identification automatique et capture de données aidc 7 aidc.pdf · ... all copyright laws as they...
Post on 09-Sep-2018
218 Views
Preview:
TRANSCRIPT
GOL 510, Cours 07 Organisation flexible de la production
(4cr.)
Session : AUTOMNE 2011
Identification automatique et capture de données
AIDC
Programme de baccalauréat en génie des opérations et de la logistique
École de technologie supérieure, Montréal, QC.
IDENTIFICATION
AUTOMATIQUE & CAPTURE
DE DONNÉES
AIDC (Automatic Identification and Data Capture)
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Identification Automatique & Capture
de Données
Paln :
1. Présentation des méthodes d'identification automatique
2. Technologie des code à barres
3. Identification par radiofréquence (RFID)
4. Autres technologies AIDC (Automatic Identification and
Data Capture)
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Identification Automatique & Capture
de Données
Une famille de technologies qui fournissent une entrée
directe des données dans un ordinateur ou un système à
microprocesseur sans utiliser un clavier ou autre méthode
manuellle.
Raisons pour l'utilisation de l'AIDC:
1. L'exactitude des données
2. Actualité (rapidité de publication)
3. La réduction du temps de travail
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Alternative à AIDC: Les méthodes manuelles de collecte et de saisie
de données
Problèmes avec la collecte et la saisie manuelle de données:
1. Les erreurs humaines
Lorsque les données sont collectées et saisies
manuellement
2. Le facteur temps
Délai entre la survenue des activités et des
événements et l'entrée de données associées
Les méthodes manuelles consomment,
intrinsèquement, beaucoup de temps
3. Coût du travail
Coût de de travailleurs humains à temps plein
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Les applications de AIDC
Les ventes au détail et le contrôle des stocks
Manutention
Expédition et réception, tri, préparation des commandes,
du courrier et de colis
Opérations d'usine
Le traitement des commandes, suivi des travaux en
cours, utilisation des machines, la présence des
travailleurs
Autres
L'identification des patients dans les hôpitaux, traitement
des chèques dans les banques, système de sécurité
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Composantes d’un system AIDC
Presque toutes les technologies AIDC se composent de
trois éléments principaux, qui sont des étapes
séquentielles dans l'AIDC:
1. Encodage de données – les caractères alphanumériques
sont convertis au format lisible par machine
2. Appareil de lecture ou de la numérisation – le scanner lit
les données encodées et les convertit en forme
alternative, habituellement un signal électrique
3. Le décodage des données – le signal électrique est
transformé en données numériques et enfin de retour aux
caractères alphanumériques d’origine
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Les technologies AIDC
1. Optique
Codes à barres (linéaires et 2-D), la reconnaissance
optique de caractères (OCR), la vision industrielle
2. Électromagnétique
Identification par radiofréquence (RFID)
3. Magnétique
Les données sont codées magnétiquement, semblable
à une bande magnétique (par exemple, les cartes de
crédit en plastique, les chèques bancaires)
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Les technologies AIDC
4. Carte à puce
Petites cartes plastique incrustée avec des puces
(circuits intégrés)
5. Techniques tactile
Les écrans tactiles
6. Biométriques
La reconnaissance vocale, analyse des empreintes
digitales, les scans de la rétine
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Mesures de précision de lecture AIDC
1. Taux de première lecture (FRR: First Read Rate)
Probabilité de succès d'une (bonne) lecture par le
scanner dans sa première tentative
2. Taux d'erreur de substitution (SER: Substitution error rate)
Probabilité que le scanner lit incorrectement le caractère
codé comme un autre caractère
Dans un ensemble de données codées contenant n
caractères, le nombre attendu d'erreurs = SER multiplié
par n
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
La technologie des codes à barres
Les codes à barres sont de deux types de base:
1. Linéaire (une dimension)
Les données codées sont lues en utilisant un balayage
linéaire du scanner
2. Deux dimensions
Données encodées doivent être lus dans les deux
directions
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Les codes à barres linéaire
Deux formes de codes à barres linéaires:
1. Modulés en largeur
Symbole composé de barres et d'espaces de largeur
variable
Plus largement utilisé (par exemple, code universel
des produits – UPC: Universal Product Code)
2. Modulés en hauteur
Symbole composé de barres et d'espaces de hauteur
variable
Utilisé uniquement par le service postal américain pour
l'identification de code postaux
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Les codes à barres linéaire
(a) (b)
(a) Code à barre modulé en largeur, illustrée ici par le
code universel de produit (CUP)
(b) Code à barre modulé en hauteur, illustré par Postnet,
utilisé par le service postal américain
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Signal de détresse ‘SOS’ représenté
en "Morse" par des codes à barres
Le problème avec les codes "Morse" à barre est : (1) que
seules les barres sombres sont utilisés, augmentant ainsi
la longueur du symbole codé, et (2) le nombre de barres
qui composent les caractères alphanumériques diffère, ce
qui rend plus difficile le décodage
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Lecture des codes à barres
(a)
(b)
La conversion du code à barres en un train d'impulsions
électrique: (a) code à barres et (b) signal électrique
correspondant
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Code 39 (Code 3 sur 9 ou Alpha39)
Un groupement typique
de caractères pour
former un code à barres
dans le code 39.
Le codage de chaque
caractère est la
succession de 9 bits dont
exactement 3 sont à 1
(barre large)
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
USD-2
Character Set
USD-2 est un sous ensemble
de Code 39
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Lecteurs des codes à barres linéaires
Habituellement classés comme suit:
1. Avec Contact
Des crayon optiques légers utilisés en déplaçant la
pointe rapidement sur le code-barres
2. Sans Contact
Les lecteurs focaliser un faisceau de lumière sur le code
à barres et un photo-détecteur lit le signal réfléchi
1. Faisceau fixe - faisceau lumineux (laser) fixe
2. Faisceau mobile - faisceau lumineux (laser) utilisant
un balayage angulaire pour rechercher le code à
barres
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Scanneur pour les codes à barres
Scanneur utilisant un faisceau mobile pour lire le code à
barre des articles sur le convoyeur
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Exempled de feuille de route utilisant
le code à barres
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Les codes à barres à deux dimensions
Introduits pour la première fois en 1987
Deux types de base des symboles de codes à barres 2D
1. Codes à barres empilés
Se compose de plusieurs lignes de codes à barres
traditionnels empilés l’un sur l'autre
2. Symbologie matrice
Se compose de modèles 2-D de cellules de données
qui sont habituellement carrés et sont de couleur
foncée ou blanche
Avantage par rapport aux codes à barres empilées est
la capacité de contenir plus de données
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Codes à barres empilés 2D
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Codes à barres Matrice 2D
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Identification par radiofréquence (RFID)
La RFID utilise une étiquette d'identification électronique
contenant les données codées et qui est attachée au
produit.
Le tag se compose d'une puce électronique (mémoire) et
d‘une antenne, généralement enfermé dans un contenant en
plastique
Le tag est un transpondeur - un dispositif capable
d'émettre un signal quand il reçoit un signal provenant
d'une source externe
Le tag communique les données encodées par RF
quand le produit passe devant un lecteur et est activé
par un champ magnétique émis par le lecteur
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Identification par radiofréquence (RFID)
La RFID représente le plus grand défi à la prédominance
des codes à barres
Wal-Mart, Target et Metro AG (Allemagne) ont imposé à
leurs fournisseurs l’utilisation de la RFID sur les matériaux
entrants
Selon une étude de Wal-Mart «les magasins RFID sont
63% plus efficace dans la reconstitution des articles en
rupture que les magasins traditionnels»
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Les types de tags RFID
1. Les étiquettes passives
N'ayant aucune source d'énergie interne
Ils tirent leur énergie électrique à partir du signal
externe émis par le lecteur
Plus petit, moins cher, plus durable
2. Les étiquettes actives
Ont leurs propres packs de batterie
Posséder une capacité mémoire accrue et de plus
longue portée de la communication
Coût plus élevé et utilisés pour des articles de plus
grande valeur
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Applications industrielles du RFID
La gestion des stocks
Gestion de la Supply-chain
Les systèmes de suivi
Contrôle des entrepôt
Identification des lieus
Suivi des encours
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
RFID: Avantages & Inconvénients
Avantages
Identification ne dépend ni de contact physique ni de
ligne de vue directe
Beaucoup plus de données peuvent être contenues
dans l'étiquette d'identification qu'avec la plupart des
technologies AIDC
Les données sur les tags ‘lecture/écriture’ peuvent être
modifiées à des fins d'utilisation historiques ou de
réutiliser l’étiquette
Inconvénients
Plus cher que la plupart des autres technologies AIDC
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Codes à barres vs. RFID
Comparaison Codes à barres RFID
Technologie Optique ondes électromagnétiques
(RF)
Lecture-écriture Lecture seule Lecture et écriture
Capacité de la
mémoire 14 à 16 caractères (linéaire) 96 à 256 caractères
Ligne de mire pour
lecture Requise Non requise
Réutilisation Une seule utilisation Réutilisable
Coût Très faible coût par étiquette Approx 10X coût du code à
barres
Durabilité Sensible à la saleté et aux
rayures
Plus durables en milieu de
fabrication
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
Autres technologies AIDC
Bandes magnétiques
Utilisé pour les cartes de crédit et cartes de débit
Plus cher que les codes à barres
Doivent être en contact avec le scanner pour la lecture
Reconnaissance optique de caractères (OCR)
Peut être lu par les humains et les machines
Faible taux de ‘first read rate’
La vision industrielle
Application principale est l'inspection
Utilisé avec des symboles 2D optiques
Références
Chapitre 12 du manuel
http://aidc100.org/files/Allais-_David_Memoirs.pdf
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.
top related