ARTICLES dans des revues INTERNATIONALES – Comité de lecture – 2014

1. AMODEO J., DEVINCRE B., CARREZ P., CORDIER P. ‘Dislocation reactions, plastic anisotropy and forest strengthening in MgO at high temperature’, Mechanics of Materials 2014, Volume 71, pp 62-73

2. BARDEL D., PEREZ M., NELIAS D., DESCHAMPS A., HUTCHINSON C.R., MAISONNETTE D., CHAISE T., GARNIER J., BOURLIER F. ‘Coupled precipitation and yield strength modelling for non-isothermal treatments of a 6061 aluminium alloy’, Acta Materialia 2014,Volume 62, pp. 129–140

3. BOUTERF A., ROUX S., HILD F., VIVIER G., BRAJE X., MAIRE E., MEILLE S., ‘Damage law identication from full eld displacementmeasurement: Application to four-point bending test for plasterboard’ European Journal of Mechanics - A/SOLIDS juin 2014 soumis

4. BOUVILLE F., MAIRE E., DEVILLE S. Self-assembly of faceted particles triggered by a moving ice front Langmuir Volume 30, (29), 2014, pp. 8656-8663

5. CAO T.-S., MAIRE E., VERDU C., BOBADILLA C., LASNE P., MONTMITONNET P., BOUCHARD P.-O. ‘Characterization of ductile damage for a high carbon steel using 3D X-ray micro-tomography and mechanical tests - Application to the identification of a shear modified GTN model’ Computational Materials Science 2014, Volume 84, pp. 175-187

6. CATY O., IBARROULE P., HERBRETEAU M., REBILLAT F., MAIRE E., VIGNOLES G. L., ‘Application of X-ray computed micro-tomography to the study of damage and oxidation kinetics of thermostructural composites’ Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 2014, Volume 324, pp 113-117

7. ETIENNE A. , MASSARDIER-JOURDAN V., CAZOTTES S., GARAT X., SOLER M., ZUAZO I., KLEBER X. Ferrite effects in Fe-Mn-Al-C triplex steels’ Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 2014,Volume 45 (1), pp. 324-334

8. ETIEMBLE A., ADRIEN J., MAIRE E., IDRISSI H., REYTER D., ROUE L., ‘3D morphological analysis of copper foams as current collectors for Li-ion batteries by means of X-ray tomography’, Materials Science and Engineering B, 2014, Volume 187 pp. 1-8

9. FAVRE J. , FABRÈGUE D., MAIRE E., CHIBA A. ‘Grain growth and static recrystallization kinetics in Co-20Cr-15W-10Ni (L-605) cobalt-base superalloy’ Philosophical Magazine Volume 94 (18), 2014, pp. 1992-2008

10. LAWRENCE B., SINCLAIR C.W., PEREZ M. ‘Carbon diffusion in supersaturated ferrite: A comparison of mean-field and atomistic predictions’ Modelling and Simulation in Materials Science and Engineering 2014Volume 22 (6), Article number 065003

11. LIMODIN N., EL BARTALI A., WANG L., LACHAMBRE J., BUFFIERE J.-Y., CHARKALUK E. ‘Application of X-ray microtomography to study the influence of the casting microstructure upon the tensile behaviour of an Al–Si alloy’ Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 2014, Volume 324, pp. 57-62

12. LECARME L., MAIRE E., KUMAR K A., DE VLEESCHOUWER C., JACQUES L., SIMAR A. , PARDOEN T. ‘Heterogenous void growth revealed by in situ 3-D X-ray microtomography using automatic cavity tracking’ Acta Materialia 2014, Volume 63, p. 130-139

13. MU P., NADOT Y., NADOT-MARTIN C., CHABOD A., SERRANO-MUNOZ I., VERDU C., ‘Influence of casting defects on the fatigue behavior of cast aluminum AS7G06-T6’ International Journal of Fatigue 2014, Volume 63, pp. 97-109

14. REQUENA G., MAIRE E., LEGUEN C., THUILLIER S. ‘Separation of nucleation and growth of voids during tensile deformation of a dual phase steel using synchrotron microtomography’ Materials Science and Engineering: A 2014,Volume 589, pp 242–251

15. TCHITCHEKOVA D.S, MORTHOMAS J., RIBEIRO F., DUCHER R., PEREZ M. A novel method for calculating the energy barriers for carbon diffusion in ferrite under heterogeneous

stress Journal of Chemical Physics 2014,Volume 141(3), Article number 034118 16. VAN BOXEL S., SCHMIDT S., LUDWIG W., ZHANG Y.B., JENSEN D.J., PANTLEON

W. ‘Direct observation of grain boundary migration during recrystallization within the bulk of a moderately deformed aluminium single crystal’ Materials Transactions 2014, Volume 55 (1), pp.128-136

17. VEIGA R. G. A., BECQUART C. S., PEREZ M., ‘Comments on "Atomistic modeling of an Fe system with a small concentration of C’2014, Comput. Mater. Sc., vol. 82, pp. 118-121

18. UCHIMOTO T., GUY P., TAKAGI T., COURBON J., ‘Evaluation of an EMAT-EC dual probe in sizing extent of wall thinning’ NDT and E International 2014,Volume 62, pp. 160-166

2013

1. ABS DA CRUZ C., CHANTRENNE P., GOMES DE AGUIAR VEIGA R., PEREZ M., KLEBER X., ‘Modified embedded-atom method interatomic potential and interfacial thermal conductance of Si-Cu systems: A molecular dynamics study’. Journal of Applied Physics, 2013, Volume 113(2), Article number 023710

2. BABOUT L., GRUDZIEN K., MAIRE E., WITHERS P.J. ‘Influence of wall roughness and packing density on stagnant zone formation during funn,el flow discharge from a silo: An X-ray imaging study’ Chemical Engineering Science 2013, volume 97 , pp. 210-224

3. BAUDOUIN J.-B., MONNET G., PEREZ M., DOMAIN C., NOMOTO A. ‘Effect of the applied stress and the friction stress on the dislocation dissociation in face centered cubic metals’ Materials Letters 2013, volume 97, pp. 93-96

4. BOULNAT X., FABREGUE D., PEREZ M., DOUILLARD T., MATHON M.-H., DE CARLAN Y., ‘High-temperature tensile properties of nano-oxide dispersion strengthened ferritic steels produced by mechanical alloying and spark plasma sintering’ Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 2013, volume 44 (6) , pp. 2461-2465

5. COTTRINO S., JORAND Y., ADRIEN J., OLAGNON C. ‘Spray-drying of highly concentrated nano alumina dispersions’, Powder Technology 2013, Volume 237, pp. 586-593

6. • COTTRINO S., JORAND Y., MAIRE E., ADRIEN J. ‘Characterization by X-ray tomography of granulated alumina powder during in situ die compaction’, Materials Characterization 2013, Volume 81, pp111–123

7. DENG X.D., MONNIER T., GUY P, COURBON J. 'Acoustic microscopy of functionally graded thermal sprayed coatings using stiffness matrix method and Stroh formalism’ Journal of Applied Physics 2013, Volume 113, (22), Article number 224508

8. DEVILLE S., ADRIEN J., MAIRE E., SCHEEL M., DI MICHIEL M. ‘Time-lapse, three-dimensional in situ imaging of ice crystal growth in a colloidal silica suspension’ 2013 Acta Materialia volume 61 (6) , pp. 2077-2086

9. FABREGUE D., LANDRON C., BOUAZIZ O., MAIRE E. ‘Damage evolution in TWIP and standard austenitic steel by means of 3D X ray tomography’ Materials Science and Engineering A 2013, Volume 579, pp.92-98

10. FANSI J., BALAN T., LEMOINE X., MAIRE E., LANDRON C., BOUAZIZ O., BEN BETTAIEB M., MARIE HABRAKEN A. ‘Numerical investigation and experimental validation of physically based advanced GTN model for DP steels’, Materials Science and Engineering A 2013, volume 569, pp. 1-12

11. FAVRE J., FABREGUE D., CHIBA A., BRECHET Y. ‘Nucleation of recrystallization in fine-grained materials: An extension of the Bailey-Hirsch criterion’ Philosophical Magazine Letters 2013,Volume 93(11), pp. 631-639

12. FAVRE J., KOIZUMI Y., CHIBA A., FABREGUE D., MAIRE E. ‘Deformation Behavior and Dynamic Recrystallization of Biomedical Co-Cr-W-Ni (L-605) Alloy’. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2013, Volume 44(6) pp.

2819-2830 13. GONZALEZ D., KING A., MOSTAFAVI M., REISCHIG P., ROLLAND DU ROSCOAT S.,

LUDWIG W., QUINTA DA FONSECA J., WITHERS P.J., MARROW T.J. ‘Three-dimensional observation and image-based modelling of thermal strains in polycrystalline alumina’ Acta Materialia 2013, Volume 61(20), pp. 7521–7533

14. GUILHEM Y., BASSEVILLE S., CURTIT F., STÉPHAN J.-M., CAILLETAUD G., ‘Numerical investigations of the free surface effect in three-dimensional polycrystalline aggregates’, Computational Materials Science, 2013, volume 70 , pp. 150-162

15. HOSOKAWA A., WILKINSON D.S., KANG J., MAIRE E. ‘Influence of the restored work-hardening rate on ductility studied by X-ray computed tomography’ Philosophical Magazine Letters 2013, Volume 93 (7), pp. 379-386

16. HOSOKAWA A., WILKINSON D.S., KANG J., MAIRE E., ‘Onset of void coalescence in uniaxial tension studied by continuous X-ray tomography’ Acta Materialia, 2013, Volume 61 (4), pp. 1021-1033

17. LANDRON C., BOUAZIZ O., MAIRE E. , ADRIEN J. ‘Experimental investigation of void coalescence in a dual phase steel using X-ray tomography’, Acta Materialia , 2013, Volume 61 (18), pp. 6821-6829

18. KING A., REISCHIG P., ADRIEN J., LUDWIG W. ‘First laboratory X-ray diffraction contrast tomography for grain mapping of polycrystals’ Journal of Applied Crystallography 2013, Volume 46 (6), pp. 1734-1740

19. KOUTIRI I., BELLETT D., MOREL F., AUGUSTINS L., ADRIEN J., ‘High cycle fatigue damage mechanisms in cast aluminium subject to complex loads’. International Journal of Fatigue, 2013, Volume 47, pp.44-57

20. LACHAMBRE J., BUFFIERE J.-Y., RÉTHORÉ J., WECK A., ‘In situ 3D characterization of fatigue cracks displacement fields’, Frattura ed Integrita Strutturale, 2013,Volume 7(25), pp. 50-53

21. MADI K., GAILLIÈGUE S., BOUSSUGE M., FOREST S., GAUBIL M., BOLLER E., BUFFIÈRE J.-Y. Philosophical Magazine 2013, ‘Multiscale creep characterization and modeling of a zirconia-rich fused-cast refractory’ Volume 93, (20), pp 2701-2728

22. MAKKE A., LAME O., PEREZ M., BARRAT J.-L. ‘Nanoscale buckling in lamellar block copolymers: A molecular dynamics simulation approach’ Macromolecules 2013, Volume 46(19), pp. 7853-7864

23. MONNIER T., LALLART M., GUY P., PETIT L., RICHARD C., GUYOMAR D. ‘Self and low-powered lamb waves-based health monitoring of composite materials’ (Suivi de santé auto-alimenté et basse consommation des matériaux composites par ondes de Lamb) Revue des Composites et des Materiaux Avances, 2013 Volume 23(1), pp 99-110

24. RANA R., MASSARDIER V., SINGH S.B., MOHANTY O.N. ‘Effect of pre-treatment on copper precipitation characteristics in a copper-alloyed interstitial free steel studied by thermoelectric power measurement’, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2013, Volume 44 (1) , pp. 186-200

25. REISCHIG P., KING A., NERVO L., VIGANÓ N., GUILHEM Y., PALENSTIJN W. J., BATENBURG K. J., PREUSS M., LUDWIG W. ‘Advances in X-ray diffraction contrast tomography: flexibility in the setup geometry and application to multiphase materials’ Journal of Applied Crystallography,2013 Volume 46 (2), pp. 297-311

26. REVIL-BAUDARD B., CAZACU O., THUILLIER S., MAIRE E., Effect of stress triaxiality on porosity evolution in notched bars: Quantitative agreement between a recent dilatational model and X-ray tomography data Mechanics Research Communications 2013, Volume 50, pp 77–82

27. TANTOT A., SANTUCCI S., RAMOS O., DESCHANEL S., VERDIER M.-A., MONY E., WEI Y., CILIBERTO S., VANEL L., DI STEFANO P.C.F. ‘Sound and light from fractures in scintillators’ Physical Review Letters 2013, Volume 111(15), Article number 154301

28. TERMENTZIDIS K., BARRETEAU T., NI Y., MERABIA S., ZIANNI X., CHALOPIN Y., CHANTRENNE P., VOLZ S. ‘Modulated SiC nanowires: Molecular dynamics study of their

thermal properties’ Physical Review B - Condensed Matter and Materials Physics 2013, volume 87 (12) , art. no. 125410

29. TERMENTZIDIS K. , BARRETEAU T., NI Y., MERABIA S., ZIANNI X., CHALOPIN Y., CHANTRENNE P., VOLZ S. ‘Modulated SiC nanowires: Molecular dynamics study of their thermal properties’ Physical Review B - Condensed Matter and Materials Physics 2013, Volume 87 (12)

30. VEIGA R.G.A., PEREZ M., BECQUART C.S., DOMAIN C. ‘Atomistic modeling of carbon Cottrell atmospheres in bcc iron’, Journal of Physics Condensed Matter, Volume 25(2), 2013, article number 025401

31. ZHANG T., MAIRE E., ADRIEN J., ONCK P.R., SALVO L. “Local tomography study of the fracture of an ERG metal foam” Advanced Engineering Materials 2013, Volume 15 (8), pp. 767-772

32. ZIANNI X., CHANTRENNE P. ‘Thermal conductivity of diameter-modulated silicon nanowires within a frequency-dependent model for phonon boundary scattering’ Journal of Electronic Materials 2013, Volume 42 (7), pp.1509-1513

2012

1. ABS DA CRUZ C., CHANTRENNE P., KLEBER X. ‘Molecular dynamics simulations and kapitza conductance prediction of Si/Au systems using the new full 2NN MEAM Si/Au aross-potential’. Journal of Heat Transfer, 2012, volume 134 (6), art. n°. 62402

2. AMIRECHE R., MORIN M., BELKAHLA S., ‘Study of the "all-Round-Effect" generated by aging in traction in a Ni rich TiNi shape memory alloy’. Journal of Alloys and Compounds 2012, volume 516, pp 5-8

3. BEAL C., KLEBER X., FABREGUE D., BOUZEKRI M. ‘Embrittlement of a zinc coated high manganese TWIP steel’. Materials Science and Engineering A 2012, volume 543, pp. 76-83

4. BEAL C., KLEBER X., FABREGUE D., BOUZEKRI M. ‘Liquid zinc embrittlement of twinning-induced plasticity steel’. Scripta Materialia volume 66 (12), pp. 1030-1033

5. CHANTRENNE P. TERMENTZIDIS K. ‘Prediction of the thermal conductivity of SiC nanowires with kinetic theory of gases’, Physica Status Solidi (A) Applications and Materials Science, volume 209 (12), pp. 2492-2498

6. DANCETTE S., FABREGUE D., ESTEVEZ R., MASSARDIER V., DUPUY T., BOUZEKRI M. ‘A finite element model for the prediction of Advanced High Strength Steel spot welds fracture’. Engineering Fracture Mechanics 2012, volume 87, pp. 48-61.

7. DANCETTE S., FABREGUE D., MASSARDIER V., MERLIN J., DUPUY T., BOUZEKRI M. ‘Investigation of the Tensile Shear fracture of Advanced High Strength Steel spot welds’. Engineering Failure Analysis 2012, volume 25 pp. 112-122.

8. DU Q., PEREZ M., POOLE W.J., WELLS M. ‘Numerical integration of the Gibbs-Thomson equation for multicomponent systems’. Scripta Materialia 2012, volume 66 (7) , pp. 419-422.

9. FABREGUE D. , PIALLAT J. MAIRE E., JORAND Y., MASSARDIER-JOURDAN V., BONNEFONT G. Spark plasma sintering of pure iron nanopowders by simple route. Powder Metallurgy, 2012, volume 55(1), pp76-79

10. GRUDZIEN K., NIEDOSTATKIEWICZ M., ADRIEN J., MAIRE E., BABOUT L., ‘Analysis of the bulk solid flow during gravitational silo emptying using X-ray and ECT tomography’. Powder Technology ,2012, volume 224, pp 196-208

11. HILD F., ROUX S., BAÏETTO M.-C., COMBESCURE A., GRAVOUIL A., RANNOU J., RÉTHORÉ J., BUFFIÈRE J.-Y., LIMODIN N., LUDWIG W, ‘Radioscopies of a fatigue crack’ Instrumentation Mesure Metrologie 2012, volume 12 (1-2), pp131-152

12. HOSOKAWA A.,WILKINSON D.S., KANG J., MAIRE E., ‘Effect of triaxiality on void growth and coalescence in model materials investigated by X-ray tomography’. Acta Materialia 2012, volume 60 (6-7), pp 2829-2839

13. LAHOUCINE C.O., CHANTRENNE P. ‘Prediction of the thermal conductivity of ZnO

nanobelts’, Journal of Applied Physics 2012, Volume 112 (8), Article number084907 14. LAIARINANDRASANA L., MORGENEYER T.F., PROUDHON H., N'GUYEN F., MAIRE E.

‘Effect of multiaxial stress state on morphology and spatial distribution of voids in deformed semicrystalline polymer assessed by X-ray tomography’. Macromolecules 2012, volume 45 (11),

pp. 4658-4668 15. LANDRON C., MAIRE E., ADRIEN J., SUHONEN H., CLOETENS P., BOUAZIZ O. ‘Non-

destructive 3-D reconstruction of the martensitic phase in a dual-phase steel using synchrotron holotomography’. 2012, Scripta Materialia volume 66 (12), pp. 1077-1080

16. LANDRON C., MAIRE E., ADRIEN J., BOUAZIZ O., DI MICHIEL M., CLOETENS P., SUHONEN H., ‘Resolution effect on the study of ductile damage using synchrotron X-ray tomography’ Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 2012, Volume 284, pp. 15-18

17. LASALLE A., GUIZARD C., LELOUP J., DEVILLE S., MAIRE E., BOGNER A., GAUTHIER C., ADRIEN J., COURTOIS L. ‘Ice-templating of alumina suspensions: Effect of supercooling and crystal growth during the initial freezing regime’. Journal of the American Ceramic Society 2012, volume 95 (2), pp 799-804

18. LASALLE A., GUIZARD C., MAIRE E., ADRIEN J., DEVILLE S. ‘Particle redistribution and structural defect development during ice templating’. Acta Materialia 2012, volume 60 (11), pp. 4594-4603

19. MAIRE E. X-ray tomography applied to the characterization of highly porous materials. Annual Review of Materials Research, 2012, volume 42, pp. 163-178

20. MAIRE E., MORGENEYER T., LANDRON C., ADRIEN J., HELFEN, L. ‘Bulk evaluation of ductile damage development using high resolution tomography and laminography’. Comptes Rendus Physique , 2012 volume 13 (3), pp. 328-336

21. MAKKE A., PEREZ M., LAME O., BARRAT J.-L. ‘Nanoscale buckling deformation in layered copolymer materials’. Proceedings of the National Academy of Sciences of the United States of America, 2012, Volume 109 (3), pp. 680-685

22. MAKKE A., LAME O., PEREZ M., BARRAT J.-L. Influence of tie and loop molecules on the mechanical properties of lamellar block copolymers. Macromolecules 2012, volume 45 (20), pp. 8445-8452

23. MASSARDIER V., NGANSOP A., CAZOTTE S., FABREGUE D., MERLIN J.. Ultra-rapid intercritical annealing to improve deep-drawability of low carbon, Al-killed steels. Metallurgical and Materials Transactions, 2012, Volume 43A, pp 2225-2236.

24. MOUAWAD B., SOUEIDAN M., FABRÈGUE D., BUTTAY C., BLEY V., ALLARD B., MOREL H. ‘Full densification of molybdenum powders using spark plasma sintering’. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 2012, volume 43 (9), pp. 3402-3409

25. MOUAWAD B., SOUEIDAN M., FABREGUE D., BUTTAY C., ALLARD B., BLEY V., MOREL H., MARTIN C. ‘Application of the spark plasma sintering technique to low-temperature copper bonding’. IEEE Transactions on Components, Packaging and Manufacturing Technology 2012, volume 2 (4), art. no. 6166866 , pp. 553-560

26. PROUDHON H., MOFFAT A., SINCLAIR I., BUFFIERE J.-Y. ‘Three-dimensional characterisation and modelling of small fatigue corner cracks in high strength Al-alloys’. Comptes Rendus Physique 2012, volume 13 (3) , pp. 316-327

27. RANA R., MASSARDIER V., SINGH S.B., MOHANTY O. ‘Effect of pre-treatment on copper precipitation characteristics in a copper alloyed interstitial free steel studied by thermoelectric power measurement’. Metallurgical and Materials Transactions, 2012, volume 44, n°1, pp186-200

28. RAZZAK M.A., PEREZ M.,SOURMAIL T., CAZOTTES S.,FROTEY M. ‘A Simple Model for Abnormal Grain Growth’ ISIJ International 2012, Volume 52 (12), pp. 2278–2282

29. SUERY M., TERZI S., MIREUX B., SALVO L., ADRIEN J., MAIRE E. ‘Fast in situ x-ray microtomography observations of solidification and semisolid deformation of Al-Cu alloys’.

JOM , 2012, Volume 64 (1), pp. 83-88 30. SYHA M., RHEINHEIMER W., BÄURER M., LAURIDSEN E.M., LUDWIG W., WEYGAND

D, GUMBSCH P. ‘Three-dimensional grain structure of sintered bulk strontium titanate from X-ray diffraction contrast tomography’. Scripta Materialia 2012, Volume 66 (1), pp 1-4

31. THUILLIER S., MAIRE E., BRUNET M. ‘Ductile damage in aluminium alloy thin sheets: Correlation between micro-tomography observations and mechanical modeling’. Materials Science and Engineering A 2012, volume 558, pp. 217-225

32. TONICELLO E., GIRODIN D., SIDOROFF C., FAZEKAS A., PEREZ M. ‘Rolling bearing applications: Some trends in materials and heat treatments’. Materials Science and Technology, 2012, volume 28 (1) pp. 23-26

33. ZANELLATO O., PREUSS M., BUFFIERE J.-Y., RIBEIRO F., STEUWER A., DESQUINES J., ANDRIEUX J., KREBS B. ‘Synchrotron diffraction study of dissolution and precipitation kinetics of hydrides in Zircaloy-4’. Journal of Nuclear Materials, 2012, Volume 420, (1-3), pp 537-547

34. ZHANG L., FERREIRA J.M.F., OLHERO S., COURTOIS L., ZHANG T., MAIRE E., RAUHE J.C. ‘Modeling the mechanical properties of optimally processed cordierite-mullite-alumina ceramic foams by X-ray computed tomography and finite element analysis’. Acta Materialia 2012, volume 60 (10), pp. 4235-4246

2011

1. BAREGGI A., MAIRE E., LASALLE A., DEVILLE S. ‘Dynamics of the Freezing Front During the Solidification of a Colloidal Alumina Aqueous Suspension: In Situ X-Ray Radiography’, Tomography, and Modeling 2011, volume 94 (10), pp. 3570-3578

2. BEAL C., KLEBER X, FABREGUE D., BOUZEKRI M. ‘Liquid zinc embrittlement of a high-manganese-content TWIP steel’, Philosophical Magazine Letters 2011, Volume 91 (4), pp 297-303

3. BIROSCA S., BUFFIERE J.Y., KARADGE M., PREUSS M., ‘3-D observations of short fatigue crack interaction with la2mellar and duplex microstructures in a two-phase titanium alloy’ Acta Materialia 2011, Volume 59 (4), pp. 1510-1522

4. BORBELY A., CLOETENS P., MAIRE E. , REQUENA G., ‘Submicron tomography using high energy synchrotron radiation’ Advanced Structured Materials 2011,Volume 10, pp 151-170

5. BRUSSELLE-DUPEND N., ROSENBERG E., ADRIEN J. ‘Characterization of cavitation development while tensile testing PVF2 using 3D X-ray microtomography’ Materials Science and Engineering A 2011 volume 530 (1), pp. 36-50

6. CATY O., BUFFIERE J.-Y., MAIRE E., ADRIEN J. ‘3D characterization of the influence of porosity on fatigue properties of a cast al alloy’ Advanced Engineering Materials 2011, Volume 13 (3), pp 194-198

7. CHATEAU C., GÉLÉBART L., BORNERT M., CRÉPIN J., BOLLER E., SAUDER C., LUDWIG W. ‘In situ X-ray microtomography characterization of damage in SiCf/SiC minicomposites’ Composites Science and Technology 2011, Volume 71 (6), pp 916-924

8. DA CRUZ C. A., TERMENTZIDIS K., CHANTRENNE P., KLEBER X., ‘Molecular dynamics simulations for the prediction of thermal conductivity of bulk silicon and silicon nanowires: Influence of interatomic potentials and boundary conditions’, Journal of applied physics 2011 Volume 110 (3)

9. DANCETTE S., FABRÈGUE D., MASSARDIER V., MERLIN J., DUPUY T., BOUZEKRI, M. ‘Experimental and modeling investigation of the failure resistance of Advanced High Strength Steels spot welds’. Engineering Fracture Mechanics 2011, Volume 78 (10), pp 2259-2272

10. DANCETTE S., MASSARDIER-JOURDAN V., FABREGUE D., MERLIN J., DUPUY T., BOUZEKRI M. HAZ ‘Microstructures and local mechanical properties of high strength steels resistance spot welds’ ISIJ International 2011, 51 (1), pp. 99-107

11. DEVILLE S., VIAZZI C., LELOUP J., LASALLE A., GUIZARD C., MAIRE E., ADRIEN J., GREMILLARD L. ‘Ice shaping properties, similar to that of antifreeze proteins, of a zirconium acetate complex’, PLoS ONE 2011, volume 6 (10), art. no. e26474

12. ELGUEDJ T., RÉTHORÉ J. BUTERI A. ‘Isogeometric analysis for strain field measurements’ Computer Methods in Applied Mechanics and Engineering 2011, volume 200 (1-4),

13. FRIBOURG G., DESCHAMPS A., BRÉCHET Y., MYLONAS G., LABEAS G., HECKENBERGER U., PEREZ M., ‘Microstructure modifications induced by a laser surface treatment in an AA7449 aluminium alloy’ Materials Science and Engineering A 2011, Volume 528 (6), pp.2736-2747

14. GRUDZIEŃ K., NIEDOSTATKIEWICZ M., ADRIEN J., TEJCHMAN J., MAIRE E. ‘Quantitative estimation of volume changes of granular materials during silo flow using X-ray tomography’ Chemical Engineering and Processing: Process Intensification 2011, Volume 50 (1), pp 59-67

15. HERBIG M., KING A., REISCHIG P., PROUDHON H., LAURIDSEN E.M., MARROW J., BUFFIERE J.-Y., LUDWIG W. ‘3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography’ Acta Materialia 2011, Volume 59 (2), pp 590-601

16. HILD F., MAIRE E. et al. ‘Three-dimensional analysis of a tensile test on a propellant with digital volume correlation’. Archives of Mechanics ,2011, Volume 63 (5-6) pp. 1-20

17. KING A., LUDWIG W., HERBIG M., BUFFIÈRE J.-Y., KHAN A.A., STEVENS N., MARROW T.J. ‘Three-dimensional in situ observations of short fatigue crack growth in magnesium’ Acta Materialia 2011 volume 59 (17), pp. 6761-6771

18. KING A., LUDWIG W., ENGELBERG D., MARROW T.J. ‘Diffraction contrast tomography for the study of polycrystalline stainless steel microstructures and stress corrosion cracking’ Revue de Métallurgie. Cahiers D'Informations Techniques 2011 volume 108 (1), pp. 47-50

19. KUROSU S., MATSUMOTO H., CHIBA A., LANDRON C., FABREGUE D., MAIRE E. ‘The damage process in a biomedical Co-29Cr-6Mo-0.14N alloy analyzed by X-ray tomography and electron backscattered diffraction’ Scripta Materialia 2011, Volume 64 (5), pp. 367-370

20. LANDRON C., MAIRE E., BOUAZIZ O., ADRIEN J., LECARME L., BAREGGI A. ‘Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels’ Acta Materialia 2011 Volume 59 (20), pp. 7564-7573

21. LIMODIN N., RÉTHORÉ J., BUFFIÈRE J.-Y., HILD F., LUDWIG W., RANNOU J., ROUX S., ‘3D X-ray microtomography volume correlation to study fatigue crack growth’ Advanced Engineering Materials 2011, Volume 13 (3), pp.186-193

22. LIMODIN N, .RÉTHORÉ J., ADRIEN J., BUFFIÈRE J.-Y., HILD F., ROUX S. ‘Analysis and Artifact Correction for Volume Correlation Measurements Using Tomographic Images from a Laboratory X-ray Source’, Experimental Mechanics 2011, volume 51 (6), pp. 959-970

23. LÓPEZ CUÉLLAR E., REYES MELO E., MARTÍNEZ-DE LA CRUZ A., LOERA A.G., MORIN M. ‘Changes in the thermoelectric power of a Ni base superalloy induced by elastic and plastic strain’ Journal of Alloys and Compounds 2011, Volume 509 (26), pp 7297-7302

24. LUDWIG W., KING A., HERBIG M., REISCHIG P., MARROW J., BABOUT L., PROUDHON H., LAURIDSEN E.M., BUFFIÈRE J.-Y. ‘The three-dimensional microstructure of polycrystalline materials unravelled by synchrotron light ‘| [La microstructure 3D des matériaux polycristallins vue sous la lumière synchrotron] Actualité Chimique 2011 Volume (356-357), pp. 62-67

25. MAIRE E, ZHOU S., ADRIEN J , DIMICHIEL M. ‘Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography’ Engineering Fracture Mechanics 2011,Volume 78 (15), pp. 2679-2690

26. MAKKE A., PEREZ M., ROTTLER J., LAME O., BARRAT J.-L. ‘Predictors of cavitation in glassy polymers under tensile strain: A coarse-grained molecular dynamics investigation’ Macromolecular Theory and Simulations 2011, volume 20 (9), pp. 826-836

27. MATSUMOTO H., YONEDA H., FABREGUE D., MAIRE E., CHIBA A., GEJIMA F. ‘Mechanical behaviors of Ti-V-(Al, Sn) alloys with α′ martensite microstructure’ Journal of Alloys and Compounds Volume 509 (6), 2011, pp. 2684-2692

28. MATSUMOTO H., YONEDA H., SATO K., KUROSU S., MAIRE E. , FABREGUE D., KONNO T.J., CHIBA A. ‘Room-temperature ductility of Ti-6Al-4V alloy with α' martensite microstructure’ Materials Science and Engineering A Volume 528(3), 2011, pp 1512-1520

29. MILESI M., BOUCHARD P.O., CORNUAULT P.H., CHASTEL Y., BERNACKI M., HACHEM E. ‘Advanced numerical method for generation of three-dimensional particles and its application in microstructure-based simulation of fatigue behavior’ Computational Materials Science 50 (10), 2011, pp. 2836-2847

30. PESSARD E., MOREL F., VERDU C., FLACELIERE L., BAUDRY G. ‘Microstructural heterogeneities and fatigue anisotropy of forged steels’ Materials Science and Engineering A 2011, volume 529 (1), pp. 289-299

31. RÉTHORÉ J., LIMODIN N., BUFFIÈRE J.-Y., HILD F., LUDWIG W., ROUX S. ‘Digital volume correlation analyses of synchrotron tomographic images’ Journal of Strain Analysis for Engineering Design 2011, volume 46 (7), pp. 683-695

32. SUN Z., LAITEM C., VINCENT A. ‘Dynamic embrittlement during fatigue of a Cu-Ni-Si alloy’ Materials Science and Engineering A 2011, Volume 528 (19-20), pp. 6334-6337

33. TERMENTZIDIS K. , PARASURAMAN J., DA CRU C.A., MERABIA S., ANGELESCU D., MARTY F., BOUROUINA T., KLEBER X., CHANTRENNE P., BASSET P. ‘Thermal conductivity and thermal boundary resistance of nanostructures’. Nanoscale Research Letters 2011, Volume 6 (1), pp X1-10

34. TODA H., MAIRE E., YAMAUCHI S., TSURUTA H., HIRAMATSU T., KOBAYASHI M. ‘In situ observation of ductile fracture using X-ray tomography technique’. Acta Materialia 2011, Volume 59 (5), pp 1995-2008

35. TUNCER N., ARSLAN G., MAIRE E. SALVO L. ‘Influence of cell aspect ratio on architecture and compressive strength of titanium foams’. Materials Science and Engineering A 2011, Volume 528 (24), pp 7368-7374

36. TUNCER N., ARSLAN G., MAIRE E., SALVO L. Investigation of spacer size effect on architecture and mechanical properties of porous titanium. 2011 Materials Science and Engineering A 530 (1), pp. 633-642

37. VANDERESSE N., MAIRE É., CHABOD A., BUFFIÈRE J.-Y., ‘Microtomographic study and finite element analysis of the porosity harmfulness in a cast aluminium alloy’. International Journal of Fatigue 2011, Volume 33(12), pp.1514-1525

38. VECHAMBRE C., BULEON A., CHAUNIER L., GAUTHIER C., LOURDIN D. Understanding the mechanisms involved in shape memory starch: Macromolecular orientation, stress recovery and molecular mobility. Macromolecules, 2011, Volume 44 (23), pp. 9384-9389

2010

1. BANERJEE K., MILITZER M., PEREZ M. AND WANG X., ‘Nonisothermal Austenite Grain Growth Kinetics in a Microalloyed X80 Linepipe Steel’, Metall. Mater. Trans. A, 2010, Volume41 (12), pp. 3161-3172

2. BECQUART C., PEREZ M., ‘Dynamique moléculaire appliquée aux matériaux’, Technique de l’ingénieur 2010, RE 136, pp; 1-9

3. BIROSCA S., BUFFIERE J.Y., GARCIA-PASTOR F.A., KARADGE M., BABOUT L., PREUSS M. ‘Corrigendum to "Three-dimensional characterization of fatigue cracks in Ti-6246 using X-ray tomography and electron backscatter diffraction" ‘[Acta Materialia 57 (2009) 5834-5847] (DOI:10.1016/j.actamat.2009.08.009) Acta Materialia 2010, volume 58 (4), pp. 1466

4. BOUZEKRI M, DANCETTE S, DUPUY T, LENS A, OULTIT BN, MASSARDIER V, FABREGUE D, KLOCKER H, ‘An investigation of failure types in high-strength steel

resistance spot welds’ Welding in the world 2010, volume 54 (3-4) pp 3-14 5. BUFFIERE JY, MAIRE E , ADRIEN J, MASSE JP, BOLLER E, ‘In Situ Experiments with X

ray Tomography: an Attractive Tool for Experimental Mechanics’ Experimental Mechanics 2010, volume 50 (3) pp. 289-305

6. CHARLES Y., ESTEVEZ R., BRECHET Y., MAIRE, E. Modelling the competition between interface debonding and particle fracture using a plastic strain dependent cohesive zone Engineering Fracture Mechanics 2010, volume 77(4), pp. 705-718

7. CHASSIGNOLE B., EL GUERJOUMA R., PLOIX M.-A., FOUQUET T. ‘Ultrasonic and structural characterization of anisotropic austenitic stainless steel welds: Towards a higher reliability in ultrasonic non-destructive testing’ NDT and E International 2010, volume 43(4), pp. 273-282

8. COQUARD R., BAILLIS D., MAIRE E., ‘Numerical investigation of the radiative properties of polymeric foams from tomographic images’ Journal of Thermophysics and Heat Transfer 2010 volume 24 (3), pp. 647-658

9. DELACROIX J., BUFFIERE J.-Y., FOUVRY S., DANIELOU A. ‘Effects of microstructure on the incipient fatigue and fretting crack processes in Al-Cu-Li alloys’ Journal of ASTM International 2010, volume 7 (4)

10. DESCHAMPS A, PEREZ M, ‘Mesoscopic modelling of precipitation: A tool for extracting physical parameters of phase transformations in metallic alloys’ Comptes-rendus de physique, 2010, volume 11 (3-4) pp. 236-244

11. DEVILLE S., MAIRE E., LASALLE A., BOGNER A., GAUTHIER C., LELOUP J., GUIZARD C.’Influence of particle size on ice nucleation and growth during the ice-templating process’ Journal of the American Ceramic Society 2010 ,volume 93 (9), pp. 2507-2510

12. FABREGUE D., PIALLAT, J., MAIRE E., JORAND Y., MASSARDIER-JOURDAN V. ‘Nanograined size pure iron elaborated by means of spark plasma sintering’ Materials Science Forum 2010, volume 638-642, pp. 1691-1696

13. KING A., HERBIG M., LUDWIG W., REISCHIG P., LAURIDSEN E.M., MARROW T., BUFFIÈRE J.Y. ‘Non-destructive analysis of micro texture and grain boundary character from X-ray diffraction contrast tomography’ Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 2010, Volume 268 (3-4), pp. 291-296

14. KLEBER X., BARROSO S.P. ‘Investigation of shot-peened austenitic stainless steel 304L by means of magnetic Barkhausen noise’ Materials Science and Engineering 2010, volume A 527 (21-22), pp. 6046-6052

15. LANDRON C., BOUAZIZ O., MAIRE E., ADRIEN J. ‘Characterization and modeling of void nucleation by interface decohesion in dual phase steels’ Scripta Materialia 2010, volume 63 (10), pp. 973-976

16. LIMODIN N., RÉTHORÉ J., BUFFIÈRE J.-Y., HILD F., ROUX S., LUDWIG W., RANNOU J., GRAVOUIL A. ‘Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation’ Acta Materialia 2010, Volume 58 (8), pp. 2957-2967

17. LIMODIN N., SALVO L., SUERY M., DELANNAY F. ‘Capillary equilibrium in a semi-solid Al-Cuslurry’ International Journal of Materials Research 2010, Volume 101 (2), pp 265-270

18. LUDWIG W, KING A, HERBIG M, REISCHIG P , MARROW J, BABOUT L, LAURIDSEN EM, PROUDHON H, BUFFIERE JY, ‘Characterization of Polycrystalline Materials Using Synchrotron X-ray Imaging and Diffraction Techniques’ Journal of the Minerals, Metals and Materials Society 2010,Volume 62 (12) pp. 22-28

19. MASSARDIER V., NGANSOP A., FABREGUE D., MERLIN J. ‘Identification of the parameters controlling the grain refinement of ultra-rapidly annealed low carbon Al-killed steels’ Materials Science and Engineering A 2010, volume 527 (21-22), pp. 5654-5663

20. MATSUMOTO H., YONEDA H., SATO K., KONNO T.J., KUROSU S., FABREGUE D., MAIRE E., CHIBA A. ‘Microstructure and mechanical properties of α′ martensite type Ti-V-Al alloy after cold- or hot working process’Key Engineering Materials 2010, volume 436, pp. 171-177

21. MOULIN N., PARRA-DENIS E., JEULIN D., DUCOTTET C., BIGOT A., BOLLER E., MAIRE E., BARATC., KLÖCKER H.‚‘Constituent particle break-up during hot rolling of AA 5182’ Advanced Engineering Materials 2010, Volume 12 (1-2), pp. 20-29

22. PEREZ M., LAME O., DESCHAMPS A. ‘Global techniques for characterizing phase transformations’ - A tutorial review, Advanced Engineering Materials 2010, volume 12 (6), pp. 433-446

23. RANNOU J., LIMODIN N., RETHORE J., GRAVOUIL A. , LUDWIG W. , BAÏETTO-DUBOURG M.-C. , BUFFIÈRE J.-Y., COMBESCURE A., HILD F., ROUX S. ‘Three dimensional experimental and numerical multiscale analysis of a fatigue crack’ Computer Methods in Applied Mechanics and Engineering 2010, Volume 199 (21-22), pp 1307-1325

24. SHAIRA M., GUY P. , COURBON J., GODIN N. ‘Monitoring of martensitic transformation in austenitic stainless steel 304L by eddy currents’ Research in Nondestructive Evaluation 2010, Volume 21 (2), pp. 112-126

25. SHATOKHA V., KOROBEYNIKOV I., MAIRE E., GRÉMILLARD L., ADRIEN J. ‘Iron ore sinter porosity characterisation with application of 3D X-ray tomography’ Ironmaking and Steelmaking 2010, volume 37 (5), pp. 313-319

26. SINCLAIR C. W., PEREZ M., VEIGA R. G. A. AND WECK A., ‘Ordering of Carbon in Highly Supersaturated α-Fe: A Molecular Dynamics Study’, Phys. Rev. B, 2010, volume 81, 224204

27. SPOLENAK R., LUDWIG W., BUFFIERE J.Y., MICHLER J. ‘In situ elastic strain measurements-diffraction and spectroscopy’ MRS Bulletin 2010, volume 35 (5), pp. 368-374

28. STIENON A., FAZEKAS A. ,BUFFIERE J.Y., DAGUIER P., MERCHI F., VINCENT A. ‘A new methodology for predicting fatigue properties of bearing steels: From X-ray micro-tomography and ultrasonic measurements to the bearing lives distribution’ journal of ASTM International 2010, Volume 7 (3)

29. SUERY M., ADRIEN J., LANDRON C., TERZI S., MAIRE E., SALVO L., BLANDIN J.-J. ‘Fast in-situ X-ray micro tomography characterisation of microstructural evolution and strain-induced damage in alloys at various temperatures’ International Journal of Materials Research 2010, volume 101 (9), pp. 1080-1088

30. VEIGA R. G. A., PEREZ M., BECQUART C. S., DOMAIN C., GARRUCHET S., Effect of the stress field of an edge dislocation on carbon diffusion in α-iron: Coupling molecular statics and atomistic kinetic Monte Carlo, Phys. Rev. B 2010, volume 82, 054103

31. VIDAL-SALLÉ E., NGUYEN Q.T. , CHARMETANT A., BRÉARD J., MAIRE E., BOISSE P. ‘Use of numerical simulation of woven reinforcement forming at mesoscale: Influence of transverse compression on the global response’ International Journal of Material Forming 2010, volume 3, Issue SUPPL. 1, pp. 699-702

2009

1. BIROSCA S., BUFFIERE J.Y. GARCIA-PASTOR F.A., KARADGE M., BABOUT L., PREUSS M. ‘Three-dimensional characterization of fatigue cracks in Ti-6246 using X-ray tomography and electron backscatter diffraction’ Acta Materialia 2009, Volume 57(19), pp. 5834-5847

2. BOÉ A., SAFI A., COULOMBIER M., FABRÈGUE D., PARDOEN T., RASKIN J.-P. ‘MEMS-based microstructures for nanomechanical characterization of thin films’ Smart Materials and Structures 2009, Volume 18 (11), Article number 115018

3. CATY O., MAIRE E., DOUILLARD A., BERTINO P., DEJAEGER R., BOUCHET R. ‘Experimental determination of the macroscopic fatigue properties of metal hollow sphere structures’. Materials Letters, 2009. Volume 63 pp.1131-1134

4. CUÉLLAR E.L., MORIN M., MELO E.R., MÉNDEZ U.O., GUAJARDOMARTÍNEZ H, CORTÉZ J.Y., ‘In situ strained Inconel 718 superalloy studied by thermoelectric power technique’ Journal of Alloys and Compounds 2009, Volume 467 (1-2), pp. 572-577

5. DESCHANEL S., VANEL L., GODIN N, MAIRE E., VIGIER G., CILIBERTO S. ‘Mechanical response and fracture dynamics of polymeric foams’ Journal of Physics D: Applied Physics 2009, Volume 42 (21), Article number 214001

6. DESCHANEL S., VANEL L., GODIN N, MAIRE E., VIGIER G., CILIBERTO S. ‘Experimental study of crackling noise: Conditions on power law scaling correlated with fracture precursors’ Journal of Statistical Mechanics: Theory and Experiment 2009, volume 2009 (1), Article number P01018

7. DEVILLE S., MAIRE E., BERNARD-GRANGER G., LASALLE A., BOGNER A., GAUTHIER C., LELOUP J., GUIZARD C. ‘Metastable and unstable cellular solidification of colloidal suspensions’ Nature Materials 2009, volume 8 (2), pp. 966-972

8. DEVILLE S., MAIRE E., LASALLE A., BOGNER A., GAUTHIER C., LELOUP J., GUIZARD C. ‘In situ X-ray radiography and tomography observations of the solidification of aqueous alumina particle suspensions’ - Part I: Initial instants Journal of the American Ceramic Society 2009, Volume 92 (11), pp. 2489-2496

9. DEVILLE S., MAIRE E., LASALLE A., BOGNER A., GAUTHIER C., LELOUP J., GUIZARD C. ‘In situ X-ray radiography and tomography observations of the solidification of aqueous alumina particle suspensions’- Part II: Steady state Journal of the American Ceramic Society 2009, Volume 92(11), pp. 2497-2503

10. FABRÈGUE D., DESCHAMPS A., SUÉRY M. ‘Influence of the silicon content on the mechanical properties of AA6xxx laser welds’ Materials Science and Engineering A 2009, Volume 506(1-2), pp. 157-164

11. GOBIN P.F., SALVIA M., MORIN M. ‘Intelligent structural materials and biomimetism’ Materiaux et Techniques 2009, volume 97( 1), pp. 19-28

12. GODIN N., DESCHANEL S., COURBON J. ‘Acoustic Emission: Identification of the acoustic signature of damage mechanisms and lifetime prediction’ Materiaux et Techniques 2009, volume 97 (1), pp. 35-42

13. GODIN N., CHAKI S., COURBON J., DESCHANEL S., GILLET S., GAUTIER B. ‘Acoustic emission potentialities for characterization of Mullins effect in natural rubber materials filled with carbon black’. Polymer Testing 2009, Volume 28(1), p.103-105

14. HILD F., MAIRE E., ROUX S., WITZ, J.-F. ‘Three-dimensional analysis of a compression test on stone wool’ Acta Materialia 2009, volume 57(11), pp. 3310-3320

15. HUNG Y-C., BENNETT J.A., GARCIA PASTOR F.A., DI MICHIEL M., BUFFIERE J.Y., DOEL J.A., BOWEN P., WITHERS P.J. ‘Fatigue crack growth and load redistribution in tisic composites observed in situ’. Acta materialia, 2009. Vol.57. p.599

16. KLEBER X, ROUX P, MORIN M ‘Sensitivity of the thermoelectric power of metallic materials to an elastic uniaxial strain’ Philosophical Magazine Letters 2009, volume 89(9) pp.565-572

17. LIMODIN N., RÉTHORÉ J., BUFFIÈRE J.-Y., GRAVOUIL A., HILD F., http://www.scopus.com/search/submit/author.url?author=Roux%2c+S.&authorId=7103057909&origin=recordpage

‘Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images’ Acta Materialia 2009, volume 57 (14), pp. 4090-4101

18. LIMODIN N., SALVO L. , BOLLER E., SUÉRY M., FELBERBAUM M., GAILLIÈGUE S., MADI K. ‘In situ and real-time 3-D microtomography investigation of dendritic solidification in an Al-10 wt.% Cu alloy’ Acta Materialia 2009, Volume 57(7), pp. 2300-2310

19. LIMODIN N; SALVO L; SUERY M, DELANNAY F. ‘Assessment by microtomography of 2D image analysis methods for the measurement of average grain coordination and size in an aggregate’ Scripta Materialia 2009, volume 60(5) , pp. 325-328

20. LUDWIG W., KING A., REISCHIG P., HERBIG M., LAURDISEN E.M., SCHMIDT S., PROUDHON H., FOREST

B., CLOETENS P., ROSCOAT S.R.D., BUFFIÈRE J.Y., MARROW T.J, POULSEN H.F. ‘New opportunities for 3D

materials science of polycrystalline materials at the micrometre lengthscale by combined use of X-ray difraction and X-ray

imaging’. Materials Science and Engineering A 2009, volume 524 (1-2), pp 69-76 21. LUDWIG W., REISCHIG P., KING A., HERBIG M., LAURDISEN E.M., JOHNSON G., MARROW J.,

BUFFIERE J.Y. ‘Three-dimensional grain mapping by X-ray difraction contrast tomography and the use of

Friedel pairs in diffraction data analysis’. Review of Scientific instruments 2009, Volume 80 (3), Article number 033905

22. MAKKE A., PEREZ M., LAME O. BARRAT, J.-L. ‘Mechanical testing of glassy and rubbery polymers in numerical simulations: Role of boundary conditions in tensile stress experiments’. Journal of Chemical 2009, Volume 131 (1), Article number 014904

23. MASSARDIER V., MERLIN J. Analysis of the parameters influencing the quench-aging behavior of ultra-low-carbon steels Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 2009, Volume 40(5), pp. 1100-1109

24. ORLOV O.S, WORSWICK M.J., MAIRE E., LLOYD D.J. ‘Simulation of damage percolation within aluminum alloy sheet’ Journal of Engineering Materials and Technology, Transactions of the ASME 2009,volume 131 (2), pp. 0210011-02100112

25. PEREZ M., SIDOROFF C., VINCENT A., ESNOUF C. Microstructural evolution of martensitic 100Cr6 bearing steel during tempering: From thermoelectric power measurements to the prediction of dimensional changes. Acta materialia, 2009,Volume 57(11), pp.3170-3181

26. PEREZ M., MASSARDIER V., KLEBER X. ‚‘Thermoelectric power applied to metallurgy: Principle and recent

applications’ International Journal of Materials Research 2009, volume 100 (10), pp. 1461-1465 27. SHATOKHA V., KOROBEYNIKOV I., MAIRE E., ADRIEN J. ‘Application of 3D X-ray tomography to

investigation of structure of sinter mixture granules’ Ironmaking and Steelmaking 2009, volume 36 (6), pp 416-420

28. SINNETT-JONES P.E., BROWNE M., MOFFAT A.J., JEFFERS A.J., SAFFARI N., BUFFIERE J.Y., SINCLAIR I. ‘Crack initiation processes in acrylic bone cement’. Journal of Biomedical Materials Research 2009, volume 89(4), pp.1088-1097

29. STIENON A., FAZEKAS A., BUFFIERE J.Y., VINCENT A., DAGUIER P., MERCHI F. A new methodology based on x-ray micro-tomography to estimate stress concentrations around inclusions in high strength steels. Materials Science and Engineering 2009, volume 513-514 (C), pp.376-383

30. TERZI S., SALVO L., SUÉRY M., LIMODIN N., ADRIEN J., MAIRE E., PANNIER Y., BORNERT M., BERNARD D., FELBERBAUM M., RAPPAZ M., BOLLER E. ‚‘In situ X-ray tomography observation of inhomogeneous deformation in semi-solid aluminium alloys’ Scripta Materialia 2009, volume 61 (5), pp 449-452

CONFERENCES INVITEES:

2014 : 1. RÉTHORÉ J., LACHAMBRE J., ROUX C., FELD-PAYET S., HASSOUN A., PASSIEUX J-

C., WECK A., ADRIEN J. , BAÏETTO MC., BUFFIÈRE J-Y., GRAVOUIL A., HILD F., LECLERC H., ROUX S. ‘Recent Advances In Three Dimensional Investigation Of Fatigue Crack Growth Using X-Ray Tomography and Digital’ Volume Correlation Proc. XIV Portuguese Conference on Fracture (2014)

2. LUDWIG W., ‘3D mapping of polycrystalline materials by X-ray imaging and diffraction techniques’ 3DMS, Annecy 2014

3. MAIRE E. 1. 11 et 12 février 2014. Colloque SFP polymères architecturés. 2. Fukuoka 12 mai 2014 3. Breme 26 mai 2014 4. archimat 2-6 juin 2014 5. 3DMS 1-3 juillet 2014 6. ACEX 3- 5 juillet 2014 7. EMMC14 Götheborg 25-27 Aout 2014 8. Santa Fé Syntactic foams 2- 6 octobre 2014.

2013

1. DANCETTE S., MAIRE E., BUFFIERE J.Y., LUDWIG W., ‘International Symposium on Plasticity 2013 and Its Current Applications, 2D And 3D Image Based Modeling of the Mechanical Response of Polycrystals by Crystal Plasticity’, Nassau, Bahamas, January 2013

2. FABRÈGUE D. « Top-down processing of metallic architectured materials » Colloque "Filling gaps in materials Space: methods and applications" Octobre 2013, Collège de France.

3. FABRÈGUE D., LAGER D., CHAFINO AIXA J.A., MAIRE E., HARTMANN D., RIVORY P. "Optimization of the microstructure of titanium TA6V for biomedical applications", 2nd World congress of Advanced Materials (WCAM), 05/07 juin 2013, Suzhou, Chine.

4. LACHAMBRE J., BUFFIÈRE J.-Y., RÉTHORÉ J., WECK A. ‘In situ 3D characterization of fatigue cracks displacement fields’ Proc. 2nd IJFatigue & FFEMS Joint Workshop CharacterisationCrack Tip Stress Fields Malaga 15-17 April 2013 Workshop sur invitation

5. LUDWIG W., KING A., REISCHIG P., GUENINCHAULT N., PROUDHON H. ‘3D mapping of polycrystalline materials by X-ray diffraction imaging techniques’ Euromat 2013, Sevilla (keynote)

6. LUDWIG W., CLOETENS P., SCHEEL M., BLEUET P., RACK A., BONIN A. ‘La tomographie X: mais ou Nantes va-t-elle ?’ Rayons X et Matiere2013

7. MAIRE E. Matériaux numérique. Loches 12-14 février 2013 Elyt workshop. Sendai 18-21 Février 2013. 18 juillet 2013. Villetaneuse. Pékin ACAA 14-17 septembre 2013 ICFD Sendai 25-29 novembre 2013 MRS. 2-6 novembre 2013

8. RIESCH J., BUFFIÈRE J-Y., HÖSCHEN T., DI MICHIEL M., SCHEEL M., WURSTER S., LINSMEIER CH., You J-H. ‘Tungsten Fibre-Reinforced Tungsten Composites : A novel concept for improving the toughness of tungsten’ International Conference on Plasma-Facing Materials and Components for Fusion Applications 14, Jülich, May 2013

2012

1. BUFFIERE J.-Y., ‘Application of synchrotron radiation for studying damage development in structural materials’. 12th International Symposium on Radiation Physics (ISRP12) Oct. 2012 Rio de Janeiro Brasil

2. COURBON J., MAIRE M. conf invitée de la chaire Saint-Gobain ESPCI ‘La rupture des matériaux métalliques’ Ecole polytechnique le 17 janvier 2012

3. FABREGUE D. « Metallurgical phenomena during thermo mechanical treatments: challenges in understanding" Conférence invitée lors du European Spallation Source Meeting, 15/16 Novembre 2012, Prague, République Tchèque

4. FABRÈGUE D., MASSARDIER V., NGANSOP A., JUNG M., MERLIN J. ‘Utra rapid annealing of steels’ Keynote lecture lors de The 5th International Symposium on Designing’, Processing and Properties of Advanced Engineering Materials, ISAEM2012, Toyohashi, Japon, 5-8 Novembre 2012

5. FABRÈGUE D., LAMONTAGNE A., FORTE R., PEREZ M., COURTOIS L., LANDRON C., MAIRE E., MASSARDIER V., BOULNAT X., MOUAWAD B., SOUEIDAN M., BUTTAY C., RIVIERE N., SATRE V., BOUAZIZ O., DE CARLAN Y. ‘Elaboration of smart materials (or smart elaboration of materials’ by the means of Spark Plasma Sintering" Journées Nationales de le SFMM,Paris, 28-30 Octobre 2012

6. FABRÈGUE D., DANCETTE S., MASSARDIER V., MERLIN J., ESTEVEZ R., BOUZEKRI M., DUPUY T. ‘Prediction of the load bearing capacity and fracture mode of spot welds of high strength steels’ Keynote lecture, lors du 10th International Seminar on Numerical Analysis of Weldability, Seggau, Autriche, 24-26 Septembre 2012

7. FABRÈGUE D., MERCIER F., FAVRE J., BEAL C., SELOUANE A., DANCETTE S., SALERO P., KLEBER X., PEREZ M., MAIRE E., MASSARDIER V., CHIBA A., MATSUMOTO H. ‘Overview of the use of the Gleeble at MATEIS, INSA Lyon: Focus on hot ductility tests in presence of liquid zinc’ Keynote lecture, lors du European Gleeble user meeting, Delft, Netherland, 24-25 Avril, 2012

8. MAIRE Eric, ‘In situ experiment in X ray tomography’ 25/24 janvier 2012 Pierron. Southampton 22/25 octobre 2012ANF

9. PEREZ M, ‘Evolution of precipitation state and strength in the Heat Affected Zone of a 6061 alloy’, SF2M JA2012 - Paris, 2012

10. VEIGA R.G.A., PEREZ M., BECQUART C. S., CLOUET E, DOMAIN C., ‘Modelling the effect of the stress field of dislocations on carbon diffusion in α-iron’, ALEMI 2012, Vancouver

2011

1. BUFFIERE J.Y., HERBIG M., LUDWIG W., PROUDHON H, SINCLAIR I., 3D Characterization of Fatigue Damage Mechanisms In Structural Materials Using Synchrotron X-rays Euromat 2011, Sept. 2011, Montpellier France

2. BUFFIÈRE J-Y., HERBIG M., LUDWIG W., PROUDHON H., SINCLAIR I. ‘3D Characterisation of Fatigue Damage Mechanisms In Structural Materials Using Synchrotron X-rays’ Proc. Euromat 2011 12-15 Sept 2011 Montpellier Keynote

3. COURBON J. 6e colloque 3M "Matériaux, Mécanique, Microstructure" de l'INSTN (Institut National des Sciences & Techniques Nucléaires) à Saclay les 20 et 21 juin 2011 sur le thème : ‘Alliages légers pour le transport : "Etude des mécanismes d'endommagement dans les alliages d'Aluminium. Suivi par tomographie X et émissions acoustiques (CND)"

4. COURBON J. 8th International Conf on Flow Dynamics, 9/11 -2011, Sendai (Japon) : ‘Can

Acoustic Emission Help Monitor Damage of Pipes or Just Understand Damage Mechanisms ?’ 5. FABRÈGUE D., MOUAWAD B., BUTTAY C., SOUEIDAN M., LAMONTAGNE A.,

FORTE R., PEREZ M., MAIRE E., MASSARDIER V. ‘Elaboration of architectured materials by spark plasma sintering’ THERMEC 2011 Publié dans Materials Science Forum, vol.706-709, pp1885-1892, 2011

6. KLEBER X., Colloque invité, ‘Couplage mécanique et magnétique’, Mécamat, Aussois, 01/2012 7. KING A., LUDWIG W., REISCHIG P., 3D orientation imaging microscopy based on

monochromatic beam synchrotron X-ray diffraction and imaging techniques, International conference on processing and manufacturing of advanced materials, Thermec, Quebec City, 2011

8. LUDWIG W., REISCHIG P., KING A., 3D orientation imaging microscopy based on synchrotron X-ray diffraction and imaging techniques, TMS annual meeting, San Diego, 2011

9. MAIRE Eric, ‘In situ experiment in X ray tomography’, 26/01/2011, Harvard University USA 10. MAIRE Eric, ‘In situ experiment in X ray tomography’, 4/02/2011, Carnegie Mellon

University (Pittsburgh) USA 11. MAIRE Eric, ‘In situ experiment in X ray tomography’ 16/02/2011, Los Alamos National

laboratory USA 12. MAIRE Eric, ‘In situ experiment in X ray tomography’ Thermec 2011 Québec city 13. MAIRE Eric, ‘In situ experiment in X ray tomography’ ATEM 2011 Kobe Japan 19-21

septembre 14. MAIRE Eric, ‘In situ experiment in X ray tomography’ Euromat 2011, Montpellier 13 – 14

septembre 15. MAIRE Eric ‘In situ experiment in X ray tomography’ 29/03/2011, Northwestern university

USA 16. MAIRE Eric ‘In situ experiment in X ray tomography’ Archimat 2011. 17. VEIGA R.G.A., PEREZ M., BECQUART C.S., CLOUET E. & DOMAIN C., ‘Modelling the

effect of the stress field of dislocations on carbon diffusion in α-iron’, TMS - San Diego, 2011 18. VEIGA R.G.A., PEREZ M., BECQUART C. S., CLOUET E. , DOMAIN C., ‘Modelling the

effect of the stress field of dislocations on carbon diffusion in α-iron’ department seminar - Vancouver, 2011

2010

1. BUFFIÈRE J-Y, LIMODIN N., RÉTHORÉ J., GRAVOUIL A., HILD F. , ROUX S., 3D Characterization And Modelling Of Fatigue Damage and Cracking In Metallic Alloys Using X-ray Tomography 12th Int. Conf. Al Alloys (ICAA12) Yokohama Sept. 2010

2. BUFFIÈRE J-Y, LIMODIN N., RÉTHORÉ J., LUDWIG W., GRAVOUIL A., HILD F. , ROUX S., 3D characterization of fatigue cracks using X-ray tomography: from synchrotron to laboratory sources, TMS 2010 Symposium 3D Materials Science Seattle 15-17 Feb. 2010 USA

3. LUDWIG W., HERBIG M., KING A., REISCHIG P., BUFFIÈRE J-Y., 3D Short Fatigue Crack Investigation using Synchrotron X-ray Imaging and Diffraction Techniques Euromech n° 505 – 7, 8, 9 July 2010

4. LEGUEN C., PEREZ M., EPICIER T., ACEVEDO D., SOURMAIL T., ‘A Criterion for Abnormal Grain Growth’, PTM 2010 - Avignon, 2010

5. LUDWIG W., ‘3D grain structures from X-ray diffraction contrast tomography’, European Crystallography Meeting, Darmstadt, 2010

6. LUDWIG W., La microstructure des matériaux polycristallins vue par la lumière synchrotron Journée Annuelles de la SF2M, 2010

7. LUDWIG W., HERBIG M., KING A., REISCHIG P., PROUDHON H., BUFFIERE J.Y.. ‘The grain microstructure of polycrystalline materials as revealed by the combined use of synchrotron x-ray imaging and diffraction techniques’. JA de la SF2M, 2010

8. KLEBER X., Colloque invité, Colloque ‘Contrainte Résiduelle’ aux Mines de Douai 10/2010

9. MAIRE Eric, ‘In situ experiment in X ray tomography Rank prize fund’. Windermere (England) du 11 au 14 octobre 2010

10. MAIRE Eric, ‘In situ experiment in X ray tomography’. Mc Master University 22/11/10 11. MAIRE Eric, ‘In situ experiment in X ray tomography’ Harvard University 26 janvier

2009

1. BUFFIERE J-Y, HERBIG M., LUDWIG W., PROUDHON H., ‘3D Characterization of Damage Mechanisms In Lightweight Structural Materials Using SynchrotronyX-rays’, International Conference on Advanced Technology in Experimental Mechanics 2011 ATEM 11, 19-21/2009, Kobe, Japan

2. KING A., HERBIG M., JOHNSON G., LUDWIG W., MARROW J., PROUDHON H., REISCHIG P., ROLLAND S., Mapping 3D shape, orientation and strain state of individual grains in polycrystals by X-ray diffraction contrast tomography, TMS annual meeting, San Francisco, 2009

3. LUDWIG W., KING A., REISCHIG P., HERBIG M., LAURIDSEN E., X-ray diffraction contrast tomography 3D characterization of polycrystal line materials at the grain level, EMRS spring meeting, Strasbourg 2009

4. LUDWIG W., KING A., REISCHIG P., HERBIG M., ROLLAND DU ROSCOAT S., SCHMIDT S., LAURIDSEN E.M., PROUDHON H., FOREST S., CLOETENS P., BUFFIÈRE J.Y., MARROW T., POULSEN H.F., ‘New opportunities for 3D materials science of polycrystalline materials at the

micrometre lengthscale by combined use of X-ray diffraction and X-ray imaging’TMS 2009 5. MAIRE E., ‘Damage in metals studied by X ray tomography’. ICACM2009. Shalimar

(Floride) 6. PEREZ M., GARRUCHET S., ‘Coupling molecular dynamics and kinetic Monte-Carlo

techniques: application to Snoek peak prediction’, THERMEC 2009 - Berlin, 2009 7. PEREZ M., ‘Global methods for characterizing phase transformations’, ICAM 2009 - Rio

de Janeiro, 2009

LIVRES MAIRE E, CATY O, KING A, ET AL. IUTAM ‘Symposium on Mechanical Properties of Cellular Materials’, SEP 17-20, 2007 Cachan, FRANCE. IUTAM SYMPOSIUM ON MECHANICAL PROPERTIES OF CELLULAR MATERIALS. IUTAM Bookseries. 12 pp. 35-42 (2009) MAIRE E ‘Multifunctional Metallic Hollow Sphere Structures. Manufacturing, Properties and Application’. Series: Engineering Materials Oechsner, Andreas; Augustin, Christian (Eds.) 2009, VI, 258 p. 149 illus., Hardcover ISBN: 978-3-642-00490-2 Rédaction du chapitre ‘fatigue’ BORBÉLY ANDRÁS, CLOETENS PETER, MAIRE ERIC AND REQUENA GUILLERMO ‘Submicron Tomography Using High Energy Synchrotron Radiation, in Fabrication and Characterization in the Micro-Nano Range’, Lasagni, Fernando A.; Lasagni, Andras F. (Eds.), Advanced Structured Materials, 10, 151-170 DOI: 10.1007/978-3-642-17782-8_7, Springer-Verlag Berlin Heidelberg 2011. ISBN 978-3-642-17781-1 DESCHANEL S., COURBON J., VIGIER G. "Durée de vie et potentiel restant des matériaux et des structures. " Les controverses technologiques de L’INSA de Lyon, Juillet 2009 . Publié aux Presses polytechniques et universitaires romandes CHAPITRES D’OUVRAGES SCIENTIFIQUES BUFFIERE J-Y. ET BARUCHEL J. ‘Hard X-ray synchrotron imaging techniques and applications’ Ouvrage: Synchrotron Radiation : Basics, Methods and Applications Ed. Springer 2014 ISBN: 978-3-642-55314 POULSEN H. F., LUDWIG W., SCHMIDT S. ‘Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Material and Component Characterization’ Editor(s): Walter Reimers, Anke Rita Pyzalla, Andreas K. Schreyer, Helmut Clemens, Wiley-VCH Verlag 2008 Chapter 19 3D X-ray Diffraction Microscope (pages 333–351) LUWIG W., KING A., REISCHIG P,. ‘Strain and dislocation gradients from diffraction: spatially resolved local structure and defects’ R. Barabash and G. Ice (editors), Imperial College 2014, Chapter 8 3D X-ray diffraction imaging techniques MAIRE E. AND C. OLIVIER, Multifunctional Metallic Hollow Sphere Structures. Manufacturing, Properties and Application. Series: Engineering Materials Oechsner, Andreas; Augustin, Christian (Eds.) 2009, VI, 258 p. 149 illus., Hardcover ISBN: 978-3-642-00490-2 Rédaction du chapitre « fatigue ». MAIRE E., BUFFIERE J.Y.. Imagerie 3D en mécanique des matériaux, traité MIM, hermès Paris

COMMUNICATIONS AVEC ACTES DANS UN CONGRES INTERNATIONAL OU NATIONAL

2014 1. DE PANNEMAECKER A.; FOUVRY S.; BUFFIERE J.-Y. ‘Introduction of a reverse

simulation approach to identify the fatigue stress intensity factor crack arrest threshold from fretting cracking experiments’. Conference: 7th International Symposium on Fretting Fatigue (ISFF) Location: Univ Oxford, Christ Church, Oxford, ENGLAND / APR 08-11, 2013 TRIBOLOGY INTERNATIONAL Volume 76 Special Issue: SI pp. 122-132 Published: AUG 2014

2. DANCETTE S., LE BOURLOT C., LEROUX N., MARTY G. ‘Influence des conditions aux limites en micro-déformation in-situ - Analyse en simulation par éléments finis couplée à la simulation de la diffraction’ Matériaux 2014

3. DESCHANEL S., GODIN N. "Étude de l’endommagement de matériaux par Emission Acoustique" Colloque Journées SF2M Sud-Est – 19 & 20 Juin 2014 à Lyon: Revisiter vos essais mécaniques des matériaux : « de la structure à la nano structure »

4. DESCHANEL S., BEN RHOUMA W., WEISS J., "Study of plasticity and microfracturing process during low-cycle fatigue of aluminium via acoustic emission." International Conference on Fatigue Damage of Structural Materials X, Hyannis, MA, USA- September 21-26, 2014.

5. FABRÈGUE D ‘Sintering and elaboration of architectured materilas’, Gleeble European users workshop, 8/9 avril 2014

6. FABRÈGUE D ‘Improved microstructure of Ti alloys for biomedical applications’, Elyt workshop, 19-21 Février 2014

7.  FABRÈGUE D., LANDRON C., MAIRE E., ‘Damage evolution in TWIP and standard austenitic steel by means of 3D X ray tomography’, High Manganese Steel Conference, 1-3 Septembre 2014 HMNS 2014, Aachen,(Best paper award)

2013 1. ADRIEN J., BUFFIÈRE J.-Y., HILD F., LIMODIN N., RÉTHORÉ J., ROUX S. ‘Artifact

correction for DVC measurements using a laboratory X-ray source’ Conference Proceedings of the

Society for Experimental Mechanics Series 2013, volume 3, pp 217-220 (Conference Paper Annual Conference on Experimental and Applied Mechanics; Costa Mesa, CA; 11-14/2012)

2. BOUTERF A., ROUX S., HILD F., MAIRE E., ADRIEN J., MEILLE S., VIVIER G., X. BRAJER, A novel digital volume correlation strategy applied to lightweight gypsum indentation tests, Photomechanics, Montpelier 27-29th May, 2013

3. BOUTERF A., ROUX S., HILD F., MAIRE E., MEILLE S., BRAJE, X., VIVIER G. ‘Identification d'une loi d'endommagement de plâtre à partir de mesures de champs de deplacements’. Congrès Français de Mécanique. 2013.

4. CANDAU N., CHAZEAU L., CHENAL J.-M., GAUTHIER C., MUNCH E., THIAUDIERE D. ‘In situ WAXS dynamic study of strain induced crystallization kinetics of synthetic and natural rubber (2013)’ Proceedings of the 8th European Conference on Constitutive Models for Rubbers, ECCMR 2013, pp. 479-484. (San Sebastian; Spain; 25/28 June 2013)

5. GUEDIA GUEMO G., CHANTRENNE P., JAC J. ‘Parameter identification of a lumped parameter thermal model for a permanent magnet synchronous machine’ Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013, art. no. 6556329, pp. 1316-1320. (Chicago, IL; United States; 12-15/05/ 2013)

6. GUEDIA GUEMO G., CHANTRENNE P., JAC J. ‘Application of classic and T lumped parameter thermal models for Permanent Magnet Synchronous Machines’ ; Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013, art. no. 6556186, pp. 809-815. (Chicago, IL; USA; 12-15/05/ 2013)

7. LACHAMBRE J., WECK A., RETHORE J., BUFFIERE J.-Y., ADRIEN J. ‘3D analysis of a

fatigue crack in cast iron using digital volume correlation of X-ray tomographic’ Conference

Proceedings of the Society for Experimental Mechanics Series 2013, volume 3, pp 203-209 (Conference Paper Annual Conference on Experimental and Applied Mechanics; Costa Mesa, CA; 11 -14/2012)

8. LAMONTAGNE A., KLEBER X., MASSARDIER V., MARI D. ‘Application of thermoelectric power technique to study the static strain ageing of heavily cold drawn steel(2013)’ TMS Annual Meeting, pp. 3-10 (San Antonio, TX; USA; 3/ 7 March 2013)

9. MAETZ J.Y., CAZOTTES S., VERDU C., KLEBER X. ‘Study of microstructural evolutions in lean duplex 2101 during aging (2013)’ TMS Annual Meeting, pp. 893-900. (San Antonio, TX; USA; 3/ 7 March 2013)

10. PROUDHON H., LI J., GUILHEM Y., LA LAIARINANDRASANA L., MORGENEYER, T., LUDWIG W., ROOS A., FOREST S, ‘Combining X-ray microtomography with the finite elements method to study damage and cracking in stuctural materials (2013)’ TMS Annual Meeting, pp. 1165-1173 (142nd Annual Meeting and Exhibition: Linking Science and Technology for Global Solutions, San Antonio, TX; USA; 3/7 March 2013)

11. RAZZAK M.A., PEREZ M., SOURMAIL T., CAZOTTES S., FORTEY M., ‘Precipitation and Abnormal Grain Growth in Low Alloy Steels’ TMS2013 Supplemental Proceedings , pp. 917–923, 2013,Published Online : 25 FEB 2013, DOI: 10.1002/9781118663547.ch114

12. TROUFFLARD J., REQUENA G., THUILLIER S., MAIRE É. Ductile damage in tension and bending for DP980 steel sheets (2013) Key Engineering Materials, 554-557, pp.110-117 16th ESAFORM Conference on Material Forming, ESAFORM 2013; Aveiro; Portugal; 22 / 24 April 2013

2012 1. ASSY A., GOMES S., CHANTRENNE P., PAVY N., PARASURAMAN J., KLEBER

X., BASSET P. ‘New thermal method for the characterization of solid materials at different temperature levels’, 18th International Workshop on Thermal Investigation of ICs and Systems, THERMINIC 2012) Budapest, 25-27/09/2012 Article number 6400603, pp 147-151

2. BEAL C., KLEBER X., FABREGUE D. , BOUZEKRI M. ‘Embrittlement of a high manganese TWIP steel in the presence of liquid zinc’ Materials Science Forum Volume 706-709, 2012, pp. 2041-2046 7th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC'2011; Quebec ; CANADA 1-5/08/2011

3. FABREGUE D. , MOUAWAD B.mailto:bassem.mouawad@insa-lyon.fr, BUTTAY C., SOUEIDAN M., LAMONTAGNE A., FORTE R., PEREZ M., COURTOIS L., LANDRON C., MAIRE E., MASSARDIER V. ‘Elaboration of architectured materials by spark plasma sintering’ Materials Science Forum Volume 706-709, 2012, pp 1885-1892 7th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC'2011; Quebec ; Canada 1-5/08/2011

4. FANSI J.mailto:jfansi@doct.ulg.ac.be , HABRAKEN A.-M., BALAN T., LEMOINE X., LANDRON C., MAIRE, E., BOUAZIZ O., BEN BETTAIEB M. ‘Application of an advanced GTN model’ ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012 Volume 1, 2012, Pages 589-597 (Nantes; France; 2/4 July 2012)

5. FAVRE J., CHIBA A., KOIZUMI Y., FABREGUE D., MAIRE E. ‘Dynamic recrystallization of biomedical Co-Cr-W-Ni (L-605) alloy’, Materials Science Forum Volume 706-709, 2012, pp 472-4777th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC'2011; Quebec ; CANADA 1-5/08/2011

6. FAVRE J., KOIZUMI Y., CHIBA A., FABREGUE D., MAIRE E. ‘Recrystallization of L-605

cobalt superalloy during hot-working process’ (2012) TMS Annual Meeting, pp. 257-264 (Orlando, FL; USA; 11/15 March 2012);

7. FERNANDEZ V., BUFFETAUT E., MAIRE E., ADRIEN J., SUTEETHORN V., TAFFOREAU P. ‘Phase contrast synchrotron microtomography: Improving noninvasive investigations of fossil embryos in ovo’, Microscopy and Microanalysis 2012, volume 18 (1), pp. 179 -185

8. HILD F. , BUFFIERE J.-Y., GRAVOUIL A., LIMODIN N., RETHORE J., ROUX S., LUDWIG W. ‘Analysis of fractured samples with digital volume correlation Annual Conference on Experimental and Applied Mechanics’; Indianapolis, INDE; 7-10 June 2010 Conference Proceedings of the Society for Experimental Mechanics Series 2012, volume 4, pp. 327-330

9. MEHEUX M. STIENON A., FAZEKAS A., VINCENT A., BAUDRY G. ‘Influence of fiber flow on rolling contact fatigue life: Model validation for non-metallic inclusion’ ASTM Special Technical Publication 2012, Volume 1548 STP, pp 408-421 9th International Symposium on Bearing Steel Technologies: Advances in Rolling Contact Fatigue Strength Testing and Related Substitute Technologies; Tampa, FL;17-18 November 2011

10. MOUAWAD B., BUTTAY C., SOUEIDAN M., MOREL H., BLEY V., FABREGUE D., MERCIER F. ‘Sintered molybdenum for a metallized ceramic substrate packaging for the wide-bandgap devices and high temperature applications (2012)’ Proceedings of the International Symposium on Power Semiconductor Devices and ICs, art .no. 6229081, pp. 295-298.

11. MOUAWAD B., BUTTAY C., SOUEIDAN M., MOREL H., ALLARD B., FABREGUE D., BLEY V., ‘3-dimensional, solder-free interconnect technology for high-performance power modules’ 7th International Conference on Integrated Power Electronics Systems, CIPS 2012, Article number6170660 Nuremberg; Germany; 6/8 March 2012

12. RÉTHORÉ J., LIMODIN N., BUFFIÈRE J.-Y., ROUX S., HILD F. ‘Three-dimensional analysis of fatigue crack propagation using X-Ray tomography, digital volume correlation and extended finite element simulations (2012)’ Procedia IUTAM, 4, pp. 151-158

13. TERMENTZIDIS K. , BARRETEAU T., NI Y., HUEDRO H., DELAYE A.-L., ZIANNI X., CHALOPIN Y., CHANTRENNE P., VOLZ S. ‘Thermal conductivity and Kapitza resistance of diameter modulated SiC nanowires, a molecular dynamics study’ Journal of Physics: Conference Series Volume 395 (1), 2012, Article number012107 ; 6th European Thermal Sciences Conference, Eurotherm 2012; Poitiers; France; 4/ 7 September 2012;

2011 1. BANERJEE K., PEREZ M., MILITZER M. ‘Non-isothermal austenite grain growth kinetics

in the HAZ of a microalloyed X-80 linepipe steel’ Diffusion and Defect Data Pt.B: Solid State Phenomena Volume 172-174, 2011, pp. 809-814 International Conference on Solid-Solid Phase Transformations in Inorganic Materials, PTM 2010; Avignon; France; 6 / 11 June 2010; Code 85759

2.

BUTERI A., RÉTHORÉ J., BUFFIÈRE J.-Y., FABRÈGUE D., PERRIN E., HENRY S. Fatigue mechanisms of brazed Al-Mn alloys used in heat exchangers (2011) Conference Proceedings of the Society for Experimental Mechanics Series, 5, pp. 63-67

3. COURTOIS L., MAIRE E., PEREZ M., BRECHET Y., RODNEY D. ‘Mechanical properties of Monofilament entangled materials’ Conference Proceedings of the Society for Experimental Mechanics Series 2011, 5, pp. 33-38

4. DA CRUZ C.A., CHANTRENNE P., KLEBER X. ‘Molecular dynamics simulations and Kaptiza conductance prediction of Si/Au systems using the new full 2NN MEAM Si/Au cross-potential’) ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC

5. FABRÈGUE D., LANDRON C., BÉAL C., KLEBER X., MAIRE E., BOUZEKRI M. ‘Understanding the mechanical behaviour of a high manganese TWIP steel by the means of in situ 3D X ray tomography’ (2011) Conference Proceedings of the Society for Experimental Mechanics Series, 5, pp. 27-32

6. HILD F., FANGET A., ADRIEN J. , MAIRE E., ROUX S. ‘Three-dimensional analysis of a tensile test on a propellant with digital volume correlation’ Archives of Mechanics 2011, volume 63 (5-6), pp 459-478

7. LANDRON C., MAIRE E., ADRIEN J., BOUAZIZ O. ‘Damage characterization in dual-phase steels using X-ray tomography’ Conference Proceedings of the Society for Experimental Mechanics Series(2011), 5, pp. 11-18

8. MAIRE E., PERSSON GUIDA M., NAKAMURA N., JENSEN K., MARGOLIS, E., FRIEDSAM, C., SPAEPEN, F. ‘Three dimensional confocal microscopy study of boundaries between colloidal crystals’, Conference Proceedings of the Society for Experimental Mechanics Series, 5, pp. 69-74 (2011)

9. MISHRA A., LEGUEN C., THUILLIER S., MAIRE E. ‘Investigation of ductile damage in DP980 steel sheets using mechanical tests and X-ray micro-tomography’ AIP Conference Proceedings 2011, Volume 1353, pp. 1464-1469

10. MOUAWAD, B., SOUEIDAN M. , FABRÈGUE D. , BUTTAY C., BLEY V., ALLARD B. ‘Mechanical study of copper bonded at low temperature using Spark Plasma Sintering process’ Advanced Materials Research 2011, Volume 324, pp.177-180 1st Mediterranean Conference on Innovative Materials and Applications, CIMA 2011; Beirut; 15/17-03-2011; Code 86609

11. MURAKAMI K., YAMAGUCHI H., EDA G., FUJITA T., GUAN P., WANG W., GONG C., BOISSE J., MILLER S., ACIK M., CHO K. CHABAL Y.J., CHEN M., WAKAYA F., TAKAI M., CHHOWALLA M. ‘Field emission from atomically thin edges of reduced graphene oxide’, Proceedings of the International Display Workshops Volume 3, 2011, pp 1775-1778 18th International Display Workshops 2011, IDW 2011;Nagoya;7/9-12-2011

12. RHOUMA W.B., DESCHANEL S., WEISS J. ‘Collective dislocation dynamics and avalanches during fatigue of aluminum’ AIP Conference Proceedings 2011, volume 1389, pp. 1536-1539

13. SINCLAIR C.W. , PEREZ M., Ordering in highly supersaturated alpha-Fe-C Diffusion and Defect Data Pt.B: Solid State Phenomena Volume 172-174, 2011, pp. 996-1001 International Conference on Solid-Solid Phase Transformations in Inorganic Materials, PTM 2010; Avignon; France; 6 /11June 2010; Code 85759

2010 1. BADEL P., MAIRE E., VIDAL-SALLÉ E., BOISSE P. ‘Mesoscopic mechanical analyses of

textile composites: Validation with x-ray tomography ‘(2010) Lecture Notes in Applied and Computational Mechanics, 50 LNACM, pp. 71-78

2. BUFFIÈRE J.-Y., LIMODIN N., RÉTHORÉ J., LUDWIG W., HILD F., GRAVOUIL A., ROUX S. ‘3D characterization of fatigue cracks using X-ray tomography: From synchrotron to laboratory sources’ (2010) TMS Annual Meeting, Seattle, WA; 14/18 February 2010 volume 2, pp. 705-712

3. BUFFIERE J.-Y., MAIRE E., ADRIEN J., MASSE J.-P., BOLLER E. ‘In situ experiments with X ray tomography: An attractive tool for experimental mechanics’ (2010) Proceedings of the Society for Experimental Mechanics, Inc., 67, pp. 289-305

4. CAZOTTES S., ZHANG Z.L., DANIEL R., CHAWLA J.S., GALL D., DEHM G. ‘Structural characterization of a Cu/MgO(001) interface using C S-corrected HRTEM’. Thin Solid Films 2010, volume 519 (5), pp. 1662-1667

5. CHARMETANT A., WENDLING A., HIVET G., VIDAL-SALLÉ E., MAIRE E., BOISSE P. ‘Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale’ (2010) Proceedings of the 10th International Conference on Textile Composites - TEXCOMP 10: Recent Advances in Textile Composites, pp. 135-142

6. DANCETTE S., MASSARDIER V., MERLIN J., FABRÈGUE D., DUPUY T. ‘Investigations on the mechanical behavior of advanced high strength steels resistance spot welds in cross tension and tensile shear’. Advanced Materials Research 2010, volume 89-91, pp. 130-135

7. HILD F., BUFFIÈRE J.-Y., GRAVOUIL A., LIMODIN N., RÉTHORÉ J., ROUX S., LUDWIG W. ‘Analysis of fractured samples with digital volume correlation (2010)’ Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010, 3, pp. 1965-1968

8. KING A., SCHELL N., MARTINS R.V., BECKMANN F., RUHNAU H.-U., KIEHN R., MARROW J., LUDWIG W., SCHREYER A. ‘Grain tracking at the high energy materials science beamline of the Petra III synchrotron radiation source’. Materials Science Forum 2010, volume 652, pp. 70-73

9. MAIRE E., ADRIEN J., HILD F., ROUX S., WITZ J.-F. ‘Digital x-ray tomography volume correlation of rock wool during compression’ Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010, volume 3, pp. 1945-1946

10. STIENON A., FAZEKAS A., BUFFIERE J.-Y., DAGUIER P., MERCHI F., VINCENT A. ‘A new methodology for predicting fatigue properties of bearing steels: From x-ray micro-tomography and ultrasonic measurements to the bearing lives distribution’ (2010) ASTM Special Technical Publication, 1524 STP, pp. 141-159

2009 1. AMIRECHE, R., MORIN M. ‘A new stress-induced martensitic transformation in a Cu-Al-

Be shape memory single crystal (2009)’ Proceedings of the International Conference on Martensitic Transformations, ICOMAT-08, pp. 577-580

2. BADEL P., VIDAL-SALLÉ E., MAIRE E., BIGORGNE L., BOISSE P. ‘Simulation and tomography analyses of textile composite reinforcement’ (2009) ICCM International Conferences on Composite Materials

3. BAREGGI A., MAIRE E., GITON M., BOUAZIZ O., DIMICHIEL M. ‘Analysis of damage in metallic materials by X-ray tomography’ 12th International Conference on Fracture 2009, ICF-122009, Volume 6, 2009, pp. 4471-4477, ICF-12;Ottawa, ON;12-17July 2009

4. v BOUCHARD P.O., BOURGEON L., LOGE R.E., VERDU C., MAIRE E. ‘A multiscale analysis of ductile steel grades damage and fracture mechanisms’ 12th International Conference on Fracture 2009, ICF-12 Volume 9, pp.7166-7173 ICF-12;Ottawa, ON;12 - July 2009

5. CASTRO E., MARTIN F., LALLART M., RICHARD C., MONNIER T. Semi-passive damping solutions for autonomous vibration control systems on aircrafts, Proc.of Smart Structures and Materials (SMART’09), July 09, Porto, Portugal

6. COTTRINO S., ADRIEN J., JORAND Y. ‘Preparation of highly concentrated nanosized alumina suspensions for spray-drying’ (2010) Ceramic Engineering and Science Proceedings, 30 (8), pp. 221-231. Conference name: Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III - 33rd International Conference on Advanced Ceramics and Composites 18/23-01-2009, Daytona Beach, FL

7. DANCETTE, S., MASSARDIER, V., MERLIN, J., FABRÈGUE, D., DUPUY, T. Investigations on the mechanical behavior of advanced high strength steels resistance spot welds in cross tension and tensile shear (2010) Advanced Materials Research, 89-91, pp. 130-135. Conference name: 6th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2009 25 - 29 August 2009, Berlin

8. DUMAS D., LANI F., ALEXIOU K. and MONNIER T. ‘Numerical simulations of a vibrating composite panel to predict its behaviour for damage detection using Lamb Waves’, Smart Proc.of Structures and Materials (SMART’09), July 09, Porto, Portugal

9. DUMAS D., LANI F., NAWROCKI A., LOYER J, GRAND S., MONNIER T.,

LALLART M. ‘Autonomous Damage and Vibration Control Systems: Overview of the ADVICE project and its interest for aeronautics’, Proc.of Smart Structures and Materials (SMART’09), July 09, Porto, Portugal

10. KING A., SCHELL N., MARTINS R.V., BECKMANN F., RUHNAU H.-U., KIEHN R., MARROW J., LUDWIG W., SCHREYER A. ‘Grain tracking at the high energy materials science beamline of the Petra III synchrotron radiation source’ (2010) Materials Science Forum, 652, pp. 70-73. 5th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation, MECA SENS V/3rd International Symposium of Quantum Beam Science Directorate of Japan Atomic Energy Agency, QuBS2009 10 - 12 November 2009,Mito

11. LIMODIN N., BUFFIÈRE J.Y., RÉTHORÉ J., HILD F., ROUX S., LUDWIG W. ‘Three-dimensional study of fatigue crack propagation using synchrotron X-ray microtomography’ 12th International Conference on Fracture 2009, ICF-12 2009,Volume 4, pp. 2961-2970, Ottawa, ON;12-17 July 2009

12. MAIRE E., CATY O., BOUCHET R., LORETZ M., ADRIEN J. ‘Modelling the mechanical and thermal properties of cellular materials from the knowledge of their architecture ‘(2009) Materials Research Society Symposium Proceedings, 1188, pp. 35-42

13. MAIRE E., CATY O., KING A., ADRIEN J. ‘X ray tomography study of cellular materials: Experiments and modeling ‘(2009) IUTAM Bookseries, volume 12, pp. 35-42

14. MARROW T.J., KING A., REISCHIG P., ROLLAND DU ROSCOAT S., LUDWIG W. ‘Diffraction contrast tomography of polycrystalline alumina’ Materials Science and Technology Conference and Exhibition 20, MS and T'09, volume 1, pp. 489-499

15. MASSARDIER V., NGANSOP A., FABRÈGUE D., MERLIN J. Microstructure and mechanical properties of low carbon Al-killed steels after ultra-rapid annealing cycles(2010) Materials Science Forum, 638-642, pp. 3368-3373. The Minerals, Metals and Materials Society (TMS)6th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2009, 25 - 29 August 2009, Berlin

16. PARDOEN T., SCHEYVAERTS F., TEKOGLU C., LECARME L., FABRÈGUE D., ONCK P.R. ‘Recent progress in micromechanics-based modeling of void coalescence (2009) Society for Experimental Mechanics’ SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2009, 2, pp. 912-918

17. RÉTHORÉ J., LIMODIN N., BUFFIÈRE J.-Y., GRAVOUIL A., HILD F., ROUX S. Experimental evaluation of stress intensity factors along three dimensional crack fronts during fatigue test 12th International Conference on Fracture 2009, ICF-12 volume 9, 2009, pp 6831-6836

18. STIENON A., FAZEKAS A., BUFFIERE J.-Y., DAGUIER, P., MERCHI F., VINCENT A. ‘A new methodology for predicting fatigue properties of bearing steels: From x-ray micro-tomography and ultrasonic measurements to the bearing lives distribution’(2010) ASTM Special Technical Publication, 1524 STP, pp. 141-159. ASTM 8th International Symposium on Bearing Steel Technology: Developments in Rolling Bearing Steels and Testing 21 - 22 May 2009 Vancouver

19. TERZI S., SALVO L., SUÉRY M., ADRIEN J., MAIRE E., BOLLER E. ‘In-situ X-ray microtomography investigation of the deformation mechanisms of Al-Cu alloys in the semi-solid state’, Materials Science Forum 2009, volume 618 619, pp. 275-278

20. TUNCER N., SALVO L., MAIRE E., ARSLAN G. ‘A preliminary study on cell wall architecture of titanium foams’ (2009) Materials Research Society Symposium Proceedings, 1188, pp. 43-48

21. ZHOU S., MAIRE E., XIE J., BAREGGI A., ADRIEN J., DIMICHIEL M. ‘Damage assessment of Al alloys using in situ tensile tests in X ray tomography’ (2009) Proceedings of SPIE - The International Society for Optical Engineering, 7375, art. no. 73756F