cv muhammad afi hassan 2015

13
RESUME MUHAMMAD AFI BIN HASSAN 1 MUHAMMAD AFI BIN HASSAN No 14, Jalan Asli 8, Taman Pasir Putih, 81700 Pasir Gudang. Johor Darul Ta’azim Email :[email protected] OBJECTIVE A mechanical position with diploma in Mechanical Engineering in Manufacturing. As a QC Inspector to make quality is the BEST in the part of your live!. And to gain more experience and learn a new skills. PERSONAL PARTICULARS Gender : Male I/C No : 880910-23-5617 Date of birth : 10 September 1988 Age : 27 years old Place of birthday : Hospital Sultanah Aminah Johor Bharu Marital Status : Married Health : Good Health Nationality : Malaysia Interest : Adventure Game Phone : 017-7685696 EDUCATION 1) Jan 2006 - Dis 2009 Politeknik Johor Bahru, Diploma in Mechanical Engineering Pasir Gudang, Johor (Manufacturing). 2) 2004 2005 Sek. Men. Teknik Muar, Grade in Sijil Pelajaran Malaysia Muar,Johor (SPM).

Upload: muhammad-afi-hassan

Post on 13-Apr-2017

186 views

Category:

Documents


0 download

TRANSCRIPT

RESUME MUHAMMAD AFI BIN HASSAN

1

MUHAMMAD AFI BIN HASSAN No 14, Jalan Asli 8,

Taman Pasir Putih,

81700 Pasir Gudang.

Johor Darul Ta’azim

Email :[email protected]

OBJECTIVE

A mechanical position with diploma in Mechanical Engineering in Manufacturing. As a

QC Inspector to make quality is the BEST in the part of your live!. And to gain more

experience and learn a new skills.

PERSONAL PARTICULARS

Gender : Male

I/C No : 880910-23-5617

Date of birth : 10 September 1988

Age : 27 years old

Place of birthday : Hospital Sultanah Aminah Johor Bharu

Marital Status : Married

Health : Good Health

Nationality : Malaysia

Interest : Adventure Game

Phone : 017-7685696

EDUCATION

1) Jan 2006 - Dis 2009

Politeknik Johor Bahru, Diploma in Mechanical Engineering

Pasir Gudang, Johor (Manufacturing).

2) 2004 – 2005

Sek. Men. Teknik Muar, Grade in Sijil Pelajaran Malaysia

Muar,Johor (SPM).

RESUME MUHAMMAD AFI BIN HASSAN

2

ATTENDED COURSE

1) June 2012

Johor Skill Development Center Welding Inspector (CSWIP 3.1)

(PUSPATRI)

2) April 2010

Johor Skill Development Center Welding Inspector (PCN Level 2)

(PUSPATRI)

WORK EXPERIENCE

1) Company Name : Flextronics (Penang) Sdn Bhd

Position Title : QA Asst Engineer (Assembly)

Industry : Manufacturing

Date Joined : June 2014 ~ Present

DUTIES AND RESPONSIBILITIES

• To ensure and monitor Qc Inspector (IPQC & OQA) carry out activity during and

after assembly

• Ensure production follow spec as a client requirement

• Prepare release package for each new model including result for each testing.

• Prepare checklist for Qc Inspector (IPQC & OQA) for their inspections referenced.

• Prepare QSI (Quality Standard Inspection) for each models including Sub-Assembly

and Main Assembly.

• Ensure incoming part in spec and no reject issues (painting and molding)

• Prepare Quality Alert for reference Trainer and Production especially operator to

follow the sequence that Engineer Process provided.

• Ensure jig or tools for testing are in good condition and inspect as follow

requirement from client.

• Prepare documentation for all finding either from client or internal and come out

with a methods.

• Ensure zero market claims.

RESUME MUHAMMAD AFI BIN HASSAN

3

2) Company Name : Seagull Engineering Sdn Bhd.

Position Title : QA/QC Inspector (WELDING)

Industry : Oil & Gas Fabrication

Date Joined : August 2010 ~ Febuary 2014

DUTIES AND RESPONSIBILITIES

• To carry out all QC Inspection in welding activities as directed by QC Head or

Manager in accordance with company’s QA/QC procedures.

• To carry out all inspection receiving material before production.

• To ensure and monitor welding activity during fabrication and visual after welding.

• To ensure and follow up the welding sequence.

• To perform all QC/Welding inspection of the works at site / shop as required.

• To coordinate with NDT team or subcontractor to perform NDT timely and as per

specification.

• To ensure that all fabrications work are performed to the quality as per specification.

• To ensure that all QC activities are performed timely with no delay to production.

• To perform any other duties that may be assigned to you by your superior /

management from time to time.

JOB RESPONSIBILITIES ( IN SEQUENCE )

• To interpreted fabrication drawing. (G.A., nozzle, internal, external detail).

• Perform material receiving inspection such as plate, flanges, forging, fitting, pipe,

tube sheet (heat exchanger), baffle plate (heat exchanger).

• Ensure all the material appearance such as width, length, thickness, stamping @

marking and heat number are available and comply with drawing

• Prepare line summary check list such as marking date, fit up inspection, visual after

welding date and clarify the joint number in order to monitor the progress in

workshop.

• Perform fit up inspection during pre-fabrication especially for longitude seam,

circumference seam, flange to nozzle neck joint, pipe joint, nozzle to shell and

attachment to pressure part joint. Ensure the alignment (hi-low), bevel preparation

and gap as per drawing fabrication.

• Monitor welding activity during fabrication and make sure all the document is

available and approved such as WPS and weld map before start the inspection.

• To monitor welding process such as SMAW, GTAW, FCAW, SAW and control the

welder, To ensure that only qualified welder to perform welding work during

production activity.

• Perform visual inspection after completed weld. Ensure that the reinforcement weld

is achieved as per fabrication drawing. Also determine defect such as spatter,

undercut, under fill and mark clearly so that remedial action can be taken.

• Coordinate with NDT department to perform examination such as PT, MT, and RT

after welding completed and visual inspection satisfactory. In accordance to ITP to

ensure the examination had performed to the specified joint.

• To understand the method of NDT and make sure it is done correctly.

• Review the NDT report and ensure it is tally with request and compile to the MDR.

RESUME MUHAMMAD AFI BIN HASSAN

4

• Perform final inspection and final dimensional as a final inspection for QC inspector

before proceed to PWHT or hydrostatic test.

• To coordinate with:

• QA engineer (in order to implement all the related procedures).

• Design Engineer (Technical wise, drawing).

• Production (material, schedule).

• Purchasing (mill certificate, P.O and D.O).

PROJECT INVOLVED

1. Year : September 2013 to Febuary 2014

Job Number : 7.13M004

Client : TNB / Andritz / MMHE-ATB

Project Involved : Ulu Jelai Hydroelectric (Steel Liner) Project

Project in MMHE-ATB Snd Bhd

2. Year : August 2013 to December 2013

Job Number : 7.13S002

Client : PETRONAS / PROCESS GROUP / MMHE-ATB

Project Involved : Petronas Skid Piping FLNG Project

A-42-101- Producer Water Treatment Package

A-42-102- Desanding Package

Project in MMHE-ATB Snd Bhd

3. Year : April 2013 to December 2013

Job Number : 7.12S052

Client : PETRONAS / MHI / MMHE-ATB

Project Involved : Sabah Ammonia Urea (SAMUR) Project

C-58-41- Demi Waste Water Stripping Tower

Project in MMHE-ATB Snd Bhd

4. Year : December 2012 to December 2013

Job Number : 7.12M049

Client : PETRONAS / MHI / MMHE-ATB

Project Involved : Sabah Ammonia Urea (SAMUR) Project

C-20-01- HP Scubber

C-20-02- LP Scubber

C-20-04- Stripper

C-21-01- Process Condensate

C-37-01- Stripping Tower

Project in MMHE-ATB Snd Bhd

RESUME MUHAMMAD AFI BIN HASSAN

5

5. Year : December 2012 to December 2013

Job Number : 7.12M050

Client : PETRONAS / MHI / MMHE-ATB

Project Involved : Sabah Ammonia Urea (SAMUR) Project

V-16-02- Syn 2nd

Intercooler Separator

V-16-03- Syn Gas After Separator

V-18-01- Ammonia Separator

V-18-04- Purge Gas Separator

Project in MMHE-ATB Snd Bhd

6. Year : June 2012 to December 2012

Job Number : 7.12M039Q

Client : PETROFAC / MMHE-ATB

Project Involved : Cendor Phase 2 – FPSO Project for PETROFAC

V4101-Hot Oil Expansion Vessel

V4102-Hot Oil Drain Down Vessel

V4301-Fuel Gas Discharge Scrubber

A2001/2002-V01- 1st stage Suction Scrubber Train 1

A2001/2002-V02- 2nd stage Suction Scrubber Train 2

Project in MMHE-ATB Snd Bhd

7. Year : July 2012 to November 2012

Job Number : 7.11M035L

Client : PETROFAC / MMHE-ATB

Project Involved : Cendor Phase 2 – FPSO Project for PETROFAC

E1001-Inlet Heater

E1002-Interstage Heater

Project in MMHE-ATB Snd Bhd

8. Year : Sept 2012 to November 2012

Job Number : 7.12M041S

Client : PETROFAC / MMHE-ATB

Project Involved : Cendor Phase 2 – FPSO Project for PETROFAC

LP FWS Pig Receiver – 4 set

(V1004, V1005, V1006 & V1007)

Project in MMHE-ATB Snd Bhd

9. Year : July 2012 to October 2012

Job Number : 7.12S042T

Client : PETROFAC / MMHE-ATB

Project Involved : Cendor Phase 2 – FPSO Project for PETROFAC

81-V5505- DryAir Receiver

Project in MMHE-ATB Snd Bhd

RESUME MUHAMMAD AFI BIN HASSAN

6

10. Year : March2012 to July 2012

Job Number : 7.11S032I

Client : EXXON / MMHE-ATB

Project Involved : TAPIS EOR and Rejuvenation Project &

TELOK GAS Development Project.

Launcher & Receiver

(V370, V371, V372, V373, V374, V375, V376, V377,

V378, V382)

Project in MMHE-ATB Snd Bhd=

11. Year : February 2012 to June 2012

Job Number : 7.11M030G

Client : PETROFAC / MMHE-ATB

Project Involved : Block PM304 Cendor Phase-2 Development Project for

PETROFAC ( Vessel )

V1001- HP Production Separator

V1002- LP Production Separator

V3101-Crude Degasser

V4601-HP Flare Knock-out Drum

V4701-LP Flare Knock-out Drum

Project in MMHE-ATB Sdn Bhd

12. Year : August 2010 to February 2012

Job Number : 7.10M023Z

Project Involved : Tocoma Water Gate

CTA-2002, 2003, 2004, 2008

CMA-2001, 2002, 2003, 2004, 2005

Project in MMHE-ATB Sdn Bhd

13. Year : March 2011 to July 2011

Job Number : 7.10M026C

Project Involved : Spillway Radial Gate

30062-D-0704, 0705, 0706_rb1, 0708, 0709, 0721

Project in MMHE-ATB Sdn Bhd.

14. Year : November 2010 to March 2011

Job Number : 7.10S025B / S.10S025B

Project Involved : Theun Hinboun Expansion Project ( Steel Liner )

30062-D-1503, 1518, 1519, 1520, 1521, 1522, 1604, 1609

Project in MMHE-ATB Sdn Bhd.

RESUME MUHAMMAD AFI BIN HASSAN

7

OTHER SKILL

Proficient in computer Microsoft Word, Power Point and Excel.

Familiar in AutoCAD drawing.

Proficient in engineering mechanical. Knowledge in welding and welding procedure

Knowledge in Visual Inspection and type of defects

Basic knowledge in NDT

Full clean driving licence (B2 & D)

Ability to handle all inspection material like Welding Gauge, Thickness Gauge

(UT), Clamp Meter, Laser Distance and Hi-Low Gauge

PERSONEL CHARACTERISTIC

High social engineering skill; able to deal with various levels of people.

Adaptable to new environment in a short period of time and are able to work extra time

when necessary.

Dedicated work ethic – flexible in schedule – goal oriented – self-guided.

Have the flexibility of either working indoor or outdoor (out station when required).

Work effectively, independently or as a part of a team.

LANGUAGE PROFICIENCY

SPOKEN

1. Language : Malay Overall : Excellent

2. Language : English Overall : Intermediate

WRITTEN 1. Language : Malay Overall : Excellent

2. Language : English Overall : Intermediate

REFERENCE

Mr. Mohd Abdul Gani Bin Harun

Coordinator QC Inspector SEAGULL ENGINEERING Sdn. Bhd.

Tel : 016-7828468

Mr. Md Najib HJ. Razali

QA/QC Inspector SAPURA KENCANA PETROLEUM

Tel : 019-6088478

Mr. Wan Haziman

NDT Inspector MMHE-ATB Sdn. Bhd.

Tel : 017-6850150

RESUME MUHAMMAD AFI BIN HASSAN

8

RESUME MUHAMMAD AFI BIN HASSAN

9

RESUME MUHAMMAD AFI BIN HASSAN

10

RESUME MUHAMMAD AFI BIN HASSAN

11

RESUME MUHAMMAD AFI BIN HASSAN

12

RESUME MUHAMMAD AFI BIN HASSAN

13