidi
Mohamed Ben Abdellah (USMBA), Fès, Maroc.
2 Laboratoire Didactique des Sciences et Innovations Technologiques, CRMEF, Fès, Maroc.
3 Laboratoire de Biotechnologie, Faculté des Sciences Dhar El Mahraz, Université Sidi Mohamed Ben Abdellah
(USMBA), Fès, Maroc.
4 LCAE, Faculté des Sciences, Université Mohammed 1
er, Oujda
*Auteur de correspondance: [email protected]
RESUME
Généralement, les industries représentent une source importante de pollution pour les
écosystèmes aquatiques. En particulier, les effluents de l’industrie agroalimentaire représentent
cette pollution pour l’environnement et surtout pour les écosystèmes aquatiques. A cause de leur
grande teneur en matière organique, ces effluents présentent des valeurs de DBO et DCO
supérieurs aux normes, des niveaux élevés d’azote et de phosphore, des concentrations
considérables en huiles et en graisses, des variations importantes de pH et de température, ainsi
qu’une conductivité élevée et une charge microbiologique très importante. Le but de ce travail est
l’application des procédés biotechnologiques pour le traitement, la valorisation et l’exploitation
des déchets industriels afin de contribuer à la diminution de la charge polluante et de participer au
développement industriel et économique durable.
Nous avons procédé au traitement et à la valorisation des rejets de l’industrie agroalimentaire
comme exemple l’industrie laitière pour diminuer la charge polluante et produire de l’énergie
renouvelable. Les procédés utilisés dans cette étude comportent des traitements électrochimiques
par oxydation avancée et par électro-fenton. Le traitement électrochimique total montre une très
bonne efficacité, plus de 90 % de la DCO s’oxyde au bout de cinq heures d’électrolyse. Le
graphite industriel a été utilisé comme cathode. Il présente un bon comportement électro-
chimique à haute surtension d’hydrogène et une bonne disponibilité. Aussi les procédés de
photolyse et d’oxydation avancée (POA) peuvent être appliqués sur des rejets avec des valeurs de
la DCO inférieures à 7 g/l (huileries et tanneries).
Les différents procédés biotechnologiques appliqués sont à la fois dépolluants et valorisants, en
plus sont simples, faciles et réalisables et économiques à l’échelle industrielle.
Mots clés : Rejets industriels, Valorisation, Procédés de photolyse et d’oxydation avancée
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
99
ID209
DECHET OLEICOLE AU SERVICE DE LA CARENCE DES ANTIOXYDANTS
ALIMENTAIRES: CAS DU BEURRE
H. MIKDAME1*, E. KHARMACHE
2, K. ALAOUI
2, Z. MAJBER
1, Y. ROKNI
2, M. TALEB
1,
Z. RAIS1
1 Laboratoire d’Ingénierie d’Electrochimie, de Modélisation et d’Environnement. Faculté des Sciences Dhar Mahraz,
Université Sidi Mohamed Ben Abdellah, Fès, MAROC
2 Laboratoire de Biochimie et de Biotechnologie. Faculté des Sciences. Université Mohamed Premier, Oujda,
MAROC
RESUME
Le bassin méditerranéen est confronté à une grave menace environnementale causée par les
déchets oléicoles. Malgré leur profil polluant, ces déchets sont considérés comme une source très
riche en antioxydants naturels; les polyphénols.
Dans cette étude, ces déchets ont été valorisés en tant qu’antioxydants naturels comparés à un
antioxydant synthétique le B-carotene. Différentes concentrations de grignons, des margines et de
B-carotène ont été additionnées au beurre commerciale et mises sous des conditions de stockage
à l’étuve (test accéléré : 60°C) pendant 28 jours. L’altération du beurre utilisée a été suivie par
une détermination de l’indice de peroxyde, l’acidité et le suivi microbiologique du beurre.
Les résultats montrent que les beurres contenant des margines et des grignons ont subi une
détérioration oxydative moins accentuée que celle du témoin (sans additifs). L’ajout des
margines au beurre a contribué à la meilleure stabilité oxydative. Cependant, l’effet antioxydant
des polyphénols présents dans les déchets oléicoles ajoutés aux beurres est assez comparable à
celui du B-carotene.
Mot clés: déchets oléicoles, polyphénols, antioxydants, beurre
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
100
ID210
ÉTUDE ETHNOBOTANIQUE DES PLANTES MEDICINALES ET AROMATIQUES
DANS LA REGION DE FES MEKNES
G. BENIAICH1, B. LOUASTÉ
2, A. CHETOUANI
3, M. TALEB
4, M. CHAOUCH
1, N. ELOUTASSI
1
1 Laboratoire de Génie des Matériaux et Environnement, Faculté des Sciences Dhar EL Mahraz, Université Sidi
Mohamed Ben Abdellah, Fès, Maroc.
2 Laboratoire de Biotechnologie, Université sidi Mohammed Ben Abdellah, Fès, Maroc.
3 LCAE, Faculté des Sciences, Université Mohammed 1
e , Oujda
4 Laboratory of Materials and Environment Engineering, Sidi Mohamed Ben Abdellah University, Faculty of
Sciences Fes, Morocco.
RESUME
Dans le but d’inventorier les plantes aromatiques et médicinales (PAM) utilisées en médecine
traditionnelle dans la région de Fés- Meknès, une enquête ethnobotanique a été menée auprès des
herboristes dans les villes de Fés, Imouzzer, Ifrane et Meknès en perspective de la généraliser au
niveau de toute la région. Le questionnaire de l’enquête couvre plusieurs axes : - Le nom
scientifique des PAM et aussi les noms en arabe et amazigh ; - L’origine et le type des plantes
utilisées, - La période de récolte ; - Le mode et la durée de préparation ; - Les pathologies traitées
avec les PAM ; - La partie des PAM utilisée ; - La forme d’emploi ; -Le mode d’administration ;
- La posologie et la durée de traitement ; - La toxicité.
Les résultats obtenus ont montrés que quatre-vingt pour cent des herboristes interrogés ont
accepté de nous fournir des informations sur les plantes de la région étudiée. Cent vingt espèces
regroupées en 60 familles ont été recensées pour traiter 45 maladies. Les plantes inventoriées se
répartissent en 4 groupes selon la fréquence de citation.
Dans cette étude nous présenterons les résultats des plantes qui traitent les maladies rarement cité
dans la bibliographie, il s’agit en l’occurrence de l’insomnie et la nervosité, l’asthénie (faiblesse
et fatigue physique), les infections buccales et gingivales.
Les plantes les plus citées pour traiter ces maladies sont ; Salvia officinalis, Lavandula dentata,
Matricaria chamomilla, Rosmarinus officinalis, Allium cepa, Origanum vulgare, Origanum
majorana, Marrubium vulgare, Lepidium sativum et Ocimum basilicum. Les Lamiaceae
représentent la famille la plus citée.
En conclusion, on a pu mettre en valeur certaines plantes et sauvegarder certaines connaissances
acquises par les herboristes, ce qui peut ouvrir une voie de recherche sur les plantes efficaces les
plus utilisées en médecine traditionnelle.
Mots clés : Enquête ethnobotanique, Médecine traditionnelle, Plantes médicinales et
aromatiques, région de Fès- Meknès
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
101
ID211
EVALUATION DES RESSOURCES EN SOL DE HUIT STATIONS DIFFERENTES DE
LA REGION TAZA – TAOUNATE
S. REZOUKI 1,2
, A. ALLALI 1,2
, B. LOUASTE3, Y. BOUCHELTA
4, M. CHAOUECH
1, M. FADLI
2,
N. ELOUTASSI1
1 Laboratoire Génie des Matériaux et Environnement, Faculté des Sciences Dhar El Mehraz, USMBA, Fès
2 Laboratoire Nutrition Santé et Environnement, Faculté des Sciences kénitra, UIT, Kénitra
3 Laboratoire de Biotechnologie, Faculté des Sciences Dhar Mahraz, USMBA, Fès, Maroc.
4 Laboratoire de biotechnologie et préservation des ressources naturelles, Faculté des Sciences Dhar El Mehraz,
USMBA, Fes
RESUME
Tout les ressources naturelle ont un effet bénéfique pour l’homme est plus précisément les
ressources en sols qui constituent l’une des composantes essentielles des ressources terrestres
jouant un rôle importants dans le développement agricole et la durabilité écologique. Ils
représentent par conséquent une ressource naturelle très précieuse, même si elle est souvent
négligée.
La zone étudiée Taza-Taounate est un ensemble très vaste de reliefs montagneux du Maroc nord
central caractérisé par une gamme bioclimatique très variée qui permette l’installation d’une flore
riche à endémisme marqué par rapport à la flore marocaine. Dans le but de développer les
connaissances sur les ressources en sols dans la région d’étude et leurs influences sur
l’installation et la répartition des écosystèmes des plantes aromatiques et médicinales (PAM), des
études ont été menées dans le terrain et dans le laboratoire sur différents échantillons du sol
collectés à partir de plusieurs stations de la région d’étude.
La caractérisation physico-chimique (Texture, PH, Matière organique, CaCO3, CEC, ……) des
sols de huit stations de la région d’étude à permis de mettre en évidence la dominance de la
fraction argileuse dans les stations S2 et S3 et la fraction limoneuse dans les stations S1, S4, S5,
S6 et S7. Les sols étudiés présentent des teneurs faibles en matière organique (9,7 % à 22,9%),
élevé en CaCO3 (10,1% à 24,9%) et un pH moyennement basique (7 ,81 à 7,01). Le calcium est
l’élément le plus dominant dans toutes les stations avec des valeurs varient entre 51,52 et
74,91meq /100, les autres bases échangeables (Mg2+, Na+,K+) présentent des teneurs
relativement faibles. Les valeurs de CEC sont relativement importante et varient entre 36,12 et
81,13meq /100g.
Mots clés : Taza-Taounate, sol, Texture, CaCO3, CEC, pH, Bases échangeables
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
102
ID212
CARACTERISTIQUES MICROBIOLOGIQUES DES EAUX D’OUED FES UTILISEES
EN IRRIGATION
J. FAOUZI 1*
, M. BEN ABBOU2, Z. MAJBAR
3, M. CHAOUCH
1, N. ELOUTASSI
1,4
1Laboratoire de Génie des Matériaux et Environnement, Université sidi Mohammed Ben Abdellah, Fès, Maroc.
2Laboratoire des Ressources Naturelles, Faculté Polydisciplinaire de Taza, Maroc.
3Laboratoire d’Ingénierie, d’Eléctrochimie, de Modélisation et Environnement, Université sidi Mohammed Ben
Abdellah, Fès, Maroc.
4Laboratoire Didactique des Sciences et Innovations Technologiques, Centre Régional des Métiers de l’Education et
de la Formation, Fès, Maroc.
*Auteur de correspondance: [email protected]
RÉSUMÉ
La pénurie d’eau ne cesse d’augmenter au fils des années et plus encore dans les régions arides et
semis arides. Ce grand besoin met en évidence la réutilisation des eaux usées en irrigation un
moyen précieux et renouvelable. Certes que ces eaux sont riches en éléments nutritifs, notamment
en azote, potassium et phosphore, des atouts pour une meilleur récole sans ou avec mois de
fertilisant. En revanche, elles emportent en parallèle des éléments polluants qui peuvent nuire à la
qualité des sols et des plantes. Dans ce travail nous avons étudié les caractéristiques
microbiologiques des eaux d’Oued Fès utilisé en irrigation.
Les eaux d’irrigation enregistrent une moyenne à mauvaise qualité, due aux rejets de la ville de
Fès qui regroupe les effluents industriels de Dokkarat, de l’ancienne médina, Ain Nokbi et
ménagère. Les analyses microbiologiques confirment une présence inquiétante des coliformes
totaux et fécaux nuisibles pour l’environnement. La charge en œufs d’helminthes dans les eaux
d’irrigation présente un réel risque pour la population humaine et animale.
En perspective, nous allons étudier les caractéristiques physico-chimiques, les indicateurs de
pollution et suivre la contamination verticale des polluants au niveau des sols et des plantes
irrigués par les eaux d’oued Fès.
Mots clés : Eau d’oued Fès, caractéristiques microbiologique, irrigation, environnement
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
103
ID214
ETUDE DE L’ACTIVITE ANTIOXYDANTE DES HUILES ESSENTIELLES ET DES
EXTRAITS DE Lavandula dentata DE DAYT OUA
Y. EL ABDALI1,2
, B. LOUASTÉ2, M. CHAOUCH
1, A. BOUIA
2, N. ELOUTASSI
1
1Laboratoire de Génie des Matériaux et Environnement, Faculté des Sciences Dhar El Mahraz, USMBA, Fès
2Laboratoire de Biotechnologie, Faculté des Sciences Dhar El Mahraz, USMBA, Fès
Auteur de correspondance : [email protected]
RESUME
Le Maroc, par sa position biogéographique, est caractérisé par une diversité floristique riche en
plantes aromatiques et médicinales, estimées à 4200 espèces, avec une population s’adonnant
depuis longtemps à des pratiques médicales traditionnelles, du fait que la phytothérapie est
souvent bien acceptée par l'organisme et repose sur des remèdes naturels.
Dans le présent travail, on s’est intéressé à la valorisation et la justification scientifique de l’usage
de Lavandula dentata, plante aromatique et médicinale originaire de Dayt Oua, largement
utilisée en médecine traditionnelle dans la région de Fès et Imouzzer, et qui a une grande valeur
ajoutée pour la pharmacopée marocaine en général. Notre étude consistait alors à l’extraction et
la caractérisation à la fois des extraits et des huiles essentielles (extraites par différentes méthodes
d’extraction : distillation simple, distillation par Clevenger, et distillation par Clevenger assistée
par micro-onde) de cette plante. Les extraits et les huiles essentielles, ainsi obtenus, ont subit une
évaluation in-vitro de leurs pouvoirs antioxydants.
Les résultats obtenus, montrent un rendement en huiles essentielles qui varie entre 1,36% et
1,93% selon la méthode de distillation utilisée. L’analyse de ces huiles essentielles par
chromatographie en phase gazeuse / spectrométrie de masse (GC/MS) divulgue la présence de 21
composants dont, le linalol comme produit majoritaire. D’autre part, les huiles essentielles ainsi
que les extraits de cette fameuse plante manifestent une activité antioxydante importante in vitro.
En l’occurrence, la fraction des flavonoïdes extraite par l’acétate d’éthyle semble être les plus
performante en termes de pouvoir antioxydant. Ces résultats, entre autres, apporte une explication
et approuve l’utilisation de cette plante en médecine traditionnelle.
En perspectives, ce travail doit être achevé par des tests des propriétés physicochimiques et
d’autres activités biologiques de Lavandula dentata dans le domaine cosmétique, pharmaceutique
et médical.
Mots clés : Lavandula dentata, huile essentielle, distillation, antioxydant.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
104
ID215
VALORISATION d’Origanum compactum benth DE LA REGION DE TAOUNATE
A. ZEROUAL1*
, N. ELOUTASSI1, B. LOUASTE
3, F. M. CHAOUCH
1, A. CHAQROUNE
1
1Laboratoire de Génie des Matériaux et de l'Environnement(LGME). FSDM. Fez, Morocco
RESUME
Au Maroc l’utilisation des plantes dans la médicine est une pratique très lointaine. Elles ont été employées
sans modification, puis comme des extraits concentrés pour augmenter leur efficacité ou en tant que forme
sèche pour les garder pendant de plus longues périodes avec moins de dégradation. Les parties
aériennesd’Origanumcompactumbenthont été récoltées pendant le mois de juin 2018 dans la région de
Bouadel à 30 km de la villede Taounate dans le Nord du Maroc. La plante est séchée puis broyée. La
poudre obtenue est extraite par macération et sonication.L’acétate d’éthyle et le méthanol est utilisés pour
l’extraction des composés phénoliques des plantes. Puis La partie aérienne a été récoltée est soumise aussi
à une hydrodistillation à l’aide d’un dispositif de type Clevenger. L’activité antimicrobienne des extraits
bruts et des huiles essentielles ont été évaluée sur quatre souches microbiennes.Aussi l’activité
antioxydante des extraits obtenus par sonication et macération ainsi que les huiles essentielles ont été
évaluée par la méthode de DPPH. Les rendements obtenus pour les deux plantes et les deux solvants par
macération classique sont inférieurs à ceux obtenus par sonication. Ceci peut être expliqué en comparant
les principes des deux techniques. Etant donné que dans le cas de la sonication la cavitation générée par le
déplacement des ultrasons aboutissent à la destruction de la paroi et la membrane. Aussi le rendement des
extraits des deux plantes par macération, en utilisant le méthanol, est très élevé par rapport à celui de
l’acétate d’éthyle. Cependant, il est connu que le méthanol est le solvant le plus polaire, ce qui lui permet
d’extraire une large gamme des métabolites à partir du matériel végétal. Nos résultats, montrent que
l’activité antimicrobienne des extraits n’est pas significativement influencée par la technique d’extraction
(sonication et macération). L’activité antimicrobienne et antioxydante des extraits de plantes sont
principalement dues à leur teneur en composés phénoliques (acides phénolique, flavonoides, tannains …).
Les quatre extraits testés ont montré sur les zones d’inhibition une variabilité significative aussi bien entre
les extraits qu’entre les souches bactériennes. Cette différence est liée à la composition chimique de
chaque extrait et à la nature de la souche bactérienne testée. Nos résultats ont été montrés que les extraits
organiques d’Origanum compactum benth se sont avérés actifs et ont montré une activité
antioxydanteremarquable dans le balayage du radical DPPH. L’huile essentielle d’Origanum compactum
bentha été obtenue avec un rendement de 3.54% etmontré un fort potentiel inhibiteur vis-à-vis la totalité
des souches microbiennes testées.La forte activité antibactérienne et antifongique de l’huile essentielle est
due à la présence des molécules hautement active, c’est le cas de thymol et le carvacrol appartenant aux
terpènes phénoliques. Aussi ont été analysé par chromatographie en phase gazeuse couplée à la
spectrométrie de masse (CG/SM), trois échantillons d’huiles essentielles d’Origanumcompactumbenth. Ce
qui a permis de mettre en évidence 12 composés sur l’ensemble des échantillons et une variation dans la
composition chimique des huiles essentielles. Les constituants majeurs sont : le carvacrol, thymol, ɤ-
terpinène et p-cymène.
Mots-clés: Origanum compactum benth, Activité Antimicrobienne, ActivitéAntioxydante, Taounate
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
105
ID216
TRAITEMENT DES REJETS LIQUIDES PAR DES PROCEDES PHYSICO-
CHIMIQUES
I. ELMANSOURI1*, A. LAHKIMI
2, T. ELHOUARI SALMANI
3, M. CHAOUCH
3, N.
ELOUTASSI3, H. BEKKARI
1
1 Laboratoire de biotechnologie Université Sidi Mohamed Ben Abdellah, Faculté des Sciences Fès, Maroc
2 Laboratoire d’Ingénierie d’Electrochimie de Modélisation et d’Environnement, Université Sidi Mohamed Ben
Abdellah, Faculté des Sciences Fès, Maroc.
3 Laboratoire de Génie des Matériaux et Environnement, Université Sidi Mohamed Ben Abdellah, Faculté des
Sciences Fès, Maroc.
RESUME
Les rejets liquides (margines) résultant de l’extraction d’huile d’olive constituent un problème
majeur de l’industrie oléicole à cause de leur pouvoir polluant et la présence d’une charge
importante en composés phénoliques. Ces derniers sont des composés toxiques pour les
microorganismes responsables de l’autoépuration des eaux et de la fertilisation des sols.
Pour réduire les effets néfastes des polluants, plusieurs procédés de traitement des eaux usées,
notamment Physicochimiques, sont mis en œuvre, en particulier, la technique de la coagulation
floculation à base d’un nouvel floculant naturel biodégradable du cactus marocain.
Les tests de coagulation floculation montrent que l’application de la poudre d’opuntia ficus
indica à une dose de 15g/L, permet d’éliminer 45,90% de DCO, 28,51% de DBO5, 44,07% de la
MS et 19,23% des polyphénols totaux, ainsi que la combinaison entre le lait de chaux avec la
poudre permet d’augmenter le taux d’abattement de DCO à 91,70%, de DBO5 à 98,14%, de 74,
38%de la MS et 37,17% des polyphénols totaux, et donc la réduction des microorganismes.
Mots clés: margine, effluent liquide, caractérisation, traitement, procédés physico-chimiques
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
106
ID217
EFFET ANTHROPIQUE ET IMPACT DU CHANGEMENT CLIMATIQUE SUR LA
BIODIVERSITE VEGETALE
A. LAFTOUHI1, B. LOUASTÉ
2, CHETOUANI
3, M. CHAOUCH
1, N. ELOUTASSI
1
1Laboratoire Génie des Matériaux et Environnement, Faculté des Sciences Dhar El Mehraz, USMBA, Fès
2Laboratoire de Biotechnologie, Faculté des Sciences Dhar Mahraz, USMBA, Fès, Maroc.
3 LCAE, Faculté des Sciences, Université Mohammed 1
er, Oujda
RÉSUMÉ
Actuellement les changements climatiques deviennent un problème majeur qui constituent un
impact environnemental nuisible aboutissent a la déséquilibration des différents écosystèmes
mondiale et ainsi marocain.
Notre travail a été effectué dans la zone de TAOUNATE située dans le sud du Rif marocain. Il
s’intéresse à l’inventaire de la végétation naturelle en fonction des conditions écologiques des
milieux et l’action anthropique. Les analyses statistiques ont été effectuées à l’aide de l’Analyse
Factorielle des Correspondances. Les principaux résultats montrent l’existence de cinq
principales formations végétales : les forêts, les matorrals, les steppes arborées, les steppes
dégradées mixtes et les steppes très localisées. En générale, la composition botanique dominante
témoigne d’une régression qualitative importante du couvert végétal et la plupart des formations
sont constituées d’espèces indicatrices de dégradation avancée. L’étude en question révèle une
recolonisation par des formations non forestières au profit d’espèces épineuses. Aussi, les
variables qui déterminent la répartition des groupements végétaux remarqués sont la pluviosité, la
lithologie (charge caillouteuse), la géomorphologie (géologie, pente, topographie, exposition,
altitude), le type de sols et l’influence anthropique.
Mot clés : changement climatique, anthropisation, biodiversité végétale
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
107
ID218
NOTIONS DU DEVELOPPEMENT DURABLE DANS LES LABORATOIRES DE LA
FSDM
S. TLEMCANI 1, N. EL OUTASSI
1, M. CHAOUCH
1, B. LOUASTÉ
2
1 Laboratoire Génie des Matériaux et Environnement, Faculté des Sciences Dhar El Mehraz, USMBA, Fès
2 Laboratoire biotechnologie, Faculté des Sciences Dhar El Mehraz, USMBA, Fès
RESUME
Les déchets générés par les laboratoires de recherche au sein de la Faculté des sciences FSDM
sont le reflet de la diversité des manipulations et méthodes d'analyses employées; qui peuvent
contenir des déchets biologiques et des produits chimiques réactifs conduisant à différents risques
de nature physico-chimique tels que l’explosion, l’inflammation ou dégagement de chaleur, ou de
nature toxique, susceptible de provoquer chez le manipulateur différents menaces ou maladies,
pour cela un traitement adéquat de ces déchets doits être fait.
Ce travail est réalisé à l’aide d’une enquête constituée de questionnaires menés dans différents
laboratoires des départements de biologie, chimie, physique, géologie, mathématique et
d’informatique à la Faculté des sciences Dar El Mahraz, Université Sidi Mohammed Ben
Abdellah de Fès.
Une enquête anonyme constituée des questionnaires, a été distribuée au près des professeurs
d’enseignement supérieur et des doctorants chercheurs à la Faculté des sciences de l’Université
Sidi Mohammed Ben Abdellah. Les paramètres adopté dans notre enquête sont l’implication des
laboratoires dans le développement durable, la gestion des déchets dangereux et la vérification de
leurs déploiement de la gestion des risques.
Grace à cette étude on a pu analyser et traiter les différents problèmes de la gestion des déchets
des laboratoires de la recherche scientifique, les résultats montrent que les connaissances vis-à-
vis les précautions standard restent insuffisantes. Les différents paramètres étudiés permettent
d’entrevoir des carences telles que le manque et l’insuffisance de formation et d’information des
étudiants sur les notions de développement durable.
Mots clés: Environnement, Développement Durable, Gestion des Déchets, Déchets Dangereux.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
108
ID219
PRODUCTION DE L’ACIDE SUCCINIQUE PAR FERMENTATION ANAEROBIE DU
LACTOSE ET DU LACTOSERUM
B. LOUASTÉ 1*
, M. CHAOUCH 2, A. CHETOUANI
3, N. ELOUTASSI
2
1 Laboratoire de Biotechnologie, Faculté des sciences Dhar El Mahraz, USMBA, Fès, Maroc.
2 Laboratoire Génie des Matériaux et Environnement, Faculté des sciences Dhar El Mahraz, USMBA, Fès, Maroc.
3 LCAE, Faculté des Sciences, Université Mohammed 1
er , Oujda
RESUME
L’acide succinique est un produit du métabolisme cellulaire présent chez tous les êtres vivants.
Il est largement demandé et utilisé dans les domaines chimiques, cosmétiques, pharmaceutiques
et agroalimentaires. Sa production se fait par synthèse pétrochimique avec un coût élevé et
polluant en même temps.
L’objectif de ce travail est de produire l’acide succinique par fermentation anaérobie du lactose
et du lactosérum, et cela dans le but de diminuer la double pollution engendrée par les effluents
laitiers et la production pétrochimique de l’acide succinique.
La production de l’acide succinique a été réalisée avec la fermentation en batch par
Actinobacillus succinogenes. Plusieurs paramètres ont été optimisés et contrôlés ; la quantité de
substrat, le taux de CO2, le pH, la biomasse, la production des acides organiques, le rendement
et la productivité de l’acide succinique.
Les résultats obtenus ont montré que la bactérie Actinobacillus succinogenes ATCC55618 a
fermenté le lactose pour en produire l’acide succinique avec un bon rendement et une bonne
productivité. En plus, cette souche a montré sa performance a fermenté directement le
lactosérum comme source de carbone sans aucun traitement préalable avec une bonne
production d’acide succinique.
La production de l’acide succinique par fermentation anaérobie du lactose et du lactosérum
constitue une alternative de biotechnologie verte qui peut réduire les coûts de procédé chimique
polluant.
Mots clés : Production de l’acide succinique, fermentation anaérobie, fermentation batch,
Actinobacillus succinogenes, lactose, lactosérum.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
109
ID222
VALORISATION DES BOUES DE LA STATION D’EPURATION DE LA VILLE DE
FES PAR CO-COMPOSTAGE AVEC DES DECHETS ORGANIQUES
K. LAHLOU1, Z. MAJBAR
1, F. ELMADANI
1, M. BEN ABBOU
2, M. EL HAJI
3, M.TALEB
1,
Z. RAIS 1*
1LIEME, FSDM, USMBA, Email : [email protected]
2Laboratoire Ressources Naturelles et Environnement, Faculté Poly Disciplinaire de Taza, Université Sidi
Mohammed Ben Abdallah-Fès.
3Laboratoire Laboratoire d'Ingénierie de recherche et d'optimisation des systèmes Industrielset logistique LRI-OSIL,
ENSEM- Université Ain Chok-Casablanca
RESUME
Dans le cadre de la stratégie du développement durable que mène notre pays visant la
préservation des ressources naturelles et l’environnement, la réduction et/ou la valorisation des
déchets organiques nuisibles pour l’environnement et la santé humaine, le compostage s’avère un
moyen écologique permettant de produire de ces déchets un amendement stable. Dans la présente
étude, nous avons valorisé les boues de la station d’épuration de la ville de Fès par co-
compostage avec d'autres substrats organiques par mise en andain selon le processus de la
digestion aérobie. Deux mélanges ont été élaborés; un avec boue et le deuxième en absence de
boue qui nous a servi de témoin. Le suivi de l'évolution des caractéristiques pysico-chimiques
(température, pH, CE, NTK, MO, C/N), spectroscopiques (UV-visible, FTIR, RX,...) et
biologiques (respiration des microorganismes, indice de germination et le test à plantes)des deux
mélangesa eu lieupour les deux composts en fonction du temps et dans les mêmes conditions
opératoires.
Les résultats enregistrent la maturation des deux mélanges en deux mois ayant un pH voisin de
la neutralité et des rapports C/N comparables à la norme européenne et sont composés de silice,
et de calcite avec présence également de quartz, de muscoviteet des teneurs en éléments minéraux
et fertilisants qui les classent parmi les composts à usage agricole et les qualifient parmi les
amendements organiques sans risque d’utilisation tout en répondant aux normesNF U 44-051
propre aux composts urbains et NF U 44-095 aux composts à boues. Les composts ainsi obtenus
se caractérisent aussi par la présence d'acide humique, des molécules organiques à haut poids
moléculaire et des structures aromatiques prouvant leurs stabilités. Les spectresinfrarouge
révèlent une réduction, relativement importante, des structures aliphatiques par rapport aux
structures aromatiques qui ont enrichi les composts et témoignentleur bonne qualité. Cette
dernière a été aussi confirmée par les résultats des tests biologiquesqui ont justifié davantage la
maturité des composts et l'absence des substances phytotoxiques.
Mots clés : Boues des STEP, Compost, Caractéristiques physicochimiques et biologiques, Tests
de phytotoxicité.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
110
ID224
PHYSICO-CHEMICAL QUALITY OF SOME WATER SOURCES OF FEZ CITY
H. ZEKRITI 1*, B. LOUASTÉ
2, M. CHAOUCH
1, N. ELOUTASSI
1
1Laboratory of Materials and Environment Engineering (LGME), Faculty of Sciences Dhar-El Mahraz, Sidi
Mohammed Ben Abdellah University, Fes, Morocco
2Laboratory of Biotechnology (LB), FSDM, USMBA, Fes, Morocco
* Correspondence author: [email protected]
ABSTRACT
Water is the source of life and allows the maintenance of life. On Earth, life can develop without
oxygen, without light (in the deep sea), but not without water. The human being is able to stay
alive 1 month without eating, but only 3 days without drinking. In Morocco and many countries,
the water is trivialized, it is enough to open a tap to obtain it at will, in other countries it is a rare
good. It is now called "blue gold". Nowadays, water represents 71% of the space on the planet,
but 3% of the blue gold is sweet and only 0.7% is accessible for human consumption. This
quantity of water is considered sufficient. Indeed water is an elementary resource to life, it is
essential for the man. It is used for daily use, agriculture, drinking, hygiene and industry. It is
with this in mind that we have undertaken this work. The main objective is to monitor and
evaluate the quality of the water of AIN CHKEF in FEZ, Morocco. In this study, we have
controlled and measured the turbidity which must not exceed 5 (NTU), the pH which must be
between 6.5 and 8.5, the conductivity which must not exceed 2700 (μs / cm), ammonium,
nitrates and nitrites.
The results show that the conductivity is between 400 and 1300 μs / cm, which means the
presence of an average grade of mineralization. The water has a practically neutral pH, therefore
a zero alkalimetric titre and the value of the turbidity is low, which means the presence of a small
quantity of fine materials in suspension. The amount of nitrogen and its derivatives are very low
which means that the water is well protected and does not contain infiltrations of fertilizers
added in agriculture. The organoleptic quality of the water is excellent whether it is the freshness
of the taste or the vitality of the flavor and smell. Therefore, we can deduce that all the chemical
elements of the AIN CHKEF water have values that are lower than those of Moroccan norms
that are admissible. Finally, most of the physico-chemical parameter values obtained from these
results are either within the range of the standards values or are well below the maximum
permissible values for a water intended for use and for human consumption.
Key words: Environment, Natural resources, physico-chemical analyzes, Water.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
111
ID230
STUDY AND REAL SIMULATION OF DAMAGE OF PRESTRESSED CONCRETE
PIPELINE INTO SOIL IN SEMI ARID AREA, MOROCCO
A. EJBOH1, A. ECH-CHEBAB
1, S. HASSI
1, K. BERRAMI
2, M. GALAI
1, M. EBN TOUHAMI
1.
1 Laboratory of Materials Engineering and Environment: Modeling and Application, Faculty of Science, Ibn Tofail
University, Kenitra, Morocco.
2 International Institute for Water and Sanitation (IEA), National office of Electricity and the Potable Water, Rabat,
Morocco
ABSTRACT
The damage of prestressed concrete pipes of drinking water during their lifetime is noticed in all
over the world, however this lack of durability of concrete pipe due to corrosion within a short
period after they were buried in soil, is more accentuated in semi-arid region of Morocco
recognized by the alternation of wet and dry periods. This several complex phenomenon depend
on many parameters that related to the concrete properties, aggressive soil, climate, and concrete-
soil-atmosphere interaction.
In this study all of these factors and interaction were gathered in a test protocol in the form of an
experimental pilot that simulate as much as possible the natural laying state of the pipes in their
real environment. For this purpose, sixteen 0,40 X 0,10m reinforced concrete mini-pipes blended
by four different formulations of which one the binder obtimized by 17% of fly ash, were
exposed to four aggressives environment (soil with chloride, soil with sulphate, soil with mix
chloride-sulphate, and soil only), in variable hydric condition during 475 days. The assembly
communicated these mini-pipes under pressure, completely immersed in soil into wetting-drying
cycles. The system was automatically controlled by humidity, temperature sensors, and
electrochemical monitoring of corrosion. All these things were connected by Internet (IoT).
The results of this simulator pilot allows to determine the main cause of damage concrete pipes,
and at same time shows that the optimization of cements with fly ashs as supplementary
cementitious materials, leads on the resistance to penetration of chloride ions and sulpahe attack
are extremely good even if in severe variable hydric condition..
Keywords: Prestressed Concrete pipeline; fly ash; Soil enriched chloride and sulfate; wetting-
drying cycles; Pilot (IoT).
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
112
ID232
CARTOGRAPHIE DE LA PRODUCTION DES MARGINES DANS LA PROVINCE
D’AL-HOCEIMA ET LEURS CRATÉRISATION PHYSICO-CHIMIQUE
A. ELABDOUNI 1, K. HABOUBI
1, M.S. ELYOUBI
2
1 Laboratoire de Science d’ingénierie et d’application, Université Abdelmalek Essaadi, Al-Hoceima, Maroc.
2 Laboratoire des Matériaux, Electrochimie et Environnement, Faculté des sciences Kénitra / Université Ibn Tofail,
Kénitra, Maroc.
RÉSUMÉ
Le but du présent travail est d’établir une cartographie de la production des déchets oléicoles
surtout les margines dans la province d’Al Hoceima. Ainsi que l’évaluation de la qualité physico-
chimique des margine de trois types d'unités de triturations différents (traditionnels, Semi-
moderne et moderne). Les résultats obtenus de cette caractérisation montrent que ces trois types
des margines ont un pH acide avec une valeur moyenne est de l’ordre de 4.7 et elles sont aussi
riches en matière organique avec un DCO moyenne de l'ordre de 159.57 g d'O2/l et une
DBO5 moyenne de l'ordre de 50.33 g d'O2/l. La conductivité électrique, les matières
en suspension, les matières grasses, les polyphénols et la teneur en chlorures ont été déterminés
avec des valeurs moyennes sont respectivement de l’ordre de 17.34 ms/cm, 6.14 g/l, 0.93 g/l, 4.3
g/l et 7.3 g de cl- /l.
Nous avons aussi évalué les métaux lourds dans ces margines, les résultats obtenus ont montré
l’absence totale du cadmium et de zinc et une présence de nickel et de plomb de forment des
traces.
Mots clés: les margines, paramètres physico-chimiques, unité de trituration, Al-Hoceima.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
113
ID238
STUDY OF ANTIOXIDANT AND ANTIBACTERIAL ACTIVITIES OF SOME MAJOR
COMPOUNDS FROM ESSENTIAL OILS
Y. El ATKI*, I. AOUAM, H. ZEJLI, A. LFITAT
1, S. HAMDI
2, A. GOURCH
1, B. LYOUSSI
1,
A. ABDELLAOUI1
1 Laboratory of Physiology Pharmacology and Environmental Health, Department of Biology, Faculty of Sciences
Dhar Mehraz, Sidi Mohamed Ben Abdellah University, Fez, Morocco.
2 Laboratory of Environmental Health, Louis Pasteur Institute of Morocco, 1 Place Louis Pasteur Casablanca
* E-mail: [email protected]
ABSTRACT
This study aims at shedding light on the antioxidant and antibacterial effects of some major
compounds of essential oils (EOs) such as thymol, carvacrol, menthol, eugenol, and geraniol.
The antioxidant effect was evaluated in vitro by three assays, namely free radical scavenging
activity against 1,1-diphenyl-2-picrylhydrzyl (DPPH), ferric reducing power (FRAP) and total
antioxidant capacity. The antibacterial activity was assessed by disc diffusion and minimal
inhibitory concentration (MIC) methods against four bacterial strains responsible for nosocomial
infections such as Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumonia and
Staphylococcus aureus.
Thymol showed better antioxidant activity as measured by DPPH and FRAP assays with IC50
values of 0.072 ± 0.03 mg/ml and 0.056 ± 0.01 mg/ml respectively. The total antioxidant capacity
method showed that carvacrol had a significant activity with a value of 512 mg equivalent to
ascorbic acid/g of EO. Concerning the antibacterial activity, thymol and carvacrol expressed
higher activity against the four strains studied.
Keywords: Major compounds; Antioxidant activity; Antibacterial effect; Nosocomial infections.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
114
ID240
DEGRADATION DES COLORANTS DE TEXTILES PAR LE PROCEDE
D’ELECTROCOAGULATION
F. TITCHOU, H. AFANGA, A. AIT ADDI, R. AIT AKBOUR, J. DOUCH, M. HAMDANI
Equipe de Chimie Physique et Environnement, Faculté des Sciences, Université Ibn Zohr, BP 8106 - Cité Dakhla
Agadir, Maroc
Auteur correspondant: [email protected]
RESUME
Les eaux usées textiles non traitées sont la cause d’une pollution importante et d’un impact
négatif sur l'environnement. Elles contiennent des composés nocifs et des sous-produits
dangereux qu’il faut traiter [1]. La production mondiale de colorants est supérieure à 7 × 108 kg
par an [2].
Le procédé d'électrocoagulation fournit un moyen simple, fiable, et rentable pour le traitement
des eaux usées sans addition de produits chimiques supplémentaires, et donc sans la production
de pollution secondaire. Il réduit également la quantité de boues à éliminer. Il utilise une source
de courant continu entre les électrodes métalliques immergées dans l'électrolyte. Le courant
électrique provoque la dissolution des plaques métalliques dans les eaux usées à traiter. Les
matériaux d'électrodes les plus répandus sont l'aluminium et le fer, matériaux efficaces et de bon
marché [3].
Dans ce travail, la dégradation des colorants de textiles a été étudiée par le procédé
d'électrocoagulation. Une cellule électrochimique indivisible équipée de différente combinaison
d’électrodes a été utilisée. Les paramètres étudiés sont les concentrations des sels de fond, la
concentration initiale des colorants, le pH initial, le courant appliqué et la nature des électrodes.
Les performances du traitement sont testées en termes d'élimination de la couleur, d'élimination
de la DCO, de l'efficacité du courant et de la consommation d'énergie électrique.
Mots clés : Electrocoagulation, Décoloration, Effluents textiles, Dégradation.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
115
ID242
ETUDE PHYTOCHIMIQUE ET EVALUATION DE L’ACTIVITE ANTIOXYDANTE
DU Thymus pallidus ET DE l'Origanum grossi
H. ZEJLI1*, Ya. EL ATKI
1, I. AOUAM
1, A. LFITAT
1, S. HAMDI
2, A. GOURCH
1, B. LYOUSSI
1,
A. ABDELLAOUI1
1 Laboratoire de Physiologie Pharmacologie et Santé Environnementale, Université Sidi Mohammed Ben Abdellah,
Faculté des Sciences Dhar el Mahraz, P.B 1796 Atlas Fès 30 000, Maroc
2 Laboratoire de Santé Environnementale, Louis Pasteur Institute of Morocco, 1 Place Louis Pasteur Casablanca
* Email: [email protected]
ABSTRACT
Depuis quelques années, les plantes médicinales suscitent, dans le monde
entier, un intérêt nouveau et persistant. Une grande partie de l’intérêt des recherches actuelles
porte sur l’étude des molécules antioxydantes naturelles qui agissent comme captateurs des
radicaux libres.
Notre étude a pour objectif d’étudier la composition chimique et d’évaluer les propriétés
antioxydantes des huiles essentielles des deux plantes Thymus pallidus et de l'Origanum grossi.
L’identification des différents composés chimiques des huiles essentielles a été réalisée par la
chromatographie en phase gazeuse, couplée à un spectromètre de masse (GC-MS). L’activité
antioxydante, a été réalisée par le biais de trois méthodes : le blanchissement du β-carotène,
piégage des radicaux libres (DPPH) ainsi que le pouvoir réducteur du fer (FRAP).
L’étude phytochimique a révélé la présence de Thymol comme composé majoritaire chez les
deux espèces végétales étudiées. Les dosages quantitatifs des polyphénols totaux et des
flavonoïdes ont révélé que le Thymus pallidus est plus riche en polyphénols (129 mg EAG/g
d’HE) et en flavonoïdes (119 mg EQ/g d’HE) comparé à l’Origanum grossi. Le test de
blanchissement du β-carotène, a montré que le Thymus pallidus possède une activité antioxydante
plus élevée (114.6%) que l'Origanum grossi. Le test de DPPH a montré que l’HE d’Origanum
grossi a un pouvoir antiradicalaire deux fois plus élevée que celui du Thymus pallidus, avec des
IC50 de l’ordre de 0.07 mg/ml, 0.14 mg/ml respectivement.
Keywords: Origanum gross; Thymus pallidus; huile essentielle; Activité antioxydante
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
116
ID243
VALORIZATION OF MARITIME WASTE FOR THE TREATMENT OF MARGINS IN
THE AREA OF FES
T. ELHOUARI SALMANI1; A. LAHKIMI²; M. TALEB
2; M. CHAOUCH
1
1* Laboratory of Materials and Environment Engineering, Sidi Mohamed Ben Abdellah University, Faculty of
Sciences Fes, Morocco.
2* Laboratory of Engineering Electrochemistry of Modeling and Environment, Sidi Mohamed Ben Abdellah
University, Faculty of Sciences Fes, Morocco.
E-mail : [email protected]
ABSTRACT
Our work concerns the treatment of vegetable waters, liquid effluents resulting from the
trituration of olives, by coagulation methods flocculation and / or adsorption by chitosan; extract
from the shells carapace. The characterization of the margines shows that they are acidic,
carrying a non-biodegradable organic load and a large load of polyphenols far exceeding the
quality standards for the discharge of effluents into watercourses, which has serious
consequences for our ecosystem.
The treatment of vegetable water by coagulation-flocculation and / or adsorption reveals that the
treatment with chitosan at a concentration of 30 mg / L eliminates respectively 86% of the dry
matter (DM), 51% and the organic load not biodegradable evaluated by measuring the chemical
oxygen demand (COD) and 52% of the total polyphenols. While a combination of chitosan at a
concentration of 30mg / L with aluminum sulfate at a concentration of 17.5g / L has eliminated
respectively 98% of the dry matter (DM), 76% and the load organic non-biodegradable evaluated
by measuring the chemical oxygen demand (COD) and 89% of the total polyphenols.
In perspective, a coupling of this treatment by a biological method could take place to eliminate
the biodegradable load of pretreated vegetable waters.
Key words: COD, Margins, total polyphenols, coagulation-flocculation, adsorption, chitosan.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
117
ID245
IMPACT DES TANNERIES DOKKARAT SUR LES EAUX D' OUED FES
Y. METARFI1*, N. IDRISSI
1, F. El MADANI
1, M. BEN ABBOU
2, M. TALEB
1, Z .RAIS
1
1Laboratoire d'Ingénierie d’Electrochimie, Modélisation et d’Environnement (LIEME), Faculté des sciences,
Université Sidi Mohammed Ben Abdellah, Fès, Maroc.
2Laboratoire des Ressources Naturelles, Faculté Polydisciplinaire de Taza, Maroc
E-mail*: [email protected]
ABSTRACT:
Les tanneries modernes se rangent parmi les industries utilisant un grand nombre d’agents
chimiques et produisent d’énormes volumes d’eaux résiduaires et de déchets solides. Avec la
capacité mondiale annuelle de 9 x 106 tonnes de peaux traitées, il est estimé que
30 - 40 x 107 m
3 d’effluents liquides sont générés (1). Ces derniers sont constitués
essentiellement de mélange de matières biogéniques des peaux et de produits chimiques qui
finissent ainsi dans les eaux usées avec un net apport en charge polluante ayant un effet toxique et
néfaste sur les eaux de surfaces.
Ce travail consiste à identifier la pollution engendrée par les tanneries et évaluer son impact sur
les eaux d'Oued Fez. Pour cela, nous avons établi un diagnostic approfondi auprès de la ville de
Fès en concertation avec les acteurs concernés afin de délimiter la zone qui regroupe le maximum
de tanneries modernes et définir les points de prélèvement d'eau d’oued Fès que nous avons
étudiés via le logiciel SIG. Ensuite, les eaux prélevées de l’amont d’oued Fès traversant la zone
industrielle Dokkarat sont caractérisées par mesure des paramètres physico-chimiques.
Les résultats montrent que quel que soit le point de prélèvement des eaux, ces dernières sont en
dehors des normes requises pour la qualité des eaux de surface, ce qui classe l'eau de l'amont
d'oued Fès de mauvaise qualité. Chose qui constitue une vraie menace pour l’environnement et la
population adjacente de la zone d’étude utilisant ces eaux dans leur quotidien.
Mots-Clés : Tanneries, Produits chimiques toxiques, Pollution des eaux, Environnement.
(1) : Saidou et al., Effets de la modernisation de tannerie sur l’impact de ses activités sur la qualité des eaux : cas de
la tannerie de Maradi au Niger international journal of engineering and science, Vol.5 PP30-38, Avril 2015.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
118
ID246
L’ANALYSE QUALITATIVE DE L’EXTRAIT D’ACETATE D’ETHYLE D’OPUNTIA
DILLENII RECOLTEE DE DIFFERENTES REGIONS AU MAROC PAR
CHROMATOGRAPHIE EN PHASE GAZEUSE CG-MS
E. LOUKILI1
,, M. RAMDANI1
1LC2AME-URAC18, Cost, PPR2-CNRST, Laboratoire de chimie Appliquée Analytique Matériaux et
Environnement, Faculté de Sciences, Université Mohammed premier, P.O. Box 717, 60000, Oujda,
Maroc
E-mail : [email protected]
RESUME
La caractérisation phytochimiquedes extraitsnon polaires de fruits d'O. Dillenii obtenus en
utilisant différents solvants, à savoir l’hexane et l'acétate d'éthyle. Les extraits de fruits d'O.
Dillenii de la peau, jus et de grainesqui ont été récoltées dans différentes régions au Maroc
(Oujda, Nador et Essaouira), ont été analysés par des méthodes spectrophotométriques, GC-
MS.Pour déterminer la composition en acides gras, 1µL d’une solution hexanique d’esters
méthyliques a été injectée dans un chromatographe en phase gazeuse et de spectromètre de
masseGC / MS-QP2010 (Shimadzu, Japon) équipé d’une colonne capillaire de type BPX25, de
30m de long, 0,25 mm de diamètre interne et un film d’épaisseur 0,25µm. L’injecteur était en
mode split, ratio 1/90 à la température de 250°C. Le gaz vecteur était l’Hélium de débit 3 ml /
min. Le détecteur à ionisation de flamme était à 270°C. La programmation de la température du
four est commesuivante :un palier de 1 min à 50 °C, une élévation de température de 50 à 150° C
à 10°C /min, un palier de 1min à 150°C, une élévation de température de 150°C à 250°C à
20°C /min, et enfin un palier de 1min. Et une température d'injecteur de 250 ° C. Le programme
de température utilisé pour le four à colonne était de 50 ° C (maintenu pendant 1 min), chauffé à
250 ° C à 10 ° C / min et maintenu pendant 1 min. La température de la source d'ions et la
température d'interface ont été réglées à 250 ° C et l'ionisation des composants de l'échantillon a
été effectuée en mode EI (70 eV). La gamme de masse scannée était de 40-300 m / z. Tous les
échantillons ont été analysés en triple. Les composés volatils ont été identifiés par comparaison
des patrons de fragmentation des spectres de masse avec ceux trouvés dans des bases de données
ou des bibliothèques. L’analyse qualitative d’extrait d’acétate d’éthyled’opuntia dillenii par
chromatographie en phase gazeuse CG-MS a permis de détecter différents composés.Tandis que
l’acide Linoléique est le plus abondant (70.090 mg/Kg de l’extrait d’acétate d’éthyle de la peau
de Nador) suivie par l’acidepalmitique (55.895 mg/Kg de l’extrait d’hexane du jus de Oujda).
Mots clés :Opuntia dillenii,GC / MS, acides gras, l’acide Linoléique, l’acidepalmitique.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
119
ID 247
ADVANTAGES OF WASTE WATER REUSE IN CONCRETE FABRICATION
F.Z. BOUAICH1*
, S. NAAMANE1, W. MAHERZI
2, N. ABRIAK
2, M. BEN ZARZOUR
2,
A. BOUCHIKHI2, M. TALEB
1, A. LAHKIMI
1, A. RAADA
3, Z. RAIS
1
1-Laboratory of Engineering of Electrochemistry, Modeling and Environment, Faculty of Sciences Dhar El Mehraz,
B.P. 1796, 30000 Atlas Fes, Morocco
2-Institut Mines Telecom, LGCgE-GCE, 941 rue Charles Bourseul, 59500 Douai, France
3-Technic Faculty of Science Errachidia, University My Smail Meknes
* Corresponding author: Email: [email protected]
ABSTRACT
Drinking water represents a major challenge for the actual and future generations. The limited
resources and cost of treatment are two important factors to consider for providing enough water
for the daily consumption of the population and for the infrastructural constructions. To use water
coming from water treatment plant as mixing water in concrete fabrication could have a great
positive environmental impactand in reducing the consumption of drinking water in the city.
This paper focuses on the use of wastewater in the city Errachidia (Morocco) in ordinary
concretes B25. The aim is to find a route of valorization of this waste and avoid to empty it in
rivers, which can causes pollution of the environment (due to important quantity of mineral and
organic matters). For that, the first part of this work deals with chemical characterization of
wastewater (especially phosphate, transition metals and organic elements contents).
The second part consists in incorporating this water as mixing water for ordinary concretes and
studying the impact of wastewater in fresh state (setting time, slump test…) and in hardening
state of concretes. Then, this matrix is compared with two types of concretes: one with potable
water, and the other with underground water.
Results have shown that wastewater is rich in transition metals and has a high content in
phosphate, which generates a delay of setting time in comparison to other waters. However,
mechanical properties of concrete made with wastewater are higher than the two other concretes.
This can be mainly explained by ionic components in wastewater.
This observation is compatible with the effect of these elements in building construction
presented in literature. Nevertheless, a work on environmental durability is required to study the
stabilization of elements in this concrete, and especially the stabilization of hydration phases.
Keywords: Mixing water, Ordinary concrete B25, Treated wastewater, Potable water,
Underground water, Mechanical strength, Splitting traction, Durability.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
120
ID249
FORMULATION AND CHARACTERIZATION OF A NEW MATERIAL TYPE PSA
COATING
O. M’HAMDI*1
, O. DUPUIS2, M. TALEB
1
1Université Sidi Mohamed Ben Abdellah, Département chimie, Laboratoire d’Ingénierie d’Electrochimie de
Modélisation et d’Environnement (LIEME), BP. 1796 Fès
2Coutings Research Intitute, Département Recherche & Développement, BE-1342 Limelette, Belgium.
* email address: [email protected]
ABSTRACT
In recent years, the concerns world of scientifics has resonated about the earth's climate balance
in civil society and politics. The sector energy is one of the most concerned by this problem.
Faced with these real challenges, controlling demand of energy is one of the keys elements. In
this area, the energy performance of buildings is a key factor, especially as the European
directives on the energy performance of buildings lead to a small revolution in the construction
sector and, ultimately, in the renovation of buildings. The purpose of thermal insulation is to
reduce heat exchange between the inside and the outside by interposing a material having the
lowest possible conduction capacity. The first aim of this work is to develop an insulating PSA
[10], thus contributing to thermal comfort, characterized by the value of l as low as possible. For
this, it is necessary to have a technique for measuring the thermal conductivity (l) of a PSA.
However, the majority of the standardized methods is used for materials with thermal resistances
greater than 0.1 m².K.W-1 and l values between 0.01 and 2 W.m-1.K-1. This means materials
whose thickness is at least greater than 1000 microns (1 mm), typically a PSA has a thickness of
a few hundred microns. The second aim is the setting up the reliable and reproducible
measurement method to the thermal conductivity l of PSA. R résistance thermique [m2 K W-1].
S surface de l’échantillon [m2]. ∆Τ différence de température de surface [ K]. T température
[K]. t temps [sec] . conductivité Thermique [W/(K m)]. l longueur de chaque section [m]. Φ flux
mesuré qui traverse la paroi [W]. ε émissivité. β coefficient d'absorption [m-1] σ constante de
Stefan-Boltzmann [5,6704•10-8 Wm-2K-4]
Keywors: PSA, Thermic Box, T°operating
Figure 1: Picture of the thermal box
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
121
ID250
L’OPTIMISATION DE LA MICROENCAPSULATION DE L’HUILE ESSENTIELLE
DU Rosmarinus officinalis.
S. EL KHARRAF1, A. FARAH
1, A. BENTAMA
1, R. SGHYAR
1, E. EL HADRAMI
1
1 Laboratoire de Chimie Organique, Faculté des sciences et Technique, Université Sidi Mohamed Ben Abdellah, BP :
2202 Route d’Imouzzer, Fès, Maroc.
Email: [email protected]
RESUME
Ces récentes années, il y a une augmentation alarmante des maladies dont les causes sont
principalement des additifs alimentaires synthétiques et l’usage non préconiser des antibiotiques,
ce qui y a poussait les chercheurs vers d’autres options plus naturelles telles les huiles essentielles
qui sont su être d’excellentes alternatives.
Ces huiles essentielles universellement connues sont des complexes de composants dans la
stabilité naturelle leurs procures des actions biologiques diffères (antibactérien, antifongique,
antioxydant…). Ce qui fait d’eux la cible de plusieurs formulationsà usages thérapeutiques et
nutritifs.
Malheureusement ces dernières sont très volatiles et ultrasensibles envers la lumière, l’air,
température moisissure et le pH ce qui rendent leurs utilisations particulièrement difficiles mais
non possibles grâce aux techniques de la micro encapsulation.
Ces méthodes sont très efficacesdont la préservation des huiles essentielles contre les facteurs
extérieurs et réduise aussi l’effet indésirable organoleptique de celles-ci. En piégeant les huiles
essentielles à l’intérieur coquant protectrice, rendent leurs usages plus performants
L’objectif de notre étude était d’optimiser la micro encapsulation par cristallisation de la solution
de l’huile essentielle Rosmarinus officinalisen jouant sur deux facteurs : la proportion complexe
d’inclusion : invité et le solvant.
Le meilleur résultat d’inclusiondans la cavité est supérieur à > 90%étaient obtenus pour les
conditions suivantes : le solvant [1:1] (v/v) et la proportion complexe d’inclusion : invité
[80 :20].
Mots clés : micro encapsulation, huile essentielle, Rosmarinusofficinalis, complexe d’inclusion,
optimisation.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
122
ID252
EVALUATION DE L’ACTIVITE ANTIOXYDANTE DES EXTRAITS DE FLEURS
COQUELICOT DE LA REGION FES SAIS
A. MARSOUL1,2
, A. BOUKIR2, M. IJJAALI
1
1: Laboratoire Chimie de la Matière Condensée Faculté des Sciences et Techniques Fès
2 : Laboratoire de Chimie Appliquée Faculté des Sciences et Techniques Fès
RESUME
Un intérêt majeur est porté actuellement sur l’étude des molécules antioxydantes d’origine
naturelle. Ce travail s’inscrit dans ce cadre et qui consiste à réaliser un criblage phytochimique de
quelques extraits de fleurs de coquelicot de la région Fès Sais. Ce criblage a permis de mettre en
évidence l’existence d’alcaloïdes, de tanins et de saponines dans ces échantillons.
L’estimation quantitative des flavonoïdes et des phénols totaux par la méthode colorimétrique a
montré que les extraits sont riches en ces composés
Une évaluation du pouvoir antioxydant a été réalisée ces échantillons via la méthode du piégeage
du radical libre DPPH ainsi que la capacité antioxydante totale (CAT) a été effectuée.
Mots clés : Coquelicot ; DPPH ; CAT ; Polyphénols totaux ; Flavonoïdes ;
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
123
ID256
TRAITEMENT EFFICACE ET RENTABLE DES LIXIVIATS, SANS GENERATION DE
BOUES
J. SEHLI* & A. TALEB*
*Environmental Process Engineering Laboratory, Faculty of Science and Technology Mohammedia, Hassan II
University of Casablanca, Morocco
Mail : [email protected]
RESUME
Une nouvelle approche pour neutraliser les différentes formes de nuisance provenant de la
décharge publique a été mené avec des équipes et experts académiques, marocains et étrangers
cette approche consiste à traiter les lixiviats avec un rendement supérieure tres important, sans
génération de boues .
A cet effet, la nouvelle technique proposée est validée, d’intérêt économique et efficace de
traitement biologique séquentielle (SBR), qui est une alternative pour toutes les villes qui ont ce
problème. Mais en utilisant aussi d’autres technologies, choisies au cas par cas, mais toujours
dans l’objectif de proposer les techniques les plus performantes et les plus économiques pour
atteindre les normes fixées
Le procédé est basé en premier sur un prétraitement anaérobie pour réduire le taux de la matière
organique contenu lixiviat, et de produire une quantité de biogaz valorisable pour produire de
l’électricité et/ou de la chaleur nécessaire au traitement et contribuer ainsi à une réduction des
coûts de fonctionnement du système de traitement
Après cette étape, le lixiviat est acheminé vers un bassin SBR. Réacteurs discontinus séquentiels
qui constituent une solution alternative aux traitements par systèmes à boues activées continus en
effectuant le traitement du carbone et de l’azote, par différentes étapes qui se suivent de façon
séquentielle éliminant ainsi les pollutions organiques et les nuisances d’odeurs,
Le lixiviat traité sera utilisé pour l’arrosage interne de la décharge, en respectant les normes de
qualité d’eau destinée à l’irrigation, tout en apportant une solution fiable au problème d’odeurs
nuisibles par une élimination totale des stocks de lixiviat qui sont en grande partie responsables
des nuisances.
Mots cles : traitement, efficacité, rentabilité, lixiviats
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
124
ID259
ORGANIC PHOTOVOLTAIC CELLS: OPERATING PRINCIPLES, RECENT
DEVELOPMENTS AND CURRENT CHALLENGES
Z. EL ASLAOUI1, Y. KARZAZI
1, 2 *
1 Laboratory of Applied Analytical Chemistry Materials and Environment, Faculty of Sciences,
University Mohammed Premier, P. O. Box 4808, 60046 Oujda, Morocco
2 LSIA, National School of Applied Sciences, ENSA Al Hoceima,
University Mohammed Premier, P. O. Box 3, 32003 Sidi Bouafif, Morocco
*Corresponding author: E-mail: [email protected]
ABSTRACT
Organic photovoltaic (OPV) cells are currently attracting a great deal of scientific and economicinterest
and are playing a crucial role as one of the leading emergent photovoltaic technologies for low cost power
production. Recent researches have unanimously proven the promise of this young photovoltaic
technology in terms of their light weight, mechanically flexibility, ease of processing and low cost. In
terms of performance, organic solar cells have witnessed a rapid increase in power conversion efficiency
driven primarily by materials development, physical understanding and device optimization. Although the
highest reported power conversion efficiencies have not yet reached those of their inorganic counterparts,
the perspective of cheap production as well as the perpetual improvements in device stability drives the
development of organic solar cells further in a dynamic way. In this review, the concept of organic solar
cells is outlined; the device structure, operating principles and performance characteristics are detailed
along with an overview of the recent developments that have been accomplished in the three major
research fields of OPV: Power conversion efficiency (PCE), process and stability. An outlook of the
imminent challenges that require more attention for future development of this technology is also
presented. In this context, quantum chemical methods have been increasingly applied by using density
functional theory (DFT) and time-dependent (TD) calculations. In this work, the study of the structural
and optoelectronic properties (HOMO, LUMO, Gap energy, Voc) is realized by using DFT method at
Becke’s three-parameter functional and Lee– Yang–Parr functional (B3LYP) level with 6-31G(d) basis
set. The calculations were performed by Gaussian 09 program supported by Gauss View 5.0. Besides,
Time-Dependent Density Functional Theory (TD/DFT) calculations were used to enumerate the
absorption properties like the maximum absorption wavelengths, the excitation energy and oscillator
strengths corresponding to molecules studied. Our results lead to the likelihood to suggest materials as
bulk-heterojunction solar cell for organic solar cells application because the electron injection process
from the studied molecules to the conduction band of the acceptor and the subsequent regeneration are
possible.
Key words: HOMO, LUMO, solar cell, Gap energy, π-conjugated, DFT, bulk-heterojunction.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
125
ID200
HYDROCHIMIE ET MODELISATION GEOSTATISTIQUE DE LA QUALITE DES
EAUX SOUTERRAINES DE LA PLAINE DE GUERCIF (MAROC ORIENTAL)
M. BEN ABBOU1*
, L. BOUGARNE1, M. EL HAJI
2, M. ZEMZAMI
3, H. BOUKA
1
1Laboratoire des Ressources Naturelles. Faculté Polydisciplinaire de Taza, B.P 1223 Taza Gare, Maroc.
2École nationale supérieure d'électricité et de mécanique (ENSEM), Route d’El Jadida. BP 8118 Oasis, Université
Hassan II, Casablanca, Maroc.
3Ministère Délégué auprès du Ministre de l’Énergie, des Mines, de l'Eau et de l'Environnement, Chargé de l'Eau,
Rabat
RESUME
Durant ces dernières années, la région de Guercif a connu un grand développement agricole
matérialisé par l’augmentation des superficies agricoles. Cette région a en effet connu un grand
flux des grands agriculteurs venus des différentes régions du Maroc. Ce flux est justifié
principalement par le fait que les ressources en eau de cette région sont importantes et que les
différentes nappes sont situées généralement à des faibles profondeurs.
Les potentialités des outils SIG offrent un grand support pour la visualisation et la modélisation
des données géospatiales et permettent une bonne analyse des paramètres environnementaux. La
pollution des ressources en eau est un problème majeur de la gestion de ces ressources et
spécialement lorsque ces ressources sont exploitables par la population en eau de boisson. Dans
le présent travail nous essayons de présenter un modèle géostatistique par outils SIG afin de
déterminer l’état de la qualité et l’élaboration des cartes de synthèse des eaux souterraines de
cette région, en se basant essentiellement sur l’étude des paramètres physico-chimiques des eaux
souterraines. Les analyses ont été effectuées sur 30 points de prélèvement bien réparti au niveau
de ces nappes selon des méthodes normalisées.
Les analyses physico-chimiques réalisées montrent des anomalies en Na+, Cl
-, SO4
2-, et K
+ qui
peuvent être directement liées à la dissolution de l’halite et du gypse présents dans notre secteur
d’étude sous forme de diapirs. Les fortes concentrations en NO3- sont à mettre en relation
probablement avec l’utilisation des engrais chimiques riche en azote (N).
Mots clés : Qualité des eaux, méthodes normalisées, carte de synthèse, SIG, Guercif.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
126
ID264
VALORISATION DES DECHETS SOLIDES DOMESTIQUES TRIE A LA SOURCE
K. MSSYAH, A. TALEB, N. SADKI
Département Génie des Procédés et Environnement (GPE), Faculté des Sciences et Techniques de Mohammedia
(FSTM), Université Hassan II de Casablanca-MAROC
ABSTRAIT
La quasi-majorité des déchets qui arrivent à la décharge sont des déchets ménagers
essentiellement fermentescibles sans être traités sans aucune valorisation préalable. Ce qui génère
des nuisances et des effets néfastes sur l’environnement et la santé.
Or les ordures doivent être considérées comme une ressource et non des déchets. La société civile
veut donc avoir son mot à dire…. Un sujet plus que jamais d’actualité ! D’où l’idée de trouver
une solution technique faisable à ce problème, en passant par un procédé qui nous permettrait non
seulement d'optimiser nos propres déchets mais de les valoriser en générant de l'énergie
(électricité et chaleur).
Le procédé de digestion anaérobie, également appelée « méthanisation » est un processus
biologique ayant l’un des plus important pouvoir de dégradation de la matière organique. Cette
fermentation se réalise spontanément à l’état naturel et se traduit par une libération d’énergie et
principalement une production de dioxyde de carbone et de méthane.
Pour mettre en œuvre une unité cohérente de méthanisation, il y a 6 grandes étapes
indispensables : la communication, l’étude d’opportunité, l’étude de faisabilité, la conception, la
construction et finalement l’exploitation.
Une chose à ne pas négliger, le tri à la source demeure la clef de la réussite d’un tel projet en se
conforment aux Bonnes Pratiques que la population devrait mettre en œuvre pour une
valorisation effective.
Keywords: déchets ménagers, digestion anaérobie, matière organique, méthanisation, société
civile, bonnes pratiques.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
127
ID269
THE ENVIRONMENTAL MANAGEMENT SYSTEM AND ITS APPLICATION
IMPACTS ON THE BUSINESS ECONOMY IN THE EASTERN REGION OF
MOROCCO
Z. MDEHHEB 1*
, B. ELKIHEL 1, R. BOUAMAMA
2, V. VITRY
3
1 Department of Physics and Engineering, National School of Applied Sciences, The University of Mohammed the
First. 60000. Oujda. Morocco
2 M aintenance Workshops of the ONCF, 60000. Oujda. Morocco
3 20, Parc square, University of Mons, Polytechnic Faculty, B7000 Mons - Belgium.
ABSTRACT:
Nowadays, the environment occupies more and more a priority thought for the public opinion as
well as for the local authorities, the administrations and the companies. Environmental
management improves the performance of any organization towards the environment. In this
perspective, our work consists in developing a dashboard grouping all the environmental
indicators and which can have a direct or indirect impact on the economic performance of the
company starting from the implementation of an environmental management system based on the
ISO 14001 standard. This table can serve as an environmental decision support tool while also
analyzing the results of monitoring. This approach, key for sustainable development, is
encouraged by public authorities and Moroccan economic actors.
Keywords: Company, Environmental Management System, ISO 14001 Standard, environmental
scoreboard, Economic Performance.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
128
ID272
OPTIMIZATION OF THE ACTIVE COMPOUNDS WEIGHT YIELD OF Linum
usitatissimum SEEDS
I. NAJJARI *1, S. EL KHARRAF
1 , L. EL GHADRAOUI
2, F. ERRACHIDI
2 , F. OUAZZANI
CHAHDI 1, Y. KANDRI RODI
1 .
1- Laboratory of Applied Organic Chemistry, Faculty of Science and Technology Fez, USMBA.
2- Laboratory of Functional Ecology and Environment, Faculty of Science and Technology Fez, USMBA.
*Corresponding author: [email protected]
ABSTRACT
In the last decades, there has been a rising interest in the field of medicinal plants studies and
their traditional use worldwide. In fact, Morocco is one of the Mediterranean countries
compromising a big diversity and variety of medicinal plants.
The main purpose is to optimize the factors that affect the performance of the active compounds
during solvent batch extraction using an experimental design method.
After screening, two factors (time and polarity of the solvent) were retained. Then, the
interpolation of the answers sought according to these two factors, were based on a second-
degree mathematical model.
We noted a significant increase in the yield in function of time and polarity of a binary mixture of
two solvents. Actually, the yield can reach values higher than 7%.
Keywords: Medicinal plants; extraction; active compounds; experimental design method; binary
mixture.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
129
ID273
IMPACT OF TANNERY EFFLUENTS ON THE WORKERS HEALTH
A. OMOR1*, K. EL RHAZI
2, FZ. EL MADANI
1, N. IDRISSI
1, M. TALEB
1, Z. RAIS
1
1: Laboratory of Electrochemistry Engineering, Modeling and Environment. Science Faculty of Dhar El Mahraz,
University Sidi Mohamed Ben Abdallah, Fez, MOROCCO
2: Laboratory of Epidemiology, Clinical Research and Community Health. Faculty of Medicine and Pharmacy,
University Sidi Mohamed Ben Abdallah, Fez, MOROCCO
*For correspondence: Email: [email protected]; Phone: +212 6 60 09 30 78;
ABSTRACT
This work was undertaken to know, on the one hand, the degree of pollution of the effluents of
the different skin treatment operating units in tanneries and, on the other hand, their effects on the
health of tanneries’ workers.
The tanneries' effluents were characterized by physicochemical parameters. Cross-sectional
descriptive epidemiological surveys were conducted in the Modern and Artisanal tanneries of the
city of Fez, Morocco. Our study concerned 302 workers and focused on an analysis of working
conditions ; a medico-social questionnaire was conducted. Each consenting person has completed
a questionnaire that has been translated into Arabic. The statistical analyses were performed with
SPSS.
The physicochemical characterization of the effluents of the operating units studied shows that
the unhairing-liming stages for modern and artisanal tanneries are the most loaded with
sulphides, and carry a weakly biodegradable organic load both for the tannery, which are modern
as well artisanal.
The results of the statistical analysis of the questionnaires of the subjects studied show that most
workers have a poor health.
It is concluded that almost half of workers are highly exposed to chemicals that significantly
affect their health through the appearance of symptoms on the respiratory, cardiovascular systems
and skin.
Keywords: Characterization, chromium, health risk, hydrogen sulfide, leather tanneries, tannery
wastewater.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
130
ID274
ETUDE DES CARACTERISTIQUES PHYSICO-CHIMIQUES DE DEUX
BIODECHETSPOUR LEURS UTILISATIONS DANS LE TRAITEMENT DES EAUX :
CAS DES COQUILLES DES ESCARGOTS ET DES CONES DE PIN.
R. OUAFI1, M. TALEB
1, Z. RAIS
1
1Laboratoire d’Ingénierie, d'Electrochimie, de Modélisation et d'Environnement, Faculté des Sciences Dhar el
Mahraz, Université Sidi Mohamed Ben Abdellah, Fès, Maroc
*Correspondance : [email protected]
RESUME
L’eau, véritable richesse, à la fois précieuse, fragile et indispensable à la vie de l’homme, est
exposée à différentes sources de pollution, notamment de nature domestique, agricole et
industrielle, cette contamination constitue un problème universel et cause des effets néfastes sur
l’environnement et la santé humaine.
L’utilisation des matériaux naturels à faible coût pour le traitement des eaux est une alternative
prometteuse aux méthodes physico-chimiques traditionnelles. Les recherches scientifiques se
sont orientées vers des procédés de traitement faisant appel à des matériaux naturels, abondants et
peu coûteux. Le présent travail se situe dans ce contexte et porte sur la réutilisation des
biodéchets pour la dépollution des eaux polluées les transformant ainsi en une ressource
potentiellement utile. C’est dans ce sens, que la poudre de coquille d'escargot (PCE) et la sciure
des cônes de pin (SCP) ont été examinées, la caractérisation des matériaux a été effectuée par la
microscopie électronique à balayage (MEB), la spectroscopie infrarouge à transformée de
Fourier (FTIR), l’analyse par diffraction des rayons X (DRX) etla mesure du point de charge
nulle (PCN). La cristallinité de la PCS a été évalué par la méthode de déconvolution et la taille
apparente des cristallites a été estimée à l'aide de l'équation de Scherrer. L’analyse par MEB des
matériaux révèle une structure apparente qui favorise l'adhérence des polluants tels que les
métaux lourds. L'analyse par FTIR indique la présence de groupes fonctionnels permettant la
liaison des particules polluantes avec la surface. L'analyse DRX montre que la PCE est constituée
de carbonate de calcium CaCO3 sous la forme minéralogique de l'aragonite et que la SCP
présente le modèle caractéristique de la cellulose constitué d’une phase amorphe et une phase
cristalline. Les résultats de la déconvolution indiquent que le pic cristallin (002) est directement
lié à la taille des cristallites calculée à 2,97 nm et que la cristallinité de la SCP est estimé à 56 %.
La mesure du point de charge nulle nous donne une valeur légèrement basique pour la PCS et
légèrement acide pour la SSP, ce qui signifie que pour des pH inférieurs au PCN, la surface des
matériaux pourrait interagir avec des anions, tandis qu'à des pH supérieurs au PCN elle pourrait
interagir avec des cations.
Il ressort de la présente étude que la SSP et la PCS peuvent être considéré comme des matériaux
prometteurs pour l'élimination de certaines particules polluantes des eaux usées, la
compréhension des mécanismes mise en jeu, est d’une grande importance pour la mise au point
des processus de dépollution convenable et pourrait constituer un domaine encourageant pour des
futures recherches.
Mots-clés : Coquilles d’escargots,sciure des cônes de pin,caractérisation, traitement des eaux.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
131
ID280
ENVIRONMENTAL IMPACT ASSESSMENT OF SLAUGHTERHOUSES IN
MOROCCO
E. ORENIBI, A. TALEB, U. H. OJEMBE
Département Génie des Procédés et Environnement (GPE), Faculté des Sciences et
Techniques de Mohammedia (FSTM), Université Hassan II de Casablanca-MAROC
ABSTRACT
In recent years, the red meat slaughterhouse sector has experienced a great expansion in
Morocco, given its role of supplying meat to the agglomerations of the various cities and
towns. Morocco's red meat production which stood at 510,000 tons in 2014 increased by
32% over five years thanks to the introduction of beef breeds like Charolais and Limousin
in the form of imported semen and young bulls. Thus, all the conditions are met to allow
this industry to continue its development, particularly because of the great demographic
change which is unfortunately not accompanied by a change in the material resources, and
the technical quality required by the staff. As a result, several problems can arise due to the
malfunctioning of the red meat slaughterhouses.
Slaughterhouses have become over time an obsolete working environment that does not
meet the modern criteria of hygiene and quality: Lack of fridges, average infrastructures,
deterioration of the drainage pipes, high pollution rate and inappropriate management of
wastes to mention the least.
Slaughterhouses are classified in the first group of uncomfortable, dangerous and unhealthy
establishments in accordance with the Vizieral Decree of 13 October 1933 (22 Jomada II
1352). They generate large quantities of waste water and solid waste which can be
recovered as energy products by anaerobic digestion, as fertilizers by composting or as
livestock feeds.
All the reasons are there to require an environmental impact assessment of slaughterhouses.
We are particularly interested in the slaughterhouse of Fès situated at Aïn Kadouss. The aim
is to identify and evaluate the impacts of this slaughterhouse on the biophysical, human and
socio-economic environment and also propose measures that are technically viable and
economically feasible to avoid, mitigate or compensate for it’s negative impacts on the
environment.
Keywords: Slaughterhouse, pollution, wastewater, anaerobic digestion, composting, Fès
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
132
COMMUNICATIONS
AFFICHEES Thèmes 1
Corrosion et Traitements de
Surfaces
&
Electrochimie Analytique et
Moléculaire
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
133
ID101
QSAR AND THEORETICAL EVALUATION OF THE ANTICORROSIVE ACTIVITY
OF SOME TRANS ANETHOL DERIVATIVES FOR MILD STEEL IN ACIDIC MEDIA
(COMAPARATIVE STUDY)
A. BOUOIDINA1*, M. CHAOUCH
1, M. TALEB
2, A. LAHKIMI
2, F. EL-HAJJAJI
2
1 Laboratory of Materials and Environment Engineering, University sidi Mohamed Ben Abdellah, Department of
Chemistry, Fez, Morocco
2 Laboratory of Engineering, Electrochemistry, Modeling and Environment, University sidi Mohamed Ben Abdellah,
Department of Chemistry, Fez, Morocco
ABSTRACT:
In the first part, corrosion inhibition by four molecules derived by trans anethol on mild steel was
studied in 1 M HCl solutions by using the electrochemical techniques and the weight loss
measurements.
In the second part, the quantum mechanics calculations have been applied within the frame work
of the density functional theory (DFT) in order to determine the structural and electronic
parameters of the molecules as corrosion inhibitors.
To establish quantitative structure-activity relationship models of anticorrosive effect for these
trans anethol derivatives, the work was conducted with multiple linear regression (MLR) and
multiple non-linear regression methods (MNLR). The statistical results of the MLR and MNLR
indicate that the two modeling methods can predict the studied activity well. The statistical
results indicate also that the models are statistically significant and stable with data variation in
the external validation.
Keywords: Corrosion, electrochemical techniques, DFT, QSAR.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
134
ID101
TOWARD UNDERSTANDING THE ANTICORROSIVE MECHANISM OF NOVEL
SURFACTANT BASED ON MENTHA PLAGUIM OIL AS ECOFRIENDLY BIO
SOURCED OF MILD STEEL IN ACID MEDUIM: A COMBINED DFT AND
MOLECULAR DYNAMICS INVESTIGATION
A. BOUOIDINA1*, M. CHAOUCH
1, M. TALEB
2, A. LAHKIMI
2, F. EL-HAJJAJI
2
1 Laboratory of Materials and Environment Engineering, University sidi Mohamed Ben Abdellah, Department of
Chemistry, Fez, Morocco
2 Laboratory of Engineering, Electrochemistry, Modeling and Environment, University sidi Mohamed Ben Abdellah,
Department of Chemistry, Fez, Morocco
ABSTRACT
The present work is devoted to testing the essential oil extracted from Mentha pulegium leaves
(M1) as corrosion inhibitor for for C-steel in 1M HCl solution using the both electrochemical
techniques and gravimetric measurements for evaluation of the inhibition efficiencies at different
temperatures.
Results obtained show that the inhibition efficiency (IE%) increases with an increase in
M1concentration to reach a maximum value of 92 %. In the second part of this study we sought to
determine the molecule responsible for this high efficiency, starting with the analysis of oil
chemical composition by gas chromatography coupled to mass spectrometry. This analysis
revealed that menthol (M2) and isomenthol (M3) are the principal constituents. In order to identify
the molecule responsible for the inhibition and explain its protection mechanism involved,
quantum chemical calculations and Monte Carlo(MC) simulation were used to explain the
interaction of menthol, the major constituent of M1with the Fe-surface. To confirm practically
these results, we studied the action of 1 M HCl on steel without and with addition of M2by the
both methods. A very high efficiency is obtained, an efficiency of 94 % at 10-3
M, which is
retained for a long time of exposure, and slightly decreases in function of temperature. Finally, a
good correlation between experimental data, theoretical calculations and SEM studies has been
obtained, which denies that the M1 efficiency is only a result of a synergy effect and then
confirms the high efficiency of Mentha oil and its main component (Menthol) as strong
ecological inhibitors of corrosion
Keywords: Corrosion; Ecological inhibitors; Mentha pulegium; Menthol; DFT; Monte Carlo
simulations.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
135
ID109
ANTICORROSION POTENTIAL OF SOME MALONATE DERIVATIVES ON MILD
STEEL IN HYDROCHLORIC ACID SOLUTION: GRAVIMETRIC AND
ELECTROCHEMICAL MEASUREMENTS
O. MOUADILI1*, A. AOUNITI
1, M. KADDOURI
1, M. ELMESKINI
2, M. DAOUDI
2, A.RADI
1,
B. HAMMOUTI1
1Laboratory of Analytical Applied Chemistry Materials and Environment LC2AME-, Faculty of Science, First
Mohammed University, PO Box 717, 60 000 Oujda, Morocco.
2Laboratory of Organic Chemistry, Faculty of Science,Dhar El Mahraz Sidi Mohammed Ben Abdellah
University,Fes,Morocco.
ABSTRACT
The effect of some malonate derivatives2-[(Phenyl)-Dibenzyl Amino-1-yl-méthyl]-Malonate
d’Ethyle (im1), 2-[(4-Chlorophényl)-Benzyléthylamino-Méthyl]-Malonate d’Ethyle (im2) and 2-
[(phenyl)-Morpholin-4-yl-Méthyl]-Malonate d’Ethyle (im3) on the corrosion of mild steel in
aqueous solution of (1M) hydrochloric acid was investigated at different concentrations and
temperatures by chemical and electrochemical techniques (weight loss and electrochemical
studies). The results showed that (Im1) is the best corrosion inhibitor than two other inhibitors
with a high efficiency reach until 89% at 10⁻ 3 mol/L, it observed that the inhibition efficiency
increases with an increase in the concentration and decrease with an increase in temperature for
all the inhibitors. The adsorption of inhibitor molecules on mild steel surface was found to be
spontaneous and obeyed the Langmuir adsorption isotherm. Tafel polarization measurements
revealed that malonate derivatives effectively suppressed both the anodic and cathodic processes
of mild steel corrosion in acid solution and acted as mixed-type inhibitors. EIS measurements
indicated that the addition of the four inhibitors increase the charge-transfer resistance (Rct) and
decrease the double-layer capacitance (Cdl).
Image: The inhibitors Im1, Im2 and Im3
OO
OO
CH3 CH3
N
OO
OO
CH3 CH3
N
Cl
CH3
OO
OO
CH3 CH3
N
O
Im1 Im2 Im3
Key words: Corrosion, Mild steel, organic inhibitors, Langmuir isotherm.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
136
ID110
INHIBITION DE LA CORROSION PAR LES ALCOOLS PYRAZOLIQUES
A. RADI1, B. EL MAHI
1, A. AOUNITI
1, M. KADDOURI
1 , B. HAMMOUTI
1, S. RADI
2
1Laboratoire de Chimie Analytique Appliquée, Matériaux et Environment-LC2AME FSO
2Laboratoire de Chimie Appliquée et Environnement – LCAE FSO
ABSTRACT
L'étude de la corrosion a débuté aux environs du 17éme siècle, mais ce n'est qu'au cours du
19éme siècle que l'on a étudié scientifiquement les moyens de lutter contre ce problème. La
protection par ajout d’inhibiteurs organiques contient des hétéros atomes tels que l’oxygène,
l’azote, ou des cycles aromatiques. Au cours de ce travail nous nous sommes intéressés plus
spécialement à la protection contre la corrosion par des inhibiteurs organiques synthétisés : les
alcools pyrazoliques, ainsi que la détermination thermodynamique du processus de corrosion (Ea,
ΔHa, ΔSa).
Pour fiabiliser les résultats, deux méthodes expérimentales seront employées à savoir:
Les mesures gravimétriques et les mesures électrochimiques stationnaires. Les résultats obtenus
ici montrent une efficacité élevée pour le composé L1 par rapport à L3. Ceci est dû à la chélation
favorable à cinq chaînons formés par l'azote pyrazolique et le métal (le fer). Les résultats
gravimétriques montrent que ce composé étudié est un inhibiteur efficace de la corrosion. Les
résultats électrochimiques révèlent que l’action inhibitrice de ces molécules se fait principalement
sur les sites cathodiques. Les courbes de polarisation cathodique se présentent sous forme de
droites de Tafel indiquant que la réaction d'évolution de l'hydrogène se fait selon un mécanisme
d'activation pur. L’action inhibitrice de ces molécules est due à leurs adsorptions sur la surface de
l’acier et obéit à celle de l’isotherme de Langmuir.
Keywords: Corrosion, mesures électrochimiques stationnaires, droites de Tafel, isotherme
d’adsorption de Langmuir…
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
137
ID117
WASTE WATER TREATMENT: HEAVY METALS ELIMINATION
Imane Merimi1*, Rachid Benkaddour
2, Hassan Oudda
1, Belkheir Hammouti
2
1Laboratory separation processes, Faculty of Science, University IbnTofail PO Box 242,Kenitra,
Morocco.
2LCAE-URAC 18, Faculty of Science, University First Mohammed, PO, Box 717, 60 000 Oujda,
Morocco
*Corresponding author: E-mail: [email protected]
ABSTRACT
The presence of heavy metals in nature is harmful to life forms including humans, for the
recovery or disposal of these metals in underground or surface water contaminated with industrial
waste, we can use many processes which include: adsorption, distillation, extraction, ion
exchange, precipitation, and membrane filtration.
On an industrial scale, a new spirit governs the design of plants and improving existing ones,
while seeking to minimize the pollution of waters contaminated with these metals. Among these
processes, adsorption offers the chemical industry a range of possibilities and proven solutions to
solve specific problems to this industry. At a laboratory scale, several research works carried out
or being the subject of study of the adsorptive removal of heavy metals from contaminated waters
and the parameters influencing.
In this study, we are interested in the removal of heavy metals contained in synthetic solutions by
activated carbon and bentonite chemically treated. Adsorption assays carried out on batchwise,
which showed that the fastening yields depend on the operating conditions considered. The
results obtained in this work can provide a basis for further study on industrial effluent discharges
at the end of their journey in the sea.
Key words: Water pollution, water cleanup, adsorption, heavy metals, activated carbon,
bentonite.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
138
0 1 2 3 4 5 6 7 8 9 10
0
1
2
3
4
5
6
7
8
9
10
-Zr (
kohm
.cm
2 )
Zr (kohm.cm2)
blank
0,5 g/l
1 g/l
1,5 g/l
2 g/l
0 1 2 3 4 5 6 7 8 9 10
0
1
2
3
4
5
6
7
8
9
10
-Zr (
kohm
.cm
2 )
Zr (kohm.cm2)
blank
0,5 g/l
1 g/l
1,5 g/l
2 g/l
0,0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9
0,0
0,1
0,2
0,3
0,4
0,5
0,6
0,7
0,8
0,9 blank
-Zr
(ko
hm
.cm
2)
Zr (kohm.cm2)
ID119
AMMI VISNAGA (L.) LAM, AS A GREEN ANTICORROSIVE AQUEOUS EXTRACT
OF BRASS IN 3% NACL MEDIUM: ELECTROCHEMICAL AND QUANTUM
CHEMICAL CALCULATIONS
A. CHRAKA 1*, I. RAISSOUNI
1, N. BENSEDDIK
1, S. KHAYAR
1, M. EL HADRI
2, K. DRAOUI
1,
F. CHAOUKET 1
, D. BOUCHTA 1
1 Materials and Interfacial Systems Laboratory, ERESI Team. Department of Chemistry, Faculty of Sciences of
Tetouan, University Abdelmalek Essaadi, Morocco
2 Laboratory of Condensed Matter Physics, Faculty of Sciences of Tetouan, University Abdelmalek Essaadi,
Morocco
ABSTRACT:
Inhibitors are frequently used to protect metals and alloys in several environments. The thing
that has pushed researchers to work on eco-friendly inhibitors. This convenient method has been
identifie das non-toxic, ecological and guarantee high efficiency at a cheaper price.Our study
focused on the evaluation of the inhibition efficiency of an aqueous extract of Ammi visnaga (L.)
Lam, on the corrosion inhibition of brass in 3% NaCl , using electrochemical techniques
(potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) in the
absence and presence of different concentrations of Ammi visnaga (L.) Lam, ranging from 0.5 to
2 g/L. The film formed on the metal surface was characterised by using the Scanning Electron
Microscope (SEM) techniques and energy dispersion X-ray spectroscopy. UV–Vis, FTIR
methods were used to analyze the chemical composition of the aqueous extract. The optimized
structure of Ammi visnaga (L.) Lam, molecular orbital densities and relevant parameters were
calculated by quantum chemical calculations. The theoretical study was in good agreement with
the experimental results.
Keywords: Ammi visnaga (L.) Lam, Corrosion, Quantum chemical calculations, Aqueous
extract.
Figure: Nyquist diagrams
obtained for brass in 3% NaCl
medium at different
concentrations of aqueous
Extract of Ammi visnaga (L.)
Lam
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
139
ID129
ADSORPTION BEHAVIOR OF NEWLY IMIDAZOPYRIDINE DERIVATIVE ON
CARBON STEEL IN HYDROCHLORIC ACID MOLAR: ELECTROCHEMICAL &
QUANTUM STUDIES
R. SALIM1, 2*,
E. ECH-CHIHBI1, 2
, H. OUDDA1, F. EL-HAJJAJI
2, M. TALEB
2
1 Laboratory of separation processes (LSP), Faculty of Science, University Ibn Tofail, Kénitra, Morocco
2Laboratory of Engineering, Electrochemistry, Modeling and Environment (LIEME), Faculty of Sciences,
University Sidi Mohamed Ben Abdellah, Fez, Morocco
* Corresponding author: [email protected]
ABSTRACT
The use of inhibitors is one of the most practical methods to protect steel against corrosion in
acidic solutions. Many scientists have reported that the majority of inhibitors used in the
industries are organic compounds and there mechanism of inhibition have been explained by
certain physicochemical and electronic properties of the organic inhibitor that relate to steric
effects, its functional groups, the orbital nature of donating electrons, and the electron density of
the donor atoms.
The aim of this study is to investigate the effect of imidazopyridine derivatives for c-steel in
acidic environment (HCl 1M) using weight loss, potentiodynamic polarization method and
electrochemical impedance spectroscopy (EIS). Polarization studies showed that these
compounds behave as mixed type inhibitors and adsorbed into the steel surface according to
Langmuir isotherm. The thermodynamic parameters of corrosion and adsorption processes were
determined and discussed. Also, quantum chemical calculations based on DFT methods at
B3LYP/6-31G(d,p) level of theory were performed using Gaussian 09 set of program. The results
obtained showed a good correlation with the experimental data.
Keywords: mechanism, Adsorption, EIS, potentiodynamic polarization, DFT methods.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
140
ID130
CONTRIBUTION A L’ETUDE DE L’INHIBITION DE LA CORROSION D’UN ACIER
DOUX EN MILIEU ACIDE HCL 1M PAR UN COMPOSE ORGANIQUE CBT
N. ACHNINE1, M. DRIOUCH
1, EL. ELASSIRI
1, M. SFAIRA
1, M. BENZAKOUR
1, M. EBN
TOUHAMI2
1 Laboratoire d’Ingénierie des Matériaux, de Modélisation et d’Environnement (LIMME), Faculté des Sciences,
Université Sidi Mohammed Ben Abdellah, USMBA, B.P. 1796–30000,
Atlas – Fès, Morocco.
2 Laboratoire d’Ingénierie des Matériaux et Environnement : Modélisation et Application (LIMEMA), Faculté des
Sciences, Université Ibn Tofaïl, B.P. 133–14000, Kénitra, Morocco.
Email : [email protected]
RESUME
Le présent travail est consacré à l’étude du rôle joué par 5-chloro-1H,3-benzodiazole-2-thiol noté
CBT, un composé organique (dérivé mercapto-benzimidazol) nouvellement synthétisé, sur
l’inhibition de la corrosion d’un acier au carbone en milieu acide chlorhydrique molaire. Pour y
parvenir, nous avons effectué des mesures gravimétrique et électrochimiques (stationnaire et
transitoire). Des grandeurs cinétiques du processus d’activation et thermodynamiques
d’adsorption ont également été calculées afin de déterminer le mode d’action de cet inhibiteur.
Les résultats obtenus montrent que :
La vitesse de corrosion de l’acier doux diminue considérablement au fur et à mesure qu’on
augmente la concentration de CBT dans la solution corrosive, conjointement à l’augmentation de
l'efficacité inhibitrice qui atteinte une valeur maximale de 93% à la concentration 10-3
M. Une
augmentation supplémentaire de la concentration de CBT ne provoque pas de changement
significatif dans sa performance.
Les courbes de polarisation indiquent que l’addition de l’inhibiteur CBT entraine une diminution
des densités des courants cathodiques et anodiques avec déplacement du potentiel de corrosion
vers des valeurs anodiques et cathodique, ce qui met en évidence le caractère mixte de
l’inhibiteur CBT et agit par simple adsorption en bloquant les sites actifs de la surface de l'acier.
Une assez bonne concordance a été relevée à l'instar de la confrontation des trois méthodes
dérivant de la même technique stationnaire.
Les spectres d’impédance obtenus en présence de CBT se caractérisent par une seule constante de
temps dont la taille augmente avec la concentration en CBT.
L’étude thermodynamique de la corrosion nous a permis la compréhension du mode d’action de
l’inhibiteur.
Mots clés: Mercapto-benzimidazol, EIS, PP, PM, CEE, isotherme d'adsorption
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
141
ID131
A COMBINED ELECTROCHEMICAL AND THEORETICAL STUDY INTO THE
EFFECT OF BENZIMIDAZOLE DERIVATIVES AS A CORROSION INHIBITOR FOR
MILD STEEL IN 1M HCL
E. ECH-CHIHBI 1,2
*, R. SALIM1,2
, H. OUDDA1, F. EL HAJJAJI
2, M. TALEB
2
1 Laboratory of Separation Processes, Department of Chemistry, Faculty of Science: University Ibn Tofail, Kenitra,
Morocco
2 Laboratory of Engineering, Electrochemistry, Modeling and Environment (LIEME), Department of Chemistry,
Faculty of Science: University Sidi Mohamed Ben Abdellah, Fez, Morocco
ABSTRACT:
The adsorption behavior and inhibition mechanism of two benzimidazole derivatives on the
surface of mild steel were studied using potentiodynamic polarization (PDP), electrochemical
impedance spectroscopy (EIS) and quantum chemical calculations.
The results clearly exhibit that the inhibition performance (η %) will increase with an increase in
the concentration of BIM1 and BIM2 achieves maximum value of 96% (BIM1) and 88% (BIM2)
at optimal concentration (10-3M). The metal dissolution and inhibitor adsorption phenomena
have been studied through the estimation of thermodynamic parameters. Inhibitors formed
protective layers on metal surface through adsorption as per Langmuir model. Surface studies
(SEM) revealed that the HCl medium protected by BIM1 and BIM2 could prevent the surface
damage and decrease the roughness. The DFT approach failed to explain the corrosion inhibition
rating based on the HOMO and LUMO energies of the isolated benzimidazole molecules. The
anti-corrosion mechanism of these new inhibitors on mild steel was further revealed by quantum
chemical calculations using DFT approach. In agreement with the experimental data, theoretical
results showed that the same order of inhibition efficiency.
Keywords: Benzimidazole; mechanism; mild steel; DFT; EIS; SEM.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
142
ID144
INHIBITION DE LA CORROSION DE L’ACIER DOUX EN MILIEU HCL 1M PAR
L’HUILE ESSENTIELLE DE L’Artemisia Absinthium
A. HBIKA*1 , A. BOUYANZER
1, B. HAMMOUTI
1 , A. AOUINITI
1 , E. LOUKILI
1
1 LC2AME-URAC18, Laboratoire de Chimie Analytique Appliquée, Matériaux et Environnement, Faculté des
Sciences, Université Mohammed 1er, Bd. Med VI B.P. 717, Oujda, Maroc
RÉSUMÉ
L’inhibition de la corrosion de l'acier doux dans une solution de HCl 1 M par l’huile essentielle
d’Artemisia Absinthium a été étudiée en utilisant des techniques de perte de poids, de
polarisation potentiodynamique et de spectroscopie d'impédance électrochimique (EIS). L’étude
de la vitesse de corrosion de l’acier doux dans une solution de HCL 1M en fonction du temps
d’immersion permet de montrer que la vitesse de corrosion est maximale pour une durée de 6
heures. L'efficacité d'inhibition augmente avec l’augmentation de la concentration de l’huile
essentielle, mais diminue avec l’augmentation de la température. Les résultats des études de perte
de poids étaient bien corrélés avec ceux des études d’impédance et de polarisation. Les résultats
obtenus ont révélé que l'efficacité maximale d'inhibition dépasse 70% pour une concentration de
0,2 g / l, Les résultats obtenus ont révèlé que l'action inhibitrice de l'inhibiteur était
principalement due à l'adsorption de l’huile sur la surface d'acier doux et au blocage des sites
actifs. Les études de polarisation potentiométrique suggèrent que l’huile essentielle d’Artemisia
Absinthium agi comme un inhibiteur de type mixte avec une tendance cathodique.
L'analyse de l'huile essentielle d’absinthe, obtenue par hydrodistillation, en utilisant la
chromatographie en phase gazeuse (GC) et la chromatographie en phase gazeuse / spectrométrie
de masse (GC / MS) a montré que les principaux composants étaient le Camphre (27.76%), le α-
Thuyone (16.9%) et L-terpinen-4-ol (15.8%).
Mots clés: Corrosion; Perte de poids; EIS; polarisation potentiométrique; Huile essentielle;
Artemisia Absinthium.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
143
ID145
SYNTHESE, ETUDE EXPERIMENTALE ET THEORIQUE DES DERIVES DE LA
1,2,3-TRIAZOLE
H. RAHMANI1.2
, K. ISMAILYALAOUI1, A. SAADY
1, A. ELHALLAOUI
2, M. TALEB
1
1. Laboratoire d’Ingénierie, Electrochimie, Modélisation et Environnement (LIEME), Faculté des sciences Dhar EL
Mahraz, Université Sidi Mohamed Ben Abdellah, Fès, Maroc.
2.Laboratoire de Chimie Organique, Faculté des sciences Dhar EL Mahraz, Université Sidi Mohamed Ben Abdellah,
BP : 1796, Fès, Maroc.
E-mail : [email protected]
RESUME
La corrosion est un problème industriel important : le coût de la corrosion, qui recouvre
l'ensemble des moyens de lutte contre la corrosion, le remplacement des pièces ou ouvrages
corrodés et les conséquences directes et indirectes des accidents dus à la corrosion, est estimé à
2 % du produit brut mondial. Dans ce travail nous nous sommes intéressés à la synthèse des
dérivés de la triazole via la réaction decycloaddition 1,3-dipolaire conduit aux deux
régioisomères avec des bons rendements [1], ces produits ont montrés un excellent pouvoir
inhibiteur vis-à-vis la corrosion d’acier C38 en milieu HCl1M. Les résultats expérimentaux ont été
confirmés par une étude théorique en utilisant DFT à B3LYP / 6-31G (d, p). Le composé (Ph4)
est le meilleur inhibiteur et son efficacité inhibitrice augmente avec l'augmentation de la
concentration et atteint 95% à 10-3
M [2].
O
N
Ph
Et
N3
+ CH Ph O
N
Ph
Et
NN
N
Ph
Ph4
Toluéne
/ 48h+
O
N
Ph
Et
NN
N
Ph
Ph5
Mots clés : triazole, cycloaddition, DFT, corrosion.
Reference
[1] Y.Aouine, A. El Hallaoui, A. Alami, Molbank, 2014, M 819.
[2] H. Rahmani,1,2 F. El-Hajjaji, A. El Hallaoui, M. Taleb, Z. Rais, M. El Azzouzi, B. Labriti, K. Ismaily Alaoui
and B. Hammouti ;Int. J. Corros. ScaleInhib., 2018, 7, no. 4, 509–527
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
144
ID145
INHIBITION OF MILD STEEL CORROSION IN 1M HYDROCHLORIC ACID
SOLUTION BY 1, 2, 3- TRIAZOLEREGIOISOMERS
H. RAHMANI1.2
, K. ISMAILYALAOUI1, A. SAADY
1, A. ELHALLAOUI
2, M. TALEB
1
Laboratory of Engineering, Electrochemistry, Modeling and Environment (LIEME), Faculty of Sciences,
University Sidi Mohamed Ben Abdellah, Fez, Morocco
Laboratory of organical Chemistry (LOC), Faculty of sciences, University Sidi Mohamed Ben Abdellah, Fez,
Morocco.BP: 1796, Fès, Maroc.
E-mail : [email protected]
ABSTRACT
The action of phenylacetylene on 4- (azidomethyl) -4-ethyl-2-phenyl-4,5-dihydro-1,3-oxazole at
120 ° C, in a small amount of toluene with stirring for 48 h yields two position isomers
“Regioisomers” which are separated by chromatography on silica gel column [ 1 ].
O
NPh
Et
N3
H O
NPh
Et
N
NN
Ph
O
NPh
Et
N
NN
Ph
+ +Toluene
/ 48h
Ph5 Ph4
The1-[(4-ethyl-2-phenyl-4,5-dihydro-1,3-oxazol-4-yl)methyl]-4-phenyl-
1H1,2,3triazole(Ph4)and1-[(4-ethyl-2-phenyl-4,5-dihydro-1,3-oxazol-4-yl)methyl]-5-phenyl1H-
1,2,3-triazole (Ph5) are new isomers of the triazolederivativefamily, weresynthesized and tested
on the corrosion of mildsteel in molarhydrochloricacidmolar media usingweightloss,
electrochemicalpolarization and impedancespectroscopy. Then the experimental results were
confirmed by quantum chemical calculation susing DFT at B3LYP /6-31G (d,p). The
compound Ph4 is the best inhibitor and its inhibitory efficiency in creased withincr easing
concentration and reaching 95% at 10−3
M [2].
Key words: triazole, Regioisomers, corrosion inhibition.
Reference
[1] Y.Aouine, A. El Hallaoui, A. Alami, Molbank, 2014, M 819.
[2] H. Rahmani , F. El-Hajjaji, A. ElHallaoui ,M. Taleb, Z. Rais, M. El Azzouzi, B. Labriti, K.
IsmailyAlaoui and B. Hammouti ;Int. J. Corros. ScaleInhib., 2018, 7, no. 4, 509–527
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
145
ID146
EVALUATION DE POUVOIR INHIBITEUR DE L'ACIDE PYRIDINE-2,6-
DICARBOXYLIQUE CONTRE LA CORROSION DE L’ACIER DOUX EN MILIEU
HCL 1M
A. SAADY1*
, M. TALEB1, K. ISMAILY ALAOUI
1, H. RAHMANI
1, 4, F. EL HAJJAJI
1,
J. LAZRAK1 , A. EL BIACHE
1, M. ALLALI
3, B. HAMMOUTI
2.
1-Laboratoire d'Ingénierie d’Electrochimie, Modélisation et d’Environnement (LIEME), Faculté des
sciences/Université Sidi Mohammed Ben Abdellah, Fès, Maroc.
2-Laboratoire de chimie analytique appliquée, matériaux et environnement (LC2AME), Faculté des Sciences,
B.P.717, 60000 Oujda, Morocco.
3-Université de Lyon, Laboratoire de Chimie, CNRS - Ecole Normale Supérieure de Lyon, 46 allée d’Italie, 69007
Lyon France.
4-Laboratory of organical Chemistry (LOC), Faculty of sciences, University Sidi Mohamed Ben Abdellah, Fez,
Morocco
RESUME
L’utilisation des inhibiteurs organiques constitue une méthode de choix performante pour lutter
contre la corrosion. Afin de répondre à ce besoin, notre choix s’est porté sur un composé
organique à base de pyridine c’est l'acide pyridine-2,6-dicarboxylique (DPA) contre la corrosion
d’un acier doux dans une solution d’acide chlorhydrique molaire. Nous avons utilisées les
méthodes électrochimiques stationnaire et transitoire, couplées à la méthode de perte de masse.
Les résultats expérimentaux montrent que l'inhibition augmente avec la concentration et peut
atteindre une valeur limite de 92.95% pour l'inhibiteur DPA à 10-3
M. Les courbes de polarisation
montrent que le dérivé de pyridine est de type mixte. Les données obtenues par spectroscopie
d'impédance électrochimique ont été analysées pour être modélisées par des modèles de circuits
équivalents appropriés. Les paramètres thermodynamiques et cinétiques ont été calculés et
discutés .Le processus d'adsorption de l'inhibiteur à la surface de l’acier doux suit le modèle de
l’isotherme de Langmuir. Les examens par microscopie électronique à balayage (MEB) de la
surface de l'électrode ont confirmé l'existence d'un film adsorbé.
Une étude théorique au niveau de la méthode DFT / B3LYP a été réalisée en utilisant le
programme gaussien 09 afin de corréler l'efficacité inhibitrice avec les paramètres structurels de
la molécule étudiée, ses propriétés électroniques d'inhibiteur ont été calculées et sont discutées.
Les valeurs de l'efficacité d'inhibition calculées à partir de ces techniques sont raisonnablement
en accord.
Mots clés : DFT, B3LYP, MEB, pyridine, DPA.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
146
ID153
ELECTROCHEMICAL AND THEORETICAL EVALUATION OF NEW NATURAL
ORGANIC DYE AS A CORROSION INHIBITORS FOR MILD STEEL IN
HYDROCHLORIC ACID SOLUTION 1M
J. LAZRAK 1, A. MARSOUL
2, A. BOUKIR
3, M. TALEB
1, S. ALAOUI MRANI
1, F. EL-HAJJAJI
1,
T. SAFFAJ4
1Laboratory of engineering of electrochemistry, modelisation and environment, Faculty of Sciences, university of
sidi Mohamed ben abdelah , BP 1796, 30000 Atlas, Fès, Morocco.
2Laboratory of Chemistry of Condensed Matter, Sidi Mohamed Ben Abdellah University, Faculty of Science and
Technology of Fes, B.P. 2202 - Immouzer Road -Fes- Morocco.
3Laboratory of Applied Chemistry, Faculty of Science and Technology, Fez.
4Laboratory of Applied Organic Chemistry, Faculty of Science and Technology, Fez.
E-mail: [email protected]
ABSTRACT
Every year industry pays a massive and rising cast for its corrosion problems .The use of
inhibitors has a great practical importance, as they are extensively employed in reducing
corrosion rate [1,2].In this context, the corrosion inhibition of carbon steel by two derivatives of
imidazopyridine in hydrochloric acid 1M has been investigated using electrochemical technique
such as impedance spectroscopy (EIS) and potentiodynamic polarization. The polarization curves
indicated that the compounds tested acted as mixed inhibitors and the adsorption of tested
molecules on the steel surface obeys Langmuir isotherm model [3]. The temperature effect on the
corrosion behavior of steel without and with inhibitors was studied in the temperature range from
298K to 328K .The adsorption free energy and activation parameters for the presence of this
natural organic dye were determined . The quantum chemical calculation based on DFT method’s
at B3LYP /6-31G (d,p) , level of theory were performed using Gaussian 09. The theoretical
results are in goodagreement with the experimental data.
Key words:Mildsteel;Inhibition;Langmuir Adsorption;EIS;DFT.
References
1. P.B. Raja, A.K. Qureshi, A. Abdul Rahim, H. Osman, K. Awang, Corros. Sci., 69 (2013) 292.
2. A.D. Becke, Chem. Phys., 98 (1993) 5648.
3. A.D. Becke, Phys. Rev. A., 38 (1988) 3098.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
147
ID154
EXPERIMENTAL AND QUANTUM CHEMICAL STUDIES OF SOME PYRAZOLE
DERIVATIVES AS CORROSION INHIBITORS ON MILD STEEL IN MOLAR
HYDROCHLORIC ACID MEDIUM
S. ALAOUI MRANI 1, J. LAZRAK
1, N. ARROUSSE
1, A. CHTOUANI, F. El HAJJAJI
1,
M.TALEB1
1Engineering, Electrochemistry, Modelling& Environmental Laboratory (LIEME),Chemistry department, Faculty of
SciencesDhar El MahrazFes,SidiMohammed Ben AbdallahUniversity, Morocco
ABSTRACT
In this study, we discussed the inhibition properties of three new Pyrazole derivatives (DPA,
DPM and DPF) against the corrosion of mild steel in 1.0 M HCl, using the weight loss technique,
the stationary method and the transitional method. The experimental results show that the
inhibition properties increase with the concentration and can reach a limit value of 97% for the
inhibitor DPA at 10 –3
M. The curves of polarization show that the Pyrazole derivatives were a
mixed inhibitor. The data obtained by electrochemical impedance spectroscopy were analyzed to
be modeled by appropriate equivalent circuit models. The evolution of the temperature leads to a
decrease in the inhibition efficiency of the Pyrazole compounds.
Several adsorption isotherms have been modeled in order to provide additional information on
the inhibitory properties of the compounds studied. The coefficient of determination values of all
the isotherms are very high. Scanning electron microscopy (SEM) and EDX analyzes were used
to characterize the chemical composition of the film formed on the surface of the steel.
The DFT studies have also been carried out for protonated form of the inhibitor molecules by
considering that in acidic medium the heteroatoms of organic inhibitors easily undergo
protonation. The experimental and density functional theory (DFT) studies were in good
agreement.
Keywords:pyrazole, mild steel, corrosion inhibition, surface, adsorption, DFT
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
148
ID156
DEVELOPPEMENT DE NOUVEAUX CAPTEURS ELECTROCHIMIQUES A BASE DE
CYSTEINE POUR LA DETECTION DES IONS DE MERCURE
A. AMINE*, O. SALHI, A. GHANAM
Laboratoire génie des procédés et environnement, équipe analyse chimiques et biocapteurs, faculté des sciences et
techniques B.P. 146, Mohammedia, Université Hassan II, Casablanca – Maroc
* Auteur correspondant: E-mail: [email protected]
RESUME
Le mercure, polluant toxique pour les êtres vivants, est présent dans tous les compartiments de
l’environnement. Le mercure,présent dans l’eau de l’écosystème,constitue l’un des contaminants
les plus dangereux en raison de sa forte toxicité et de sa capacité à s’accumuler dans le corps
humain par l’intermédiaire de la chaîne alimentaire. Cette toxicité affecte les systèmes nerveux,
digestifs et immunitairesà des concentrations très basses (de l’ordre de µg.L-1
). Par conséquent, il
y a un grand besoin de se doter des méthodes analytiques sensibles pour la détection des traces de
mercure. En outre, les méthodes électro-analytiques sont simples, rapides, sensibles, robustes,
non-couteuses et peuvent être employées sur le terrain. Nous proposons dans ce travail
plusieursélectrodes à base de carbone telles que des électrodes de carbone vitreux (GCE), des
électrodes sérigraphies (SPE) et des électrodes à pâte de carbone conventionnelles
(CPE)modifiéesavec desdispersions stable de noir de carbone (CB), oxyde de graphène (GO),
oxyde de graphène réduit (rGO), nanotubes de carbone à parois multiples (MWCNTs), nanotubes
de carbone à paroi simple (SWCNTs) et desnanopoudres de Carbone (CNP) en vue d’améliorer
et évaluer leurs performances analytiques vis-à-visde la détection de la Cystéine (Cys).Les
mesures ampérométriques et voltamétriquesde la cystéine ont permis la détection indirecte des
ions mercuresuite à la formation du complexe non électro-actif (thiol – Hg) entrainant une
diminution significative de la réponse électrochimique de la Cystéine. Cette diminution
estproportionnelle à la concentration des ions Hg2+
. Les premiers résultats utilisant
l’ampérométrie comme technique électrochimique ont montréque les électrodes
sérigraphiéesmodifiées avec une dispersion stable de noir de carbone (SPE/CB) permettent de
doser des concentrations des ions Hg2+
de l’ordre de 1 µg.l-1
sans aucune étape de pré-
concentration ou accumulation. Les premiers tests dedétermination du Hg2+
dans des échantillons
réels d’eau sont encourageants.
Mots-clés-Ampérométrie ; Capteurs électrochimiques ; Cystéine ; Mercure (Hg2+) ; Complexe
thiol-mercure, nanomatériaux de carbone
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
149
ID157
EVALUATION DE L’EFFET ANTICORROSIVE DES MOLECULES ORGANIQUES A
BASE D’OXAZOLEEN MILIEU ACIDE CHLORHYDRIQUE MOLAIRE : ETUDE
EXPERIMENTALE ET APPROCHE QUANTIQUE
N, ARROUSSE1*
, K. ISMAILYALAOUI1, A. SAADY
1, F. EL-HAJJAJI
1, M. TALEB
1
1Laboratoire d'Ingénierie d’Electrochimie, Modélisation et d’Environnement (LIEME), Faculté des
sciences/Université Sidi Mohammed Ben Abdellah, Fès, Maroc
Email correspondante : [email protected]
RESUME
L’application des acides aux procédures industrielles est très importante pour le mettre propre,
particulièrement l’acide chlorhydrique ce qui provoque des piqûres aux matériel des chaine
d’installation. Pour les protéger on ajoutant des inhibiteurs qui constituent un moyen original
d’anticorrosion.
L’objectif de ce travail est d’étudier l’effet de deux nouveaux composés organiques à base
d’oxazole sur l’inhibition de la corrosion de l’acier C38 en milieu HCl 1M. Les résultats ont été
démontrés par la méthode colorimétrieet électrochimie. Suivi d’une approche quantique basés
sur la méthode DFT à B3LYP /6-31G ** en utilisant gaussien 09. Les résultats obtenus montrent
que ses dérivées d’oxazolea un effet inhibiteur significatif et que leur adsorption à la surface du
métal de nature chimique. Les résultats obtenu théoriquement est en bonne corrélation avec celle
obtenu expérimentalement.
Mots-Clés : Inhibition, HCl 1M, Oxazole, DFT.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
150
ID158
ELECTRODEPOSITION DE L'ETAIN SUR DE L’ACIER ORDINAIRE PAR
COURANT PULSE
I. CHABBO*, M. OUAKKI, M. CHERKAOUI.
Laboratoire de Matériaux, d’Electrochimie et d’Environnement (LMEE), Département de Chimie, Faculté
des Sciences, Université Ibn Tofail, Kénitra, Maroc
RESUME
L’électrodéposition à courant pulsé est une technique à usage relativement récent, elle est
susceptible d’améliorer la qualité des dépôts métalliques, la vitesse du procédé ainsi
qu’élaborer des surfaces homogènes. Elle consiste à faire varier le courant ou le potentiel au
cours du temps, fournissant ainsi un plus grand nombre de paramètres à étudier: Le temps de
pulsation T, le temps de repos Toff et la durée de l’électrodéposition.
Dans ce contexte, nous avons utilisé le courant pulsé afin de réaliser des revêtements d’étain
compacts, résistants à la corrosion et brillants sur de l’acier ordinaire.
Dans un premier temps, nous avons déterminé l’influence des paramètres du courant pulsé : Toff,
T ; et le pH par rapport à l’aspect du revêtement. Cette étude nous a permis d’entrevoir l’ordre de
grandeur de ces paramètres pour réaliser des revêtements d’aspect convenable gris clair. Puis,
nous avons réalisé des revêtements épais à différentes conditions. Leur morphologie et leur
structure cristalline ont été étudiés par MEB et par diffraction des RX.
Mots clés : Dépôt, étain, courant pulsé, caractérisation
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
151
ID159
CORROSION INHIBITION OF MILD STEEL IN HCL SOLUTION BY 5-((4-PHENYL-
4,5-DIHYDRO-1H-TETRAZOL-1-YL)METHYL)QUINOLIN-8-OL
H. ABOUT1,2
, M. EL FAYDY2, Z. ROUIFI
1,2, F. BENHIBA
1, M. BOUDALIA
3, H. ZARROK
1,
A. GUENBOUR3, B. LAKHRISSI
2, H. OUDDA
1, A. ZARROUK
3
1Laboratory of separation processes, Faculty of Science, University Ibn Tofail, PO Box 242, Kenitra, Morocco.
2 Laboratory of Agro-Resources, Polymers and Process Engineering, Department of Chemistry, Faculty of Science,
Ibn Tofail University, PO Box 133, 14000, Kenitra, Morocco
3 Laboratory of Electrochemistry, Corrosion and Environment, Faculty of science, Rabat, Morocco.
E-mail: [email protected]
ABSTRACT
A novel tetrazole derivative, 5-((4-phenyl-4,5-dihydro-1H-tetrazol-1-yl)methyl)quinolin-8-ol
(PTQ8) has been synthesized and characterized using 1H and 13C NMR spectroscopies. The
corrosion inhibition effect of the compound for mild steel corrosion in 1 M HCl medium has been
investigated using experimental (weight loss, electrochemical impedance spectroscopy and
potentiodynamic polarization) and theoretical approaches complemented. Inhibition efficiency of
PTQ8 increased with increase in the concentration of inhibitor and decreased with the increase in
the temperature range 298–328 K. 5-((4-phenyl-4,5-dihydro-1H-tetrazol-1-yl)methyl)quinolin-8-
ol behaves as a mixed type corrosion inhibitor according to the potentiodynamic polarization
studies. The adsorption of PTQ8 molecules onto the metal surface follows Langmuir adsorption
isotherm and the calculated Kads (equilibrium constant of the adsorption process) value reflects
strong interaction. Thermodynamic parameters and activation energy (Ea) for the mild steel
corrosion have been determined and discussed. Experimental and theoretical results are in good
agreement.
Keywords: Mild steel, Corrosion inhibition, EIS, Potentiodynamic Polarization.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
152
ID166
THE INHIBITION ACTION OF 1,4-DIALLYLQUINOXALINE-2,3(1H,4H)-DIONE ON
THE CORROSION OF CARBON STEEL IN 1 M HCL: A COMBINED THEORETICAL
AND EXPERIMENTAL APPROACH
S. EL HARTI1*
, F. BENHIBA1, H. ZARROK
1, Y. EL BAKRI
2, M. RBAA
3, M. EL FAYDY
3, B.
LAKHRISSI3, E.M. ESSASSI
2, A. GUENBOUR
4, H. OUDDA
1, A. ZARROUK
4
1Laboratory of Separation Processes, Faculty of Sciences, IbnTofail University, Kenitra, Morocco.
2Laboratoire de Chimie Organique Hétérocyclique, URAC 21, Pôle de Compétence Pharmacochimie, Université
Mohammed V, Faculté des Sciences, Rabat, Maroc.
3Laboratoire d’Agroressources, Polymères et Génie des Procédés, Université Ibn Tofail, Faculté des Sciences,
Kénitra, Morocco.
4Laboratory of Materials, Nanotechnology and Environment, Faculty of Sciences, Mohammed V University, Av. Ibn
Battouta, PO Box 1014 Agdal-Rabat, Morocco.
Email: [email protected]
ABSTRACT
The corrosion inhibitive property of 1,4-diallylquinoxaline-2,3(1H,4H)-dione on carbon steel in
1 M HCl was determined by using experimental and theoretical studies. Electrochemical results
showed that analgin showed 89% inhibition efficiency at 10-3
M and 298 K. Results showed that
this compound acts as a mixed type inhibitor. Effect of concentration of inhibitor and temperature
on corrosion inhibition efficiency has been studied. Effect of kinetic and thermodynamic
parameters has also been reported. Results show that adsorption of 1,4-diallylquinoxaline-
2,3(1H,4H)-dione on metal surface follows Langmuir adsorption isotherm. A detailed theoretical
data was obtained from molecular dynamic simulations and quantum chemical calculations using
density functional theory (DFT). All the combined results showed appreciable inhibition
efficiencies.
Keywords: Carbon steel, HCl, Corrosion inhibition, DFT, Molecular dynamic simulation.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
153
ID166
INVESTIGATION OF THE INHIBITION EFFECT OF 1,4-
DIDODECYCLQUINOXALINE-2,3(1H,4H)-DIONE ON THE CARBON
STEEL CORROSION IN 0.5 M H2SO4
S. EL HARTI1*
, F. BENHIBA1, Y. EL BAKRI
2, M. RBAA
3, M. EL FAYDY
3, B. LAKHRISSI
3,
E.M. ESSASSI2, A. GUENBOUR
4, H. OUDDA
1, A. ZARROUK
4
1Laboratory of Separation Processes, Faculty of Sciences, IbnTofail University, Kenitra, Morocco.
2Laboratoire de chimie organique hétérocyclique, URAC 21, Pôle de compétence pharmacochimie, Université
Mohammed V, Faculté des sciences, Rabat, Maroc.
3Laboratoire d’Agroressources, Polymères et Génie des Procédés, Université Ibn Tofail, Faculté des Sciences,
Kénitra, Morocco.
4Laboratory of Materials, Nanotechnology and Environment, Faculty of Sciences, Mohammed V University, Av. Ibn
Battouta, PO Box 1014 Agdal-Rabat, Morocco.
Email: [email protected]
ABSTRACT
1,4-didodecyclquinoxaline-2,3(1H,4H)-dione (DDQD) as a corrosion inhibitor on the carbon
steel surface in 0.5 M H2SO4 was researched with electrochemical measurements and theoretical
calculations. Polarization curves manifest that DDQD is a mixed-type inhibitor. EIS reveals that
the inhibitor adsorb on the carbon steel surface. Potentiodynamic polarization experiment results
indicate the adsorption of DDQD on the surface of carbon steel is discovered to accord with
Langmuir adsorption. Furthermore, kinetic and thermodynamic parameters of the adsorption
process are calculated and discussed. Besides, theoretical calculations are utilized to explore the
mechanism of inhibition of 1,4-didodecyclquinoxaline-2,3(1H,4H)-dione.
Keywords: Corrosion inhibitor, H2SO4, Carbon steel, EIS, Theoretical calculations.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
154
ID172
ELECTRODEPOSITION AND CHARACTERIZATION OF THIN POLYANILINE
FILMS FOR ADSORPTION OF AZO DYE CALCON
M. AIT HIMI1 ,2
*, A. AMARRAY1, P. BONNAILLIE
3, M. AZZI
1, S. EL GHACHTOULI
1
1 Laboratoire Interface matériaux Environnement, Faculté des Sciences Ain Chock, Université Hassan II,
Casablanca, Maroc.
2 Laboratoire Bio-Géosciences et Ingénierie des Matériaux, Ecole normale supérieure, Université Hassan II,
Casablanca, Maroc.
3Département des Matériaux pour le Nucléaire, CEA-Saclay, Paris, France.
E-mail: [email protected]
ABSTRACT
In recent years, the serious environmental problem has become a threat to human survival and
development, the water pollution by dyes is one of the serious environmental pollution. However,
the removal of these dyes is very important step to protect our environment. In order to find
simple, effective and economic methods for dye adsorption, the present work aims at studying the
adsorption efficiency of an azo dye “Calcon’’ by polyaniline films prepared by the
electrochemical mean. The characterization of these films by X-ray diffraction (XRD), scanning
electron microscopy (SEM) and UV–visible spectrophotometer showing an amorphous fibrillary
structure of the PANI electrodeposited. To find the best conditions for adsorption of Calcon dye,
the effect of pH, the addition of hydrogen peroxide, the contact time and the initial Calcon
concentration were studied. These experiments showcased the possibility of adsorbing 98.6% of
Calcon dye at pH 3. However kinetics and isotherm studies have showed that the adsorption
reaction follows the pseudo second-order model, and the PANI electrodeposited has a monolayer
adsorption capacity of 606.06 mg/g which is considerably high compared to all the forms of
polyaniline prepared chemically.
Keywords: Polyaniline (PANI), Electrodeposited, Azo dye, Calcon, Adsorption.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
155
ID173
ETUDE ELECTROCHIMIQUE D’UNE APATITE SUR LA CORROSION DE L’ACIER
DANS UN MILIEU HCl 1.0 M
N. FERRAA, M. OUAKKI, M. CHERKAOUI, M. BENNANI ZIATNI
Laboratoire de Matériaux, d’Electrochimie et d’Environnement (LMEE), Département de Chimie, Faculté
des Sciences, Université Ibn Tofail, Kénitra, Maroc
RESUME
L’utilisation des inhibiteurs de corrosion est devenue indispensable pour limiter l’attaque des
matériaux métalliques, du fait de l’agressivité des solutions acides utilisées dans l’industrie. Ils
présentent l‘originalité d‘être le seul moyen d‘intervention à partir du milieu corrosif, ce qui en
fait une méthode de contrôle de la corrosion facile à mettre en œuvre.
Cette étude a porté sur l‘action inhibitrice d’un composé minérale à base de phosphate sur la
corrosion de l’acier dans HCl 1.0 M. Ce composé à base de phosphate a été synthétisé au sein du
laboratoire. Elle a été réalisée par différentes techniques électrochimiques : Spectroscopie
d’impédance électrochimique et polarisation stationnaire. Les résultats obtenus montrent que
l’efficacité inhibitrice dépend de la concentration du composé, de la température et du temps
d‘immersion. Elle atteint 93 % à une concentration de 50 ppm.
Mots clés : Apatite, Inhibiteur, Corrosion, HCl, MEB.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
156
ID186
ELECTROCHEMICAL CHARACTERIZATION OF NEW INHIBITORS BASED ON
PHOSPHATE GLASSES EFFECTIVE FOR CORROSIO IN HYDROCHLORIC ACID
MEDIUM
M. LAOURAYED1*
, M. EL MOUDANE1, M. BOUDALIA
1, M. KHACHANI
1, A. GUENBOUR
1 A.
BELLAOUCHOU1, A. GHANIMI
1, A. ZARROUK
1, M. TABYAOUI
1
1Laboratory of Materials, Nanotechnology and Environment, Faculty of Sciences, Mohammed V University Rabat,
Av. Ibn Battouta, BP 1014 Agdal-Rabat, Morocco
ABSTRACT
The corrosion-inhibiting effects in 1M HCl solution was carried out in the presence of an
inorganic compound of the phosphate glass type (NBP). This study was performed using
electrochemical techniques and scanning electron microscopy, and the compositions of the
glasses are studied using energy dispersive X-ray spectrum (EDS). The structural characteristics
were investigated by X-ray diffraction, thermal analysis and Raman studies. Various corrosion
parameters such as Tafel slopes, Nyquist plots, corrosion current density, and charge transfer
resistance, have been calculated to better understand the inhibition mechanism. The results
showed that these glasses act as a corrosion inhibitor in acidic medium and their inhibition
efficiencies depend to the (NBP) content in the glass. In addition it has been observed that the
pyrophosphate chains provided a better protection that has been proven by SEM analysis.
Keywords: mild steel, Phosphate glass, EDS spectrum, DRX, DSC, Raman, Corrosion
inhibition, SEM.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
157
ID187
EVALUATION DE L’EFFET DE SEL SUR LES PROPRIETES ANTICORROSIVES DE
L’HUILE D’ARGAN
H. LAAROUSSI1*
, A. AOUNITI 1, O. MOKHTARI
2, I. HAMDANI
1
1 Laboratoire de chimie analytique appliquée, matériaux et environnement (LC2AME), faculté des sciences Oujda,
Maroc
2 Laboratoire des sciences de l’eau, de lenvironnement et de l’ecologie (LS3E), faculté des sciences Oujda, Maroc
*e-mail: [email protected]
RESUME
L’arganier (Argania spinosa (L) Skeels), endémique du Maroc, est une espèce fruitière-forestière
à usages multiples qui pousse sauvagement dans les zones arides et semi-arides du Sud Ouest
marocain et dans des petites colonies dans la région orientale. Plusieurs études ont été publiées
montrant l’importance nutritionnelle, thérapeutique et cosmétique de l’huile d’argan.
L’effet inhibiteur de la corrosion de différentes parties de l’arganier ont été étudiés. Pendant
l’extraction traditionnelle de l’huile d’argan, une petite quantité du sel est ajoutée lors du
malaxage de la pate. Le présent travail vise à évaluer l’effet du sel ajouté sur les propriétés
anticorrosives de l’huile d’argan alimentaire et de se débarrasser de la compétition entre la
satisfaction des besoins d’alimentation humaine et des besoins industriels.
Vue l’importance de l’huile d’argan pour l’alimentation humaine, il est nécessaire de protéger sa
source unique (les amandons d’argan) et de trouver d’autres alternatifs qu’on peut utiliser comme
inhibiteur vert de corrosion.
Mots clés : Argania spinosa, corrosion, acier doux, gravimétrie, méthodes éléctrochimiques.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
158
ID189
INHIBITION CORROSION OF DUCTILE IRON BY THIADIAZOL-THIOL
DERIVATIVE
M. BOUANIS1, M. TOURABI
1, *, I. NADI
1, A. NYASSI
1, K. NOHAIR
1, A. BENIKDES
2,
O BENALI3, C. JAMA
4, F. BENTISS
1, 4
1Laboratoire of Catalysis and Materials Corrosion (LCCM), Faculty of Science, UniversityChouaibDoukkali, El
Jadida, Morocco.
2Department of civil engineering and hydraulic, Faculty of Technology, University of Saïda- Algeria.
3Department of Biology, Faculty of Sciences, University of Saïda- Algeria.
4Univ. Lille, CNRS, INRA, ENSCL, UMR 8207, - UMET - Unit of Materials and Transformations, F-59000 Lille,
France
ABSTRACT:
Corrosion in drinking water distribution systemscanbecaused by severalfactors, including the
type of materialsused, the age of the piping and fittings, the stagnation time of the water and the
water quality in the system, includingits pH. The aim of thisworkis to study the effect of
inhibiting the 5-amino-1,3,4-thiadiazole-2-thiol (ATT) on the corrosion of ductile iron in a
solution simulating the ground. This studywaspreparedusingelectrochemicalmethods. The results
show that the ATT is a good inhibitor in thisaggressiveenvironment. The resultsobtainedfrom the
different corrosion assessment techniques are in good agreement. The effect of immersion time,
temperature, pH and alkalinity of environmentwerealsostudied and the resultswerediscussed.
Keywords: Ductile iron, Simulatedsoil solution, Polarizationcurve, Inhibition, Corrosion
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
159
ID194
THE ANTI-CORROSIVE BEHAVIOR OF TREE EXTRACTS GUM FROM THE
NORTH COAST OF AFRICA FOR THE MILD STEEL CORROSION IN ACIDIC
MEDIUM
M. EL AZZOUZI1,*
, K. AZZAOUI2, A. AOUNITI
1, S. JODEH
4, A. LAMHAMDI
3, E. MEJDOUBI
2,
B. HAMMOUTI1, A. ZARROUK
1
1Laboratory of Applied Chemistry and Environment LCAE, Faculty of Science, First Mohammed University, PO
Box 717, 60 000 Oujda, Morocco. 2 Laboratory of Mineral Solid and Analytical Chemistry LMSAC, Department of Chemistry, Faculty of Sciences,
Mohamed 1st University, P.O. Box 717, Oujda60000, Morocco. 3 National School of Applied Sciences Al Hoceima, Mohamed 1st University, P.O. Box 717, Oujda, 60000,
Morocco. 4 Department of Chemistry, An -Najah National University, Department of Chemistry, P. O. Box 7, Nablus, State of
Palestine.
*Corresponding author: E-mail:
ABSTRACT
The plants have been recognized as sources of naturally occurring compounds that are generally
referred to as “green” compounds, it contributes to many physical, chemical and biological
properties. In the last few years, there has been a growing trend in the use of natural products as
corrosion inhibitors for metals in various corrosive media. In the current study, the inhibitive
activity towards the mild steel corrosion has been investigated by the gum exudates from the gum
Arabic trees at three location in the north coast of Africa (GAMo : Morocco, GASe ; Senegal and
GAMau ; Mauritania) in the acidic medium 1.0 M HCl. The results reveal clearly that the Gums
Arabic are a mixed type corrosion inhibitor with a highest inhibition at 1.0 g/L reach until 95%.
The Nyquist plots showed that when the three Gums concentration increase, charge-transfer
resistance increased and double-layer capacitance decreased, involving increased inhibition
efficiency. The adsorption of GAMo, GASe and GAMau on the mild steel surface obeys the
Langmuir adsorption isotherm.
Keywords: Gum Arabic, Green Inhibitor, Food industry, EIS, mild steel, Polarization
measurement
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
160
ID196
L’INHIBITION DE L’ENTARTRAGE PAR UN INHIBITEUR ECOLOGIQUE EN
MILIEU SIMULANT UNE EAU DURE : ETUDE ELECTROCHIMIQUE
R. ABOULAYT, D. BENMESSAOUD LEFT, M. AZZI, M. ZERTOUBI*
Laboratoire Interface Matériaux Environnement (LIME), Faculté des Sciences Ain Chock, Université Hassan II de
Casablanca, Maroc.
Auteur correspondant : [email protected]
RESUME
L’eau est un élément indispensable de la vie. Durant son circuit à travers les diverses couches
géologiques, elle dissout dans son chemin de nombreux minéraux, notamment le calcium et le
magnésium. La présence de ces derniers avec des concentrations élevées rend l’eau plus dure. Par
conséquent, ceci mène à la formation du tartre, qui engendre des problèmes aux niveaux :
hydrauliques, bactériologiques, technologiques, énergétiques, thermiques et économiques.
Que ce soit dans les réseaux de distribution d’eau potable, dans les installations industrielles ou
d’irrigation, la formation d’un dépôt de carbonate de calcium compact et adhérent sur une surface
métallique ou non, représente un problème majeur qui nécessite une intervention rapide.
C’est dans cette optique où notre étude s’inscrit. Notre objectif est d’évaluer un certain nombre
d’extraits de plantes locales et voir leur influence sur la vitesse de formation du tartre. Une étude
électrochimique et d’analyse de surface est menée en utilisant la chrono-ampérométrie et la
spectroscopie d’impédance électrochimique (SIE) et la microscopie optique. Les résultats sont
présentés et discutés.
Mots clés : Entartrage, Inhibition, Chronoampérométrie, Eau dure, SIE
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
161
ID233
ETUDE DE LA CORROSION: METHODES DE PROTECTION ET D’EVALUATION
M. NACIRI , Y. EL AOUFIR, A. GHANIMI, A. GUENBOUR, M. TABYAOUI
Laboratoire des Matériaux, Nanotechnologies et Environnement, Faculté des Sciences de Rabat, Université
Mohammed V.
ABSTRACT
La corrosion des métaux et alliages est un phénomène universellement connu qui entraîne des
pertes matérielles considérables, directes et indirectes pour les industries. Elle cause, par ailleurs,
des dommages sur l'environnement et la santé humaine. L'industrie chimique, dans tous ses
secteurs, n'en est pas épargnée. D'une part, les équipements métalliques sont souvent attaqués par
des fluides corrosifs. D'autre part, de nombreux procédés nécessitent de porter les équipements à
des températures élevées, ce qui conduit à augmenter le taux de corrosion et donc à diminuer la
durée de vie des installations. Afin de lutter contre ce fléau, plusieurs méthodes de protection ont
été développées, tel que l’utilisation des inhibiteurs de corrosion. L’utilisation de ces derniers
constitue un moyen à part entière de protection contre la corrosion métallique. Les nombreuses
études consacrées, depuis plus d’une cinquantaine d’années, à ces composés, ont abouti à
proposer des produits ou des mélanges de produits précis correspondant à des systèmes de
corrosion (couples métal/milieu corrosif) donnés. Cependant, une partie de ces composés sont des
substances chimiques synthétiques qui peuvent être coûteux et dangereux pour les êtres humains
et l’environnement. Les extraits de substances naturelles, riche source de composés organiques
naturels, se sont montrés efficaces comme inhibiteurs de corrosion pour de nombreux métaux et
alliages, notamment pour les aciers au carbone. Ils représentent donc un moyen de remplacement
possible des inhibiteurs organiques actuellement utilisés. Dans le but de mieux élucider les
mécanismes de corrosion/inhibition, on a de plus en plus recours à l’approche théorique qui
s'ajoute à la gravimétrie, aux techniques électrochimiques et aux techniques d'analyse de surfaces.
Les méthodes quantiques, citées sur ce poster donnent accès à l’ensemble des propriétés
électroniques des systèmes moléculaires et permettent donc de justifier de façon rationnelle les
régiosélectivités expérimentales, ce qui nous aide à faire une interprétation précise des résultats
d’inhibition de la corrosion.
Keywords: inhibition; gravimétrie; SIE; MEB; chimie computationnelle.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
162
ID271
EVALUATION OF ESSENTIAL OIL OF CELERI (APIUM GRAVEOLENS) AS
ENVIRONMENTALLY FRIENDLY CORROSION INHIBITOR FOR MILD STEEL IN
1M HCl
M. ZNINI1*
, A. LBOUMHAMDI1, A. ANSARI
1, J. COSTA
2, B. HAMMOUTI
3, L. MAJIDI
1
1 Université M
y Ismail, Laboratoire des Substances Naturelles & Synthèse et Dynamique Moléculaire, Faculté des
Sciences et Techniques, BP 509, 52003, Errachidia, Morocco.
2 Université de Corse, CNRS-UMR 6134, Laboratoire de Chimie des Produits Naturels, BP 52, 20250 Corti, France.
3Laboratoire de Chimie Appliquée et Environnement, Faculté des Sciences, Oujda, Morocco.
*Corresponding author: E-mail: [email protected]
ABSTRACT:
Essential oil of seeds of celeri (Apiumgraveolens) was obtained by hydrodistillation and analyzed
by GC and GC/MS. Thirty compounds were identified, accounting for 99.3 % of the total oil,
which limonene and β-selinene are the main components of this oil with 53.3 and 13.3%
respectively. The inhibitory effect of this essential oil was estimated on the corrosion of steel in
1M HCl using electrochemical polarization and weight loss measurements. The corrosion rate of
steel is decreased in the presence of natural oil. The inhibition efficiency was found to increase
with oil content to attain 86 % at 2 g/L. Polarization curves revealed that the oil of
Apiumgraveolens acts as mixed type inhibitor. The temperature effect on the corrosion behavior
of steel in 1M HCl without and with the inhibitor at 2 g/L was studied in the temperature range
from 303 to 343 K, the associated activation energy have been determined. The adsorption of oil
on the steel surface was found to obey Langmuir’s adsorption isotherm.
Keywords:Adsorption ;Apiumgraveolens;Essential oil;Mild steel;Corrosioninhibition.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
163
COMMUNICATIONS
AFFICHEES Thèmes 2
Chimie Analytique et
Environnement
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
164
ID210
ÉTUDE ETHNOBOTANIQUE DES PLANTES MEDICINALES ET AROMATIQUES
DANS LA REGION DE FES MEKNES
G. BENIAICH1, B. LOUASTÉ
2, A. CHETOUANI
3, M. TALEB
4, M. CHAOUCH
1, N. ELOUTASSI
1
1 Laboratoire de Génie des Matériaux et Environnement, Faculté des Sciences Dhar EL Mahraz, Université Sidi
Mohamed Ben Abdellah, Fès, Maroc.
2 Laboratoire de Biotechnologie, Université sidi Mohammed Ben Abdellah, Fès, Maroc.
3 LCAE, Faculté des Sciences, Université Mohammed 1
e , Oujda
4 Laboratory of Materials and Environment Engineering, Sidi Mohamed Ben Abdellah University, Faculty of
Sciences Fes, Morocco.
RESUME
L’utilisation des plantes en phtothérapie est connue depuis longtemps. Le Maroc en particulier,
par sa position biogéographique, est caractérisé par une diversité floristique et une population
s’adonnant depuis longtemps à des pratiques médicales traditionnelles. Cependant, si on ne peut
nier les vertus curatives d’un grand nombre de plantes, une bonne connaissance de celles-ci
(toxicité, forme d’administration, dose, mode de préparation) est indispensable pour faire un tri
dans la masse des actions attribuées aux plantes. Dans ce sens, une enquête ethnobotanique qui a
été menée auprès des herboristes de la région de Fès-Meknès, a donné des résultats pertinents et
a permis de :
• Rassembler plus d’informations sur les plantes médicinales marocaines dans un inventaire.
• Mettre en valeur ces plantes et sauvegarder certaines connaissances acquises par les
herboristes.
• Justifier l’usage de certaines plantes connues dans notre envirenement
• Ouvrir une voie de recherche sur les plantes efficaces les plus utilisées en médecine
traditionnelle.
Mots clés : Enquête ethnobotanique, Médecine traditionnelle, Plantes médicinales et
aromatiques, région de Fés- Meknès
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
165
ID211
STUDY OF THE DEVELOPMENT CYCLE OF Callosobruchus maculatus
(CEREOPTER, BRUCHIDAE) IN THE PRESENCE OF VARIOUS LEGUMINOUS
SEEDS
A. ALLALI1.2
, S. REZOUKI1.2
, B. LOUASTE3, Y. BOUCHELTA
4, N. ELOUTASSI
1,
M. FADLI2
1 Laboratory of Materials and Environment Engineering, Faculty of Sciences, USMBA, Fez
(Morocco)
2 Health and Environment Nutrition Laboratory, Faculty of Science, ITU, Kenitra (Morocco)
3 Laboratory of Biotechnology and Preservation of Natural Resources, Faculty of Sciences,
USMBA, Fez (Morocco)
4 Laboratory of Biotechnology, Faculty of Sciences, USMBA, Fez (Morocco)
ABSTRACT
In order to preserve vegetable crops and establish an effective, health and environmental control
strategy against food legume pests, we studied the biology and development cycle of an insect
Callosobrusus maculatus. as an example of pests that cause significant economic and health
damage. This work focuses on the study of biological parameters such as female fecundity, egg
fertility and larval development (emergence rate and cycle time) of Callosobrusus maculatus
grown on seed cotyledons (whole and shelled) of five types of legumes; Phaseolus vulgaris
(bean), Vigna unguiculata (cowpea), Cicer arietinum (chickpea), vicia faba (bean) and Pisum
sativum (dry pea).
The results show that female fecundity is higher in the presence of whole seeds of V. unguiculata,
C. arietinum and P. vulgaris than V. fava and P. sativum seeds, where fertility is low. Also, the
emergence rate of C. maculatus is higher on their natural hosts (V. unguiculata and C. arietinum)
than seeds not belonging to their food spectrum. In the case of P. vulgaris, all the larvae die in the
first stage, whereas in the case of P. sativum and V. faba a small number of larvae are able to
begin their post-embryonic development which lasts longer than in the natural hosts where the
duration is very short.
On the other hand, the husked seeds show that the integument causes a significant reduction in
the rate of emergence and a retardation of the development of the survivors in V. faba seeds,
whereas in P. sativum the integument only influences the duration of the biological cycle.
Key words: Callosobruchus maculatus, life cycle, legumes, seeds.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
166
ID212
DEGRE D’APPLICATION DU DEVELOPPEMENT DURABLE ET DE LA GESTION
DES DECHETS PAR LES INDUSTRIES AVOISINANTES D’OUED FES VIA UNE
ENQUETE
J. FAOUZI1, Y. METARFI
2, B. LOUASTE3, S. TLMECANI
1, M. CHAOUCH
1, N. ELOUTASSI
1,2
1Laboratoire de Génie des Matériaux et Environnement, Université sidi Mohammed Ben Abdellah, Fès, Maroc.
2Laboratoire d'Ingénierie d'Électrochimie de Modélisation et d'Environnement, USMBA, Fès-Maroc
3Laboratoire Didactique des Sciences et Innovations Technologiques, Centre Régional des Métiers de l’Education et
de la Formation, Fès, Maroc.
*Auteur de correspondance: [email protected]
RESUME
Les industries doivent répondre aux normes sur tous les niveaux, responsabilité social,
environnemental et économique pour assurer le développement durable. Les risques des déchets
industriels peuvent provoquer des effets nocifs sur le sol, la flore et la faune et porter atteinte à la
santé de l'homme et à l'environnement et par conséquent une défaillance et un déséquilibre du
développement durable. L’objectif principal de cette étude, est d’évaluer le degré de mise en
œuvre du développement durable et de vérifier le déploiement de la gestion des déchets dans les
industries approximatifs d’oued Fès. Une analyse des facteurs contextuels facilitant ou entravant
ce processus de mise en œuvre. Les industries ciblés sont diversifiés nous citons les industries
agroalimentaires, chimique et textiles. Les personnes interrogées sont représentées par les
responsables des départements, techniciens contrôleurs de qualité et ouvriers. Les données ont été
collectées par l’observation directe et les entretiens semi directifs. Les questionnaires renseignés
ont été analysé par le logiciel SPSS. Nous avons remarqué que la plus part des industriels ont
une connaissance des fondamentaux du DD, or que la mise en œuvre et l’application de ce
concept sont quasi nuls. En ce qui concerne la gestion des déchets, nous avons enregistré que la
majorité de notre échantillon sont conscients de l’impacte des effluent sur l’environnement mais
le traitement et ou la réévaluation de ce dernier est très faible. Nous avons constaté également
un réel besoin de support financier sur la gestion des déchets et les actions à entreprendre pour
appliquer le développement durable. Il est primordiale que les industrielles les hôpitaux prennent
conscience que le développement durable est un facteur de réduction des coûts en minimisant
l’utilisation de ressource naturelles, optimisation du processus de production et en valorisant les
déchets. Il permet d’anticiper les risques qu’elles soient environnementales, financiers juridiques
ou d’image.
Mots clés : Industries, développement durable, gestion des déchets, environnement, Oued Fès
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
167
ID214
ETUDE ETHNOBOTANIQUE DES PLANTES AROMATIQUES ET MEDICINALES
UTILISEES DANS LA VILLE DE FES
Y. EL ABDALI1,2
, B. LOUASTÉ2, A. BOUIA
2, M. CHAOUCH
1, N. ELOUTASSI
1
1Laboratoire de Génie des Matériaux et Environnement, Faculté des Sciences Dhar El Mahraz, USMBA, Fès
2Laboratoire de Biotechnologie, Faculté des Sciences Dhar El Mahraz, USMBA, Fès
Auteur de correspondance : [email protected]
RESUME
Le Maroc jouit d’une position privilégiée avec une façade maritime de 3446 Km de long
s’ouvrant sur la méditerranée et l’océan atlantique. Cette position géographique particulière
confère au Maroc une gamme exceptionnelle de bioclimat très varié. Tous ces facteurs accordent
au Maroc une large bande de végétation très variée notamment les plantes aromatiques et
médicinales (PAM) dont plusieurs dizaines d’espèces existant à l’état spontané ou en culture. Au
Maroc, ces plantes aromatiques et médicinales occupent une place très importante dans la
médecine traditionnelle, qui elle-même est largement employée dans divers problèmes de santé,
vu que les remèdes utilisant ces plantes sont considérés comme : moins chères, sans effets
indésirables et ont tendance à être plus employés dans les maladies chroniques telles que le
diabète, les rhumatismes, les cancers, etc. Dans le but de contribuer dans la valorisation de la
panoplie des plantes aromatiques et médicinales de notre région en médecine traditionnelle et au
laboratoire, nous avons réalisé une étude ethnobotanique auprès de 62 herboristes de la ville de
Fès, pendant le mois de mars 2018. L’enquête a été réalisée à l’aide d’une fiche remplie par
interrogation orale. Le questionnaire a été axé sur les utilisations thérapeutiques de la plante
étudiée, le nom local, les organes ou les parties de la plante utilisée, les indications
thérapeutiques, les recettes, les modes d’administration, les effets secondaires, etc. Le
dépouillement des questionnaires a mis en tête du classement Lavandula dentata en tant que la
plante la plus utilisée en médecine traditionnelle dans la ville de Fès, surtout pour le traitement
des affections digestives, et révèle que l’utilisation des plantes aromatiques et médicinales dans
cette ville est répandue chez toutes les tranches d’âge, dont les femmes représentent la majeure
partie. Les feuilles et les fleures constituent les parties les plus utilisées de ces plantes, et la
décoction constitue le mode de préparation le plus répandu.
En perspectives, ce travail doit être achevé et justifié par des tests des propriétés
physicochimiques et d’autres activités biologiques de Lavandula dentata dans le domaine
cosmétique, pharmaceutique et médical.
Mots clés : Lavandula dentata, ethnobotanique, médecine traditionnelle.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
168
ID215
SCREENING PHYTOCHIMIQUES ET EVALUATION DES ACTIVITES
ANTIOXYDANTE ET ANTIBACTERIENNE DE MATRICARIA RECUTITA
A. ZEROUAL1*
, N.ELOUTASSI1, B. LOUASTÉ
2, A.LAHKIMI
3, F. MAHJOUBI, M. CHAOUCH
1,
A. CHAQROUNE1
1Laboratoire de Génie des Matériaux et de l'Environnement(LGME). FSDM. Fez, Maroc.
2 Laboratoire de Biotechnologie, Faculté des Sciences Dhar El Mahraz, USMBA, Fès
RESUME
L’utilisation des plantes dans la médicine est une pratique très lointaine. Les Preuves écrites de
l'ingéniosité de l'homme dans l'utilisation de ces plantes pour le traitement de diverses maladies sont
présentés par les anciens Chinois, les Indiens, et les Nord-Africains. Ces plantes ont été au
commencement employées sans modification, puis comme des extraits concentrés pour augmenter leur
efficacité ou en tant que forme sèche pour les garder pendant de plus longues périodes avec moins de
dégradation. Pendant les années 1900, les gens ont appris comment isoler les composés actifs des plantes
médicinales. L’utilisation thérapeutique des extraordinaires vertus d’un grand nombre de plantes,
aromatiques, médicinales, des plantes épices et autres, pour le traitement de toutes les maladies de
l’homme est très ancienne et évolue avec l’histoire de l’humanité.
Dans le cadre de la valorisation des plantes médicinales et aromatiques de la région de taounate, on
s’intéressé à l’étude des espèces endémiques comme Matricariarecutita. La partie aérienne fraiche de
Matricariarecutita a été récoltée de la région de Taounate est soumise à une hydrodistillation à l’aide d’un
dispositif de type Clevenger et microonde.L’activitéantibactérienne deshuiles essentiellesa été évaluée sur
trois souches bactériennes .Aussi l’activité antioxydant des huiles essentielles a été évaluée par la méthode
de DPPH.Puis ont été analysé par chromatographie en phase gazeuse couplée à la spectrométrie de masse
(CG/SM), trois échantillons d’huiles essentielles de Matricariarecutita. L’Analyse chromatographique a
montré que l’huile essentielle des fleurs de Matricariarecutita récoltées au Maroc dans la région
Taounate comprend 47 composés présentant un totale de 96 .90% les composes majoritaires sont alcool
de santoline 40.70 %,Germacrene D8.90%,α-Pinene5.70%. L’huile essentielle de Matricariarecutitaa été
obtenue avec un rendement de 0.48%.Cette huile est hautement antioxydante et en même temps dotée
d’un pouvoir antibactérienne puissant contre tous les trois souches bactériennes testées (Escherichia coli
ATCC 25922, Staphylococcus aureus ATCC29213, Bacillus subtilis ATCC 3366) avec des zones
d’inhibition variant entre 12 et 35 mm.
Des études ont attribué cette forte activité à la teneur en terpènes phénoliques tel que le thymol et le
carvacrol.
Mots-clés: Activité Antioxydante, Matricariarecutita, huile essentielle, activité antibactérienne.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
169
ID216
CARACTÉRISATION PHYTOCHIMIQUE D’UN BIOMATÉRIAU «Opuntia ficus indica
»
I. ELMANSOURI1,3*
, B. LOUASTÉ1, A. LAHKIMI
2, T. ELHOUARI SALMANI
3, M. CHAOUCH
3,
H. BEKKARI1, N. ELOUTASSI
3
1 Laboratoire de biotechnologie Université Sidi Mohamed Ben Abdellah, Faculté des Sciences Fès, Maroc
2 Laboratoire d’Ingénierie d’Electrochimie de Modélisation et d’Environnement, Université Sidi Mohamed Ben
Abdellah, Faculté des Sciences Fès, Maroc.
3 Laboratoire de Génie des Matériaux et Environnement, Université Sidi Mohamed Ben Abdellah, Faculté des
Sciences Fès, Maroc.
RESUME
Le figuier de Barbarie est une plante grasse appartenant à la famille des cactées et plus
précisément au genre Opuntia. Il est cultivé au Maroc dans plusieurs régions arides et semi-
arides comme Guelmin-Sidi Ifni Khourigba et Doukkala.
La poudre extrait à partir des cladodes de l’espèce Opuntia ficus-indica a fait l’objet de ce
travail. Ses cladodes contiennent des composants bioactifs qui ont des effets bénéfiques dans les
domaines : cosmétiques, médicinales et alimentaires,ses cladodes ont été récoltés dans la région
de TAOUNATE durant deux mois.
Les analyses phytochimiques ont montré que le biomatériau est riche en sels minéraux (4.7% de
calcium ,4.6% de potassium) et en composés organiques (7,52% des tanins, 2,57 des flavonoïdes
et 0,15 des saponosides).
Le biomatériau « la poudre d’Opuntia ficus indica » est un coagulant très adaptable pour le
traitement des rejets liquides toxiques et nocifs pour la santé de l’Homme et l’animal.
Mot clés : Biomatériau, Analyse phytochimique, Opuntia ficus indica, Composés organiques,
Minéraux, coagulant.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
170
ID217
L’EVALUATION DE L’IMPACT DE L’EDUCATION AU DEVELOPPEMENT
DURABLE SUR LA TRANSITION SOCIETALE APRES COP22 AU MAROC
A. LAFTOUHI1, B. LOUASTÉ
2, A. LAHKIMI
2, M. CHAOUCH
1, N. ELOUTASSI
1
1Laboratoire Génie des Matériaux et Environnement, Faculté des Sciences Dhar El Mehraz, USMBA, Fès
2Laboratoire de Biotechnologie, Faculté des Sciences DharMahraz, USMBA, Fès, Maroc.
RESUME
L’objectif de notre travail est l’évaluation de l’impact de l’éducation au développement durable
(EDD) sur la transition sociétale au Maroc après la COP22. Pour atteindre cet objectif, nous
avons eu recours à une enquête consacrée notamment aux élèves, enseignants, étudiants et les
personnes administratifs. L’outil utilisé pour la collecte des informations nécessaires pour
répondre aux questionnements de notre problématique de recherche est le questionnaire.
Les résultats de notre questionnaire montrent que la plupart de la population marocain enquêtée,
(élèves, étudiants, enseignants et cadres administratifs) est n’ont compris le concept de DD et
l’EDD. Il s’en sort également que l’impact de l’EDD après COP22 sur la transition sociétale au
Maroc reste inaperçu et insensible. Ceci est bien mis en relief, selon les enquêtes, par la présence
d’attitudes et de comportements nuisibles vis-à-vis de l’environnement et vis-à-vis des milieux de
vie malgré que la majorité de la population enquêtés ont déterminées des activités et des actions à
finalité de DD et de l’EDD ce ci montre l’inconscience de la population marocains par
l’importance de l’environnement qui est notre habitats et notre maison . Il n y a de changements
de comportements sociétales individuels voire collectifs en faveur de la conservation de
l’environnement et la préservation des droits des futures générations, ni de la promotion des
valeurs et de l’éthique de développement durable au sein de la société marocaine, malgré les
grands efforts de l’état dans l’organisation des évènements relatifs à l’environnement notamment
la journée mondiale de la Terre à Rabat et la COP22 de Marrakech.
Mots clés : développement durable, l’éducation au développement durable, transition sociétale,
COP22
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
171
ID218
ÉTUDE DES REMEDES A BASE DE PLANTES MEDICINALES ET AROMATIQUES
DANS LA REGION DE FES MEKNES
S. TLEMCANI1,2
, B. LOUASTÉ2, BEKKARI
2, M. CHAOUCH
1, N. EL OUTASSI
1
1 Laboratoire de Génie des Matériaux et Environnement, Faculté des Sciences Dhar EL Mahraz, Université Sidi
Mohamed Ben Abdellah, Fès.
2 Laboratoire de Biotechnologie, Faculté des Sciences Dhar EL Mahraz, Université Sidi Mohamed Ben Abdellah,
Fès.
RESUME
Les plantes médicinales constituent un patrimoine précieux pour l’humanité et plus
particulièrement pour la majorité des communautés démunies des pays en voie de développement
qui en dépendent pour assurer leurs soins de santé primaires et leurs subsistances.
La médecine traditionnelle marocaine implique une multitude de recettes à base de plantes dans
le but de prévenir, guérir, soulager ou améliorer le bien-être de l’homme. Par ignorance et
manque de connaissance des personnes, les doses et les concentrations des plantes utilisées
peuvent être dépassées ce qui provoque des intoxications.
Les molécules bioactives existantes ne sont pas suffisantes, les PAM peuvent être exploré de
différentes manières afin d’en tirer les vertus, tester leur effet synergique et surmonter des
problèmes de la santé humaines.
Dans ce sens, une enquête ethnobotanique qui a été menée auprès des herboristes de la région de
Fès-Meknès, et qui a permis de:
- Réunir les informations concernant l’usage et l’intérêt thérapeutique pratiqué des PAM.
- Collecter les informations concernant la phytothérapie.
- Enquête évaluative auprès des herboristes et des utilisateurs des plantes médicinales.
Mots clés : Molécule bioactive, Plantes médicinales et aromatiques, Enquête éthnobotanique.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
172
ID221
SYNTHESE DE LIGANDS HETEROCYCLIQUES AZOTES ET ETUDE DE LEUR
ACTIVITE CATECHOLASE.
A. ZERROUKI1, M. TALEB
2, S. EL KADIRI*
1
1Lboratoire de Chimie Appliquée et environnement Faculté des Sciences, 60000 Oujda, Maroc.
2Laboratoire d’Ingénierie d’Electrochimie de Modélisation et Environnement, LIEME ,Faculté des sciences , Dhar El
Mahraz, Fès , Maroc.
E-mail : [email protected]
RESUME
Dans ce travail, nous présentons la synthèse des ligands hétérocycliques azotés 1 et 2 à base de
noyaux pyrazoliques, de tels ligands présentent divers modes de coordination, y compris la
participation du cycle benzénique en tant que groupe donneur.Lesdérivés pyrazoliques possédent
des applications diverses[1], [2] et [3].
En plus de l’activité catalytique catécholase obtenue avec ces deux ligands, d’autres applications
sont également envisageables tel que l’évaluation de leur pouvoir d’inhibition de la corrosion,
l’extraction des métaux lourds, etc.
Bibliographie
[1]. R. Touzani, S. El Kadiri, A. Zerrouki, G. Vasapollo, S. Scorrano, R. Del Sole, M. G. Manera, R. Rella. Res.
Chem. Intermed., 2012, 38, 2245.
[2]. Y. Toubi, R. Touzani, S. Radi, S. El Kadiri, J. Mater. Environ. Sci., 2012, 3(2), 328
[3]. A. Dafali,B. Hammouti, R. Touzani, S. Kertit, A. Ramdani, K. El Kacemi, Anti-corrosion Methods and
Materials, 2002,49, 96.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
173
ID221
SYNTHESE DE LIGANDS A BASE DE NOYAUX TRIAZOLIQUES POUR DES
APPLICATIONS ENVIRONNEMENTALES.
A. ZERROUKI 1, M. TALEB
2, S. EL KADIRI *
1
1Lboratoire de Chimie Appliquée et Environnement Faculté des Sciences, 60000 Oujda, Maroc.
2Laboratoire d’Ingénierie d’Electrochimie de Modélisation et Environnement, LIEME ,Faculté des sciences , Dhar El
Mahraz , Fès , Maroc.
E-mail : [email protected]
RESUME
Les composés à base de triazolesont largement utilisés comme intermédiaires dans la synthèse de
principes actifs dans les domaines agrochimique (fongicides, herbicides) et pharmaceutique.
Certains dérivés du 1, 2,4-triazole ont été synthétisés et évalués comme inhibiteurs de corrosion
des métaux, et en particulier de l'acier ; et ont montré une bonne efficacité protectrice[1], [2], [3]
et[4]
Notre contribution dans ce domaine correspond à la synthèse des ligands 1 et 2 donnés ci- après,
qui sont caractérisés par la présence des sites azotés sp2 et sp
3 donneurs d’électrons et pouvant
présenter des propriétés de complexation avec les métaux de transition ; et ainsi envisager leur
utilisation pour l’extraction des métaux toxiques et aussi évaluer leur pouvoir d’inhibition de la
corrosion.
Bibliographie
[1] H. B. Ouici, M. Belkhouda, O. Benali, R. Salghi, L. Bammou, A. Zarrouk et B. Hammouti ;Research on
Chemical Intermediates ;2014,41(7), 4617–4634
[2] H. B. Ouici. O. Benali. Y. Harek. L. Larabi .B. Hammouti. A. Guendouzi ;Research on Chemical
Intermediates ;2012, 39(7), 3089–3103
[3] H. B. Ouici. O. Benali. Y. Harek. L. Larabi .B. Hammouti. A. Guendouzi ;Research on Chemical Intermediates
2012 ,39(6), 2777-2793
[4] Ramesh, S. et Rajeswari, S. Electrochimica Acta ;2004, 49, 811-820.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
174
ID223
REMOVAL OF HEAVY METAL ION USING BIOMATERIALS
D. AZZOUNI1*
, N. ELOUTASSI1, A. LAHKIMI
2, M. CHAOUCH
1
1 Process Engineering And Environment Laboratory, Faculty Of Sciences Dhar El Mahraz, Sidi Mohamed Ben
Abdellah University, Fez, Morocco
2 Engineering, Electrochemistry, Modelling And Environmental Laboratory, Faculty Of Sciences Dhar El Mahraz,
Sidi Mohamed Ben Abdellah University, Fez, Morocco
*Corresponding Author: [email protected]
ABSTRACT:
Various adsorbents have been used to remove heavy metal ions from wastewater, particularly
those that are harmful to health and the environment. In this respect, silica gel, zeolite, algae,
chitin, chitosan and clay materials (bentonite, kaolinite and hydroxyapatites) are among the most
commonly used adsorbents.
The objective of this study was originally to recover marine by-products (shrimp shells) in order
to use them as bioadsorbent, along with other biomaterials, for the removal of chromium (VI).
In this work, we treated the adsorption kinetics, which allowed us to deduce the optimum
conditions to eliminate the maximum amount of chromium (VI) by chitosan. An adsorbed
quantity of 89.70% was reached within 30 min equilibrium time; this result shows that the
method of removal of chromium (VI) by chitosan is a reliable one.
Keywords: Adsorption, chitosan, heavy metal removal.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
175
ID224
ENVIRONMENT AND SUSTAINABLE DEVELOPMENT IN THE REGIONAL
ACADEMY OF FES-MEKNES AND THE PROVINCIAL DIRECTORATE OF FES
H. ZEKRITI1*, I. NECHAD
1, B. LOUASTE
3, M. CHAOUCH
1, N. ELOUTASSI
1
1Laboratory of Materials and Environment Engineering (LGME), Faculty of Sciences Dhar-El Mahraz, Sidi
Mohammed Ben Abdellah University, Fes, Morocco
2 Didactic Laboratory, Pedagogical and Curricular Innovation (LADIPEC), Faculty of Sciences Dhar-El Mahraz,
Sidi Mohammed Ben Abdellah University, Fes, Morocco
3 Laboratory of Biotechnology (LB), Faculty of Sciences Dhar-El Mahraz, Sidi Mohammed Ben Abdellah
University, Fes, Morocco
*Correspondence author: [email protected]
ABSTRACT
To have a sustainable management of the environment, it would be necessary to adopt
multidimensional participative approaches where all departments (social, educational, health…)
act for the achievement of the major issues of sustainable development. It is with this in mind
that we have undertaken this work. The main objective is to evaluate qualitatively and
quantitatively the degree of implementation of the concepts of environment and sustainable
development as well as decrees and laws concerning the environment in the provincial
directorate of Fez and the regional academy of Fez -Meknes at the Ministry of National
Education, Vocational Training, Higher Education and Scientific Research. This study was
conducted using surveys in the form of questionnaires addressed to officials of these two
institutions.
The results highlight major constraints in the implementation of concepts of environment and
sustainable development, difficulties in the system of environmental protection and in the
application of decrees and laws. On the other hand, so far, the approaches used in the application
of the environmental concepts in the different services are still multidisciplinary. However, the
best results have been proven by the participative and interdisciplinary approaches. Finally, in
perspective, the training of officials studied on the importance of the environment, the
application of laws and decrees and participatory and interdisciplinary approaches will be
effective in the management of the environment in the system.
Key words: Educational system, Environment, Interdisciplinarity, Participatory approach,
Sustainable development.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
176
ID225
SYNTHESIS, CHARACTERIZATION, MICROSTRUCTURE AND DURABILITY OF
FLY ASH-BASED GEOPOLYMER BINDER
G. MOUTOUAKIL1, M. EL ALOUANI
1, S. ALEHYEN
1, M. EL ACHOURI
1, E. ELHERRADI
1,
R. CHAMI1 and M. TAIBI
1
1Laboratory of Physico-Chemistry of Inorganic and Organic Materials, Higher Normal School
Mohammed V University, Rabat, MOROCCO.
* (Corresponding author: [email protected] )
ABSTRACT
The purpose of this research is to develop a process to manufacture a green geopolymer binder
using coal fly ash waste as an alternative to Portland cement. Geopolymer, an amorphous
aluminosilicate, is synthesized by mixing fly ash, a by-product of Jorf Lasfar power plant and an
alkaline activator. The latter is a mixture of sodium hydroxide and sodium silicate solution in an
appropriate ratio.
The characterization of fly ash based geopolymer was undertaken using several analytical
methods such as XRD, FTIR, FX, 29Si RMN MAS, DSC and by measuring BET isothermal
lines. Microstructure studies have been conducted using SEM - EDX and TEM Microscopies.
The microstructure of geopolymer specimens reveals the formation of a heterogonous matrix
which does not exist in the original fly ash. The formation of the matrix was due to
geopolymerization reaction occurred after mixing fly ash with the alkaline activator liquid.
The performance of the geopolymer in aggressive environments was also studied, using tests on
water absorption, acid and sulfate resistance. The Durability test to fire was also undertaken. The
Durability test results indicated excellent resistance of the geopolymer paste to fire and corrosive
action of acid and salt attack
Keywords: Geopolymer; Fly ash; alkaline activation; Durability; fire resistance; corrosion acid
resistance.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
177
ID234
Argania spinosa L. LEAVES EXTRACTS: ASSESSMENT OF TOTAL PHENOLIC
CONTENT, ANTIOXIDANT ACTIVITY AND RADICAL SCAVENGING CAPACITY
A. LFITAT1*, Y. EL ATKI
1, I. AOUAM
1, H. ZEJLI
1, S. HAMDI
2, A. GOURCH
1, B. LYOUSSI
1,
A. ABDELLAOUI1
1 Laboratory of Physiology Pharmacology and Environmental Health, Faculty of Sciences Dhar El Mahraz, Sidi
Mohamed Ben Abdellah University, B.P 1796, Atlas, Fez, Morocco.
2 Laboratory of Environmental Health, Louis Pasteur Institute of Morocco, 1 Place Louis Pasteur Casablanca
* E-mail: [email protected]
ABSTRACT
Oxidative stress is a public health issue that has significantly increased worldwide in the past
decade. It's considered as a type of the constituents aggression of the cell due to reactive
oxygen/nitrogen species. Thus, to neutralize and cope with the production of these reactive
products, the antioxidant systems are therefore endogenous and exogenous antitoxic defense
systems. In recent years, the research aims at reinforcing these endogenous defenses by natural
substances derived from plants. Among the natural exogenous antioxidants which have proven
effective against oxidative stress, there are the flavonoids or polyphenol compounds which can be
extracted from medicinal plants.
The aim of this study was to determine the total phenolic content, total flavonoids content, and
antioxidant activity of various extracts of Argan (Argania spinosa L.) tree leaves. The extracts
were obtained by soxhlet technique using three extraction solvents (water, methanol and ethyl
acetate). Antioxidant activity was evaluated by five methods, namely: DPPH•, FRAP, TAC,
inhibition of β-carotene bleaching and free radical trapping ABTS.
The yields of water, methanol and ethyl acetate extracts were 0,55%, 0,14% and 0,06%
respectively. Concerning all tests, methanolic extract showed the strongest antioxidant effect as
well as possessing the highest amounts of polyphenols and flavonoids, followed in descending
order by water and ethyl acetate extract.
Keywords: Oxidative stress; medicinal plant; antioxidant activity; polyphenols; flavonoids.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
178
ID243
TREATMENT OF THE MARGINS OF THE REGION OF FES BY ADSORPTION ON A
BIOMATERIAL CARRIED OUT BASED ON ORANGE BARK
T. ELHOUARI SALMANI1, A. LAHKIMI²
, M. TALEB
2,M. CHAOUCH
1
1* Laboratory of Materials and Environment Engineering, Sidi Mohamed Ben Abdellah University, Faculty of
Sciences Fes, Morocco.
2* Laboratory of Engineering Electrochemistry of Modeling and Environment, Sidi Mohamed Ben Abdellah
University, Faculty of Sciences Fes, Morocco.
E-mail : [email protected]
ABSTRACT
Morocco, like many countries, particularly in North Africa and the Middle East, is facing water
scarcity. It is even among the top 20 countries most affected by water stress, with only 500 cubic
meters of water per capita per year, against 2,500 cubic meters in 1960.
Liquid waste (vegetable water) resulting from the extraction of olive oil is a major problem in the
olive industry because of its polluting power which is caused by the presence of a large load of
phenolic compounds. These are toxic compounds for microorganisms responsible for water self-
purification and soil fertilization.
The aim of this work is to test the effectiveness of orange peel as an adsorbent for the retention of
phenolic compounds of vegetable water, and to study the influence of various reaction parameters
on the elimination of these micropollutants.
The physicochemical characterizations carried out beforehand of these vegetable waters revealed
a pH equal to 4.6 and a high concentration of phenolic compounds (1.2 g / l). The results
obtained after the adsorption on the biomaterial (bark of oranges) show that equilibrium is
reached after about 2 hours. The treatment pH influences the adsorption yield of the phenolic
compounds. The best yield is obtained at pH equal to 5.5. With a removal of phenolic compounds
which increases with the mass of adsorbent.
Key words: vegetable waters, micropollutants, bark of oranges, phenolic compounds.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
179
ID249
ETUDE DE LA POLLUTION PAR LES METAUX LOURDS DE SEPT ESPECES DE
POISSONS DE LA MER MEDITERRANEENNE NORD EST DU MAROC ET LEURS
RISQUES SANITAIRES POUR LES CONSOMMATEURS
S. KARIM1, A. AOUNITI
1, M. TALEB
2, F. EL HAJJAJI
2, C.BELBACHIR
1,
I.RAHHOU1B.HAMMOUTI
1
1Laboratoire de Chimie Analytique Appliquée Matériaux et Environnement .Département de chimie / Faculté des
Sciences. Université Mohamed 1er, PB
717, 60000.Oujda, Maroc.
2 Laboratoire d’ingénieurie, d’électrochimie, de modélisation et de l’environnement. Faculté des Sciences Dhar El
Mahraz. Université Sidi Mohamed Ben Abdellah.Fes .Maroc.
RESUME
La pollution par les métaux lourds est un problème d’actualité, qui préoccupe toutes les
communautés soucieuses de maintenir leur patrimoine hydrique à un certain degré de qualité.
Les métaux lourds sont peu métabolisés (à l’inverse des polluants organiques), ils peuvent donc
être transférés dans le réseau trophique et s’accumuler dans la matière vivante. Les métaux, qui
sont des constituants normaux de l’environnement à l’état de traces, Sont tous toxiques au-dessus
d’un certain seuil, Les éléments traces métalliques dits essentiels (rôle important dans les
processus biologiques ex : Cuivre, Fer et Zinc) peuvent produire des effets toxiques comme ceux
dits non essentiels (aucun rôle dans les processus biologiques ex : plomb et mercure) lorsque leur
concentration dépasse un certain seuil d’acceptabilité. Afin d'évaluer le risque sanitaire pour
l'homme et préserver l’environnement ,nous avons évalué le niveau de la pollution métallique
(Cd ,Pb,Zn,Fe,Cu,Cr et Ni) dans les organes de sept espèces de poissons (Palaemon Serratus,
Sparus aurata, Dicentrarchus labrax, Solea Vulgaris, Sardina pilchardus, Octopus Vulgaris,
Trachurus trachurus) de la mer méditerranéenne Nord-Est du Maroc entre 2014 et 2016, ainsi
nous avons évalué les risques potentiels des métaux pour la santé de l'homme via la
consommation des produits de la mer en estimant la dose journalière et le quotient du risque
cible. La concentration en différents éléments a été déterminée à l’aide d’un spectrophotomètre
d’émission atomique par plasma à couplage inductif (ICP-AES). Les résultats obtenus montrent
que le fer est l’élément le plus abondant dans tous les organes des poissons étudiés. Par ailleurs la
comparaison aux normes fixées par l’OMS, les concentrations des éléments métalliques étudiés à
l’exception du fer étaient en général dans la limite permise pour la consommation humaine et en
dessous des teneurs trouvées dans d’autres études.
Mots clés : Pollution, Métaux lourds, mer méditerranéenne, risques sanitaires, produits de la mer
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
180
ID250
L’OPTIMISATION ET LA CINETIQUE DE L’HYDRODISTILLATION
PROPORTIONNELLE DES COMBINAISONS DE TROIS PLANTES
S. EL KHARRAF1, A. FARAH
1, E. EL HADRAMI
1
1 Laboratoire de Chimie Organique, Faculté des sciences et Technique, Université Sidi Mohamed Ben Abdellah, BP :
2202 Route d’Imouzzer, Fès, Maroc.
Email: [email protected]
RESUME
La combinaison des huiles essentielles a pour finalité d’unir leurs pouvoirs d’action et d’avoir un
effet synergique très significatif vis-à-vis des micro-organismes. Ces combinaisonsconstituent
une nouvelle approche quant à la recherche des substances bioactives, capables d’assurer une
forte inhibition vis-à-vis des différents types de micro-organismes (bactéries, germes) et réduire
l’effet indésirable organoleptique, qui limite leurs utilisations comme produit de conservation en
agroalimentaire.
D’où l’intérêt de notre travail, dans lequel nous contournons cet inconvénient par une méthode
astucieuse « l’hydrodistillation proportionnelle », ce qui permet d’améliorerquantitativement et
qualitativement la performance des mélanges.
La stimulation de cette procédure innovante est exécutéesuivantun plan de mélange augmenté
centré, cependant l’étude cinétique y esteffectuée par le modèle proposé par Milojevi et
alpourl’extractionsimpleet le modèle proposé Hervas et al pour celledes combinaisons binaire et
celles tertiaires.
Les trois plantes utilisées sont la Lavandula officinalis , le Rosmarinusofficinaliset le Citrus
aurantium.
La stimulation due procède d’extraction à permet l’augmentation du rendement expérimental des
mélanges par rapport à ce qu’étaient prévus théoriquement et au même temps de diminution lu
tempsextraction et de l’énergie consommée par rapport à la distillation simple.
Mots clés : hydrodistillation proportionnelle, huile essentielle, plan d’expérience, Rosmarinus
officinalis, Lavandula Officinalis et Citrus Auranium
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
181
ID251
CONTRIBUTION A L’ETUDE DES PLANTES TOXIQUES DE LA REGION FES-
MEKNES
I. ED-DAHMANI1, B. LOUASTE
2, M. CHAOUCH
1, A. CHETOUANI
3, N. ELOUTASSI
1
1 Laboratoire de Génie des Matériaux et Environnement, Université Sidi Mohamed Ben Abdellah, Faculté des
Sciences Fès, Maroc. 2 Laboratoire de Biotechnologie, Faculté des Sciences Dhar El Mahraz, Université Sidi Mohamed Ben Abdellah
(USMBA), Fès, Maroc. 3 LCAE, Faculté des Sciences, Université Mohammed 1
e , Oujda
RESUME
Grâce à sa situation géographique (véritable carrefour entre l’Europe et l’Afrique et entre la
Méditerranée et l’Atlantique), et la diversité de son climat, le Maroc présente une grande
biodiversité d’espèces végétales. En plus des rôles pastoral, énergétique et environnemental
qu’elles jouent, les plantes ont de nombreuses utilisations (condiment, pharmacopée
traditionnelle, industries pharmaceutiques, cosmétiques et alimentaires, etc.).
A l’instar de plusieurs pays au monde, certains marocains, lorsque commencent à prendre
conscience de leurs corps, ils rejettent certains médicaments modernes à causes de leurs effets
secondaires puissants, et ils les remplace par la médecine traditionnelle, qui est répandu partout
surtout en milieu rural, du fait de la proximité et de l’accessibilité de ce type de soins, au coût
abordable et surtout en raison du manque d’accès à la médecine moderne de ces populations.
Dans le but de préciser la nature et la proportion de l’usage des plantes toxiques et de recueillir
l'ensemble des informations sur leurs effets chez les consommateurs, une enquête ethnobotanique
a été réalisée sur terrain, dans la région de Fès Meknès, sur la base d’un questionnaire destiné aux
habitants. Cette enquête a été réalisée chez la population locale de la région de Fès Meknès pour
définir les plantes à usage médicinales selon le sexe, le niveau académique des enquêtés, la
situation familiale, la profession, le mode d’utilisation des plantes, la partie utilisée et les
maladies traitées par ces plantes.
Malheureusement, dans les résultats, une grande partie de la population, les plantes sont
considérées à tort comme non dangereuses, puisqu’elles sont naturelles. Les gens les utilisent
dans des contextes très variés et de manière anarchique, non contrôlée et irrationnelle, dont la
connaissance et les impératifs de préparation et de consommation ne sont pas maitrisés, d’où le
risque d’intoxication est grave voir mortel.
Mot clés: Plantes toxiques, plantes médicinales
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
182
ID255
TOTAL PHENOLIC CONTENTS AND ANTIOXIDANT ACTIVITY OF SOME
EXTRACTS OF Thymus citriodorus L. COLLECTED FROM BERKIN, NORTH-EAST
REGION OF MORROCO
I. AOUAM1*, Y. EL ATKI
1, H. ZEJLI
1, A. LFITAT
1, S. HAMDI
2 A. GOURCH
1, B. LYOUSSI
1,
A. ABDELLAOUI1
1Laboratory of Physiology Pharmacology and Environmental Health, Department of Biology, Faculty of Sciences
DharMahraz, University Sidi Mohamed Ben Abdellah, B.P1796, Atlas, Fez, Morocco.
2 Laboratory of Environmental Health, Louis Pasteur Institute of Morocco, 1 Place Louis Pasteur Casablanca
*E-mail: [email protected]
ABSTRACT
The thymus belongs to the family Lamiacea, commonly used as spice and medicinal herb,
recognized by several pharmacological properties, such as antispasmodic, antiseptic, antibacterial
and many other bioactivities. The aim of the current study was to determine the total phenolic and
flavonoid content and to evaluate the antioxidant activity of ethanol, methanol, ethyl acetate, and
aqueous extracts of Thymus citridorus L. The antioxidant properties were measured in vitro using
six tests: Free radical scavenging activity against 2,2-diphenyl picrylhydrazyl (DPPH),
measurement of total antioxidant capacity, ferric reducing antioxidant power (FRAP), and β-
carotene assays. Total phenolic and total flavonoid contents were measured by Folin–Ciocalteu
and the aluminum chloride colorimetric test, respectively.
The water and ethanol extracts had greater antioxidant activity than the other extracts. The
aqueous extract was able to reduce the stable free radical 2,2-diphenyl-1-picrylhydrazyl (DPPH)
with an IC50 value equal to 0.14 ± 0.023 mg/ml and showed an important ferric reducing power
which was probably due to its high polyphenols content (346 ± 1.132 mg GAE/g DW).
Furthermore, flavonoids were determined at the highest level in ethanol extract. The ethyl acetate
extract has a weak antioxidant activity in all tests. These results suggest that Thymus citriodorus
L. is a rich source of natural antioxidant compounds, which can be considered as an excellent
natural food preservative.
Keywords: Thymus citriodorus L.; antioxidant activity; Polyphenol; flavonoids; 2,2-diphenyl-1-
picrylhydrazyl
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
183
ID259
INORGANIC PHOTOVOLTAIC CELLS: OPERATING PRINCIPLES,
TECHNOLOGIES AND EFFICIENCIES
Z. EL ASLAOUI1 and Y. KARZAZI
1, 2 *
1 Laboratory of Applied Analytical Chemistry Materials and Environment, Faculty of Sciences,
University Mohammed Premier, P. O. Box 4808, 60046 Oujda, Morocco
2 LSIA, National School of Applied Sciences, ENSA Al Hoceima,
University Mohammed Premier, P. O. Box 3, 32003 Sidi Bouafif, Morocco
*Corresponding author: E-mail: [email protected]
ABSTRACT
The search for new alternatives to fossil energies has pioneered the development of green
energies. Since the seventies, solar energy due to its abundance has been one of the main
renewable energies that received tremendous efforts in terms of research in the fields of
chemistry, engineering and physics. This is driven by the fact that the energy striking the surface
of the earth in one hour is enough to power the planet for an entire year. Therefore, no other
renewable energy sources have such a capacity to meet all the planet’s energy needs for the
foreseeable future. Nowadays, the majority of commercial solar cells are based on the inorganic
photovoltaic technology which utilizes a silicon wafer in either single-crystal or polycrystalline
form for light absorption and a p-n junction for charge separation. In this paper, the solar energy
is described and quantified, along with a review of semiconductor properties, photovoltaic
conversion operations and the basic inorganic photovoltaic cells technologies. Particular attention
is given to p-n junction, including losses and Shockley-Queisser limit. Crystalline silicon
photovoltaic cell, thin film technologies and multijunction photovoltaic cells are described for the
photovoltaic conversion. Finally, structure devices and cell efficiencies are examined and
discussed
Key words: Inorganic photovoltaic cells, p-n junction, semi-conductor, energy conversion
efficiency, crystalline silicon cells, thin film technology, multijunction.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
184
ID260
MODELISATION STATISTIQUE DU TAUX DU SULFATE D’ALUMINIUM : CAS DE
LA CLARIFICATION DES EAUX DE LA RETENUE DE BARRAGE BAB LOUTA
L. BOUGARNE1*, N. H. MTARFI
2, M. BEN ABBOU
1, M. EL HAJI3 & H. BOUKA
1
1Laboratoire des Ressources Naturelles. Faculté Polydisciplinaire de Taza, B.P 1223 Taza Gare, Maroc.
2Laboratoire d’Ingénierie, d’Electrochimie, de Modélisation et d’Environnemen, FSDM, Fès
3École nationale supérieure d'électricité et de mécanique (ENSEM), Route d’El Jadida. BP 8118 Oasis, Université
Hassan II, Casablanca, Maroc.
RESUME
Compte tenu de la limitation des eaux souterraines, l’accroissement démographique, le
développement socio-économique et la demande croissante en eau potable, ainsi que la
sécheresse, le Maroc, pays à climat semi-aride, s’est lancé depuis les années soixante dans un
programme de mobilisation des eaux superficielles à travers la construction de plusieurs barrages
réservoirs. Actuellement, 65% de l'eau potable est produite à partir des ressources superficielles,
principalement des retenues de barrages.
De nos jours, ces ouvrages se trouvent confrontés à divers problèmes environnementaux. Il en
résulte une altération de la qualité de l’eau qui affecte ses usages, dont notamment la production
de l’eau potable.
Le présent travail réalisé au barrage Bab Louta, qui a comme vocation principale l’alimentation
en eau potable de la ville de Taza, avait comme objectifs la détermination de la dose optimal de
coagulant à l’aide de test de coagulation floculation « Jar Test ». Ce test a un temps de retard
relativement long et ne permet pas un contrôle automatique du procédé de coagulation.
Les résultats de ce traitement ont montré que le modèle mathématique qui est significatif et qui a
satisfait les conditions de validation statistique du modèle de taux de coagulant en fonctionne des
paramètres de la turbidité et de la conductivité.
Mots clés : Barrage Bab Louta, sulfate d’aluminium, Jar Test, modélisation, clarification.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
185
ID262
INFLUENCE DE LA TEMPERATURE SUR LE COMPORTEMENT
ELECTROCHIMIQUE DES ARMATURES METALLIQUES DANS DES MILIEUX
SIMULANT LA SOLUTION INTERSTITIELLE DU BETON.
D. BENMESSAOUD LEFT*, M. ZERTOUBI, A. IRHZO, M. AZZI.
Laboratoire Interface Matériaux Environnement (LIME), Université Hassan II de Casablanca, Faculté des Sciences
Ain Chock, Maroc.
* Auteur correspondant: [email protected]
RESUME
Les édifices sont exposés au cours de l’année à des changements climatiques induisant des
variations de température. Ce paramètre pourrait avoir une influence sur le comportement des
armatures métalliques. Chose qui nous a poussé à évaluer son effet dans différents milieux
simulant la solution interstitielle du béton.
Dans cette optique, nous avons étudié l’influence de la température sur les conditions de stabilité
du film passif en absence et en présence des chlorures par des techniques électrochimiques et
d’analyse de surface. Nous avons travaillé dans une gamme de température allant de 15°C
jusqu’à 40°C.
Les résultats obtenus ont montré que l’effet de la température combinée à celui des ions chlorure
est très significatif. Elle réduit l’efficacité du film passif et provoque une déstabilisation de la
protection en améliorant le processus de la corrosion du métal. Ces deux paramètres une fois
combinés, la durabilité de la structure sera menacée, surtout que l’augmentation de la température
agit comme catalyseur pour les attaques des ces ions agressifs.
Mots Clés: Corrosion, Béton, Chlorures, Température, Armature
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
186
ID272
ETUDE PHYTOCHIMIQUE ET DOSAGE POLYPHENOLS ET FLAVONOÏDES DE
DIFFERENTS VARIETES DE Linum ustatissimum
I. NAJJARI1, M. BENIDIR
2, S. EL MASSOUDI
2, L. EL GHADRAOUI
2, F. ERRACHIDI
2,
F. OUAZZANI CHAHDI1 , Y. KANDRI RODI
1
1- Laboratoire de chimie organique appliquée, Faculté des Sciences et Technique Fès, USMBA.
2- Laboratoire d’Ecologie Fonctionnelle et Environnement, Faculté des Sciences et Techniques, USMBA, Fès.
RESUME
Les ressources naturelles constituent la principale richesse du pays, par sa liaison avec la
tradition, la culture et le mode de vie des petites populations rurales. Le Maroc accorde une
importance majeure et s'engage dans le cadre du Plan Maroc Vert à la valorisation de ces
ressources naturelles. Parmi ses ressources naturelles, les plantes aromatiques et médicinales
(PAM), comme exemple on site le lin comme plante oléagineuse, annuelle, herbacée appartenant
à la famille des Linacées. Cette famille présente 200 espècesde lin (dont 5 au Maroc), la plus
connue, la plus cultivée et la plus répandue est Linum usitatissimum.
Notre étude ambitionne à valoriser et évaluer la diversité de différents variétés de graines de lin
(Linum usitatissimum) par screening phytochimique et dosage polyphénol et flavonoides.
Le screening phytochimique a été effectué pour déterminer la composition chimique de laplante
(les alcaloïdes, flavonoïdes, tanins, saponines, stéroïdes, glycosides, résines, thiols).
Les extraits ont été quantifiés en composés phénolique et flavonoïdes respectivement par la
méthode de « Folin Ciocalteu » et ALCl3.
On a constaté que les graines de lin présentent des teneurs importantes en polyphénols et
flavonoïdes, pour les différentes variétés.
Mots clés : PAM , Linum usitatissimum, Diversité, Valorisation, Polyphénols, Flavonoïdes,
Screning phytochimique.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
187
ID277
ETUDE DE LA POLLUTION PAR LES METAUX LOURDS DE SEPT
ESPECES DE POISSONS DE LA MER MEDITERRANEENNE NORD EST
DU MAROC ET LEURS RISQUES SANITAIRES POUR LES
CONSOMMATEURS
S. KARIM1, A. AOUNITI
1, M. TALEB
2, F. EL HAJJAJI
2, C. BELBACHIR
1, I. RAHHOU
1, B.
HAMMOUTI1
1Laboratoire de Chimie Analytique Appliquée Matériaux et Environnement .Département de chimie / Faculté des
Sciences. Université Mohamed 1er, PB
717, 60000.Oujda, Maroc.
2 Laboratoire d’ingénieurie, d’électrochimie, de modélisation et de l’environnement.Faculté des Sciences Dhar El
Mahraz. Université Sidi Mohamed Ben Abdellah.Fes .Maroc.
Résumé
La pollution par les métaux lourds est un problème d’actualité, qui préoccupe toutes les
communautés soucieuses de maintenir leur patrimoine hydrique à un certain degré de qualité.
Les métaux lourds sont peu métabolisés (à l’inverse des polluants organiques), ils peuvent donc
être transférés dans le réseau trophique et s’accumuler dans la matière vivante. Les métaux, qui
sont des constituants normaux de l’environnement à l’état de traces, Sont tous toxiques au-dessus
d’un certain seuil, Les éléments traces métalliques dits essentiels (rôle important dans les
processus biologiques ex : Cuivre, Fer et Zinc) peuvent produire des effets toxiques comme ceux
dits non essentiels (aucun rôle dans les processus biologiques ex : plomb et mercure) lorsque leur
concentration dépasse un certain seuil d’acceptabilité. Afin d'évaluer le risque sanitaire pour
l'homme et préserver l’environnement ,nous avons évalué le niveau de la pollution métallique
(Cd ,Pb,Zn,Fe,Cu,Cr et Ni) dans les organes de sept espèces de poissons (Palaemon
Serratus,Sparus aurata, Dicentrarchus labrax, Solea Vulgaris, Sardina pilchardus, Octopus
Vulgaris,Trachurus trachurus) de la mer méditerranéenne Nord-Est du Maroc entre 2014 et
2016, ainsi nous avons évalué les risques potentiels des métaux pour la santé de l'homme via la
consommation des produits de la mer en estimant la dose journalière et le quotient du risque
cible. La concentration en différents éléments a été déterminée à l’aide d’un spectrophotomètre
d’émission atomique par plasma à couplage inductif (ICP-AES).Les résultats obtenus montrent
que le fer est l’élément le plus abondant dans tous les organes des poissons étudiés. Par ailleurs la
comparaison aux normes fixées par l’OMS, les concentrations des éléments métalliques étudiés à
l’exception du fer étaient en général dans la limite permise pour la consommation humaine et en
dessous des teneurs trouvées dans d’autres études.
Mots clés : Pollution, Métaux lourds, mer méditerranéenne, risques sanitaires, produits de la mer
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
188
ID278
ETUDE DE L'EFFET DES VERRES DE PHOSPHATES COMME INHIBITEUR DE
CORROSION SUR L'ACIER DOUX EN MILIEU ACIDE.
M. BOUDALIA*, M. LAOURAYED, A. BOUTAKIOUT, M. EL MOUDANE,
A. BELLAOUCHOU, A. GUENBOUR
* Laboratoire des Matériaux, Nanotechnologies et Environnement, Université MohammedV, Faculté des Sciences,
Av. Ibn Battouta, B.P. 1014, Rabat, Morocco
Email : [email protected]
RESUME
Les solutions acides sont largement utilisées dans l’industrie et dans de nombreux procédés de
synthèse industrielle, leur agressivité provoque le phénomène de la corrosion [1]. Cependant
l’utilisation des inhibiteurs de corrosion est devenue indispensable pour limiter l’attaque des
matériaux métalliques [2].Dans ce contexte, l’objectif de notre travail est d’évaluer l’effet
inhibiteur d’un composé inorganique de type verres de phosphates vis-à-vis la corrosion d’un
acier doux dans le milieu HCl 1 M à 298K. Les méthodes utilisées sont le tracé des courbes
intensité-potentiel, la spectroscopie d’impédance électrochimique et la gravimétrie. Les résultats
obtenus montrent que les verres de phosphate de niobium et de Bismuth (NBP) réduisent de
manière effective la vitesse de corrosion du l’acier dans HCl 1 M. L'examen des courbes de
polarisation sans et avec addition de (NBP) révèle que ce composé est de type mixte avec une
prédominance cathodique. Les valeurs des efficacités inhibitrices estimées par les trois méthodes
sont en bon accord. La valeur moyenne de ces efficacités E % a tendance à augmenter avec la
concentration de (NBP) et atteint une valeur maximale à des concentrations égales 250 ppm. La
variation de l'efficacité inhibitrice moyenne en fonction de log C indique que l'adsorption de cet
inhibiteur suit le modèle de l'isotherme de Langmuir.
[1] : J. Aljourani, K. Raeissi, M.A. Golozar, Corrosion Science, 51 (2009) 1836.
[2] : H. Habeeba, H.M. Luaibi R.M. Dakhil , A.A. Kadhum , T.S. Gaaz.Results in Physics,8
(2018) 1260.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
189
ID279
ELECTROCHEMICAL BEHAVIOR OF TRIAZOLE DERIVATIVES ON MILD STEEL
IN ACIDIC SOLUTION
A. BOUTAKIOUT*, M. BOUDALIA, M. LAOURAYED, A. BELLAOUCHOU, A. GUENBOUR
Laboratory of Electrochemistry,Corrosion and Environment, Faculty of science, Rabat, Morocco
Email : [email protected]
ABSTRACT
The problem of corrosion is prevalent in most industries and it account for a huge portion of
revenue spent on maintenance due to corrosion damage [1]. Hydrochloric acid is generally used
for the removal of undesirable scale and rust in several industrial processes [2]. Thus,
inhibitors are one of the most convenient methods for protection against corrosion. In this
context our investigation is focused in the effect of Triazoles as corrosion inhibitors for mild
steel in hydrochloric acid solution. The inhibition efficiency depended on the concentration and
type of the triazoles. The experimental results reveal that the compound has a significant
inhibiting effect on the corrosion of steel in hydrochloric solution. It also shows good corrosion
inhibition at higher concentration of HCl. Potentiodynamic polarization studies have shown that
the compound acts as a mixed-type inhibitor retarding the anodic and cathodic corrosion
reactions with predominant effect on the cathodic reaction. The inhibition efficiency exceeded
96%. Inhibitor with highest performance was evaluated at different temperature and inhibitor
concentrations. Inhibition efficiency decreased with rise in temperature, this corresponded to
surface coverage of the metal by the inhibitor. Changes in impedance parameters (Rt and Cdl) are
indicative of the adsorption of inhibitor on the metal surface, leading to the formation of a
protective film which grows with increasing exposure time. The adsorption of this investigation
was found to follow Langmuir isotherm. The negative value of the free energy of adsorption,
Gads ensures the spontaneity of the adsorption process. SEM and EDS investigations confirmed
the adsorption of inhibitor on mild steel surface.
Key words: Corrosion, Triazole derivatives, adsorption, acidic solution
[1] : H. Jafari, K. Sayin, J. Taiwan Inst. Chem. Eng. 56 (2015) 181.
[2] : A. Biswas, S. Pal, G. Udayabhanu, Appl. Surf. Sci. 353 (2015) 173
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
190
STANDS
D'EXPOSITION
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
191
STAND 1
IN SITU’SERS EFFECT STUDIES WITH SCREEN-PRINTED ELECTRODES AND A
COMPACT RAMAN SPECTROELECTROCHEMICAL INSTRUMENT
L. AKROUR, D. M. YERGA, A. P. JUNQUERA, D. H. SANTOS, P. F. BOLADO
*
DropSens, S.L., Edificio CEEI, Parque Tecnológico de Asturias, 33428 Llanera, Asturias, Spain
ABSTRACT
UV-VIS, NIR and Raman Spectroelectrochemistry techniques can be used as ‘in situ’ and real
time characterization and quantification techniques. These are powerful techniques since more
complete and specific information is obtained with optical and electrochemical signals recorded
simultaneously. However, the main current disadvantages are related to complex experimental
setup where two analytical instruments (spectrometer and potentiostat) controlled by two
different software should be triggered and usually a home-made spectroelectrochemical cell is
used [1-3]. The purpose of this study is to introduce a new compact and portable Raman
spectroelectrochemical instrument controlled by one software in combination with screen printed
electrodes. The new instrument integrates a 785nm laser, a Raman spectrometer and a
potentiostat/galvanostat fully synchronized in the same box. A Raman probe and a Raman
spectroelectrochemical cell are used under optimized conditions together with Screen Printed
Electrodes (SPEs). These miniaturized strips where the three electrodes of the electrochemical
cell are printed together in the same alumina substrate are easy to handle, do not need to be
pretreated previously to be used and require a low volume of solution (around 40 µl) [4-5].Time
resolved and quantitative measurements were developed on SPEsusing different molecules such
as ferricyanide, ruthenium bipyridine, thionine or the active pharmaceutical ingredient called
naratriptan.On the other hand, silver, gold and copper based SPEs are shown as cost effective
Surface Enhanced Raman Spectroscopy (SERS) substrates. The complete experimental setup is
demonstrated to be easy to handle in comparison to the use of conventional electrodes and allows
fast, in situ, real time and time resolved Raman Spectroelectrochemical measurements.
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
192
Figure 1: Raman spectra for different concentrations of Ruthenium bipyridine in 0.1M KCl
solution using a silver screen printed electrode as
a SERS substrate
Recent Publications
1. C.Zong, C-J.Chen, M.Zheng, D-Y.Wu, B.Ren (2015), Transient Electrochemical Surface Enhanced
Raman Spectroscopy: a millisecond time resolved study of an electrochemical redox process,
JACS, 137, 11768-11774.
2. L.Zhao, J.Blackburn, C.L.Brosseau (2014), Quantitative detection of uric acid by electrochemical-
surface enhanced raman spectroscopy using a multilayered Au/Ag substrate, Anal.Chem., 87, 441-
447.
3. N.Peica, W.Kiefer (2008), Characterization of indigo carmine with surface enhanced resonance
raman spectroscopy (SERRS) using silver colloids and islan films, and theoretical calculations,
J.Raman.Spectrosc., 39, 47-60.
4. P.Fanjul-Bolado, D.Hernández Santos, P.J.Lamas-Ardisana, A.Martín Pernía, A-Costa García
(2008), Electrochemicalcharacterization of screen-printed and conventionalcarbon paste electrodes,
Electrochimica Acta, 53(10), 3635-3642.
5. P.Fanjul Bolado, P.Queipo, P.J.LamasArdisana, A.CostaGarcía (2007), Manufacture and evaluation
of carbon nanotube modified screen-printed electrodes as electrochemical tools, Talanta, 74, 427-
433
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
193
STAND 2
ANALYSES ELECTROCHIMIQUES
Pierre-Julien VOISIN, directeur commercial HTDS
HI – TECH DETECTION SYSTMS
HTDS propose en exclusivité les instruments des marques pionnières en électrochimie et étude
des matériaux : PRINCETON APPLIED RESEARCH, SIGNAL RECOVERY (anciennement
EG&G pour chacune) et SOLARTRON ANALYTICAL (Groupe AMETEK) et PalmSens.
Il s’agit d’une gamme complète d’instruments, logiciels, accessoires et appareillages
complémentaires associés qui sont dédiés à la mesure de haute précision des propriétés
électriques et électrochimiques de matériaux et cellules, incluant les mesures de spectroscopie
d’impédance électrochimique (SIE).
Les produits principaux : Stations « ModuLab » pour la Recherche en électrochimie et sur les
matériaux, Analyseurs de réponses en fréquences et Lock-in Amplifiers, Potentiostats/
Galvanostats/ FRA mono et multivoies, Systèmes d’Imagerie de surfaces à sondes locales
(SECM, LEIS, SVET, SVET, SKP) et Analyseurs/cycleurs de batteries.
Ces solutions intéressent principalement la Recherche Fondamentale/Analytique et industrielle
portant sur les biomatériaux, les capteurs, la corrosion (inhibiteurs et revêtements), les piles à
combustible, les batteries et les super-condensateurs, ainsi que les diélectriques, les systèmes
d’affichage, les conducteurs ioniques, les électrolytes solides, les semi-conducteurs, les
piézoélectriques et ferroélectriques, les MEMs, les nanomatériaux, les polymères, les cellules
solaires et autres dispositifs photovoltaïques.
Keywords:. Lock in, potentiostrats/galvanostats, analyseurs de batteries
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
194
TABLE DE MATIERE
MOT DU COMITE D’ORGANISATION 1
REMERCIEMENTS 2
COMITE D'HONNEUR 3
COMITE D'ORGANISATION 3
COMITE SCIENTIFIQUE 3
BIOGRPHIES & RÉSUMÉS DES CONFÉRENCES 4
COMMUNICATIONS ORALES & AFFICHEES
Thèmes 1 : Corrosion et Traitements de Surfaces & Electrochimie
Analytique et Moléculaire 24
Nom Et Prénom ID Type Email Page
A. Bouoidina 101 CO_2CA [email protected] 25_133_134
H. Chahmout 102 CO [email protected] 26
M. Ouakki 103 2CO [email protected] 27_28
A. El Guerraf 104 CO [email protected] 29
N. Khemmou 106 CO [email protected] 30
S. Sair 108 CO [email protected] 31
O. Mouadili 109 CO_CA [email protected] 32_135
A. Radi 110 CO_CA [email protected] 33_136
A. Hrioua 112 CO [email protected] 34
E. Rahou 115 CO [email protected] 35
D. Zahri 116 CO [email protected] 36
A. Benikdes 118 CO [email protected] 37
A. Chraka 119 CA [email protected] 137
H. El Ouafy 121 CO [email protected] 38
A. El Mansouri 122 CO [email protected] 38
N. Benseddik 123 CO [email protected] 40
S. Hassi 126 CO [email protected] 41
R. Salim 129 CO_CA [email protected] 42_138
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
195
N. Achnine 130 2CO_CA [email protected] 43_44_139
El. Ech-Chihbi 131 CO_CA [email protected] 45_140
C. Hejjaj 132 CO [email protected] 46
G. Ghenimi 140 CO [email protected] 47
A. El Fazazi 142 CO [email protected] 48
N. Touba 143 CO [email protected] 49
A. Hbika 144 CA [email protected] 141
H. Rahmani 145 CO_CA [email protected] 50_142_143
A. Saady 146 CO_CA [email protected] 51_144
B. Khalidou 148 CO [email protected] 52
B. Youbi 149 CO [email protected] 53
M. Khattabi 151 2CO [email protected] 54_55
S. Mouuaamoun 152 CO [email protected] 56
J. Lazrak 153 CO_CA [email protected] 57_145
S. A. Mrani 154 CO_CA [email protected] 58_146
G. Yammouri 155 CO [email protected] 59
A. Amine 156 CA [email protected] 147
N. Arrousse 157 CO_CA [email protected] 60_148
I. Chabbo 158 CA [email protected] 149
H. About 159 CA_CO [email protected] 61_150
A. Elhattak 160 CO [email protected] 62
H. El Aadad 164 CO [email protected] 63
S. El Harti 166 2CA [email protected] 151_152
Z. Quebbou 167 CO [email protected] 64
H. Mokhlis 169 CO [email protected] 65
S. Tazi 171 CO [email protected] 66
M. Ait Himi 172 CO_CA [email protected] 67_153
N. Ferraa 173 CA [email protected] 154
A. El Mazyani 177 CO [email protected] 68
F. Baragh 178 CO [email protected] 91
S. Skal 179 CO [email protected] 69
Y. El Aoufir 180 CO [email protected] 70
Y. Kerroum 181 CO [email protected] 71
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
196
H. El Boulifi 184 CO [email protected] 72
M. Laourayed 186 CA_CO [email protected] 73_155
H. Laaroussi 187 CO_CA [email protected] 74_156
M. Oubaaqa 188 CO [email protected] 75
M. Tourabi 189 CO_CA [email protected] 76_157
S. Aftimi 192 CO [email protected] 77
F. El-Hajjaji 193 CO [email protected] 78
M. El Azzouzi 194 CO_CA [email protected] 79_158
A. Thoume 195 CO [email protected] 80
R. Aboulayt 196 CA [email protected] 159
M. Galai 197 2CO [email protected] 81_82
A. Chami 200 CO [email protected] 83
Thèmes 2 : Chimie Analytique et Environnement
Nom Et Prénom ID Type Email Page
S. Naamane 201 CO [email protected] 92
Z. Majbar 202 CO [email protected] 93
A. BennaniKarim 203 CO [email protected] 94
M. Sabbahi 205 CO [email protected] 95
F. El Madani 206 CO [email protected] 96
R. Mahmoud 207 CO [email protected] 97
N. Eloutassi 208 CO [email protected] 98
H. Mikdam 209 CO [email protected] 98
G. Beniaich 210 CO_CA [email protected] 100_163
S. Rezouki 211 CO_CA [email protected] 101_164
J. Faouzi 212 CO_CA [email protected] 102_165
Y. El Abdali 214 CO_CA [email protected] 103_166
A. Zeroual 215 CO_CA [email protected] 104_167
I. Elmansouri 216 CO_CA [email protected] 105_168
A. Laftouhi 217 CO_CA [email protected] 106_169
S. Tlemcani 218 CO_CA [email protected] 107_170
B. Louaste 219 CO [email protected] 108
S. EL Kadiri 221 2CA [email protected] 171_172
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
197
K. Lahlou 222 CO [email protected] 109
D. Azzouni 223 CA [email protected] 173
H. Zekriti 224 CO_CA [email protected] 110_174
G. Moutawakil 225 CA [email protected] 175
A. Ejbouh 230 CO [email protected] 111
A. El Abdouni 232 CO [email protected] 112
M. Naciri 233 CA [email protected] 160
A. Lfitat 234 CA [email protected] 176
Y. El Atki 238 CO [email protected] 113
F. Titchou 240 CO [email protected] 114
H. Zejli 242 CO [email protected] 115
T.E. Salmani 243 CO_CA [email protected] 116_177
Y. Metarfi 245 CO [email protected] 117
El. Loukili 246 CO [email protected] 118
F.Z. Bouaich 247 CO [email protected] 119
O. M’hamdi 249 CO [email protected] 120
S. El kharraf 250 CO_CA [email protected] 121_178
I. ED-Dahmani 251 CA [email protected] 179
A. Marsoul 252 CA_CO [email protected] 122
I. Aouam 255 CA [email protected] 180
J. Sehli 256 CO [email protected] 123
Z. El aslaoui 259 CO_CA [email protected] 124_181
M. Benabbou 260 CO_CA [email protected] 125_182
M. Zertoubi 262 CA [email protected] 183
K. Mssyah 264 CO [email protected] 126
M. Beniken 266 2CO [email protected] 84_85
M. Driouch 268 2CO [email protected] 86_87
Z. Mdehheb 269 CO [email protected] 126
O. Senhaji 270 CO [email protected] 88
M. Znini 271 CA [email protected] 161
I. Najjari 272 CO_CA [email protected] 128_185
A. Omor 273 CO [email protected] 129
R. Ouafi 274 CO [email protected] 130
10
ème Rencontre Nationale d’Electrochimie, 18 & 19 Avril 2019 IFRANE - Maroc
Laboratoire d’ingénierie d'Electrochimie, de Modélisation et d'Environnement. FSDM - USMBA
B.P. 1796 Atlas, Fès, Maroc Tél. 0661093075. E-Mail: [email protected]
198
S. Karim 277 CA [email protected]
M. Boudalia 278 CA [email protected] 186
A. Boutakiout 279 CA [email protected] 187
E. Orenibi 280 CO [email protected] 131
M. Yamni 290 CO [email protected] 88
M. Alahiane 294 CA [email protected] 162
Stands d’exposition
L. Akrour Stand 1 [email protected] 188
P.J. Voisin Stand 2 [email protected] 190
Participants sans communication
Z. Aribou 105 P [email protected]
A. Achatei 263 P [email protected]
S. elghachtouli 257 P [email protected]
A. Ech-Chebab 107 P [email protected]
U.H. Ojembe 281 P [email protected]
M. Aadjour 111 P [email protected]
M. El Mouden 113 P [email protected],
K. Dahmani 114 P [email protected]
A. Sqalli Stand 1 SCOMEDIC
F. Belleteix Stand 1 SCOMEDIC
REMERCIEMENTS
L’électrochimie, une composante essentielle de
la chimie moderne, connait un essor
considérable au niveau de l’investigation. La
qualité de la caractérisation et de
l’interprétation des phénomènes étudiés permet,
de nos jours, d’explorer scientifiquement des
domaines qui étaient autrefois difficiles à
aborder. L’électrochimie approfondit certains
phénomènes physico-chimiques afin de mieux
comprendre les lois et les mécanismes qui les
régissent.
Comme pour les précédentes éditions de la
Rencontre Nationale d’Electrochimie, nous
allons traiter les thématiques suivantes :
• L’Electrochimie Analytique et
Moléculaire ;
• La Corrosion et Traitements de Surfaces ;
• La Chimie Analytique et Environnement ;
• Les Nanomatériaux et Applications.
La diversité de ces thématiques étudiées,
permet de résoudre les problèmes d’ordre
environnemental, industriel, économique, etc.
Cette rencontre, qui se tient régulièrement tous
les deux ans depuis 1998 et qui est devenue un
rendez-vous scientifique incontournable, réunit
d’éminents chercheurs, industriels et experts
d’Institution Nationales et Internationales.
Nous avons le grand honneur d’organiser
l’édition 2019 au centre des conférences Al-
Akhawayn – Ifrane (18-19 Avril).
A cette occasion, nous tenons à remercier
Messieurs les Présidents, Messieurs les Doyens,
Messieurs les Vices Doyens des différentes
universités soutenant cette manifestation
nationale.
Nous remercions également les chercheurs et
les Doctorants qui ont répondu favorablement à
notre appel. Merci d’être venues si nombreux et
parfois de si loin de toutes les Universités du
royaume et de l’international afin de participer à
cet important événement.
Cette rencontre, honorée par la présence de
professeurs et de chercheurs émérites dans le
domaine de l’électrochimie et ses applications,
sera organisée sous forme de :
3 conférences plénières
6 conférences thématiques
110 communications orales
70 communications par affiches
Pr. TALEB Mustapha
University of Sidi Mohammed Ben Abdellah,
Faculty of Sciences, Department of Chemistry,
PO Box: 30003
Fez, Morocco
Tel.: +212-6-61093075
Fax: +212-5-35642500
Director of Laboratory of engineering,
Electrochemistry, Modelization and Environment
(LIÉME), Faculty of sciences / University of Sidi
Mohammed Ben Abdellah, Fès, Morocco. Ph.D.
degree in Electrochemistry from the University
of Mohammed Premier-Oujda, Morocco,
published more than 110 papers in international
journals and presented 600 communications.
reviewer at several international journals.
10ème Rencontre Nationale
d’Electrochimie (RNE’10)
18-19 Avril 2019
Au Centre de Conférences
Al-Akhawayn - Ifrane – Maroc
Sous le thème
Electrochimie, Environnement
et Développement Durable